New propulsion systems for non-road applications and the impact on combustion engine operation

Transcription

1 Research & Technology, New Propulsion Systems (TR-S) New propulsion systems for non-road applications and the impact on combustion engine operation London, 14 th March 2014, Benjamin Oszfolk

2 Content 1 Incentive 1.1 Non-road-applications / MTU products 1.2 Trend of reducing CO 2 emission 1.3 Technological challenges of ICE & propulsion system 2 Electrical enhanced propulsion systems 2.1 E-Drive system 2.2 E-Drive components 2.3 Functional benefits 3 Railcar E-Drive propulsion system 3.1 Application 3.2 System layout & fuel savings 3.3 Impact on internal combustion engine 4 Summary

3 01 Incentive Page 3

4 01 Incentive Non-road applications / MTU products Page 4

5 01 Incentive Trend of reducing CO 2 emissions A significant step towards future CO 2 -targets and reduction in life cycle cost will be achieved only by optimising both, internal combustion Engine and propulsion system Recuperation ~15-25% Effective Energy Primary Energy = CO 2 -Emissions ~5-10% Waste Heat Recovery Losses Benefits of new propulsion systems: Optimised engine operation reduction of real life exhaust gas emissions (NO x, PM, HC) Functional enhancement (e.g. boost capability, temporary silent operation, strong on-board electrical grid) Page 5

6 01 Incentive Trend of reducing CO 2 emissions Fuel Energy Time Power Demand Time The IC engine is able to deliver maximum power at any time and at short notice power-oriented rating and dynamics-optimised operating strategy Page 6

7 01 Incentive Technological challenges of ICE & propulsion system Fuel Energy Time Engine power Time Power Demand Time Power ESS Time Electric motor / generator Energy Storage System (ESS) Future IC engine delivers the energy for a specified mission within a mean power range energy-oriented rating with efficiency-optimised operating strategy Page 7

8 02 Electrical enhanced propulsion systems Page 8

9 02 Electrical enhanced propulsion systems E-Drive system External Information Propulsion control unit Application BMS control DC-Link Power Electronics Aux drives ECU Battery Power Power electronics GCU IC engine Electric motor / generator Gear box Page 9

10 02 Electrical enhanced propulsion systems E-Drive components Controls E-Machine Power Electronics Battery System Power and Energy Management Interface to the Application Safety Functionality Electric motor for propulsion Generator E-Motor for Auxilliaries Traction Converter Geno Rectifier Filter element in the DC- or AC-Bus Auxiliary Supply / Battery Charger Source & Sink: Energy Storage Power Buffer Page 10

11 02 Electrical enhanced propulsion systems Functional benefits Page 11

12 03 Railcar E-Drive propulsion system Page 12

13 03 Railcar E-Drive propulsion system Application Drive cycle: Distance 37 km 13 Stops 43min speed limit 120kph Vehicle: Mass: 78t 2 x MTU 6H1800R75 (2 x 315kW) Electric motors: 2 x 400kW peak Li-Ion-Battery Diesel-mechanical / parallel hybrid Page 13

14 03 Railcar E-Drive propulsion system System layout & fuel savings Implemented features: Regenerative braking Load point shifting Partially electrified auxiliary drives Fuel consumption optimized drive strategy Cumulated fuel consumption [l] Measured fuel savings over time (test bench / real track data) Driving time along a railway track [min] ca. -20% Page 14

15 03 Railcar E-Drive propulsion system Impact on internal combustion engine operation Diesel only consumption optimized drive strategy E-Drive consumption optimized drive strategy +55% 58% fuel conversion 90% fuel conversion 32% 9% 9% Impact on combustion engine: Increase of 55% of fuel conversion at high engine loads Still 9% fuel converted at idle speed Further potential: Decoupling auxiliary drives from combustion engine Engine shutdown during idling Page 15

16 04 Summary Page 16

17 04 Summary New propulsion systems for non-road applications: New propulsion system concepts are capable of significant fuel savings heavily dependent on the application Fuel savings result from optimized operation of internal combustion engine and auxiliary drives Fuel savings result from energy recovery Impact of future propulsion system design on internal combustion engine: Increased fuel conversion at high engine loads mechanical / thermal fatigue? Increased frequency of engine starts main bearings, starter lifetime? Engine shutdown during vehicle operation effect on main bearings? effect on exhaust aftertreatment? Page 17

18 Thank you very much for your attention.