RING TONGUE (R type) Non-insulated
|
|
|
- Blaze Todd
- 6 years ago
- Views:
Transcription
1 Solderless terminals RING ONGU (R type) Non-insulated ile No.: 2 R Refer to page 13 for 2 to (0.2 to 0.) to (0.2 to 1.) to (1.0 to 2.3) Metric JS JIS R MS M M3 R M 1.2- R R NS S2 3 2-MS3 3 2-S M S M3 R P M 2-P 2- R2-2-M 2-NS 2- R2-2- R2-2- R American / 3/ 3/ 1-2 / 3/ 3/ / 2.2 (.07).2 (.). (.). (.) 3.2 (.).2 (.). (.). (.) YH YA (.). (.) 1.0 (.91) 7.7 (.303) (.17) (.079) (.039) (.0) YA-2.3 (.9). (.) 1.0 (.91) 7.7 (.303) C-0.3 (.9).0 (.31) 1.0 (.91) 7.0 (.27) 2.2 (.07). (.217). (.3).0 (.17) 3.2 (.). (.217). (.3).0 (.17) 3.2 (.). (.217) 13.2 (.). (.2) 3.2 (.). (.). (.7).3 (.2) 3.2 (.).0 (.31) 1. (.) 7.0 (.27) 3.7 (.). (.217). (.3).0 (.17) 3.7 (.). (.). (.7).3 (.2) 3.7 (.).0 (.31) 1. (.) 7.0 (.27) YH- YA-1.3 (.9). (.). (.7).3 (.2) YA-2.3 (.9).0 (.31) 1. (.) 7.0 (.27) (.19) (.13) (.07) (.031).3 (.9).0 (.31) 1. (.) 7.0 (.27) C-0.3 (.9) 9.0 (.3). (.03).1 (.37).3 (.9). (.7) 21.7 (.).1 (.37). (.22). (.7) 21.7 (.).1 (.37). (.331). (.7) 21.7 (.).1 (.37) 9. (.3) 13. (.3) 2.(1.00) 13.9 (.7). (.13) 13. (.3) 2.(1.00) 13.9 (.7) 13.0 (.) 19.0 (.7) 31.0(1.2).7 (.7) 2.2 (.07). (.22).3 (.).3 (.9) 3.2 (.). (.217) 13.2 (.). (.2) 3.2 (.). (.22).3 (.).3 (.9) 3.2 (.). (.). (.7).3 (.2) 3.2 (.). (.33). (.1) 7. (.307) 3.7 (.). (.22).3 (.).3 (.9) 3.7 (.). (.). (.7).3 (.2) 3.7 (.) 7.0 (.27).0 (.30) 7.7 (.303) 3.7 (.). (.33). (.1) 7. (.307).3 (.9). (.). (.7).3 (.2) YH-.3 (.9) 7.0 (.27).0 (.30) 7.7 (.303) YA (.9). (.33). (.1) 7. (.307) YA-2 (.19) (.1) (.091) (.031).3 (.9). (.33). (.1) 7. (.307).3 (.9) 9.0 (.3).3 (.799).0 (.33) C-0.3 (.9) 9. (.37). (.1) 7.3 (.27). (.22).0 (.72) 21. (.).0 (.33). (.331).0 (.72) 21. (.).0 (.33) 9. (.3) 13. (.3) 2.(1.00) 13.9 (.7). (.13) 13. (.3) 2.(1.00) 13.9 (.7) 13.0 (.) 19.0 (.7) 31.0(1.2).7 (.7) 1.0 (.91) 27.0(1.03) 39.(1.) 21.2 (.3) 17.0 (.9) 27.0(1.03) 39.(1.) 21.2 (.3) 21.0 (.27) 27.0(1.03) 39.(1.) 21.2 (.3) Note:1) Products with the JIS mark conform to JIS C. 2) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a nominal size of 0. to. with a butted seam, add the prefix "WS" to the part number (ex.2- >WS2-).
2 Refer to page 13 for to (3.) to (2.3 to.) American / / 3/ 3/ 3/ / / Metric JS 3.-R3 3.-R R S S S.-NS.-.-NS.-.-S.NS..-S.-.-S JIS R.- R.- R. R.- R (.).0 (.31) 17. (.707) 9.0 (.3).3 (.9).0 (.31) 17. (.707) 9.0 (.3).3 (.9).3 (.0) 1. (.732). (.339) YH-.3 (.9).0 (.31) 17. (.707) 9.0 (.3) (.19) (.19) (.) (.039) (Dies mark. ) C-0.3 (.9).3 (.0) 1. (.732). (.339). (.22).3 (.0) 1. (.732). (.339) 3.2 (.) 7.2 (.23) 1.7 (.1).9 (.232).2 (.2) 3.2 (.) 9. (.37) 19. (.70).3 (.327). (.2) 3.7 (.) 7.2 (.23) 1.7 (.1).9 (.232).2 (.2) 3.7 (.) 9. (.37) 19. (.70).3 (.327). (.2).3 (.9) 7.2 (.23) 1.7 (.1).9 (.232).2 (.2).3 (.9).0 (.31) 19.1 (.72).3 (.327).3 (.9) 9. (.37) 19. (.70).3 (.327).3 (.9).0 (.31) 19.1 (.72).3 (.327).3 (.9) 9. (.37) 19. (.70).3 (.327).3 (.9) 13.2 (.). (.2) 9.0 (.3). (.22) 9.0 (.3) 2.3 (.97) 13.0 (.) YH- YA-1. (.22).0 (.72) 2.(1.0) 13.0 (.) YA-2. (.22) 13.2 (.). (.2) 9.0 (.3) (.2) (.13) (.039). (.22) 1.0 (.91) 2.0(1.2) 13.7 (.39) C-0.. (.331) 13.2 (.). (.2) 9.0 (.3) (.2). (.331) 1.0 (.91) 2.0(1.2) 13.7 (.39) 9. (.3) 1.0 (.91) 2.0(1.2) 13.7 (.39). (.13) 1.0 (.91) 2.0(1.2) 13.7 (.39). (.13) 19.2 (.7) 32.(1.27).0 (.30) 13.0 (.) 19.2 (.7) 32.(1.27).0 (.30) 1.0 (.91).1(1.9) 2.3 (.99) 17.0 (.9).1(1.9) 2.3 (.99) 19.0 (.7).1(1.9) 2.3 (.99) (.27).1(1.9) 2.3 (.99) Note:1) Products with the JIS mark conform to JIS C. 2) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a nominal size of 0. to. with a butted seam, add the prefix "WS" to the part number (ex..- >WS.-).
3 Solderless terminals RING ONGU (R type) Non-insulated Refer to page 13 to 13 for American Metric JS JIS -NK.3 (.9) 9.0 (.3). (.0). (.).2 (.2) YH-S YP-0N Y-1 Y (Note 2) (. to.2) -NS.3 (.9).0 (.31) 21. (.) 9.3 (.3). (.33) -.3 (.9).0 (.72) 23. (.937) 9.3 (.3). (.33) -NK.3 (.9) 9.0 (.3). (.0). (.).2 (.2) -NS.3 (.9) 9.0 (.3).3 (.7) 9.3 (.3) - R-.3 (.9).0 (.72) 23. (.937) 9.3 (.3) -NS.3 (.9) 9.0 (.3) 2.(1.0) 13. (.3) -.3 (.9) 1.0 (.91) 29.(1.173) 13. (.3) -NS. (.22) 9. (.37). (.90) 9.3 (.3) - R-. (.22).0 (.72) 23. (.937) 9.3 (.3) -. (.22) 1.0 (.91) 29.(1.173) 13. (.3) / -NS. (.331). (.3) 2.1(1.) 13. (.3) / - R-. (.331) 1.0 (.91) 29.(1.173) 13. (.3) 3/ (.3) 1.0 (.91) 29.(1.173) 13. (.3). (.33) 3/ - R-. (.13) 1.0 (.91) 29.(1.173) 13. (.3) 3/ -. (.13).0 (.77) 33.(1.319) 1.0 (.91) -. (.3).0 (.77) 33.(1.319) 1.0 (.91) (.).0 (.77) 33.(1.319) 1.0 (.91) (.91) 31.(1.2) 0.0(1.99) 2.7(1.0) / (.9) 31.(1.2) 0.0(1.99) 2.7(1.0) / (.7) 31.(1.2) 0.0(1.99) 2.7(1.0) (.27) 31.(1.2) 0.0(1.99) 2.7(1.0) Note:1) Products with the JIS mark conform to JIS C. 2) Please use the die AD-901S for the pneumatic tool, and the die NK- for the hydraulic tools YP-0-21/Y (.). (.177) 1.2 (.07) YH-S, YA- YP-0N C-0 C-0N C-10 Y-1 Y Y-10-1 YH-S YP-0N Y-1 Y (Note 2) YH-S YA- YP-0N C-0 C-0N C-10 Y-1 Y Y
4 Refer to page 13 for American Metric JS JIS -.3 (.9).0 (.72) -NK.3 (.9).2 (.0) -NS.3 (.9) 9.0 (.3) - R-.3 (.9).0 (.72) -NK.3 (.9).2 (.0) -NS. (.22) 9. (.37) - R-. (.22).0 (.72) -. (.22).0 (.30) / -NS. (.331). (.3) / -S. (.331).0 (.72) (.2 to / - R-. (.331).0 (.30).7) 3/ (.3).0 (.30) 3/ - R-. (.13).0 (.30) 3/ -. (.13).0 (.) -. (.3).0 (.) - R (.).0 (.) - R- 1.0 (.91) 30.0(1.) / (.9) 31.(1.2) / (.7) 31.(1.2) (.27) 31.(1.2) -NS.3 (.9) 9. (.37) -S.3 (.9).0 (.72) -.3 (.9). (.0) -S. (.22).0 (.72) - R-. (.22). (.0) / -S. (.331).0 (.27) / - R-. (.331). (.0) 3/ (.3) 17. (.9) (.7 to 3/ -S. (.13). (.0) 2.) 3/ - R-. (.13) 17. (.9) -. (.3).0 (.) - R (.).0 (.) - R- 1.0 (.91) 30.0(1.) / (.9) 30.0(1.) / (.7) 30.0(1.) (.27) 30.0(1.) Note:1) Products with the JIS mark conform to JIS C. 2) Delivery lead times may vary depending on the product. Contact JS for details. 29.(1.173) 13.3 (.2). (.13) 23.0 (.90) 7.7 (.303) 9.2 (.32) 0 2.3(1.1) 13.3 (.2) 29.(1.173) 13.3 (.2). (.13) (.90) 7.7 (.303) 9.2 (.32) 0 2.(1.) 13.3 (.2) 0 29.(1.173) 13.3 (.2) 32.(1.291). (.71) YA (1.213). (.71) YP-0N 31.0(1.2). (.71) (1.291). (.71) (.3) (.) (.09) C-0 C-0N 32.(1.291). (.71). C (1.291). (.71) (.13) Y-1 Y (1.) 19. (.739) - Y (1.) 19. (.739) 1.0(1.) 19. (.739) 9.0(1.929) 23. (.92) 1.(2.02) 2.2 (.992) 1.(2.02) 2.2 (.992) 1.(2.02) 2.2 (.992) 2.7(1.130).0 (.72) 30.0(1.).0 (.72) 33.7(1.327) 13. (.31) 30.0(1.).0 (.72) 33.7(1.327) 13. (.31) 30.0(1.).0 (.72) YA- 33.7(1.327) 13. (.31) YP-0N 3.7(1.).0 (.30) C-0N 33.7(1.327) 13. (.31) (.72) (.3) (.303) (.071) C (1.).0 (.30) Y-1 Y (1.73) 19. (.7) - Y (1.73) 19. (.7) 1.(2.02) 2. (.9) 1.(2.02) 2. (.9) 1.(2.02) 2. (.9) 1.(2.02) 2. (.9)
5 Solderless terminals RING ONGU (R type) Non-insulated Refer to page 137 for (except for 3-S9) American Metric JS JIS 3-S.3 (.9) 1. (.) 3-.3 (.9).0 (.) 3-S. (.22) 1. (.) 3-. (.22).0 (.) / 3-S. (.331) 1. (.) / 3- R3-. (.331).0 (.) / 3-. (.331) 30.0(1.) 3/ (.3).0 (.) 2 3/ 9 3-S9 9. (.3) 27.0(1.03) (2. to 3/ 3-S. (.13) 1. (.) 2.2) 3/ 3- R3-. (.13).0 (.) 3/ 3-. (.13) 30.0(1.) 3-. (.3).0 (.) 3- R (.).0 (.) 3- R3-1.0 (.91) 30.0(1.) / (.9) 30.0(1.) / (.7) 30.0(1.) (.27) 30.0(1.) 0-S0.0 (.) 0-S. (.22).0 (.30) 0-. (.22).0 (.) / 0-S. (.331).0 (.30) / 0- R0-. (.331).0 (.) 3/ (.3).0 (.) 1/0 3/ 0-S. (.13).0 (.30) (2.2 to 3/ 0- R0-. (.13).0 (.) 0.7) 0-. (.3).0 (.) 0- R (.).0 (.) 0- R0-1.0 (.91) / (.9) / (.7) (.27) 7/ (.90) 70-. (.22) 2.0 (.9) / 70-. (.331) 2.0 (.9) 3/ (.3) 2.0 (.9) 3/ 70-. (.13) 2.0 (.9) 2/ (.3) 2.0 (.9) (0.7 to (.) 2.0 (.9) 7.2) (.91) / (.9) / (.7) (.27) 7/ (.90) Note:1) Products with the JIS mark conform to JIS C. 2) Part numbers containing "S0" or "0" do not have stud holes. 3.0(1.9).0 (.30) 2.7(1.1) 17.7 (.97) 3.0(1.9).0 (.30) 2.7(1.1) 17.7 (.97) 3.0(1.9).0 (.30) 2.7(1.1) 17.7 (.97) 2.(2.07) 23. (.92) YA- 2.7(1.1) 17.7 (.97) YP-0N 3.0(1.9).0 (.30) C-0N 0 3.0(1.9).0 (.30) (.1) (.2) (.370) (.071) C (1.1) 17.7 (.97) Y-1 Y (2.07) 23. (.92) - Y (1.1) 17.7 (.97) 2.7(1.1) 17.7 (.97) 2.(2.07) 23. (.92) 2.(2.07) 23. (.92) 2.(2.07) 23. (.92) 2.(2.07) 23. (.92) 9.7(1.97).7 (.1).7(1.39).7 (.1) 9.7(1.97).7 (.1).7(1.39).7 (.1) YA- 9.7(1.97).7 (.1) YP-0N 9.7(1.97).7 (.1).7(1.39).7 (.1) C-0N (1.97).7 (.1) C-10 (.709) (.) (.9) (.079) 0 9.7(1.97).7 (.1) Y-1 Y (1.97).7 (.1) - Y-10-1 Y (2.2) 23. (.92) Y-300N 7.(2.2) 23. (.92) 7.(2.2) 23. (.92) 7.(2.2) 23. (.92) 7.(2.2) 23. (.92) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) 1.0(2.00).0 (.77) C (2.00).0 (.77) Y-1 Y-10-1 (.7) (.9) (.2) (.079) 2 - Y (2.02) 2.0(1.02) Y-300N 1.0(2.02) 2.0(1.02) 1.0(2.02) 2.0(1.02) 1.0(2.02) 2.0(1.02) 1.0(2.02) 2.0(1.02) 1
6 Refer to page 137 to 13 for American Metric JS JIS / / 0-S (.22). (.331). (.331) 27.0(1.03) 27.0(1.03) 27.0(1.03).2(2.13).0(2.77).2(2.13).2(2.13).0(2.77).7 (.1).7 (.1).7 (.1) 3/ (.3) 27.0(1.03).2(2.13).7 (.1) 3/ 0-. (.13) 27.0(1.03).2(2.13).7 (.1) C-10 3/0 3/ 0-. (.13).0(2.77) Y-1 Y (.3) 27.0(1.03).2(2.13).7 (.1) (.77) (.7) (.71) (.091) 2 (7.2 to - Y ) (.) 27.0(1.03).2(2.13).7 (.1) Y-300N / / 7/ / / S (.) 1.0 (.91) 17.0 (.9) 19.0 (.7) 21.0 (.27) 23.0 (.90). (.22). (.331). (.331) 2.(1.2) 2.(1.2) 2.(1.2).0(2.77).0(2.77).0(2.77).0(2.77).0(2.77).0(2.77).(2.19) 9.0(2.717).(2.19).(2.19) 9.0(2.717). (.03). (.03). (.03) 3/ (.3) 2.(1.2).(2.19). (.03) 3/ 0- R0-. (.13) 2.(1.2).(2.19). (.03) /0 C-10 3/ 0-. (.13) 9.0(2.717) (9.3 to Y-1 Y (.3) 2.(1.2).(2.19). (.03) (.27) (.7) (.) (.2) 7.2) - Y R (.) 2.(1.2).(2.19). (.03) Y-300N 2 / / 7/ R0- R0- R0-1 R (.) 1.0 (.91) 17.0 (.9) 19.0 (.7) 21.0 (.27) 23.0 (.90) 9.0(2.717) 9.0(2.717) 9.0(2.717) 9.0(2.717) 9.0(2.717) 9.0(2.717) Note:1) Products with the JIS mark conform to JIS C. 2) Part numbers containing "S0" or "0" do not have stud holes.
7 Solderless terminals RING ONGU (R type) Non-insulated Refer to page 13 for 20/300 (7.2 to 12.0) 30 (12.0 to 192.0) Metric American / / 3/ 3/ 3/ 3/ / / / / 7/ 1/ 1 / / 3/ 3/ / / / 7/ 1/ S0 3.0(1.17).0(2.00) 23.0 (.90) (1.17) 1.0(3.19) 3.0(1.17) 10-. (.22) 3.0(1.17).0(2.00) 23.0 (.90) 10-. (.331) 3.0(1.17).0(2.00) 23.0 (.90) 10-. (.331) 3.0(1.17) 1.0(3.19) 3.0(1.17) (.3) 3.0(1.17).0(2.00) 23.0 (.90) R10-. (.13) 3.0(1.17).0(2.00) 21.0 (.27) 10-. (.13) 3.0(1.17).0(2.00) 23.0 (.90) 10-. (.13) 3.0(1.17) 1.0(3.19) 3.0(1.17) 10-. (.3) 3.0(1.17).0(2.00) 23.0 (.90) C-10 R (.) 3.0(1.17).0(2.00) 21.0 (.27) Y-1 Y (.) 3.0(1.17).0(2.00) 23.0 (.90) (1.03) (1.03) (.7) (.) - Y (.) 3.0(1.17) 1.0(3.19) 3.0(1.17) Y-300N R (.91) 3.0(1.17).0(2.77) 23.0 (.90) (.9) 3.0(1.17).0(2.00) 23.0 (.90) R (.9) 3.0(1.17).0(2.77) 23.0 (.90) (.9) 3.0(1.17) 1.0(3.19) 3.0(1.17) R (.7) 3.0(1.17) 1.0(3.19) 3.0(1.17) R (.27) 3.0(1.17) 1.0(3.19) 3.0(1.17) (.90) 3.0(1.17) 1.0(3.19) 3.0(1.17) (.9) 3.0(1.17) 1.0(3.19) 3.0(1.17) (1.2) 3.0(1.17) 1.0(3.19) 3.0(1.17) -S0 3.(1.) 9.0(2.717) 2. (.9) -0 3.(1.).(3.17) 39.0(1.3) -. (.331) 3.(1.) 9.0(2.717) 2. (.9) -. (.331) 3.(1.).(3.17) 39.0(1.3) -. (.13) 3.(1.) 9.0(2.717) 2. (.9) -. (.13) 3.(1.).(3.17) 39.0(1.3) -. (.3) 3.(1.) 9.0(2.717) 2. (.9) (.) 3.(1.) 9.0(2.717) 2. (.9) Y-1 Y (.) 3.(1.).(3.17) 39.0(1.3) (1.2) (1.2) (.27) (.13) - Y-300N (.91) 3.(1.) 9.0(2.717) 2. (.9) (.9) 3.(1.).(3.17) 39.0(1.3) (.9) 3.(1.) 9.0(2.717) 2. (.9) (.7) 3.(1.).(3.17) 39.0(1.3) (.27) 3.(1.).(3.17) 39.0(1.3) (.90) 3.(1.).(3.17) 39.0(1.3) (.9) 3.(1.).(3.17) 39.0(1.3) (1.2) 3.(1.).(3.17) 39.0(1.3) Note:1) Products with the JIS mark conform to JIS C. 2) Part numbers containing "S0" or "0" do not have stud holes. 17
8 Refer to page 139 to 0 for 00 (192.0 to 22.27) N.A. (20) 00/0 (22.27 to 32) Metric American / / 3/ 3/ 3/ / / / / 7/ 1/ 1 / / / 3/ 3/ / / / / / 7/ 1/ S0.0(1.732) 72.0(2.3) 2. (.9) 0-0.0(1.732) 91.0(3.3) 37.(1.7) 0-. (.331).0(1.732) 72.0(2.3) 2. (.9) 0-. (.331).0(1.732) 91.0(3.3) 37.(1.7) (.3).0(1.732) 72.0(2.3) 2. (.9) 0-. (.13).0(1.732) 72.0(2.3) 2. (.9) 0-. (.13).0(1.732) 91.0(3.3) 37.(1.7) 0-. (.3).0(1.732) 72.0(2.3) 2. (.9) (.).0(1.732) 72.0(2.3) 2. (.9) R (.).0(1.732) 7.0(3.071) 2. (.9) Y-1 Y (.).0(1.732) 91.0(3.3) 37.(1.7) (1.20) (1.27) (.9) (.17) - Y-300N (.91).0(1.732) 72.0(2.3) 2. (.9) R0-1.0 (.91).0(1.732) 7.0(3.071) 2. (.9) (.9).0(1.732) 72.0(2.3) 2. (.9) R (.9).0(1.732) 7.0(3.071) 2. (.9) (.9).0(1.732) 91.0(3.3) 37.(1.7) R (.7).0(1.732) 91.0(3.3) 37.(1.7) R (.27).0(1.732) 91.0(3.3) 37.(1.7) R (.90).0(1.732) 91.0(3.3) 37.(1.7) R (.9).0(1.732) 91.0(3.3) 37.(1.7) R (1.2).0(1.732) 91.0(3.3) 37.(1.7) (.) 20- Y-1 Y (.91).0(1.732) 7.0(3.071) 2. (.9) (1.20) (1.02) (1.02) (.177) - Y-300N (.9) 32-S0 0.(1.9).0(3.) 33.(1.319) (1.9).7(.1).0(1.772) 32-. (.331) 0.(1.9).0(3.) 33.(1.319) 32-. (.331) 0.(1.9).7(.1).0(1.772) 32-. (.13) 0.(1.9).0(3.) 33.(1.319) 32-. (.13) 0.(1.9).7(.1).0(1.772) 32-. (.3) 0.(1.9).0(3.) 33.(1.319) (.) 0.(1.9).0(3.) 33.(1.319) (.) 0.(1.9).7(.1).0(1.772) Y-1 Y (.91) 0.(1.9).0(3.) 33.(1.319) (1.39) (1.0) (1.2) (.177) - Y-300N (.9) 0.(1.9).0(3.) 33.(1.319) R (.9) 0.(1.9) 9.2(3.709) 33.(1.319) (.9) 0.(1.9).7(.1).0(1.772) 32-M (.7) 0.(1.9) 9.2(3.709) 33.(1.319) R (.7) 0.(1.9).7(.1).0(1.772) R (.27) 0.(1.9).7(.1).0(1.772) R (.90) 0.(1.9).7(.1).0(1.772) R (.9) 0.(1.9).7(.1).0(1.772) R (1.2) 0.(1.9).7(.1).0(1.772) conform to JIS C. Note:1) Products with the JIS mark 2) Part numbers containing "S0" or "0" do not have stud holes. 1
Ratchet Hand Tools (YHT,YNT,YDT,YG,YS)
Crimping tools / machines Ratchet Hand Tools (YHT,YNT,YDT,YG,YS) Ratchet hand tools are widely used to crimp small terminals. The proper crimping pressure is ensured by a ratchet which automatically controls
Crimping tools / machines Ratchet Hand Tools (YHT,YNT,YDT,YG,YS)
Ratchet Hand Tools (YHT,YNT,YDT,YG,YS) Ratchet hand tools are widely used to crimp small terminals. The proper crimping pressure is ensured by a ratchet which automatically controls the crimping force.
Engineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
Products Catalogue Cable Lugs, Crimping Tools & Bus Bar
Products Catalogue 2012 Cable Lugs, Crimping Tools & Bus Bar Railway series Lugs W/O Inspection Hole S b Ød 2 c 1 c 2 3D70-10 a Ød 1 Ød 3 J 3D Cat No. REF : I.C.F. d1 a b d2 d3 C1 C2 K J s 17 5 3D 5042
Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2
12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2 Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kn 280 (L) mm 7.5 kg Steel carrying
Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
Series SYA3000/5000/7000
1 Port Air Operated Valve Series SYA000/000/7000 Body ported Base mounted Base mounted How to Order A, B port size Thread type Thread piping (Inch size) Nil Rc Symbol Port size Applicable series Symbol
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
Surface mounting, flush mounting, and DIN track mounting
Solid-state Timer H3JA Economical, Compact, Plug-in Timer Time limit, ON-delay, operation with automatic resetting. DIN size (36 x 36 mm), fits standard 8-pin sockets. Wide choice of supply voltages: 24,
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
V130 Service Parts. Back Cap & Control Kits
V130 Service Parts Back Cap & Control Kits V130 Series Back-Cap Kit 3 Position Spring Return V130-BC-01 Item 3: Item 5: Apply multi-purpose grease prior to spring assembly Clean the threads on item 5 and
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Options guide. Electromagnetic flowmeters. M9xx
Options guide Electromagnetic flowmeters M9xx Ordering codes Model Description M 910 -V0 0 0 0 DN50 PN16 Example Sensor M Basic Ex Ex certified (remote version only) Transmitter 910E Economic version 910
Ersatzteilliste. Hydraulikhammer EHB 05. Hagen
Ersatzteilliste Hydraulikhammer EHB 05 Hagen INSTRUCTIONS FOR USE This parts manual describes the configuration of the part components of the product and is intended only to assist to order spare parts
500-YH SINGLE DUCT AIR TERMINAL UNIT FORM EG1 (1101)
500-YH SINGLE DUCT AIR TERMINAL UNIT FORM 130.12-EG1 (1101) Table of Contents General Description.......................................................................3 500-YH Features........................................................................4-5
Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
MATERIAL TEST REPORT/ Q.C. DOCUMENTATION MADE IN CANADA
PRODUCT DESCRIPTION: PUP JOINT 3" 1502 X 3FT NACE NK-030511 DATE: MAY 19 2011 C: 0.320 Mn: 0.540 Si: 0.270 Cr: 1.030 Ni: 0.100 Mo: 0.170 Cu: 0.190 P: 0.007 S: 0.002 Sn: V: Al: 0.029 Yield: 84,000 PSI HB
Spade Terminals: Locking
Spade Terminals: Locking S SERIES FEATURES Tongue snaps around the screw & terminal is locked into place until the mounting screw can be tightened down. vinyl (PVC) 300V, 75 C. INSULATION TYPE WIRE RANGE
Series SYA3000/5000/7000
Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) - Rc Symbol Port size Applicable series Symbol Port size Applicable series F G SYA000 N
PLUMMER BLOCK HOUSINGS
9. BASIC STRUCTURE OF FBJ Bearing Unit / Insert PLUMMER BLOCK HOUSINGS STRUCTURE OF PLUMMER BLOCK HOUSINGS 9 0. MATERIALS AND MACHINING TOLERANCES Plummer Block Housings are cast and produced in accordance
AT Line AT Models, USS/UAT Models, And UT Models 4 ft Nominal Width Units
4 ft Nominal Width Units 14-2E4 14-2F6 14-2E9 14-2F12 14-3E4 14-3F6 14-3E9 14-3F12 14-2F4 14-2G6 14-2F9 14-2G12 14-3F4 14-3G6 14-3F9 14-3G12 Page 2 of 11 7 ft Nominal Width Units 17-2G9 17-2G18 27-2G36
K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22
2 K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22 EKM 60 UNV + UA22 EK 60 UNV + UA22 THK 22 PK 22 PK 60 UNV + UA22 Crimping dies R 22 Crimping die set, 6-240 ² R 22 in plastic case, 10-pce. Tubular cable
Stock QD Bushings. DISMOUNTING 1. Remove pull-up bolts and screw them into TAPPED holes in sheave or sprocket and against flange of QD bushing to
Stock Q s MOUNTING ROCEURE Q USHINGS IMORTANT E SURE TAERE CONE SURFACES OF Q USHING AN INSIE OF SHEAVE OR SROCKET HU ARE RY AN FREE OF ALL FOREIGN SUSTANCES SUCH AS AINT, GREASE, OR IRT. STANAR MOUNTING
HMV/HSV. Manual selector valve. 4-port valve CONTENTS
4-port valve Overview The / series manual selector valves are 4-port valves with a sliding valve method for the main valve. Suitable for operating cylinders of φ0 to φ0. Features Simple ease of operation
Variable displacement axial piston pumps
Variable displacement axial piston pumps SVP series GENERAL INFORMATIONS Variable displacement axial piston pump swash plate design for open circuit-flow sharing control valve. The pump has been designed
2.1 T 211-A TECHNICAL DATA
-INED BUTTERFY VAVE T -A Fully -lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal
Keyseat 180 from split. Available Sure-Grip Bushings (Millimeter Bores-Inch Bolt) F J M N P SKL SFL EL QT JA SH SDS SD SK SF E
B u s h i n g s Sure-Grip * Quick Detachable bushings are easy to install and remove. They are split through flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit.
TECHNICAL INFORMATION
S ECTION Solderless Terminal Construction/Technical Information...-2 Numbering System...-4 Decimal Equivalent Chart...-5 Wire Gauge Conversion...-5 Stud Size Chart...-6 Ring Terminals...-7, 10, 12 Spade
DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER
METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING
3 Terminals, Kits and Tools
3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 6 For more than 30 years, 3M has been a leading supplier of Scotchlok terminals, disconnects, connectors and tools for use in the
High Pressure, High Flow Rate Modular Valves
High Pressure, High Modular Valves EIC-F-14- MODULR VLVES The modular valves are functional elements with which a hydraulic system can be composed and built easily by stacking them with the mounting bolts.
T EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
Fax: PO Box 100, 2222 Moore Rd. Jonesville, MI
1-800-447-3150 Fax: 1-517-849-9516 PO Box 100, 2222 Moore Rd. Jonesville, MI 49250 www.hillsdaleterminal.com INDEX Adapters...12 Battery & Welding Cable...17 Battery Terminals...16 Bullet Connectors...10
UTK/UTT - Multi-blade Damper. Halton UTK, UTT. Multi-blade Damper
Halton UTK, UTT Multi-blade Damper Temperature operation range up to +100 C, optionally up to +200 C Galvanised steel design Classification of casing leakage EN 1751 class B UTK: Shut-off, adjustment,
Multiple Plunger Limit Switch
Multiple Plunger Limit Switch Series Offers igh Sealability and Long Life with Aluminum Die-cast Enclosure Ideal for machine tools and sequential control Switch box has an oil drain Sturdy construction
SLOAN ZURN DELANY INLET SIZE FLUSH CONNECTION ROUGH-IN
WATER CLOSETS -- EXPOSED FLUSHOMETER INSTALLATION 110 Z-6000 402 1" 1-1/2" X 11-1/2" 111 Z-6000-WS-1 402-3 1" 1-1/2" X 11-1/2" 113 Z-6000-1 410 1" 1-1/2" X 16" 114 420 1" 1-1/2" X 34-3/8" 115 Z-6000-2
Adjustable wrenches. Filter and oil drain plugs wrenches. Safety cut
Wrenches Open end wrenches Combination wrenches Offset ring wrenches Slogging wrenches Adjustable wrenches T-handle wrenches Hexagon wrenches Filter and oil drain plugs wrenches Hook wrenches Long lifespan
Shunt wires SHUNT WIRE (JA type)
SHUN WIRE (JA type) 2-ød in-plated in-plated 1 1 art No. JA 1- JA 2- JA - JA 4- JA 5- JA 6- JA 7- JA 8- JA 9- JA 10- JA 11- JA 12- JA 1- JA 14- JA-2501 JA-2502 JA-250 JA-2504 Dimensions ød B 1
Solenoid Pilot Operated Directional Control Valve
Solenoid Pilot Operated Directional Control Valve Features The highly reliale KSO-2 adopted as the pilot valve ensures long service life and stale operation. 1 Nomenclature - JS - - - - 1 2 3 4 5 7 8 9
NovAseptic Valve Pneumatic Stainless Steel Actuator, Normally Closed, ATEX
NovAseptic Valve Pneumatic Stainless Steel Actuator, Normally Closed, ATEX Catalogue Number AX##/110 Pneumatic Stainless Steel Actuator, Normally Closed, ATEX Configuration Ø B A F D Ø C E Nominal Dimensions
(989)
(989)358-6149 www.pcimfg.com Common details and custom modifications include: Turn Downs (single, double, multiple) Keyways Retaining Ring Grooves Threading (Internal & External) Thru Holes Milled lats
LOW VOLTAGE SWITCHGEAR
LOW VOLTAGE SWITCHGEAR S-N Motor Control Mitsubishi Electric s S-N Series contactors are perfect for the control of 3 phase power, either for the direct control of a motor, to supply power to a drive or
Quickstepper FSS Key features
Key features Description Pneumatic/mechanical sequencer with 12 steps and start logic circuits Ready-to-install sequence controller Acknowledgement-controlled motion sequences The Quickstepper is a mini
6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
Eaton ET4020 & ET4040 Crimp Machines
Eaton ET4020 & ET4040 Crimp Machines ET4020 & ET4040 Crimp Machines The ET4020 is a benchtop crimp machine that crimps hydraulic hose assemblies up to 1 1/4" braided and H430 four spiral wire hose. The
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 3 December 2012 SUPERSEDING 30 September 2011 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department of
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 0 bigger sizes upon request Face-to-face:
Conventional specification. External Pilot air specification 0 ~ 0.7. Compact, yet keeps large capacity.» Limited space can be utilized.
Compact, yet keeps large capacity.» Limited space can be utilized. Standard.» SVR 10 series takes over the functions (Valve variations) of discontinued SVA 10 series. Pneumatic Symbols 5(R) 5(R) 5(R) 5(R)
ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090
Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
Direct Operated Type Solenoid Operated Proportional Throttle Valve
Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4 b X EMS-3 Features hese proportional throttle directional control valves perform spool position feedback
BOLTING TECHNOLOGY.
BOLTING TECHNOLOGY www.cmco.eu Bolting Technology Yale bolting technology is the general term of reliable and proven equipment renowned world-wide for controlled tightening or loosening of bolted connections.
Tamil Nadu Public Service Commission
ASSISTANT CONSERVATOR OF FORESTS DOE :02.12.2014 TO 09.12.2014 _ Subjcct:AGRICULTURE ~ Codc:ACFAG ~........ B X 41 AX 81 DX 121 o A 161 c l< 2 cy 42 CY' 82 Dy 122 13 x 162 B ~ J ox 4J c \ 83 D..( 123 c
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 1 bigger sizes upon request Face-to-face:
V230T. Mould Hydraulic Systems. Hydraulic cylinders - high temperature 230 bar V230T
V230T Mould Hydraulic Systems Hydraulic cylinders - high temperature 230 bar V230T V230Tcat.GB01-2006 Hydraulic cylinders-with tie rods 1 2 3 4 5 6 7 8 9 Chrome-plated steel rod, hardened or tempered and
On-off Valves MS-EM, Inch Series Overview
On-off Valves M-EM, Inch eries Overview Manually operated on-off valve for pressurising and exhausting pneumatic systems 2 sizes: M4 grid dimension.6 in, M6 grid dimension 2.4 in Detailed product information
Junction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
Blast tested to 100kg and now 500kg charges and also IED devices
Technical Data Sheet TDSBB 1005 Blast tested to 100kg and now 500kg charges and also IED devices Ballistic and Blast Steel and Aluminium Glazed Window, Door and Screen Systems Blast rated ballistic window
2.2 T 212-A VÁLVULA BORBOLETA REVESTIDA DE PTFE MODELO T 212-A.
VÁVUA BORBOETA REVESTIDA DE MODEO T 212-A Double flanged -ined butterfly valve for shut-off and control services in the chemical Industry. TECHNICA DATA Nominal diameter: Face-to-face: EN 558 Series 20
Threaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Pressure Regulators MS-LR, Inch Series Overview
Pressure Regulators MS-LR, Inch Series Overview High flow rate with minimal pressure drop Suitable for front panel mounting 2 sizes: MS4 grid dimension.6 in, MS6 grid dimension 2.4 in Detailed product
DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
SAV Electronic Valve Actuator
Document No. 155-548 Non-spring Return, 24 Vac/dc, 3-Position Control Description The SAV Non-spring Return (NSR), Electronic Valve Actuator requires a 24 Vac/dc supply to provide three-position (floating)
Figure 1. Locating Vibrators and Reinforcing Beams on Hoppers. Table I. Reinforcement Channel Selection CAUTION
Vibrolator Ball Vibrator Installation Instructions! DANGER Before installing equipment, turn off and lock out/tag out all energy sources to the hopper, conveyor, and/or conveyor accessories according to
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 1 bigger sizes upon request Face-to-face:
Direct Operated Type Solenoid Operated Proportional Throttle Valve
efore using the product, please check the For latest information, DF catalogs and operation manuals Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4
RHM04. Compact Coriolis Flow Sensor With Enhanced Performance. Features. Applications. Benefits
RHM04 Compact Coriolis Flow Sensor With Enhanced Performance Features Standard high pressure versions up to 1067 bar (15475 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
LOKRING Automotive Service Connectors For the Automotive AC Field
Local Distributor: LOKRING Automotive Service Connectors For the Automotive AC Field American LOKRING Corporation 2525 Dundee Road Winter Haven, FL 33884 863-325-9262 www.lokringusa.com FX-863-324-8626
230 kv Aluminum Welded Couplers TYPE or Straight Adapter Tube To Cable
TYPE 14700 Straight Adapter Tube To Cable Adapter is designed to make inline connection between pipe and stranded cable. Cable is puddle welded to connector; connector is then welded to tube. Not recommended
10 SERIES MODULAR VALVES
General Information Mounting Surface : ISO 441-A-1-4-A, CETOP-1, NPA-D1 Up to 5 MPa (363 PSI), 8 L /min (11 U.S.GPM) Pub. EC-145 The modular valves are functional elements with which a hydraulic system
Throttle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T
LINE - HIDE. Lineset Cover System PROTECT & BEAUTIFY. A complete system for completing the job
L Lineset PROTECT & BEAUTIFY A complete system for completing the job L Lineset PRODUCT INFORMATION & SPECIFICATIONS Dimensions (in inches) Weight Product A B C D E (ounces) Split Line Tube (PVC) CD-60
10 mm. 7.5 mm. 40 mm. 4 Port Solenoid Valve. Series SJ2000/3000 SJ3000 SJ2000. Cassette Type Manifold. Connecter connection
Rubber Seal Port Solenoid Valve Series SJ000/000 Cassette Type Manifold 0 mm 7. mm (SJ000) 0 mm (SJ000) Non plug-in type Individual wiring manifold SJ000 SJ000 Can be mounted together. Connecter connection
4 Port Solenoid Valve Cassette Type Manifold Rubber Seal
Port Solenoid Valve Cassette Type Manifold Rubber Seal 7.mm (SJ000) SJ000 SJ000 Can be mounted together. 0mm (SJ000) Connector connection New New cable type manifold is added! New Additional options are
SERIES 54 Inductive Proximity Sensor
SENSOR FEATURES > 2-wire DC sensor with minimum off-state current > ATEX-approval for zone 2 and zone 22 > High temp, UV, salt water resistant > Rugged metal base > IP66/67/69K > High impact protection
flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
B R E N N A N c a t a l o g
B R E N N A N c a t a l o g $ 15 00 Dear Valued Customer: We are pleased to present our hydraulic tube fitting and adapter catalog. Since 1953, Brennan Industries, Inc. has been supplying hydraulic tube
Sta-Kon s Long Barrel Design
Terminals Why Sta-Kon Terminals Are Better Like any other value added manufacturing process, using the best material is only a start. Our Sta- Kon terminals are all manufactured with the customer in mind,
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15524 First edition 2011-11-01 Pneumatic fluid power Cylinders Single-rod short-stroke cylinders, 1 000 kpa (10 bar) series, bores from 20 mm to 100 mm Transmissions pneumatiques
97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface
9700 NAMUR / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, NAMUR Interface For single and double acting actuators / or / way function in one valve Easily interchangeable
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flows and an additional piggybacked gear pump for auxiliary service,
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
ER100 Series OUT. Specifications. Working fluid Working pressure range Control pressure range. Input voltage 2 wire Input impedance.
Electro pneumatic regulator (nozzle flapper method) ER Series Variable controlling air pressure with electric signals ( to V DC / to ma DC) up to.mpa. Booster relay integrated and large flow rate. JIS
Connectors for fluid power and general use Designation and nomenclature
TECHNICAL SPECIFICATION ISO/TS 11672 First edition 2016-09-01 Connectors for fluid power and general use Designation and nomenclature Connecteurs pour transmissions hydrauliques et applications générales
SMALL TERMINALS TABLE OF CONTENTS
BURNDY Products Small Terminals SMALL TERMINALS TABLE OF CONTENTS B-1 General Information............ B-2, B-3 MIL. SPEC. Equivalent Tables........ B-4 Types T & YAD.................... B-5 Types TP &
06 SERIES MODULAR VALVES. Pub. EC-1404
6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system
LIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
Termination Products. Installing Kits. Recommended Tools. Plier-Type Tools Used for installation of various Sta-Kon terminal series
Installing Kits Recommended Tools The Shure-Stake mechanism on mechanical ratchet tools and power tools prevents the dies from releasing the terminal until the proper compression has been completed. With
Technical Instructions Flowrite 599 Series SKD6xU Electronic Valve Actuators 24 Vac Proportional Control Description Features Application
Document No. 155-180P25 Flowrite 599 Series SKD6xU Electronic Valve Actuators 24 Vac Proportional Control Description The Flowrite 599 Series SKD6xU Electronic Valve Actuators require a 24 Vac supply and
Wire Termination Tools and Installation Kits Recommended Tools
Recommended Tools The Shure-Stake mechanism on mechanical ratchet tools and power tools prevents the dies from releasing the terminal until the proper compression has been completed. With this method,
24 V AC/DC, -10%..+20%, 0-60Hz. 250 ma for max 2 min
Technical Data Sheet Thermoelectric Heads TE 16/03/2018 Function s function by exploiting the expansion of a thermosensitive element, which is heated up through an electrical resistor when the valve needs