Waveguide Directional Couplers. Cross Guide Couplers CC SERIES
|
|
|
- Alison Williams
- 5 years ago
- Views:
Transcription
1 Directional Couplers Cross Guide Couplers CC SERIES Broad Wall Couplers Side Wall Couplers DC SERIES SC SERIES
2 CROSS GUIDE COUPLERS (3PORT) Coupling Values: Nominal Coupling Values Accuracy V.S.W.R. 20 db ±5 db 1.32 max 30 db ±1 db 1.22 max 40 db ±1.5 db 1.06 max 10 db min, 20 db Typical A B C D CC 10 AQB- (***-***)-B-(**) A CC 11A AQB- (***-***)-B-(**) CC 12 AQB- (***-***)-B-(**) CC 14 AQB- (***-***)-B-(**) CC 15 AQB- (***-***)-B-(**) CC 16 AQB- (***-***)-B-(**) CC 17 AQB- (***-***)-B-(**) CC 18 AQB- (***-***)-B-(**) CC 20 AQB- (***-***)-B-(**) CC 22 AQB- (***-***)-B-(**) *** For 3 Digit Rectangular Flange part number, refer to the Flange Catalogue, or consult the factory. Available in 20,30, and 40 db Coupling only. For other Coupling values contact the factory.
3 CROSS GUIDE COUPLERS (4 PORT) Coupling Values: Nominal Coupling Values Accuracy V.S.W.R. 20 db ±5 db 1.29 max 30 db ±1.5 db 1.17 max 40 db ±1.75 db 1.06 max 10 db min, 20 db Typical A B C CC 10 BQB- (***-***)-B-(**) A CC 11A BQB- (***-***)-B-(**) CC 12 BQB- (***-***)-B-(**) CC 14 BQB- (***-***)-B-(**) CC 15 BQB- (***-***)-B-(**) CC 16 BQB- (***-***)-B-(**) CC 17 BQB- (***-***)-B-(**) CC 18 BQB- (***-***)-B-(**) CC 20 BQB- (***-***)-B-(**) CC 22 BQB- (***-***)-B-(**) *** For 3 Digit Rectangular Flange part number, refer to the Flange Catalogue, or consult the factory. Available in 20,30, and 40 db Coupling only. For other Coupling values contact the factory.
4 DIRECTIONAL COUPLERS (3 PORT) BROADWALL Coupling Values: Coupling Values Accuracy WG db ±1.5 db WG db ±1.5 db WG db ±2.0 db WG db ±2.0 db WG As above ±2.0 db Return loss: Secondary Arm 27 db min. Flatness: ±1 db WG10-18 (Full band spec 35 db min over 75% of the bandwidth see table) WG db min over 50% of the bandwidth Directivity Return Minimum Loss (db) (Primary) (2). (db) A B C DC 10 AQB- (***-***)-B-(**) A DC 11A AQB- (***-***)-B-(**) DC 12 AQB- (***-***)-B-(**) DC 13 AQB- (***-***)-B-(**) DC 14 AQB- (***-***)-B-(**) DC 15 AQB- (***-***)-B-(**) DC 16 AQB- (***-***)-B-(**) DC 17 AQB- (***-***)-B-(**) DC 18 AQB- (***-***)-B-(**) DC 20 AQB- (***-***)-B-(**) DC 22 AQB- (***-***)-B-(**) *** For 3 Digit Rectangular Flange part number, refer to the Flange Catalogue, or consult the factory. Available in10, 20, 30 and 40 db Coupling values. Narrow band designs for 3, 6, 10 and 12 db are available, however other electrical and mechanical parameters may change. Please contact factory for details.
5 DIRECTIONAL COUPLERS (4 PORT) BROADWALL Coupling Values: Coupling Values Accuracy WG db ±1.5 db WG db ±1.5 db WG db ±2.0 db WG db ±2.0 db WG As above ±2.0 db Return loss: (Secondary Arm 22 db) min. Flatness: ±1 db WG10-18 (Full band spec 35 db min over 75% of the bandwidth see table) WG db min over 50% of the bandwidth Directivity Return Minimum Loss (db) (Primary) (2). (db) A B C DC 10 BQB- (***-***)-B-(**) A DC 11A BQB- (***-***)-B-(**) DC 12 BQB- (***-***)-B-(**) DC 13 BQB- (***-***)-B-(**) DC 14 BQB- (***-***)-B-(**) DC 15 BQB- (***-***)-B-(**) DC 16 BQB- (***-***)-B-(**) DC 17 BQB- (***-***)-B-(**) DC 18 BQB- (***-***)-B-(**) DC 20 BQB- (***-***)-B-(**) DC 22 BQB- (***-***)-B-(**) *** For 3 Digit Rectangular Flange part number, refer to the Flange Catalogue, or consult the factory. Available in10, 20, 30 and 40 db Coupling values. Narrow band designs for 3, 6, 10 and 12 db are available, however other electrical and mechanical parameters may change. Please contact factory for details.
6 DIRECTIONAL COUPLERS (3 PORT) BROAD WALL (High Directivity) Mean Coupling: Coupling Sensitivity: Return loss: Body Material: ±0.5 db over the respective bandwidth for all standard coupling values ±0.75 db about the mean coupling value over the specified frequency band Secondary Arm 27 db min. Brass Directivity Return Minimum Loss (db) (Primary) (2). (db) A B C DC 10 DQB- (***-***)-B-(**) A DC 11A DQB- (***-***)-B-(**) DC 12 DQB- (***-***)-B-(**) DC 14 DQB- (***-***)-B-(**) DC 15 DQB- (***-***)-B-(**) DC 16 DQB- (***-***)-B-(**) DC 17 DQB- (***-***)-B-(**) DC 18 DQB- (***-***)-B-(**) DC 20 DQB- (***-***)-B-(**) DC 22 DQB- (***-***)-B-(**) * Mean Coupling value is defined as the average coupling value (in db s) across the specified frequency range. *** For 3 Digit Rectangular Flange part number, refer to the Flange Catalogue, or consult the factory. High directivity designs shown are available in 10, 20, 30 and40db Please contact factory for further details.
7 Ordering Information DC16 A Q B B 10 TYPE A = STANDARD, 3 PORT B = STANDARD, 4 PORT D = HIGH DIRECTIVITY, 3 PORT COUPLING VALUE 10= 10 db ( for Broadwall coupler) 20= 20 db ( for Broadwall & Cross Coupler) 30= 30 db ( for Broadwall & Cross Coupler) 40= 40 db ( for Broadwall & Cross Coupler) MATERIAL B= BRASS OUTPUT FLANGE SELECT THE REQUIRED FLANGE BY SELECTING THE LAST 3 DIGITS OF THE FLANGE PART No. E.g. 402= UBR FLANGE FLANGE TYPE (INPUT PORTS) SELECT THE REQUIRED FLANGE BY SELECTING THE LAST 3 DIGITS OF THE FLANGE PART No. E.g. 402= UBR FLANGE FINISH Z = UNPLATED (NON-STANDARD OPTIONAL FOR BRASS) A = TIN (OPTIONAL NON-STANDARD) B = SILVER (STANDARD) PAINT Q = BLUE (STANDARD) B = BLACK (OPTIONAL NON-STANDARD) G = GREY (0PTIONAL, NON-STANDARD) WAVEGUIDE SIZE USE THE BRITISH WG SIZE FOR RECTANGULAR WAVEGUIDE E.g. 16= WAVEGUIDE SIZE WG16 PRODUCT CODE DC = DIRECTIONAL COUPLER BROADWALL CC = CROSS GUIDE COUPLER SC = SIDE WALL DIRECTIONAL COUPLER Notes: 1) The flange should match the material of the device to remain standard. 2) Other coupling values between 3 & 60 db available on request. Commercial in Confidence
Waveguide Load Terminations
Load Terminations Fixed Loads / FL SERIES Sliding Loads / SL SERIES The Solution range of Low Power and Sliding load terminations has been designed to offer optimum Return Loss Performance. The dissipative
Section 5. Directional Couplers. Introduction
Section Directional ouplers Introduction t MDL, directional couplers have always received the engineering and manufacturing attention due a major component. wide variety of types are offered, often tailored
Section 16. Short Slot Hybrids. Theory
Section Short Slot Hybrids Theory FIGURE 1 COUPLER TERMINOLOGY Coupling = Ratio A to C Balance = Ratio B to C Directivity = Ratio C to D Isolation = Ratio A to D Isolation = Coupling + Directivity PHASE
Waveguide Flanges. Rectangular Flanges. Double Ridge Flanges F-D SERIES
Waveguide Flanges Rectangular Flanges F SERIES Double Ridge Flanges F-D SERIES Materials Aluminium (Shown in blue type) Brass (Shown in black type.) Codes RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR
Section 3. Rotary Joints. Introduction
Section Rotary Joints Introduction For more than forty years, MDL has produced waveguide rotary joints and is one of the major suppliers in both domestic and overseas markets. Many of the larger military
FERRITE PRODUCTS TABLE OF CONTENTS
FERRITE PRODUCTS TABLE OF CONTENTS No. B002i SERIES FERRITE PRODUCTS Rectangular Waveguide Circulator 3 Port Junction Design 140 T173 Rectangular Waveguide Circulator 4 Port Differential Phase Shift Design
Microwave Isolators and Circulators
Microwave Isolators and Circulators 24 HOUR SHIPPING ON IN-STOCK ITEMS Single Junction Octave/Broadband Frequency 1 Isolator Circulator Insertion Temperature Approx Range Model Model Isolation Loss Power
ABB SpA COMEM Operating Unit Power Grids Division Strada Regionale 11, Signolo Montebello Vicentino (VI) - ITALY
ABB SpA COMEM Operating Unit Power Grids Division Strada Regionale 11, Signolo 22 36054 Montebello Vicentino (VI) - ITALY www.abb.com/transformercomponents The information contained in this document is
CAV controllers. Type VFL. Volume flow limiter for insertion into ducting K
.1 X X testregistrierung CAV controllers Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical
DATA SHEET NTC thermistors, accuracy line. BCcomponents
DATA SHEET 2322 640 6... N thermistors, accuracy line Supersedes data of April 1995 File under BCcomponents, BC02 1998 Sep 04 FEATURES Accuracy over a wide temperature range High stability over a long
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
SC0715BL STANDARD BUZZER
Pagina 1 van 6 The standard series are based on the highest piezo technology and are considered to be the most robust series for industrial applications. The standard buzzers use a bent edge membrane,
VAV terminal units. Type TVM. For dual duct systems PD TVM 1
X X testregistrierung VAV terminal units Type Variant -S Rectangular connection on the room end For dual duct systems VAV dual duct terminal units for dual duct systems with variable volume flows in buildings
PAGE# PAGE# PAGE# ADAPTERS * ROTARY JOINTS. * I Style 23 Broadwall 36 * L Style 24 Crossguide 37
MICROTECH, INC STANDARD COMPONENTS PRODUCT INDEX DOUBLE RIDGED COMPONENTS PAGE# PAGE# PAGE# ADAPTERS PRESSURE INLETS * ADAPTERS ARC DETECTORS W/G to Coax 28 PRESSURE WINDOWS 21 W/G to Coax 12 PRESSURE
PERFORMANCE DATA Intermittent Volume (Parallel Flow), Standard Design
FAN CURVES vs FAN SIZE A AS 05, 06, 07 1/6 H.P. Motor FAN SIZE B AS 06, 07, 08 1/6 H.P. Motor NOTES: 1. External Static Pressure (ESP) consists of down stream ductwork, coils, flex, duct, etc. 2. Pressure
CAV controllers. Type EN. For the precise control of normal and high constant volume flows. 01/2017 DE/en PD EN 1
X X testregistrierung CAV controllers Type For the precise control of normal and high constant volume flows Rectangular self-powered volume flow controllers for the control of supply air or extract air
Pressure sensor for liquid and gaseous media QBE620-P...
1 904 Pressure sensor for liquid and gaseous media QBE620-P... Pressure sensor for the measurement of positive pressure in HVAC applications. Piezo-resistive system of measurement DC 0...10 V output signal
CAV controllers. Type VFL. Volume flow limiter for insertion into ducting PD VFL 1
X X testregistrierung CAV controllers Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical
GHz Standard Performance Dual Pole Parabolic Reflector Antenna
5.25-5.85 GHz Standard Performance Dual Pole Parabolic Reflector Antenna Standard Performance Dual Pole Parabolic Reflector Antennas from Cambium Networks are well suited for deployment with any of the
CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX)
X X testregistrierung CAV controllers Type Adjustment scale For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX) Rectangular, mechanical self-powered
PRODUCT MANUAL BT SERIES
PRODUCT MANUAL BT SERIES Division Valve Remote Control. Division Offshore Hydraulic. Division Offshore Inspection and Testing. Division Integrated Control and Safety System ( ICSS ) PRODUCT MANUAL BT SERIES
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
LMF / LMG RANGE ACCESSORIES CONTENTS
CONTENTS Application of Cable Entry Fittings..... Ordering Information... 4 Outlet Accessory Sets..... 5-7 Protective Caps for Aluminium Range.. 8 Protective Caps for Brass Range (Brass)..... 9 Protective
VHS... Screw Flow Meter
Member of the Group VHS... Screw Flow Meter The normal transmitter with block plug already has a push pull output to serve all NPN or PNP Inputs. It supplies a square wave signal. Those transducers are
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
Homepage > Products > External louvres - louvre blades > Mechanically self-powered dampers > Non-return dampers > Type KUL.
Homepage > Products > External louvres - louvre blades > Mechanically self-powered dampers > Non-return dampers > Type KUL Type KUL FOR INSTALLATION INTO DUCTWORK Non-return dampers prevent unwanted airflows
Data sheet: Wilo-TOP-Z 50/7 (3~400 V, PN 6/10, RG)
Data sheet: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Pump curves Three-phase current H/m 7 6 5 4 3 2 1 P1/W 6 4 2 v,5 1 1,5 2 2,5 3 3,5 Wilo-TOP-Z 5/7 3~4 V - DN 5 1 2 3 4 5 6 7 Dimension drawing 66 66 DN 5
CROSS FIELD ARRAY-2 (CFA-2) Long Throw/High Intelligibility All-Weather Loudspeaker System V100/2015
CROSS FIELD ARRAY-2 (CFA-2) Long Throw/High Intelligibility All-Weather Loudspeaker System V100/2015 The One Systems Cross Field Array-2 (CFA-2) was designed to provide very high intelligibility and acoustic
Transformer bushings, type GOA 250. Installation and maintenance guide
Transformer bushings, type GOA 250 Installation and maintenance guide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
Red Thread IIA Primary Fittings (Product Data)
Red Thread IIA Primary Fittings (Product Data) FUEL HANDLING 90 and 45 Elbow, Flange and Tee Pipe Size A B C D E F O X 1 X 2 in mm in mm 2 50 3 3/8 86 2 1/4 57 3/4 19 4 3/4 121 3/4 D-4 Holes 19 D-4 Holes
Backed and fully. supported by Fills. more power. 3 Year Warranty REV120815
Solid-State Amplifiers HV TECHNOLOGIES, Inc. providing Sales and Service in North America for: HIGH POWER SOLID-STATE AMPLIFIERS Covering North America Including: United States, Canada, and Mexico Long
MAINTENANCE NOTE: ANY LEAK FROM THE MAIN BODY OF THE LOAD IS AN INDICATION THAT THE UNIT SHOULD BE RETURNED TO THE FACTORY FOR REPAIRS.
MAINTENANCE The OMEGALINE RF loads will require little in the way of maintenance. Components located inside the unit other than the resistor element and the filter screen are not subject to field maintenance.
Type TVT FOR NORMAL AND HIGH VOLUME FLOW RATE RANGES AND LOW-LEAKAGE SHUT-OFF
Type TVT FOR NORMAL AND HIGH VOLUME FLOW RATE RANGES AND LOW-LEAKAGE SHUT-OFF Rectangular VAV terminal units for standard applications regarding the supply air or extract air control in variable air volume
For installation into ductwork
X X testregistrierung Non-return dampers Type For installation into ductwork Non-return dampers prevent unwanted airflows against the intended airflow direction when the system is not in operation Maximum
SafeGarment User s Guide SafeGarment
SafeGarment User s Guide www.safegarment.com SafeGarment SafeGarment Basics Table of Contents SafeGarment Assembly Kit Using the SafeGarment Locking System 100 Series Free-standing Displays Series Overview
THE FASTEST CABLE TRAY SYSTEM
E FASES CABLE RAY SYSEM A FULL RANGE OF PERFORAED CABLE RAY PRODUCS MANUFACURED O E IGES SANDARDS, OFFERING IME SAVING AND ADAPABLE DESIGNS, PRACICAL SLO PAERNS AND VERSAILE ACCESSORIES. Bespoke Steel
Air displacement diffusers - p 202. Diffusers with rotating nozzle - p 215. Alum jet diffusers - p 221. Steel jet diffusers - p 225
0,5 0,4 0,3 0,25 0,2 0,16 0,12 0,1 0,08 0,06 0,05 0,04 0,03 0,025 0,02 0,3 0,4 0,5 0,6 1 1,5 2 2,5 3 4 5 125 2 315 ir displacement diffusers - p 202 Diffusers with rotating nozzle - p 215 lum jet diffusers
Mid to High Power FM Antennas
Mid to High Power FM Antennas FMM Series FMP Series Micronetixx builds two mid to high power FM antenna families, the FMM, and the FMP. Both series of antennas are constructed from rugged stainless steel
PS Powder Sieve Machine
Spare Parts List Issued 07/95 PS Powder Sieve An ITW Company 7 Spare Parts List 7.1 Ordering Spare Parts When ordering spare parts for powder coating equipment, please indicate the following specifications
BESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
CAV controllers Type RN
2.1 X X testregistrierung CAV controllers Type For the precise control of constant volume flow rates Circular self-powered volume flow controllers for the control of supply air or return air in constant
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
Pressure Sensors. for liquid and gaseous media
1 909 1909P01 Pressure Sensors for liquid and gaseous media QBE2002-P QBE2102-P Piezo-resistive measuring system DC 0...10 V or DC 4 20 ma output signal Measurement unaffected by changes in temperature
STAF-SG. ANSI flanges. Balancing valves Size 3/4-16
STAF-SG ANSI flanges Balancing valves Size 3/4-16 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance
High RF (HiRF) EMC Solutions Overview
EMC Solutions HiRF s High RF (HiRF) EMC Solutions Overview Q par Angus Ltd have teamed up with TMD Technologies Ltd to produce a range of unrivalled antenna and amplifier solutions that exceed the latest
BRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: Fax: PRODUCT GUIDE
BRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: 01406 351249 Fax: 01406 351658 PRODUCT GUIDE SECURITY - PADLOCKS, LOCKS, CHAINS AND CHAIN FITTINGS CONTENTS PAGE 1 PADLOCKS PAGE 1 PAGE 2 PADLOCKS PAGE 2 PAGE
7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
Description & Features: Applications:
Description & Features: Most economical, all-purpose pressure gauge.5" (40mm) to 4" (00mm) sizes Friction bezel rings Black steel case Brass internals ±3-2-3% accuracy CRN registered 5 year warranty Applications:
CURRENT TRANSFORMER MODEL N. SS BAND SECURES BRACKET (view of screw clamp band omitted for clarity) 0.25 x 0.50 SLOT (2 PLACES)
MODEL N 4." I.D. PAGE No 1-30 TERMINAL OPTION LEAD WIRE OPTION 6.75 SS BAND SECURES BRACKET (view of screw clamp band omitted for clarity) 0.75 1.36 1.16 5.75 7.00 0. x 0.50 SLOT (2 PLACES) UL 1015 #16
SILENCERS. Contents. Page No. Features, Description, Sizes and Options. Performance Data. Submittal Data Request Sheet
Contents Page No. Features, Description, izes and Options Rectangular Dissipative ilencers RBB-LP Rectangular Broad Band - Low Pressure Insertion Loss RBB-MP Rectangular Broad Band - Medium Pressure Insertion
Steel Hinges. Section 1 Page 1. LIGHT STEEL BUTT HINGES MHL Fixed Pin. MHL Loose Pin. STRONG STEEL BUTT HINGES MHL 15.
Steel Hinges LIGHT STEEL BUTT HINGES MHL 15.01 Fixed Pin Sizes: 40, 50, 65, 75, 100, 150 mm. MHL 15.02 Loose Pin Sizes: 75, 100 mm. MHL 15.01 STRONG STEEL BUTT HINGES MHL 15.03 Fixed Pin Sizes: 75, 100
6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C Table of Contents 6, 6 6, 6 supply ceiling diffusers feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is available. 62, 62 62FR, 629F supply,
High Power Directional Coupler
DATA SHEET High power coupler at 500 W across a wideband from 698 to 2700 MHz Low RF Insertion Loss and excellent return loss performance Outdoor unit with a wide range of coupling values from 6 to 20
Electrical Stability (ohm-cm, max.) Heat Aging Resistance After
CONDUCTIVE ELASTOMER WAVEGUIDE GASKETS Waveguide Gaskets For effective EMI shielding and pressure sealing for choke, cover and contact flanges, Chomerics waveguide gaskets ensure low insertion, low flange
ELAPSED TIME INDICATORS
ELAPSE TIME INICATORS AC SERIES: SUBMINIATURE ELAPSE TIME INICATORS & Models 21, 25, 91, 92 & 95 See the Military Cross Reference for military qualified models, pages 82-84. The AC meter was developed
Catalogue WOW! World of Weller
Catalogue WOW! World of Weller Soldering Stations Cost reduction - longer tip lifetime due to temperature reduction Automatic tool recognition Easy tip exchange without tools ESD safe ESD Ready, set, go
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
Differential pressure gauge with reed switch Model: P680 series
Differential pressure gauge with reed switch Model: P680 series Spec. sheet no. PD06-10 Service intended P680 series are differential pressure gauge is designed to measure differential pressure from 25
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
ELAPSED TIME INDICATORS
ELAPSE TIME INICATORS C SERIES: SUBMINIATURE Models 16, 16 & 46 See the Military Cross Reference for military qualified models, page 82. The Electrodynamics C meter was developed to meet the difficult
datasheet TCS-122 TCS-122DP
DP The is a two-way loudspeaker enclosure available in either switchable active/passive or optional digitally self-powered formats, and designed for use in a wide range of fixed installations. It consists
April Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![April Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/81/83197649.jpg "April Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s April 2015 Multilayer Directional Coupler For 1920-1980MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Directional Coupler For 1920-1980MHz Conformity to RoHS Directive
HB IP65 Hood and Housing Series
Table of contents Application Specification 114-137013 HB IP65 Hood and Housing Series 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3.
Product Range Handbook
Product Range Handbook 1 Where to find us Building 144 Culham Number 1 Site Station Road CULHAM Oxon OX14 3DA Sales: +44 (0)1865 409300 Fax: +44 (0)1865 407991 2 INDEX PAGE ROUND BARS 4 SQUARE BAR 5 TEES
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM-0902094710 Application: GSM 900 Duplexer ISSUED CHECKED CHECKED
CCS Zone/Bypass Damper Assembly
Code No. LIT-1900539 Issued July 15, 2011 UZR-xx-x, UBR-xx-x, UZD-0xxX0xx-x, UBD-0xxX0xx-x CCS Zone/Bypass Damper Assembly Description The Commercial Comfort System (CCS) Zone/Bypass Damper are zone control
CSB Series Broadband Motorized Coaxial Switches
CSB Series Broadband Motorized Coaxial Switches Features Broadband DC to 806 MHz 3 or 4 port configurations Three port application require only the addition of a shorting cap Non-volatile position memory
Electric Switchboards
Technological Solutions for Electric Switchboards and protection solutions for the design and assembly of switchboards. The objective: to facilitate the assembly, optimization of space on panels and improve
FAN POWERED SERIES FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT SPECIFIABLE FEATURES
FAN TERMINAL UNIT SPECIFIABLE FEATURES Galvanized steel casing, mechanically sealed for low leakage construction NEMA TYPE 1 rated hinged control enclosure with standoff to prevent penetration of casing
Series Regulators - Pressure Reducing
Regulators - Pressure Reducing D26100538X012 Specifications For other materials or modifications, please consult TESCOM. Operating Parameters Pressure rating per criteria of ANSI/ASME B31.3 Maximum Inlet
CAV controllers. Type RN. For the precise control of constant volume flow rates PD RN 1
X X testregistrierung CAV controllers Type For the precise control of constant volume flow rates Circular self-powered volume flow controllers for the control of supply air or extract air in constant air
Insulation displacement terminals. OEC Product Catalogue
Insulation displacement Terminals for Low Voltage cables Series CNT/PRF-1 UNIPOLAR INSULATION DISPLACEMENT BRANCH TERMINALS for SELF-SUPPORTING LOW VOLTAGE CABLES TYPE DM 6050/1 Article code: N0CE0031
LMV RANGE CONTENTS. General information
General information LMV RANGE CONTENTS Basic safety information. 2 Main features...... 3 Intermateability.. 3 Characteristics....... 4 Connection system.... 4 Ordering information Standard connector part
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
INSTRUCTION MANUAL TIPPING BUCKET RAINGAUGE MODEL HS305
INSTRUCTION MANUAL TIPPING BUCKET RAINGAUGE MODEL HS305 HS305 100-01 CONTENTS Page I General HS305 100-03 II Specification HS305 100-03 III Installation HS305 100-04 IV Test Operation HS305 100-05 V Maintenance
CAV controllers. Type RN-Ex. For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) PD RN-Ex 1
X X testregistrierung CAV controllers Type Adjustment scale ATEX-Zertifizierung For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) Circular, mechanical self-powered
SERIES TAP-CHANGER
SERIES 090 - TAP-CHANGER Main characteristics This is an off-circuit tap changer. It means DO NOT OPERATE WHILE THE TRANSFORMER IS ENERGISED. Main characteristics of this tap-changer series are: dimensional
SPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
4880 This heavy duty, double deflection, supply grille features 1/2 front and 3/4 back blade. spacing. Available in steel construction only.
I1I Table of Contents 1/51 1M/51M These supply grilles feature individually adjustable curved blades. Available in steel or aluminum construction. /5 These single deflection supply grilles feature 3/ blade
NTC Accurate Thermistors
NC Accurate hermistors NP30 - NJ 28 NI 24 NK 20 High precision resistance and an outstanding ability to reproduce the sensibility index B, make these ranges of products the types of thermistors ideal for
Discharge oil capacity cm Discharge oil capacity. Max. stroke volume on retraction Remarks.
2 High Power Systems High Power Systems 3 Working pneumatic pressure range MPa 0.2 to 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 Boosting ratio Theoretical output oil pressure at max. working pneumatic
Data sheet: Wilo-TOP-Z 30/7 (3~400 V, PN 10, RG)
Data sheet: Wilo-TOP-Z 3/7 (3~4 V, PN 1, RG) Pump curves Three-phase current H/m 5 4 v,5 1 1,5 2 2,5 Wilo-TOP-Z 3/7 3~4 V - Rp 1¼ m/s Approved fluids (other fluids on request) Drinking water and water
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
GEZE SLIDING DOOR SYSTEMS
The quiet roller-guided sliding door for simple sliding concepts The quiet GEZE Rollan 40 N and Rollan 80 roller-guided sliding door enable uncomplicated integration of sliding concepts in indoor spaces.
Kulka Military Class (A-A-59125) / (MIL-T-55164*)
(--59125) / (MIL-T-55164*) Military Class: Closed ack Supercedes MIL-T-59125 These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
DUMMY LOADS INTRODUCTION SPECIAL DESIGN
DUMMY OADS INTRODUCTION DEFINITION: A dummy load is a high power single terminal device intended to terminate a transmission line. They are primarily employed to test high power microwave systems at full
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
PRODUCT INFORMATION. UNITRONIC LiYCY. Benefits Overall shield minimises electrical interference Versatile application possibilities
Shielded data cable with colour code according to DIN 47100 - shielded PVC data cable with colour code DIN 47100 for use in machinery and apparatus construction and in measurement, control and regulation
Wide band isolators (Peripheral Mode) 1-3 // // 2-6 // // 2-18 // //4-12// 4-20// 6-21// 8-18
SMA/N/ K Connector options (X) Isolator Port 1 Port 2 Female Male -1 Male Female -2 Female Female -3 Male Male -4 Tolerance Table Metric (inch) (unless otherwise stated): Hole diameter +/- 0.1mm, (+/-
PRODUCT INFORMATION MULTI-STANDARD SC 2.1. U.I. Lapp GmbH
GmbH PRODUCT INFORMATION USA: UL-listed (MTW), Canada: CSA (TEW), Europe: H07V-K (depending on cross s.), tin-coated strands For use in the most important global markets Reduction in technical documentation
Series 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
DKISMA. Systemair multicompartment rectangular smoke control dampers. Ordering codes. Description. Design. Fire safety products 1 / 8.
Fire safety products 1 / 8 DKISMA Systemair multicompartment rectangular smoke control dampers Resistance class EI120(v ew i o) S1500C mod AAmulti 1396 - CPR - 0112 Ordering codes Nominal dimensions Type
continuous use min hours (expected life time curve in addendum)
SPECIFICATIONS Model SC 235 A SC 235 B SCI 535 A1 SCI 535 B1 SCI 535 A5 SCI 535 B5 SCR 535 A SCR 535 B SW 535 B SUC 516 A SUC 516 B SULC 516 B SULI 516 B1 SULI 516 B5 SUM 516 A1 SUM 516 A5 SULM 516 B1
Insulated Crimp Terminals
CONTENTS PVC Insulated ring terminals 3 PVC insulated spade terminals 3 PVC insulated pin terminals 4 PVC insulated blade terminals 4 PVC insulated butt connectors 4 PVC insulated female disconnectors