S C ELECTRIC EUROPE LTD. Excellence Through Innovation. Harnessing the Wind. November 2011 Descriptive Bulletin E

Transcription

1 S C ELECTRIC EUROPE LTD. Excellence Through Innovation Harnessing the Wind November 2011 Descriptive Bulletin E

2 Introduction Founded in 1911, S&C Electric Company is a global provider of equipment and services for electric power systems. The Chicago based company designs and manufactures switching and protection products for electric power transmission and distribution. S&C Electric Europe Ltd. commenced operation in the region in 2008 when S&C Electric Company recognised the need to have local sales and engineering support in the area due to the increase in sales. Since this date, S&C Electric Europe Ltd. has been providing electrical switching and protection equipment including leading edge solutions for implementing smart grids and integrating renewable resources to utilities and large power users throughout the European Union, Middle East and Africa. S&C Electric Europe Ltd. is a wholly owned subsidiary of S&C Electric Company and is part of the S&C global network of regional business units. S&C Electric Europe Ltd. is headquartered in Swansea, Wales with additional offices in Manchester and Abu-Dhabi and covers Europe, the Middle East and Africa. S&C Electric Europe headquarters in Swansea Manchester office Abu-Dhabi office Based in Manchester, S&C Electric Europe Ltd. Power Systems Services offers comprehensive transmission and distribution services and can readily take your project from the initial evaluation stage through site selection, construction management and start-up. Our experienced engineers are qualified in undertaking a comprehensive range of system studies. S&C has over 100 years experience in the power delivery industry and our commitment is backed by an experienced staff of engineering professionals, technicians and industry experts. Where S&C can help S&C Vista Circuit Switcher or TransRupter This simplified single line diagram shows the places where S&C equipment can be used. DSTATCOM or PCS S&C Vista S&C Vista S&C Hybrid DSTATCOM or Energy Storage Detailed Analytical Studies Assure Conformance to Interconnection Requirements As the first step in designing a wind farm, S&C s transmission and distribution planning team will perform detailed simulations to verify that the ratings and performance characteristics of the proposed equipment will meet interconnection requirements set forth by the local grid codes. S&C uses Power Technologies Incorporated s PSS/E and DIGSILENT software to model the grid as well as the wind turbine generators manufactured by the major wind turbine manufacturers. The planning team will prepare a transient stability study to determine how the proposed equipment will react to faults, tripping of a transmission line with and without autoreclosing, tripping of a generator, and/or load shedding. The goal is to verify that the wind turbines will remain stable after the electrical disturbance. 2 S&C ELECTRIC EUROPE LTD.

3 As required, S&C s study team can also prepare a variety of other analytical studies: l A reliability study will help you maximise the efficiency and safety of your electric power system l A switching transient study will yield solutions to problems associated with the switching of capacitor banks or shunt reactors l A loadflow study will determine how your system responds to transmission system contingency conditions, and if components such as transformers and conductors are overloaded. Shunt capacitors, reactors, and/or adaptive, static, or inverter based VAR compensators may be needed to maintain system voltages within specified limits l A voltage support study will determine the optimum ratings and placement of reactive power support devices l Grid Compliance studies to prove solutions meet local codes l Harmonic studies to determine the impact of connection including the sizing of any harmonic mitigation needed The PureWave DSTATCOM offers: l Suitability for voltage control or power factor control applications l Inverter based technology available up to ±40 MVAR, with system ratings up to 100 MVAR when applied with mechanically switched capacitor banks l Response time of 2 to 4 milliseconds l Flexible packaging: fixed in place or transportable l Modular design available in multiples of ±1.25 MVAR; completely self-contained l Short time capability, providing extra support during faults l Extensive remote communication and self-diagnostic capabilities l Ease of adding N+1 redundancy to achieve higher availability S&C s Power Quality Products Will Help You Meet Local Grid Code Requirements Too ±1.25 DSTATCOM, Orkney Isles, Scotland Hybrid DSTATCOM Solutions S&C is amongst the largest supplier of power quality products in the world. S&C s experience in manufacturing and installing these products, benefit both the wind farm developer and owner in meeting the low voltage ride through and power factor guidelines set forth by local grid code. S&C s power quality products presently protect over 500 MVA of critical load around the world in a wide variety of applications. S&C understands the cost drivers for a wind development and is able to offer a hybrid solution to keep installed costs to a minimum. These solutions include Point on Wave Switched Capacitors and Switched Reactors coupled with De-Tuning Reactors or Harmonic filters when required, to ensure minimum impact on the grid due to operation. The PUREWAVE DSTATCOM is suitable for voltage support on weak grids and has been used by utility companies for voltage support on turbines as small as 850kW. PureWave DSTATCOM S&C products specifically designed to address voltage regulation and power factor issues are the PureWave DSTATCOM Distribution Static Compensator. Each provides the dynamic (or fast ) VARs needed to reduce the impact of fluctuations in wind farm output on the distribution system. They can provide a stable system voltage transmission or a specific system power factor, depending on the control mode utilised. The PureWave DSTATCOM can also be used to support distribution system voltage during low voltage ride through events which would otherwise cause the wind turbines to trip off-line. ±7.5 DSTATCOM, Scotland DSTATCOM controlling 2 Capacitor Banks and 1 Reactor Excellence Through Innovation 3

4 Power Fuses Switches S&C s range of Power Fuses provide a low cost alternative for the protection of cables and transformers used within wind farms. The product range is suitable for both indoor and outdoor use and can be applied at voltages up to 138kV. Power Fuses are offered with a variety of continuous current ratings, in a variety of fault-interrupting ratings, a wide range of ampere ratings and different speeds of operation, so they can be readily coordinated with protective relays, circuit reclosers, and other fuses. This broad selection of ampere ratings and speeds permits close fusing to achieve maximum protection and optimum coordination. S&C s range of switches provides no external arc circuit interruption with continuous ratings up to 1200 amperes up to 46kV. When used with motor operation for remote supervisory operation this provides a low cost alternative for line, transformer and cable switching particularly for unmanned substations. AldutiRupter SMD fuse 4 S&C ELECTRIC EUROPE LTD.

5 SmartGrid Storage Management System SmartGrid Storage Management System at DESS Bluffton Station S&C s SmartGrid Storage Management System allows better utilisation of renewable energy such as wind power. It offers megawatt hours of energy storage for SmartGrid applications, permitting this power to be dispatched when it s most valuable. Power generated off-peak can be used during periods of peak usage, dramatically reducing the greenhouse gases produced by traditional generating sources, and displacing peak energy costs with off-peak costs. The SmartGrid Storage Management System extends the life of existing equipment and improves asset management. It can defer or eliminate the need for additional generation, which can greatly reduce associated carbon emissions. The system features a fast responding automatic controller interface between the grid and a stored energy source, such as a sodium sulfur battery system. The controller can address power production peaks and valleys, VAR control of generation, and SCADA control of wind production. It can also improve the integration of wind generation into the standard generation production schedule. Dynamic islanding can be achieved by applying the IntelliTEAM II Automatic Restoration System, in combination with the SmartGrid Storage Management System. Dynamic islanding is implemented upon loss of power to the feeder from the serving substation. Service is restored to the maximum possible number of customers, based upon load information captured by IntelliTEAM II equipped devices before the loss of power and the amount of energy available in the battery. The island is minimised as the battery is depleted and/or power is restored to the feeder. DESS Bluffton Station, USA Excellence Through Innovation 5

6 Other S&C Products for Wind Farm Application Vista is suitable as a low cost, compact, outdoor collector system to provide local protection of the Purewave DSTATCOM transformers. It is low profile and suitable for outdoor. Reducing the need for additional circuit breakers at the substation. Vista Underground Distribution Switchgear S&C Vista Underground Distribution Switchgear, available in rating up to 38kV, features elbow connected components enclosed in a compact, submersible, SF6 insulated, welded steel tank, completely protected from the environment. Vista gear is offered in the low profile pad mounted models, as well as models that can be installed underground. A special single way model has been designed for wind farm applications. This model is installed in the base of the control tower and is small enough to fit through the tower door. It provides the connection point for each individual wind turbine and is available in IEC and ANSI Ratings. TransRupter II Transformer Protectors Windfarms can be connected to the utility system in a variety of ways. Circuit breakers can be used but require costly external relays, a control house, and an external power supply. Breakers also require ongoing maintenance. S&C TransRupter II Transformer Protectors, on the other hand, need no external relays, control house or external power supply. They re designed specifically for primary side application on substation transformers rated 33kV rating up to 138kV and combine the sophisticated protection capabilities of circuit breakers with the simple installation procedures and minimal maintenance requirements of lower cost power fuses. Turbine Vista Switchgear 6 S&C ELECTRIC EUROPE LTD.

7 S&C Circuit Switchers Circuit Switchers are another versatile, lower cost alternative to circuit breakers. Available in ratings of 33kV rating up to 230kV, Circuit Switchers are multi-purpose devices for transformer switching and protection, capacitor bank switching and protection, reactor switching and protection, and line and cable switching. Specific models can be furnished with pre-insertion inductors the industry standard for reducing inrush current and transient overvoltages when switching capacitor banks. Local Support S&C Europe through it s offices in Swansea and warehousing throughout Europe is able to provide local spares which are critical to the high availability requirements of wind farms. S&C Europe has qualified service and commissioning Engineers in the UK that can support installation through to final grid compliance. Experienced Project Managers can supervise full Turnkey installation if required. Excellence Through Innovation 7

8 S C ELECTRIC EUROPE LTD. Excellence Through Innovation Princess House Princess Way Swansea SA1 3LW United Kingdom Tel: Fax: Manchester Business Park 3000 Aviator Way Manchester, M22 5TG United Kingdom Tel: Fax: Abu Dhabi Sales Office P.O. Box 45174, Mufleh Tower Mezzanine Floor, M3 Abu Dhabi, UAE Tel: Fax: sales.europe@sandc.com INVESTOR IN PEOPLE RW GR