Clearwater D.94 Tech - Phone: Fax: Web: -
|
|
|
- Clifton Richardson
- 6 years ago
- Views:
Transcription
1 Modular design This mini-terminal family in tension clamp technology can be used to assemble individual blocks with 2- and 4-pole terminals. There are three different marking options for quick and clear identification of each terminal. n individual colour scheme for individual connection groups allows visual differentiation between different circuits. With a structural width of only 5 mm (2 connections) or 10 mm (4 connections), the TOP connection system guarantees clearly organised wiring of circuits, even in terminal boxes with restricted space. Made of Weidmüller s top quality WEMI insulation, all block terminals comply with requirements for a 0 flammability class to UL94. Middle terminal for mounting rail TS 15 End plate Individual blocks are put together from middle terminals and an end plate for the open side. Screw fastening involves the first middle terminal and the end plate being replaced by end terminals for fastening purposes. With the other fastening variations, middle terminals with means of fastening are integrated within the block or a mounting foot (MOFU) is used for fitting to the mounting rail. End terminal Middle terminals for direct mounting End terminal Clearwater.94 Tech - Phone: Fax: Web: info@clrwtr.com
2 ... with 4 different means of fastening irect mounting with screw fastening on mounting plate ZUB M The fastening terminals on the right and left of the terminal block are mounted using M3 screws. Central fastening is not possible in this case. Clip-on fastening on mounting plates rilling plan: ZUB/2.5-2/2N ZUB RC The terminals are simply clipped onto mounting plates mm thick with the clips in the 3.5 mm holes. The open side of the terminal is closed by an end plate. 3 5,15 ZUB 2.5-2/4N Fitting on mounting rail TS 15 For clipping on mounting rail TS 15. The open side of the terminal is closed by an end plate. 8 10,25 ZPEB TS 15 Mounting foot for mounting rail TS 15/35 MOFU TS 15/35 The mounting foot can be used for clipping terminal blocks consisting only of middle terminals either to TS 15 or TS 35 mounting rails.
3 ZUB 2.5-2/2N/RC 2.5 ZUB 2.5-2/4N/RC Four connections 2.5 /Length/Height mm 5.1 x 33.2 x x 33.5 x 29 max. current / max. cond. cross-section / pprovals k/- Snap-on clip Snap-on clip ZUB 2.5-2/2N/RC ZUB 2.5-2/4N/RC ZUB 2.5-2/2N/RC BL ZUB 2.5-2/4N/RC BL yellow Wemid ZUB 2.5-2/2N/RC GE ZUB 2.5-2/4N/RC GE iameter of mounting hole for locating clip is 3.5 mm for sheet thickness mm. iameter of mounting hole for locating clip is 3.5 mm for sheet thickness mm. ZP ZUB 5 mm ZP ZUB 5 mm ZP ZUB BL 5 mm ZP ZUB BL 5 mm ZP ZUB OR 5 mm ZP ZUB OR 5 mm
4 ZUB 2.5-2/2N/M 2.5 ZUB 2.5-2/4N/M Four connections 2.5 /Length/Height mm 5.1 x 33.5 x x 33.5 x 24 max. current / max. cond. cross-section / pprovals k/- irect mounting irect mounting ZUB 2.5-2/2N/M ZUB 2.5-2/4N/M ZUB 2.5-2/2N/M BL ZUB 2.5-2/4N/M BL yellow Wemid ZUB 2.5-2/2N/M GE ZUB 2.5-2/4N/M GE End terminals ZUB 2.5-2/2N/B ZUB 2.5-2/4N/B ZUB 2.5-2/2N/B BL ZUB 2.5-2/4N/B BL yellow Wemid ZUB 2.5-2/2N/B GE ZUB 2.5-2/4N/B GE ZP ZUB 5 mm ZP ZUB 5 mm ZP ZUB BL 5 mm ZP ZUB BL 5 mm ZP ZUB OR 5 mm ZP ZUB OR 5 mm Mounting blocks ZBB ZUB 5.1 mm ZBB ZUB 5.1 mm Mounting foot for TS15 & TS35 MOFU 15/35 ZUB 5 mm MOFU 15/35 ZUB 5 mm
5 ZUB 2.5-2/2N/TS ZUB 2.5-2/4N/TS15 Four connections 2.5 /Length/height with TS15x7.5 max. current / max. cond. cross-section mm / 5.1 x 33.5 x x 33.5 x 32 pprovals k/- TS 15 - block design TS 15 - block design green/yellow Wemid ZUB 2.5-2/2N/ ZUB 2.5-2/2N/15 BL ZUB 2.5-2/4N/ ZUB 2.5-2/4N/15 BL End bracket 3-pole 4-pole 10-pole 50-pole ZP ZUB 5 mm ZP ZUB BL 5 mm ZP ZUB OR 5 mm ZP ZUB 5 mm ZP ZUB BL 5 mm ZP ZUB OR 5 mm Clearwater.98 Tech - Phone: Fax: Web: info@clrwtr.com
6 ZPEB ZU ZPE x 33.5 x 32 / 4 PE 5.1 x 35 x x 35 x 30.5 / 4 PE IEC r { # / 3 KEM 97TEX4678 U IEC / 3 r # a KEM 97TEX4678 U TS 15 - block design ZPEB ZU ZU BL ZPE ZP ZUB 5 mm ZQ 2.5N/2 GE ZQ 2.5N/3 GE ZQ 2.5N/4 GE ZQ 2.5N/10 GE ZQ 2.5N/50 GE ZP/TW ZU 1.5 mm ZP/TW ZU BL 1.5 mm ZP/TW ZU OR 1.5 mm ZP/TW ZU 1.5 mm
7 ZU 2.5-2N 2.5 ZPE 2.5-2N 2.5 /Length/height with TS15x7.5 mm max. current / max. cond. cross-section / 5.1 x 42.5 x x 42.5 x 34.7 / 4 PE IEC pprovals k/- IEC UL CS WG WG r { # IEC UL CS 2.5 WG WG { # ZU 2.5-2N ZU 2.5-2N BL green/yellow Wemid ZPE 2.5-2N ZQ 2.5N/2 GE pole ZQ 2.5N/3 GE pole ZQ 2.5N/4 GE pole ZQ 2.5N/10 GE pole ZQ 2.5N/50 GE ZP/TW ZU2.5-2N 2.5 mm ZP/TW ZU2.5-2N 2.5 mm ZP/TW ZU2.5-2N BL 2.5 mm ZP/TW ZU2.5-2N BL 2.5 mm ZP/TW ZU2.5-2N OR 2.5 mm End bracket Clearwater.100 Tech - Phone: Fax: Web: info@clrwtr.com
Clearwater Tech - Phone: Fax: Web: -
Feed-through terminal Disconnect-test terminal KZ 1.5 Feed-through terminal 1.5 KZ 2.5 Feed-through terminal 2.5 /Length/height with TS35x7.5 / 5.1 x 24.8 x 25 24 / 2.5 0.21...2.5 5.1 x 25.5 x 26.5 32
MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
Terminal blocks with clamping yoke and screw connection system
Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with
Data sheet. W-Series WDU 4 SL/EN
At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations
Stud terminals. Overview Stud terminals WF / WFF. Stud terminals
Overview WF / WFF Power transmission Weidmüller s extensive range of stud terminals offers secure connections for all applications which entail a transmission of energy. The connection range extends from
Datasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
Contents. SAK-Series combination foot TS 35 + TS 32. SAK-Series combination foot TS 35 + TS 32 C.1
ontents / P.2 Stud terminals.6 Fuse terminals / P.7 Earth conductor isolating terminals.8.1 / P SK 2.5/EN 2.5 SK 4/EN 4 /Length/height with TS35x7.5 / k/- Gauge to IE 60947-1 / UL94 Flaability class pprovals
Data sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
Data sheet... W terminal earth terminal WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type
NEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
8WH6 ipo Plug-In Terminals
/ Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support
Extra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series
Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.
Industrial Enclosures
1414 N4 Series JIC Enclosures - NEMA 12, 13, 4 Clamped, Lift Off Cover Industrial Enclosures Application Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical
Powermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
OMNIMATE Power PCB terminals
Contents OMNIMTE ower OMNIMTE ower OMNIMTE ower Clamping yoke screw connection Explanation.2 Quick selection.4 roduct selection dimension 6.35.6 dimension 10.16.8 dimension 12.70.11 dimension 15.00.12.1
Stud connection system HSK
CONTA-CONNECT system HSK The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications. Depending on the conductor cross-section, stud terminals
8WH6 ipo Installation Terminals
/2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More
Terminal blocks with Push In connection technology. Product Information
Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a
8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
CONTA-CONNECT SUPPLEMENTS
CONTA-CONNECT SUPPLEMENTS CONTA-CONNECT system HSKG High-power stud terminals HSKG The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications.
ZS4-PE Screw Clamp Terminal Blocks Ground
Technical Datasheet SNK600D00 Catalogue Page ZS4-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: - Rail
Datasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
HT-Series Feed-Through Terminals Screw clamp connection Material:P66 Rail mount on TS32/TS35 or direct mounting Q ty.p.pck(g/pcs) HT /200 HT-4
om/shop 益 NHD INDUSTRIL CO., LTD. 成 CTLOGUE 自 Page 1 HT-Series 動 Page 2 HT-E Earth Through Terminals and Fuse Terminals 控 Page 3 HTP-4 and Double Deck 制 Page 4 NHT-Series for TS-35 行 Page 7 ~ 10 ccessory
NB1 Miniature Circuit Breaker
P-00 Modular DIN Rail Products MCB NB Miniature Circuit Breaker Color coded contact position indicator provides visual indication of the device status and insulation function Magnetic trip elements provide
8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
Limit switches. Metal. Limit Switches Metal casing, 30mm, 40mm & 60mm
Limit Switches casing, 3mm, 4mm & 6mm Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 3 dimensions: LS3M, 3mm width. LS4M, 4mm width.
Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals
Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
Fieldbus components. Fieldbus components Profibus Overview J.2 - J.5. Profibus-DP Industry 1-way distributor, Terminator J.6
Profibus Overview.2 -.5 Profibus-DP Industry 1-way distributor, Terminator.6 Profibus-P Industry 1-, 2-, 4,- 8-way distributor.7 -.8 With overvoltage protection.9 -.11 Profibus P-TEX Overview.12 1-, 2-,
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
The modular structure makes it possible to build at least 5 configurations for each visual lens unit
180 SERIES Modular visual and audible indicators A simple bayonet system simplifies the mounting and maintenance, which can be performed in complete safety The wiring unit can be easily reached and extracted,
IVS Distribution System. IVS - Table of Contents
IVS - Table of Contents Overview System characteristics IVS System description Sheet steel wall-mounted DB for residential & functional buildings - IP30 Sheet steel wall-mounted DB for industrial applications
Operating Instructions in accordance with IECEx Scheme rules, IECEx 02 polykom
Operating Instructions in accordance with IECEx Scheme rules, IECEx 02 polykom Page 1 of 9 Rev. A / 2008-06-18 Product group: Empty enclosure polykom Terminal enclosures polykom The basic safety and health
CONTA-CONNECT. Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5
CONTA-CONNECT Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5 With a width of just 5 mm, the new ZRKD series is available in thirteen versions and connects with stranded
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
42.4. Terminal Blocks, Fuse Blocks and Fuse Holders. For Immediate Delivery or Tech Support call KMParts.com at (866)
.4 Terminal Blocks, Contents Description C383 Series Disconnect Fuse Holders...... C350 Series Fuse Blocks and W Series Fuse Holders.................. Page V7-T-129 V7-T-131 Overview Product Description
FLAP/ FLAP GRANDE DESIGN: ALBERTO AND FRANCESCO MEDA
panels use patented Snowsound technology to visually and acoustically enhance interior spaces. Designers can configure the uniquely shaped panels in artistic wall or ceiling patterns. Polyester internal
Power distribution components
Industrial electronics Power distribution components Reliable, cost-effective, complete R England sv_001.fm Rittal power distribution components Bar centre distance (mm) Number of poles Busbar dimensions
Electronic Circuit Breaker ESS20
Electronic Circuit Breaker ESS20 Description Electronic circuit breaker type ESS20 is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 24 V switch-mode
DC (on) LED Signal. Multiple output connector for easy wiring
DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage
ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
25.4. Molded Case Circuit Breakers. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
.4 Molded Case Circuit Breakers Gi-, Fi, Ji-, Ki-, Li-Frames Molded Case Circuit Breaker Family Molded Case Circuit Breakers When higher interrupting ratings are not required. Product Overview Gi-, Fi,
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
onlinecomponents.com Terminal Blocks Frequently Asked Questions Terminal Blocks
Terminal Blocks Terminal Blocks Frequently Asked Questions Why use terminal blocks to connect instrumentation devices to the control unit? Instrumentation is used throughout a process plant. Long distances
SCREW-TYPE DISTRIBUTION BLOCKS
SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space
Energy Supply Systems
Energy Supply Systems MULTIPOLE CONDUCTOR RAIL 831 10-125 amps KAT0831-0001b-E 13 pole multipole conductor rail in 33 package distribution centres of the postal service (Post AG) 9 pole multipole conductor
Clearwater Tech - Phone: Fax: Web: -
Accessories Bus cables PROFIBUS-PA cables Straight version PROFIBUS-PA Ex i cables Straight version TM-I marker sleeve TM-I marker sleeve Designation Type Order No. Industrial zone PROFIBUS-PA cable One
Technical Information
5 11 10 1 8 1 19 1 10 1 4 1 1 1 5 8 1 14 High Efficiency 1 1 19 14 15 1 18A 18B 4 0 18B 18A 1 MODEL B81-8100 (Basic SINGLE REDUCTION BASIC SINGLE REDUCTION UNIT (B-STYLE) ITEM # DESCRIPTION 1 HOUSING PIPE
Connecting sets CS-FS CS-FS123-WD. Connecting space covers OD-FS00-.. OD-FS123-KP. Adapter for parallel outlet - HP-SE/K
Varius SUMMARY OF MODELS OF FUSE-RAILS Type FSR00 FSR1 FSR2 FSR3 Rated operating current I e 160 A 250 A 400 A 630 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V Size 00 1 2 3 Busbar spacing
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
TEFC FARM DUTY/AGRICULTURE 115, 208 & 230 VOLTS 1-PHASE
TEFC FARM DUTY/AGRICULTURE 115, 208 & 230 VOLTS 1-PHASE FOOT MOUNT overload protection 1/3 to 10 HP Two designs to choose from: High Torque (HT) and Extra High Torque (EHT) construction and shaft slingers
X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks
X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks 2 Contents X-COM -SYSTEM 04 Installation 07 X-COM -SYSTEM at a Glance 08 X-COM S-SYSTEM 12 Installation 14 X-COM S-SYSTEM at a Glance 16
General purpose relays 7-10 A
55 SЕRIES General purpose relays 7-10 utomation for blinds, grilles and shutters Control and management of electric power Shipyards Road / tunnel lighting Hoists and cranes Circuit breakers and switches
Switches for PV applications Switch-disconnectors OTDC, OT and OTDCP
Breakers and Switches Switches for PV applications Switch-disconnectors OTDC, OT and OTDCP Switch-disconnectors OTDC16...250, OT315...630 and OTDCP16...32 Contents 4 Product overview 8 Technical data
HS5D Miniature Interlock Switches
HS5D Miniature Interlock Switches Head Removal Detection Function for Safer Performance Clearwater Tech - Phone: 8094.04 - Fax: 8.368.04 - Web: www.clrwtr.com - Email: info@clrwtr.com New Generation Miniature
S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en
Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break
Versatile Power Entry Module with Small Footprint. PS non-filtered
Catalog: 1651 Issue Date: 6.11 Versatile Power Entry Module with Small Footprint UL Recognized CSA Certified VDE Approved PE filtered PS non-filtered PS filtered The P series CHAMELEON power entry module
Fuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
60 Series - General purpose relays 6-10 A. Features SERIES
60 Series - General purpose relays 6-10 60 SERIES Features 60.12 60.13 Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils
ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks
ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks The Þelds of application for the pluggable ST-COMBI spring-cage terminal blocks has been added to with solutions for larger conductor cross sections
Multipole Conductor Rail MultiLine Program 0831
Multipole Conductor Rail MultiLine Program 0831 Contents Description / Technical Data Description....2 Technical Data....3 Conductor Rails Rails complete with pre-mounted Connector...4 Power Feeds....5
Phone: Fax: Web: -
empire SERIES For your largest applications, turn to the Empire Series from Allied Moulded. Fiberglass construction offers durability and strength without the excessive weight of a comparable metal enclosure.
Phone: Fax: Web: -
control series The larger ontrol Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard grey cover is available with or without a full-length
fasis WTP DIN rail terminal blocks with push-in connection
110 fasis fasis WTP DIN rail terminal blocks with push-in connection Terminate wires easily, directly and without tools! fasis WTP DIN rail terminal blocks with push-in connection. Built according to an
ADVANCE GRP Series 125A Switched Interlocked socket outlets
DVNCE GRP Series 125 Switched Interlocked socket outlets DVNCE GRP Series 125 > SWITCHED INTERLOCKED SOCKET OUTLETS > REFERENCE STNDRDS EN 60309-1 Plugs, socket outlets and couples for industrial purposes.
Rotary Cam Switches. Rotary Cam Switches
es Series es... 2 Assemblies... 11 s... 15 Accessories... 25 Technical Information... 26 Dimensions... 31 Series R-Line es... 34 s... 39 Accessories... 40 Technical Information... 41 Dimensions... 42 es
S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en
2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive
FOOT SWITCHES
- 83 - FOOT SWITCHES PS... / PD... Foot Switches Double insulation - Plastic Casing IP65 Description Applications Foot switch operated machines such as: shearing machines, spinning machines, spinning lathers,
MS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
ZP2.5-PE Spring Terminal Block Ground
Technical Datasheet 1SNK162002D0201.indd 08/06/11 ZP2.5-PE Spring Terminal Block Ground Catalogue Page Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail
selos Wieland jumpering system Perfect technology Copper Steel Wieland marking system Reliable identification Perfect technology Extremely rugged!
selos Wieland jumpering system Perfect technology Steel Copper Perfect technology Copper current bar guarantees low contact resistance Steel spring guarantees strength, durability, and long-term stability
Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.
Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover
Content Modular terminals for high-temperature applications Nuclear power terminal blocks erminal Blocks T D.1
Content Modular terminals for high-temperature applications TS 32 / Ceramic.2 -.3 Nuclear power terminal blocks Overview.4 -.5.6 -.10 Terminal Blocks.1 Modular terminals for high-temperature applications
Castellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
General purpose relays 6-10 A
60 SЕRIES General purpose relays 6-10 Shipyards Hoists and cranes Road / tunnel lighting Burners, boilers and furnaces Wood-processing machines Panels for electrical distribution Control panels Control
TO ALL OUR CUSTOMERS. Poles
Page 1 TO ALL OUR CUSTOMERS 1. NEWS: NEW 20-32-40A THERMOPLASTIC ENCLOSURES FOR THE ISOLATORS SERIES The thermoplastic ISOLATORS series offer has been expanded, introducing a range of products for 20,
Command, control and regulation
186 CONTROL SYSTEMS Command, control and regulation Mechanical regulators... 188 NO-NC thermostats... 191 Twin thermostats... 192 Change-over thermostats... 193 Hygrostats... 194 Flashing signal device...
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Signal lamps RS, RSB A20. Technical data RS, RSB. Dimensional drawing of RS, RSB. Number of poles Rated voltage Un
Signal lamps S, S echnical data S, S Standards Number of poles ated voltage Un Light source Light source capacity Colours W Illumination erminal capacity Mounting mm2 Degree of protection mbient air temperature
Miniature Industrial relay 8-16 A
46 SЕRIES Miniature Industrial relay 8-16 utomation for blinds, grilles and shutters Elevators and lifts Shipyards Road / tunnel lighting Hoists and cranes Bottling plant Control panels Panels for electrical
Not affected by drops, bubbles or froth
PARTICULAR USE SENSORS SERIES Sensor Detects water...reliably! Strong penetration power Not affected by drops, bubbles or froth Conforming to EMC Directive UL Recognition (Excluding m cable length type)
System pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
Pilot devices. General construction
Modular range 30mm Modular Range, 30mm Pilot devices General construction Snap-on features reduce installation time Bezels: black plastic or chrome metal Contact block holder features rear mounting with
Rated voltage (V) Current (A) Stranded wire. Solid wire A.D.O. (AWG)
Characteristics (1) Dimensions are on DIN 3 rail : PR4 (Height 15 mm) Use of a PR3 rail : remove 7,5 mm on dimension B Use of a DIN 1 rail : remove 2,5 mm on dimension B remove 5 mm on dimension C Miniblocks
CrossBoard TECHNOLOGY. CrossBoard
CrossBoard 125 A 1 CrossBoard TECHNOLOGY CrossBoard CrossBoard 125 A 1 CrossBoard the new basic system Tool-free mounting combined with high safety due to the integrated touch-safe protection make CrossBoard
Standard Buccaneer IP68 BUCCANEER FOR POWER BUCCANEER POWER
IP68 Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding Contact Insert Sealing Cap Clip
A real all-rounder Flexible control of both direct and alternating currents The innovative S 200 M UC
A real all-rounder Flexible control of both direct and alternating currents The innovative S 200 M UC Top performance and great flexibility in a single device The new S 200 M UC for AC and DC applications
1 Product Description System Layout Safety Instructions Intended Use Installation... 3
Order Number 0812xx- Contents 1 Product Description... 2 2 System Layout... 2 3 Safety Instructions... 3 4 Intended Use... 3 5 Installation... 3 5.1 Hanger Clamp... 3 5.2 Cutting of Conductor Rail... 4
Products for. Section
2 Products for Section Chemical Industries Grain silos Oil and Gas industry Plastics Fertilisers and insecticides Wood Cosmetics and perfumes lcohol and spirits Pharmaceutical Industries, etc. 90 2005-2006
Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories
Manual motor protectors Manual motor protectors Manual motor Protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certified
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
Miniature Relay PT 2 pole 12 A, 3 pole 10 A or 4 pole 6 A DC- or AC-coil
2, 3 or 4 C/O contacts Switching performance up to 3000 VA Relay height 29 mm Cadmium-free contact material Mechanical indicator Manual test tab, optionally lockable. White marking tabs Applications Universal