R6 ReziFlow. Controlled, led, yet gentle reciprocating motion.
|
|
- Jack Kelly
- 6 years ago
- Views:
Transcription
1 R6 ReziFlow. Controlled, led, yet gentle reciprocating motion.
2 Brasseler, Komet, CeraBur, CeraCut, CeraDrill, CeraFusion, CeraPost, CompoClip, CompoStrip, DC1, DCTherm, FastFile, F360, F6 SkyTaper, H4MC, MicroPlant, OptiPost, PolyBur, TissueMaster, TMC and TissueMaster Concept are registered trademarks of Gebr. Brasseler GmbH & Co. KG. Some of the products and designations mentioned in the text are trademarked, patented or copyrighted. The absence of a special reference or the sign should not be interpreted as the absence of legal protection. This publication is copyrighted. All rights, also with regard to translation, reprint and reproduction (also in the form of extracts) are reserved. No part of this publication may be reproduced or reprocessed using electronic systems in any form or by any means (photocopying, microfilm or other methods) without the written permission of the editor. Colours and products are subject to alterations. Printing errors excepted. As at August 2017
3 R6 ReziFlow 3 Reciprocating treatments have never been so gentle. Reciprocating 1-file system made of NiTi Gentle and controlled work, thanks to low screw-in effect Constant taper for a gentle preparation and homogenous filling Cuts to the left, therefore suited for use in all established reciprocating motors
4 4 R6 ReziFlow R6 ReziFlow - Unrivalled gentleness: Factual and perceived. Reciprocating treatments have never been so gentle thanks to the R6 ReziFlow system. The design of the R6 ReziFlow files is optimally adapted to reciprocating movements. Provided with a reduced number of spirals, the file has a low screw-in effect, which allows perceivably more gentle treatments. The operator stays in complete control of the file throughout the session. At the same time, the intelligent cross-section of the file ensures effective substance removal whilst perfectly preserving the original curvature of the canal. sharp cutting edge Properties and advantages: Reciprocating 1-file system made of NiTi Excellent control of the file in the canal thanks to low screw-in effect Constant taper, perfectly adapted to the instrument size, for a gentle preparation, efficient irrigation and homogenous filling Fast cutting, perfectly flexible Double-S cross-section with large spaces for chip removal Comprehensive range containing the perfect file for any canal anatomy 6 sizes: lengths: L21/L25/L31 large chip space for optimum evacuation of debris special instrument core for excellent flexibility and stability Cuts to the left, therefore suited for use in all established reciprocating motors Double-S file cross-section
5 R6 ReziFlow 5 [ Optional ] Generous preparation of the canal entrance region, for example with the Opener OP10L [ 01 ] Creation of a glide path, for example with a K-file in size 015. The appropriate R6 ReziFlow file is chosen depending on the size of the previously used (manual) file. General rule: Skip one ISO size. [ 02 ] Reciprocating canal preparation with the R6 ReziFlow file. [ 03 ] Obturation with a matching gutta-percha tip.
6 6 R6 ReziFlow R6 ReziFlow. The system with a gentle touch. R6 ReziFlow Main sizes with matching taper.06 R06L /.06 R06L /.06 R06L /.06 "I am really impressed with the R6 ReziFlow system made by Komet. What I like best is that the files are so easy to control. Unlike other file systems, there is no screw-in effect. The files are extremely flexible, which means that I can prepare even curved canals without errors. I would recommend this system to all my colleagues." Nils Widera Dentist from Leipzig, Germany Specialized in Endodontics R06L /.06 Available in the lengths 21 mm, 25 mm and 31 mm. [6 files per blister] R6 ReziFlow Additional sizes with matching taper /.06 Optional for wide canals R06L /.04 Advantages of sterile packed single-use instruments: Reduced risk of fracture caused by cyclic fatigue No risk of cross-contamination No need for time-consuming reprocessing (cleaning, disinfection and sterilization) and recording of the number of uses R06L /.04 Available in the lengths 21 mm, 25 mm and 31 mm. [6 files per blister]
7 Accessories for obturation: PPR06 R6 ReziFlow Paper points GPR06 R6 ReziFlow Gutta-percha points 9978 EasySeal Root filling material based on epoxy resin 9994 F360 Fill Oven 9996 F360 Fill Obturators 9995 F360 Fill Verifier
8 Komet Dental Gebr. Brasseler GmbH & Co. KG Trophagener Weg Lemgo Postfach Lemgo Germany Verkauf Deutschland: Telefon +49 (0) Telefax +49 (0) Export: Telefon +49 (0) Telefax +49 (0) / V1
Tabella generale Carburo di tungsteno Ordering guide Tungsten carbide
Tabella generale Carburo di tungsteno Ordering guide Tungsten carbide 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri
More informationTabella generale Carburo di tungsteno Ordering guide Tungsten carbide
Tabella generale Carburo di tungsteno Ordering guide Tungsten carbide 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri
More informationSimple, fast, efficient.
Sterilization, Hygiene & Maintenance Simple, fast, efficient. Oil service in record time. No waiting. No stress. Oil service without waiting Running smoothly Green light for added efficiency: With the
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO
More informationTwinLine The new system of wall-mounting and floor-standing cabinets
04 2012 TwinLine The new system of wall-mounting and floor-standing cabinets 04 2012 TwinLine The new system of wall-mounting and floor-standing cabinets 2 2CPC 000 170 L0201 TwinLine The new system of
More informationSCHOTT Instruments Process holders and accessories CHEMFIT. Process holder Technical Information
SCHOTT Instruments Process holders and accessories CHEMFIT Process holder Technical Information All brand and product names are trademarks of the company Si Analytics Copyright notice Distributed by: SI
More informationlinear technology. The compact car wash with The SoftLine Linear SL30 offers you a gateway to the car wash business in small spaces.
, The Compact One The compact car wash with linear technology. The SoftLine Linear SL30 offers you a gateway to the car wash business in small spaces., Ideal for over 1500 washes per month, Linear technology
More informationThe powerful unit for effective soil stabilization Tractor-towed stabilizer WS 220 and WS 250
The powerful unit for effective soil stabilization Tractor-towed stabilizer WS 220 and WS 250 Boost up your tractor to become a stabilizing pro Flawless mixing results and perfect levelling are the hallmarks
More informationSKF, the market leader for gas spring seals
Gas spring seals SKF, the market leader for gas spring seals Gas springs are hydropneumatic devices that lift, lower and position equipment of all types. A very important component of these devices is
More informationTechnical information No. 01. IT systems. The basis for reliable power supply
IT systems The basis for reliable power supply FA01en/01.2004 IT systems The basis for reliable power supply in critical areas The advantages of sophisticated industrial systems can only be of use, if
More informationISO 1217 INTERNATIONAL STANDARD. Displacement compressors Acceptance tests. Compresseurs volumétriques Essais de réception. Fourth edition
INTERNATIONAL STANDARD ISO 1217 Fourth edition 2009-07-01 Displacement compressors Acceptance tests Compresseurs volumétriques Essais de réception Reference number ISO 1217:2009(E) ISO 2009 PDF disclaimer
More informationISO 2941 INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating
INTERNATIONAL STANDARD ISO 2941 Second edition 2009-04-01 Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating Transmissions hydrauliques Éléments filtrants Vérification
More informationISO INTERNATIONAL STANDARD. Diesel engines End-mounting flanges for pumps Part 1: Fuel injection pumps
INTERNATIONAL STANDARD ISO 7299-1 First edition 2007-02-01 Diesel engines End-mounting flanges for pumps Part 1: Fuel injection pumps Moteurs diesels Brides de montage des pompes Partie 1: Pompes d'injection
More informationUSE, CARE & STERILIZATION INSTRUCTIONS. Consumable Accessories Burs Saw Blades K-Wires Steinmann Pins Twist Drills Rasps Ortho Pins/Drills Guide Wires
USE, CARE & STERILIZATION INSTRUCTIONS Consumable Accessories Burs Saw Blades K-Wires Steinmann Pins Twist Drills Rasps Ortho Pins/Drills Guide Wires Rx Only EXPLANATION OF SYMBOLS 2 g h i N B D L M d
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7299-2 First edition 2009-02-15 Diesel engines End-mounting flanges for pumps Part 2: High-pressure supply pumps for common rail fuel injection systems Moteurs diesels Brides
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests
INTERNATIONAL STANDARD ISO 16001 First edition 2008-02-15 Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests Engins de terrassement Dispositifs de détection
More informationISO INTERNATIONAL STANDARD. Reciprocating internal combustion engines Performance Part 4: Speed governing
INTERNATIONAL STANDARD ISO 3046-4 Third edition 2009-12-01 Reciprocating internal combustion engines Performance Part 4: Speed governing Moteurs alternatifs à combustion interne Performances Partie 4:
More informationISO INTERNATIONAL STANDARD. Tools for moulding Tool specification sheet for diecasting dies
INTERNATIONAL STANDARD ISO 24233 First edition 2008-02-15 Tools for moulding Tool specification sheet for diecasting dies Outillage de moulage Formulaire de spécifications d'outils pour moules pour fonderie
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationISO 1185 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1185 Third edition 2003-10-15 Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationISO 4927 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4927 Second edition 2005-06-15 Road vehicles Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service
More informationISO 4411 INTERNATIONAL STANDARD. Hydraulic fluid power Valves Determination of pressure differential/flow characteristics
INTERNATIONAL STANDARD ISO 4411 Second edition 2008-10-01 Hydraulic fluid power Valves Determination of pressure differential/flow characteristics Transmissions hydrauliques Distributeurs Détermination
More informationISO 7612 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7612 Fourth edition 2009-10-15 Diesel engines Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems Mounting dimensions
More informationISO INTERNATIONAL STANDARD. Road vehicles Tachograph systems Part 5: Secured CAN interface
INTERNATIONAL STANDARD ISO 16844-5 First edition 2004-08-01 Road vehicles Tachograph systems Part 5: Secured CAN interface Véhicules routiers Systèmes tachygraphes Partie 5: Interface CAN sauvegardée Reference
More informationISO 8714 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8714 First edition 2002-11-01 Electric road vehicles Reference energy consumption and range Test procedures for passenger cars and light commercial vehicles Véhicules routiers
More informationISO INTERNATIONAL STANDARD. Agricultural wheeled tractors and attachments Front loaders Carriages for attachments
INTERNATIONAL STANDARD ISO 23206 First edition 2005-06-01 Agricultural wheeled tractors and attachments Front loaders Carriages for attachments Tracteurs agricoles à roues et accessoires Chargeuses frontales
More informationISO 8665 INTERNATIONAL STANDARD. Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations
INTERNATIONAL STANDARD ISO 8665 Third edition 2006-06-01 Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations Petits navires Moteurs marins de propulsion
More informationISO 4395 INTERNATIONAL STANDARD. Fluid power systems and components Cylinder piston rod end types and dimensions
INTERNATIONAL STANDARD ISO 4395 Second edition 2009-10-15 Fluid power systems and components Cylinder piston rod end types and dimensions Transmissions hydrauliques et pneumatiques Dimensions et types
More informationISO/TR TECHNICAL REPORT. Plain bearings Recommendations for automotive crankshaft bearing environments
TECHNICAL REPORT ISO/TR 27507 First edition 2010-07-15 Plain bearings Recommendations for automotive crankshaft bearing environments Paliers lisses Recommendations pour les environnements des paliers de
More informationISO 4409 INTERNATIONAL STANDARD. Hydraulic fluid power Positivedisplacement
INTERNATIONAL STANDARD ISO 4409 Second edition 2007-04-01 Hydraulic fluid power Positivedisplacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14396 First edition 2002-06-01 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission
More informationSolus STRAIGHT STAIRCASES
Solus S T A I R L I F T STRAIGHT STAIRCASES 600,000 people worldwide have chosen a Stannah stairlift to help them keep their independence Stannah. Enjoy freedom in your home Life is better when you have
More informationA-dec 300 LED Dental Light
Instructions for Use A-dec 300 LED Dental Light Models 371L 378L A-dec 300 LED Dental Light Instructions for Use Copyright 2018 A-dec Inc. All rights reserved. A-dec Inc. makes no warranty of any kind
More informationAutomotive Powertrain Assembly Analysis with Abaqus
Automotive Powertrain Assembly Analysis with Abaqus Seminar Lecture 1 Lecture 2 Lecture 3 Lecture 4 Lecture 5 Lecture 6 Introduction and Motivation Contact Gaskets and Bolt Loading Thermal Stress Analysis
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5692-1 First edition 2004-04-01 Corrected version 2004-09-15 Agricultural vehicles Mechanical connections on towed vehicles Part 1: Dimensions for hitch rings of 50/30 mm cross
More informationHST -LS Interlocking device (Translation of Original Manual)
Installation and Operating Manual for Components HST -LS Interlocking device (Translation of Original Manual) HST-LS Ident.-No.: 10268 HST-LS Ident.-No.: 10269 HST-LS, pictured Ident-Nr. 10269 The image
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-4 Second edition 2007-12-15 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state test cycles for different engine applications Moteurs
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13726 Second edition 2008-03-01 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm Accessory mounting dimensions Transmissions
More informationDatasheet ERHARD ECLI butterfly valve
Datasheet ERHARD ECLI butterfly valve Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6489-3 Second edition 2004-06-01 Agricultural vehicles Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar Véhicules agricoles Liaisons mécaniques
More informationTabella generale Diamantate Ordering guide Diamond
Tabella generale Diamantate Ordering guide Diamond 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri al min. 1 /rpm
More informationRepeatable perfection comes to Wide Format
Repeatable perfection comes to Wide Format Wide Format fascinates me because it offers plenty of room for the development of big and creative solutions for an industry that is demanding higher levels of
More information67095 EN V0515 NOUVAG AG, all rights reserved Subject to change. Dental equipment for Implantology and Endodontic applications
67095 EN V0515 NOUVAG AG, all rights reserved Subject to change Dental equipment for Implantology and Endodontic applications MD 11 meets the heart of the matter A Motor System capable of perfectly accomplishing
More informationISO INTERNATIONAL STANDARD. Tyres Electrical resistance Test method for measuring electrical resistance of tyres on a test rig
INTERNATIONAL STANDARD ISO 16392 First edition 2007-10-15 Tyres Electrical resistance Test method for measuring electrical resistance of tyres on a test rig Pneumatiques Résistance électrique Méthode d'essai
More informationISO INTERNATIONAL STANDARD. Road vehicles Road load Part 2: Reproduction on chassis dynamometer
INTERNATIONAL STANDARD ISO 10521-2 First edition 2006-10-01 Road vehicles Road load Part 2: Reproduction on chassis dynamometer Véhicules routiers Résistance sur route Partie 2: Reproduction sur banc dynamométrique
More informationPosiTest. Pull-Off Adhesion Tester. INSTRUCTION MANUAL v PosiTest AT-M (manual) PosiTest AT-A (automatic)
PosiTest Pull-Off Adhesion Tester INSTRUCTION MANUAL v. 4.0 PosiTest AT-M (manual) PosiTest AT-A (automatic) Introduction The portable, hand-operated PosiTest Pull-Off Adhesion Tester measures the force
More informationE-training. Operating characteristics and sizing of pneumatic actuators. The main types of pneumatic actuator
Welcome to the K Controls e-training course designed to deliver useful Pneumatic Valve Actuation application information in small instalments. To unsubscribe or to register a colleague to receive these
More informationProtection of Power Electronic Multi Converter Systems in AC and DC Applications
Protection of Power Electronic Multi Converter Systems in AC and DC Applications Prof. Norbert Grass Technische Hochschule Nürnberg, Institute for Power Electronic Systems, Nuremberg, Germany, Norbert.Grass@th-nuernberg.de
More informationISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie
INTERNATIONAL STANDARD ISO 9129 Second edition 2008-05-15 Motorcycles Measurement methods for moments of inertia Motocycles Méthodes de mesure des moments d'inertie Reference number ISO 2008 PDF disclaimer
More informationISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge
INTERNATIONAL STANDARD ISO 10605 First edition 2001-12-15 Road vehicles Test methods for electrical disturbances from electrostatic discharge Véhicules routiers Méthodes d'essai des perturbations électriques
More informationISO INTERNATIONAL STANDARD. Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance
INTERNATIONAL STANDARD ISO 18164 First edition 2005-07-01 Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance Pneumatiques pour voitures particulières, camions, autobus
More informationISO 4409 INTERNATIONAL STANDARD. Hydraulic fluid power Positivedisplacement
INTERNATIONAL STANDARD ISO 4409 Second edition 2007-04-01 Hydraulic fluid power Positivedisplacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance
More informationISO INTERNATIONAL STANDARD. Mopeds Methods for setting the running resistance on a chassis dynamometer
INTERNATIONAL STANDARD ISO 28981 First edition 2009-11-01 Mopeds Methods for setting the running resistance on a chassis dynamometer Cyclomoteurs Méthodes pour fixer la résistance à l'avancement sur un
More informationISO INTERNATIONAL STANDARD. Straight cylindrical involute splines Metric module, side fit Part 2: Dimensions
INTERNATIONAL STANDARD ISO 4156-2 First edition 2005-10-01 Straight cylindrical involute splines Metric module, side fit Part 2: Dimensions Cannelures cylindriques droites à flancs en développante Module
More informationHIGH SPEED AIR HANDPIECES
HIGH SPEED AIR HANDPIECES NLXK Powerful Performance Up to 26 watts of power for smoother cutting efficiency Slim neck design for improved visibility Durable ceramic ball bearings with 3-year warranty Four-port
More informationISO 1728 INTERNATIONAL STANDARD. Road vehicles Pneumatic braking connections between motor vehicles and towed vehicles Interchangeability
INTERNATIONAL STANDARD ISO 1728 Third edition 2006-09-01 Road vehicles Pneumatic braking connections between motor vehicles and towed vehicles Interchangeability Véhicules routiers Liaisons de freinage
More informationMOBILAIR M 13/M 15/M 17. Portable Compressors With the world-renowned SIGMA PROFILE Flow rate 0.75 to 1.60 m³/min (27 57 cfm) COMPRESSORS
COMPRESSORS MOBILAIR M 13/M 15/M 1 Portable Compressors With the world-renowned SIGMA PROFILE Flow rate 0.5 to 1.60 m³/min (2 5 cfm) www.kaeser.com MOBILAIR M 13/M 15/M 1 Minimal space requirement Compact
More informationISO INTERNATIONAL STANDARD. Pneumatic fluid power Cylinders Final examination and acceptance criteria
INTERNATIONAL STANDARD ISO 10099 Second edition 2001-05-01 Pneumatic fluid power Cylinders Final examination and acceptance criteria Transmissions pneumatiques Vérins Critères de réception et de vérification
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 16183 First edition 2002-12-15 Heavy-duty engines Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1726 Third edition 2000-05-15 Road vehicles Mechanical coupling between tractors and semi-trailers Interchangeability Véhicules routiers Liaisons mécaniques entre tracteurs et
More informationStarla S T A I R L I F T CURVED STAIRCASES
Starla S T A I R L I F T CURVED STAIRCASES 600,000 people worldwide have chosen a Stannah stairlift to help them keep their independence Stannah. Your first step to freedom Life is better when you have
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9386-2 First edition 2000-11-01 Power-operated lifting platforms for persons with impaired mobility Rules for safety, dimensions and functional operation Part 2: Powered stairlifts
More informationISO INTERNATIONAL STANDARD. Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification
INTERNATIONAL STANDARD ISO 12924 First edition 2010-05-01 Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification Lubrifiants, huiles industrielles et produits connexes
More informationTM Intelligent battery charger for Car- System
TM-42200 Intelligent battery charger for Car- System User's manual 2011 BioDigit Ltd. All rights reserved. It is forbidden to reproduce and/or publish the contents of the present document in any form including
More informationMini UHV gate valve with manual actuator with pneumatic actuator
Mini UHV gate valve with manual actuator with pneumatic actuator This manual is valid for the valve ordering numbers: 004/8/3/34-. E0/08 004/8/3/34-. E//3/4 004/8/3/34-. E//3/4 004/8/3/34-. E4/4/34/44
More informationAutomotive NVH with Abaqus. About this Course
Automotive NVH with Abaqus R 6.12 About this Course Course objectives Upon completion of this course you will be able to: Perform natural frequency extractions Perform sound radiation analyses (acoustics)
More informationISO INTERNATIONAL STANDARD. Measurement of noise emitted by accelerating road vehicles Engineering method Part 2: L category
INTERNATIONAL STANDARD ISO 362-2 First edition 2009-07-15 Measurement of noise emitted by accelerating road vehicles Engineering method Part 2: L category Mesurage du bruit émis par les véhicules routiers
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationInstallation, Operating & Maintenance Instructions. HV gate valve with pneumatic actuator. Series 110 DN mm (I. D.
Installation, Operating & Maintenance Instructions HV gate valve with pneumatic actuator Series 110 DN 250 320 mm (I. D. 10" 12") This manual is valid for the following product ordering numbers: 11048-.
More informationEN. SKF Grease Spraying System For Large Open Gears. Extend the lifetime of large gear drives
1-4012-EN SKF Grease Spraying System For Large Open Gears Extend the lifetime of large gear drives Gear drives Large gear drives are used to transmit movement under very heavy loads. They are open gear
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10816-3 Second edition 2009-02-01 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 3: Industrial machines with nominal power above
More informationERHARD is a company of. Datasheet ERHARD ball valve
ERHARD is a company of Datasheet The economical solution for high pressures and high flow rates Especially with high flow velocities up to 5 m/s and pressure ratings up to PN 4, the offers the ideal and
More informationISO/TR TECHNICAL REPORT. Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life
TECHNICAL REPORT ISO/TR 1281-1 First edition 2008-12-01 Rolling s Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life Roulements Notes explicatives sur l'iso 281 Partie
More informationSiena S T A I R L I F T STRAIGHT STAIRCASES
Siena S T A I R L I F T STRAIGHT STAIRCASES 500,000 people worldwide have chosen a Stannah stairlift to help them keep their independence Stannah. For true freedom in your home Life is better when you
More informationControl Gate Valve with stepper motor actuator
Control Gate Valve with stepper motor actuator This manual is valid for the valve ordering numbers: 64036-.E52 and 64040-.E52 The respective product identification is given on each valve in the following
More informationISO INTERNATIONAL STANDARD. Compressed air Part 5: Test methods for oil vapour and organic solvent content
INTERNATIONAL STANDARD ISO 8573-5 First edition 2001-12-15 Compressed air Part 5: Test methods for oil vapour and organic solvent content Air comprimé Partie 5: Méthodes d'essai pour la teneur en vapeurs
More informationInstallation, Operating & Maintenance Instructions. UHV gate valve with pneumatic actuator. Series 108 DN mm (I. D. 2½ 8 )
Installation, Operating & Maintenance Instructions UHV gate valve with pneumatic actuator Series 108 DN 63 200 mm (I. D. 2½ 8 ) This manual is valid for the following product ordering numbers: 108.. -.
More informationStarla STRAIGHT STAIRCASES
Starla S T A I R L I F T STRAIGHT STAIRCASES 600,000 people worldwide have chosen a Stannah stairlift to help them keep their independence Stannah. Your first step to freedom Life is better when you have
More informationISO 2320 INTERNATIONAL STANDARD. Prevailing torque type steel nuts Mechanical and performance properties
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 2320 Fourth edition 2008-11-01 Prevailing torque type steel nuts Mechanical and performance properties Écrous autofreinés en acier Caractéristiques
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationEndodontic Handpiece (GT) USER MANUAL
Endodontic Handpiece (GT) USER MANUAL 1 USER MANUAL Read Instruction Before Use SECTION 1: General Introduction Cordless Endo Motor GT3 is a kind of endodontic micromotor to operate NI-Ti files, and it
More informationISO INTERNATIONAL STANDARD. Wheelchairs Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
INTERNATIONAL STANDARD ISO 7176-10 Second edition 2008-11-01 Wheelchairs Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs Fauteuils roulants Partie 10: Détermination
More informationISO 3679 INTERNATIONAL STANDARD. Determination of flash point Rapid equilibrium closed cup method
INTERNATIONAL STANDARD ISO 3679 Third edition 2004-04-01 Determination of flash point Rapid equilibrium closed cup method Détermination du point d'éclair Méthode rapide à l'équilibre en vase clos Reference
More informationRobo Trex Automation System
Robo Trex Automation System grip the future Automatically more efficiency The necessity of automated manufacturing Increasing competition, cost pressures and skills shortages are challenges which have
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15623 First edition 2002-10-01 Transport information and control systems Forward vehicle collision warning systems Performance requirements and test procedures Systèmes de commande
More informationISO 4928 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4928 Third edition 2006-07-15 Road vehicles Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10542-4 First edition 2004-09-15 Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 4: Clamp-type tiedown systems
More informationServo-pneumatic drive solution for welding guns. Top quality welding!
Servo-pneumatic drive solution for welding guns Sturdy and precise! Top quality welding! Highlights Extremely short cycle times High quality and outstanding reproducibility of the spot welds Excellent
More informationHARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
More informationZAP * & KBA Reverse Acting Rupture Discs
ZAP * & KBA Reverse Acting Rupture Discs 3-2220-3 ZAP and KBA Rupture Discs The ZAP and KBA reverse acting rupture discs utilize knife blades to open the rupture discs as reversal occurs. The rupture discs
More informationRectangular Door L-VAT with pneumatic actuator double acting
Rectangular Door L-VAT with pneumatic actuator double acting This manual is valid for the products: 0 7 5 1 0 U A 2 4 0 0 0 1 4 character option code Size 10... 46 x 236 12... 50 x 336 Actuator 24... without
More informationSwitch to the right partner. Kendrion s magnetic actuators
Switch to the right partner Kendrion s magnetic actuators Kendrion - Industrial Magnetic Systems We specialize in the design and manufacturing of electromagnetic solutions such as solenoids, solenoid valves,
More informationJDDZ.E Cartridge Fuses, Nonrenewable. Cartridge Fuses, Nonrenewable
Seite 1 von 6 Page Bottom JDDZ.E258218 Cartridge Fuses, Nonrenewable Cartridge Fuses, Nonrenewable See General Information for Cartridge Fuses, Nonrenewable SIEMENS AG I BT LV POSTFACH 10 09 53 93009 REGENSBURG,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1206 Third edition 2001-11-15 Rolling bearings Needle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances Roulements Roulements à aiguilles, séries
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13988 First edition 2008-08-01 Passenger vehicle wheels Clip balance weight and rim flange nomenclature, test procedures and performance requirements Roues pour véhicules particuliers
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationISO 8847 INTERNATIONAL STANDARD. Small craft Steering gear Cable and pulley systems. Petits navires Appareils à gouverner Systèmes à drosses et réas
INTERNATIONAL STANDARD ISO 8847 Second edition 2004-05-01 Small craft Steering gear Cable and pulley systems Petits navires Appareils à gouverner Systèmes à drosses et réas Reference number ISO 8847:2004(E)
More information