Date & Price List I.D. Number. Price per loaded mile $

Size: px
Start display at page:

Download "Date & Price List I.D. Number. Price per loaded mile $"

Transcription

1 04/2013 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Bert's Truck Equipment of Moorhead, Inc Contact Person: Jim McLaughlin, Government Fleet Sales Street Address: 3804 Highway 75 North P.O. Box: PO Box 336 City, State, Zip Moorhead, MN Phone #: Toll Free #: Fax #: Address: jimmc@bertsonline.com Website: PRICING METHOD 2 - PERCENTAGE DISCOUNT OFF LIST 1.0 CRANE/MAKE Warranty Liftmoore Electric & Hydraulic Cranes Various Models One Year from In-service Date Percentage Discount to be applied to Price List 0 Date & Price List I.D. Number 6-Jun OPTIONS See Attached Price Schedule starting with 2.1, 2.2, etc EXTENDED WARRANTY OPTIONS (Specify years, miles or hours extended term covers.) Price: N/A 4.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip Moorhead, MN Price per loaded mile $ NEW EQUIPMENT RENTAL PROGRAM Hourly Rental Rate: Weekly Rental Rate: Monthly Rental Rate: Percent (%) of Rental Fee applied to purchase price: N/A N/A N/A N/A If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 6.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price N/A 7.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0 AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number June 6,2013, Bert's Truck Eq 8.0 INSTALLATION SERVICES MAY BE REQUESTED ON AN AS NEEDED BASIS. See Special Terms and Conditions $ /Hour NOTE: The Discount to be Applied to Price List" must be a numberic percentage. Not listing a numberic percentage may result in your bid being rejected.

2 Bert's Contract Price Notice of New Crane requirements when used in the Construction Industry as per OSHA (Standard - 29 CFR) Safety and Health Regulations Cranes in Construction (d)(2) Equipment Manufactured after NOV 8, 2011 with a lifting capaity of 2,000 Lbs or less that is used in the construction industry are required to have an anti two-block device that meets the requirements of (d)(3) Item Optional ANTI Two-Block added to any 2,000 Lbs crane at time of Order 1.00 The Anti Two-Block is not offered on the L-8 Crane. Not avalible as a retrofit. $ L Series 1.01 L-8 ( ) 4500 Ft-Lb. Moment Rating. Capacity 800 Lbs. at all Load Radii Boom telescopes manually from 3 Ft. to 5 Ft.

3 25 Ft. of 3/16 In. Galvanized Aircraft Cable Ft. long Pendant Control. 25 Ft. Battery Wire, Ground Wire and 150 Amp. Circuit Breaker. Shipping Weight: 425 Lbs L-21 ( ) 6000 Ft.-Lb. Moment Rating. Capacity 2000 Lbs. at 3 Ft. Boom telescopes manually from 3 Ft. to 5 Ft. Includes 25 Ft. of 3/16 In. Galvanized Aircraft Cable. Includes Traveling Block Ft. Remote Pendant Control. 25 Ft. of Battery Power Cable, 3 Ft. Battery Ground Cable and 150 Amp. Circuit Breaker. Shipping Weight: 430 Lbs L-21-7 ( ) Same as L-21 above except boom telescopes from 3' 3" to 7' 3" in two stages. Shipping Weight: 450 Lbs L-21W ( ) Same as L-21 except with larger 2.7 HP, 2000 lbs single line pull capacity winch, includes 62 ' of 1/4" Galvanized Aircraft Cable with Hook and Safety latch Shipping Weight: 500 Lbs L-21W-7 ( ) Same as L-21W except boom length telescopes from 3' 3" to 7' 3". Shipping Weight: 510 Lbs. $ 1, $ 2, $ 2, $ 3, $ 3, NOTE: For Service Body Corner Mount, order shortened pedestal, deduct $40.00 from List Price. $ (40.00) Manual Rotation 206EL EL ( ) 6,500 Ft. - Lbs. Moment Rating Lbs. capacity at a 3 Ft. load radius. Boom Length 5 1/2 Ft. to 9 Ft. manualy extended Power Up, Gravity Down Boom Elevation Load Sensor Included Efficient Planetary Gear Winch with Permanent Magnet Motor. Includes 35 Ft. of 3/16" Galvanized Aircraft Cable. 18 Ft. Remote Pendant Control Travel block for double line use above 1000 Lbs. $ 4,260.00

4 Shipping Weight 485 Lbs NOTE: $ Upgrade with larger 2.7 HP, 2000 lb single line pull capacity winch and 62 Ft. of wire rope for below ground level use. Travel block replaced with down haul pickle weight NOTE: For Service Body Corner Mount, order shortened pedestal, deduct $40.00 from List Price $ (40.00) 2000A A ( ) 6,000 FT.- Lb. Moment Rating Lbs. capacity at a 3 Ft. load radius Boom Length 5 1/2 ft. to 9 Ft. manualy extended Efficient Planetary Gear Winch with a 2.7 HP Permanent Magnet Motor. Single Line capacity of the winch is 2000 Lbs. 40 Ft. of 1/4" Galvanized Aircraft Cable is standard 12 Ft. Pendant Contrtol Manual Rotation and Manual Boom Elevation 25 Ft. of Battery Power Cable, 3 Ft. Ground Wire and 150 Amp Circuit Breaker. Shipping Weight: 490 Lbs. $ 3, Accessories (Outriggers, etc.) are listed at the end of this price list. Power Rotation 206R & 206REL 6,500 Ft-Lbs. Moment Rating 2000 Lbs. capacity at a 3 Ft. Radius Efficient Planetary Gear Winch with Permanent Magnet Motor. Boom length is 5.5 Ft. manualy extended to 9 ft. Includes 35 Ft. of 3/16" Galvanized Aircraft Cable. Travel block for double line use above 1000 Lbs. Can be easly adapted to either Flat Bed or Utility Body Corner Mount R ( ) Power Rotation, Manual Boom Elevation Rotation is Continuous and Unlimited. Rotation is powered by a 12V Dc Electric Motor. Gas Spring used for assisting boom Elevation. Shipping Weight 465 Lbs. $ 4, REL ( ) Power Rotation and Boom Elevation. Rotation is Continuous and Unlimited. Rotation and Boom elevation are powered by a

5 12V Dc powered Hydraulic pump. 18 Ft. Remote Pendant Control A load limiting sensor is included. Shipping Weight: 525 Lbs. $ 6, NOTE: $ Upgrade with larger 2.7 HP, 2000 lb single line pull capacity winch and 62 Ft. of wire rope.for below ground level use. Travel block replaced with down haul pickle weight NOTE: For Service Body Corner Mount, order shortened pedestal, deduct $40.00 from List Price $ (40.00) Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE LA6K 6,600 Ft-Lbs. Moment Rating 2000 Lbs. capacity at a 3 Ft. Radius efficient Planetary Gear Winch with Permanent Magnet Motor. includes 50 Ft. of 3/16" Galvanized Aircraft Cable. continuous and unlimited power rotation, rotates on a ball bearing slewing ring, driven by a low speed high torque hydraulic motor. power boom extension from 5.5 to 8.5 ft with a manual pull out to 11.5 ft. hydraulic elevated boom to 75 degrees. boom folds vertically for storage load sensor is standard travel block for easy two part line hook up 18 ft long wired pendant control 25 ft of Battery Power cable, 3 Ft. Battery Ground wire, 150 Amp Circuit Breaker. Master Disconnect Switch LA6K EX-11 $ 8, ( ) Shipping Weight: 1250 Lbs. Accessories (Outriggers, etc.) are listed at the end of this price list.

6 12V D. C. ELECTRIC CRANE 208EL and 2700AR EL-10 8,100 Ft.-Lb. Moment Rating. 12 V. D. C. Planetary Gear Winch. 62 Ft. of 1/4 In. Galvanized Aircraft Cable. Pendant Control is 3 Ft. longer than the extended boom. 25 Ft. of Battery Power Cable, 3 Ft. Battery Ground Wire, Circuit Breaker and Master Cutoff Switch included. Load sensor is Standard Max Capacity 2000Lbs at 4 Ft. Manual Rotation Power up Gravity down boom elevation Boom Cylinder elevated by Electric-Hydraulic Pump. Boom Length is 6 Ft. to 10 Ft. manualy extended Shipping Weight: 610 Lbs. $ 4, EL-14 ( ) Max Capacity 2000Lbs at 4 Ft. Manual Rotation Power up Gravity down boom elevation Boom Cylinder elevated by Electric-Hydraulic Pump. Boom Length is 6 Ft. to 14 Ft. in two stages, manually extended. Shipping Weight: 645 Lbs. $ 5, AR-10 ( ) Max Capacity 2700 Lbs. at 3 Ft. Unlimited Power Rotation is standard Power Boom Up and Down Boom standard. Cylinder equiped with load holding Counterbalance Valve. Boom Length is 6 Ft. to 10 Ft. manualy extended New Feature - ANTI-TWO Block is now standard. Shipping Weight: 660 Lbs. $ 7, V D. C. ELECTRIC CRANE

7 AR-14 ( 39043) Max Capacity 2700 Lbs. at 3 Ft. Unlimited Power Rotation is standard Power up / Down Boom with Counterbalance Valve. New Feature - ANTI-TWO Block is now standard. Shipping Weight: 700 Lbs. $ 7, REL & 3200REE 10,000 Ft.-Lb. Moment Rating. Capacity 3200 Lbs. at 3 Ft. 12 V. D. C. Planetary Gear Winch. All Powered Functions are 12 V. D. C. Includes 62 Ft. of 1/4 In. Galvanized Aircraft Cable, Traveling Block. Pendant control is 18 Ft. long. Load sensor and ATB is now standard on All 3200 Series Cranes Meets requirements of 29 CFR , ANSI B30.5, SAE J REL-11 ( ) Power Rotation and Power Boom Elevation. Boom Length 7 Ft. to 11 Ft. Shipping Weight: 720 Lbs. $ 7, REL-15 ( ) Power Rotation and Power Boom Elevation. Boom Length 7 Ft. to 15 Ft. in two stages. Shipping Weight: 755 Lbs. $ 7, REE-11 ( ) Power Rotation and Power Boom Elevation and Power Boom Extension from 7 Ft. to 11 Ft. Shipping Weight: 780 Lbs. $ 9, REE-15 ( ) Power Rotation and Power Boom Elevation and Power Boom Extension from 7 Ft. to 11 Ft. with Manual Extension from 11 Ft. to 15 Ft. Shipping Weight: 830 Lbs. $ 9, Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE ,000 Ft.-Lb. Moment Rating. Capacity 3600 Lbs. at 3 Ft. 3 in. All Powered Functions are 12 V. D. C. efficient Planetary Gear Winch Includes 62 Ft. of 1/4 In. Galvanized Aircraft Cable Traveling Block

8 18 Ft. long Pendant Control. Load Limiting Sensor. Anti Two-Block is standard. 25 Ft. of Battery Power Cable. 3 Ft. Battery Ground Wire. 150 Amp Circuit Breaker. Master Disconnect Switch X-16 ( ) Power Rotation and Power Boom Elevation and Power Boom Extension from 8 Ft. to 12 Ft. with Manual Meets requirements of 29 CFR , ANSI B30.5, SAE J REE-15 ( ) Power Rotation and Power Boom Elevation Power Extension from 7 Ft. to 11 Ft. with Manual Extension from 11 Ft. to 15 Ft. Shipping Weight: 825 Lbs X 9-15 ( 39???) Power Rotation and Power Boom Elevation, Power Extension from 9 Ft.to 15 Ft. Shipping Weight $ 9, $ 9, Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE 4000X 16,000 Ft.-Lb. Moment Rating. Capacity 4000 Lbs. at 4 Ft. 12 V. D. C. Planetary Gear Winch. All powered functions are 12 V. D. C. 85 Ft. of 1/4 In. Galvanized Aircraft Cable. Traveling Block. 25 Ft. long Pendant Control. 25 Ft. of Battery Power Cable. 3 Ft. Battery Ground Wire. 150 Amp Circuit Breaker. Master Disconnect Switch. Load Limiting Sensor. Anti Two-Block is included. Meets requirements of 29 CFR , ANSI B30.5, SAE J1063

9 Extension from 12 Ft. to 16 Ft. Shipping Weight: 960 Lbs X-20 ( ) Same as 4000X-16 except boom extends 10 to 16 Ft. hydraulically with a 4 Ft. Manual Extension to 20 Ft. Shipping Weight: 995 Lbs. $ 11, $ 11, Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE 5000WX 25,000 Ft.-Lb. Moment Rating. Capacity 5000 Lbs. at 5 Ft. Load Radius. 12 V. D. C. Planetary Gear Drive Electric Winch. Continuous, Unlimited Power Rotation. Power Boom Elevation. Pendant Control 25 Ft. long. 25 Ft. of Battery Power Cable and 3 Ft. of Battery Ground Wire. 150 Amp Circuit Breaker and Master Disconnect included. Includes 80 Ft. of 5/16" Galvanized Aircraft Cable. Traveling Block with Roller Bearing Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Crane meets OSHA 29 CFR and ANSI B30.5. Tested with Strain Gages as required by SAE J WX-16 ( ) Power Telescoping Boom from 10 Ft. to 16 Ft. Shipping Weight: 1510 Lbs WX-20 ( ) Power Telescoping Boom from 10 Ft. to 16 Ft. with Manually Extendable Section from 16 Ft. to 20 Ft. Shipping Weight: 1545 Lbs. $ 14, $ 14,633.00

10 Accessories (Outriggers, etc.) are listed at end of this price list. 12V D. C. ELECTRIC CRANE 6036WX & 6036DX 36,000 Ft.-Lb. Moment Rating. Capacity 6,000 Lbs. at 6 Ft. Load Radius. Includes Continuous and Unlimited Power Rotation, Power Extension 10 to 16 Ft. Load Sensor and Anti Two-Block included. Remote Pendant Control 25 Ft. long. Meets requirements of 29 CFR , ANSI B30.5, SAE J1063 Efficient Planetary Gear driven Winch with Series Motor WX-16 ( ) With 10 Ft. to 16 Ft. Power Telescoping Boom. Shipping Weight: 1650 Lbs. $ 15, WX-20 ( ) Powered Extension from 10 Ft. 4 In. to 16 Ft. 4 In. Manual Pullout Section of 3 Ft. 8 In. for total Extension of 20 Ft. Shipping Weight: 1710 Lbs. $ 15, DX DX-22 ( ) Powered Boom Extension from 11 to 22 Ft. Shipping Weight : 2025 Lbs. $ 16, Accessories (Outriggers, etc.) are listed at end of this price list.

11 HYDRAULIC CRANE 1032X & XP 10,000 Ft.-Lbs. Moment Rating Lbs. Maximum Lifting Capacity at 3 Ft. Load Radius. 62 Ft. of 1/4 In. Galvanized Aircraft Cable. Removeable Remote Pendant Control 18 Ft. long. Rotation limited to 365 Degrees. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2500 PSI. Anti Two-Block is standard feature. Load Sensor is standard feature. Meets requirements of 29 CFR , ANSI B30.5, SAE J X-11 ( ) Power Hoist, Power Boom Elevation, Power Rotation Power Boom Extension. Boom Length telescopes under power from 7 Ft. to 11 Ft. Shipping Weight: 880 Lbs X-15 ( ) Power Hoist, Power Boom Elevation, Power Rotation Power Boom Extension. Boom Length telescopes under power from 7 Ft. to 11 Ft. and Manually from 11 Ft. to 15 Ft. Shipping Weight: 910 Lbs. $ 10, $ 10, PROPORTIONAL HYDRAULIC CONTROL XP-15 ( ) Same crane as 1032X-15 except with Proportional Hydraulic Controls. Shipping Weight: 910 Lbs. $ 11, Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 16,000 Ft.-Lbs. Moment Rating. 1640X & XP

12 4000 Lbs. Maximum Lifting Capacity at 4 Ft. Load Radius. 70 Ft. of 1/4 In. Galvanized Aircraft Cable. Removeable Remote Pendant Control 20 Ft. long. Rotation limited to 365 Degrees. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2500 PSI. Battery Wire, Fuse and Electrical Cut Off Switch included. Anti Two-Block included. Load Sensor is included. Meets requirements of 29 CFR , ANSI B30.5, SAE J X-16 ( ) Power Hoist, Power Boom Elevation, Power Rotation Power Boom Extension. Boom Length telescopes under power from 8 Ft. to 12 Ft. and Manually from 12 Ft. to 16 Ft. Shipping Weight: 1000 Lbs X-20 ( ) Same as 1640X-16 except boom extends 10 to 16 Ft. hydraulically with a 4 Ft. Manual Extension to 20 Ft. Shipping Weight: 1070 Lbs. $ 12, $ 12, PROPORTIONAL HYDRAULIC CONTROL XP-16 ( ) Same crane as 1640X-16 except with Proportional Hydraulic Controls. Shipping Weight: 1015 Lbs XP-20 ( ) Same as 1640XP-16 except boom extends 10 to 16 Ft. hydraulically with a 4 Ft. Manual Extension to 20 Ft. Shipping Weight: 1070 Lbs. $ 13, $ 13, Accessories (Outriggers, etc.) are listed at the end of this price list. HYDRAULIC CRANE 2550X & XP 25,000 Ft.-Lb. Moment Rating. Capacity 5000 Lbs. at 5 Ft. Load Radius Hydraulically powered Rotation, Winch, Boom Elevation. Continuous, Unlimited Rotation. Removeable Pendant Control 25 Ft. Long. Includes 80 Ft. of 5/16" Galvanized Aircraft Cable. Traveling Block with Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2750 PSI.

13 Meets requirements of 29 CFR , ANSI B30.5, SAE J X-16 (39029) Power Boom Elevation, Power Rotation and Power Boom Extension from 10 Ft. to 16 Ft. Shipping Weight: 1430 Lbs X-20 ( ) Power boom Elevation, Power Rotation and Power Boom Extension from 10 Ft. to 16 Ft. 4 Ft. Manual Boom Extension from 16 Ft. to 20 Ft. Shipping Weight: 1540 Lbs. PROPORTIONAL HYDRAULIC CONTROL XP-16 ( ) Same as 2550X-16 except that Proportional Hydraulic Control is added. Shipping Weight: 1435 Lbs XP-20 ( ) Same as 2550X-20 except that Proportional Hydraulic Control is added. Shipping Weight: 1545 Lbs. $ 13, $ 13, $ 14, $ 14, Accessories (Outriggers, etc.) are listed at the end of this price list. HYDRAULIC CRANE 3660X & XP 36,000 Ft.-Lb. Moment Rating. Capacity 6000 Lbs. at 6 Ft. Load Radius Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension. Continuous, Unlimited Rotation. Removeable Pendant Control is 25 Ft. long. Includes 95 Ft. of 3/8" Galvanized Aircraft Cable. Includes Traveling Block with Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2750 PSI. Meets requirements of 29 CFR , ANSI B30.5, SAE J X-16 ( ) Boom Length 10 Ft. to 16 Ft. Shipping Weight: 1690 Lbs. $ 14, X-20 ( 39021) Power Boom from 10 Ft. to 16 Ft. with Manual

14 Extension from 16 Ft. to 20 Ft. Shipping Weight: 1750 Lbs. $ 14, PROPORTIONAL HYDRAULIC CONTROL XP-16 ( ) Same as 3660X-16 except Proportional Control Hydraulic System is added. Shipping Weight: 1695 Lbs XP-20 ( ) Same as 3660X-20 except Proportional Control Hydraulic System is added. Shipping Weight: 1755 Lbs. $ 15, $ 15, Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 4064XP 40,000 Ft.-Lb. Moment Rating. Capacity 6400 Lbs. at 6.2 Ft. Load Radius Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension from 10 to 22Ft. Continuous, Unlimited Rotation. High Speed Planetary Gear Winch External Rotation Gear with Bronze Alloy Worm Gearbox Wireless or Removeable Wired Pendant Control. Includes 95 Ft. of 3/8" Galvanized Aircraft Cable. Includes Traveling Block with Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 8 GPM at 2750 PSI. Meets requirements of 29 CFR , ANSI B30.5 and SAE J XP-22 ( ) Standard Removeable Pendant Control. Shipping Weight: 2065 Lbs XP-22 ( ) Wireless Remote Control with CAN Wire Shipping Weight: 2065 Lbs. $ 17, $ 18, Accessories (Outriggers, etc.) are listed at end of this price list.

15 HYDRAULIC CRANE 5080X & XP 50,000 Ft.-Lb. Moment Rating. Capacity 8000 Lbs. at 6 Ft. Load Radius. Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension. Continuous, Unlimited Rotation unless additional electrical controls are added to the Pendant. Removeable Pendant Control is 25 Ft. Long. Includes 95 Ft. of 3/8" Galvanized Aircraft Cable. Includes Traveling Block with Swivel Safety Hook. Anti Two-Block included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2750 PSI. Meets requirements of 29 CFR , ANSI B30.5 and SAE J X-20 ( ) Power Boom from 10 Ft. to 16 Ft. with Manual Extension from 16 Ft. to 20 Ft. Shipping Weight: 2000 Lbs. $ 17, PROPORTIONAL HYDRAULIC CONTROL XP-20 ( ) Power Boom from 10 Ft. to 16 Ft. with Manual Extension from 16 Ft. to 20 Ft. Proportional Flow Control for Powered Functions. Shipping Weight: 2005 Lbs. $ 18, Accessories (Outriggers, etc.) are listed at end of this price list.

16 HYDRAULIC CRANE 60100XP 60,000 Ft.-Lb. Moment Rating. Capacity 10,000 Lbs. at 6 Ft. Load Radius. Proportional Hydraulic Control. Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension. Continuous, Unlimited Rotation FM Radio Remote Control. Includes 100 Ft. of 7/16" Galvanized Aircraft Cable. Includes Traveling Block with Ball Bearing Swivel Safety Hook. Anti Two-Block included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 8 GPM at 2750 PSI. Meets requirements of 29 CFR , ANSI B30.5, SAE J1063 NOTE: Wireless Control is standard equipment on this model XP-24 ( ) Includes Power Boom extension from 12 Ft. to 24 Ft. Shipping Weight: 2810 $ 21, Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 72100XP 72,000 Ft.-Lb. Moment Rating. Capacity 10,000 Lbs. at 7.2 Ft. Load Radius. Proportional Hydraulic Control. Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension.

17 Continuous, Unlimited Rotation FM Radio Remote Control. Includes 100 Ft. of 7/16" Galvanized Aircraft Cable. Includes Traveling Block with Ball Bearing Swivel Safety Hook. Anti Two-Block included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 8 GPM at 2750 PSI. Meets requirements of 29 CFR , ANSI B30.5, SAE J1063 NOTE: Wireless Control is standard equipment on this model XP-21 ( ) Power Boom from 11 Ft. to 17 Ft. with Manual Extension from 17 Ft. to 21 Ft. Weight: 2770 Lbs XP-24 ( ) Includes Power Boom extension from 11 Ft. to 24 Ft. Weight: 2870 Lbs. $ 24, $ 26, Accessories (Outriggers, etc.) are listed at end of this price list. ACCESSORIES NOTE: 10K, 18K, 25K, 36K, 50K & 72K refer to the crane moment rating in 1000 Ft.-Lbs. JACKSTANDS K Ft.-Lbs. Over-Center Type (13 Lbs.). $ K Ft.-Lbs. Over-Center Type (Left Side) $ K Ft.-Lbs. Over-Center Type - Advise Height $ K Ft.-Lbs. Drop Down Square Tube, Permanent Mount with Screw Base (36 Lbs.). $ K Ft.-Lbs. Over-Center Type (27 Lbs.) $ K Ft.-Lbs Over-Center Type (Left Side) $ K Ft.-Lbs. Over-Center Type - Advise Height $

18 MANUAL OUTRIGGERS Manual outriggers include a crank down jack and detents at both the extended and retracted positions K Ft.-Lbs. Outrigger, Jack on one side only $ K Ft.-Lbs. Outrigger, For 79" Body Width $ K Ft.-Lbs. Outrigger, For 89" Body Width $ K Ft.-Lbs. Outrigger, For 94" Body Width $ K Ft-Lbs. Outrigger, Street side Fixed, Jack's both sides $ 1, K Ft-Lbs. Outrigger, For 95" Body Width $ 1, K Ft.-Lbs. Outrigger, For 90" Wide Truck Bed $ 1, K Ft.-Lbs. Outrigger, For 95" Wide Truck Bed $ 1, K Ft.-Lbs. Outrigger $ 1, K Ft.-Lbs. Outrigger $ 1, Ft-Lbs. Outrigger, Street side Fixed, Jack's both sides $ 1, ACCESSORIES OUTRIGGERS, HYDRAULIC - Both Sides Extend Hydraulic outriggers are offered with either manual pull out or power extension. The outrigger package includes: Diverter Valve for selecting either outrigger or crane operation, Lever control valve for directional control of the outrigger, Hose and fittings for cylinders and lever control valve K Ft.-Lbs. Manual Out, Hydraulic Down $ 3, K Ft.-Lbs. Hydraulic Out, Hydraulic Down $ 4, K Ft.-Lbs. Manual Out, Hydraulic Down $ 3, K Ft.-Lbs.Hydraulic Out, Hydraulic Down $ 5, K Ft.-Lbs. Manual Out, Hydraulic Down $ 4, K Ft.-Lbs. Hydraulic Out, Hydraulic Down $ 5, K Ft.-Lbs. Manual Out, Hydraulic Down $ 4, K Ft.-Lbs. Hydraulic Out, Hydraulic Down $ 5, OUTRIGGERS, HYDRAULIC - Curb Pullout, Street Fixed K Ft.-Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 4, K Ft.-Lbs. Curb Manual Out, Hydraulic Down Both Sides $ 3, K Ft.-Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 4,833.00

19 K Ft -Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 5, OUTRIGGERS, HYDRAULIC (For Electric Cranes) Hydraulic outriggers for electric cranes are offered with either manual or power extension. The outrigger package includes: Electric Hydraulic Pump with starter solenoid and control switch K Manual Out, Hydraulic Down $ 4, K Hydraulic Out, Hydraulic Down $ 5, K Manual Out, Hydraulic Down $ 4, K Hydraulic Out and Hydraulic Down $ 5, ACCESSORIES BOOM RESTS Required for all power rotation cranes. Boom Rests are designed to hold the boom in a nearly horizontal position. A loop is included for attaching the hook. The wire line can be tightened to hold the boom securely during travel Boom Rest for 206REL. $ Boom Rest for 206RELS. $ Boom Rest for 2000 $ Boom Rest for Model 208, 2700, 3200, 4000 & 1640 $ Boom Rest for Model 3612 $ Boom Rest, for use with Pedestal. For Model 208, 2700, 3200, 4000 & 1640 ( Non-Adjustable) $ Boom Rest for Model 5000, 2550, 6036 or 3660 $ Boom Rest, for use with Pedestal for Model 5000, 2550, 6036 or (Non-Adjustable) $ Boom Rest for 4064 $ Boom Rest for Model $ Boom Rest, for use with Pedestal for Model 5080 (Non-Adjustable) $ Boom Rest for Model & $ 84.00

20 ACCESSORIES PEDESTALS Pedestals are fabricated to match the mounting requirements of the crane. Heights up to 36 inches can be supplied at the below prices. For taller pedestals contact Liftmoore. Advise height when ordering K for Flat Bed Mounting $ K for Flat Bed Mounting $ K & 36K for Flat Bed Mounting $ K for Flat Bed Mounting $ K for Flat Bed Mounting $ & 72K for Flat Bed Mounting $ MOUNTING PLATES Mounting plates are for welding onto the truck body. They are fabricated to fit under the crane matching the bolt pattern and cutouts needed " x 12" x 12" drilled for L-Series. $ " x 15" x 15" for 208, 2000A, 2700, 3200 & $ " x 15" x 15" for 4000 & 1640 $ " x 16.75" x 16.75" for 5000, 2550, 6036 & 3660 $ "x 17.75" x 17.75" for 4064 $ " x 16.75" x 16.75" for $ $ " x 21" x 21" for & $ ACCESSORIES

21 WIRELESS CONTROL SYSTEM for HYDRAULIC CRANES WITH PROPORTIONAL CONTROLS 2.60 Add wireless control system to proportional control cranes at time of order ( replaces standard pendant control ) $ OPTIONAL RADIO EQUIPMENT: Engine Controls: 2.61 Receiver and wire harness for Engine Controls. Note: Does not include any relays needed for the system. The crane still has continuous, unlitmited rotation. $ For other options and special applications contact Liftmoore. WIRELESS CONTROL SYSTEM FOR ELECTRIC & HYDRAULIC CRANES WITH ON/OFF CONTROLS The Mega FM Wireless system maintains the use of the standard pendant 2.62 Mega FM Wireless Radio System added to Crane at time of order, Includes standard control pendant. $ Gallon Hydraulic Reservoir with Filter, Strainer, $ and Diffuser. No Hose or Fittings. (40 Lbs.). Hydraulics Systems and Installation of Cranes Hot Shift PTO Standard PTO Hydraulic System with hot shift PTO, Reservoir, filter, Fitting, Hydraulic Oil, etc $ 2, Hydraulic System with hot shift PTO, Reservoir, filter, Fitting, Hydraulic Oil, etc $ 2, Installtion or hydraulic Sytems $ Flat Rate Hourly Labor Flat Rate $ Crane Installation Charges 4.01 L-Series Models In Pick-up Box Applications $

22 4.02 Liftmoore Electric Models Models $ Jack stands $ Manual out/down outriggers $ Electric/hydraulic outriggers $ Liftmoore Hydraulic Crane Models (does not include Hydraulics) $ Jack stands $ Manual out/down outriggers $ Electric/hydraulic outriggers $ Cost per mile for pick-up or Delivery to or from Moorhead, MN $ 2.00 (Maximum charge per unit for pick-up/delivery one way $ ) Buyer sguide for pricing, Make and Model of Chassis: Base Crane Jackstand/outrigger Boom Rest Additional Options: Installation Charges Delivery Body and Equipment By: Bert s Truck Equipment Inc. Jim McLaughlin, Commercial Fleet Sales 3804 Hwy 75 North Moorhead, MN , Fax jimmc@bertsonline.com Web Site:

Date & Price List I.D. Number June 23rd, 2014

Date & Price List I.D. Number June 23rd, 2014 07/2014 VERSION 4 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Jim McLaughlin 3804 Hwy

More information

Date & Price List I.D. Number Form 1957 September 15, Price per loaded mile $2.95

Date & Price List I.D. Number Form 1957 September 15, Price per loaded mile $2.95 04/2013 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Crysteel Truck Equipment Contact Person: Bob Brandenburg Street Address: 1130-73rd Avenue NE P.O. Box: City, State, Zip Fridley, MN 55432 Phone #:

More information

Liftmoore Electric & Hydraulic Cranes. One Year from in service date. Date & I.D. of Price List

Liftmoore Electric & Hydraulic Cranes. One Year from in service date. Date & I.D. of Price List #250-109 STATE OF MINNESOTA PRICING PAGE ADDENDUM 3 5-11-2011 Vendor Name:, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336

More information

Manufacture. Discount to be applied to Price List 0% Installation of service crane -complete install cost $426.30

Manufacture. Discount to be applied to Price List 0% Installation of service crane -complete install cost $426.30 Vendor Name: Crysteel Truck Equipment Contact Person: Bob Brandenburg Street Address: 1130 73rd Ave. NE P.O. Box: City, State, Zip 55432 Phone #: 763-571-1902 Toll Free #: 800-795-1280 Fax #: 763-571-5091

More information

LIFTMOORE TRUCK MOUNTED CRANES

LIFTMOORE TRUCK MOUNTED CRANES LIFTMOORE TRUCK MOUNTED CRANES Building Quality Since 1961 ESTABLISHED 1961 7810 Pinemont Dr. Houston, Texas 77040 713-688-5533 FAX: 713-688-6324 www.liftmoore.com Craftsmanship Dependability Quality LIFTMOORE

More information

AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number

AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number Vendor Name: Crysteel Truck Equipment Contact Person: Bob Brandenburg Street Address: 1130-73rd Avenue NE P.O. Box: City, State, Zip Fridley, MN 55432 Phone #: cell # (612) 240-8422 or store # (763) 571-1902

More information

Hydraulics & Controls

Hydraulics & Controls Hydraulics & Controls Contract end Date 10-31-17 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc

More information

Hydraulics & Controls

Hydraulics & Controls Hydraulics & Controls Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc

More information

Commercial Grade Truck Equipment

Commercial Grade Truck Equipment CRANES & CRANE OPTIONS Commercial Grade Truck Equipment R H6400 Every crane we build is guaranteed for life. Field service RKI, formerly known as Rawson-Koenig, designs Pipeline companies and manufactures

More information

CRANES & CRANE OPTIONS. Commercial Grade Truck Equipment

CRANES & CRANE OPTIONS. Commercial Grade Truck Equipment CRANES & CRANE OPTIONS Commercial Grade Truck Equipment R Every crane we build is guaranteed for life. Field service RKI designs and Pipeline companies manufactures premiumquality cranes that are used

More information

Commercial Grade Truck Equipment

Commercial Grade Truck Equipment CRANES & CRANE OPTIONS Commercial Grade Truck Equipment R H6400 Every crane we build is guaranteed for life. Field service RKI, formerly known as Rawson-Koenig, designs Pipeline companies and manufactures

More information

Date & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0%

Date & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0% #250-109 STATE OF MINNESOTA PRICING PAGE Page 1 of 1 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead,

More information

STATE OF MINNESOTA PRICING PAGE

STATE OF MINNESOTA PRICING PAGE STATE OF MINNESOTA PRICING PAGE Page 1 of 8 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336

More information

series WL product guide features

series WL product guide features series WL BOOM TRUCKS features 4-Section 124 (37,8 m) or 102 (31,1 m) Proportional boom 135 (41,2 m) Maximum main boom tip height Custom boom point adapter for auxiliary hoist operations 22 4 (6,8 m) A-frame

More information

series 3001 product guide features B O O M T R U C K S

series 3001 product guide features B O O M T R U C K S series 3001 B O O M T R U C K S features 30 Ton (27,3 mton) Capacity 4-Section 102' (31 m) Proportional Boom 3-Section 71' (21,6 m) Proportional Boom 2-Section, 26' (7,9 m) to 46' (14 m) Jib 112' (34,1

More information

TRAILER OR SKID MOUNT AIR COMPRESSOR

TRAILER OR SKID MOUNT AIR COMPRESSOR 1 of 18 Price quote for: TRAILER OR SKID MOUNT AIR COMPRESSOR Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: ABM Equipment & Supply,

More information

Date & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0%

Date & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0% #250-109 STATE OF MINNESOTA PRICING PAGE Page 1 of 1 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead,

More information

CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7

More information

series 2801 product guide features B O O M T R U C K S 28 Ton (24,4 mton) Capacity 4-Section 92' (28 m) Proportional Boom

series 2801 product guide features B O O M T R U C K S 28 Ton (24,4 mton) Capacity 4-Section 92' (28 m) Proportional Boom series 2801 B O O M T R U C K S features 28 Ton (24,4 mton) Capacity 4-Section 92' (28 m) Proportional Boom 149' 1" (45,4 m) Maximum Tip Height 103' (31,4 m) Maximum Main Boom Tip Height 2-Section 26'

More information

STATE OF MINNESOTA PRICING PAGE

STATE OF MINNESOTA PRICING PAGE STATE OF MINNESOTA PRICING PAGE Page 1 of 1 PLEASE PURCHABert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336

More information

GIUFFRE.COM. SkyCrane. SC series. product guide. features GIUFFRE BROS CRANES INC. Aerial Lifts and Cranes

GIUFFRE.COM. SkyCrane. SC series. product guide. features GIUFFRE BROS CRANES INC. Aerial Lifts and Cranes features Working Heights to 97' Dual purpose machine; aerial platform and crane Multiple tool and lamp box options Extra long lamp box option in sub-frame Easy ground level entry to Aerial platform Aerial

More information

3200LRX-15-EH Crane Rating: 12,000 ft. lbs. Maximum lifting capacity: 3,200 lbs. Boom Length: 15

3200LRX-15-EH Crane Rating: 12,000 ft. lbs. Maximum lifting capacity: 3,200 lbs. Boom Length: 15 3 2 0 0 s e r i e s c r a n e 3200LRX-15-EH Crane Rating: 12,000 ft. lbs. Maximum lifting capacity: 3,200 lbs. Boom Length: 15 1 5 - F o o t t o t a l r e a c h Hydraulic extension boom provides 11-ft.

More information

Price per loaded mile for delivery $ 2.25 Delivery Time Frame in calendar days ARO

Price per loaded mile for delivery $ 2.25 Delivery Time Frame in calendar days ARO Flatbeds Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin

More information

Courtesy of Crane.Market

Courtesy of Crane.Market CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 17,468 lb Engine Make & Model

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 17,468 lb Engine Make & Model Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Titan Machinery Inc. Andy Bethel 6340 County Road 101 E Shakopee, MN 55379 952-445-0365

More information

PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE

PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7

More information

series 2202 B O O M T R U C K S

series 2202 B O O M T R U C K S features 22 Ton (20 mton) Capacity 4-Section 101 (30,8 m) Proportional Boom 3-Section 77 (23,5m) Proportional Boom 29 (8,8 m) Fixed Jib 29 (8,8 m) to 52 (15,9) Telescopic Jib 139 10 (42,6 m) Maximum Tip

More information

PSC 8629 HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.

PSC 8629 HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package. PSC 8629 HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and durability.

More information

TRACTOR: LOADER-BACKHOE

TRACTOR: LOADER-BACKHOE Price quote for: TRACTOR: LOADER-BACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company Jesse Miller 12500 Dupont

More information

series 2802 product guide features BOOM TRUCKS

series 2802 product guide features BOOM TRUCKS series 2802 BOOM TRUCKS features 28 Ton (24,4 mton) Capacity 4-Section 102' (31,0 m) Proportional Boom 4-Section 92' (28.0 m) Proportional Boom 2-Section 26' (7,9 m) to 46' (14,0 m) Telescopic Jib 157'

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach 207'/63,1 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 40,300 lbs/18 280 kg Jib

More information

TRAILER OR SKID MOUNT AIR COMPRESSOR

TRAILER OR SKID MOUNT AIR COMPRESSOR August 2017 Price quote for: (Typed Resonses Required) TRAILER OR SKID MOUNT AIR COMPRESSOR 1 of 33 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #:

More information

series SX B O O M T R U C K S

series SX B O O M T R U C K S features Max 30 ton (27,2 mton) Capacity series SX B O O M T R U C K S 5-Section 124 (37,8 m) Proportional Boom 1-Piece 31 (9,5m) Jib 4-Section 102 (31,1 m) Proportional Boom 2-Section 26 (7,9 m) to 46

More information

CONTENTS TM200 TELESCOPIC CRANE

CONTENTS TM200 TELESCOPIC CRANE TM200 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Chart: Main Boom & Jib...6 LMI Codes...7 Reeving

More information

Version of Excel used: Spec # Information Requested Answer

Version of Excel used: Spec # Information Requested Answer PLEASE PURCHAS Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Seth Strehler 1600 Highway 55 East Buffalo, Mn 55313 763-682-2200 763-682-6141

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 50,900 lbs Engine Make & Model Caterpillar C7.1 Tier (Interim 4 or Final)?

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 50,900 lbs Engine Make & Model Caterpillar C7.1 Tier (Interim 4 or Final)? Vendor Name: Ziegler Inc. Contact Person: Chris Rice, Richard Alness Street Address: 901 W. 94th St. P.O. Box: City, State, Zip Minneapolis, MN 55420 Phone #: (952) 888-4121 Toll Free #: (800) 352-2812

More information

S STATE OF MINNESOTA PRICE PAGES S-843(5)

S STATE OF MINNESOTA PRICE PAGES S-843(5) Vendor Name: MacQueen Equipment, Inc. Contact Person: Dan Gage Street Address: 595 Aldine Street P.O. Box: City, State, Zip St. Paul, MN 55104 Phone #: 651.645.5726 Toll Free #: 800.832.6417 Fax #: 651.645.6668

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 80,500 lbs Engine Make & Model Caterpillar C9.3 Tier (Interim 4 or Final)?

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 80,500 lbs Engine Make & Model Caterpillar C9.3 Tier (Interim 4 or Final)? Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Ziegler Inc. Chris Rice, Richard Alness 901 W. 94th St. Minneapolis, MN 55420

More information

600H Product Guide. Features. ASME B30.5 Imperial 85% Standard RCL System. 18,1 t (20 USt) rating

600H Product Guide. Features. ASME B30.5 Imperial 85% Standard RCL System. 18,1 t (20 USt) rating 6H Product Guide ASME B3.5 Imperial 85% Features 18,1 t (2 USt) rating Five boom options available from 15 m (49 ft) to 27,42 m (9 ft) Multiple outrigger positions Standard RCL System Internal anti-two

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 64,554 lbs Engine Make & Model Caterpillar C7.1 Tier (Interim 4 or Final)?

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 64,554 lbs Engine Make & Model Caterpillar C7.1 Tier (Interim 4 or Final)? Vendor Name: Ziegler Inc. Contact Person: Chris Rice, Richard Alness Street Address: 901 W. 94th St. P.O. Box: City, State, Zip Minneapolis, MN 55420 Phone #: (952) 888-4121 Toll Free #: (800) 352-2812

More information

Crane Installed on Cab & Chassis

Crane Installed on Cab & Chassis Price quote for: Crane Installed on Cab & Chassis Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Aspen Equipment Company Mark Lundeen

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri- State Bobcat Patrick

More information

series 5002 B O O M T R U C K S

series 5002 B O O M T R U C K S series 5002 B O O M T R U C K S features 50 Ton (45,4 Mton) Capacity 4-Section 110 (33,5 M) Proportional 4-Section 96 (29,3 M) Proportional 2-Section 32 (9,8 M) To 49 (14,9 M) Telescopic Offset Jib (15,

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height

50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height 50105R 50105R SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 164'/50 m 360 Degrees 100,000 lbs/45,359 kg 105

More information

Crane Installed on Cab & Chassis

Crane Installed on Cab & Chassis Price quote for: Crane Installed on Cab & Chassis Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Aspen Equipment Company Mark Lundeen

More information

26105F TECHNICAL SPECIFICATIONS 26105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

26105F TECHNICAL SPECIFICATIONS 26105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 26105F 26105F SIDE VIEW DIAGRAM Maximum Vertical Reach 162'/49,4 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 52,000 lbs/23 587 kg Boom Length 105 /32 m Crane Weight (Dry) 26,040

More information

MODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines)

MODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines) DATE February, 2010 MODEL : TM-1882 CRANE SPECIFICATIONS MAXIMUM LIFTING CAPACITY 17,000kg@1.5m(6-part lines) BOOM WINCH SWING 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal

More information

series 5002 B O O M T R U C K S

series 5002 B O O M T R U C K S series 5002 B O O M T R U C K S features 50 Ton (45,4 mton) Capacity 4-Section 110 (33,5 m) Proportional 4-Section 96 (29,3 m) Proportional 2-Section 32 (9,8 m) To 49 (14,9 m) Telescopic Offset Jib (15,

More information

MINNESOTA PRICING PAGES (Typed Responses Required) (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City

MINNESOTA PRICING PAGES (Typed Responses Required) (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City SEQ. #46-25 MINNESOTA PRICING PAGES (Typed Responses Required) December 205 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State,

More information

Furnish separate price quote for: EXCAVATOR. 1.1 Make & Model Case CX300C Operating Weight. Price $

Furnish separate price quote for: EXCAVATOR. 1.1 Make & Model Case CX300C Operating Weight. Price $ Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Titan Machinery Inc. Andy Bethel 6340 County Road 101 E Shakopee, MN 55379 952-445-0365

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 45127 45127 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 192'/58,5 m 360 Degrees 90,000 lbs/40 823 kg 127

More information

CONTENTS CM300.1 SERIES TELESCOPIC CRANE

CONTENTS CM300.1 SERIES TELESCOPIC CRANE CM300.1 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features... 4 3051T Chassis... 5 30100C Chassis... 6 Outrigger Extension...

More information

Furnish separate price quote for: EXCAVATOR

Furnish separate price quote for: EXCAVATOR Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Lano Equipment - Anoka Scott Fahey 6140 Hwy 10 NW Anoka, MN 55303 763-323-1720

More information

COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAME

COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAME RESPONDER'S NAME: Karen Montour SWIFT EVENT NUMBER: G0210-2000004717 Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will provide the required

More information

UPTime is the Manitex commitment to complete support of thousands of units working every day.

UPTime is the Manitex commitment to complete support of thousands of units working every day. UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX CM50 1 PC-EN-V1-1113

More information

View thousands of Crane Specifications on FreeCraneSpecs.com

View thousands of Crane Specifications on FreeCraneSpecs.com 40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 201'/61.3 m 360 Degrees 80,000 lbs/36,287 kg 142

More information

1560F TECHNICAL SPECIFICATIONS 1560F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 3 Overall Height

1560F TECHNICAL SPECIFICATIONS 1560F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 3 Overall Height 1560F 1560F SIDE VIEW DIAGRAM Maximum Vertical Reach 90'/27,4 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 30,000 lbs/13 608 kg Boom Length 60 /18,3 m Crane Weight (Dry) 14,825 lbs/6725

More information

series 2201 product guide features B O O M T R U C K S 22 Ton (19,9 mton) Capacity 4-Section 81' (24,7 m) Proportional Boom

series 2201 product guide features B O O M T R U C K S 22 Ton (19,9 mton) Capacity 4-Section 81' (24,7 m) Proportional Boom series 2201 B O O M T R U C K S features 22 Ton (19,9 mton) Capacity 4Section 81' (24,7 m) 3Section 77' (23,5 m) 3Section 62' (18,9 m) 3Section 50' (15,2 m) 92'6" (28,2 m) Maximum Main Boom Height 133'2"

More information

30105F TECHNICAL SPECIFICATIONS 30105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

30105F TECHNICAL SPECIFICATIONS 30105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 30105F 30105F SIDE VIEW DIAGRAM 6 Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard) 28,160

More information

Aftermarket Tractor/Skidsteer Attachments

Aftermarket Tractor/Skidsteer Attachments SEQ. #416-713 MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells JULY, 2013 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free

More information

2 80 GPM Swing speed, RPM 10.6 Boom length, ft-in 17' Arm length, ft-in. 13,228 lb-ft. Max dig depth, ft-in

2 80 GPM Swing speed, RPM 10.6 Boom length, ft-in 17' Arm length, ft-in. 13,228 lb-ft. Max dig depth, ft-in Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: 866-210-4402 matt.gansser@doosan.com www.doosanequipment.com Clark Equipment

More information

ELECTRIC / HYDRAULIC SERVICE CRANE PSC Superior Lifting System

ELECTRIC / HYDRAULIC SERVICE CRANE PSC Superior Lifting System ELECTRIC / HYDRAULIC SERVICE CRANE PSC 5025 Superior Lifting System SERVICE CRANE FEATURES Meeting or exceeding all ASME and OSHA standards, PSC 5025 an Electric/Hydraulic, or Full Hydraulic Service Crane

More information

HERCULES SIGN POST DIGGER DERRICK

HERCULES SIGN POST DIGGER DERRICK Introduction UTV International has manufactured a line of tracked carriers since 1992. In 1996, we integrated our first digger derrick onto a tracked carrier. Since then we have been engaged in a continual

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

PSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.

PSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package. PSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

STATE OF MINNESOTA PRICING PAGE. Dump Bodies. Version of Excel used: 2013

STATE OF MINNESOTA PRICING PAGE. Dump Bodies. Version of Excel used: 2013 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin 3804 Hwy 75 North 336 Moorhead, MN

More information

KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.

KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics. KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning

More information

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) SEQ # 727-417 Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) April, 2017 quote for: TRACTOR: SKID STEERS AND OEM ATTACHMENTS Vendor Name:

More information

series 5002 B O O M T R U C K S

series 5002 B O O M T R U C K S series 5002 B O O M T R U C K S features 50 Ton (45,4 Mton) Capacity 4-Section 110 (33,5 M) Proportional 4-Section 96 (29,3 M) Proportional 2-Section 32 (9,8 M) To 49 (14,9 M) Telescopic Offset Jib (15,

More information

ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required)

ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required) Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: ROAD MACHINERY & SUPPLIES ANDY SCHWANDT 5633 W. HWY 13 SAVAGE, MN 55378 952-895-7056

More information

STATE OF MINNESOTA Pricing Pages (Typed Responses Preferred)

STATE OF MINNESOTA Pricing Pages (Typed Responses Preferred) Vendor Name: Ruffridge-Johnson Equipment Co, Inc Contact Person: Scot Ender Street Address: 3024 Fourth Street SE P.O. Box: City, State, Zip Minneapolis, MN 55414 Phone #: 612-378-9558 Toll Free #: 800-462-5383

More information

DIRECTIONAL ROAD SWEEPER

DIRECTIONAL ROAD SWEEPER Price quote for: DIRECTIONAL ROAD SWEEPER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Road Machinery & Supplies Co. Andy Schwandt 5633 West Hwy

More information

DIN H2-B3 ANSI B30.5 OSHA

DIN H2-B3 ANSI B30.5 OSHA \ service cranes line Crane structure designed according DIN 15018 Standards Lifting class H2B3 Complies with ANSI B30.5 (1989, rev. 1992) OSHA 1910180, dtd 7191 ELECTROHYDRAULIC CRANES Cranes with electrical

More information

Furnish separate price quote for: EXCAVATOR

Furnish separate price quote for: EXCAVATOR Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Lano Equipment - Anoka Scott Fahey 6140 Hwy 10 NW Anoka, MN 55303 763-323-1720

More information

ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS - January, 2015

ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS - January, 2015 Price quote for: ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS - January, 2015 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Titan Machinery

More information

40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area

40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area 40142R 40142R SIDE VIEW DIAGRAM Maximum Vertical Reach 210'/64 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 41,700 lbs/18 915 kg Jib

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

data models 30100C 30124C product guide contents features 30 ton (27,3 mton) capacity 5-section 124' (37,8 m) proportional boom

data models 30100C 30124C product guide contents features 30 ton (27,3 mton) capacity 5-section 124' (37,8 m) proportional boom data features ton (27,3 mton) capacity models 0C 4C 5-section 4' (37, m) proportional boom 4-section 0' (,5 m) proportional boom 134' " (41 m) maximum main boom tip height 2-section, ' " (9,3 m) to 55'

More information

CONTENTS TC500 SERIES TELESCOPIC CRANE

CONTENTS TC500 SERIES TELESCOPIC CRANE TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 38,600 lbs. Engine Make & Model. Volvo D6H Tier (Interim 4 or Final)?

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 38,600 lbs. Engine Make & Model. Volvo D6H Tier (Interim 4 or Final)? Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Nuss Truck & Equipment Mike Sweeney 12540 Dupont Avenue South Burnsville, MN

More information

TRACTOR: LOADER-BACKHOE

TRACTOR: LOADER-BACKHOE Price quote for: TRACTOR: LOADER-BACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company Jesse Miller 12500 Dupont

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 66,338 lb. Engine Make & Model

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 66,338 lb. Engine Make & Model Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: RDO Equipment Company Jesse Miller 12500 Dupont Avenue South Burnsville, Minnesota

More information

Furnish separate price quote for: EXCAVATOR. 1.1 Make & Model BOBCAT E63 Operating Weight

Furnish separate price quote for: EXCAVATOR. 1.1 Make & Model BOBCAT E63 Operating Weight Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: CLARK EQUIPMENT COMPANY dba BOBCAT COMPANY RANDY FUSS 250 EAST BEATON DRIVE P.O. BOX 6000

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

FOLD-A-WAY BUMPER CRANES

FOLD-A-WAY BUMPER CRANES FOLD-A-WAY BUMPER CRANES ATERIAL HANDLING SOLUTIONS SINCE 1982 Much More Than Just A Crane! CRANE HITCH WINCH BUMPER MAN-LIFT WESTERN MULE CRANES HELPING YOU GET THE JOB DONE NOW YOU SEE IT... SINCE 1982

More information

You can own this equipment with our Lease to Buy Monthly Payment of $ on approved credit by lender!

You can own this equipment with our Lease to Buy Monthly Payment of $ on approved credit by lender! Sacramento: 916.440.8090 Reno: 775.972.7677 Santa Ana: 714.265.6550 www.coastlinecd.com Sacramento Location 325 North 5th Street Sacramento, CA 95811 You can own this equipment with our Lease to Buy Monthly

More information

To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM

To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM TC500 SERIES TELESCOPIC CRANE CONTENTS 2 /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 76,557 lb. Engine Make & Model

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 76,557 lb. Engine Make & Model Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: RDO Equipment Company Jesse Miller 12500 Dupont Avenue South Burnsville, Minnesota

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick

More information

Techcrane International, LLC

Techcrane International, LLC We are pleased to present our quotation for API Monogrammed EBI Crane Model TC150-56-100: Certification And Accreditation The crane quoted herein is designed and manufactured in accordance with all structural

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required)

STATE OF MINNESOTA PRICING PAGES (Typed responses required) Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: RDO Equipment Company / Nortrax Jesse Miller 12500 Dupont Avenue South Burnsville,

More information

77 Ton Tele-Boom Crawler Crane. mantiscranes.com

77 Ton Tele-Boom Crawler Crane. mantiscranes.com 15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

32117R TECHNICAL SPECIFICATIONS 32117R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height

32117R TECHNICAL SPECIFICATIONS 32117R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height 32117R 32117R SIDE VIEW DIAGRAM Maximum Vertical Reach 153'/46,6 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 64,000 lbs/29 030 kg Boom Length 117 /35,6 m Crane Weight (Standard)

More information

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 49,139 lb. Engine Make & Model

STATE OF MINNESOTA PRICING PAGES (Typed responses required) 49,139 lb. Engine Make & Model Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: RDO Equipment Company Jesse Miller 12500 Dupont Avenue South Burnsville, Minnesota

More information

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 30105F-D 30105F-D SIDE VIEW DIAGRAM Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard)

More information

CONTENTS TC500 SERIES TELESCOPIC CRANE

CONTENTS TC500 SERIES TELESCOPIC CRANE TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...

More information

CONTENTS TC500 SERIES TELESCOPIC CRANE

CONTENTS TC500 SERIES TELESCOPIC CRANE TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...

More information