RX 70 Technical Data. Diesel and LPG forklift trucks. RX RX RX RX RX Hybrid RX Hybrid

Transcription

1 @ RX 70 Technical Data Diesel and LPG forklift trucks RX RX RX RX RX Hybrid RX Hybrid

2 2 RX 70 TECHNICAL DATA 3 This specification sheet to VDI Guideline 2198 only gives the technical figures for the standard truck. Different tyres, other masts, additional equipment etc. could give different figures. Characteristics Weights Wheels chassis Basic dimensions Performance Engine Miscellaneous 1.1 Manufacturer STILL STILL STILL STILL STILL STILL STILL STILL STILL STILL STILL STILL 1.2 Manufacturer s model designation RX RX TDI-PD RX 70-22T RX RX TDI-PD RX 70-25T RX RX Hybrid RX 70-30T RX RX Hybrid RX 70-35T Manufacture s type designation Truck type Diesel Diesel LP gas Diesel Diesel LP gas Diesel Diesel/Hybrid LP gas Diesel Diesel/Hybrid LP gas 1.4 Operation Rider seated Rider seated Rider seated Rider seated Rider seated Rider seated Rider seated Rider seated Rider seated Rider seated Rider seated Rider seated 1.5 Rated capacity Q kg Load centre c mm Load distance x mm Wheel base y mm Truck weight kg Axle load, laden, front kg Axle load, laden, rear kg Axle load, unladen, front kg Axle load, unladen, rear kg Tyres SE SE SE SE SE SE SE SE SE SE SE SE 3.2 Tyre size, front 23 x x x x x x x x x x x x Tyre size, rear 21 x x x x x x x x x x x x Number of wheels front (x = driven) 2x 2x 2x 2x 2x 2x 2x 2x 2x 2x 2x 2x Number of wheels rear (x = driven) Track width, front b10 mm Track width, rear b11 mm Tilt Mast/Fork carriage, forward Tilt Mast/Fork carriage, back Height, mast lowered h1 mm Free lift h2 mm Lift h3 mm Height, mast raised h4 mm Height over overhead guard (cab) h6 mm Seat height/stand height rel. to SIP h7 mm Coupling height h10 mm Overall length l1 mm Length including fork backs l2 mm Overall width b1 mm Fork thickness s mm Fork width e mm Fork length l mm Fork carriage ISO 2328, Class/Form A, B Kl. II/Form A Kl. II/Form A Kl. II/Form A Kl. II/Form A Kl. II/Form A Kl. II/Form A Kl. III/Form A Kl. III/Form A Kl. III/Form A Kl. III/Form A Kl. III/Form A Kl. III/Form A 4.24 Fork carriage width b3 mm Floor clearance under mast, laden m1 mm Floor clearance, centre of wheel-base m2 mm Working aisle x 1200 pallet crosswise Ast mm Working aisle x 1200 pallet lengthways Ast mm Turning radius Wa mm Smallest pivot point distance b13 mm Travel speed laden km/h Travel speed unladen km/h Hoist speed laden m/s 0,51 0,58 0,53 0,51 0,58 0,53 0,48 0,47 0,48 0,48 0,45 0, Hoist speed unladen m/s 0,53 0,59 0,55 0,53 0,59 0,55 0,51 0,53 0,50 0,51 0,53 0, Lowering speed laden m/s 0,60 0,60 0,60 0,60 0,60 0,60 0,60 0,60 0,60 0,60 0,60 0, Lowering speed unladen m/s 0,53 0,53 0,53 0,53 0,53 0,53 0,53 0,53 0,53 0,53 0,53 0, Drawbar pull laden N Drawbar pull unladen N Max. gradeability laden % Max. gradeability unladen % Acceleration time laden s 5,2 4,7 5,2 5,2 4,9 5,2 5,3 5,5 5,2 5,4 5,6 5, Acceleration time unladen s 4,6 4,3 4,6 4,6 4,3 4,6 4,5 4,6 4,6 4,7 4,8 4, Service brake electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. electr./hydr. 7.1 Engine manufacturer VW VW VW VW VW VW VW VW VW VW VW VW Type BXT CBHA BEF BXT CBHA BEF CBHA BXT BEF CBHA BXT BEF 7.2 Engine rating to ISO 1585 kw Additional power of electrical energy storage kw Nenndrehzahl 1/min No. of cylinders Swept volume cm³ Fuel consumption to VDI Cycle (60 runs/h) l/h 2,4 2,9 2,5 3,1 3,3 2,9 3,5 3,1 kg/h 2,5 2,6 2,9 3,1 7.9 On-board voltage V Drive control Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric Diesel-electric 10.1 Working pressure for attachments bar Oil volume for attachments l/min Volume fuel tank l/kg Sound pressure level LPAZ 1 (driver s seat) db (A) <77 <77 <77 <77 <77 <77 <77 <76 <77 <77 <76 < Sound power level LWAZ (work cycle) db (A) <100 <99 <97 <100 <99 <97 <100 <100 <97 <100 <100 <97 Body vibrations in accordance with EN m/s 2 0,58 0,58 0,58 0,58 0,58 0,58 0,58 0,58 0,58 0,58 0,58 0, Towing coupler, Type/Model DIN Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin 1 With reduced rated capacity and/or limited lift height.

3 4 RX 70 TECHNICAL DATA Seat adjustable ± 90 Forks adjustable Front track Rear track Dimensions relate to a vertical mast. RX 70-22/25 RX RX RX RX Tele mast HiLo mast Triplex mast Rated lift h3 mm Overall height h1 mm Free lift Form A h2 mm Free lift Form B h2 mm Greatest height Form A h4 mm Greatest height Form B h4 mm Forward tilt a 6 6 Back tilt b 10 (with front screen 8) 8 Load distance x mm Tyres v/h 23 x 9-10 // 21 x x 9-10 // 21 x 8-9 Greatest width (dual tyres) B mm 1180 (dual 1722) 1180 (dual 1722) 1280 (dual 1722) Overall length L2 mm Working aisle width Ast mm (1000 x 1200) 3912 // (1200 x 800) 4112 (1000 x 1200) 3937 // (1200 x 800) 4137 Track v/h mm 984/920 (dual = 1220/920) 984//920 (dual = 1220/920) 1048//920 (dual = 1220/920) Overall length L2 mm Working aisle width Ast mm (1000 x 1200) 3942 // (1200 x 800) 4142 (1000 x 1200) 3967 // (1200 x 800) 4167 Track v/h mm 984/920 (dual = 1220/920) 984//920 (dual = 1220/920) 1048//920 (dual = 1220/920) Tele mast HiLo mast Triplex mast Rated lift h3 mm Overall height h1 mm Free lift Form A h2 mm Free lift Form B h2 mm Greatest height Form A h4 mm Greatest height Form B h4 mm Forward tilt a 6 6 Back tilt b 10 (with front screen 8) 8 Load distance x mm Tyres v/h 23 x 9-10 (23 x 10-12) // 21 x x // 21 x 8-9 Greatest width (dual tyres) B mm 1180 (1194) (dual 1722) 1280 (dual 1722) Overall length L2 mm Working aisle width Ast mm (1000 x 1200) 4037 // (1200 x 800) 4237 (1000 x 1200) 4062 // (1200 x 800) 4262 Track v/h mm 984(1048)/920 (dual = 1220/920) 1048/920 (dual = 1220/920) Tele mast HiLo mast Triplex mast Rated lift h3 mm Overall height h1 mm Free lift Form A h2 mm Free lift Form B h2 mm Greatest height Form A h4 mm Greatest height Form B h4 mm Forward tilt a 6 6 Back tilt b 10 (with front screen 8) 8 Load distance x mm Tyres v/h 23 x // 21 x x // 21 x 8-9 Greatest width (dual tyres) B mm 1194 (dual 1722) 1280 (dual 1722) Overall length L2 mm Working aisle width Ast mm (1000 x 1200) 4127 // (1200 x 800) 4327 (1000 x 1200) 4152 // (1200 x 800) 4352 Track v/h mm 1048/920 (dual = 1220/920) 1048/920 (dual = 1220/920)

4 5 Basic Capacities RX Tele/Full free lift HiLo mast Basic Capacities RX Triplex mast Basic Capacity in kg 1500 Basic Capacity in kg up to up to Lift height in mm Lift height in mm Basic Capacities RX Tele/Full free lift HiLo mast Basic Capacities RX Triplex mast Basic Capacity in kg 1500 Basic Capacity in kg up to Lift height in mm 1000 up to Lift height in mm Basic Capacities RX Tele/Full free lift HiLo mast Basic Capacities RX (7323 and 7327) Triplex mast Basic Capacity in kg 1500 Basic Capacity in kg up to up to Lift height in mm Lift height in mm Basic Capacities RX Tele/Full free lift HiLo mast Basic Capacities RX Triplex mast Basic Capacity in kg Basic Capacity in kg up to up to Lift height in mm Lift height in mm

5 6 RX 70 TECHNICAL DATA Overall concept: Engine powered four wheeled counterbalance forklift truck with front wheel drive. The overall height of the truck supplied as standard is suitable for standard 8'6" containers. Drive. - Engine-electric drive with hybrid technology. - Modern diesel and gas engines with 3-phase generator. - Gas truck with regulated 3-way Cat*. - Drive axle with enclosed 3-phase drive motor. - Wear-free multi-disc brake running in oil bath. - Hydraulic engine fan. Hybrid trucks* - Diesel-electric drive with recuperation of brake energy and storage of the energy in an electric energy storage system (Ultracaps) - Use of the stored energy to accelerate the truck Ergonomics. - Generously laid out driver s workplace. - High driver comfort and operating convenience due to optimal arrangement of all controls. - Excellent visibility to all sides. Safety. - Low truck centre of gravity and an articulating steer axle for the best stability. - High residual capacities even at high lifts. - Excellent driving stability around bends - no electronic aids required. Technical features: Driver s workplace. - Low, easy entry step. - Long hand grip on overhead guard for different gripping heights. - Large footwell with vibration inhibiting floor covering plus automotive arrangement of the pedals. - Hydraulic servo steering with small steering wheel, ergonomic offcentre position, offset to the left. - Narrow steering column without cumbersome display instruments. - Central display of the drive direction plus change of drive direction in the field of view. - Large display and operating unit to the right of the driver s workplace. Energy saving feature Blue-Q. - Activation of the Blue-Q efficiency mode by pressing a button on the dashboard - Energy saving by intelligent optimisation of the drive characteristics without impairing the work under progress - Intelligent switch-off of electric equipment - Possible energy saving depending on the application profile and truck equipment up to 10 % Selectable drive parameters. - Acceleration and braking of the truck can be carried out with just the drive pedal. - Five drive stages adjustable by the driver. - Individual setting of speed, acceleration and braking within each drive stage. - Intelligent drive characteristics with engine speed reduction when the truck has finished accelerating. Environment. - Very low fuel consumption in all types of work cycles - Low emissions meeting directive 97/68/EG level 3a Hybrid trucks* - Eco-friendly and resource-saving hybrid drive - Reduction of the conceptually low fuel consumption by another 20 % per hour of operation - Reduction of CO2 emissions - Reduction of noise emission by reducing the engine speed when lifting and driving Service. - Long maintenance interval operating hours. - Quick fault identification in the event of damage due to computerised diagnostics. - Optimal accessibility for maintenance. Electrical system. - Designed in modern CAN bus technology Volt electrics. - High-speed bus for drive unit regulation. - Dedicated CAN bus for lighting and peripherals. - Cable sets sheathed in corrugated tubing with water tight plug connectors. Mast and hydraulics. - On demand delivery from hydraulic variable displacement pump for the working and steering hydraulics. - Separation of hoist hydraulics and drive, so no inching required. - Wide construction, open telescopic mast with and without full free lift and as a Triplex variant. - Clear view fork carriage with open frame profile. *Standard or optional equipment

6 7 Additional equipment features (Optional): Truck equipment. - Superelastic or pneumatic tyres, single or dual versions. Engine. - Gas truck with alternatives of gas bottle or tank. - Regenerative soot particle filter in the counterweight or as a replaceable filter system. - Wide core radiator and additional air filter for use in environments containing dust or fibres. Cab equipment. - Modular construction cab with front, rear and roof screen. - Rear mounted damped doors with large opening angles and windows sliding in opposite directions. - Parallel screen wiper with large wiped area for front and rear screen, with screen washer as standard. - Rear screen heater as standard. - Unbreakable exterior and interior mirrors. - Comfort seat variants with cloth cover, air sprung, seat heater, lumbar support, extended backrest. - Radio/CD player housed in the interior lining of the overhead guard. Electrical equipment and drive control. - Tempomat. - Automotive style lighting also approved for use on public highways. - Working spotlights front and/or rear on the overhead guard. - Components of the Materialflow Management System (MMS). - FleetManager Driver identification and control, analysis of truck operating data and accident recorder. - Camera systems for mast and reversing. Mast and hydraulics. - Auxiliary hydraulics for actuating functions on attachments. - Various fork carriage widths and fork lengths. - Attachments to suit each load. - Hydraulic accumulator to damp shocks in the hydraulic system. Controls. - Drive actuated by two pedal controls. - Actuation of the hydraulic functions by Joystick or Fingertip control.

7 @ RX 70 Technical Data Diesel and LPG forklift trucks RX RX RX RX 70-50/600

8 2 RX 70 TECHNICAL DATA This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard truck. Different tyres, other masts, additional equipment etc. could give different figures. Characteristics Weights Wheels chassis Dimensions Performance IC engine Miscellaneous 1.1 Manufacturer STILL GmbH STILL GmbH STILL GmbH STILL GmbH 1.2 Manufacturer s model designation RX RX T RX RX T Manufacture s type designation Drive: electric, diesel, petrol, LPG, mains electric Diesel LPG Diesel LPG 1.4 Operation: manual, pedestrian, stand-on, rider seated, order picker Rider seated Rider seated Rider seated Rider seated 1.5 Rated capacity Q kg Load centre c mm Load distance x mm Wheel base y mm Truck weight kg Axle load front, with load kg Axle load rear, with load kg Axle load front, without load kg Axle load rear, without load kg Tyres: solid rubber, Superelastic (SE), pneumatic, Polyurethan SE SE SE SE 3.2 Tyres size front x 12, x 12, Tyres size rear Number of wheels front (x = driven) 2x 2x 2x 2x Number of wheels rear (x = driven) Track width front b10 mm Track width rear b11 mm Tilt mast/fork carriage, forward Tilt mast/fork carriage, back Closed mast height h1 mm Free lift h2 mm Lift h3 mm Extended mast height h4 mm Height over overhead guard (cabin) h6 mm Seat height/stand height rel. to SIP h7 mm Coupling height h10 mm Overall length l1 mm Length including fork backs l2 mm Overall width b1 mm / / Fork thickness s mm Fork width e mm Fork length l mm Fork carriage ISO 2328, class/form A, B Cl. III, Form A Cl. III, Form A Cl. III, Form A Cl. III, Form A 4.24 Fork carriage width b3 mm Ground clearance beneath mast, with load m1 mm Ground clearance centre wheel base m2 mm Aisle width for pallets 1000 x 1200 wide Ast mm Aisle width for pallets 800 x 1200 long Ast mm Turning radius Wa mm Inner turning radius b13 mm Speed with load km/h Speed without load km/h Lift speed with load m/s 0,59 0,59 0,50 0, Lift speed without load m/s 0,59 0,59 0,54 0, Lowering speed with load m/s 0,50 0,50 0,50 0, Lowering speed without load m/s 0,50 0,50 0,50 0, Drawbar pull with load N Drawbar pull without load N Gradeability with load % Gradeability without load % Acceleration time with load s 5,2 5,1 5,5 5, Acceleration time without load s 4,7 4,6 4,8 4, Service brake Electr./mech. Electr./mech. Electr./mech. Electr./mech. 7.1 Engine manufacturer Deutz VW Deutz VW Type TCD 2,9 L4 CKPA TCD 2,9 L4 CKPA 7.2 Engine performance in accordance with ISO 1585 kw Nominal speed 1/min No. of cylinders Displacement cm³ Fuel consumption in VDI cycle l/h 4,1 4,3 kg/h 3,8 4,0 7.9 On-board voltage V Drive type Diesel-electric Diesel-electric Diesel-electric Diesel-electric 10.1 Hydraulic pressure for attachments bar Oil volume for attachments l/min Volume fuel tank l/kg Sound pressure level LPAZ 2 (driver s seat) db (A) <75 <76 <75 < Sound power level LWAZ (work cycle) db (A) <98 <99 <98 <99 Body vibrations 3 in accordance with EN m/s 2 0,47 0,47 0,47 0, Trailer coupling, type/din Pin Pin Pin Pin 1 With reduced rated capacity and/or limited lift height. // 2 With cabin, higher levels without cabin. // 3 With standard driver s seat.

9 3 This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard truck. Different tyres, other masts, additional equipment etc. could give different figures. Characteristics Weights Wheels chassis Dimensions Performance IC engine Miscellaneous 1.1 Manufacturer STILL GmbH STILL GmbH STILL GmbH STILL GmbH 1.2 Manufacturer s model designation RX RX T RX 70-50/600 RX 70-50/600 T Manufacture s type designation Drive: electric, diesel, petrol, LPG, mains electric Diesel LPG Diesel LPG 1.4 Operation: manual, pedestrian, stand-on, rider seated, order picker Rider seated Rider seated Rider seated Rider seated 1.5 Rated capacity Q kg Load centre c mm Load distance x mm Wheel base y mm Truck weight kg Axle load front, with load kg Axle load rear, with load kg Axle load front, without load kg Axle load rear, without load kg Tyres: solid rubber, Superelastic (SE), pneumatic, Polyurethan SE SE SE SE 3.2 Tyres size front 28 x 12, x 12, x 12, x 12, Tyres size rear Number of wheels front (x = driven) 2x 2x 2x 2x Number of wheels rear (x = driven) Track width front b10 mm Track width rear b11 mm Tilt mast/fork carriage, forward Tilt mast/fork carriage, back Closed mast height h1 mm Free lift h2 mm Lift h3 mm Extended mast height h4 mm Height over overhead guard (cabin) h6 mm Seat height/stand height rel. to SIP h7 mm Coupling height h10 mm Overall length l1 mm Length including fork backs l2 mm Overall width b1 mm 1506/ / / / Fork thickness s mm Fork width e mm Fork length l mm Fork carriage ISO 2328, class/form A, B Cl. III, Form A Cl. III, Form A Cl. III, Form A Cl. III, Form A 4.24 Fork carriage width b3 mm Ground clearance beneath mast, with load m1 mm Ground clearance centre wheel base m2 mm Aisle width for pallets 1000 x 1200 wide Ast mm Aisle width for pallets 800 x 1200 long Ast mm Turning radius Wa mm Inner turning radius b13 mm Speed with load km/h Speed without load km/h Lift speed with load m/s 0,50 0,50 0,50 0, Lift speed without load m/s 0,54 0,54 0,54 0, Lowering speed with load m/s 0,50 0,50 0,50 0, Lowering speed without load m/s 0,50 0,50 0,50 0, Drawbar pull with load N Drawbar pull without load N Gradeability with load % Gradeability without load % Acceleration time with load s 5,9 5,6 6,2 5, Acceleration time without load s 4,9 4,8 5,0 4, Service brake Electr./mech. Electr./mech. Electr./mech. Electr./mech. 7.1 Engine manufacturer Deutz VW Deutz VW Type TCD 2,9 L4 CKPA TCD 2,9 L4 CKPA 7.2 Engine performance in accordance with ISO 1585 kw Nominal speed 1/min No. of cylinders Displacement cm³ Fuel consumption in VDI cycle l/h 4,6 4,8 kg/h 4,3 4,6 7.9 On-board voltage V Drive type Diesel-electric Diesel-electric Diesel-electric Diesel-electric 10.1 Hydraulic pressure for attachments bar Oil volume for attachments l/min Volume fuel tank l/kg Sound pressure level LPAZ 2 (driver s seat) db (A) <75 <76 <75 < Sound power level LWAZ (work cycle) db (A) <98 <99 <98 <99 Body vibrations 3 in accordance with EN m/s 2 0,47 0,47 0,47 0, Trailer coupling, type/din Pin Pin Pin Pin 1 With reduced rated capacity and/or limited lift height. // 2 With cabin, higher levels without cabin. // 3 With standard driver s seat.

10 4 RX 70 TECHNICAL DATA Ast 100 (800) 1000 x 100 b1 b3 b10 b11 h6 h1 h3 e 1200 b13 Wa 1:50 Dimensions relate to vertical mast. Fork distance lockable h4 Adjustable seat ± 90 h8 c h7 h2 Q h10 S m1 m2 l x y l2

11 5 RX 70 TECHNICAL DATA RX RX RX RX 70-50/600 Telescopic mast Triplex mast Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Tyres front ( twin) Tyres rear Track v mm 1136 (1364 twin) Track h mm 1120 Max. width B mm 1380 (1769 twin) Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Tyres front 28 x 12,5-15 ( twin) Tyres rear Track v mm 1210 (1364 twin) Track h mm 1120 Max. width B mm 1506 (1769 twin) Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Tyres front 28 x 12,5-15 ( twin) Tyres rear Track v mm 1210 (1364 twin) Track h mm 1120 Max. width B mm 1506 (1769 twin) Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Tyres front 28 x 12,5-15 ( twin) Tyres rear Track v mm 1210 (1364 twin) Track h mm 1120 Max. width B mm 1506 (1769 twin)

12 6 Rated capacities RX telescopic mast single SE tyres up to Rated capacities RX triplex mast single SE tyres up to Rated capacities RX telescopic mast single SE tyres up to Rated capacities RX triplex mast single SE tyres up to Rated capacities RX telescopic mast single SE tyres up to Rated capacities RX triplex mast single SE tyres up to Residual capacity RX 70-50/600 tele-mast single SE tyres Load centre 3500 c = 1200 mm up to Rated capacities RX 70-50/600 triplex mast single SE tyres Load centre 3500 c = 1200 mm up to With standard forks With integrated side shift and standard forks The values indicated may vary depending on the truck equipment

13 7 RX 70 TECHNICAL DATA Overall concept: Four-wheel counter balance forklift truck with front wheel drive and internal combustion engine. Drive - Diesel-electric drive with hybrid technology. - Diesel/LPG engine with directly connected rotary current generator. - Drive axle with capsulated rotary current drive motor for high torque moment at low motor speed, temperature independent. - Wear free, oil immersed lamella-type brake. - Compact design and extreme agility combined with sensitive drive and lift control for optimum work performance. Ergonomics - Large workspace for the driver with high comfort due to optimum arrangement of controls and individual adaptation of the cabin. - Excellent visibility to all sides. Safety - Low centre of gravity and free floating steering axle for maximum stability. - Outstanding driving stability when cornering no need for electronic assistants. - High residual capacities also for large lift heights. Economy - Low operation costs due to low fuel costs in all work cycles and long maintenance intervals. - Optimum tuning of drive and hydraulic controls for maximum performance or best efficiency. - STILL ProActive reduced downtimes, fast fault detection, transmission of error codes to the STILL service centre. Environment - Lowest CO2 emission. - Exhaust gasses of the engines are far below the limit values required by EU non-road directive 97/68/EG (2004/26/EG) EU level 3b/EPA Tier 4i. Service - Shortest maintenance interval hours of operation. - Fast fault identification in case of damage by computer assisted diagnostics. - Optimum service access thanks to large access holes at the sides. Standard equipment: Drive - Modern, maintenance friendly DEUTZ industrial engine complies to the exhaust regulations only with oxidation catalyst without particle filter. - Volkswagen LPG engine standard with controlled catalyst. Driver s workspace - Low, well visible and large access step. - Long hand grip on overhead guard for different gripping heights. - Large foot well with vibration dampening floor mat and car-style pedals. - Multiple adjustments for the modern seat with high comfort and excellent suspension. - Drive control by car-style single pedal control. - Operation of hydraulic functions with STILL mini levers. - Hydraulic power steering with small steering wheel, ergonomically located off-centre to the left. - Narrow, adjustable steering column without obstructing displays. - Central control and display unit in the field of vision of the driver. - Large storage compartments on the right side and in the rear of the driver s compartment. Parameters to control driving characteristics - Acceleration and braking of the truck with the drive pedal. - Five drive levels can be set by the driver. - Individual adjustment of speed, acceleration and braking for each drive level. - Intelligent drive control with reduction of engine speed after acceleration is completed. Mast and hydraulics - Wide open masts; telescopic and triplex versions available. - Demand governed adjustable hydraulic displacement pump for lift and steering hydraulics. - Hydraulics and drive operate independently, therefore no inching function is needed. Electrical system - Modern CAN bus technology with integrated on-board diagnostics Volt electric system.

14 8 Additional equipment and options*: Truck equipment - Low version for operation in containers or high version for applications in the beverage industry, for example. - Various Superelastic or pneumatic tyre types. - Mud guard extensions to protect the load and the attachment from dirt. - Trailer couplings with various coupling heights. Engine - LPG version alternatively with gas bottles or gas tank. - Regenerative diesel soot particle filter integrated into the counter weight. - Additional air filter for operation in atmospheres with dust or fibres. - Adjustable engine switch-off. - Engine pre-heating for operation in cold regions. Cabin equipment - Modular cabin design with wind screen for front, rear and roof; rear screen heater. - Doors hinged at the rear with large opening angles and two-way sliding windows. - Water operated heater or integrated heater/air condition alternatively. - Parallel windscreen wipers for large field of vision on front and rear screen, with washer system by standard. - Roof screen wiper. - Unbreakable interior and exterior rear view mirrors. - Sun blind and sun visor. - Writing pad with paper clip (detachable). - Comfort seats with textile cover, air suspension, heating, lumbar support, extended backrest. - Swivel plate for seat to turn by 20 when reversing. - Horizontal suspension plate to minimise body vibrations. - Radio/MP3 player integrated in the interior lining of the overhead guard. - Restraint system with bar doors. - STILL EasyBelt the intelligent way to assist fastening the seat belt. - Protective roof grid. Electric devices and drive control - Speed limiter, setting as requested by driver. - Cruise control. - Car-style lighting system, approved for public road traffic. - Halogen or LED spot lights front and/or rear, mounted on the overhead guard, also available as twin lights to improve lighting of the area of work. - Hazard warning and signaling lights. - STILL Safety Light blue dot of light on the travel path when reversing to warn pedestrians of the truck approaching. - Driver assistance: seat belt monitor, speed reduction for lifted loads and when cornering. - Components of the Material flow Management System (MMS). - FleetManager access authorisation, analysis of truck data and accident recorder. Mast and hydraulics - Additional hydraulic functions to operate attachments. - Various fork carriage widths and fork lengths. - Attachments to suit the handled goods. - Buffer oil tank to dampen jerks from the hydraulics. - STILL load measuring system with integrated display and totalling function. - Automatic mast upright setting with progressive stop at end positions. Special equipment - Special equipment versions for operation in particularly difficult applications, e. g. in foundries or cold environmental temperatures. Blue-Q energy optimisation - Activate Blue-Q energy saving mode at the push of a button. - Energy saving due to intelligent optimisation of the drive characteristics without impairing the work process. - Intelligently switches off electrical consumers. - A saving in energy consumption of up to 10 % depending on the application and the truck s equipment. Controls - Drive control by twin pedals. - Joystick or Fingertipp controls for hydraulic functions. *Standard or optional equipment.

15 @ RX 70 Technical data Diesel forklift truck RX RX RX RX 70-80/900

16 2 RX 70 TECHNICAL DATA This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard truck. Different tyres, other masts, additional equipment etc. could give different figures. Characteristics Weights Wheels chassis Dimensions Performance IC engine Miscellaneous 1.1 Manufacturer STILL GmbH STILL GmbH STILL GmbH STILL GmbH 1.2 Manufacturer s model designation RX RX RX RX 70-80/ Manufactuer s type designation Drive: electric, diesel, petrol, LPG, mains electric Diesel Diesel Diesel Diesel 1.4 Operation: manual, pedestrian, stand-on, rider seated, order picker Rider seated Rider seated Rider seated Rider seated 1.5 Rated capacity Q kg Load centre c mm Load distance x mm Wheel base y mm Truck weight kg Axle load front, with load kg Axle load rear, with load kg Axle load front, without load kg Axle load rear, without load kg Tyres: solid rubber, Superelastic, pneumatic, Polyurethane SE SE SE SE 3.2 Tyres size front 355/ / Tyres size rear x 12, Number of wheels front (x = driven) 2 x 4 x 4 x 4 x Number of wheels rear (x = driven) Track width front b10 mm Track width rear b11 mm Tilt mast/fork carriage, forward Tilt mast/fork carriage, back Closed mast height h1 mm Free lift h2 mm Lift h3 mm Extended mast height h4 mm Height over overhead guard (cabin) h6 mm Seat height/stand height rel. to SIP h7 mm Coupling height h10 mm 510/ / / / Overall length l1 mm Length including fork backs l2 mm Overall width b1 mm Fork thickness s mm Fork width e mm Fork length l mm Fork carriage ISO 2328, class/form A, B Cl. IV, form A Cl. IV, form A Cl. IV, form A Cl. IV, form A 4.24 Fork carriage width b3 mm Ground clearance beneath mast, with load m1 mm Ground clearance centre wheel base m2 mm Aisle width for pallets 1000 x 1200 wide Ast mm Aisle width for pallets 800 x 1200 long Ast mm Turning radius Wa mm Inner turning radius b13 mm Speed with load km/h Speed without load km/h Lift speed with load m/s 0,51 0,42 0,42 0, Lift speed without load m/s 0,51 0,44 0,43 0, Lowering speed with load m/s 0,56 0,50 0,50 0, Lowering speed without load m/s 0,52 0,42 0,42 0, Drawbar pull with load N Max. drawbar pull with load N Drawbar pull without load N Gradeability with load % Gradeability without load % Acceleration time with load s 5,4 5,5 5,6 5, Acceleration time without load s 4,9 5,0 5,1 5, Service brake Electr./mech. Electr./mech. Electr./mech. Electr./mech. 7.1 Engine manufacturer Deutz Deutz Deutz Deutz Type TCD 4.1 TCD 4.1 TCD 4.1 TCD Engine performance in accordance with ISO 1585 kw Nominal speed 1/min No. of cylinders Displacement cm³ Fuel consumption in VDI cycle l/h 7,0 7,8 8,6 9,2 7.9 On-board voltage V Drive type Diesel-electric Diesel-electric Diesel-electric Diesel-electric 10.1 Hydraulic pressure for attachments bar Oil volume for attachments l/min Volume fuel tank l Sound pressure level LPAZ 2 (driver s seat) db (A) <75 <75 <75 < Sound power level LWAZ (work cycle) db (A) <97 <97 <97 <97 Body vibrations 3 in accordance with EN m/s 2 0,31 0,31 0,31 0, Trailer coupling, type DIN Pin Pin Pin Pin 2 With cabin, higher levels without cabin. 3 With standard driver s seat.

17 3 Seat adjustable ± 90 h 7 h 6 A st (800) x 100 e 1200 b3 b1 b10 b11 b13 h 8 c h 1 Q h 2 m 1 m 2 h 3 h 10 S h 4 l x y l 2 Forks adjustable Wa 1:50 Dimensions relate to vertical mast.

18 4 RX 70 TECHNICAL DATA RX RX RX RX LSP 900 Telescopic mast Triplex mast Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Max. width B mm Tyres front SE 355/65-15 SE 355/65-15 SE 355/50-20 Tyres rear SE 28 x 9-15 Track v mm Track h mm 1358 Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Max. width B mm 2003 Tyres front SE twin Tyres rear SE Track v mm 1510 Track h mm 1358 Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Max. width B mm Tyres front SE twin SE twin 315/70-15 Tyres rear SE Track v mm 1510 Track h mm 1358 Rated lift h3 mm Closed height h1 mm Free lift h2 mm Max. height h4 mm Max. width B mm 2125 Tyres front SE twin 315/70-15 Tyres rear SE 28 x 12,5-15 Track v mm 1561 Track h mm 1432

19 5 Rated capacities RX telescopic mast single SE tyres 7000 Rated capacities RX triplex mast single SE tyres Load centre c = 1200 mm Load centre c = 1200 mm up to up to Rated capacities RX telescopic mast SE twin tyres 8000 Rated capacities RX triplex mast SE twin tyres Load centre 7000 Load centre c = 1200 mm c = 1200 mm up to up to Rated capacities RX telescopic mast SE twin tyres 9000 Load centre c = 1200 mm 4000 up to Rated capacities RX triplex mast SE twin tyres 9000 Load centre c = 1200 mm 4000 up to Different tyres, other masts, additional equipment etc. could give different figures. Rated capacities RX LSP 900 telescopic mast SE twin tyres 9000 Rated capacities RX LSP 900 triplex mast SE twin tyres Load centre c = 900 mm c = 1100 mm c = 1200 mm Load centre c = 900 mm c = 1100 mm c = 1200 mm up to up to fork length 1800 mm fork length 1800 mm

20 6 RX 70 TECHNICAL DATA Overall concept: Four-wheel counter balance forklift truck with front wheel drive and internal combustion engine. Drive - Diesel-electric drive with hybrid technology. - Diesel engine directly connected to AC current generator. - Drive axle with capsulated rotary current drive motor for high torque moment at low motor speed, temperature independent. - Wear free, oil immersed lamella-type brake. - Compact design and extreme agility combined with sensitive drive and lift control for optimum work performance. Ergonomics - Large workspace for the driver with high comfort due to optimum arrangement of controls and individual adaptation of the cabin. - Excellent visibility to all sides due to off-centre position of the cabin and high seat position. Safety - Low centre of gravity and free floating steering axle for maximum stability. - Outstanding driving stability when cornering no need for electronic assistants. - High residual capacities also for large lift heights. Economy - Low operation costs due to low fuel costs in all work cycles and long maintenance intervals. - Optimum tuning of drive and hydraulic controls to maximum performance or best efficiency. - STILL ProActive reduction of downtimes, fast fault finding, transfer of error codes to the STILL service centre. Environment - Lowest CO2 emission. - Engines are far below the exhaust limit values required by EU nonroad directive 97/68/EG (2004/26/EG) EU level 3b/EPA Tier 4i. Service - Shortest maintenance interval 1000 hours of operation. - Fast fault identification in case of damage by computer assisted diagnostics. - Optimum service access thanks to large access holes at the sides. Standard equipment: Drive - Modern, maintenance friendly DEUTZ industrial engine. - Exhaust system with oxidizing catalyst and subsequent diesel particle filter with permanent regeneration. Driver s workspace - Well visible, large access steps. - Handles on the overhead guard and on the engine cover. - Large footwell with vibration dampening floor mat and car-style pedals. - Modern driver s seat with multiple adjustments with high suspension and dampening comfort. - Drive control by car-style single pedal control. - Operation of hydraulic functions with STILL mini levers. - Hydraulic power steering with small steering wheel, ergonomically located off-centre to the left. - Narrow, adjustable steering column without obstructing displays. - Central control and display unit in the field of vision of the driver. - Large storage compartments on the right side and in the rear of the driver s compartment. Parameters to control driving characteristics - Acceleration and braking of the truck only with the drive pedal. - Five drive levels can be set by the driver. - Individual adjustment of speed, acceleration and braking for each drive level. - Intelligent drive control with reduction of engine speed after acceleration is completed. Mast and hydraulics - Wide mast opening; telescopic and triplex versions available. - Demand governed adjustable hydraulic displacement pump for lift and steering hydraulics. - Hydraulics and drive operate independently, therefore no inching function is needed. Electrical system - Modern CAN bus technology with integrated on-board diagnostics Volt electric system.

21 7 Additional equipment and options*: Truck equipment - Various Superelastic or pneumatic tyres. - Mud guard extensions to protect the load and the attachment from dirt. - Trailer couplings with various coupling heights. Engine - Additional air filter for operation in atmospheres with dust or fibres. - Adjustable engine switch-off. - Engine pre heating for operation in cold regions. Cabin equipment - Modular cabin design with wind screen for front, rear and roof, rear screen heater. - Doors hinged at the rear with large opening angles and two-way sliding windows. - Selection of water heater or integrated heater/air condition. - Parallel windscreen wipers with large field of vision for front and rear screen, with washer system by standard. - Roof screen wiper. - Unbreakable interior and exterior rear view mirrors. - Sun blind and sun visor. - Writing pad with paper clip (detachable). - Comfort seats with textile cover, air suspension, heating, lumbar support, extended backrest. - Swivel plate for seat to turn by 20 when reversing. - Horizontal suspension plate to minimise body vibrations. - Radio/MP3 player integrated in the interior lining of the overhead guard. - Restraint system with bar doors. - STILL EasyBelt the intelligent ways to assist fastening the seat belt. - Protective roof grid. Controls - Drive control by twin pedals. - Joystick or Fingertipp controls for hydraulic functions. Electric devices and drive control - Speed limiter, setting as requested by driver. - Cruise control. - Car-style lighting system, approved for public road traffic. - Halogen or LED spot lights front and/or rear, mounted on the overhead guard, also available as twin lights to improve lighting of the area of work. - Hazard and signalling lights. - STILL Safety Light blue dot of light on the travel path when reversing to warn pedestrians of the truck approaching. - Driver assistance: seat belt monitor, speed reduction for lifted loads and when cornering. - Components of the Material flow Management System (MMS). - FleetManager access authorisation, analysis of truck data and accident recorder. Mast and hydraulics - Additional hydraulic functions to operate attachments. - Various fork carriage widths and fork lengths. - Attachments to suit the handled goods. - Buffer oil tank to dampen jerks from the hydraulics. - STILL load measuring system with integrated display and totalling function. - Automatic mast upright setting with progressive stop at end positions. Special equipment - Special equipment versions for operation in particularly difficult applications, e. g. in foundries or cold environmental temperatures. Blue-Q energy optimisation - Activate Blue-Q energy saving mode at the push of a button. - Energy saving due to intelligent optimisation of the drive characteristics without impairing the work process. - Intelligently switches off electrical consumers - A saving in energy consumption of up to 10 % depending on the application and the truck s equipment. *Standard or optional equipment.

22 @ Your contact STILL Materials Handling Ltd Aston Way Leyland Preston PR26 7UX Phone: +44 (0) Fax: +44 (0) For further information please visit: STILL Materials Handling Ltd 19 Hennock Road Marsh Barton Trading Estate Exeter EX2 8RU Phone: +44 (0) Fax: +44 (0) STILL Materials Handling Ltd George Henry Road Graet Bridge West Midlands DY4 7BZ Phone: +44 (0) Fax: +44 (0) RX EN 12/13 TD Subject to technical modifications.