0.6 / 1kV Afumex Flex Cable. The greater the flow of people, the better the protection should be.

Size: px

Start display at page:

Download "0.6 / 1kV Afumex Flex Cable. The greater the flow of people, the better the protection should be."

Dana Jenkins
5 years ago
Views:

1 0.6 / 1kV Afumex Flex Cable The greater the flow of people, the better the protection should be.

Afumex Flex Application Afumex Flex cables are recommended for fixed lighting and

in distribution circuit and terminal circuits, and low-voltage underground power lines.

of people, and in case of exposed electric line and open duct (tray, trench, etc.).

common areas, schools, churches, arenas, stadium, etc. Description for purchase 0.

HEPR 90 C thermoset compound, and halogen-free, thermoplastic compound jacket.

2 Afumex Flex Application Afumex Flex cables are recommended for fixed lighting and electricity installations in residential, commercial, industrial buildings, etc. in distribution circuit and terminal circuits, and low-voltage underground power lines. Cable installation should be according to NBR 5410 and NBR in BD2, BD3 and BD4 locations, i.e., in locations with long or crowded emergency exit routes and locations with a high flow of people, and in case of exposed electric line and open duct (tray, trench, etc.). These specific locations include: hospitals, theaters, movie theaters, shopping center common areas, schools, churches, arenas, stadium, etc. Description for purchase 0.6/1kV electric cable comprised of extra flexible, class 5, soft temper bare copper wire, HEPR 90 C thermoset compound, and halogen-free, thermoplastic compound jacket. According to NBR 13248, NBR and NBR Prysmian Reference: 0.6/1kV Afumex Flex (number of wires) X (Cross-section) mm² (#partnumber). LV_001_01_PT_Afumex_Flex_1kV/ 2

Installation False ceiling or raised floor, exposed conduit, cable tray, masonry conduit, hardwiring, masonry embedded, ventilated cable channel, buried conduit, directly buried, enclosed

The cable is suitable for installation in environments partially or totally submerged in water on an intermittent basis at up to 1 meter of water head. (NBR 5410 table 4 AD7).

2 INSULATION HEPR rubber thermoset compound 3 JACKET SHF1 type halogen-free thermoplastic compound maximum temperature 90 C in continuous service; 130 C at overload; 250 C at short-circuit.

voltages of fire; up to 1 kv - Performance Class 5 stringing flexibility requirements.

3 Installation False ceiling or raised floor, exposed conduit, cable tray, masonry conduit, hardwiring, masonry embedded, ventilated cable channel, buried conduit, directly buried, enclosed cable channel, tray, trench, ceiling, bracket, construction area and conduit in construction area. The cable is suitable for installation in environments partially or totally submerged in water on an intermittent basis at up to 1 meter of water head. (NBR 5410 table 4 AD7) Construction 1 WIRE Bare copper wires, soft temper. Stranding: Class 5 - extra flexible. 2 INSULATION HEPR rubber thermoset compound 3 JACKET SHF1 type halogen-free thermoplastic compound maximum temperature 90 C in continuous service; 130 C at overload; 250 C at short-circuit. Applicable standards Differentiating features NBR 13248: Halogen free, No emission of dark low smoke power cables and smoke insulated s without and toxic gases in case sheath, for rated voltages of fire; up to 1 kv - Performance Class 5 stringing flexibility requirements. provides easy handling NBR 13570: Electrical and installation; Installations in place with Ink engraving and high flow of persons - Specific marking meter by meter requirements. for all cross-sections. NBR 5410: low-voltage electrical Packaging installations. Reels for all NBR NM IEC : Test cross-sections. for vertical flame spread of Other packages vertically-mounted bunched upon request. wires or cables - Category C. LV_001_01_PT_Afumex_Flex_1kV/ 3

4 Identification Formation Core Colors Colors Cross-sections Single-pole - According to color table (XX) 1.5 mm² to 500 mm² Two-pole Black and Light Blue Black 1.5 mm² to 120 mm² Three-pole Black, Light Blue and Green or Black, Light Blue and White Black 1.5 mm² to 240 mm² Four-pole Black, Light Blue, Red and Green or Black, Light Blue, White and Red Black 1.5 mm² to 240 mm² Five-pole Black, White, Red, Light Blue and Green Black 1.5 mm² to 120 mm² Other identifications and jacket colors upon request. 0.6/1kV Afumex Flex (Single-pole) XX 1x XX 1x XX 1x XX 1x XX 1x XX 1x XX 1x XX 1x XX 1x (A) [4] XX 1x XX 1x XX 1x , XX 1x ,446 1, XX 1x ,730 1, XX 1x ,262 1, XX 1x ,860 2, XX 1x ,673 3, XX 1x ,590 4, Color table (XX) Colors White Black Red Gray Green Light blue Yellow Code Identify your cable model here! Example: XX Color code Black color Standard part number for section of 16 mm 2 Standard part number for section of 16 mm 2 LV_001_01_PT_Afumex_Flex_1kV/ 4

5 0.6/1kV Afumex Flex (Two-pole) x x x x x x (A) [5] x x Core Colors: Black and Light Blue. Other cross-sections and core colors upon request. 0.6/1kV Afumex Flex (Three-pole) * (A) [6] 3x * * * * * * * 3x x x x x x x , x ,997 1, x ,711 1, x ,460 2, x ,333 2, x ,526 3, x ,612 4, x ,576 5, Core Colors: Black, Light Blue and Green. *Core Colors: Black, Light Blue and White. Other cross-sections and core colors upon request. LV_001_01_PT_Afumex_Flex_1kV/ 5

6 0.6/1kV Afumex Flex (Four-pole) * (A) [6] 4x * * * * * * * 4x x x x x x , x ,622 1, x ,513 1, x ,418 2, x ,372 3, x ,585 3, x ,978 4, x ,383 5, x ,965 7, Core Colors: Black, Light Blue, Red and Green. *Core Colors: Black, Light Blue, White and Red. Other cross-sections and core colors upon request. 0.6/1kV Afumex Flex 0,6/1kV (Four-pole with reduced ground) x25+1G , x35+1G , x50+1G ,100 1, Core Colors: Black, Light Blue, Red and Green. Other cross-sections and core colors upon request. (A) [6] LV_001_01_PT_Afumex_Flex_1kV/ 6

7 0.6/1kV Afumex Flex (Five-pole) (Ω/km (A) [7] x x x x x x x ,465 1, x ,021 1, Core Colors: Black, White, Red, Light Blue and Green. Other cross-sections and core colors upon request. DC ohmic resistance at ambient temperature of 20 C; AC ohmic resistance at operating temperature of 90 C; [3] calculation based on a power factor of 0.92 for single-pole cable with trefoil formation and for multi-pole cables, according to construction; [4] Values taken from NBR F reference method: outdoor single-pole juxtaposed cables (horizontal, vertical, or in a trefoil arrangement), applicable to installation methods 13-17, table 33; [5] Values taken from NBR E reference method: outdoor multi-pole cable, applicable to installation methods 13-17, table 33, with two loaded wires; [6] Values taken from NBR E reference method: outdoor multi-pole cable, applicable to installation methods 13-17, table 33, with three loaded wires; [7] Values taken from NBR item E reference method: single-pole or multi-pole cables in perforated tray, horizontal or vertical, with four loaded wires. Note: for other installation methods, see our "Low-voltage electrical sizing guide." LV_001_01_PT_Afumex_Flex_1kV/ 7

Prysmian Group Prysmian Cabos e Sistemas do Brasil S.A. Avenida Pirelli 1,100 18.103-085 - Sorocaba - SP - Brazil Sales Service +55 11 4998 4155 ofertas.energia@prysmiangroup.

dimensions presented in this catalog, always meeting the values prescribed in the standards mentioned.

8 Prysmian Group Prysmian Cabos e Sistemas do Brasil S.A. Avenida Pirelli 1, Sorocaba - SP - Brazil Sales Service ofertas.energia@prysmiangroup.com Technical Service webcabos@prysmiangroup.com Prysmian reserves itself the right of changing, without previous notice, the technical features, weights and dimensions presented in this catalog, always meeting the values prescribed in the standards mentioned. Prysmian does not assume any responsibility for personal or material damages resulting from improper and/or negligent use of the information contained in this catalog. Refer to a qualified professional for the proper sizing of your project and installation. Images for illustration purposes only.

FTG10OM1-0,6/1KV. 50 N/mm 2 of copper section max for fixed layings

FTG10OM1-0,6/1KV. 50 N/mm 2 of copper section max for fixed layings HEPR insulated flexible with braided shield of red copper wires and plastic sheath of halogen-free flame retardant and without emission of corrosive gases. The keeps the electrical characteristics for