Stationary piston compressors RECOM

Transcription

1 Catalog #1

2 Index 1. Piston Compressors Recom RCW. 3 Piston Compressors RECOM RCW with to 0,42 m³/min 4 Piston Compressors RECOM RCW with to 0,50 m³/min 5 Piston Compressors RECOM RCW with to 0,70 m³/min 6 Piston Compressors RECOM RCW with to 0,90 m³/min 7 Piston Compressors RECOM RCW with to 1,30 m³/min 8 2. Piston Compressors RECOM RCI. 9 Piston Compressors RECOM RCI with to 0,51 m³/min 10 Piston Compressors RECOM RCI with to 0,68 m³/min 11 Piston Compressors RECOM RCI with to 1,00 m³/min 12 Piston Compressors RECOM RCI with to 1,47 m³/min 13 Piston Compressors RecomIndustria with vertical receiver Lubricant for Piston Compressors 15 Lubricant for Piston Compressors RecLub 15 This Catalogue is valid from May All previous catalogues lose their validity with the publication of the new catalogue. Technical characteristics, specifications and details published in this catalogue are subject to change without notice. Comprag GmbH. The latest catalogue version is available for download on our web page Copyright 2015 Comprag GmbH. All rights reserved.

3 Part RECOM RCW - series Best choice for workshops and small industry

4 Piston Compressors Recom RCW with to 0,42 m³/min. Ideal for workshops and light industrial applications. RECOM RCW series compressors comprise a one-to-two-stage castiron unit with low speed and low operating temperature. All RECOM RCW compressors are fitted with an industrial three-phase electric motor and an electromechanical control relay. Pictured: RCW Single-stage heavy cast-iron compressor unit Low speed Low operating temperature Installed non-return and relief valve Equipped with 2-outlet filter regulator Two options for arrangement of receiver RCW ,0 10 0, /380/ / RCW ,0 10 0, /380/ /2 4 Height (mm) Width (mm) Depth (mm) Weight (kg) RCW RCW * Measured according to ISO 1217 ** Measured according to ISO 3744

5 Piston Compressors Recom RCW with to 0,50 m³/min. Ideal for workshops and light industrial applications. RECOM RCW series compressors comprise a one-to-two-stage castiron unit with low speed and low operating temperature. All RECOM RCW compressors are fitted with an industrial three-phase electric motor and an electromechanical control relay. Pictured: RCW Single-stage heavy cast-iron compressor unit Low speed Low operating temperature Installed non-return and relief valve Equipped with 2-outlet filter regulator Two options for arrangement of receiver RCW ,0 10 0, /380/ / RCW ,0 10 0, /380/ /2 Height (mm) Width (mm) Depth (mm) Weight (kg) RCW RCW * Measured according to ISO 1217 ** Measured according to ISO

6 Piston Compressors Recom RCW with to 0,70 m³/min. Ideal for workshops and light industrial applications. RECOM RCW series compressors comprise a one-to-two-stage castiron unit with low speed and low operating temperature. All RECOM RCW compressors are fitted with an industrial three-phase electric motor and an electromechanical control relay. Pictured: RCW-5,5-500 Single-stage heavy cast-iron compressor unit Low speed Low operating temperature Installed non-return and relief valve Equipped with 2-outlet filter regulator Two options for arrangement of receiver RCW-5, ,5 10 0, /380/ / RCW-5, ,5 10 0, /380/ / RCW-5, ,5 10 0, /380/ /2 Height (mm) Width (mm) Depth (mm) Weight (kg) RCW-5, RCW-5, RCW-5, * Measured according to ISO 1217 ** Measured according to ISO

7 Piston Compressors Recom RCW with to 0,90 m³/min. Ideal for workshops and light industrial applications. RECOM RCW series compressors comprise a one-to-two-stage castiron unit with low speed and low operating temperature. All RECOM RCW compressors are fitted with an industrial three-phase electric motor and an electromechanical control relay. Pictured: RCW-7,5-500 Single-stage heavy cast-iron compressor unit Low speed Low operating temperature Installed non-return and relief valve Equipped with 2-outlet filter regulator Two options for arrangement of receiver RCW-7, ,5 10 0, /380/ / RCW-7, ,5 10 0, /380/ /2 Height (mm) Width (mm) Depth (mm) Weight (kg) RCW-7, RCW-7, * Measured according to ISO 1217 ** Measured according to ISO

8 Piston Compressors Recom RCW with to 1,30 m³/min. Ideal for workshops and light industrial applications. RECOM RCW series compressors comprise a one-to-two-stage castiron unit with low speed and low operating temperature. All RECOM RCW compressors are fitted with an industrial three-phase electric motor and an electromechanical control relay. Pictured: RCW Single-stage heavy cast-iron compressor unit Low speed Low operating temperature Installed non-return and relief valve Equipped with 2-outlet filter regulator Two options for arrangement of receiver RCW ,0 10 1, /380/ / RCW ,0 10 1, /380/ /2 8 Height (mm) Width (mm) Depth (mm) Weight (kg) RCW RCW * Measured according to ISO 1217 ** Measured according to ISO 3744

9 Part #2 RECOM RCI -series World-class industrial compressors

10 Piston Compressors Recom RCI with to 0,51 m³/min. For general industrial application. RECOM RCI compressors comprise a solid cast-iron two-stage unit with low speed and low operating temperature. All RECOM RCI compressors are fitted with an industrial three-phase electric motor and an electromechanical control relay. The RCI series compressors feature a centrifugal discharge device, which relieves in the cylinder during buildup, thereby preventing overload of the motor during start-up and enabling the compressor to achieve high performance. Pictured: RCI Two-stage heavy cast-iron compressor unit Double-sided coolers for compressor unit to reduce operating temperature Reed valves produced from special stainless steel Centrifugal discharge device Industrial grade bearings with increased diameter Cast-iron non-return valve and relief valve RCI ,0 12 0, /380/ / RCI ,0 12 0, /380/ /2 10 Height (mm) Width (mm) Depth (mm) Weight (kg) RCI RCI * Measured according to ISO 1217 ** Measured according to ISO 3744

11 Piston Compressors Recom RCI with to 0,68 m³/min. For general industrial application. RECOM RCI compressors comprise a solid cast-iron two-stage unit with low speed and low operating temperature. All RECOM RCI compressors are fitted with an industrial threephase electric motor and an electromechanical control relay. The RCI series compressors feature a centrifugal discharge device, which relieves in the cylinder during build-up, thereby preventing overload of the motor during start-up and enabling the compressor to achieve high performance. Pictured: RCI-5,5-500 Two-stage heavy cast-iron compressor unit Double-sided coolers for compressor unit to reduce operating temperature Reed valves produced from special stainless steel Centrifugal discharge device Industrial grade bearings with increased diameter Cast-iron non-return valve and relief valve RCI-5, ,5 12 0, /380/ / RCI-5, ,5 12 0, /380/ /2 Height (mm) Width (mm) Depth (mm) Weight (kg) RCI-5, RCI-5, * Measured according to ISO 1217 ** Measured according to ISO

12 Piston Compressors Recom RCI with to 1,00 m³/min. For general industrial application. RECOM RCI compressors comprise a solid cast-iron two-stage unit with low speed and low operating temperature. All RECOM RCI compressors are fitted with an industrial threephase electric motor and an electromechanical control relay. The RCI series compressors feature a centrifugal discharge device, which relieves in the cylinder during build-up, thereby preventing overload of the motor during start-up and enabling the compressor to achieve high performance. Pictured: RCI-7,5-500 Two-stage heavy cast-iron compressor unit Double-sided coolers for compressor unit to reduce operating temperature Reed valves produced from special stainless steel Centrifugal discharge device Industrial grade bearings with increased diameter Cast-iron non-return valve and relief valve RCI-7, ,5 12 1, /380/ / RCI-7, ,5 12 1, /380/ /2 12 Height (mm) Width (mm) Depth (mm) Weight (kg) RCI-7, RCI-7, * Measured according to ISO 1217 ** Measured according to ISO 3744

13 Piston Compressors Recom RCI with to 1,47 m³/min. For general industrial application. RECOM RCI compressors comprise a solid cast-iron two-stage unit with low speed and low operating temperature. All RECOM RCI compressors are fitted with an industrial threephase electric motor and an electromechanical control relay. The RCI series compressors feature a centrifugal discharge device, which relieves in the cylinder during build-up, thereby preventing overload of the motor during start-up and enabling the compressor to achieve high performance. Pictured: RCI Two-stage heavy cast-iron compressor unit Double-sided coolers for compressor unit to reduce operating temperature Reed valves produced from special stainless steel Centrifugal discharge device Industrial grade bearings with increased diameter Cast-iron non-return valve and relief valve RCI ,0 12 1, /380/ / RCI ,0 12 1, /380/ /2 Height (mm) Width (mm) Depth (mm) Weight (kg) RCI RCI * Measured according to ISO 1217 ** Measured according to ISO

14 Piston Compressors RecomIndustria with vertical receiver. For general industrial application. RECOM RCI compressors comprise a solid cast-iron two-stage unit with low speed and low operating temperature. All RECOM RCI compressors are fitted with an industrial three-phase electric motor and an electromechanical control relay. The RCI series compressors feature a centrifugal discharge device, which relieves in the cylinder during build-up, thereby preventing overload of the motor during startup and enabling the compressor to achieve high performance. Pictured: RCI-7,5-500V Two-stage heavy cast-iron compressor unit Double-sided coolers for compressor unit to reduce operating temperature Reed valves produced from special stainless steel Centrifugal discharge device Industrial grade bearings with increased diameter Cast-iron non-return valve and relief valve RCI-4-500V 4,0 12 0, /380/ / RCI-5,5-500V 5,5 12 0, /380/ / RCI-7,5-500V 7,5 12 1, /380/ /2 Height (mm) Width (mm) Depth (mm) Weight (kg) RCI-4-500V RCI-5,5-500V RCI-7,5-500V * Measured according to ISO 1217 ** Measured according to ISO

15 Part #3 Lubricant for Piston Compressors RecLub Lubricant for Piston Compressors RecLub Comprag oil protects compressors and pneumatic tools from wear and tear and prevents condensate separating and oil foaming. Comprag RecLub universal mineral oil for piston compressors. Technical characteristics: Superb lubrication at low temperatures Reliable protection from wear and tear Excellent corrosion protection of body Little foaming Complies with standards DIN VDL, ISO 6743/3A. ISO viscosity class VG 100 Volume (l) COMPRAG RecLub COMPRAG RecLub COMPRAG RecLub COMPRAG RecLub 10 15

16 Local distributor Comprag GmbH Wilhelm- Muthmann- Strasse Wuppertal, Germany Tel.: +49- (0) Fax: +49- (0) Web: