CERAMICS. Fans / Exhaust fans. Balls / Hammer Mills Rollout Tables GLASS. Fans / Exhaust fans. Rollout tables REFRIGERATION.

Size: px

Start display at page:

Download "CERAMICS. Fans / Exhaust fans. Balls / Hammer Mills Rollout Tables GLASS. Fans / Exhaust fans. Rollout tables REFRIGERATION."

Emory French
5 years ago
Views:

1 SSW07 Soft Starters are static starting switches, designed for the acceleration, deceleration and protection of the three phase, electric, induction otor through the control of the voltage applied to the otor. The SSW07, with DSP control (Digital Signal Processor) was designed to provide great The SSW07 is copact, contributing to optiized space in electric panels. The SSW07 incorporates all electric otor protections. The SSW07 adapts to custoer needs through its easy-to-install optional accessories. Thus, a keypad, a counication interface or a otor PTC input can be added to the product. APPLICATIONS CHEMICAL AND PETROCHEMICAL BEVERAGES CERAMICS STANDARD FEATURES Strong reduction on echanical stresses over the coupling and transission Centrifugal Pups Dosing / Process Pups Copressors Soap Extruders PLASTIC AND RUBBER Extruders Injectors / Blowers Mixers Rollers / Pullers Granulators PAPER AND PULP Dosing Pups Process Pups Rotating Filters Rotating Ovens Wood Chip Conveyers Rollers Coaters SUGAR AND ALCOHOL Process Pups Rollout tables Bottling lines CEMENT AND MINING Dosing / Process pups Pups Sifters (Sievers) / Vibrating Tables Dynaic Separators Dozers FOOD AND RATION Dosing / Process pups Fan / Exhaust fans Driers / Continuous Ovens Pelletizers Conveyors / Monorails TEXTILE Driers / Washers METALLURGY Fans / Exhaust Fans Conveyors Drills / Grinders Wire Drawing Pups Driers / Continuous ovens devices (gearboxes, pulleys, gears, conveyors, etc.) during the start Balls / Haer Mills Rollout Tables Eliinates echanical shock Increases otor and achine echanical equipent lifetie due to the elii- GLASS nation of echanical shock Bottle anufacturing achine Easy operation, setup and aintenance Rollout tables Siple electric installation Operates in environents up to 55ºC (without current reduction for all odels) REFRIGERATION Process Pups Integral, electronic otor protection Built-in electronic theral relay Air conditioning systes Kick-Start function for starting high Screw / Piston copressors breakaway torque loads Avoids the Water Haer in pups WOOD Liitation of voltage drop during start Sanders Universal voltage (220 to 575 Vac) Cutters Switched type power supply with EMC Wood chippers Saws and Planers 240 Vac) SANITATION Centrifugal pups bypass providing size reduction and energy saving Suppression systes LOAD TRANSPORTATION Voltage onitoring of the electronics to Conveyors / Belts / Chains back-up l x t values (theral iage) Rollout tables Monorails / Hoist Escalators Baggage Conveyors (Airports) S C-45

2 SSW07 IP20 FRAME SIZE 1 & 2, IP00 FRAME SIZE 3 SOFT STARTERS TECHNICAL DATA S SSW07 ACCESSORIES C-46 Data subject to change without notice.

3 STARTING METHOD COMPARISON S TYPICAL STARTERS APPLICATIONS AND INDICATIONS C-47

SSW07 ACCESSORIES AND OPTIONS The SSW07 Soft Starters can be interconnected to quick FieldBus counication networks, through Modbus RTU protocol.

providing integrated syste applications.

4 SSW07 ACCESSORIES AND OPTIONS The SSW07 Soft Starters can be interconnected to quick FieldBus counication networks, through Modbus RTU protocol. Mainly designed to integrate large industrial autoation plants, the quick counication networks provide advantages in supervision, onitoring and control, online and coplete, over the Soft Starters, providing integrated syste applications. For interconnection in FieldBus type counication networks, the SSW07 Soft Starters allows the installation of plug-in type optionals on the front of the product. There are optional odules for the Modbus RTU protocol for counication in RS-232 or RS-485. S HMI-LOCAL-SSW07 paraeter visualization fro distance. The interface incorporates the Copy function, which perits to copy the paraeterization fro a SSW07 to other ones, providing fast prograing, reliability and repeatability in serial anufacturing achinery. Plug-in type MMI in front of product. KSDG2-SSW07 Software in Windows platfor, for SSW07 paraeterization, coand and onitoring. the SSW07 Superdrive G2 software is acquired SOFT STARTERS TECHNICAL DATA HMI-REMOTE-SW07 Reote HMI for placing in panel door or achinery console. Cable for connecting MMI to SSW07. Cable length: 1, 2, 3, 5, 7.5 and 10. C-48 Data subject to change without notice.

SSW07 ACCESSORIES AND OPTIONS CAB-COMM-3 OR CAB-COMM-10 Cable for connecting RS-232. Cable length in 3 and 10. COMMUNICATION MODULES gateway MFW-01/PD.

5 SSW07 ACCESSORIES AND OPTIONS CAB-COMM-3 OR CAB-COMM-10 Cable for connecting RS-232. Cable length in 3 and 10. COMMUNICATION MODULES gateway MFW-01/PD. KIT-PTC-SSW07 Optional odule for otor PTC connection. S SSW07-VENT KIT-M2 OR M3 For odels fro 45 A to 200 A. A ventilation kit is necessary or heavy duty starting cycle. C-49

VOLTAGE KICK START Enables an initial voltage pulse which, aplied to the otor, provides initial starting torque reinforceent. This isnecesary for starting high breakway torque loads.

6 SSW07 PROGRAMMING FEATURES S All prograing necesary for starting any type of load is available through tripots and dip-switch. Voltage rap Perits sooth aceleration and/or decelera - tion, through voltage raps. Curent liit Perits to set the curent liit during the start, acording to the aplication requirients. VOLTAGE KICK START Enables an initial voltage pulse which, aplied to the otor, provides initial starting torque reinforceent. This isnecesary for starting high breakway torque loads. BUILT-IN BY-PAS Built-in by-pas iniizes power loses and heat disipation in the thyristors, providing size reduction and contributing toenergy saving. This is available in all odels. Diensio ns and wei - SW07017 SW07024 SW07030 SW-SWSW Model Height H 162 (6.38) Width L 95 (3.74) Depth. P 157 (6.18) A 85 (3.35) B 120 (4.72) C (0.20) 5 D (0.16) 4 Fixing screw M4 Wei - ght kg (Ib) 1.3 (2.9) Enclosu - re IP20 SW07045 SW07061 SW07085 SW SW SW (8.19) 276 (10.9) 14 (5.67) 23 (8.78) 203 (7.99) 20 (8.6) 132 (5.2) 208 (8.19) 148 (5.83) 210 (8.27) (0.24) 7.5 (0.3) (0.13) 5 (0.2) M4 M5 3.3 (7.28) ) IP20 IP0* SOFT STARTERS TECHNICAL DATA Table 3.1 Data for installation with diensions in (in) *Option for IP20 Kit C-50 Data subject to change without notice.

7 Power Supply Enclosure Control SSW07 TECHNICAL SPECIFICATIONS Power Control Frequency Injected plastic Control Method CPU Types of Control (1) For the 45 to 200 A currents using the ventilation kit. 220 to 575 Vac 110 to 240 Vca (-15% to +10%), or 94 to 264 Vac 50 to 60 Hz (+/- 10%), or 45 to 66 Hz IP20 in odels fro 17 to 85 A IP00 in odels fro 130 to 200 A (IP20 as option) Voltage variation over the load (three-phase induction otor) DSP type icrocontroller (Digital Signal Processor) Voltage rap Current liitation Starting Cycle (1) Noral 300% (3 x Ino.) during 30 s, 10 starts per hour ( every 6 inutes) Inputs Digital 3 isolated prograable inputs Outputs Relay 02 relays with NO contacts, 240Vac, 1A, prograable functions Safety Functions / Resources Prograing Accessory (MMI or Serial counication) Accessories and Options Finishing Conforities / Standards Protections (Standard) Protections (with Accessory) Standard Coand Additional Functions / Resources Supervision (Reading) Options Color Safety Low voltage EMC UL (USA) / cul (Canada) CE (Europe) C-Tick (Australia) GOST (Russia) Overcurrent; Overcurrent before By-pass Phase loss; Inverted phase sequence; Overteperature in power heatsink; Motor Overload (class 5 to 30) Undercurrent Current ibalance Subcurrent before By-pass External defects Voltage rap (Initial voltage: 30% to 90%) Current liitation (150% to 450% of SSW-07 rated current) Starting tie (1 to 40s) Kick Start (Off - 0,2 to 2s) Deceleration rap ( 0 to 40s) Motor and SSW-07 current relation (50% to 100%) Faults auto-reset Theral eory auto-reset Factory standard reset Soft-starter built-in By-pass Locked Rotor Excess starting tie Frequency outside tolerance By-pass contact open Undervoltage in control supply Prograing error Serial counication error MMI counication error Overteperature in otor PTC On, Off / Reset and Paraeterization (function Prograing) Starting tie up to 240s Deceleration tie up to 240s Progra enabling password Selection for Local / Reote operation COPY function (SSW-07 >>> MMI and MMI >>> SSW-07) Prograable rated voltage Motor current (%Soft-Starter In) Motor current (%otor In) Motor current (A) Current indication in each phase R-S-T Supply network frequency Apparent power supplied to load (kva) Soft-Starter status Digital input and output status Back up of 4 last errors Soft-Starter Software Version Heatsink teperature Motor theral protection status Plug-in type local MMI MMI reote Kit 1,2,3,5,7.5 and 10 for reote MMI interconnection RS-232 counication kit SSW-07 interconnection cables>>> PC Serial (RS-232) 3 and 10 RS-485 counication kit Motor PTC kit Ventilation kit for size 2 (45 to 85 A) Ventilation kit for size 3 (130 to 200 A) IP20 kit for size 3 (130 to 200 A) Lid: Gray Ultra Mat Cabinet: Blue Ultra Mat UL 508 Standard- Industrial Control Equipent EN ;LVD 2006/95/EC Standard Low voltage Directive EMC 89/336/EEC Directive Industrial Environent Underwriters Laboratories Inc. USA Confority test conducted by EPCOS Australian Counication Authority S C-51

Benefits. transmission devices (gearboxes, pulleys, gears, conveyers, etc) Soft-Star ters are static star ting switches, designed for the

Benefits. transmission devices (gearboxes, pulleys, gears, conveyers, etc) Soft-Star ters are static star ting switches, designed for the Soft-Starter Benefits Strong reduction on mechanical stresses over the coupling and transmission devices (gearboxes, pulleys, gears, conveyers, etc) Soft-Star ters are static star ting switches, designed