VS 6-8 SERIES 50Hz SUBMERSIBLE PUMPS, MOTORS and ACCESSORIES

Transcription

1 VS 6-8 SERIES 5Hz SUBMERSIBLE PUMPS, MOTORS and ACCESSORIES

2

3 INEX VS SERIES 6 VS Series Stainless Steel Subersible Pups for 6 deep wells and larger General Product Curves 6 Materials/Fluids copatibility 6 TABLE OF HYRAULIC PERFORMANCE VS 14 MEI,4 VS 19 MEI,4 VS 3 MEI,4 VS 46 MEI,4 VS 65 MEI,4 TECHNICAL ATA AN PERFORMANCE CURVES AT 5HZ VS 14 VS 14 High Pressure VS 19 VS 19 High Pressure VS 3 VS 3 High Pressure VS 46 VS 46 High Pressure VS 65 VS 65 High Pressure PUMP SECTION AN LIST OF MAIN COMPONENTS VS VS APPENIX A Motor adapter VS Motor adapter VS VS SERIES 8 VS Series Stainless Steel Subersible Pups for 8 deep wells and larger General Product Curves 8 Materials/Fluids copatibility 8 TABLE OF HYRAULIC PERFORMANCE VS 78 VS TECHNICAL ATA AN PERFORMANCE CURVES AT 5HZ VS 78 VS 97 PUMP SECTION AN LIST OF MAIN COMPONENTS VS APPENIX B Motor adapter VS SUBMERSIBLE MOTORS PROUCT 4 Encapsulated Motors 6 Encapsulated Motors 8 Encapsulated Motors 6 Rewindable otors 8 Rewindable otors ACCESSORIES SubMonitor Motor Protection SubStart3P SubTronicSC SubTronic3P Terination Kit 4 ouble Plug Lead for Terination Kit Splicing Kit 1,5 12 Filling liquid Motor Filling Kit 6 Peranent Star Plug Couplings Surge Arrestor Corrosion Protection 4 PT1 for Rewindable Motors NOTE: Franklin Electric s.r.l. reserves the right to aend specification without prior notice 3

4 4

5 VS Series Stainless Steel Subersible Pups for 6 deep wells and larger 5 Hz VS

6 VS Series 6 Stainless Steel Subersible Pups APPLICATIONS Municipal water works Water distribution and pressure boosting Irrigation and sprinkler systes, water treatent plants, filtration and reverse ososis Industrial cooling and processing Mining industry, drainage and dewatering Fire-fighting equipent Fountains FEATURES Fabricated stainless steel ipellers and diffusers for corrosion resistance Heavy duty stainless steel structure to assure peranent alignent of all the coponents in order to increase run tie and trouble-free operation PTFE floating neck ring, ceraic guide journal sleeve (tungsten-carbide on request) and Nitrile rubber fluted bearing to ensure durability against wear for long-lasting constant perforances and product reliability Copact, reliable and suited to operate in horizontal position Built-in check valve to protect the pup against water huer risk External stainless steel sleeve to iprove stiffness and assure peranent alignent of all the coponents Radial odels with double reinforceent rings and ix-flow odels longer than 3 t are equipped with tungsten-carbide (widia) upper journal sleeve and with an interediate tungsten-carbide (widia) journal sleeve plus special interediate split cone nut The hydraulic design is such to enhance the overall efficiency thus reducing energy consuption and aking the puping systes ore cost effective PUMP SPECIFICATIONS Capacities up to 8 3/h at 5Hz Head: up to 7 at 5Hz Maxiu allowable aount of sand 1 gr/3 Water teperature: Miniu: -5 C Maxiu: +6 C for I (A34) version / +9 C for N (A316) and R (94L) versions Rotation: counter clockwise when looking into the discharge Pup can work continuously in vertical or horizontal position MOTOR SPECIFICATIONS Motor adapter in copliance with NEMA standard Motors: see section Subersible Motors Product Overview AVAILABLE ON REQUEST Pup aterial: 316 Stainless steel (N) version (IN/EN 1.441) 94L (R) version (IN/EN ) See specified aterial variant in Materials/fluids copatibility table on page 6 ouble cable guard Rp 2 and Rp 3 discharge heads for VS14 and VS19 Rp 4 discharge head for VS I and N versions 4 otor adapter for I and N version 8 otor adapter for I and N version Tungsten-carbide guide journal sleeve High teperature version (up to 9 C) Bearings bush in FKM 6

7 U.S. gp Hz 225 ft VS 14 VS 19 VS VS VS ( 3 /h) PUMP IENTIFICATION COE / / VS I M6 Rp B1 P HP S Pup speciality: P (passivated); T (High teperature); HP (High pressure); S (double cable guard) Bearings bush aterial: B1 (NBR); V1: FKM Pup power at 6Hz Pup power at 5Hz ischarge head (threaded type and diension): Rp(X); NPT(X) Motor coupling diension: M4 (4"); M6 (6"); M8 (8") Material: I (AISI34); N (AISI316); R (AISI94L) Nuber of stages Noinal flow in 3/h Pup size 6: 6" Pups odel /216 Versions Motor power range Type I N R (kw) EN EN EN I AN N R VS VS VS VS VS46 3, VS65 3, = Version available = Version available only with 6 otor coupling 7

8 MATERIALS/FLUIS COMPATIBILITY MATERIAL Pos. PARTS ESCRIPTIONS Type I version N version R version AISI IN / EN AISI IN / EN AISI IN / EN 1. ischarge head Stainless steel L / 4 / 5 Valve Stainless steel /94L / Sealing O-ring NBR HNBR HNBR 1.3 Outer case locking nuts Stainless steel Outer case Stainless steel Suction strainer Stainless steel L Cable guard Stainless steel L Initial spacer Stainless steel L Flange and screws Stainless steel L / Motor adapter Stainless steel L Pup shaft Stainless steel / / Coupling Stainless steel 431/ / / / L/ /1.4539/ / 3 Upper / Lower up-thrust washer Stainless steel Upper journal sleeve Stainless steel with ceraic coat Screw and washer Stainless steel L/ / Up-thrust ring PTFE + Graphite / 8 Lower / Upper spacer Stainless steel iffuser Stainless steel L Secondary bearing bush NBR HNBR HNBR 4.2 Floating neck ring PTFE Flange claping neck ring Stainless steel L Bearing bush NBR HNBR HNBR 4.5 Last - int. diffuser / Upper bearing guide Stainless steel L / 7 / 8 First / Last diffuser Stainless steel / 5 Ipeller / Wear ring Stainless steel L Split cone / Ipeller spacer Stainless steel / 3 Split cone nut / Interediate cone nut Stainless steel Up-thrust split cone nut Stainless steel Interediate ipeller with screw Stainless steel L

9 VS 14 TABLE OF HYRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATE POWER Q = ELIVERY 3/h l/in kw HP H = TOTAL HEA METERS COLUMN OF WATER [] VS 14/5 4 5,5 56,1 5,7 48,4 45,4 41,4 31,3 18,6 VS 14/6 4 5,5 67,3 6,8 58,1 54,5 49,7 37,5 22,3 VS 14/7 4 5,5 78,5 71, 67,8 63,6 58, 43,8 26, VS 14/8 4 5,5 89,7 81,1 77,5 72,7 66,3 5, 29,7 VS 14/9 5,5 7,5 1,9 91,2 87,2 81,8 74,6 56,3 33,4 VS 14/1 5,5 7,5 112,1 11,4 96,9 9,9 82,9 62,5 37,1 VS 14/11 5,5 7,5 123,3 111,5 16,6 1, 91,2 68,8 4,8 VS 14/12 5,5 7,5 134,6 121,7 116,3 19,1 99,5 75, 44,6 VS 14/13 5,5 7,5 145,8 131,8 125,9 118,1 17,7 81,3 48,3 VS 14/14 7, , 141,9 135,6 127,2 116, 87,5 52, VS 14/15 7, ,2 152,1 145,3 136,3 124,3 93,8 55,7 VS 14/16 7, ,4 162,2 155, 145,4 132,6 1, 59,4 VS 14/17 7,5 1 19,6 172,3 164,7 154,5 14,9 16,3 63,1 VS 14/18 9,3 12,5 21,8 182,5 174,4 163,6 149,2 112,5 66,8 VS 14/19 9,3 12,5 213, 192,6 184,1 172,7 157,5 118,8 7,5 VS 14/2 9,3 12,5 224,3 22,8 193,8 181,8 165,8 125, 74,3 VS 14/21 9,3 12,5 235,5 212,9 23,4 19,8 174, 131,3 78, VS 14/22 9,3 12,5 246,7 223, 213,1 199,9 182,3 137,5 81,7 VS 14/ ,9 233,2 222,8 29, 19,6 143,8 85,4 VS 14/ ,1 243,3 232,5 218,1 198,9 15, 89,1 VS 14/ ,3 253,4 242,2 227,2 27,2 156,3 92,8 VS 14/ ,5 263,6 251,9 236,3 215,5 162,5 96,5 VS 14/ ,7 273,7 261,6 245,4 223,8 168,8 1,2 VS 14/ , 283,9 271,3 254,5 232,1 175, 14, VS 14/ ,2 294, 28,9 263,5 24,3 181,3 17,7 VS 14/ ,4 34,1 29,6 272,6 248,6 187,5 111,4 VS 14/ ,6 314,3 3,3 281,7 256,9 193,8 115,1 VS 14/ ,8 324,4 31, 29,8 265,2 2, 118,8 VS 14/ , 334,5 319,7 299,9 273,5 26,3 122,5 VS 14/ ,2 344,7 329,4 39, 281,8 212,5 126,2 VS 14/ ,4 354,8 339,1 318,1 29,1 218,8 129,9 VS 14/ ,7 365, 348,8 327,2 298,4 225, 133,7 VS 14/37 18, ,9 375,1 358,4 336,2 36,6 231,3 137,4 VS 14/38 18, ,1 385,2 368,1 345,3 314,9 237,5 141,1 VS 14/39 18, ,3 395,4 377,8 354,4 323,2 243,8 144,8 VS 14/4 18, ,5 45,5 387,5 363,5 331,5 25, 148,5 VS 14/41 18, ,7 415,6 397,2 372,6 339,8 256,3 152,2 VS 14/42 18, ,9 425,8 46,9 381,7 348,1 262,5 155,9 VS 14/43 18, ,1 435,9 416,6 39,8 356,4 268,8 159,6 VS 14/44 18, ,4 446,1 426,3 399,9 364,7 275, 163,4 VS 14/ ,6 456,2 435,9 48,9 372,9 281,3 167,1 VS 14/ ,8 466,3 445,6 418, 381,2 287,5 17,8 VS 14/ , 476,5 455,3 427,1 389,5 293,8 174,5 VS 14/ ,2 486,6 465, 436,2 397,8 3, 178,2 VS 14/ ,4 496,7 474,7 445,3 46,1 36,3 181,9 VS 14/ ,6 56,9 484,4 454,4 414,4 312,5 185,6 VS 14/ ,8 517, 494,1 463,5 422,7 318,8 189,3 VS 14/ ,1 527,2 53,8 472,6 431, 325, 193,1 VS 14/ ,3 537,3 513,4 481,6 439,2 331,3 196,8 VS 14/ ,5 547,4 523,1 49,7 447,5 337,5 2,5 VS 14/ ,7 557,6 532,8 499,8 455,8 343,8 24,2 VS 14/ ,9 567,7 542,5 58,9 464,1 35, 27,9 VS 14/ ,1 577,8 552,2 518, 472,4 356,3 211,6 VS 14/ ,3 588, 561,9 527,1 48,7 362,5 215,3 VS 14/ ,5 598,1 571,6 536,2 489, 368,8 219, VS 14/ ,8 68,3 581,3 545,3 497,3 375, 222,8 VS 14/ , 618,4 59,9 554,3 55,5 381,3 226,5 9

10 VS 19 TABLE OF HYRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATE POWER Q = ELIVERY 3/h l/in kw HP H = TOTAL HEA METERS COLUMN OF WATER [] VS 19/7 5,5 7,5 81,7 77,5 74,7 72,3 67,2 6,2 5,4 38,4 23,9 VS 19/8 5,5 7,5 93,3 88,5 85,3 82,7 76,8 68,8 57,6 43,9 27,4 VS 19/9 5,5 7,5 15, 99,6 96, 93, 86,4 77,4 64,8 49,4 3,8 VS 19/1 7, ,7 11,7 16,7 13,3 96, 86, 72, 54,9 34,2 VS 19/11 7, ,3 121,7 117,3 113,7 15,6 94,6 79,2 6,4 37,6 VS 19/12 7,5 1 14, 132,8 128, 124, 115,2 13,2 86,4 65,8 41, VS 19/13 9,3 12,5 151,7 143,9 138,7 134,3 124,8 111,8 93,6 71,3 44,5 VS 19/14 9,3 12,5 163,3 154,9 149,3 144,7 134,4 12,4 1,8 76,8 47,9 VS 19/15 9,3 12, ,3 51,3 VS 19/ ,7 177,1 17,7 165,3 153,6 137,6 115,2 87,8 54,7 VS 19/ ,3 188,1 181,3 175,7 163,2 146,2 122,4 93,3 58,1 VS 19/ , 199,2 192, 186, 172,8 154,8 129,6 98,8 61,6 VS 19/ ,7 21,3 22,7 196,3 182,4 163,4 136,8 14,2 65, VS 19/ ,3 221,3 213,3 26,7 192, 172, 144, 19,7 68,4 VS 19/ , 232,4 224, 217, 21,6 18,6 151,2 115,2 71,8 VS 19/ ,7 243,5 234,7 227,3 211,2 189,2 158,4 12,7 75,2 VS 19/ ,3 254,5 245,3 237,7 22,8 197,8 165,6 126,2 78,7 VS 19/ , 265,6 256, 248, 23,4 26,4 172,8 131,7 82,1 VS 19/25 18, ,7 276,7 266,7 258,3 24, 215, 18, 137,2 85,5 VS 19/26 18, ,3 287,7 277,3 268,7 249,6 223,6 187,2 142,7 88,9 VS 19/27 18, , 298,8 288, 279, 259,2 232,2 194,4 148,1 92,3 VS 19/28 18, ,7 39,9 298,7 289,3 268,8 24,8 21,6 153,6 95,8 VS 19/29 18, ,3 32,9 39,3 299,7 278,4 249,4 28,8 159,1 99,2 VS 19/3 18, , 332, 32, 31, 288, 258, 216, 164,6 12,6 VS 19/ ,7 343,1 33,7 32,3 297,6 266,6 223,2 17,1 16, VS 19/ ,3 354,1 341,3 33,7 37,2 275,2 23,4 175,6 19,4 VS 19/ , 365,2 352, 341, 316,8 283,8 237,6 181,1 112,9 VS 19/ ,7 376,3 362,7 351,3 326,4 292,4 244,8 186,5 116,3 VS 19/ ,3 387,3 373,3 361,7 336, 31, 252, 192, 119,7 VS 19/ , 398,4 384, 372, 345,6 39,6 259,2 197,5 123,1 VS 19/ ,7 49,5 394,7 382,3 355,2 318,2 266,4 23, 126,5 VS 19/ ,3 42,5 45,3 392,7 364,8 326,8 273,6 28,5 13, VS 19/ , 431,6 416, 43, 374,4 335,4 28,8 214, 133,4 VS 19/ ,7 442,7 426,7 413,3 384, 344, 288, 219,5 136,8 VS 19/ ,3 453,7 437,3 423,7 393,6 352,6 295,2 225, 14,2 VS 19/ , 464,8 448, 434, 43,2 361,2 32,4 23,4 143,6 VS 19/ ,7 475,9 458,7 444,3 412,8 369,8 39,6 235,9 147,1 VS 19/ ,3 486,9 469,3 454,7 422,4 378,4 316,8 241,4 15,5 VS 19/ , 498, 48, 465, 432, 387, 324, 246,9 153,9 VS 19/ ,7 59,1 49,7 475,3 441,6 395,6 331,2 252,4 157,3 VS 19/ ,3 52,1 51,3 485,7 451,2 44,2 338,4 257,9 16,7 VS 19/ , 531,2 512, 496, 46,8 412,8 345,6 263,4 164,2 VS 19/ ,7 542,3 522,7 56,3 47,4 421,4 352,8 268,8 167,6 VS 19/ ,3 553,3 533,3 516,7 48, 43, 36, 274,3 171, VS 19/ , 564,4 544, 527, 489,6 438,6 367,2 279,8 174,4 VS 19/ ,7 575,5 554,7 537,3 499,2 447,2 374,4 285,3 177,8 VS 19/ ,3 586,5 565,3 547,7 58,8 455,8 381,6 29,8 181,3 VS 19/ , 597,6 576, 558, 518,4 464,4 388,8 296,3 184,7 VS 19/ ,7 68,7 586,7 568,3 528, 473, 396, 31,8 188,1 VS 19/ ,3 619,7 597,3 578,7 537,6 481,6 43,2 37,3 191,5 VS 19/ , 63,8 68, 589, 547,2 49,2 41,4 312,7 194,9 VS 19/ ,7 641,9 618,7 599,3 556,8 498,8 417,6 318,2 198,4 VS 19/ ,3 652,9 629,3 69,7 566,4 57,4 424,8 323,7 21,8 VS 19/ , 664, 64, 62, 576, 516, 432, 329,2 25,2 1

11 VS 3 TABLE OF HYRAULIC PERFORMANCES AT 5Hz PUMP TYPE R Vers. RATE POWER Q = ELIVERY 3/h l/in 83,5 166, ,5 416, ,5 666, ,5 916, ,5 1166, ,5 kw HP H = TOTAL HEA METERS COLUMN OF WATER [] VS 3/3 3,7 5 46,3 38, ,3 3,2 26,7 21,7 15,3 VS 3/4 5,5 7,5 62,5 52,6 48,8 45,2 41,1 36,5 3 21,4 VS 3/5 7,5 1 78,6 66,2 61,5 56,9 51,8 46, ,4 VS 3/6 7,5 1 93,1 78,4 72,6 67, ,1 31,2 VS 3/7 9,3 12, , ,7 72,6 64,6 53,3 38,4 VS 3/ ,5 15,7 98,1 9,9 82,7 73,6 6,5 43,5 VS 3/ ,1 117,9 19,3 11,1 91,8 81,4 66,6 47,3 VS 3/ ,2 133,3 123,8 114,9 14,7 93,5 77,3 56,1 VS 3/ ,7 135,3 125,4 114,1 11,7 83,8 6,4 VS 3/ , ,6 135,7 123,4 19,6 9 64,4 VS 3/13 18, ,2 172,9 16,6 148,9 135,7 121,1 1 72,4 VS 3/14 18, ,3 172,1 159,4 145,1 129,2 16,5 76,7 VS 3/ ,7 185,5 172,1 156, ,7 84 VS 3/ ,9 212,2 197,1 182,6 166,3 148,3 122,3 88,3 VS 3/ ,7 224,5 28, ,7 156,4 128,7 92,5 VS 3/ ,3 236,8 219,7 23, ,3 134,9 96,5 VS 3/ ,1 254,7 236,8 219,9 2,7 179,7 149,2 19,1 VS 3/ ,3 267,4 248,6 23,7 21,5 188, ,8 VS 3/ , ,2 241,5 22,1 196,7 162,8 118,3 VS 3/ ,3 292,6 271,8 252,1 229, ,4 122,7 VS 3/ ,2 35,1 283,4 262,6 239,2 213,2 175,9 127 VS 3/ ,5 294,8 273,1 248,6 221,4 182,2 131,2 VS 3/ , , ,5 233,5 193,1 14,1 VS 3/ ,1 345,5 32,9 297,5 271,1 241,8 199,7 144,5 VS 3/ ,9 332,4 38,1 28, ,1 148,8 VS 3/ ,8 37,3 343,8 318,5 289,9 258,1 212,5 152,9 VS 3/ ,5 382,6 355,2 328,9 299,2 266,2 218,8 157 VS 3/ ,1 394,9 366,4 339,1 38,5 274,1 224,9 16,9 VS 3/ ,9 383,6 355,8 324,2 289,4 239,3 173,6 VS 3/ ,4 395,2 366,4 333,7 297,7 245,8 177,9 VS 3/ ,8 437,9 46,7 376,9 343,2 35,9 252,2 182,1 VS 3/ ,6 45,3 418,1 387,3 352, ,6 186,2 VS 3/ ,4 462,6 429,5 397,7 361, ,8 19,2 VS 3/ ,1 474,9 44, ,1 329,9 27,9 194,2 VS 3/ ,7 487, ,2 38,3 337, VS 3/ ,9 517,4 481,6 448,2 49,8 368,6 38,6 229,2 VS 3/ ,4 53,5 493,7 459, ,6 315,9 234,4 VS 3/ ,5 55,8 47,6 43,1 386,6 323,2 239,6 VS 3/ ,4 556,6 517,9 481,7 44,2 395,6 33,5 244,7 VS 3/ ,9 569,5 529,9 492,8 45,3 44,5 337,7 249,8 VS 3/ ,3 582, ,9 46,3 413,3 344,9 254,8 = Pup available in R (AISI 94L) version 11

12 VS 46 TABLE OF HYRAULIC PERFORMANCES AT 5Hz PUMP TYPE R Vers. RATE POWER Q = ELIVERY 3/h l/in 83,5 166, ,5 416, ,5 666, ,5 916, ,5 1166, ,5 kw HP H = TOTAL HEA METERS COLUMN OF WATER [] VS 46/ ,4 22,6 2,9 19,3 17,8 16,6 15,1 13,4 11,3 VS 46/3 4 5,5 39,4 33,8 31,2 28,8 26,6 24,7 22,5 19,9 16,8 VS 46/4 5,5 7,5 52, ,5 38,3 35,5 32,9 29,9 26,5 22,3 VS 46/5 7,5 1 66,1 56,8 52,3 48,3 44,7 41,5 37,8 33,6 28,4 VS 46/6 9,3 12,5 8,7 7 65,2 6,4 55,5 5, ,6 35,7 VS 46/7 9,3 12,5 93,1 8,4 74,8 69,3 63,5 57,6 52,7 47,5 4,5 VS 46/ ,1 91,6 85,1 78,9 72,2 65,5 59, VS 46/ ,5 15,5 98, ,7 75,9 69,5 62,9 54,1 VS 46/ ,1 18 1,1 91,9 83,3 76,2 68,9 59 VS 46/ ,3 126,5 117, ,9 9,5 82,8 74,7 63,7 VS 46/12 18, , ,3 12,8 11,9 1, ,3 71,4 VS 46/13 18, ,8 15, , ,9 98,7 89,2 76,3 VS 46/14 18, ,1 16,9 149,5 138, ,1 15, VS 46/ ,8 174,1 161,9 15,1 137,7 124,9 114,3 13,3 88,4 VS 46/ ,2 184,5 171,5 159,1 145,8 132,2 12,9 19,1 93,2 VS 46/ ,4 194, ,8 153,6 139,3 127,3 114,8 97,8 VS 46/ ,8 212,3 197,6 183,1 168,6 152,9 139,9 126,8 19,2 VS 46/ ,6 223,1 27,7 192, ,5 146, ,4 VS 46/ ,2 233,8 217,6 21,7 185,3 168,1 153,7 139,1 119,5 VS 46/ ,8 244,4 227,4 21,8 193,5 175,5 16,5 145,2 124,4 VS 46/ ,2 254, ,8 21,6 182,8 167,2 151,1 129,3 VS 46/ ,6 265,2 246,6 228,6 29, ,8 156,9 134 VS 46/ ,4 279,8 26,3 241,3 221,6 2,9 183,8 166,3 142,6 VS 46/ ,9 29, ,3 229,7 28,3 19,6 172,2 147,5 VS 46/ ,3 3,7 279,6 259,3 237,8 215,6 197,2 178,1 152,3 VS 46/ ,6 311,1 289,2 268,2 245,7 222,8 23,7 183,9 157 VS 46/ ,8 321,3 298,6 276,9 253,6 229,9 21,2 189,6 161,7 VS 46/ ,1 338,7 315,1 292,1 268,3 243,3 222,6 21,4 172,9 VS 46/ ,7 349,2 324,9 31,1 276,5 25,7 229,4 27,4 177,8 VS 46/ ,1 359,6 334,5 31,1 284, ,3 182,6 VS 46/ , , ,5 265,2 242,6 219,1 187,4 VS 46/ ,8 38,3 353,5 327,8 3,4 272,3 249,1 224,8 192 VS 46/ ,3 41,9 383,1 354, ,6 271,9 248,1 215,7 VS 46/ ,5 422,3 393,7 364, ,8 279,4 254,8 221,4 VS 46/ ,7 433,7 44,3 374,4 345,9 313,9 286,8 261,4 227 VS 46/ , ,8 384,1 354,8 321,9 294,2 268,1 232,6 VS 46/ ,3 425,3 393,8 363, ,6 274,7 238,2 VS 46/ ,1 467,5 435,7 43,5 372,5 337,9 38,9 281,2 243,8 VS 46/ ,1 478,7 446,1 413,1 381,3 345,9 316,2 287,8 249,3 = Pup available in R (AISI 94L) version 12

13 VS 65 TABLE OF HYRAULIC PERFORMANCES AT 5Hz PUMP TYPE R Vers. RATE POWER Q = ELIVERY 3/h l/in 83,5 166, ,5 416, ,5 666, ,5 916, ,5 1166, ,5 kw HP H = TOTAL HEA METERS COLUMN OF WATER [] VS 65/2 3,7 5 26,8 21, ,3 16,5 15,7 14,9 13,9 12,4 1,5 8,2 VS 65/3 5,5 7,5 4,4 31,8 28,8 26,2 24,9 23,7 22, , ,6 VS 65/4 7, ,5 38, ,2 31,6 3, ,2 21,4 16,9 VS 65/5 9,3 12, ,8 48,7 44,3 41,9 4,1 38,2 35,6 32,2 27,5 22 VS 65/ , ,9 52,7 5 47,7 45,3 42,3 38,1 32,3 25,7 VS 65/ ,9 76,2 7,1 65,2 61,7 58,6 55,7 52,1 46,1 39,7 33,4 VS 65/ , ,1 73,5 69,7 66,1 62,8 58,5 51,6 44,3 37 VS 65/ ,1 95,5 87,8 81,5 77,4 73,4 69,6 64,6 56,8 48,6 4,2 VS 65/1 18, ,5 17, ,9 87,2 82,7 78,5 73,2 64,6 55,5 46,3 VS 65/11 18, ,2 17,8 1, ,4 79,4 69,8 59,9 49,6 VS 65/ ,2 128,9 118,5 11,1 14,4 99,1 94,1 87,6 77,3 66,3 55,3 VS 65/ ,7 138,5 127,3 118,2 112,2 16, ,8 82,5 7,8 58,6 VS 65/ ,3 153, , ,9 93 8,2 67,7 VS 65/ ,2 163,4 15,2 139,6 132,2 125,7 119,3 111,5 98, ,5 VS 65/ ,3 159, ,3 133,2 126,5 118,1 14,3 89,7 75,2 VS 65/ , ,3 156,3 148,2 14,7 133,5 124,4 19,8 94,3 78,8 VS 65/ ,4 195,5 179, ,2 15,3 142,7 133,3 117,9 11,5 85,2 VS 65/ ,1 25,3 188,8 175,4 166,2 157,9 149,9 139,8 123,5 16,1 88,9 VS 65/ , ,7 183,7 174,1 165,3 156,9 146,2 128,9 11,7 92,4 VS 65/ ,4 224,6 26,5 191, ,6 163,8 152,4 134,2 115,1 95,7 VS 65/ ,7 239,2 219,9 24,4 193,6 183,9 174,6 163,2 144,3 124,2 14,4 VS 65/ , ,7 21,6 191,4 181,7 169,6 149,8 128,9 18 VS 65/ ,2 258,7 237, ,5 198,9 188, ,3 133,4 111,5 VS 65/ ,8 268,4 246,7 229,2 217,3 26,2 195,7 182,2 16,6 137,9 114,9 VS 65/ ,4 277,9 255,5 237,3 225,1 213,5 22,5 188,3 165,8 142,2 118,1 VS 65/ , ,8 259,3 244,7 233,4 221,6 28,5 186,4 161,6 137,5 VS 65/ ,1 313,5 288,5 268,3 253,3 241,5 229,3 215,7 192,6 166,9 142 VS 65/ , ,1 277,2 261,8 249, ,8 198,8 172,2 146,4 VS 65/ ,6 334,5 37,7 286,1 27,3 257,6 244,6 229,8 24,9 177,4 15,8 VS 65/ ,8 344,9 317, ,7 265,5 252,2 236, ,6 155 = Pup available in R (AISI 94L) version 13

14 14

15 Technical ata and Perforance Curves 5 Hz VS

16 VS 14 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 14/5 E4 2, , ,5 142,5-26,5 VS 14/6 E4 3, , ,5 142,5-32 VS 14/7 E4 3, , ,5 142,5-32 VS 14/8 E4 3,7 5 53, ,5 142,5-33 VS 14/9 E4 5,5 7,5 533,5 652, ,5-41 VS 14/1 E4 5,5 7,5 563,5 652, ,5-41,5 VS 14/11 E4 5,5 7,5 593,5 652, ,5-42,5 VS 14/12 E4 5,5 7,5 623,5 652, ,5-43,5 VS 14/13 E4 5,5 7,5 653,5 652, ,5-44 VS 14/14 E4 7, ,5 73, ,5-49 VS 14/15 E4 7, ,5 73, ,5-49,5 VS 14/16 E4 7, ,5 73, ,5-5,5 VS 14/17 E4 7, ,5 73, ,5-51 VS 14/5 E6 4 5, ,5 49 VS 14/6 E6 4 5, ,5 5 VS 14/7 E6 4 5, ,5 5,5 VS 14/8 E6 4 5, ,5 51,5 VS 14/9 E6 5,5 7, ,5 1145, ,5 55,5 VS 14/1 E6 5,5 7, ,5 1175, ,5 56 VS 14/11 E6 5,5 7, ,5 125, ,5 57 VS 14/12 E6 5,5 7, ,5 1235, ,5 58 VS 14/13 E6 5,5 7, ,5 1265, ,5 58,5 VS 14/14 E6 7, ,5 63,5 VS 14/15 E6 7, ,5 64 VS 14/16 E6 7, ,5 65 VS 14/17 E6 7, ,5 65,5 VS 14/18 E6 9,3 12, ,5 1479, ,5 69 VS 14/19 E6 9,3 12, ,5 159, ,5 69,5 VS 14/2 E6 9,3 12, ,5 1539, ,5 7,5 VS 14/21 E6 9,3 12, ,5 1569, ,5 71 VS 14/22 E6 9,3 12, ,5 1599, ,5 71,5 VS 14/23 E ,5 76 VS 14/24 E ,5 76,5 VS 14/25 E ,5 77,5 VS 14/26 E ,5 78 Rp 2"½ L1 Lt PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 14/5 RW6 4 5, ,5 59,5 VS 14/6 RW6 4 5, ,5 6,5 VS 14/7 RW6 4 5, ,5 61 VS 14/8 RW6 4 5, ,5 62 VS 14/9 RW6 5,5 7, ,5 62,5 VS 14/1 RW6 5,5 7, ,5 63 VS 14/11 RW6 5,5 7, ,5 64 VS 14/12 RW6 5,5 7, ,5 65 VS 14/13 RW6 5,5 7, ,5 65,5 VS 14/14 RW6 7, ,5 68,5 VS 14/15 RW6 7, ,5 69 VS 14/16 RW6 7, ,5 7 VS 14/17 RW6 7, ,5 7,5 VS 14/18 RW6 9,3 12, ,5 74,5 VS 14/19 RW6 9,3 12, ,5 75 VS 14/2 RW6 9,3 12, ,5 76 VS 14/21 RW6 9,3 12, ,5 76,5 VS 14/22 RW6 9,3 12, ,5 77 VS 14/23 RW ,5 81 VS 14/24 RW ,5 81,5 VS 14/25 RW ,5 82,5 VS 14/26 RW ,5 83 L /21 16

17 PERFORMANCE CURVES 5HZ ft 3 Total Head NPSH Power/stg HP,6,5,4,3,2 ft kw,5,4,3,2, p/stg % /h Efficiency 4 3/h 3/h Capacity l /in U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 17

18 VS 14 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 14/27 E ,5 85,5 VS 14/28 E ,5 85,5 VS 14/29 E ,5 87 VS 14/3 E ,5 87,5 VS 14/31 E ,5 87,5 VS 14/32 E , , ,5 88 VS 14/33 E , , ,5 89 VS 14/34 E , , ,5 9 VS 14/35 E , , ,5 9,5 VS 14/36 E , , ,5 91 VS 14/37 E6 18, ,5 841, ,5 99 VS 14/38 E6 18, ,5 841, ,5 99,5 VS 14/39 E6 18, ,5 841, ,5 11 VS 14/4 E6 18, ,5 841, ,5 12 VS 14/41 E6 18, ,5 841, ,5 12,5 VS 14/42 E6 18, ,5 841, ,5 12,5 VS 14/43 E6 18, ,5 841, ,5 13,5 VS 14/44 E6 18, ,5 841, ,5 14 VS 14/45 E ,5 96, ,5 111 VS 14/46 E ,5 96, ,5 111,5 VS 14/47 E ,5 96, ,5 112,5 VS 14/48 E ,5 266, ,5 113,5 VS 14/49 E ,5 96, ,5 114,5 Rp 2"½ L1 PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 14/27 RW , ,5 9 VS 14/28 RW , ,5 9 VS 14/29 RW , ,5 91,5 VS 14/3 RW , ,5 92 VS 14/31 RW , ,5 92 VS 14/32 RW , , ,5 97,5 VS 14/33 RW , , ,5 98,5 VS 14/34 RW , , ,5 99,5 VS 14/35 RW , , ,5 1 VS 14/36 RW , , ,5 1,5 VS 14/37 RW6 18, , , ,5 15,5 VS 14/38 RW6 18, , , ,5 16 VS 14/39 RW6 18, , , ,5 17,5 VS 14/4 RW6 18, , , ,5 18,5 VS 14/41 RW6 18, , , ,5 19 VS 14/42 RW6 18, , , ,5 19 VS 14/43 RW6 18, , , ,5 11 VS 14/44 RW6 18, , , ,5 11,5 VS 14/45 RW , , ,5 12,5 VS 14/46 RW , , ,5 121 VS 14/47 RW , , ,5 122 VS 14/48 RW ,5 123 VS 14/49 RW , , ,5 124 L2 Lt /21 18

19 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg HP,6,5,4,3,2 ft kw,5,4,3,2, p/stg % /h Efficiency 4 3/h 3/h Capacity l /in U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 19

20 VS 14 High Pressure 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 14/5 E ,5 96, ,5 115,5 VS 14/51 E ,5 96, ,5 116,5 VS 14/52 E ,5 96, ,5 117,5 VS 14/53 E ,5 136, ,5 133 VS 14/54 E ,5 136, ,5 133,5 VS 14/55 E ,5 136, ,5 134,5 VS 14/56 E ,5 136, ,5 135,5 VS 14/57 E ,5 136, ,5 136 VS 14/58 E ,5 336, ,5 137 VS 14/59 E ,5 366, ,5 138 VS 14/6 E ,5 396, ,5 139 VS 14/61 E ,5 3126, ,5 14 Rp 2"½ L1 PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 14/5 RW , , ,5 125 VS 14/51 RW , , ,5 126 VS 14/52 RW , , ,5 127 VS 14/53 RW , , ,5 139 VS 14/54 RW , , ,5 139,5 VS 14/55 RW , , ,5 14,5 VS 14/56 RW , , ,5 141,5 VS 14/57 RW , , ,5 142 VS 14/58 RW ,5 143 VS 14/59 RW ,5 144 VS 14/6 RW ,5 145 VS 14/61 RW ,5 146 Lt L /21 2

21 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg 7 HP,6,5,4,3,2 ft kw,5,4,3, , /h p/stg % /h Efficiency 3/h Capacity l /in U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 21

22 VS 19 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 19/6 E4 3, , ,5 142,5-31,5 VS 19/7 E4 5,5 7, ,5 1187,5 142,5-4 VS 19/8 E4 5,5 7,5 572,5 652, ,5-41 VS 19/9 E4 5,5 7, ,5 1262,5 142,5-41,5 VS 19/1 E4 7, ,5 73, ,5-46,5 VS 19/11 E4 7, ,5 1415,5 142,5-47,5 VS 19/12 E4 7, ,5 73, ,5-48 VS 19/6 E6 4 5, ,5 5 VS 19/7 E6 5,5 7,5 532,5 614, ,5 54,5 VS 19/8 E6 5,5 7, ,5 1184, ,5 55,5 VS 19/9 E6 5,5 7,5 67,5 614, ,5 56 VS 19/1 E6 7, ,5 61 VS 19/11 E6 7, , , ,5 62 VS 19/12 E6 7, ,5 62,5 VS 19/13 E6 9,3 12,5 757,5 678, ,5 66 VS 19/14 E6 9,3 12, ,5 1473, ,5 67 VS 19/15 E6 9,3 12,5 832,5 678, ,5 67,5 VS 19/16 E ,5 72 VS 19/17 E , , ,5 73 VS 19/18 E ,5 73,5 VS 19/19 E , , ,5 8 VS 19/2 E ,5 8,5 VS 19/21 E , , ,5 81,5 VS 19/22 E ,5 82,5 VS 19/23 E , , ,5 83 VS 19/24 E ,5 84 Rp 2"½ L1 Lt PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 19/6 RW6 4 5, ,5 6,5 VS 19/7 RW6 5,5 7,5 532, , ,5 61,5 VS 19/8 RW6 5,5 7, ,5 62,5 VS 19/9 RW6 5,5 7,5 67, , ,5 63 VS 19/1 RW6 7, ,5 66 VS 19/11 RW6 7, , , ,5 67 VS 19/12 RW6 7, ,5 67,5 VS 19/13 RW6 9,3 12,5 757, , ,5 71,5 VS 19/14 RW6 9,3 12, ,5 72,5 VS 19/15 RW6 9,3 12,5 832, , ,5 73 VS 19/16 RW ,5 77 VS 19/17 RW , , ,5 78 VS 19/18 RW ,5 78,5 VS 19/19 RW ,5 982, , ,5 84,5 VS 19/2 RW , ,5 85 VS 19/21 RW ,5 157, , ,5 86 VS 19/22 RW ,5 92 VS 19/23 RW , , ,5 92,5 VS 19/24 RW ,5 93,5 L /21 22

23 PERFORMANCE CURVES 5HZ ft 3 Total Head NPSH Power/stg HP,9,8,7,6,5,4 ft kw,7,6,5,4, p/stg % /h Efficiency 4 3/h 3/h Capacity l /in U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 23

24 VS 19 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 19/25 E6 18, ,5 841, ,5 92 VS 19/26 E6 18, ,5 286, ,5 92,5 VS 19/27 E6 18, ,5 841, ,5 94,5 VS 19/28 E6 18, ,5 841, ,5 94,5 VS 19/29 E6 18, ,5 2198, ,5 95 VS 19/3 E6 18, ,5 841, ,5 96 VS 19/31 E ,5 2338, ,5 13 VS 19/32 E ,5 96, ,5 13,5 VS 19/33 E ,5 2413, ,5 14,5 VS 19/34 E ,5 96, ,5 15 VS 19/35 E ,5 2488, ,5 16 VS 19/36 E ,5 96, ,5 16,5 VS 19/37 E ,5 2693, ,5 122,5 VS 19/38 E ,5 136, ,5 124 VS 19/39 E ,5 2768, ,5 124 VS 19/4 E ,5 136, ,5 124,5 VS 19/41 E ,5 2843, ,5 126 VS 19/42 E ,5 136, ,5 127 VS 19/43 E ,5 2918, ,5 128 VS 19/44 E ,5 136, ,5 129 VS 19/45 E ,5 2993, ,5 13 VS 19/46 E ,5 33, ,5 131 Rp 2"½ L1 PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 19/25 E6 18, ,5 841, ,5 92 VS 19/26 E6 18, ,5 286, ,5 92,5 VS 19/27 E6 18, ,5 841, ,5 94,5 VS 19/28 E6 18, ,5 841, ,5 94,5 VS 19/29 E6 18, ,5 2198, ,5 95 VS 19/3 E6 18, ,5 841, ,5 96 VS 19/31 E ,5 2338, ,5 13 VS 19/32 E ,5 96, ,5 13,5 VS 19/33 E ,5 2413, ,5 14,5 VS 19/34 E ,5 96, ,5 15 VS 19/35 E ,5 2488, ,5 16 VS 19/36 E ,5 96, ,5 16,5 VS 19/37 E ,5 2693, ,5 122,5 VS 19/38 E ,5 136, ,5 124 VS 19/39 E ,5 2768, ,5 124 VS 19/4 E ,5 136, ,5 124,5 VS 19/41 E ,5 2843, ,5 126 VS 19/42 E ,5 136, ,5 127 VS 19/43 E ,5 2918, ,5 128 VS 19/44 E ,5 136, ,5 129 VS 19/45 E ,5 2993, ,5 13 VS 19/46 E ,5 33, ,5 131 L2 Lt /21 24

25 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg HP,9,8,7,6,5,4 ft kw,7,6,5,4, p/stg % /h Efficiency 4 3/h 3/h Capacity l /in U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 25

26 VS 19 High Pressure 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 19/47 E ,5 136, ,5 131,5 VS 19/48 E ,5 315, ,5 132 VS 19/49 E ,5 136, ,5 134 VS 19/5 E ,5 3565, ,5 189 VS 19/51 E ,5 1421, ,5 19 VS 19/52 E ,5 364, ,5 191 VS 19/53 E ,5 1421, ,5 192 VS 19/54 E ,5 3715, ,5 193 VS 19/55 E ,5 1421, ,5 194 VS 19/56 E ,5 379, ,5 195 VS 19/57 E ,5 1421, ,5 196 VS 19/58 E ,5 3865, ,5 197 VS 19/59 E ,5 1421, ,5 198 VS 19/6 E ,5 394, ,5 199 Rp 2"½ L1 PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 19/47 E ,5 136, ,5 131,5 VS 19/48 E ,5 315, ,5 132 VS 19/49 E ,5 136, ,5 134 VS 19/5 E ,5 3565, ,5 189 VS 19/51 E ,5 1421, ,5 19 VS 19/52 E ,5 364, ,5 191 VS 19/53 E ,5 1421, ,5 192 VS 19/54 E ,5 3715, ,5 193 VS 19/55 E ,5 1421, ,5 194 VS 19/56 E ,5 379, ,5 195 VS 19/57 E ,5 1421, ,5 196 VS 19/58 E ,5 3865, ,5 197 VS 19/59 E ,5 1421, ,5 198 VS 19/6 E ,5 394, ,5 199 Lt L /21 26

27 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg 7,9,8,7,6,5,4 HP ft kw /h,7 8 %,6 p/stg 7,5,4, /h Efficiency 3/h Capacity l /in U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 27

28 VS 3 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 3/3 E4 3, ,5-34 VS 3/4 E4 5,5 7,5 77,5 652, ,5-43,5 VS 3/5 E4 7, ,5 1523,5 142,5-5 VS 3/6 E4 7, ,5 73, ,5-52 VS 3/3 E6 4 5, ,5 52 VS 3/4 E6 5,5 7,5 75,5 614, ,5 58 VS 3/5 E6 7,5 1 79, , ,5 64 VS 3/6 E6 7, ,5 66 VS 3/7 E6 9,3 12,5 961,5 678, ,5 7,5 VS 3/8 E ,5 76,5 VS 3/9 E , , ,5 78,5 VS 3/1 E ,5 86 VS 3/11 E , , ,5 88 VS 3/12 E ,5 9 VS 3/13 E6 18, ,5 841, ,5 99 VS 3/14 E6 18, ,5 241, ,5 11,5 VS 3/15 E ,5 96, ,5 19,5 VS 3/16 E ,5 96, ,5 111,5 VS 3/17 E ,5 2722, ,5 113,5 VS 3/18 E ,5 96, ,5 115,5 VS 3/19 E ,5 323, ,5 132 VS 3/2 E ,5 136, ,5 134,5 Rp 3" L1 PUMPS WITH REWINABLE MOTOR Pup odel type R vers. Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 3/3 RW6 4 5, ,5 62,5 VS 3/4 RW6 5,5 7,5 75, , ,5 65 VS 3/5 RW6 7,5 1 79, , ,5 69 VS 3/6 RW6 7, ,5 71 VS 3/7 RW6 9,3 12,5 961, , ,5 76 VS 3/8 RW ,5 81,5 VS 3/9 RW , , ,5 83,5 VS 3/1 RW , ,5 9,5 VS 3/11 RW , , ,5 97,5 VS 3/12 RW ,5 99,5 VS 3/13 RW6 18, , , ,5 15,5 VS 3/14 RW6 18, ,5 18 VS 3/15 RW , , ,5 119 VS 3/16 RW , , ,5 121 VS 3/17 RW ,5 123 VS 3/18 RW , , ,5 125 VS 3/19 RW ,5 138 VS 3/2 RW , , ,5 14,5 = Pup available in R (AISI 94L) version L2 Lt /21 28

29 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg 1,7 1,5 1,3 1,1,9,7 HP ft kw /h 1,3 % 1,1,9,7, /h p/stg 29 rp 8" otor p/stg 285 rp 6" otor Efficiency l /in Capacity U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 29

30 VS 3 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 3/21 E ,5 136, ,5 136,5 VS 3/22 E ,5 3279, ,5 138,5 VS 3/23 E ,5 136, ,5 14,5 VS 3/24 E ,5 345, ,5 142,5 VS 3/25 E ,5 392, ,5 199 VS 3/26 E ,5 1421, ,5 21 VS 3/27 E ,5 491, ,5 23 VS 3/28 E ,5 4176, ,5 25 VS 3/29 E ,5 1421, ,5 27 VS 3/3 E ,5 4347, ,5 29,5 VS 3/31 E ,5 224,5 VS 3/32 E , , ,5 227,5 VS 3/33 E ,5 229,5 VS 3/34 E , , ,5 231,5 VS 3/35 E , , ,5 234 Rp 3" L1 PUMPS WITH REWINABLE MOTOR Pup odel type R vers. Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 3/21 RW , , ,5 142,5 VS 3/22 RW ,5 154,5 VS 3/23 RW , , ,5 156,5 VS 3/24 RW ,5 158,5 VS 3/25 RW ,5 168 VS 3/26 RW , , ,5 17 VS 3/27 RW ,5 172 VS 3/28 RW ,5 174 VS 3/29 RW , , ,5 176 VS 3/3 RW ,5 178,5 VS 3/31 RW ,5 VS 3/32 RW , , ,5 VS 3/33 RW ,5 VS 3/34 RW , , ,5 VS 3/35 RW , , L2 Lt = Pup available in R (AISI 94L) version /21 3

31 PERFORMANCE CURVES 5HZ Total Head ft ,7 HP kw ,3 3/h NPSH Power/stg 1,5 1,3 1,1,9,7 ft ,1,9,7, /h p/stg 29 rp 8" otor p/stg 285 rp 6" otor ³/h % 8 6 Efficiency l /in Capacity U.S.gp /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 31

32 VS 3 High Pressure 5Hz PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 3/36 E ,5 237 VS 3/37 E , , ,5 239 VS 3/38 E ,5 19,5 27,5 VS 3/39 E ,5 19,5 272,5 VS 3/4 E , ,5 19,5 19,5 275 VS 3/41 E ,5 19,5 276 VS 3/42 E , ,5 19,5 19,5 277 VS 3/43 E , ,5 19,5 19,5 278 Rp 3" PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 3/36 E ,5 237 VS 3/37 E , , ,5 239 VS 3/38 E ,5 19,5 27,5 VS 3/39 E ,5 19,5 272,5 VS 3/4 E , ,5 19,5 19,5 275 VS 3/41 E ,5 19,5 276 VS 3/42 E , ,5 19,5 19,5 277 VS 3/43 E , ,5 19,5 19,5 278 L2 L /21 Lt 32

33 PERFORMANCE CURVES 5HZ ft Total Head NPSH P 7 1,7 1,5 1,3 1,1,9, HP ft 2 kw ,3 % 1,1,9,7, p/stg 29 rp 8" otor p/stg 285 rp 6" otor Efficiency Capacity /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 33

34 VS 46 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 46/2 E , ,5 142,5-31 VS 46/3 E4 4 5,5 77, ,5 142,5-36,5 VS 46/4 E4 5,5 7,5 821,5 652, ,5-45,5 VS 46/5 E4 7, ,5 73, ,5-52,5 VS 46/2 E6 4 5,5 591, , ,5 51 VS 46/3 E6 4 5,5 75, , ,5 53,5 VS 46/4 E6 5,5 7,5 819,5 614, ,5 6 VS 46/5 E6 7, , , ,5 66,5 VS 46/6 E6 9,3 12, ,5 1725, ,5 71,5 VS 46/7 E6 9,3 12, ,5 1839, ,5 74 VS 46/8 E ,5 8 VS 46/9 E ,5 88,5 VS 46/1 E ,5 91 VS 46/11 E ,5 93,5 VS 46/12 E6 18, ,5 841, ,5 13 VS 46/13 E6 18, ,5 841, ,5 15,5 VS 46/14 E6 18, ,5 841, ,5 18,5 VS 46/15 E ,5 96, ,5 117 VS 46/16 E ,5 392, ,5 119,5 VS 46/17 E ,5 326, ,5 122 VS 46/18 E ,5 345, ,5 139,5 VS 46/19 E ,5 136, ,5 142 VS 46/2 E ,5 136, ,5 144,5 VS 46/21 E ,5 3791, ,5 147 VS 46/22 E ,5 395, ,5 149,5 VS 46/23 E ,5 419, ,5 152,5 VS 46/24 E ,5 1421, ,5 29 VS 46/25 E ,5 1421, ,5 211,5 VS 46/26 E ,5 4745, ,5 214 Rp 3" L1 Lt PUMPS WITH REWINABLE MOTOR Pup odel type R vers. Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 46/2 RW6 4 5,5 591, , ,5 61,5 VS 46/3 RW6 4 5,5 75, , ,5 64 VS 46/4 RW6 5,5 7,5 819, , ,5 67 VS 46/5 RW6 7, , , ,5 71,5 VS 46/6 RW6 9,3 12, ,5 77 VS 46/7 RW6 9,3 12, ,5 79,5 VS 46/8 RW ,5 85 VS 46/9 RW , ,5 93 VS 46/1 RW , ,5 95,5 VS 46/11 RW ,5 13 VS 46/12 RW6 18, , , ,5 19,5 VS 46/13 RW6 18, , , ,5 112 VS 46/14 RW6 18, , , ,5 115 VS 46/15 RW , , ,5 126,5 VS 46/16 RW ,5 129 VS 46/17 RW ,5 131,5 VS 46/18 RW ,5 145,5 VS 46/19 RW , , ,5 148 VS 46/2 RW , , ,5 16,5 VS 46/21 RW ,5 163 VS 46/22 RW ,5 165,5 VS 46/23 RW ,5 168,5 VS 46/24 RW , , ,5 178 VS 46/25 RW , , ,5 18,5 VS 46/26 RW ,5 183 = Pup available in R (AISI 94L) version /21 L2 34

35 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg HP 1,8 1,7 1,6 1,5 1,4 1,3 ft kw 1,4 % p/stg 29 rp 8" otor 1,3 1 1,2 1,1 1, p/stg 285 rp 6" otor Efficiency Capacity /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 35

36 VS 46 High Pressure 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 46/27 E ,5 4859, ,5 217,5 VS 46/28 E ,5 4973, ,5 22 VS 46/29 E , , ,5 236,5 VS 46/3 E , , ,5 239 VS 46/31 E , , ,5 242 VS 46/32 E ,5 244,5 VS 46/33 E ,5 247 VS 46/34 E ,5 19,5 279 VS 46/35 E ,5 19,5 281,5 VS 46/36 E , ,5 19,5 19,5 284,5 VS 46/37 E , ,5 19,5 19,5 287 VS 46/38 E , ,5 19,5 19,5 289,5 VS 46/39 E , ,5 19,5 19,5 292 VS 46/4 E , ,5 19,5 19,5 295 Rp 3" L1 PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 46/27 RW ,5 186,5 VS 46/28 RW ,5 189 VS 46/29 RW , , ,5 VS 46/3 RW , , VS 46/31 RW , , VS 46/32 RW ,5 VS 46/33 RW VS 46/34 RW VS 46/35 RW ,5 VS 46/36 RW , , ,5 VS 46/37 RW , , VS 46/38 RW , , ,5 VS 46/39 RW , , VS 46/4 RW , , Lt L /21 36

37 PERFORMANCE CURVES 5HZ ft 6 Total Head NPSH Power/stg HP 1,8 1,7 1,6 1,5 1,4 1,3 ft kw 1,4 % p/stg 29 rp 8" otor 1,3 1 1,2 1,1 1, p/stg 285 rp 6" otor Efficiency Capacity /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 37

38 VS 65 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 65/2 E4 3, , ,5 142,5-33 VS 65/3 E4 5,5 7,5 77,5 652, ,5-43 VS 65/4 E4 7, ,5 73, ,5-49,5 VS 65/2 E6 4 5,5 591, , ,5 51 VS 65/3 E6 5,5 7,5 75,5 614, ,5 57 VS 65/4 E6 7, , , ,5 64 VS 65/5 E6 9,3 12,5 933,5 678, ,5 69 VS 65/6 E ,5 75 VS 65/7 E ,5 83 VS 65/8 E ,5 86 VS 65/9 E ,5 88,5 VS 65/1 E6 18, ,5 2344, ,5 98 VS 65/11 E6 18, ,5 2458, ,5 1,5 VS 65/12 E ,5 96, ,5 19 VS 65/13 E ,5 96, ,5 112 VS 65/14 E ,5 136, ,5 129 VS 65/15 E ,5 136, ,5 131,5 VS 65/16 E ,5 3222, ,5 134 VS 65/17 E ,5 3336, ,5 137 VS 65/18 E ,5 3835, ,5 193,5 VS 65/19 E ,5 1421, ,5 196 VS 65/2 E ,5 1421, ,5 198,5 VS 65/21 E ,5 4176, ,5 21,5 VS 65/22 E ,5 218 VS 65/23 E ,5 22,5 VS 65/24 E , , ,5 223 VS 65/25 E , , ,5 225,5 VS 65/26 E ,5 228,5 Rp 3" for I and N versions Rp 4" for R version L1 Lt PUMPS WITH REWINABLE MOTOR Pup odel type R vers. Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 65/2 RW6 4 5,5 591, , ,5 61,5 VS 65/3 RW6 5,5 7,5 75, , ,5 64 VS 65/4 RW6 7, , , ,5 69 VS 65/5 RW6 9,3 12,5 933, , ,5 74,5 VS 65/6 RW ,5 8 VS 65/7 RW , ,5 87,5 VS 65/8 RW ,5 95,5 VS 65/9 RW ,5 98 VS 65/1 RW6 18, ,5 14,5 VS 65/11 RW6 18, ,5 17 VS 65/12 RW , , ,5 118,5 VS 65/13 RW , , ,5 121,5 VS 65/14 RW , , ,5 135 VS 65/15 RW , , ,5 137,5 VS 65/16 RW ,5 15 VS 65/17 RW ,5 153 VS 65/18 RW ,5 162,5 VS 65/19 RW , , ,5 165 VS 65/2 RW , , ,5 167,5 VS 65/21 RW ,5 17,5 VS 65/22 RW ,5 VS 65/23 RW ,5 VS 65/24 RW , , VS 65/25 RW , , ,5 VS 65/26 RW = Pup available in R (AISI 94L) version L /21 38

39 PERFORMANCE CURVES 5HZ Total Head ft NPSH Power/stg HP 2,5 2,3 2,1 1,9 1,7 1,5 ft kw ,9 % 1,7 1,5 1,3 1, p/stg 29 rp 8" otor p/stg 285 rp 6" otor Efficiency Capacity /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 39

40 VS 65 High Pressure 5Hz PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 65/27 E ,5 19,5 261 VS 65/28 E ,5 19,5 263,5 VS 65/29 E , ,5 19,5 19,5 266 VS 65/3 E , ,5 19,5 19,5 268,5 VS 65/31 E , ,5 19,5 19,5 271,5 Rp 3" PUMPS WITH REWINABLE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 65/27 RW VS 65/28 RW ,5 VS 65/29 RW , , VS 65/3 RW , , ,5 VS 65/31 RW , , ,5 L2 L /21 Lt 4

41 PERFORMANCE CURVES 5HZ 15 ft Total Head NPSH Power/stg 4 HP 2,5 2,3 2,1 1,9 1,7 1,5 ft kw ,9 % 1,7 1,5 1,3 1, p/stg 29 rp 8" otor p/stg 285 rp 6" otor Efficiency Capacity /21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 41

42 42

43 VS Series Pup Section and List of Main Coponents VS

44 Pup section and List of Main coponents VS Ref. N. escription 1. ischarge head and screw 1.1 Valve 1.2 O-ring 1.3 Screws and outer case locking nuts 1.4 Valve support 1.5 Seeger ring 2. Outer case 2.1 Suction strainer 2.2 Cable guard and screws 2.3 Initial spacer 2.4 Flange and bolts 2.5 Motor adapter 2.6 4" otor flange / coupling adapter 3. Pup shaft 3.1 Coupling 3.2 Upper up-thrust washer 3.3 Lower up-thrust washer 3.4 Upper journal sleeve 3.5 Screw and washer 3.6 Up-thrust ring 3.7 Lower spacer 3.8 Upper spacer 4. iffusers 4.1 Secondary bearing bush 4.2 Floating neck ring 4.4 Bearing bush 4.5 Upper bearing guide 4.6 First diffuser 4.7 iffuser with upper up-thrust washer 4.8 Last diffuser 5. Ipeller 51.1 Ipeller spacer 5.5 Wear ring / /21 44

45 Pup section and List of Main coponents VS Ref. N. escription 1. ischarge head and screw 1.1 Valve 1.2 O-ring 1.3 Screws and outer case locking nuts 1.4 Valve support 1.5 Seeger ring 2. Outer case 2.1 Suction strainer 2.2 Cable guard and screws 2.3 Initial spacer 2.4 Flange and bolts 2.5 Motor adapter 2.6 4" otor flange / coupling adapter 2.7 8" otor adapter / bolts and washer 3. Pup shaft 3.1 Coupling 3.3 Lower up-thrust washer 3.4 Upper journal sleeve 3.5 Screw and washer 3.6 Up-thrust ring 4. iffusers 4.1 Secondary bearing bush 4.2 Floating neck ring 4.3 Flange claping neck ring 4.4 Bearing bush 4.5 Last / interediate diffuser 5. Ipeller 51.1 Split cone 51.2 Split cone nut 51.3 Interediate split cone nut 51.6 Up-thrust split cone nut 5.5 Wear ring 51.5 Interediate ipeller with screw / /21 45

46 Appendix A Motor adaptor VS MOTOR AAPTER FOR I AN N VERSION 6 MOTOR AAPTER FOR I AN N VERSION Ø1 ±,1 Ø15 ±,3 Ø76,2 ±,1 Ø87,3 +,11 +,6 Ø135 3 ±,1 14, /21 Ø76,2 +,8 +,3 Ø111,2 ±,8 Ø135 7,5 +,3 + 12,3 46

47 Appendix A Motor adaptor VS MOTOR AAPTER FOR I AN N VERSION 6 MOTOR AAPTER FOR I, N AN R VERSION Ø1 ±,1 Ø15 ±,3 Ø76,2 ±,1 Ø87,3 +,11 +,6 Ø135 3 ±,1 14, /21 Ø76,2 +,8 +,3 Ø111,2 ±,8 Ø135 7,5 +, /21 8 MOTOR AAPTER FOR I AN N VERSION Ø17,5 ±,3 Ø127 +,12 +,4 Ø152,4 ±,8 Ø187,5 8 +, /21 47

48 48

49 VS Series Stainless Steel Subersible Pups for 8 deep wells and larger 5 Hz VS

50 VS Series 8 Stainless Steel Subersible Pups APPLICATIONS Municipal water works Water distribution and pressure boosting Irrigation and sprinkler systes, water treatent plants, filtration and reverse ososis Industrial cooling and processing Mining industry, drainage and dewatering Fire-fighting equipent Fountains FEATURES Stainless steel coponents for durability and robustness, to increase run-tie and trouble-free operation. Many design technical features ake this pup range very copact and extreely reliable External stainless steel sleeve to iprove stiffness and assure peranent alignent of all the coponents Motor adapter and discharge head ay be reoved without disturbing the ipeller / diffuser stack Built-in check valve and over size pup shaft Very copact and extreely reliable to resist to the ost coplex and severe conditions Easy aintenance without the need of special tools PUMP SPECIFICATIONS Capacities up to 12 3/h at 5Hz 5 Bar (5 ) at 5 Hz Maxiu allowable aount of sand 1 gr/3 Water teperature: Miniu: -5 C to 6 C Maxiu: +6 C for I (A34) version / + 9 C for N (A316) and R (94L) versions Rotation: counter clockwise when looking into the discharge Pup can work continuously in vertical or horizontal position MOTOR SPECIFICATIONS Motor adapter in copliance with NEMA standard Motors: see section Subersible Motors Product Overview AVAILABLE ON REQUEST Pup aterial: 316 Stainless steel (N) version (IN/EN 1.441) 94L (R) version (IN/EN ) See specified aterial variant in Materials/fluids copatibility table on page 5 ouble cable guard Rp 4 for I and N versions Rp 6 for R version 5

51 U.S. gp Hz 225 ft VS 78 VS ( 3 /h) PUMP IENTIFICATION COE / / VS I M8 Rp B1 P HP S Pup speciality: P (passivated); T (High teperature); HP (High pressure); S (double cable guard) Bearings bush aterial: B1 (NBR); V1: FKM Pup power at 6Hz Pup power at 5Hz ischarge head (threaded type and diension): Rp(X); NPT(X) Motor coupling diension: M4 (4"); M6 (6"); M8 (8") Material: I (AISI34); N (AISI316); R (AISI94L) Nuber of stages Noinal flow in 3/h Pup size 8: 8" Pups odel /216 Versions Motor power range Type I N R (kw) EN EN EN I AN N R VS78 7, VS97 9, = Version available = Version available only with 6 otor coupling 51

52 MATERIALS/FLUIS COMPATIBILITY Pos. PARTS ESCRIPTIONS Type MATERIAL I version N version R version AISI IN / EN AISI IN / EN AISI IN / EN 1. ischarge head Stainless steel L Valve Stainless steel Sealing O-ring NBR NBR NBR 1.3 Outer case locking nuts Stainless steel /94L / Valve support Stainless steel and PTFE L Seeger ring Stainless steel L Spring Stainless steel Outer case Stainless steel Suction strainer Stainless steel L Cable guard Stainless steel L Initial spacer Stainless steel L Flange and screws Stainless steel L / Motor adapter Stainless steel L Pup shaft Stainless steel Coupling Stainless steel 431/ / / / /94L / Upper up-thrust washer Stainless steel Lower up-thrust washer Stainless steel Upper journal sleeve (1) Stainless steel with ceraic casting Screw and washer Stainless steel L/ / Up-thrust ring PTFE + Graphite iffuser Stainless steel L Secondary bearing bush NBR NBR NBR 4.2 Floating neck ring PTFE Flange claping neck ring Stainless steel L Ipeller Stainless steel L Split cone Stainless steel Split cone nut Stainless steel

53 VS 78 TABLE OF HYRAULIC PERFORMANCES AT 5Hz PUMP TYPE R Vers. RATE POWER Q = ELIVERY 3/h l/in kw HP H = TOTAL HEA METERS COLUMN OF WATER [] VS 78/2 7, VS 78/ VS 78/ VS 78/5 18, VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ VS 78/ = Pup available in R (AISI 94L) version VS 97 TABLE OF HYRAULIC PERFORMANCES AT 5Hz PUMP TYPE R Vers. RATE POWER Q = ELIVERY 3/h l/in kw HP H = TOTAL HEA METERS COLUMN OF WATER [] VS 97/2 9,3 12, VS 97/ VS 97/4 18, VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ VS 97/ = Pup available in R (AISI 94L) version 53

54 VS 78 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 78/2 E6 7, VS 78/3 E VS 78/4 E VS 78/5 E6 18, ,5 1863, VS 78/6 E ,5 254, VS 78/7 E ,5 231, VS 78/8 E ,5 2436, VS 78/9 E ,5 2562, VS 78/1 E VS 78/11 E VS 78/12 E VS 78/13 E VS 78/14 E VS 78/15 E VS 78/16 E VS 78/17 E VS 78/18 E VS 78/19 E VS 78/2 E VS 78/21 E VS 78/22 E VS 78/23 E VS 78/24 E Rp 5" L1 Lt PUMPS WITH REWINABLE MOTOR Pup odel type R vers. Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 78/2 6RW 7, VS 78/3 6RW VS 78/4 6RW VS 78/5 VS 78/6 VS 78/7 VS 78/8 VS 78/9 VS 78/1 VS 78/11 6RW 18, RW ,5 19 6RW RW , RW RW , RW RW ,5 23 6RW RW ,5 28 6RW RW , RW RW ,5 218 VS 78/12 8RW ,5 238 VS 78/13 8RW ,5 266 VS 78/14 8RW ,5 271 VS 78/15 8RW ,5 276 VS 78/16 8RW ,5 3 VS 78/17 8RW ,5 35 VS 78/18 8RW ,5 31 VS 78/19 8RW ,5 332 VS 78/2 8RW ,5 336 VS 78/21 8RW ,5 341 VS 78/22 8RW ,5 378 VS 78/23 8RW ,5 383 VS 78/24 8RW ,5 388 = Pup available in R (AISI 94L) version L /21 54

55 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg HP 4,7 4,4 4,1 3,8 3,5 3,2 ft kw /h 3,6 % 3,3 3, 2,7 2, /h p/stg 29 rp 8" otor p/stg 285 rp 6" otor /h Efficiency Capacity l /in U.S.gp 117 7/21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 55

56 VS 97 5Hz Technical ata PUMPS WITH ENCAPSULATE MOTOR Pup odel type Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 97/2 E6 9,3 12, ,5 1322, VS 97/3 E VS 97/4 E6 18, ,5 1737, VS 97/5 E ,5 1928, ,5 VS 97/6 E ,5 2184, VS 97/7 E ,5 231, VS 97/8 E VS 97/9 E VS 97/1 E VS 97/11 E VS 97/12 E VS 97/13 E VS 97/14 E VS 97/15 E VS 97/16 E VS 97/17 E ,5 VS 97/18 E ,5 VS 97/19 E ,5 VS 97/2 E VS 97/21 E VS 97/22 E VS 97/23 E Rp 5" L1 PUMPS WITH REWINABLE MOTOR Pup odel type R vers. Motor iensions Type kw HP L1 [] L2 [] Lt [] 1 cable 2 cable Weight Pup [Kg] VS 97/2 6RW 9,3 12, ,5 VS 97/3 6RW 13 17, ,5 VS 97/4 6RW 18, ,5 VS 97/5 VS 97/6 VS 97/7 VS 97/8 VS 97/9 6RW RW , RW RW , RW RW , RW RW ,5 23 6RW RW ,5 28 VS 97/1 8RW ,5 228 VS 97/11 8RW ,5 256 VS 97/12 8RW ,5 261 VS 97/13 8RW ,5 266 VS 97/14 8RW ,5 29 VS 97/15 8RW ,5 295 VS 97/16 8RW ,5 317 VS 97/17 8RW ,5 321,5 VS 97/18 8RW ,5 358,5 VS 97/19 8RW ,5 363,5 VS 97/2 8RW ,5 368 VS 97/21 8RW ,5 373 = Pup available in R (AISI 94L) version L2 Lt /21 56

57 PERFORMANCE CURVES 5HZ ft Total Head NPSH Power/stg HP 5,7 5,3 4,9 4,5 4,1 3,7 ft /h kw 4,3 % p/stg 29 rp 3,9 8" otor 1 3,5 3,1 2, /h p/stg 285 rp 6" otor /h 8 6 Efficiency Capacity l /in U.S.gp 117 7/21 The hydraulic characteristics are guaranteed, according to ISO standard 996:212, grade 3B 57

58 Pup section and List of Main coponents VS (1) (1) Ref. N. escription 1. ischarge head 1.1 Valve 1.2 Sealing O-ring 1.3 Outer case locking nuts 1.4 Valve support 1.5 Seeger ring 1.6 Spring 2. Outer case 2.1 Suction strainer 2.2 Cable guard 2.3 Initial spacer 2.4 Flange 2.5 Motor adapter 3. Pup shaft 3.1 Coupling 3.2 Upper up-thrust washer 3.3 Lower up-thrust washer 3.4 Upper journal sleeve 3.5 Screw and washer 3.6 Up-thrust ring 4. iffuser 4.1 Secondary bearing bush 4.2 Floating neck ring 4.3 Flange claping neck ring 5. Ipeller 5.1 Split cone 5.2 Split cone nut 1) only for types with ore than 8 stages /212 58

59 Appendix B Motor adaptor VS MOTOR AAPTER FOR I AN N VERSION 6 MOTOR AAPTER FOR I AN N VERSION Ø15 ±,3 Ø17,5 ±,3 Ø76,2 +,8 +,3 Ø111,2 ±,8 Ø17,5 8 ±, /211 Ø127 +,12 +,4 Ø152,4 ±,8 Ø188 8 ±, /211 59

60 6

61 Subersible Motors Product Overview 61

62 E4 4 - Super Stainless Three-phase SUBMERSIBLE MOTORS Quality in the Well Franklin Electric 4 encapsulated subersible otors, built in ISO 91/141 certified facilities for outstanding perforance in 4 or larger water wells. The three phase otor offers axiu life and highest efficiency under various load conditions. It should ideally be cobined to the Franklin Electric SubStart/SubTronic3P control boxes for axiu syste perforance, protection and warranty FEATURES Heretically sealed stator. Anti track, self healing stator resin prevents otor burn out, echanically supports the winding and provides fast heat dissipation High efficiency electrical design (low operation cost, cool running winding) Reovable water bloc lead connector No-wear, water lubricated radial and thrust bearings for 1% aintenance free operation Non-containating FES 93 filling liquid Various agency approvals for use in drinking water BRACKISH WATER VERSION SPECIFICATIONS For use in water that has ore salinity than fresh water, but not as uch as seawater The novel Franklin Electric Brackish Water Motor proposes a cost-effective solution wherever standard 4 otors are not giving sufficient service life POLLUTION RECOVERY MOTOR-VERSION SPECIFICATIONS Fluorelastoere (Viton ) rubber parts Special Polyuretane (PUR) lead asseblies 34 graded stainless steel as standard, 316SS as an option TECHNICAL SPECIFICATION (Standard otor) 3 phase otor range:,25 9,3kW 4 NEMA flange Rotation: reversible egree of protection: IP68, Insulation: Cl.B Rated abient teperature: 3 C Required cooling flow: in.,8/s Max. starts/hr.: 2, equally distributed Mounting: vertical to horizontal, shaft upwards Voltage tolerance 5Hz fro noinal: -1% / +6% (6Hz: ±1%) Protection requireents: EN HEAT PUMP MOTOR-VERSION SPECIFICATIONS Many odern heating systes extract heat that is stored in aquifer / river water. Such so-called two-pit or open systes require low-power, high efficiency 3-phase subersible otors. To eet the deands of this niche arket, Franklin Electric has developed a special 4 encapsulated subersible otor range optiized for shallow settings and low power consuption available fro,25kw to 1,1kW. OPTIONS Motor cable VE / ACS / KTW approved (1,5; 2,5; special lengths available) Special Polyuretane (PUR) lead asseblies Motors with factory- installed lead in Single Packing Special voltages on request Motor coplete in AISI 316SS with SiC seal 3~ 4 ENCAPSULATE MOTORS - 4V / 5Hz P N [kw] Thrust F [N] U N [V] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg], ,68 3,67 7,77,83 2,5 214,2 7,2, ,1 5,4 66,74 1,22 3, 214,2 7,2, ,6 7,4 68,74 1,82 4,2 228,2 7,7, , 1,6 7,77 2,49 6,7 248,2 8,7 1, ,8 16, 74,78 3,67 11,33 282,6 1,2 1, ,9 2,7 73,78 5, 14,1 36,6 11,2 2, ,5 29,8 75,77 7,37 22, 338,6 12,6 3, 65* ,5 29,8 75,77 7,37 22, 422,2 15, ,5 42, 76,77 1,6 31,93 393,6 15, 65* ,5 42, 76,77 1,6 31,93 477,2 17, 3,7 65* , 52,3 78,78 12,5 41,5 52,2 19,1 4, 65* ,9 57, 78,77 13,4 44, 543,2 2, 5,5 65* ,6 77,2 79,81 18,3 56,5 652,5 26,6 7,5 65* ,1 99,3 79,81 25,1 73,1 73,5 33,1 9,3 65* ,4 96,9 79,86 31,1 45, 855,1 38,8 * High Thrust Version 62

63 ENG4 4 NextGen - Super Stainless Three-phase SUBMERSIBLE MOTORS Quality in the Well Franklin Electric 4 encapsulated subersible otors, built in ISO 91/141 certified facilities for outstanding perforance in 4 or larger water wells.the three phase otor offers axiu life and highest efficiency under various load conditions. It should ideally be cobined to the Franklin Electric SubStart/SubTronic3P control boxes for axiu syste perforance, protection and warranty. FEATURES Heretically sealed stator with 316SS shell. Anti track, self healing stator resin prevents otor burn out, echanically supports the winding and provides fast heat dissipation High efficiency electrical design (low operation cost, cool running winding) Reovable water bloc lead connector No-wear, water lubricated radial and thrust bearings for 1% aintenance free operation Non-containating FES 93 filling liquid Various agency approvals for use in drinking water BRACKISH WATER VERSION SPECIFICATIONS For use in water that has ore salinity than fresh water, but not as uch as seawater The novel Franklin Electric Brackish Water Motor proposes a cost-effective solution wherever standard 4 otors are not giving sufficient service life POLLUTION RECOVERY MOTOR-VERSION SPECIFICATIONS Fluorelastoere (Viton ) rubber parts Special Polyuretane (PUR) lead asseblies 34 graded stainless steel as standard, 316SS as an option TECHNICAL SPECIFICATION (Standard otor) 3 phase otor range:,37 3kW 4 NEMA flange Rotation: reversible egree of protection: IP68 Insulation: Cl.B Rated abient teperature: 3 C Required cooling flow: in.,8/s Max. starts/hr.: 2, equally distributed Mounting: vertical to horizontal, shaft upwards Voltage tolerance 5Hz fro noinal: -1% / +6% Protection requireents: EN HEAT PUMP MOTOR-VERSION SPECIFICATIONS Many odern heating systes extract heat that is stored in aquifer / river water. Such so-called two-pit or open systes require low-power, high efficiency 3-phase subersible otors. To eet the deands of this niche arket, Franklin Electric has developed a special 4 encapsulated subersible otor range optiized for shallow settings and low power consuption available fro,25kw to 1,1kW. OPTIONS Built in lightning arrestors Motors in full 316SS Various cable lengths Special voltages Alternative aterial executions Ø87,32 Ø87,25 Ø27, Full Spline 12,7 in. 38,3 38, ,5-2, 6, 3~ 4 ENCAPSULATE MOTORS NEXTGEN - 4V / 5Hz P N [kw] Thrust F [N] U N [V] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg], ,1 5,41 66,74 1, ,2 6,5, ,6 7,4 68,74 1,82 4,2 251,1 6,65, ,6 7,77 2,49 6,7 271,2 7,55 1, , ,78 3,67 11,33 297,2 8,8 1, ,9 2,7 73, ,1 321,2 9,75 2, ,5 29,8 75,77 7, ,2 11, , ,77 1,6 31,93 48,2 13,8 ax. Ø95,25 63

64 E6 6 - Encapsulated Motors SUBMERSIBLE MOTORS Quality in the Well These 6 encapsulated otors, anufactured in ISO 91 certified facilities, are built for dependable operation in 6 diaeter or larger water wells.water lubricated thrust and radial bearings enable a aintenance free operation. A special diaphrag ensures pressure copensation inside the otor.the otor is filled with a special FES91 fluid, providing frost protection down to -15ºC storage teperture. The Sand fighter SiC seal syste is standard. FEATURES Heretically sealed stator, anti track, self healing stator resin prevents otor burn out 37 and 45kW up to 5 C abient teperature Reovable water bloc lead connector Cable aterial according to drinking water regulations (KTW approved) Sand fighter Motor with SiC-Mechanical Seal High efficiency electrical design for low operation cost All otors prefilled and 1% tested Max. storage teperature -15 C C Non containating FES91 -filling 45kN High Thrust Version on request (standard in 37kW and 45kW otors) TECHNICAL SPECIFICATION (Standard otor) 4-45 kw 6 NEMA flange Protection: IP 68 Insulation: Class F Starts per hour: 2 Installation: vertical/horizontal Standard Voltage: V/5Hz, 46V/6Hz Voltage tolerance 5Hz: -1% / +6% UN [38-415V=(38-1%) (415+6%)] Voltage tolerance 6Hz: ±1%UN Motor protection: Select theral overloads according to IN Y - start (pos. of cables 9 ) Sand fighter Motor with SiC-Mechanical Seal Rated abient teperature: 4-3kW up to 3 C; 37 & 45 kw up to 5 C Cooling flow: in.,16 /s Motor lead in 4 length (KTW approved) OPTIONS Other voltages 45kN High Thrust Version on request (standard in 37kW and 45kW otors) PT 1 teperature sensor (sold separately) Special Lead lengths up to 5 Built-in PTC teperature sensor Built-in SubMonitor Transitter (standard for 37&45kW) Ø 137,7 6 ENCAPSULATE MOTORS STANAR - 3~/ 4 V / 5 Hz P N [kw] Thrust F [N] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg] , ,82 12,3 2,2 581,2 37,5 5, , ,82 18, ,4 41,1 7, , ,7 646,2 45,2 9, , ,8 31,1 68,2 678,7 47, , ,85 37,3 78,3 711,2 5, , ,85 49,9 17,3 776,2 56,7 18, , ,85 62,4 154,6 841,5 63, , ,86 74,7 177,6 96,5 69, , ,84 99,4 263,1 136,6 83, ,85 123,6 28,8 1476, , ,84 148,4 332,3 1629,

65 E6HT 6 - Encapsulated Motors HighTep 9 C SUBMERSIBLE MOTORS Quality in the Well These 6 encapsulated otors, anufactured in ISO 91 certified facilities, are built for dependable operation in 6 diaeter or larger water wells with abient teperature up to 9 C. Water lubricated thrust and radial bearings enable a aintenance free operation. A special diaphrag ensures pressure copensation inside the otor. The otor is filled with a special FES92 fluid, providing frost protection down to -15ºC storage teperture. The Sand fighter SiC seal syste is standard. FEATURES Up to 9 C abient teperature Increase thrust capacity up to 3 C No cooling flow in larger wells (12 / open reservoirs) up to 3 C abient Heretically sealed encapsulated stator, anti track, self healing stator resin Reovable Water Bloc lead connector Sand fighter Motor with SiC-Mechanical Seal High efficiency electrical design for low operation cost All otors prefilled and 1% tested Max. storage teperature -15 C C High teperature leads Non containating FES92 -filling 45kN High Thrust version on request (standard in 22kW and 3kW otors) TECHNICAL SPECIFICATION (Standard otor) 3-15 kw / 3,7-3 kw 6 NEMA double flange Protection: IP 68 Insulation: Class F Starts per hour: 2 Installation: vertical/horizontal Standard Voltage: V/5Hz, 46V/6Hz Voltage tolerance 5Hz: -1% / +6% UN [38-415V=(38-1%) (415+6%)] Voltage tolerance 6Hz: ±1%UN Motor protection: Select theral overloads according to IN Rated abient teperature: 9 C Cooling flow: in.,16 /s OL / Y - start (pos. of cables 9 ) Motor lead in 4 length OPTIONS Built in lightning arrestors Motors in full 316SS Various cable lengths Special voltages Alternative aterial executions 23,88 Full Spline 25,4 25,38 76,2 76,12 6,35 6,1 73,3 72,87 6 ENCAPSULATE MOTORS NEXTGEN - 3~/4V / 5Hz P N [kw] Thrust F [N] U N [V] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg] 3, ,5 52,5 75,86 12,3 31, , , ,3 48, , ,9 76, ,2 16 8,82 36,6 111, ,83 49,9 161, , , ,82 61,5 227, , , ,82 98, , ,2 IA. MAX. L 65

66 E8 8 - Encapsulated Motors SUBMERSIBLE MOTORS Quality in the Well These 8 encapsulated otors, anufactured in ISO 91 certified facilities, are built for dependable operation in 8 diaeter or larger water wells. It is fitted with water lubricated radial and thrust bearings for aintenance-free operation. A special diaphrag ensures pressure copensation inside the otor. The otor is filled with a special FES91 fluid, providing frost protection down to -15ºC storage teperture.the Sand fighter SiC seal syste is the option for sandy applications. FEATURES Heretically sealed stator, anti track, self healing stator resin prevents otor burn out Reovable Water Bloc lead connector Cable aterial according to drinking water regulations (KTW approved) Sand slinger and Mechanical seal for high perforance in sand High efficiency electrical design for low operation cost All otors prefilled and 1% tested Max. storage teperature -15 C C Non containating FES91 -filling TECHNICAL SPECIFICATION (Standard otor) 3-15 kw 8 NEMA flange Protection: IP 68 Insulation: Class F Starts per hour: 1 Installation: vertical/horizontal Standard Voltage: V/5Hz, 46V/6Hz Voltage tolerance 5Hz: -1% / +6% UN [38-415V=(38-1%) (415+6%)] Voltage tolerance 6Hz: ±1%UN Motor protection: Select theral overloads according to IN OL / Y - start (pos. of cables 9 ) Rated abient teperature: 4-3kW up to 3 C; 37 & 45 kw up to 5 C Cooling flow: in.,16 /s Built-in Subtrol Heat Sensor Motor lead in 4 length (KTW approved) OPTIONS Other voltages Motors coplete in 316 SS PT 1 teperature sensor (sold separately) Sand fighter Motor with SiC- Mechanical seal 8 ENCAPSULATE MOTORS STANAR - 3~/ 4 V / 5 Hz P N [kw] Thrust F [N] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg] , , , , , , , , ,

67 E8HT 8 - Encapsulated Motors HighTep 75 C SUBMERSIBLE MOTORS Quality in the Well These 8 encapsulated otors, anufactured in ISO 91 certified facilities, are built for dependable operation in 8 diaeter or larger water wells. It is fitted with water lubricated radial and thrust bearings for aintenance-free operation. A special diaphrag ensures pressure copensation inside the otor. The otor is filled with a special FES91 fluid, providing frost protection down to -15ºC storage teperture.the Sand fighter SiC seal syste is the option for sandy applications. FEATURES Up to 75 C abient teperature Increast thrust capacity up to 3 C No cooling flow in larger wells (open reservoirs) up to 3 C abient Heretically sealed encapsulated stator, anti track, self healing stator resin Reovable Water Bloc lead connector Sand fighter Motor with SiC-Mechanical Seal High efficiency electrical design for low operation cost All otors prefilled and 1% tested. Max. storage teperature -15 C C High teperature leads Non containating FES 92 filling TECHNICAL SPECIFICATION (Standard otor) 3-11 kw 8 NEMA flange Protection: IP 68 Insulation: Class F Starts per hour: 1 Installation: vertical/horizontal Standard Voltage: V/5Hz, 46V/6Hz Voltage tolerance 5Hz: -1% / +6% UN [38-415V=(38-1%) (415+6%)] Voltage tolerance 6Hz: ±1%UN Motor protection: Select theral overloads according to IN OL / Y - start (pos. of cables 9 ) Rated abient teperature: 75 C Cooling flow: in.,16 /s Motor lead in 4 length OPTIONS Other voltages Motors coplete in 316 SS Motor lead in 8 length 8 ENCAPSULATE MOTORS STANAR - 3~/ 4 V / 5 Hz P N [kw] Thrust F [N] U N [V] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg] , ,83 97, , , , , , , , ,

68 RW6 6 - Rewindable Motor SUBMERSIBLE MOTORS Quality in the Well These 6 rewindable otors, anufactured in ISO 91 certified facilities, are built for dependable operation in 6 diaeter or larger water wells. Water lubricated thrust and radial bearings enable a aintenance free operation. A special diaphrag ensures pressure copensation inside the otor. The otor is filled with a special FES93 fluid, providing frost protection down to -15ºC storage teperture. The Sand fighter SiC seal syste is the option for sandy applications. For applications in aggressive edia, otors ade of 316SS and 94L are available FEATURES Cable aterial according to drinking water regulations (KTW approved) Sand slinger and echanical seal for high perforance in sand High efficiency electrical design for low operation cost All otors prefilled and 1% tested Max. storage teperature -15 C C esign for retrofitable PT1 sensor Approved Franklin Electric Kingsbury Type thrust bearing Non containating FES 93 -filling Sand fighter SiC seal syste is standard Standard otors in coplete 34SS TECHNICAL SPECIFICATION (Standard otor) 4-37 kw 6 NEMA flange with Studs (M 12) Protection: IP 68 Starts per hour: ax 2 Installation: vertical / horizontal (37 kw otors ay not be installed horizontally) Standard Voltage: V/5Hz, 46V/6Hz Voltage tolerance 5Hz: -1% / +6% UN [38-415V=(38-1%) (415+6%)] Voltage tolerance 6Hz: ±1%UN Motor protection: Select theral overloads according to IN Y - start (pos. of cables 9 ) Standard otor with PVC winding insulation (37kW in standard with PE2/PA insulation) for ax. abient tep. of 3ºC with a in.cooling flow: 4 kw - 15 kw v =,2 /s ; 18,5 kw - 37 kw v =,5 /s 6 REWINABLE MOTORS 3~ /4 V / 5 HZ P N [kw] Thrust F [N] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg] ,6 51,76,73 13,1 17, , ,3 51,76,81 18,2 17, , ,7 63,77,82 24,8 21, , ,4 78,78, ,2 98,79,83 36,4 35, ,6 125,8,81 42,8 5, ,1 148,81,83 49,4 6, , ,81,8 61,2 84, ,82,8 72,5 12, ,7 284,83,83 85,6 134, ,4 347,83,8 98, ,9 433,83,8 121,6 215, OPTIONS Other voltages Motors in coplete 316 SS and 94 L Motors up to 3kW with PE2/PA winding insulation for ax. abient tep. of 5 C at the sae cooling conditions as standard (37 kw ax. 45 ) PT 1 teperature sensor (sold separately) Lead in different lengths up to 5 Ø ,9 ±,1 L 68

69 RW8 8 - Rewindable Motor SUBMERSIBLE MOTORS Quality in the Well These 8 rewindable otors, anufactured in ISO 91 certified facilities, are built for dependable operation in 8 diaeter or larger water wells. It is fitted with water lubricated radial and thrust bearings for aintenance-free operation. The otor is filled with a special FES93 fluid, providing frost protection down to -15ºC storage teperture. A special diaphrag ensures pressure copensation inside the otor.the Sand fighter SiC seal syste is standard. For applications in aggressive edia, otors ade of 316SS and 94L are available. FEATURES Easy to asseble with double flange Cable aterial according to drinking water regulations (KTW approved) Sand fighter SiC seal syste for high perforance in sand High efficiency electrical design for low operation cost All otors prefilled and 1% tested Max. storage teperature -15 C C esign for retrofitable PT1 sensor Non containating FES 93 filling TECHNICAL SPECIFICATION (Standard otor) 3-93 kw 8 NEMA flange Protection: IP 68 Starts per hour: 1 Installation: vertical/horizontal (93 kw otors ay not be installed horizontally) Motor Lead in 6 length (KTW approved) Standard Voltage: V/5Hz, 46V/6Hz Voltage tolerance 5Hz: -1% / +6% UN [38-415V=(38-1%) (415+6%)] Voltage tolerance 6Hz: ±1%UN Motor protection: Select theral overloads according to IN OL / Y - start (pos. of cables 9 ) Standard otor with PVC winding insulation For ax. abient tep. of 3ºC with a in.cooling flow: 3 kw - 52 kw v =,2 /s 55 kw - 93 kw v =,5 /s OPTIONS Other voltages Motors in coplete 316 SS and 94 L Y - start (pos. of cables 9 ) PE2/PA winding insulation for ax. abient tep. of 5 C at the sae cooling conditions as standard PT 1 teperature sensor (sold separately) Lead in different lengths up to 5 42,9 in. Full Spline 127 h8 11,5 ±,1 8 REWINABLE MOTORS 3~ /4 V / 5 HZ P N [kw] Thrust F [N] n N [in -1 ] I N [A] I A [A] [%] cos [%] TN [N] TA [N] L [] [kg] ,84, ,84, ,86, ,86, ,86, ,87, ,87, ,87, ,88, ,88, Ø 189 ax. L 69

70 SubMonitor Motor Protection These 6 rewindable otors, anufactured in ISO 91 certified facilities, are built for dependable operation in 6 diaeter or larger water wells. Water lubricated thrust and radial bearings enable a aintenance free operation. A special diaphrag ensures pressure copensation inside the otor. The otor is filled with a special FES93 fluid, providing frost protection down to -15ºC storage teperture. The Sand fighter SiC seal syste is the option for sandy applications. For applications in aggressive edia, otors ade of 316SS and 94L are available. FEATURES Quick setup to onitor a otor, siply enter the Line Frequency (Hz), Line Voltage (volts), and Motor Service Factor Ap rating igital display indicates voltage and current on all three legs at the sae tie, and fault essages are in easily understandable text Monitors - Under/Overload; Under/Overvoltage; Current Unbalance; Overheated Motor (Subtrol Equipped); False Start (Chattering); Phase Reversal For otors with service factor ap ratings between 3 and 359 aps One unit covers the entire range fro 19 to 6 Volts No need to ake additional turns around the CT or add external CTs Password Protection Option IN Rail Mounting Option Stores fault, setting changes, and pup run-tie, that can be accessed through the display etachable NEMA 3R display unit can be ounted on panel door UL 58 Listed 7 MOEL NUMBER Preiu Package Input Voltage 19 6 VAC Frquency 6/5 Hz Motor Service Factor Aps 3 to 359 Aps Max. iaeter Motor, Under / Overload, Under / Overvoltage, Overheat Unbalance Control Circuit Rating Signal Circuit Rating Wire Gauge Tighten to Weight (SubMonitor) Carton Size (Std. Unit) Shipping Weight (Std. Unit) MAXIMUM CONUCTOR SIZE THROUGH SENSORS TRIP RESPONSE.92 in. (23 ) 3 seconds 1.5 Ap AC, up to 6 volts 1 Ap AC, up to 25 volts (Incandescent: 1 watts ax.) WIRING TERMINALS #12 to #18 AWG 4.5 in-lbs 3.3 lbs/7,3 kg 7,75 in x 11,5 in x 6,75 in (19,7 c x 29,2 c x 17,1 c) 3.5 Lbs./7.5 kg IMENSIONS

71 SubStart3P - 3 Phase Subersible Motor Starter The SubStart3P range covers all 3 phase otors fro.37kw to 7,5kW. Ergonoic design, attention to detail and unique features ake the SubStart3P otor starter range your first choice when considering subersible otor protection. In conjunction with Franklin Electric subersible otors you now have an tangible water syste advantage resulting in ease of installation and reliable protection. FEATURES Attention to detail every aspect engineered for the application The coplete package The device is 1% copatible with the otor characteristics All in one nae Reliability backed by the leader in subersible otors Mounting Wiring Protection Material ON/OFF Switch Circuit breaker Auxiliary relay Cable glands Motor Rating (kw) ERGONOMICALLY ESIGN Easy wall ounting without destroying the protection rating of the enclosure. Sufficient space is provided for ease of wiring. IP54 PVC / Polycarbonate ENCLOSURE COMPONENTS Manual otor starter switch Integrated theral ad agnetic overload protection Powered auxiliary contactor for use with external switches ensure IP54 rating SUBMERSIBLE MOTOR STARTER SPECIFICATIONS Type 3~ 4V 5Hz Model Nuber No. Current (A) Starting Current (A),37 SS37P ,1 5,4,55 SS55P ,6 7,4,75 SS75P ,6 1,1 SS11P ,8 16 1,5 SS15P ,9 2,7 2,2 SS22P ,5 29,8 3, SS3P ,5 42 3,7 SS37P ,3 4, SS4P ,9 57 5,5 SS55P ,6 77,2 7,5 SS75P ,1 99,3 TECHNICAL SPECIFICATIONS MECHANICAL Protection level IP 54 Environent This equipent is suitable for environent B according to IEC/EN : 21 Altitude ax 2 above sea level External diensions 19x184x16 <= 4kW 25x256x14 >= 5,5kW Weight 1,2 kg <= 4kW 2,3 kg >= 7,5kW Mounting Wall ounting (ounting hardware provided) Storage teperature -25 C to +55 C Operation teperature -5 C to +4 C Huidity 5% at 4 C (without condensation) Working Voltage Voltage tolerance Rated insulation voltage Rated short-tie withstand current Rated conditional short-circuit current Current Power IEC/EN : 21 ELECTRICAL 3~ / 5Hz V / -1% +6% 38V -1% / 415V+6% 4 Vac 5 ka 5 ka 5A, 9A, 16 A,37kW - 7,5kW STANARS IMENSIONS Motor Ratings (kw) B () L () H (),37kW - 4,kW ,5kW - 7,5kW L B H 71

72 Europa GbH Model ST37PSC For 4 1~ Motors S1 Overload: Manual Reset Protection: IP 54 Standard: IEC ATE COE Made in Europe SubTronicSC - Single Phase Motor Protection The SubTronicSC range covers all PSC otors fro.25kw to 2.2kW for all voltages. Ergonoic design, attention to detail and unique features ake the SubTronicSC otor starter range your first choice when considering subersible otor protection. In conjunction with Franklin Electric subersible otors you now have an tangible water syste advantage resulting in ease of installation and reliable protection. FEATURES Attention to detail every aspect engineered for the application The coplete package The device is 1% copatible with the otor characteristics All in one nae Reliability backed by the leader in subersible otors Mounting Wiring Matching range Wide range of operation ry-run detection (without probes) ry-run auto- reset Over & Under voltage Over current protection Faulty Start Protection Rapid Cycle Protection Status Voltage Fault conditions ERGONOMICALLY ESIGN Easy wall ounting without destroying the protection rating of the enclosure Reliable connectors are provided for ease of wiring MOTOR COMPATIBLE ESIGN The SubTronicSC Protector range was designed to atch the Franklin Electric range of PSC otors. Copatibility with otor design allows for a wide range of operation resulting in iniized nuisance tripping. INTELLIGENT PROTECTION AN MANAGEMENT FEATURES Prevents otor and pup daage due to running the pup without water based on a proprietary reliable detection ethod. Autoatic dry-run reset tie is based on a proprietary search algorith to find the best operating point for weak wells. Reset tie 6 to 6 inutes. Prevents otor daage that ay be caused by abnoral voltage conditions without liiting the range of operation, ade possible by atching the design of the SubTronicSC Protector with the otor. Reset tie approxiately 3 inutes. Prevents operation under conditions where otor current ay exceed safe levels due to bound pup or other fault condition. etection is based on current heating capacity easureent to prevent unnecessary nuisance tripping. Reset tie approxiately 1 inutes. Prevents syste daage due to factors such as faulty contacts or switch. Contact failure detection reacts fast and will prevent daage to syste coponents. Prevents syste daage due to factors such as continuous rapid cycling and excessive otor theral cycling caused by waterlogged tank, faulty contacts or faulty pressure switch. INICATORS Indication shows noral operation or other condition. Faulty voltage condition is indicated. ry-run, Over current, Rapid Cycling, and Faulty start are indicated. Protection level External diensions Weight Mounting Teperature Huidity Voltage Current Power TECHNICAL SPECIFICATIONS MECHANICAL IP54 29 x 23 x 95,6-1, kg Wall ounting (with options) -5 C - +4 C 5% at 55 C (without condensation) ELECTRICAL 22-24V; ± 1 %; 5Hz single phase 16 A,25-2,2 kw STANARS IEC when supplied with suitably fused supply. Part Nuber SUBTRONIC SC MOTOR PROTECTION SPECIFICATIONS Motor Noinal Maxial Type rating Current expected (kw) (A) current (A) Capacitor ( F) 45V ac ST25PSC,25 2,4 9,4 12, ST37PSC,37 3,3 12, ST55PSC,55 4,3 17, ST75PSC,75 5,7 22, ST11PSC 1,1 8,4 33, ST15PSC 1,5 1,7 41, ST22PSC 2,2 14,7 61,8 7 IMENSIONS Ø 5, SubTronic SC - PSC V 22 kw,37 5, A ax. 5 HZ V 23 HP,5 16 F 45V V 24 7G

73 SubTronic3P - 3 Phase Motor Protection The SubTronic3P range covers all 4 inch 3 phase otors fro.37kw to 7,5kW. Ergonoic design, attention to detail and unique features ake the SubTronic3P range your first choice when considering subersible otor protection and anageent. Together with Franklin Electric subersible otors you have an undisputable advantage, resulting in ease of installation, sophisticated syste anageent and peace of ind. Mounting Wiring Matching range Wide range of operation ry-run detection (without probes) ry-run auto- reset Over & Under voltage Over current protection Rapid Cycle Protection Status ERGONOMICALLY ESIGN Easy wall ounting offering various options without destroying the protection rating of the enclosure Reliable connectors are provided for ease of wiring MOTOR COMPATIBLE ESIGN The SubTronic3P Protector range was designed to atch the Franklin Electric range of 3 phase otors Copatibility with otor design allows for a wide range of operation resulting in iniized nuisance tripping INTELLIGENT PROTECTION AN MANAGEMENT FEATURES Prevents otor and pup daage due to running the pup without water based on a proprietary reliable detection ethod Autoatic dry-run reset tie is based on a proprietary search algorith to find the best operating point for weak wells. Reset tie in ax. 6 inutes Prevents otor daage that ay be caused by abnoral voltage conditions without liiting the range of operation, ade possible by atching the design of the SubTronic3P Protector with the otor. Reset tie approxiately 3 inutes Prevents operation under conditions where otor current ay exceed safe levels due to bound pup or other fault condition. etection is based on current heating capacity easureent to prevent unnecessary nuisance tripping. Auto-reset in 15 inutes. Manual reset possible in approxiately 5 inutes by reapplying power Prevents operation under conditions where otor current ay exceed safe levels due to bound pup or other fault condition. etection is based on current heating capacity easureent to prevent unnecessary nuisance tripping. Auto-reset in 15 inutes. Manual reset possible in approxiately 5 inutes by reapplying power INICATORS Indication shows noral operation or other condition TECHNICAL SPECIFICATIONS MECHANICAL Protection level IP 54 Environent This equipent is suitable for environent B according to IEC/EN : 21 Altitude ax 2 above sea level External diensions 19x184x16 <= 3kW 25x256x14 >= 3,7kW Weight 1,2 kg <= 3kW 2,3 kg >= 3,7kW Mounting Wall ounting (ounting hardware provided) Storage teperature -25 C to +55 C Operation teperature -5 C to +4 C Huidity 5% at 4 C (without condensation) Working Voltage Voltage tolerance Rated insulation voltage Rated short-tie withstand current Rated conditional short-circuit current Current Power ELECTRICAL 3~ / 5Hz V 38V -1% / 415V+6% 4 Vac 5 ka 5 ka 5A, 9A, 16 A,37kW - 7,5kW STANARS Voltage Faulty voltage condition is indicated IEC/EN : 21 Fault conditions Motor Rating (kw) ry-run, Over Current, Rapid Cycling, Over Voltage and Under Voltage are indicated SUBTRONIC SC MOTOR PROTECTION SPECIFICATIONS Type 3~ 4V 5Hz Model Nuber No. Current (A) Max. Current (A),37 ST37P ,1 5,4,55 ST55P ,6 7,4,75 ST75P ,6 1,1 ST11P ,8 16 1,5 ST15P ,9 2,7 2,2 ST22P ,5 29,8 3 ST3P ,5 42 3,7 ST37P ,3 4 ST4P ,9 57 5,5 ST55P ,6 77,2 7,5 ST75P ,1 99,3 IMENSIONS Motor Ratings (kw) B () L () H (),37kW - 3,kW ,7kW - 7,5kW B L H 73

74 Terination Kit 4 This proven, sturdy solution is your choice of cable joining in teporary pup applications or when re-usage if the drop cable is desired. Furtherore, the flexibility and safety it provides for under field service conditions akes it the preferred choice over conventional, not breakable splicing kits. ouble Plug Lead for Terination Kit Required for use of lead terination kit. Connected between terination kit and 4 otor 2-wire / 3-wire 1,5 / 2,5 Lead lenght With / without Strain relief Max. current 16 Aps KTW approved Splicing Kit 1,5-12 3M Quality 4 wire 1,5-1² up to 1,1kV Filling Liquid FILLING LIQUI 5 L FES92 4" Encapsulated FES93 8" Encapsulated Standard FES91 6" Encapsulated Standard FES91 8" Encapsulated HighTep75 FES92 6" Encapsulated HighTep9 FES92 Rewindable Standard Motors All FES93 6" Rewindable PM Motors FES91 FES91 FES92 FES93 Motor Filling Kit This kit contains all necessary tools to check and replenish Franklin Electric subersible otors with FES 91, 92 or 93 filling liquid (fill solution/concentrate ust be ordered separately) 74

75 6 - Peranent Star Plug Application For soe applications it ay be necessary to peranently run a star-delta subersible otor in star connection. This ay be achieved by using the PERMANENT-STAR-PLUG. This connector short - circuits all three pins in one of the two otor sockets and is designed to replace one lead. Couplings Application Franklin Electric offers this line of otor-pup couplings for axiu custoer convenience in atching the Franklin otor to a variety of pup shafts. Couplings are designed to transit the pup thrust to the otor in order to provide axiu benefits fro the Franklin internal thrust bearing construction. Hardened stainless steel spacer discs in the 4 and 6 couplings assure positive bearing between otor and pup shafts, and assure full support for downward thrust created by the pup. 8 couplings O NOT contain hardened spacer discs, since the otor shaft itself is hardened. Surge Arrestor Application These surge arrestors or their equivalents are highly recoended for protecting subersible otors fro a variety of coonly occurring high voltage spikes which can daage the otor insulation syste and cause otor winding failure. These arrestors will not, as is true of any surge protection equipent, protect the otor fro a direct lightning strike. Corrosion Protection 4 Application The sacrificial anode attaches to the botto end bell of Franklin Electric 4 Super Stainless subersible otors. Since cast iron is ore cheically active than the etals that ake up the otor and pup, it is the cast iron that reacts to the corrosive eleents in the water. This results in longer otor and pup life in aggressive / corrosive water conditions. LT HT 75

76 PT1 for 6 and 8 - Encapsulated Motors Application The PT1 is a precision platinu wire resistor that is specifi ed occasionally as a teperature input for process control equipent. A jacketed control lead ust be run fro the PT1 lead to the above-ground equipent. The above-ground equipent is not available fro Franklin Electric and is typically part of a custo panel or data acquisition syste. PT1 sensor retrofi t kits fro Franklin Electric coe with coplete instructions and allow for easy field installation. PT1 - Rewindable Motors Application installation PT 1 Conductor with a resistance proportional to the teperature The above-ground equipent is not available fro Franklin Electric and is typically part of a custo panel or data acquisition syste. PT1 sensor retrofit kits fro Franklin Electric coe with coplete instructions and allow for easy field installation. 76

77

78 Single eber Copany subject to the control and coordination of Franklin Electric Co., Inc. Geoquip reserves the right to aend specification without prior notice 143_Rev.1_Ed 1/216