(click on page links below) XAL-2C Technical Data 1. XAL-4C Technical Data 3

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "(click on page links below) XAL-2C Technical Data 1. XAL-4C Technical Data 3"

Transcription

1 XAL Series Horizontal Outside Louvre Contents: (click on page links below) XAL-2C Technical Data 1 XAL-4C Technical Data XAL-2F Technical Data XAL-4F Technical Data 7 AUCKLAND ph fax WELLINGTON ph fax CHRISTCHURCH ph fax HEAD OFFICE (Auckland) 8 Tidal Road, Mangere, Auckland 2022, NZ Private Bag 90, Otahuhu, Auckland 1640, NZ

2 1 XAL-2C Fixed Outside Louvre Channel Frame, Horizontal Blades Data Sheet DIMENSIONS (mm) 2 HEAD CHANNEL FRAME OVERALL SIZE = NOMINAL HEIGHT - 6 CTRS 4 NOMINAL HEIGHT (HOLE SIZE) SILL HOLE SHOWN DOTTED OVERALL SIZE = NOMINAL WIDTH - 6 NOMINAL WIDTH (HOLE SIZE) 0 FRONT ELEVATION TYPICAL VERTICAL SECTION BIRD/VERMIN MESH BUTT JOINTING FOR TYPICAL HORIZONTAL SECTION OPTIONAL FLASHING FOR JOINED ON SITE STANDARD CONSTRUCTION BLADES/FRAME: MESH - Optional: FINISH - Standard: MINIMUM SIZE: MAXIMUM SECTION SIZE: SIZE AVAILABILITY: SELECTION DATA: 606-T extruded aluminium Expanded aluminium Mill or powder coat (standard colours) 00 mm width x 10 mm height 2000 mm width x 2000 mm height Width to order; 00 mm and over Height in 0 mm increments Refer overleaf Note The manufacturer reserves the right to make changes in specifications at any time without notice or obligation. Certified dimensions available on request.

3 XAL-2C Fixed Outdoor Louvre 2 SELECTION Data Effective Area (m 2 ) Nominal Width (m) Nominal HEIGHT (m) Pressure vs. Velocity Characteristics Intake Pressure (pascals) Velocity(m/s) over Effective Area Exhaust Pressure (pascals) SELECTION PROCEDURE - Example Aim: To identify an outdoor louvre for an intake duty of 0.40 m /s at a pressure requirement of 8 Pa. 1. From Pressure vs. Velocity Table, velocity for 8 Pa intake pressure = 4. m/s. 2. Effective Area = m /s = 0.4 = 0.09 m 2 Velocity 4.. From Effective Area Table (see shading), suitable nominal sizes are: 0.8 m width x 0. m height 0.4 m width x 0. m height 0. m width x 0.7 m height Available from 01/97 Pamphlet No temperzone limited 2007 temperzone limited Head Office : 8 Tidal Rd, Mangere South, Manukau 2022 Private Bag 90, Otahuhu, Manukau 1640 Emai:l Website: AUCKLAND: Ph , WELLINGTON: Ph , CHRISTCHURCH: Ph , AS/NZS ISO 9001: 2000 Manx Press

4 XAL-4C Fixed Outside Louvre Channel Frame, Horizontal Blades Data Sheet DIMENSIONS (mm) 2 HEAD CHANNEL FRAME OVERALL SIZE = NOMINAL HEIGHT CTRS 4 NOMINAL HEIGHT (HOLE SIZE) SILL HOLE SHOWN DOTTED OVERALL SIZE = NOMINAL WIDTH - 6 NOMINAL WIDTH (HOLE SIZE) FRONT ELEVATION 100 TYPICAL VERTICAL SECTION BIRD/VERMIN MESH 0 BUTT JOINT FOR TYPICAL HORIZONTAL SECTION OPTIONAL FLASHING FOR, JOINED ON SITE STANDARD CONSTRUCTION FRAME: BLADES: MESH - Optional: FINISH - Standard: MINIMUM SIZE: MAXIMUM SECTION SIZE: SIZE AVAILABILITY: SELECTION DATA: Sheet aluminium 606-T extruded aluminium Expanded aluminium Mill or powder coat (standard colours) 00 mm width x 00 mm height 2000 mm width x 2000 mm height Width to order; 00 mm and over Height in 100 mm increments Refer overleaf Note The manufacturer reserves the right to make changes in specifications at any time without notice or obligation. Certified dimensions available on request.

5 XAL-4C Fixed Outdoor Louvre 4 SELECTION Data Effective Area (m 2 ) Nominal Width (m) Nominal HEIGHT (m) Pressure vs. Velocity Characteristics Intake Pressure (pascals) Velocity(m/s) over Effective Area Exhaust Pressure (pascals) SELECTION PROCEDURE - Example Aim: To identify an outdoor louvre for an intake duty of 0.40 m /s at a pressure requirement of 8 Pa. 1. From Pressure vs. Velocity Table, velocity for 8 Pa intake pressure = 4. m/s. 2. Effective Area = m /s = 0.4 = 0.09 m 2 Velocity 4.. From Effective Area Table (see shading), suitable nominal sizes are: 1.0 m width x 0.4 m height 0.7 m width x 0. m height 0. m width x 0.9 m height Available from 01/07 Pamphlet No. 269 temperzone limited Head Office : 8 Tidal Rd, Mangere South, Manukau 2022 Private Bag 90, Otahuhu, Manukau 1640 Emai:l Website: AUCKLAND: Ph , WELLINGTON: Ph , CHRISTCHURCH: Ph , AS/NZS ISO 9001: 2000 temperzone limited 2007 Manx Press

6 XAL-2F Fixed Outside Louvre Flange Frame, Horizontal Blades Data Sheet DIMENSIONS (mm) 2 HEAD FLANGED FRAME OVERALL SIZE = NOMINAL HEIGHT + 0 CTRS 4 NOMINAL HEIGHT - 10 NOMINAL HEIGHT (HOLE SIZE) SILL HOLE SHOWN DOTTED NOMINAL WIDTH (HOLE SIZE) OVERALL SIZE = NOMINAL WIDTH FRONT ELEVATION TYPICAL VERTICAL SECTION 60 GAP BUTT JOINTING FOR BIRD/VERMIN MESH TYPICAL HORIZONTAL SECTION STANDARD CONSTRUCTION BLADES/FRAME: MESH - Optional: FINISH - Standard: MINIMUM SIZE: MAXIMUM SECTION SIZE: SIZE AVAILABILITY: SELECTION DATA: 606-T extruded aluminium Expanded aluminium Mill or powder coat (standard colours) 200 mm width x 200 mm height 2000 mm width x 2000 mm height Width to order; 200 mm and over Height in 0 mm increments Refer overleaf Note The manufacturer reserves the right to make changes in specifications at any time without notice or obligation. Certified dimensions available on request.

7 XAL-2F Fixed Outdoor Louvre 6 SELECTION Data Effective Area (m 2 ) Nominal Width (m) Nominal HEIGHT (m) Pressure vs. Velocity Characteristics Intake Pressure (pascals) Velocity(m/s) over Effective Area Exhaust Pressure (pascals) SELECTION PROCEDURE - Example Aim: To identify an outdoor louvre for an intake duty of 0.40 m /s at a pressure requirement of 8 Pa. 1. From Pressure vs. Velocity Table, velocity for 8 Pa intake pressure = 4. m/s. 2. Effective Area = m /s = 0.4 = 0.09 m 2 Velocity 4.. From Effective Area Table (see shading), suitable nominal sizes are: 0.8 m width x 0. m height 0.4 m width x 0. m height 0. m width x 0.7 m height ISO 9002 CERTIFIED Available from: AUCKLAND WELLINGTON CHRISTCHURCH /0 Pamphlet No. 226 temperzone limited 200 Manx Press

8 7 XAL-4F Fixed Outside Louvre Flange Frame, Horizontal Blades Data Sheet DIMENSIONS (mm) 60 HEAD FLANGED FRAME HOLE SHOWN DOTTED OVERALL SIZE = NOMINAL HEIGHT CTRS 4 SILL NOMINAL HEIGHT - 10 NOMINAL HEIGHT (HOLE SIZE) NOMINAL WIDTH (HOLE SIZE) 8 OVERALL SIZE = NOMINAL WIDTH FRONT ELEVATION TYPICAL VERTICAL SECTION BIRD/VERMIN MESH 80 GAP BUTT JOINTING FOR TYPICAL HORIZONTAL SECTION STANDARD CONSTRUCTION BLADES/FRAME: MESH - Optional: FINISH - Standard: MINIMUM SIZE: MAXIMUM SECTION SIZE: SIZE AVAILABILITY: SELECTION DATA: 606-T extruded aluminium Expanded aluminium Mill or powder coat (standard colours) 00 mm width x 00 mm height 2000 mm width x 2000 mm height Width to order; 00 mm and over Height in 100 mm increments Refer overleaf Note The manufacturer reserves the right to make changes in specifications at any time without notice or obligation. Certified dimensions available on request.

9 XAL-4F Fixed Outdoor Louvre 8 SELECTION Data Effective Area (m 2 ) Nominal Width (m) Nominal HEIGHT (m) Pressure vs. Velocity Characteristics Intake Pressure (pascals) Velocity(m/s) over Effective Area Exhaust Pressure (pascals) SELECTION PROCEDURE - Example Aim: To identify an outdoor louvre for an intake duty of 0.40 m /s at a pressure requirement of 8 Pa. 1. From Pressure vs. Velocity Table, velocity for 8 Pa intake pressure = 4. m/s. 2. Effective Area = m /s = 0.4 = 0.09 m 2 Velocity 4.. From Effective Area Table (see shading), suitable nominal sizes are: 1.0 m width x 0.4 m height 0.7 m width x 0. m height 0. m width x 0.9 m height ISO 9002 CERTIFIED Available from: AUCKLAND WELLINGTON CHRISTCHURCH /0 Pamphlet No. 229 temperzone limited 200 Manx Press