KNX-20E. 640mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15. File Name:KNX-20E-SPEC Sicherheit ID

Size: px
Start display at page:

Download "KNX-20E. 640mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15. File Name:KNX-20E-SPEC Sicherheit ID"

Transcription

1 640mA KX Power Supply KX-20E Bauar t gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID Isolation classⅠ Installed on DI rail TS-35/7.5 or 15 File ame:kx-20e-spec

2 640mA KX Power Supply KX-20E SPECIFICATIO MODE BUS OUTPUT VOTAGE WITH CHOKE DC OUTPUT VOTAGE WITHOUT CHOKE RATED CURRET RATED POWER KX-20E-640 Bus,30V (KX black/red terminal block) 30V(Additional output for ancillary power) 640mA 19.2W OUTPUT IPUT RIPPE OISE (max.) ote.2 SHORT CIRCUIT CURRET SETUP, RISE TIME AC MAIS FAIURE BACK-UP TIME(Typ.) VOTAGE RAGE FREQUECY RAGE EFFICIECY (Typ.) ote.3 AC CURRET (Typ.) IRUSH CURRET (Typ.) EAKAGE CURRET 100mVp-p 1.4A 1000ms, 50ms/230VAC at full load 200ms/230VAC at full load 180 ~ 264VAC 254 ~ 370VDC 47 ~ 63Hz 86% 0.22A/230VAC COD START 40A/230VAC <1mA / 240VAC OVEROAD PROTECTIO OVER VOTAGE RESET FUCTIO ED DISPAY CHOKE WORKIG TEMP. WORKIG HUMIDITY EVIROMET STORAGE TEMP., HUMIDITY VIBRATIO TYPE OF PROTECTIO 205 ~ 235% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 33 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover Physical button for reset the bus (Press the RESET button for at least 20 seconds to reset the KX Bus) Green ED (O) :ormal operation Ⅰ Ⅰ Red ED1 (Reset):Reset the bus; Red ED2 (> max ):Overload/Short One integrated choke -30 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +85, 10 ~ 95% RH 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes TYPE OF PROTECTIO IP20 design SAFETY EMC (ote 4) SAFETY STADARDS E ,E approved WITHSTAD VOTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC ISOATIO RESISTACE I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMISSIO Compliance to E ,-5-3;E ;E ,-3-3 OTHERS EMC IMMUITY MTBF DIMESIO MOUTIG PACKIG Compliance to E ,-5-3;E ,3,4,5,6,8,11, heavy industry level, criteria A 109K hrs min. MI-HDBK-217F (25 ) 52.5*90*54.5mm (W*H*D) 35mm mounting rail according to DI E Kg ; 60pcs/13.9Kg/0.97CUFT OTE File ame:kx-20e-spec

3 640mA KX Power Supply KX-20E Block Diagram fosc :65KHz I/P EMI FITER RECTIFIERS FITER POWER SWITCHIG RECTIFIERS FITER O.C.P. CHOKE MODUE BUS -V BUS FG O..P. COTRO DETECTIO CIRCUIT O.V.P. without choke -V without choke Derating Curve Static Characteristics OAD (%) OAD (%) AMBIET TEMPERATURE ( ) (VERTICA) IPUT VOTAGE (V) 60Hz Mechanical Specification 3SU 1 standard unit (SU)=18mm EIB/KX Case o. KX Unit:mm 1 Reset KX bus termnials (Red :+, Black:-) Ancillary power termnials Reset button Power O (Green) Reset (Red) Ⅰ> Ⅰmax (Red) ADMISSIBE DI-RAI:TS35/7.5 OR TS35/15 35 File ame:kx-20e-spec

4 640mA KX Power Supply KX-20E Configuration and Commissioning The does not need any configuration or application program. Typical application Application 1:Powering KX Bus Only KX Bus -V Reset KX-20E ighting HV AC System Blinds Shutters PE Bus wiring consideration: 1. the maximum number of bus s connected is the maximum length of a line segment is 350 m, measured along the line between the power supply and the furthest bus. 3. the maximum distance between two bus s cannot exceed 700 m 4. the maximum length of a bus line is 1000 m, keeping into account all segments Application 2:Powering KX Bus and KX KX Bus Ⅰ1 Ⅰ2 -V Reset KX-20E ighting HV AC System Blinds Shutters PE ote: 1. Use only ancillary output of KX-20E to power the KX 2. The total current Ⅰ1 + Ⅰ2 should be equal or less than 640mA. Ⅰ1 + Ⅰ2 640mA 3. The above Bus wiring consideration is still applicable Recommended Screwdriver, Wire and Torque Setting 1.Screwdriver(Width*Thick):Slotted screwdriver 2.5*0.4~3.5* Wire:0.5~4.0mm solid core or 0.5~2.5mm finely stranded 3.Torque:0.8m Installation Manual Please refer to : File ame:kx-20e-spec

5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery ifecycle Information: MEA WE: KX-20E-640

KNX-20E mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15 KNX-20E_ EH-0817

KNX-20E mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15 KNX-20E_ EH-0817 Bauar t gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 KX-20E_040-01-409-173-EH-0817 640mA KX Power Supply KX-20E-640 Isolation classⅠ Installed on DI rail TS-35/7.5 or 15 File

More information

D R C- 4 0 s e r i e s

D R C- 4 0 s e r i e s LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /

More information

UHP-500 series. 500W Slim Type with PFC Switching Supply

UHP-500 series. 500W Slim Type with PFC Switching Supply Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 500W Slim Type with PFC Switching Supply S&E GB4943 UL950- EN950- IEC950- % - ~+ Industrial automation machinery Industrial

More information

UHP-200 series. 200W Slim Type with PFC Switching Power Supply. File Name:UHP-200-SPEC GB4943 EN EN UL IEC

UHP-200 series. 200W Slim Type with PFC Switching Power Supply. File Name:UHP-200-SPEC GB4943 EN EN UL IEC Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 000000000 GB494 UL950- EN950- EN5- IEC950- % - ~+ R SPECIFICATION MODEL UHP-00 -. UHP-00-4. UHP-00-5 UHP-00 - UHP-00-5 UHP-00-4 UHP-00-6

More information

UHP-350 series. 350W Slim Type with PFC Switching Power Supply

UHP-350 series. 350W Slim Type with PFC Switching Power Supply Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 50W Slim Type with PFC Switching Power Supply GB494 UL950-1 EN950-1 EN5-1 IEC950-1 - ~ Industrial automation machinery Industrial

More information

350W Slim Type with PFC Switching Power Supply

350W Slim Type with PFC Switching Power Supply Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 350W Slim Type with PFC Switching Power Supply S&E GB4943 UL950-1 EN950-1 EN335-1 IEC950-1 % - ~+ Industrial automation machinery

More information

IS 15885(Part 2/Sec13) R ( for 24V only)

IS 15885(Part 2/Sec13) R ( for 24V only) THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic

More information

PB-600 SERIES 600 Watt Battery Charger Power Supply Measures: 9.06 x 6.22 x 2.64

PB-600 SERIES 600 Watt Battery Charger Power Supply Measures: 9.06 x 6.22 x 2.64 Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT INPUT MEAN WELL PB600 SERIES PB60012 PB60024 PB60048 BOOST CHARGE VOLTAGE 14.4V 28.8V 57.6V FLOAT

More information

600W Intelligent Single Output Battery Charger 21A 10.5A VOLTAGE RANGE FREQUENCY RANGE

600W Intelligent Single Output Battery Charger 21A 10.5A VOLTAGE RANGE FREQUENCY RANGE Bauart gepruft Sicherheit egelma ge od o s be wac g 600W Intelligent Single Output Charger PB600 series SPECIFICATION SAFETY & EMC (Note 3) SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION

More information

SELV IP30 (CCC optional)

SELV IP30 (CCC optional) Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP30 level, optional IP67 rating Typical

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PB-300 / 360 USER'S MANUAL SPECIFICATION : PB-300 MODEL BOOST CHARGE VOLTAGE

More information

Features : 3 years warranty PB PB PB V 28.8V 57.6V 13.8V 86% 87% 89%

Features : 3 years warranty PB PB PB V 28.8V 57.6V 13.8V 86% 87% 89% 600W Single Output Charger PB600 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 2) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE RECOMMENDED BATTERY

More information

60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC

60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC Ⅱ { SPECIFICATION MODEL HBG-60-10 HBG-60-10 HBG-60-2 OUTPUT INPUT RATED CURRENT CURRENT ACCURACY EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE

More information

LPF-25 series. 25W Constant Voltage + Constant Current LED Driver

LPF-25 series. 25W Constant Voltage + Constant Current LED Driver F 110 M M SELV IP67 Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP67 level Typical

More information

1000W Intelligent Single Output Battery Charger PB PB PB V 28.8V 57.6V 13.8V 85% 88% 89%

1000W Intelligent Single Output Battery Charger PB PB PB V 28.8V 57.6V 13.8V 85% 88% 89% PB000 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note ) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE OUTPUT CURRENT RECOMMENDED BATTERY 00 ~ 600Ah CAPACITY(AMP

More information

60W Constant Current Mode LED Driver. HBG-60 series. File Name:HBG-60-SPEC

60W Constant Current Mode LED Driver. HBG-60 series. File Name:HBG-60-SPEC 05 SPECIFICATION MODEL OUTPUT INPUT RATED CURRENT RATED POWER CONSTANT CURRENT REGION OPEN CIRCUIT VOLTAGE(max.) CURRENT ADJ. RANGE CURRENT RIPPLE CURRENT TOLERANCE SET UP TIME VOLTAGE RANGE FREQUENCY

More information

Video & Power Over Coax Kit

Video & Power Over Coax Kit VPoC User Manual Video & Power Over Coax Kit 1CH Video Power over Coax w/ 12V DC Receiver Device VPoC24DC-01K VPoC24DC-01 N-42-1 x1 N-41C 4CH / 8CH / 16CH Video Power over Coax Server Kit VPoC24DC-04K

More information

1000W Intelligent Single Output Battery Charger 27.6V 55.2V OUTPUT CURRENT 16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V OVER VOLTAGE PROTECTION

1000W Intelligent Single Output Battery Charger 27.6V 55.2V OUTPUT CURRENT 16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V OVER VOLTAGE PROTECTION auart gepruft Sicherheit egelma ge od o s be wac g 000W Intelligent Single Output attery Charger P000 series SPECIFICTION SFETY & EMC (Note 3) SFETY STNDRDS WITHSTND VOLTGE ISOLTION RESISTNCE EMC EMISSION

More information

Jameco SKU Number:

Jameco SKU Number: Jameco SKU Number: 2105842 60W Single Output with Battery Charger(US Function) SC-60 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE OUTUT NUMBER

More information

PB-600 series. Jameco SKU Number: W Single Output Battery Charger SPECIFICATION MODEL

PB-600 series. Jameco SKU Number: W Single Output Battery Charger SPECIFICATION MODEL .. Jameco SKU Number: 24381 600W Single Output Charger B-600 series SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 2) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE

More information

TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series

TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series /,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05

More information

Switching Power Supplies

Switching Power Supplies Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel

More information

Switching Power Supplies

Switching Power Supplies Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel

More information

DIN Rail Power Supplies

DIN Rail Power Supplies DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced

More information

BP- A Series Switch-Mode 3 Stage Battery Charger User s Manual

BP- A Series Switch-Mode 3 Stage Battery Charger User s Manual BP- A Series Switch-Mode 3 Stage Battery Charger User s Manual Table of Contents 1. Important Safety Information. 1 1-1 General Safety Precautions 1 1-2 Battery Precautions..... 2 2. Features... 3 2-1

More information

+V -V D1 - D2 L N + - M6/8 M10/10 PE L N 13/02/2019 ALIMENTATION 48V 300W-SJN-V8. Code W. Al Jour/Nuit. Alarme. Al Jour. Relais. Relais.

+V -V D1 - D2 L N + - M6/8 M10/10 PE L N 13/02/2019 ALIMENTATION 48V 300W-SJN-V8. Code W. Al Jour/Nuit. Alarme. Al Jour. Relais. Relais. +.. 4-6 ) 1-6 ) 6 1 " & 8 @?! 9 * H EA H I ) = H A I, F = H JI 7 JE EI = JE I * 5 6 ) HK A 6 H O '! $ 5 L HA I M M M > I J=? U1 A1 - + C NCNO +V -V N L D1 - D2 A2 22 12 21 24 14 Relais Alarme A2 A1 14

More information

UCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet

UCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range

More information

5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]

5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA] R AC-DC Power Supplies Configurable type series Ordering information ACO - OOOOOO- OO- OO 6 7 8 9 Recommended EMI/EMC Filter F AC-6-7 F AC--7 6F AC--7 9F AC--7 High voltage pulse noise type : AP series

More information

40A DC UPS Module SPECIFICATION MODEL DC INPUT / DC BUS DR-UPS40 24 ~ 29V 40A 21 ~ 29V 0 ~ 40A 2A 4 / 7 / 12AH / 24V

40A DC UPS Module SPECIFICATION MODEL DC INPUT / DC BUS DR-UPS40 24 ~ 29V 40A 21 ~ 29V 0 ~ 40A 2A 4 / 7 / 12AH / 24V 40A DC US Module Jameco SKU Number: 2103273 DR-US40 SECIFICATION MODEL DC INUT / DC BUS BATTERY INUT / OUTUT FUNCTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE (Typ.) RATED CURRENT VOLTAGE RANGE

More information

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%] Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and

More information

Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W

Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W 2019-V1.0-0318 Specifications AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail

More information

5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]

5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA] Recommended EMI/EMC Filter ACEF AC-6-7 ACEF AC--7 ACE6F AC--7 ACE9F AC--7 High voltage pulse noise type : AP series ow leakage current type : AM series *The EMI/EMC Filter is recommended *to connect with

More information

Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies

Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:

More information

Test Report: UHP

Test Report: UHP Test Report: UHP-500-36 500W Slim Type with PFC Switching Supply DESIGN VERIFY TEST Output Function Test Input Function Test Protection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test

More information

PS6R 480W Switching Power Supply

PS6R 480W Switching Power Supply ew Series PS6R 4W Switching Power Supply Reduced size and high efficiency cuts operating costs. Energy-saving 93% Efficiency Space-saving 85mm wide Efficiency (%) 96 94 92 88 86 84 82 Competitor A Competitor

More information

TDK-Lambda ZWS240BP/A SPECIFICATIONS

TDK-Lambda ZWS240BP/A SPECIFICATIONS SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average

More information

Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.

Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs. Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module

More information

TDK-Lambda ZWS300BAF/A

TDK-Lambda ZWS300BAF/A ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4

More information

Open Frame Power Supplies

Open Frame Power Supplies , 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and

More information

Switching Power Supplies

Switching Power Supplies , 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals

More information

MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models

MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)

More information

Zurik EMLV LED Driver

Zurik EMLV LED Driver White Zurik EMV Dimmable Driver (Phase Dimming) For Forward Phase, MV, Reverse Phase, and EV Model: ZRK-EMV-120-24VDC : 100-130V~ 2A 50/60 Hz λ: 0.65 : 24V 5A COFORMS TO U STD.1012 CERTIFIED TO CSA STD.C22.2

More information

Switching Power Supplies

Switching Power Supplies Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency

More information

UNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up

UNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up SERIES 350PB, PN 350PB/350PN Specifications CH 2 3 5 Voltage Range (*)(*8) V AC85-265 (AC85-5 : Need output derating) Frequency (*)(*8) Hz 7-63 Power Factor (00/20VAC)(typ) (*5) 0.98 / 0.92 (Ta=25) Input

More information

INDUSTRIAL POWER SUPPLIES SFL-SERIES

INDUSTRIAL POWER SUPPLIES SFL-SERIES INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial

More information

Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W

Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W 2019-V1.0-0118 Specifications AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail

More information

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage

More information

DC DC Converter High Precision constant voltage high efficiency dedicated to the LED panel MODEL: EF-DC-8A

DC DC Converter High Precision constant voltage high efficiency dedicated to the LED panel MODEL: EF-DC-8A DESCRIPTION: EF-DC-8A DC DC Converter, high efficiency Up to 96%, Use Aluminum solid capacitors. long life of 50,000 hours, high-precision constant voltage output, dedicated to 90w the following, all types

More information

GB60S 60W Single Output General Purpose Series

GB60S 60W Single Output General Purpose Series Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency

More information

Constant Voltage TRIAC Dimmable Driver---120W Series. Features

Constant Voltage TRIAC Dimmable Driver---120W Series. Features Features Specification Output constant voltage Universal AC input: 90-130VAC.Power Factor:up to 0.95 High Efficiency: up to 84% Protections: short circuit / over loading / over current Full protection

More information

Features. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter

Features. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation

More information

Features. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual

Features. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual Features Unregulated Converters Low cost 2W converter Industry standard SIP7 package 3kVDC or 4kVDC isolation options Single or dual outputs Short circuit protected (/P versions) EN62368-1 DC/DC Converter

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage

More information

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%] Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified

More information

Features. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter

Features. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power PRO EZ-3, 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with I interface and automatic test function For self-contained emergency lighting

More information

RUZ- _/_ Protection (3) Isolation Option (4)

RUZ- _/_ Protection (3) Isolation Option (4) Features Unregulated Converters Description Dual output from a single input rail 1kVDC or 2kVDC input/output basic isolation 1kVDC output/output isolation Power sharing on outputs Optional continuous short

More information

Test Report: GST18A24-P1J

Test Report: GST18A24-P1J Test Report: GST18A24-1J 18W AC-DC High Reliability Industrial Adaptor DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power BASIC 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60

More information

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E) Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters

More information

DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power

DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS

More information

DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS

More information

DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND

More information

4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)

4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide

More information

Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]

Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%] Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The

More information

PRODUCTS: POWER SUPPLY

PRODUCTS: POWER SUPPLY PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER

More information

DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power

DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT

More information

MD60 Series 60W DINergy Power Supply

MD60 Series 60W DINergy Power Supply MD60 Series 60W DINergy Power Supply Features Compact size, high efficiency and DIN Rail mounting 60 C rated provides full power/no derating required 100-240VAC wide-range auto-selection input Overcurrent,

More information

DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES

DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36

More information

Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.

Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting. DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High

More information

Test Report: IRM-45-12

Test Report: IRM-45-12 Test Report: IRM-45-12 45W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C.

More information

Industrial Power Supplies

Industrial Power Supplies , Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with

More information

DC (on) LED Signal. Multiple output connector for easy wiring

DC (on) LED Signal. Multiple output connector for easy wiring DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage

More information

100W Single Output Switching Power Supply NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT

100W Single Output Switching Power Supply NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT MODEL:LPV-100-24 OUTPUT FUNCTION TEST 1 RIPPLE & NOISE V1: 150 mvp-p (Max ) V1: 6 mvp-p (Max ) 2 OUTPUT VOLTAGE TOLERANCE V1: -5 %~ +5 % (Max) I/P: 100VAC / 264 VAC O/P:FULL/ 0% LOAD V1: -0.36%~ +0.2 %

More information

Low Profile DC Power Supply with Zero Voltage Soft Switching

Low Profile DC Power Supply with Zero Voltage Soft Switching Sorensen XFR Series Low Profile DC Power Supply with Zero Voltage Soft Switching Analog programming Zero voltage soft switching Constant voltage or constant current operation with automatic crossover and

More information

DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power

DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW

More information

Advanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC

Advanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.

More information

ELECTRONIC SOFT STARTER

ELECTRONIC SOFT STARTER ELECTROIC SOFT STARTER V2 Voltage range from 230V - 400V and power from 2.2kW - 37kW Multiple built-in motor protections Wide temperature range from 0 to +50 C (IP54)/40 C (IP00) Available with internal

More information

Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter

Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,

More information

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)

2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G) Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC

More information

LS200 Series Instruction Manual

LS200 Series Instruction Manual LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit

More information

Power Supplies. Automation & Sensing.

Power Supplies. Automation & Sensing. Automation & Sensing Selection Guide... 166 PS6R Standard Series... 167 Part umbers... 167 Specifications... 168 Dimensions... 17 PS5R-V Series... 174 Part umbers... 174 Specifications... 175 Dimensions...

More information

PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.

PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ. 0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:

More information

Advanced Battery Charger 0 ~ 15A 0 ~ 25A 0 ~ 35A 0 ~ 50A 0 ~ 80A. 3 - stage charging capability (IUOU) 90 ~ 264VAC (refer to de-rating curve)

Advanced Battery Charger 0 ~ 15A 0 ~ 25A 0 ~ 35A 0 ~ 50A 0 ~ 80A. 3 - stage charging capability (IUOU) 90 ~ 264VAC (refer to de-rating curve) Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.

More information

Load (2) Single or Dual

Load (2) Single or Dual Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout

More information

ABB i-bus EIB EIB Power Supply Units SV/S SV/S SU/S

ABB i-bus EIB EIB Power Supply Units SV/S SV/S SU/S Product Manual ABB i-bus EIB EIB Power Supply Units SV/S 30.320.5 SV/S 30.640.5 SU/S 30.640. Intelligent Installation Systems Contents Page EIB Power Supply Units. Introduction.........................................

More information

CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*

CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES* CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011

More information

4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required

4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame

More information

RWS50B RWS100B RWS150B RWS300B RWS600B

RWS50B RWS100B RWS150B RWS300B RWS600B RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership

More information

(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency

(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency SERIES (DC/DC) "TESLA Converter" (next-generation power supply) adopted : ultra small size and super high efficiency.chassis module/open-frame type Super high efficiency 94.5 to 96.5% (typical) Ordering

More information

Advanced Battery Charger. 3 - stage charging capability (IUoU) 25A

Advanced Battery Charger. 3 - stage charging capability (IUoU) 25A Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.

More information

ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating

ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to

More information

ZWD100PAF Series Instruction Manual

ZWD100PAF Series Instruction Manual Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.

More information

ZWD225PAF Series Instruction Manual

ZWD225PAF Series Instruction Manual Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.

More information

Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)

Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2) Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high

More information

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off

More information

C B. Operating up to 5000m altitude 5 year product warranty Models

C B. Operating up to 5000m altitude 5 year product warranty Models DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd

More information

CX-SERIES ADVANCED BATTERY CHARGER

CX-SERIES ADVANCED BATTERY CHARGER CX-SERIES ADVANCED BATTERY CHARGER Table of Content 1. IMPORTANT SAFETY INFORMATION... 2 1-1 General Safety Precautions... 2 1-2 Battery Precautions... 2 2. FEATURES... 3 2-1 Battery Charging Curve...

More information

HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES

HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range

More information