QUICK REFERENCE TABLE FOR SWITCHING RECTIFIERS QUICK REFERENCE TABLE FOR SILICON RECTIFIERS QUICK REFERENCE TABLE FOR GLASS PASSIVATED RECTIFIERS
|
|
|
- Frederick Murphy
- 6 years ago
- Views:
Transcription
1 QUICK REFERENCE TABLE FOR SWITCHING RECTIFIERS QUICK REFERENCE TABLE FOR SILICON RECTIFIERS QUICK REFERENCE TABLE FOR GLASS PASSIVATED RECTIFIERS QUICK REFERENCE TABLE FOR BRIDGE RECTIFIERS HIGH RELLIABILITY EXPERIMENT LIST SCHOTTKY BARRIER RECTIFIERS SOFT RECOVERY/FAST SWITCHING RECTIFIERS GLASS PASIVATED RECTIFIERS [20/02/ :43:36]
2 QUICK REFERENCE TABLE FOR SILICON RECTIFIERS SCHOTTKY BARRIER RECTIFIERS CASE PAGE 1N5817 1N5818-1N DO SR102 SR103 - SR104 - SR105 SR106 SR108 DO N5820 1N5821-1N DO SR302 SR303 - SR304 - SR305 SR306 SR308 DO SR502 SR503 - SR504 - SR505 SR506 SR508 DO SR820 SR830 SR8 SR840 SR845 SR850 SR860 SR880 TO-220A SR1020 SR1030 SR10 SR1040 SR1045 SR1050 SR TO-220A SR1620 SR1630 SR16 SR1640 SR1645 SR1650 SR TO SR3020 SR3030 SR30 SR3040 SR3045 SR3050 SR TO-3P SR5020 SR5030 SR50 SR5040 SR5045 SR TO-3P 12 SUPER FAST RECTIFIERS CASE PAGE SF11 SF12 SF13 SF14 SF15 SF16 DO SF21 SF22 SF23 SF24 SF SF26 DO SF31 SF32 SF33 SF34 SF SF36 DO SF51 SF52 SF53 SF54 SF55 SF56 DO SF81 SF82 SF83 SF84 SF85 SF86 TO-220A SF161 SF162 SF163 SF164 SF165 SF166 TO SF301 SF302 SF303 SF TO-3P 14 ULTRA FAST RECTIFIERS CASE PAGE UF1 UF2 UF3 - UF4 - - DO UF5 UF5401 UF UF DO HITRA FAST RECTIFIERS CASE PAGE HER101 HER102 HER103 HER104 HER105 HER106 HER107 DO (1 of 3) [20/02/ :44:07]
3 CASE PAGE 0.1 PR1000 PR1200 PR1 PR1600 DO FAST SWITCHING DIODE CASE PAGE N4151 1N DO- 20 [Back] (3 of 3) [20/02/ :44:07]
4 mic4 QUICK REFERENCE TABLE FOR SILICON RECTIFIERS SILCON RECTIFERS CASE PAGE 1A1 1A2 1A3 1A4 1A5 1A6 1A7 R-1 22 RL101 RL102 RL103 RL104 RL105 RL106 RL107 A N1 1N2 1N3 1N4 1N5 1N6 1N7 DO N5391 1N5392 1N5393 1N5395 1N5397 1N5398 1N5399 DO RL151 RL152 RL153 RL154 RL155 RL156 RL157 DO RL201 RL202 RL203 RL204 RL205 RL206 RL207 DO RL1 RL2 RL3 RL4 RL5 RL6 RL7 R N5 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 DO BY1 BY2 BY3 BY4 - DO A05 6A1 6A2 6A4 6A6 6A8 6A10 R P6OOA P600B P600D P600G P600J P600K P600M R-6 23 HIGH VOL TAGE RECTIFIERS (1) CASE PAGE - - BY127 BY133 - EM513 EM516 DO A A9 - - R BY DO HIGH VOLTAGE RECTIFIERS(2) CASE PAGE R2000 R00 R3000 R0 R5000 DO-41/DO R2000F R00F R3000F R0F R5000F DO-41/DO R1200 R1500 R DO R1200F R1500F R1800F DO HIGH VOL TAGE RECTIFIERS(3) 5KV 8KV 10KV 12KV 14KV 15KV 16KV CASE PAGE 0. HVM5 HVM8 HVM10 HVM12 HVM14 HVM15 - HVM HV5 HV8 HV10 HV12 HV14 HV15 - HV HC5 HC8 HC10 HC12 - HC15 - HC HVP5 HVP8 HVP10 HVP12 HVP14 HVP15 HVP16 HVP 31 (1 of 2) [20/02/ :44:22]
5 1.5 HER151 HER152 HER153 HER154 HER155 HER156 HER157 DO HER1 HER2 HER3 HER4 HER5 HER6 HER7 R HER301 HER302 HER303 HER304 HER305 HER306 HER307 DO HER601 HER602 HER603 HER604 HER R HER801 HER802 HER803 HER804 HER TO-220A HER1601 HER1602 HER1603 HER1604 HER TO HER3001 HER3002 HER3003 HER3004 HER TO-3P 17 FAST RECOVERY RECTIFIERS CASE PAGE 1F1 1F2 1F3 1F4 1F5 1F6 1F7 R-1 18 RL101F RL102F RL103F RL104F RL105F RL106F RL107F A FR101 FR102 FR103 FR104 FR105 FR106 FR107 DO BA157 BA158 - BA159 DO N4933 1N4934 1N49 1N4936 1N DO N4942 1N4944 1N4946 1N4947 1N4948 DO FR151 FR152 FR153 FR154 FR155 FR156 FR157 DO FR151 FR152 FR153 FR154 FR155 FR156 FR157 DO FR201 FR202 FR203 FR204 FR205 FR206 FR207 DO BY296 BY297 BY298 - BY299 - DO FR1 FR2 FR3 FR4 FR5 FR6 FR7 R FR301 FR302 FR303 FR304 FR305 FR306 FR307 DO BY396 BY397 BY398 - BY399 - DO FR601 FR602 FR603 FR604 FR605 FR606 FR607 R FR601 FR602 FR603 FR604 FR605 FR606 FR607 R FR801 FR802 FR803 FR804 FR805 FR806 - TO-220A 20 SOFT RECOVERY/FAST SWITCHING RECTIFIERS CASE PAGE SFR101 SFR102 SFR103 SFR104 SFR105 SFR106 DO SFR301 SFR302 SFR303 SFR304 SFR305 SFR306 DO SFR501 SFR502 SFR503 SFR504 SFR505 SFR506 R SFR601 SFR602 SFR603 SFR604 SFR605 SFR606 R-6 21 PHOTOFLASH RECTIFIERS (2 of 3) [20/02/ :44:07]
6 mic4 AUTOMOBILE RECTIFIERS CASE PAGE 6.0 RL750 RL751 RL752 RL754 RL RA-L 29 RA05 RA1 RA2 RA4 RA6 RA8 RA10 RA 29 RA05 RA1 RA2 RA4 RA6 RA8 RA10 RA 29 [Back] (2 of 2) [20/02/ :44:22]
7 MIC7.HTM QUICK REFERENCE TABLE FOR GLASS PASSIVATED RECTIFIERS GLASS PASSIVATED RECTIFIERS CASE PAGE 1G1 1G2 1G3 1G4 1G5 1G6 1G7 R-1 26 RL101G RL102G RL103G RL104G RL105G RL106G RL107G A N1G 1N2G 1N3G 1N4G 1N5G 1N6G 1N7G DO RL151G RL152G RL153G RL154G RL155G RL156G RL157G DO N5391G 1N5392G 1N5393G 1N5394G 1N5395G 1N5396G 1N5397G DO RL201G RL202G RL203G RL204G RL205G RL206G RL207G DO N5G 1N5401G 1N5402G 1N5404G 1N5406G 1N5407G 1N5408G DO A05G 6A1G 6A2G 6A4G 6A6G 6A8G 6A10G R-6 27 FAST RECOVERY GALASS PASSIVATED RECTIFIERS CASE PAGE RL101FG RL102FG RL103FG RL104FG RL105FG RL106FG RL107FG A FR101G FR102G FR103G FR104G FR105G FR106G FR107G DO N4933G 1N4934G 1N49G 1N4936G 1N4937G - - DO N4942G 1N4944G 1N4946G 1N4947G 1N4948G DO FR151G FR152G FR153G FR154G FR155G FR156G FR157G DO FR201G FR202G FR203G FR204G FR205G FR206G FR207G DO FR301G FR302G FR303G FR304G FR305G FR306G FR307G DO FR601G FR602G FR603G FR604G FR605G FR606G FR607G R-6 SURFACE MOUNT DEVICES-RECTIFIERS CASE PAGE G1 G2 G3 G4 G5 G6 G7 SM-A 28 F1 F2 F3 F4 F5 F6 F7 SM-A 28 [Back] [20/02/ :45:20]
8 MIC9.HTM HIGH REL IABILITY EXPERIMENT LIST NO.EXPERIMENT ITEM 1.SOLDERABILTY 2.PULL TEST 3.BEND TEST 4.HIGH TEMPERATURE REVERSE BLAS 5.FORWARD OPERATION LIFE 6.INTERMITENT OPERATION LIFE EXPERIMENT METHOD AND CONDITIONS 230 C ± 5 C/5 SEC 1KGIN AXIAL LEAD DIRECTION/10 SEC. 0.5KG WEIGHT APPLIED TO EACH LEAD FOR THREE TIMES 90 ± 5 ARCS Ta=120 C/1000HRS/Vr=80% RATED Vr Ta= C RATED AVERAGE RECTIFIED CURRENT/500HRS. (1)ON:5MIN Tj=1 C-175 C WITH RATED Irms POWER (2)OFF:5MIN Tj=Ta+15 C WITH COOL FORCED AIR (3)1000 CYCLES 7.PRESSURE COOKER 15 PSIG,TA=121 C,4 HRS - 8.TEMPERATURE CYCLING 9.THERMAL SHOCK 10.FORWARD-SURGE 11.HUMIDITY TEST 12.HIGH TEMPERATURE STOREAE LIFE 13.SOLDER RESISTANCE 14.SOLVENT RESISTANCE (1)-15 C/+1 C 30 MINUTES FOR SWELLED TIME (2)5MINUTES FOR TRANSFERD TIME (3)10 CYCLES 0 C/5 MIN, 100 C/5MIN, 30 CYCLES 8.3MS SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD ONE SURGE TA=65 C,RH=98%,T=100 HRS 150 C/1000 HRS 260 ± 5 C 10 SEC IMMERSE BODY INTO SOLDER 1/16" ± 1/32' DIP INTO C FOR 1MIN DOCUMENTATION MIL-STD-202F METHOD-208 MIL-STD-750C METHOD-2036 MIL-STD-750C METHOD-2036 MIL-STD-750C METHOD-1026 MIL-STD-750C METHOD-1027 MIL-STD-750C METHOD-1036 MIL-STD-750C METHOD-1051 MIL-STD-750C METHOD-1056 MIL-STD-750C METHOD MIL-STD-202F METHOD-103B MIL-STD-750C METHOD-1031 MIL-STD-750C METHOD-2031 MIL-STD-202F METHOD (1 of 2) [20/02/ :45:57]
9 MIC9.HTM [Back] (2 of 2) [20/02/ :45:57]
10 MIC10.HTM SCHOTTKY BARRIER RECTIFIERS OPERATING TEMPEATURE RANGE 20V to 45V :-55 C to +1 C 50V to 80V :-65 C to +150 C STORAGE TEMPERATURE RANGE:-65 C to +150C AMPERE-SCHOTTKY/DO-41 Average C T A C T A PRV Io@T * L I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk 1N N N SR SR SR SR SR SR T* Lead Fro, Body 3.0 AMPERES-SCHOTTKY/DO-27 Average C T A C T A PRV Io@T L * I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk (1 of 3) [20/02/ :46:27]
11 MIC10.HTM 1N N N SR SR SR SR SR SR T* Lead Fro, Body AMPERES-SCHOTTKY/DO-27 Average C T A C T A PRV Io@T * L I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk SR SR SR SR SR SR T* Lead Fro, Body 8.0 AMPERES-SCHOTTKY/TO-220A (2 of 3) [20/02/ :46:27]
12 MIC10.HTM Average C T A C T A PRV Io@T * L I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk SR * SR * SR8 8.0 * SR * SR * SR * SR * SR * T* Lead Fro, Body NOTES: 1.Suffix "R" for Polarity. 2."*" Case Temperature Tc Measured At Metal Tap. [Back] [Next] (3 of 3) [20/02/ :46:27]
13 MIC19.HTM SOFT RECOVERY/FAST SWITCHING RECTIFIERS OPERATING AND STORAGE TEMPEATURE RANGE:-50 C to +1 C STOTAGE TEMPERATVRE-50 C to +150 C AMPERE SOFT RECOVERY/FAST SWITCHING/DO-41 Average C T A C T A PRV Io@T L * I FM (Surge) I R I FM V FM Trr Maixmum Recovery Time VPK A AV C A PK madc Apk Vpk ns SFR SFR SFR SFR SFR SFR NOTE:Trr lf=0.5a, lr=a, lrr=0.a 3.0 AMPERES SORT RECOVERY/FAST SWITCHING/DO-27 Average C T A C T A PRV Io@T L * I FM (Surge) I R I FM V FM Trr Maixmum Recovery Time VPK A AV C A PK madc Apk Vpk ns SFR (1 of 3) [20/02/ :47:05]
14 MIC19.HTM SFR SFR SFR SFR SFR AMPERES SORT RECOVERY/FAST SWITCHING/R-6 Average C T A C T A PRV Io@T L * I FM (Surge) I R I FM V FM Trr Maixmum Recovery Time VPK A AV C A PK madc Apk Vpk ns SFR SFR SFR SFR SFR SFR AMPERES SORT RECOVERY/FAST SWITCHING/R-6 Average C T A C T A PRV Io@T L * I FM (Surge) I R I FM V FM Trr Maixmum Recovery Time (2 of 3) [20/02/ :47:05]
15 MIC19.HTM VPK A AV C A PK madc Apk Vpk ns SFR SFR SFR SFR SFR SFR [Back] (3 of 3) [20/02/ :47:05]
16 MIC24.HTM GLASS PASSIVATED RECTIFIERS OPERATING AND STORAGE TEMPEATURE-65 C to +175 C AMPERE-GLASS PASSIVTED/R-1 Average C T A C T A PRV Io@T * L I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk 1G G G G G G G AMPERE-GLASS PASSIVTED/A-405 Average C T A C T A PRV Io@T * L I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk RL101G RL102G RL103G RL104G RL105G (1 of 3) [/02/ :14:23]
17 MIC24.HTM RL106G RL107G AMPERE-GLASS PASSIVTED/DO-41 Average C T A C T A PRV Io@T * L I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk 1N1G N2G N3G N4G N5G N6G N7G AMPERE-GLASS PASSIVTED/DO-15 Average C T A C T A PRV Io@T * L I FM (Surge) I R I FM V FM VPK A AV C A PK madc Apk Vpk RL151G RL152G RL153G RL154G (2 of 3) [/02/ :14:23]
18 MIC24.HTM RL155G RL156G RL157G [Next] (3 of 3) [/02/ :14:23]
19 SURFACE MOUNT DEVICES FOR HYBRID APPLICATIONS AUTOMOBILE RECTIFIERS HIGH VOLTAGE RECTIFIERS PHOTOFLASH RECTIFIERS ========================== RADIAL-TAPING SPECIFICATIONS FOR RECTIFIERS AXIAL LEAD TAPING SPECIFICATIONS FOR RECTIFIERS REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES PACKAGING OF DIODES AND BRIDGE RECTIFIERS [21/02/ ::36]
20 MIC26.HTM SURFACE MOUNT DEVICES FOR HYBRID APPLICAIONS OPERATING AND STORAGE TEMPERATURE -55 C to +175 C AMPERE-GLASS PASSIVTED/SM-A G1 G2 G3 G4 G5 G6 G7 Average C T A C T A Recovery Time PRV Io@T L * I FM (Surge) I R I FM V FM Trr VPK A AV C A PK madc Apk Vpk ns AMPERE-FAST RECOVERY-GLASS PASSIVTED/SM-A Average C T A C T A Recovery Time PRV Io@T L * I FM (Surge) I R I FM V FM Trr VPK A AV C A PK madc Apk Vpk ns (1 of 2) [21/02/ :36:21]
21 F1 F2 F3 F4 F5 F6 F [Back] MIC26.HTM (2 of 2) [21/02/ :36:21]
22 Untitled AUTOMOILE RECTIFIERS OPERATING AND STORAGE TEMPERATURE -55 C to +175 C 6.0 AMPERES/ RA-L Average C T A C T A Recovery Time RL750 RL751 RL752 RL754 RL756 PRV Io@T L * I FM (Surge) I R I FM V FM Trr VPK A AV C A PK madc Apk Vpk ns *60 *60 *60 *60 * AMPERES-PLASTIC BUTTON/ RA Average C T A C T A Recovery Time PRV Io@T L * I FM (Surge) I R I FM V FM Trr VPK A AV C A PK madc Apk Vpk ns (1 of 2) [21/02/ :36:33]
23 Untitled RA05 RA1 RA2 RA3 RA4 RA5 RA6 RA8 RA AMPERES-PLASTIC BUTTON/ RA RA05 RA1 RA2 RA3 RA4 RA5 RA6 RA8 RA10 Average C T A C T A Recovery Time PRV Io@T L * I FM (Surge) I R I FM V FM Trr VPK A AV C A PK madc Apk Vpk ns [Back] (2 of 2) [21/02/ :36:33]
24 MIC27.HTM HIGH VOLTAGE RECTIFIERS OPERATING AND STORAGE TEMPEATURE-55 C to +150 C HIGH VOLTAGE/DO-41/DO-15 Average C T A C T A Maixmum Recovery Time PRV Io@T * L I FM (Surge) I R I FM V FM Trr VPK A AV C A PK madc Apk Vpk ns R R R R R R R R HIGH VOLTAGE FAST RECOVERY/DO-41/DO-15 Average C T A C T A PRV Io@T L * I FM (Surge) I R I FM V FM Trr Maixmum Recovery Time VPK A AV C A PK madc Apk Vpk ns R1200F R1500F (1 of 2) [21/02/ :36:59]
25 MIC27.HTM R1800F R2000F R00F R3000F R0F R5000F AMPERE-FAST RECOVERY-GLASS PASSIVED/DO-41 Average C T A C T A PRV Io@T L * I FM (Surge) I R I FM V FM Trr Maixmum Recovery Time VPK A AV C A PK madc Apk Vpk ns HVM HVM HVM HVM HVM HVM [Next] (2 of 2) [21/02/ :36:59]
26 Untitled PHOTOFLASH RECTIFIERS OPERATING AND STORAGE TEMPERATURE: -65 C to C PR1000 PR1200 PR1 PR Average C T A C T A Recovery Time PRV Io@T L * I FM (Surge) I R I FM V FM Trr VPK A AV C A PK madc Apk Vpk ns [Back] [21/02/ :37:20]
27 MIC RADIAL-TAPING SPECIFI- CATIONS FOR RECTIFIERS NOTE: 1.Packaging per EIA/JEDEC Standard RS-468.Available Only for A-405 product 2. cumulative pitch tolerance:2.0mm/10pitch 3.Non-standard Psckaging is available for special order. (1 of 2) [21/02/ :38:19]
28 MIC [Back] (2 of 2) [21/02/ :38:19]
29 MIC36 AXIAL LEAD TAPING SPECI- FICATIONS FOR RECTIFIERS Axial Lead deviced are packer in accordance with EIA standard RS-296-D and specifications given below. (1 of 2) [21/02/ :38:51]
30 MIC36 NOTE: 1.Each component lead shall be sandwiched between tapes for a minimum of 3.2mm(0.126") 2.The reel width 'W'for 26mm taping is 50.0 ± mm(1.97" ± 0.040") [Back] (2 of 2) [21/02/ :38:51]
31 MIC37 REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES NOTE: 1.Devices are packed in accordance with EIA standard RS-481-A and specifications given above. Available only forsm-a devices. 2.Available on 7 inch(1500 ct.)or 13 inch(5000 ct.) diameter reels. (1 of 2) [21/02/ :39:08]
32 MIC37 [Back] (2 of 2) [21/02/ :39:08]
33 Untitled PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE INNER SIZE (m/m) BOX (EA) CARTON SIZE (m/m) CARTON (EA) APPROX.GROSS WEIGHT(kg) A x85x21 1, x210x260 50, R-1 192x85x21 1, x210x260 50, DO x85x21 1, x210x260 50, DO x85x x210x260, R-3 192x85x x210x260, DO x77x x300x270 12, R-6 300x77x x300x270 4, DB-1 490x145x85 2, x365x310 20, B-15/WOM/RC-2 2x185x63 1, x270x4 10,000 RB: 15.2 WOB: 16.2 RC: 18.2 RS-2 200x160x x232x210 7, BR-3 195x195x x205x220 1, RS-4 265x213x50 458x2x278 3, BR-6 195x195x x205x220 1, RS-6 265x213x50 458x2x278 3, RS-8 265x213x50 458x2x278 3, BR-8 2x2x x232x210 1, MB/BR- 195x195x x205x220 MB/BR-W 195x195x x205x220 MB: 14.8 BR:10.4 MBW: 13.6 BRW:9.2 HV 2x2x x205x4 1, HC 207x207x x205x HVP 207x207x x205x TO x155x95 2, x320x220 8, TO-3P 555x155x x320x220 3, (1 of 3) [21/02/ :39:41]
34 Untitled REEL PACK PACKAGE REEL (EA) COMPONENT SPACE (m/m) TAPE SPACE (m/m) REEL DIA (m/m) CARTON SIZE (m/m) CARTON (EA) APPROX. GROSS WEIGHT (KG) A-405 5, x340x340 20, R-1 5, x340x340 20, DO-41 5, x340x340 20, DO-15 4, x340x340 16, R-3 3, x340x340 12, DO-27 1, x340x340 5, R x340x340 2, AMMUNITION PACK PACKAGE BOX (EA) COMPONENT SPACE (m/m) TAPE SPACE (m/m) BOX SIZE (m/m) CARTON SIZE (m/m) CARTON (EA) APPROX GROSS WEIGHT (KG) A-405 2, x75x90 480x260x300 45, R-1 2, x75x90 480x260x300 45, DO-41 2, x75x90 480x260x300 45, DO-15 1, x75x90 480x260x300 27, R-3 1, x75x90 480x260x300 27, DO x75x90 480x260x R-6> x75x90 480x260x300 4, R-1 2, x47x95 320x270x310 45, DO-41 2, x47x95 320x270x310 45, DO-15 1, x47x95 320x270x310 27, (2 of 3) [21/02/ :39:41]
35 Untitled [Back] (3 of 3) [21/02/ :39:41]
SMB. Features. Mechanical Characteristics. Maximum Ta=25 unless otherwise specified. Peak Pulse Power Dissipation by10/1000μs Test Waveform
KLS5-SMBJ Features SMBJ Series *600W peak pulse capability at 0/000μs waveform *IEC 6000-4-2(ESD) 5Kv(air), 8kV(contact) *Quick response to surge voltage *Excellent clamping capability *Typical failure
MBR2040FCT THRU MBR20200FCT. List... Package outline... Features Mechanical data Maximum ratings Electrical characteristics...
List List... Package outline... 1 2 Features... 2 Mechanical data... 2 Maximum ratings... 2 Electrical characteristics... 2 Rating and characteristic curves... 3 Pinning information... 4 Marking... 4 Tube
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
PTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
PTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
NTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
HIGH VOLTAGE FULL WAVE BRIDGE RECTIFIER ASSEMBLY HVFWB SERIES
HIGH VOTAGE FU WAVE BRIDGE RECTIFIER ASSEMBY HVFWB SERIES High Voltage Bridge 0.03 x 0.50 Tab Terminals Typ. High Voltage Bridge 0.03 x 0.50 Tab Terminals Typ. 0.4 0.97 0.3 0.70 0.5 0.5 Inches 0.55 0.55
P-Series 11 to to to to to to to 1100 >1000 <25
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
List... Package outline... Features Mechanical data... Maximum ratings Electrical characteristics... 3
Zener Dide Frmsa MS List List... Package utline... 1 2 Features... 2 Mechanical data... 2 Maximum ratings... 2 Electrical characteristics... 3 Rating and characteristic curves... 4 Pinning infrmatin...
1.0A Low Profile Chip Schottky Rectifier TSCD12WSH-TSCD16WSH. Features. Application. Mechanical Data
1.0A Low Profile Chip Schottky Rectifier 1.0A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Low profile with SMD package Low power loss, High efficiency High current
POLY-FUSE Resettable PTCs Radial Leaded > 250R Series
Radial Leaded > Description The is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms). The series
Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
List... Package outline... Features Mechanical data... Maximum ratings Electrical characteristics... 3
Zener Dide Frmsa MS List List... Package utline... 1 2 Features... 2 Mechanical data... 2 Maximum ratings... 2 Electrical characteristics... 3 Rating and characteristic curves... 4 Pinning infrmatin...
List... Package outline... Features Mechanical data... Maximum ratings Electrical characteristics... 3
List List... Package utline... 1 2 Features... 2 Mechanical data... 2 Maximum ratings... 2 Electrical characteristics... 3 Rating and characteristic curves... 4 Pinning infrmatin... 5 Taping & bulk specificatins
Features. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
Sensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes............................................................ 1 General Information...........................................................................
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
Teccor brand Thyristors Standard Bidirectional SIDACs
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
POLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
NTC Thermistor:TTC05 Series
Features 1. RoHS compliant & Halogen-free series are available 2. Body size Ф5mm 3. Radial lead resin coated 4. -30 ~ +125 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency
Transient Voltage Suppressor
Features 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical IR less then 1μA above 10V RoHS
Engineering Product Specification C310T-SC Series Ceramic tube, Time delay
Engineering Product Specification C310T-SC Series Ceramic tube, Time delay Printed on: 4/14/2015 Page 2 of 14 Technical Specification Approvals Functional Area Engineering Manager Product Manger Signature(s)
Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
No. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
Radial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
E CQC CQC CQC CQC CQC D-Seires. 11 to to to
Description CNR D/V/P/H/N series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
SPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. ide continuous voltage range: 30Vac ~ 465Vac 4. Operating temperature range: -40 C ~ +25 C Storage temperature range: -40 C ~ +50 C
NTC Thermistor:TTC05 Series
Features 1. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating temperature range: -30 ~+125 6. Wide resistance range 7. Cost effective
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt... 12 P6KE Series 600 Watt... 18 1.5KE
MF-R/250 Series - Telecom PTC Resettable Fuses
TV Rheinland Features Radial Leaded Devices High ability to withstand lightning surges Ideal lightning surge coordination device Binned and sorted narrow resistance ranges available Lead free option available
Production Part Approval - Material, Performance Test Results Discrete Semiconductor Component Qualification Plan
電話 :886-2-89-88 XindianDist., New Taipen City, Taiwan, R.O.C. 231 傳真 :886-2-89-88 Tel:886-2-89-88 Fax:886-2-89-88 Customer P/N: SS26 Product Engineer: Reyn Required PPAP Submission Date:8-Mar-12 Supplier
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
PLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
Product Specification
Product Name : AEM Part Number : ES0402V014CT Customer : Customer Revision: 2 Date: 2011-09-08 AEM Components (Suzhou) Co., Ltd 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R China, 215122 TEL: 86-512-6258-0028
Features 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
Gas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
Silvertel. Ag Features. 2. Description. Power-Over-Ethernet Module for CCTV. IEEE802.3af compliant
Silvertel V2.4 August 202 Datasheet Pb. Features IEEE802.3af compliant Standard CCTV package sizes - 38mm x 38mm x 6mm (H) or 42mm x 42mm x 6mm (H) Low cost Input voltage range 36V to 57V Input diode bridges
Radial Leaded > 16R Series. Description. Features. Applications. Additional Information. Datasheet. Maximum Time To Trip Current (A) P d typ.
16R Series RoHS Description Littelfuse 16R Series Radial Leaded PTCs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and
Features. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
FDRW40C120J(1200V, 40A)
FDRW40C20J(200V, 40A) Soft Recovery FRD Series Maximum Rating and Characteristics Maximum Ratings (at Ta=25 C unless otherwise specified.) Item Symbol Conditions Ratings Units Repetitive peak reverse voltage
MS868C10. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode
MS868C Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak surge reverse voltage VRSM
Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM V Isolating voltage Viso Terminals-to-case, AC.
YG982S6R Low-Loss Fast Recovery Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF-10300024 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 6/04/04 ** 5/13/2010 SRJ 5/13/2010
CC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
GBPC15,25,35- Series. Features: Page <1> 10/08/10 V1.1
Features: Plastic material. Integrally moulded heatsink provide very low thermal resistance for maximum heat dissipation. Surge overload ratings from 300 to 400 amperes. Terminals solderable per MIL-STD-202,
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. Wide continuous voltage range: 30Vac ~ 465 Vac 4. Operating temperature range: -40 C ~ +25 C 5. Storage temperature range: -40 C ~
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
WL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
MeiLong Electronic Co.,Ltd. Lead Free Thin Film Chip Fuse. 1. Scope. 2. Construction. 3. Type Designation. Over Coat Conductor.
Lead Free Thin Film Chip Fuse Page 1/20 1. Scope This specification applies for the Lead-Free fuse se ries of thin film chip fuse made by ML. 2. Construction Over Coat Conductor Sn Plating Ceramic Substrate
WLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
Capacitor Selection Guide Space, Avionics & Defense
Selection Guide Space, Avionics & Defense Electronic Components EASY TO DESIGN IN Simulation Tool ksim.kemet.com Made for Engineers by Engineers engineeringcenter.com Catalogs and Technical Data www.kemet.com/mobileapps
ESAD83M-004RR. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode
ESAD83M-004RR Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak surge reverse voltage
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528ZGS-AMT Green Features Industry standard PLCC-2 package. High reliability LED package. Wide viewing angle. Single color. Suitable for all SMT assembly
Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
WLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SINGLE ROW DOUBLE ROW SLC
Radial Leaded > 250R Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers
250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).
400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
Rich, unique history of engineering, manufacturing and distributing
Rich, unique history of engineering, manufacturing and distributing United Silicon Carbide, inc. is a semiconductor company specializing in the development of high efficiency Silicon Carbide (SiC) devices
Silvertel. Ag Features. 2. Description. IEEE802.3bt PD Module
Silvertel V1.1 August 2018 Datasheet 1. Features Type 4 PD Compliant with IEEE802.3bt (Draft V3.2) 85 Watt Output Power Compact DIL package - 70mm(L) x 35mm(W) x 17mm(H) High efficiency DC/DC converter
S J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
Specification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
SolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
YA875C10R (100V, 20A)
YA875C10R (100V, 20A) Ultra Low IR Schottky Barrier Diode Features Ultra Low IR Low VF Tj MAX = 175 C High reliability at higher temperatures Outline Drawings [mm] Connection diagram TO-220AB YA875C10
Series. Applications Typical applications include decoupling and filtering in military and aerospace applications.
High Reliability COTS (CWR11 Style) T493 Military/Aerospace COTS MnO 2 Overview The KEMET T493 is designed for the COTS (Commercial Off-The-Shelf) requirements of military and aerospace applications. This
It is our policy to maintain high standards of product manufacturing and quality assurance.
FCI Semiconductor is a multinational company producing and marking a broad Range of Discrete and IC semiconductor components and materials. The company has manufacturing locations in Taiwan and China which
Features. P d typ. (W) I max (A)
250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503 Revision Made: ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
Silvertel. Ag9900M. 1. Features. 2. Description. Ultra Miniature PoE Module. Tiny SMT package (14mm x 21mm) IEEE802.3af compliant.
Silvertel V.7 February 20 Datasheet Ultra Miniature PoE Module Pb. Features Tiny SMT package (4mm x 2mm) IEEE02.3af compliant Low cost Input voltage range 36V to 57V Minimal external components required
Rev.A0
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P D V Z 3W 6.2V~200V T J,Max 150 Body Marking Example Marking : Please See Page 2~3 Ex : SMB3EZ5.6D5 Logo Date Code 3H6 VYM Cathode Band Marking Code FEATURES
General Purpose Relay
General Purpose Relay Designed small, 2- and 3-pole types break 5 A loads and 4-pole type, 3 A load High reliability, long life Ultra-high sensitivity with quick response High vibration/shock resistance
SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
Feature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip