NEW PRODUCTS FOR 2013
|
|
- Jasmine Robbins
- 5 years ago
- Views:
Transcription
1 NEW PRODUCTS FOR 2013
2 URX IV One of the initial designs which firmly established Knight s Armament in the firearms industry was the original RIS, or Rail Interface System. This free-floating, continuous top-rail system allowed a shooter to freely optimize their weapon with necessary accessories without compromising their weapon s integrity or accuracy. Knight s continued to improve this design with the introduction of the URX models which featured improved strength while reducing weight, integrated flip-up iron sights, and slick-sided models that further reduced weight and provided a more natural grip. The latest offering from KAC is the URX IV. The URX IV is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX IV is currently available for 5.56 rifles in 8.5, 10, 13, and 14.5 lengths, and is equipped with Knight s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX IV, Knight s Armament Co. demonstrates its continuing determination to intelligently design effective products.
3 5.56 URX IV KIT P/N: Length 8.5 KIT P/N: Length 10.0 KIT P/N: Length 13.0 KIT P/N: Length 14.5 KITS INCLUDE SHIM SET AND WRENCH
4 KEYMOD ACCESSORIES P/N: BARRIER STOP P/N: REAR 300M MICRO SIGHT BELT HOOK P/N: P/N: FRONT MICRO SIGHT SLING HOOK P/N: 30749
5 KEYMOD ACCESSORIES P/N: SLING MOUNT 5-SLOT RAIL P/N: SLOT RAIL P/N: P/N: FULL SIDE RAIL FITS 13.0 AND 14.5 URX IV
6
7
8 URX IV ACCESSORIES A P/N: GAS BLOCK KIT FITS.75 BARRELS B PANEL KIT, URX IV INCLUDES: A x5, B x2 P/N: P/N: FLAT PANEL, URX IV
9 5.56 URX 3.1 Length 8 P/N: P/N: Length Length 13.5 P/N: 30325
10 URX 3.1 ACCESSORIES P/N: SLING SWIVEL P/N: HANDSTOP KIT P/N: RIB RAIL SECTION KIT A B C D E F PANEL KITS PANEL KIT P/N: INCLUDES: B x1, C x2, D x1 PANEL KIT, LONG P/N: INCLUDES: A x2, B x1, D x1 PANEL KIT, DELUXE P/N: INCLUDES: A x2, B x1, C x2, D x3, E x3, F x1 P/N: SLING HOOK KIT P/N: BELT HOOK KIT
11 UNIVERSAL RAIL ACCESSORIES P/N: QD BIPOD MOUNT SWIVEL P/N: DEGREE, OFFSET RAIL MOUNT KIT P/N: RAILED RISER, LOW P/N: QD BIPOD MOUNT SWIVEL/PAN P/N: THUMB REST P/N: RAILED RISER, HIGH
12 TM Knight s Armament Company. Designed and Printed in the USA. No part of this publication may be reproduced without the explicit prior consent of Knight s Armament Co. Products, product specifications, nomenclature, and availablilty are all subject to change without notice, and may be shown with optional accessories which are not standard inclusions. Knight s Armament Co. is an ISO 9001 Certified Company. Colt, H&K, Advanced Armament Co., 300 Blackout, and all other names or products are the sole property of their respective owners. 701 Columbia Blvd. Titusville, FL P: F:
knightarmco.com product catalog
knightarmco.com product catalog 2 Knight s Armament Company TABLE OF CONTENTS COMPANY BIO SR-25 SERIES RIFLES SR-30 SERIES RIFLES SR-15 SERIES RIFLES UPPER RECEIVER ASSEMBLY KITS SIGNATURE REDUCTION DEVICES
More informationMICRO WHEN SPEED AND ACCURACY MATTER USER MANUAL
WHEN SPEED AND ACCURACY MATTER USER MANUAL FEATURES AND ADVANTAGES The most cost effective conversion kit. The quickest conversion kit assembly on the market today. Toolless installation and no pistol
More informationRequirements to Current and Future Small Arms. Commercial in Confidence
Requirements to Current and Future Small Arms Prepared by: Rolf Hezel Authorized by: Wolfgang Bantle 8.5.2007 Table of Contents SA80 Requirements to Current and Future small arms 41 Weapon Family XM 320
More informationAssembling an AR-15 Parts CheckList:
Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts.............................. A, A2 & A3 sights............................................. 2-3 BARREL COMPONENTS.........................................
More informationKeppeler Sporting Rifles
Quality for top Scorers Keppeler Sporting Rifles Modular Sporting Rifles Metal Stock K0 0 9 9 Order No. 000 Metal stock Free Rifle K0 (,kg) Order No.000 Front sight carrier Order No. 0000 Metal stock Standard
More informationCJRK Tactical Riflescope Mount
USER MANUAL CJRK Tactical Riflescope Mount SM34004 English ENGLISH FEATURES: Quick detach weaver/picatinny mount Quick detach provides return to zero Cantilever design provides proper eye relief on various
More informationQ'ty needed for quotes. No Item No. Description Image. Barrel Parts. Handguard Snap Ring Material: SK5 1 MS Weld Spring Material: 1075
Barrel Parts 1 MS16626-1137 2 8448555 3 8448712 4 9349054BN-01 5 9349054BE 6 A01-0036 7 9349054BIP 8 8448567 9 G02-0001 10 1005-914-3504 11 G02-0002 12 9349054FSHA 13 MS16562-106 14 8448571 15 8448697
More informationENGINEERED TO OUTPERFORM
ENGINEERED TO OUTPERFORM 2 0 0 9 ENGINEERED TO OUTPERFORM Established in 1988, KWA has been the leading designer and manufacturer of airsoft replica weapons for law enforcement and military training simulations.
More informationLone Star Field Products
537 Easy Street, Garland, Texas 75042 www.lonestarfieldproducts.com 972-276-3110 Lone Star Field Products Spec-Rest Sportsman Field & Modular Sniper Optimization Platform MODSOP User s Manual Copyright
More informationQ'ty needed for quotes. No Item No. Description Image. Barrel Parts. Handguard Snap Ring Material: SK5 1 MS Weld Spring Material: 1075
Barrel Parts 1 MS16626-1137 2 8448555 3 8448712 4 9349054BN-01 5 9349054BE 6 A01-0036 7 9349054BIP 8 8448567 9 G02-0001 10 1005-914-3504 11 G02-0002 12 9349054FSHA 13 MS16562-106 14 8448571 15 8448697
More information110 gr. GMX TAP #80875 Polymer Tipped Copper Alloy Bullet B.C. =.305 BLACKOUT. Hornady Product Summary. B.C. = Ballistic Coefficient
110 gr. GMX TAP #80875 Polymer Tipped Copper Alloy Bullet B.C. =.305 The 300 Blackout TAP offers excellent barrier performance from 10-16" barreled rifles. The monolithic copper alloy bullet design fouls
More informationCREATORS OF PRECISION
CREATORS OF PRECISION When our new brand was launched, it naturally aroused much interest. Who was working on this project? Who were the technicians and engineers who make up Victrix Armaments? Who was
More informationSpecial Gun Cabinets For Law Enforcement. LE Catalog
Special Gun Cabinets For Law Enforcement LE Catalog 2018 Firearms & Equipment Storage Adjustable Mounting System Floor or Wall Mounted Digital or Keyed Lock Our gun cabinets are manufactured in Allen,
More informationAbout the Small Arms Survey
About the Small Arms Survey The Small Arms Survey is a global centre of excellence whose mandate is to generate evidencebased, impartial, and policy-relevant knowledge on all aspects of small arms and
More informationThe Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM
The Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM 898.00. The Whiskey-3 rifle stock DETAILED DESCRIPTION - Call ~ 01507 343898 or 0774 7771962 The Whiskey-3 Chassis (W3C) (Generation V Chassis)
More informationStandard Direct Impingement AR-15 Parts Check List
Standard Direct Impingement AR-15 s List UPPER RECEIVER COMMON PARTS 1. Select (1) of the following UPPER RECEIVER options: Complete Upper Receiver with Barrel, or Complete Upper Receiver Without Barrel
More informationRRA Rifle/Upper Half Identification. RRA Warranty Information. RRA Order/Return Information
MADE IN U.S.A. MADE IN U.S.A. In 1996, brothers Mark and Chuck Larson founded Rock River Arms in an 1,800 square foot shop in Cleveland, Illinois. Mark and Chuck together brought over 40 years of varied
More informationCAPT JT Elder Commanding Officer NSWC Crane
KeyMod vs. M-LOK Modular Rail System Comparison Abstract #19427 Presented By: Caleb McGee Date: 4 May 2017 CAPT JT Elder Commanding Officer NSWC Crane Dr. Brett Seidle, SES Technical Director NSWC Crane
More informationProduct overview IMPROVING ROBOT FLEXIBILITY. Tool changers Swivels Swivel tool changers Hose packages Valve units Grippers Tool systems Tool stands
Product overview IMPROVING ROBOT FLEXIBILITY Tool changers Swivels Swivel tool changers Hose packages Valve units Grippers Tool systems Tool stands TC - Tool changers High repeatability with RSP tool changers
More informationMODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines)
DATE February, 2010 MODEL : TM-1882 CRANE SPECIFICATIONS MAXIMUM LIFTING CAPACITY 17,000kg@1.5m(6-part lines) BOOM WINCH SWING 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal
More informationVISIT LMT DEFENSE.COM FOR PRICING INFORMATION
rifles now available in 4 colors! See your Dealer for Details Titanium Gray burnt bronze 2019 od green flat dark earth We will offer exceptional quality products to our customers by continuously striving
More informationTPG-3 A4 PRECISION SNIPER RIFLE
TPG-3 A4 PRECISION SNIPER RIFLE Unique Alpine TPG-3 A4 MODULAR PRECISION SNIPER RIFLE The new benchmark in precision, modularity and interchange ability, designed to perform under the most critical missions
More informationDOLARIAN CAPITAL, INC.
New, Used & Refurbished Weapon Systems www.dolarian.com AMMUNITION HIGH STNADARD A LL RIFLE MANUFACTURED NEW TO U NITED S TATES M ILITARY S PECIFICATIONS COMMANDO 7.5 Barrel Flat Top, 5.56mm NATO, Collapsing
More informationww w.inyathi.net T e l n o: i i nyathi. n e t Gunsmithing
ww w.inyathi.net T e l n o: 0 1 2 8 0 8 9 9 1 1 i nfo@ i nyathi. n e t 0030 ISS FOLDER DEVIDERS.indd 9 Gunsmithing G un s mi t h i n g 2016/07/18 1:37 PM BERSERK The material is a 15% fiberglass reinforced
More informationPRECISION REFLEX. Thank you for your past support and we look forward to helping you in the future. Sincerely, All of the staff at PRI
PRECISION REFLEX Precision Reflex, Inc., (PRI) is a family owned business that was started on January 1, 1979, to manufacture shooting accessories for all types of firearms and many different styles of
More information22/42 SAKO DEFENCE DEFENCE AND LAW ENFORCEMENT
DEFENCE & law enforcement SAKO DEFENCE SAKO Ltd based in Riihimäki, Finland, is a leading European sniper rifle manufacturer and a member of the Italian based Beretta Holding Group. SAKO Ltd is known
More informationThompson/Center. Suggested Loads, Assembly, Disassembly & Cleaning Instructions For The Cap Lock or Flint Lock Fire Storm Only!
Thompson/Center Suggested Loads, Assembly, Disassembly & Cleaning Instructions For The Cap Lock or Flint Lock Fire Storm Only! Read and Understand the booklet entitled, Shooting Thompson/Center Black Powder
More informationSTEYR ARMS 3 SUB-MOA GUARANTEE ON ALL BOLT ACTION RIFLES
STEYR ARMS SUB-MOA GUARANTEE ON ALL BOLT ACTION RIFLES STEYR PISTOLS 4-7 STEYR AUG A3 M1 8-11 STEYR PRECISION RIFLES STEYR PRO THB 13 STEYR SSG 04 14-15 STEYR SSG 08 16-17 STEYR SSG 08-A1 18-19 STEYR HS.50-M1
More informationBROWNING.50 M2 MACHINE GUN, ASSEMBLY
Parts Catalog BROWNING.50 M2 MACHINE GUN, ASSEMBLY Page 1 DEC 2016 PCOOWM2HB phone: 440.285.3481 fax: 440.286.8571 web: ohioordnanceworks.com OOW M2 Configurations M2 HB SKU: 7265636 M2 QCB SKU: M2A1-100E
More information2014 Lancer Systems all rights reserved
2014 Lancer Systems all rights reserved PROPRIETARY NOTICE: This contains Lancer Systems confidential, proprietary and/or competition sensitive data. ITAR NOTICE: Warning This document contains technical
More informationSAKO DEFENCE. Our mission remains to offer our customers the very best in accuracy and performance.
2 SAKO DEFENCE Sako Ltd based in Riihimäki, Finland, is a leading European sniper rifle manufacturer and a member of the Italian based Beretta Holding Group. Sako Ltd was established in 1921. From a traditional
More informationARES Defense Systems, Inc Independence Day Freedom Sale Price List ARES-15 MCR BELT-FED RIFLES
ARES-15 MCR BELT-FED RIFLES HANDGUARD SALE MCR-013 5.56 MM Heavy, Chrome-Lined 16.25" ADJ CARBINE SP SIGHTS MIL-STD 1913 $4,450.00 $4,075.00 MCR-014 5.56 MM Heavy, Chrome-Lined 16.25" ADJ CARBINE NIT SIGHTS
More informationSAKO DEFENCE. Our mission remains to offer our customers the very best in accuracy and performance.
SAKO DEFENCE Sako Ltd based in Riihimäki, Finland, is a leading European sniper rifle manufacturer and a member of the Italian based Beretta Holding Group. Sako Ltd was established in 1921. From a traditional
More informationPerformance Center revolvers, pistols, sporting rifles are the embodiment of old-world hand craftsmanship and modern technology.
64 Performance Center revolvers, pistols, sporting rifles are the embodiment of old-world hand craftsmanship and modern technology. The Performance Center offers sophisticated shooters limited run, uniquely
More informationSECOND STAGE REGULATOR
SECOND STAGE REGULATOR TAL 7012 (L) Rev. 1 MSA 2007 Prnt. Spec. 10000005389 (I) Mat. 10064393 Doc. 10064393 Firehawk Second Stage Regulator Assembly Second Stage w/hose Ass'y Push-To-Connect 10033170 24"
More informationTLR-2 RaiL MounTed TacTicaL LighT with LaseR sight
TLR-2 RaiL MounTed TacTicaL LighT with LaseR sight Case Material: Dimensions: Weight: Lens: Light Source: Light Output: On/Off: Run Time: Battery: Features: Approvals: Warranty: 6000 Series machined aircraft
More informationPremAire Cadet Escape Respirator: Second Stage Regulator
PremAire Cadet Escape Respirator: Second Stage Regulator MAINTENANCE AND REPAIR MSA 115 (L) Rev. 1 MSA 2011 Prnt. Spec. 10000005389(I) Mat. 10110430 Doc. 10110430 Item P/N Description 1 697453 O-ring,
More informationInstallation Instructions
FORD 20K Industry Standard Rail Custom Mounting Kit #2766 Gross Trailer Weight (Maximum)...20,000 lbs. Vertical Load Weight (Max. Pin Weight)...5,000 lbs. SYSTEM TOW CAPACITY Please note, in order to determine
More informationSee more at warsport.com
2016 Through a superior process of design and engineering, our products are built to a custom standard providing remarkable accuracy and a meticulous quality that remains unmatched across the industry.
More informationMPz.B mm AT.RIFLE SS ff WEAPON
MPz.B.41 7.92 mm AT.RIFLE SS ff WEAPON Antitank rifles were effective against lightly armored vehicles. Germany's Waffen SS were the elite troops of the German Army. They prided themselves on their daring,
More informationAssembly and Modular Table Power System Installation Instructions for Train Tables
Assembly and Modular Table Power System Installation Instructions for Train Tables Table of Contents Topic Attach Stretcher to Legs Attach Base To Table Top Attach Modesty Panel to Assembly Page 2 3 4
More informationProduct Manager Individual Weapons Overview For the Small Arms Symposium & Exhibition National Defense Industrial Association
Product Manager Individual Weapons Overview For the Small Arms Symposium & Exhibition National Defense Industrial Association BG R. Mark Brown Program Executive Officer Soldier 19-22 May 2008 LTC Tim Chyma
More informationIntroducing ECO e PLUS
Common Rail System and Diesel Particulate Filter (DPF) Muffler The Common Rail System (CRS) electronically controls the fuel injection timing and amount in stages rather than all at once for optimal combustion.
More informationTrouble Shooting Guide For HIPERTOUCH Series Triggers
1 PROBLEM: No Hammer Fall Scenario #1 1) The hammer does not fall when the trigger is pulled when the gray (plain) toggle springs are installed; but, nudging the hammer will cause it to fall. When the
More informationOPW Installation and Maintenance Instructions OPW Series Primary and Secondary Bucket Replacement Instructions
OPW Installation and Maintenance Instructions OPW 1-3100 Series Primary and Secondary Bucket Replacement Instructions IMPORTANT: Please read these warnings and follow the assembly instructions completely
More informationXOCET RIMFIRE RIFLE FEATURES. Carbon Fibre. Sporter. Made in Germany Ambidextrous Lightweight full size Polymer Stock
1 At Webley & Scott, we can trace our origins and heritage back to 1790 in Birmingham, England. Available throughout the world, Webley & Scotts time proven ethos of combining heritage with technology whilst
More informationARES Defense Systems, Inc Retail Price List - Page 1 ARES-15 MCR (MISSION CONFIGURABLE RIFLE) (SEMI-AUTO)
CALIBER MAG or BELT- FEED CONTOUR LENGTH GAS STOCK REGULATOR FEED TRAY HANDGUARD MCR-013 5.56 MM Belt Feed Heavy 16.25" ADJ CARBINE SP SIGHTS MIL-STD 1913 $4,450.00 $4,075.00 MCR-014 5.56 MM Belt Feed
More informationEngineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
More informationTechnical data Demag D-SH SpeedHoist
Technical data Demag D-SH SpeedHoist 42374245.eps 060510 enen 203 533 44 714 IS 852 Manufacturer Demag Cranes & Components GmbH P.O. Box 67 58286 Wetter (Germany) Telephone +49 (0) 2335 92-0 Telefax +49
More informationThis is an aluminum-case PowerGlide Transmission out of a 1966 Chevelle.
Removal Procedures ***Take a picture of the transmission and note the lever positions (Transmission Arm Lever points up and Kickdown Lever point down)*** This is an aluminum-case PowerGlide Transmission
More informationXPC PIN CLAMPS & XFC HOOK CLAMPS
Proven locking pin clamp in a new cost saving design Enhanced locking pin clamp for airless transfer pallets Easy pin location adjustment using the XYZ shim box Built in pin riser for improved weld gun
More informationM14 Rifle Item Stock Numbers
M14 Rifle Item Stock Numbers This document is derived from the 02/04/07 draft of the Third Edition of M14 Rifle History and Development by Lee Emerson copyright 2007. Permission is granted to reproduce
More informationRESIST CONFORMITY. GO ROGUE.
ROGUE RESIST CONFORMITY. GO ROGUE. IT IS IN THE SOUL OF THE ROGUE, THE WAY IT STANDS OUT, ITS DEFIANCE OF CONVENTION, ITS INDEPENDENCE THAT SEPARATES IT FROM ALL OTHERS. ROGUE. AN ULTRA RESPONSIVE RIDE.
More informationAr 15 handguard rail kit
Ar 15 handguard rail kit 02/25/2018 Sex and ovarian cyst 02/27/2018 Emuparadise pokemon ruby 02/28/2018 -Anna y123 custom vids -Concours 2017 au cameroun 03/02/2018 Jbcp radio 03/04/2018 Adding an aftermarket
More informationService Guide JATCO Environmental Protection Tank Model J-7000
Service Guide JATCO Environmental Protection Tank Model J-7000 Listed below are a series of steps to follow if the JATCO tank fails to dump properly. #1. Be sure there is an adequate supply of gas pressure
More informationCOMPONENT DIAGRAM : LMG ENHANCED
KA002-05U KA002-06U KA002-02U KA002-37U KA002-37U KA002-33U KA002-10U KA002-30U KA002-36U KA002-54U KA002-55U KA002-03U KA002-46U KA002-28U KA002-27U KA002-17U KA002-32A KA002-29A KA012-01U KA012-02U KA012-03U
More informationAimpoint Inc Pricelist North America (US$) Effective January 1, 2015
Aimpoint Inc. 2015 Pricelist North America (US$) Effective January 1, 2015 EAN CONTRACT PRICE Full Size 30mm Sights 12841 PATROL RIFLE OPTIC (PRO) 73 5000 438 339 9 $407.11 200174 AIMPOINT CARBINE OPTIC
More information2018 PRODUCT CATALOG
2018 PRODUCT CATALOG GEISSELE TRIGGERS PERFORMANCE ADVANTAGES FOR THE SHOOTER Our triggers and hammers are made from quality S7 tool steel. The sear surfaces are precisely cut by a wire EDM machine.
More informationZwick. Materials testing. Product Information Temperature chambers for AllroundLine
CTA: 126188 126175 AllroundLine Z010 with 400 mm wide temperature chamber Applications Materials and component testing over a wide temperature range, including: tests on plastics: reliable test results,
More informationSL-QC CODER PARTS LIST AND OPERATING INSTRUCTIONS
SL-QC CODER PARTS LIST AND OPERATING INSTRUCTIONS Marion, IL STK. NO. 5800-102 CONTENTS Installation 2 Operating Instructions 2-3 Maintenance 3 Problems & Corrections 4 Instructions for Mounting New Die
More informationGUIDE ROD LASER User Guide for Beretta 92 & 96 Full Size and Taurus PT 92, 99, 100, & 101
GUIDE ROD LASER User Guide for Beretta 9 & 9 Full Size and Taurus PT 9, 99, 00, & 0 IMPORTANT: LASERMAX, INC. DOES NOT WARRANTY THE ALIGNMENT OR FUNCTION OF THE GUIDE ROD LASER FOR PORTED FIREARMS, OR
More informationGA 24 Heavy-duty variable area flowmeter
KROHNE 10/99 D 11 GA24 01 E GR Heavy-duty variable area flowmeter Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
More informationROCK RIVER ARMS. All prices, configurations and specifications subject to change without notice.
JUNE 2004 ROCK RIVER ARMS Table of Contents RRA Custom 1911 Pistols, Parts & Customizing Services.............. Pages 3 / 6 RRA Custom Carbines & Rifles.................................... Pages 7 / 12
More informationMagazines & Enhancements
Magazines & Enhancements MAGPUL PMAG AR15/M16/M4 Cal. 223 / 5.56x45 60 Rounds Gen M3 170.- out of stock 40 Rounds Gen M3 No Window 34.- blk 30 Rounds Gen M3 No Window 26.- blk Window 29.- blk 20 Rounds
More informationUS Machine Gun Armory s SAW
US Machine Gun Armory s SAW By Dave Bahde 84 SADEFENSEJOURNAL.COM Compact, lighter than one might think, the MGA SAW in 6.8 SPC brings serious firepower to the engagement. In almost all modern militaries,
More informationSafeGarment User s Guide SafeGarment
SafeGarment User s Guide www.safegarment.com SafeGarment SafeGarment Basics Table of Contents SafeGarment Assembly Kit Using the SafeGarment Locking System 100 Series Free-standing Displays Series Overview
More informationInstruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings
Instruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings Installation SDAF SD & S3000 SAF Warning: To ensure that the drive is not unexpectedly started,
More informationNew tool for installing clutch driven plate and pressure plate.
1(5) New tool for installing clutch driven plate and pressure plate. Special tools: 999 5662-5, 999 5663-3 It is very important to center the clutch driven plate and pressure plate is very important when
More informationSetting Up & Operating Instructions
Setting Up & Operating Instructions KALTEC PTY LTD 54 Dunorlan Road Edwardstown SA 5039 Australia Tel. (08) 8277 6305 Fax. (08) 8277 0481 Email requests@kaltec.com.au www.kaltec.com.au Shoulder Traction
More information2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE
2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE THE FUTURE OF THE MSR HAS BEEN REDEFINED. DPMS GII HAS ARRIVED. THE LIGHTEST, MOST RELIABLE, TECHNICALLY ADVANCED.308 MSR. DESIGNED II DOMINATE. DPMS
More informationOperation Instructions
Rice Lake Mechanical Physician Scale (w/ hand post) Model RL-MPS-30 Operation Instructions 132702 Contents 1.0 Introduction... 1 2.0 Installation Instructions... 2 2.1 Pillar Installation.................................................................
More informationInstallation Instructions
FORD 20K Industry Standard Rail Custom Mounting Kit #2738 Gross Trailer Weight (Maximum)...20,000 lbs. Vertical Load Weight (Max. Pin Weight)...5,000 lbs. SYSTEM TOW CAPACITY Please note, in order to determine
More informationPh: Camlok. Lifting Clamps. Made in Britain - Safely used throughout the world.
Ph: 02 9631 8833 camlok@lbwireropes.com.au Camlok Made in Britain - Safely used throughout the world www.camlok.com.au Product Page Vertical Plate Clamps: Why a Camlok: The Advantages Explained 3 92 Series
More information2017 PRODUCT CATALOG
2017 PRODUCT CATALOG TRIGGERS PERFORMANCE ADVANTAGES FOR THE SHOOTER Our triggers and hammers are made from quality S7 tool steel. The sear surfaces are cut by a wire EDM machine which makes them very
More informationThe CBJ Technology. 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball
The CBJ Technology 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball The CBJ Technology CBJ Tech AB has developed the 6.5x25 CBJ Cartridge, which utilizes subcaliber technology (tungsten core projectile inside
More informationDEFENDER SERIES. 5 Gallon, Double Walled, Field Replaceable Spill Container Model Series INSTALLATION, OPERATION, & MAINTENANCE
DEFENDER SERIES 5 Gallon, Double Walled, Field Replaceable Spill Container Model 705-550 Series INSTALLATION, OPERATION, & MAINTENANCE Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 USA Tel:
More informationContents HELLA Workshop
HELLA Workshop HELLA offers a comprehensive range of high quality inspection lamps and testing equipment that is designed to meet the needs of discerning do-it-yourself and professional technicians. Contents
More information<< FEATURES AND BENEFITS >>
PISTOL SLIDE MANUAL TABLE OF CONTENTS FEATURES AND BENEFITS... 2 ASSEMBLY AND INSTALLATION...3-4 INSTALLING TRIJICON RMR PLATE... 5 IMPORTANT SAFETY INFORMATION... 6 LIMITED WARRANTY... 7-10
More information20K - Fifth Wheel Hitch
You can take it with you. INSTRUCTION & OPERATION MANUAL 20K - Fifth Wheel Hitch DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and unhitching procedures in
More informationR.A.G.E. TCS. Instruction & Safety Manual. Rapid Adjustable Gas Expulsion Total Compensation System
R.A.G.E. TCS Rapid Adjustable Gas Expulsion Total Compensation System Instruction & Safety Manual READ ALL INSTRUCTIONS PRIOR TO INSTALLATION AND USE OF THE R.A.G.E. TCS. WARNING: MAKE SURE YOUR FIREARM
More informationSU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355
SU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355 384 357 402 137 103 365 438 367 367 434 294 480 481 202 103 C-BARREL 137 GAS BLOCK FRONT SIGHT 202 RECEIVER RECEIVER SCREW 294 O'RING 355
More informationO W N E R S M A N U A L
OWNER S MANUAL THANK YOU Congratulations on your recent purchase! We at RedHead by BOWTECH know that you have a choice when it comes to your archery equipment, and we want to thank you for choosing us
More informationPM Crew Served Weapons LTC Paul E. Alessio
Our Strength and Purpose PM Crew Served Weapons LTC Paul E. Alessio 26 April 2016 Product Manager Crew Served Weapons M24 Mini Binocular M2010 Enhanced Sniper Rifle (ESR) M107 Long Range Sniper Rifle M22
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationTorque Cell Installation Guide for Model 250i/250iP DynoWare RT Dynamometers.
2015 Dynojet Research, Inc. All Rights Reserved. Torque Cell Installation Guide for Model 250i/250iP DynoWare RT Dynamometers. This manual is copyrighted by Dynojet Research, Inc., hereafter referred to
More informationand SECOND STAGE REGULATOR TAL 502 (L) Rev. 0 MSA 2005 Prnt. Spec (I) Mat Doc
and SECOND STAGE REGULATOR TAL 502 (L) Rev. 0 MSA 2005 Prnt. Spec. 10000005389 (I) Mat. 10064393 Doc. 10064393 Firehawk Second Stage Regulator Assembly Second Stage w/hose Ass'y Push-To-Connect 10033170
More informationTorque Module Installation and User Guide for model 250i Motorcycle Dynamometers.
2000-2005 Dynojet Research, Inc. All Rights Reserved. Torque Module Installation and User Guide for model 250i Motorcycle Dynamometers. This manual is copyrighted by Dynojet Research, Inc., hereafter referred
More informationprice list Effective 1/1/11. Subject to change without notice.
dakota price list Effective 1/1/11. Subject to change without notice. Model 76 & Traveler Standard Features Choose Your Caliber/Action Length Shown in Safari model with custom options o Overall Length
More informationQuick-change systems Content
Quick-change systems Content Quick-change systems at a glance... 12 Series S... 13 Series SR... 18 Series ASR... 39 Quick-change systems At a glance Quick-change systems > Safe and stable connection of
More informationEquipment Information
2045D Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air Ltd. Clifton House, 1 Marston Road St. Neots GB-Cambridgeshire PE19 2HN United Kingdom
More informationMagazines & Enhancements
Magazines & Enhancements MAGPUL PMAG AR15/M16/M4 Cal. 223 / 5.56x45 M3 compatible with HK MR223 40 Rounds Gen M3 No Window 34.- blk 30 Rounds Gen M3 No Window 26.- blk Window 29.- blk 20 Rounds Gen M3
More informationDODGE CUMMINS COOLANT BYPASS KIT
SUBJECT: DODGE CUMMINS COOLANT BYPASS KIT FPE-2018-06 Page 1 of 6 FITMENT: 2003 2007 Dodge Cummins Manual Transmission Only 2007.5-2015 Dodge Cummins Manual and Automatic Transmissions KIT P/N: FPE-CLNTBYPS-CUMMINS-MAN
More informationInstallation Instructions Models 2858, 2858A-1, 2858GL February 2009
Installation Instructions Models 2858, 2858A-1, 2858GL February 2009 www.donovan-ent.com Donovan Enterprises 3353 SE Gran Park Way Stuart, FL 34997 800-327-8287 Step 1 Head Assembly Installation Instructions
More informationIV Camera Dolly USER GUIDE Operational Instructions & Specifications
HybridTM IV Camera Dolly USER GUIDE Operational Instructions & Specifications Hybrid TM IV 203 Chapman/Leonard Studio Equipment, Inc. Customer Service at 888-883-6559 or 88-764-6726. Chapman / Leonard
More informationLIF TING SOLUTIONS. Lifting Solutions
Center Pull Style... 484-485 Envirolox Protective Finish... 494 Eye Bolts...500 Eye Nuts... 499 Forged Center Pull...487 488 Forged Center Pull Stainless Steel...486 Kwik-Lok Lifting Pin...495 496 Hold
More informationMicro-Trains #1021/#1022 Low short profile coupler
1 Micro-Trains #1021/#1022 Low short profile coupler Low short profile coupler, for locomotives and cars with limited mounting area, makes 2 pair of either (1021) Life-Like E8A Pilot or Bachmann 4-8-4
More informationMade from chrome-molybdenum
JTC-1605 DELUXE CROWS-FOOT WRENCH SET Made from chrome-molybdenum steel with a gap for use on union nuts fitted in hydraulic oil, diesel injection, and compressed air systems. Spec: 10-pcs o 3/8" DR. x
More information39 Jerusalem st. Ono mall, Kiryat Ono Israel Phone: , Fax:
39 Jerusalem st. Ono mall, Kiryat Ono 55423 Israel Phone: +972-3-6326666, Fax: +972-3-6326099 www.gilboa-rifle.com The Gilboa, a new series of military-grade firearms made in Israel, is produced using
More informationMilitary & Law enforcement. professionally made in Finland
Military & Law enforcement Sound suppressors professionally made in Finland Effective accurate Compact Durable The suppressors excellent features and high quality are based on innovative suppressor design,
More informationAG903-07E TDFN Current Sensor Evaluation Board
AG903-07E TDFN Current Sensor Evaluation Board 1A Max TDFN Current Sensor Evaluation Board www.nve.com 800-GMR-7141 Under PCB Through Leadframe Under Sensor 5 Turns AG903-06 SB-00-069B NVE Corporation
More information