Molex Premise Networks Systems Catalogue

Size: px
Start display at page:

Download "Molex Premise Networks Systems Catalogue"

Transcription

1 Molex Premise Networks Systems Catalogue

2 PowerCat 6 The Cat 6 Solution PowerCat 6 The Cat 6 Solution The PowerCat 6 Product Range Molex Premise Networks PowerCat 6 system product range is designed to comply with the draft Category 6 standards: (TIA/EIA 568B-2-1 Draft (PN 3727), ISO/CENELEC Class E (2001), ISO/IEC JTC 1/SC 25/WG 3 N 696. The PowerCat 6 Product Range The performance of the system is enhanced by the patented Molex plug and socket combination, allowing Category 6 level performance and backwards compatibility with the Molex Premise Networks PowerCat (C5E) system. The PowerCat 6 Product Range Molex Premise Networks recommends that the full range of PowerCat 6 products is used in a system to provide the performance indicated in the draft Category 6 standard. PowerCat 6 Cable Unshielded 4 Pair PVC and LSZH Cable Central separator for the reduction of NEXT & ELFEXT 24 AWG solid conductor Colour coded pairs for ease of termination 500 metre reel PowerCat 6 MOD-SNAP Module The MOD-SNAP modular system provides a flexible and versatile method of installation, allowing the user the choice of installing as many data outlets as required. The modules are fully assembled units featuring the Molex Premise Networks low profile PowerCat 6 RJLP connector and a 25x38.5mm fascia (BT 6C size), shutter and spring assembly. enables installation. Protected labelling facility Compatible with MOD-SNAP wallplates Ideal for floorbox applications CAA Cable 500m Reel PVC - UTP CAA Cable 500m Reel LSZH - UTP - IEC Other cable variants available - For more information contact Customer Services MMS MOD-SNAP RJLP Module, RJ45, 568B, UTP PowerCat 6 Patch Panels Molex Premise Networks patch panels are a versatile means for connecting horizontal cabling. Featuring an integral rear cable management tray for ease of installation and cable dressing. Port labelling is also featured for site specific network administration. Suitable for high speed data transmission, these panels were designed to meet the highest performance standards in the industry. Molex Premise Networks patented KATT IDC is terminable using industry standard tooling. Fixing kit, cable ties and installation instructions are included. 16 Ports 1U 24 Ports 1U 48 Ports 2U PCB Mounted KATT IDC EIA 568B wired RJ45 jacks Standard 19" rack mounted Graphite grey textured finish Integral cable management PowerCat 6 Euromod Module The Euromod modular system provides a flexible and versatile method of installation. This modular system offers a wide range of wallplates and modules that allow the user to install as many data outlets as required. The modules are fully assembled units featuring the Molex Premise Networks low profile PowerCat 6 RJLP connector and a 25x50mm fascia, shutter and spring assembly. enables installation. Compatible with existing range of Euromod wallplates PID PID PID Port Panel 1U RJ45 568B - UTP 24 Port Panel 1U 568B - UTP 48 Port Panel 2U 568B - UTP MEU Euromod RJLP Module, RJ45, 568B, White - UTP PowerCat 6 Patch Cords Unshielded 4 Pair Stranded Cable Pre-terminated with WE8W Molex Plugs Overmoulded strain relief boots Available in 1,2,3 and 5 metre lengths PowerCat 6 Office Block Designed in accordance with TSB75, Office Block is the ideal solution for open office cabling. Its attractive and compact design facilitates a simple, organised installation for areas where space is limited. Designed to support high speed data transmission systems, Office Block utilises the Molex Premise Networks RJSE connector. Compact, attractive and versatile 1, 2, 4 & 6 port surface mount block Cable entry from rear knockouts Labelling facility Can be mounted with screws or magnet Snap on shutters are provided Dual colour coded IDC blocks provide the option of 568A or 568B wiring PCD * Patch Cord 1m grey - UTP PCD * Patch Cord 2m grey - UTP PCD * Patch Cord 3m grey - UTP PCD * Patch Cord 5m grey - UTP * Colour Options - C = Red, E = Grey, H = Blue, J = Green, K = Yellow SID SID SID SID SID SID SID Office Block 1 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP Office Block 2 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP Office Block 4 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP Office Block 6 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP Office Block 2 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B - UTP Office Block 4 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B - UTP Office Block 6 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B - UTP

3 PowerCat -UTP The Cat 5e Solution PowerCat -UTP The Cat 5e Solution The PowerCat UTP Product Range Molex Premise Networks Category 5e product range is known as the PowerCat system. Designed to meet or exceed the requirements of: TIA/EIA 568A-A5, ISO/CENELEC Class D (2002), ISO/IEC JTC 1/SC 25/ WG 3 N 696 standards. The product range offers backwards compatibility with Category 5 systems, with enhanced performance in support of the Gigabit Ethernet protocol. PowerCat UTP Cable 4 pair PVC or LSZH Cable Colour coded pairs for ease of termination 305m easy spool box and 1 km reel available PowerCat UTP Patch Cords Unshielded 4 Pair Stranded Cable Pre-terminated with WE8W Plugs Strain Relief Boots 39.A Pair UTP, PVC, Cat 5e Cable, 305m Box 39.A Pair UTP, PVC, Cat 5e Cable, 1km Reel CAA Pair UTP, LSZH, IEC332.3, Cat 5e Cable, 305m Box CAA Pair UTP, LSZH, IEC332.3, Cat 5e Cable, 1km Reel CAA Pair UTP, LSZH, IEC332.1, Cat 5e Cable, 1km Reel CAA Pair UTP, LSZH, IEC332.1, Cat 5e Cable, 305m Box PCD * PCD * PCD * PCD * PCD * PCD * * Colour Options - C = Red, E = Grey, H = Blue, J = Green, K = Yellow UTP Patch Cord 1m UTP Patch Cord 2m UTP Patch Cord 3m UTP Patch Cord 5m UTP Patch Cord 7m UTP Patch Cord 10m PowerCat UTP Patch Panels Molex Premise Networks patch panels are a versatile means for connecting horizontal cabling. Featuring an integral rear cable management tray for ease of installation and cable dressing. Port labelling is also featured for site specific network administration. Suitable for high speed data transmission, these panels were designed to meet the highest performance standards in the industry. Molex Premise Networks patented KATT IDC is terminable using industry standard tooling. Fixing kit, cable ties and installation instructions are included. 24 Ports 1U 48 Ports 2U PCB Mounted KATT IDC EIA 568B wired RJ45 jacks Standard 19" rack mounted Graphite grey textured finish Integral cable management PowerCat MOD-SNAP & Euromod Modules The MOD-SNAP & Euromod modular systems provide a flexible and versatile method of installation, allowing the user the choice of installing as many data outlets as required. The modules are fully assembled units featuring the Molex Premise Networks low profile Cat 5e RJLP connector and a 25x38.5mm fascia (BT 6C size, MOD-SNAP)) or 25x50mm fascia (Euromod), shutter and spring assembly. enables installation. Protected labelling facility Compatible with MOD-SNAP wallplates Ideal for floorbox applications (MOD-SNAP) Compatible with Euromod Wallplates 27.1B.241.A005G 24 Port Panel - With Cover, 1U, 568B PID Port Panel, 1U, 568B* PID Port Panel, 2U, 568B* * Product is available without Port Identification Markings - Contact Customer Services for Part No s. 42.1B.011.A B.011.A0042 MEU MOD-SNAP RJLP Module, RJ45, 568B, Cat 5e, White Euromod RJLP Module, RJ45, 568B, Cat 5e, White Angled Euromod RJLP Module, RJ45, 568B, Cat 5e, White PowerCat UTP High Density Patch Panels Molex Premise Networks PowerCat (C5E) High Density Patch Panels are ideal for ISP applications or installations where cabinet/rack space is at a premium. Providing 32 or 48 ports in 1U, these patch panels offer an integral rear cable management tray specifically designed for neat and easy cable dressing. The front of the panel has a protected labelling facility for clear port labelling. Suitable for high speed data transmission, this panel was designed to meet the highest performance standards in the industry, utilising the PowerSum principle of measurement and testing. PID PID PowerCat (C5E) performance 32 Ports 1U 48 Ports 1U PCB Mounted KATT IDC EIA 568B wired RJ45 Jacks Standard 19 rack mounted Graphite grey textured finish 48 Port PowerCat (C5E) Patch Panel 1U 32 Port PowerCat (C5E) Patch Panel 1U PowerCat Office Block Designed in accordance with TSB75, Office Block is the ideal solution for open office cabling. Its attractive and compact design facilitates a simple, organised installation for areas where space is limited. Designed to support high speed data transmission systems, Office Block utilises the Molex Premise Networks RJSE connector. SID SID SID SID SID SID SID Compact, attractive and versatile 1, 2, 4 & 6 port surface mount block Cable entry from rear knockouts Labelling facility Can be mounted with screws or magnet Snap on shutters are provided Dual colour coded IDC blocks provide the option of 568A or 568B wiring Office Block 1 port, RJ45, RJSE, Shuttered, White, 568A/B Office Block 2 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B Office Block 4 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B Office Block 6 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B Office Block 2 port, RJ45, RJSE, Shuttered, White, 568A/B Office Block 4 port, RJ45, RJSE, Shuttered, White, 568A/B Office Block 6 port, RJ45, RJSE, Shuttered, White, 568A/B

4 PowerCat - FTP The Cat 5e Solution PowerCat - FTP The Cat 5e Solution The PowerCat FTP Product Range Molex Premise Networks Category 5e product range is known as the PowerCat system. Designed to meet or exceed the requirements of: TIA/EIA 568A-A5, ISO/CENELEC Class D (2002), ISO/IEC JTC 1/SC 25/ WG 3 N 696 standards. The product range offers backwards compatibility with Category 5 systems, with enhanced performance in support of the Gigabit Ethernet protocol. PowerCat FTP Cable 4 pair PVC or LSZH Cable Colour coded pairs for ease of termination 305m easy spool box and 1 km reel available PowerCat MOD-SNAP FTP Module The MOD-SNAP modular system provides a flexible and versatile method of installation, allowing the user the choice of installing as many data outlets as required. The modules are fully assembled units featuring the Molex Premise Networks low profile Cat 5e RJLP connector and a 25x38.5mm fascia (BT 6C size), shutter and spring assembly. Protected labelling facility Compatible with MOD-SNAP wallplates Ideal for floorbox applications CAA CAA CAA CAA CAA CAA Pair FTP, PVC, Cat 5e Cable, 305m Box 4 Pair FTP, LSZH, IEC332.3, Cat 5e Cable, 305m Box 4 Pair FTP, PVC, Cat 5e Cable, 1km Reel 4 Pair FTP, LSZH, IEC332.3, Cat 5e Cable, 1km Reel 4 Pair FTP, LSZH, IEC332.1, Cat 5e Cable, 1km Reel 4 Pair FTP, LSZH, IEC332.1, Cat 5e Cable, 305m Box enables installation. The FTP connector provides continuity of the cable shield by providing a termination point for the drain wire. MMS MOD-SNAP RJLP Module, RJ45, 568B, Cat 5e, White PowerCat FTP & STP Patch Panels The 16 and 24 Port Sliding STP Patch Panels allow easy front loading access for installation, termination and maintenance. A fixed 24 Port version of this panel is also available and full shielding is achieved on all versions by the provision of a braided foam RFI strip on the base and cover of the panel into which the foil or braid of the cable is pressed after termination. The 24 Port FTP Patch Panel offers through shield continuity and is a versatile method of connecting horizontal cabling in a FTP environment. PID PID PID PID & 24 Port Sliding or Fixed STP version FTP 24 Port 568A/B wired Integral rear cable management Port Identification 19 rack mounted Graphite Grey finish 24 Port Sliding Panel, 1U, 568A/B, STP 16 Port Sliding Panel, 1U, 568A/B, STP 24 Port Fixed Panel, 1U, 568A/B, FTP 24 Port Fixed Panel, 1U, 568A/B, STP PowerCat Euromod FTP Modules The Euromod modular system provides a flexible and versatile method of installation. This modular system offers a wide range of wallplates and modules that allow the user to install as many data outlets as required. The modules are fully assembled units featuring the Molex Premise Networks low profile Cat 5e RJLP connector and a 25x50mm fascia, shutter and spring assembly. enables installation. The FTP connector provides continuity of the cable shield by providing a termination point for the drain wire. MEU Compatible with Euromod Wallplates Euromod RJLP Module, RJ45, 568B, Cat 5e, White PowerCat FTP Patch Cords Shielded 4 Pair Stranded Cable Pre-terminated with WE8W Plugs Strain Relief Boots PowerCat Euromod 360 STP Module The RJ45 shuttered module is designed specifically for areas where there are high levels of Electro Magnetic Interference (EMI) and offers the user 360 shield protection. A two piece Die Cast shield is used for simple installation avoiding sharp edges which might damage cable. Die cast shield for EMC protection RJ45 shuttered and with label facility PCD * PCD * PCD * PCD * PCD * PCD * * Colour Options - C = Red, E = Grey, H = Blue, J = Green, K = Yellow FTP Patch Cord 1m FTP Patch Cord 2m FTP Patch Cord 3m FTP Patch Cord 5m FTP Patch Cord 7m FTP Patch Cord 10m These fully assembled modules utilise Molex Premise Networks unique patented RJLP RJ45 connector. MEU PowerCat 360 Single Channel Euromod RJLP Module, RJ45, 568B, Cat 5e, White

5 Wallplates Auxiliary Products Wallplates Molex Premise Networks Wallplate systems are a highly popular economic alternative to the Euromod and MOD-SNAP systems. These plates form part of the PowerCat product range. Fixed Wallplates The wallplates are a complete assembly and include connector. Offering a low profile, space saving design that enables installation in shallow backboxes and trunking. UK standard 86x86 mm fascia Spring loaded Shutters 1 or 2 port options available UTP or FTP ISDN Range The Molex Premise Networks ISDN range offers a versatile method of installing ISDN services in a structured cabling environment. Built-in resistors provide the correct termination of the ISDN Basic Rate S-Bus. Fitted with built-in resistors 24 Port Patch Panel Euromod, MOD-SNAP and fixed wallplate options available Blue shutter distinguishes ISDN No special application tooling requirements Fully compliant with ISO 8877 WNC WNC WNC WNC Port PowerCat Fixed Shuttered UTP Wallplate 568B Cat 5e, White 2 Port PowerCat Fixed Shuttered UTP Wallplate 568B Cat 5e, White 1 Port PowerCat Fixed Shuttered FTP Wallplate 568B Cat 5e, White 2 Port PowerCat Fixed Shuttered FTP Wallplate 568B Cat 5e, White A001G 24 Port ISDN BUS Panel A0012 Euromod ISDN Module, RJLP, Basic Rate, White A0012 ISDN Basic Rate Wallplate, RJLP, White A0012 ISDN Basic Rate and RJ45 Cat 5e Double Wallplate, RJLP, White A0012 MOD-SNAP ISDN Module, RJLP, Basic Rate, White 42.A0020 RJ45 to RJ45 Socket, 150mm Line Adapter Unit ISDN Basic Rate Quadplate The 4 Port shuttered fixed wallplate (Quadplate) is a complete assembly, comprising 4 Cat 5e RJLP RJ45 connectors, fascia, spring loaded shutters and protected labelling facility. The density of the wallplate makes it ideal for situations where several services are required in one location e.g. voice, data, video conferencing. UK standard 86x86 mm fascia UTP or FTP Line Adapter Units The Molex Premise Networks Line Adapter Unit allows telecommunications equipment fitted with standard BT telephone plugs to be connected to RJ45 based structured cabling systems. Ideal for floorbox applications OFTEL GA5 approved Converts a direct line to RJ45 cabling system Flying lead for flexibility The Quadplate is designed to fit in standard UK backboxes (86x86mm external dimension) with 2 (only) screw fixing positions. The minimum internal backbox dimension clearance allowable is 76x76mm up to 81x81mm. WNC WNC Port PowerCat Shuttered UTP Wallplate 568B Cat 5e, White 4 Port PowerCat Shuttered FTP Wallplate 568B Cat 5e, White A RJ45 to BT6L Socket, 150mm Cord (PSTN) A RJ45 to BT6L Socket, 3m Cord (PSTN) A RJ45 to BT6L Socket, 150mm Cord (PABX) A RJ45 to BT6L Socket, 3m Cord (PABX) RJ45 to BT6L Socket, 150mm Cord Secondary RJ12 to BT6L PABX 150mm (Analogue - Secondary, Pins 4 & 5 digital) Euromod and MOD-SNAP Wallplates The Euromod and MOD-SNAP wallplate systems provide a flexible and versatile method of installation. Available in single and double gang versions the wallplates are designed to accept Euromod (25x50mm fascia) and MOD-SNAP (25x38.5mm fascia) modular ranges. Euromod - 50x50mm aperture MOD-SNAP x22mm aperture Flexible system allowing the installation of as many modules as required Testers and Tooling The SLT3S Tester is a rugged, lightweight product designed to verify the integrity of 1-, 2-, 3-, and 4-pair UTP or STP channels. Incorporating a unique 3-in-1 design, this tester features built-in modular jacks for USOC, 568A and 568B wiring sequences. Innovative 3-in-1 design features modular jacks for testing USOC, 568A and 568B cabling systems Accurately verifies the continuity and sequence of 1, 2, 3, and 4 pair UTP and STP channels Continuously-sequencing LED display provides a diagnostic readout that immediately detects shorts, opens, reversals and mis-wires at a glance Euromod Unlabelled Single Gang Wallplate - 86x86x10mm Euromod Unlabelled Double Gang Wallplate - 86x145x10mm Euromod Labelled Single Gang Wallplate - 86x86x10mm Euromod Labelled Double Gang Wallplate - 86x145x10mm MOD-SNAP Single Gang, Single Aperture - 86x86mm MOD-SNAP Single Gang, Double Aperture - 86x86mm MOD-SNAP Double Gang, 4 Aperture - 86x146mm NOTE : There are numerous Blank Modules, Bezels and Backboxes available - Contact Customer Services for more information. The termination tool was designed to provide a reliable connection at a highly competitive price. Originally developed to support the Molex Premise Networks KATT connector, the tool offers low-impact force termination, which reduces strain on the installer. Low-impact termination force Scissor style cut off Wire cutting immobiliser switch Light-weight impact resistant handle Termination Tool 33A SLT3S Shielded Tester with 9 Volt battery (U.K.) P SLT3 Carry Case

6 Molex Premise Networks Fibre Product Range Molex Premise Networks manufactures some of the most comprehensive fibre systems in the structured cabling market. Incorporating a variety of connector technology, such as; ST, Duplex SC, MTRJ, Escon, FDDI and FC. Molex Premise Networks offer total fibre solutions, ideal for either Backbone or To-The-Desk applications. Range Range Molex Premise Networks fibre range consists of; Management Panels, Enclosures, Adapter Plates, Connectors, Modules, Cable, Pre-Terminated Solutions, Adapters, Patch Cords, Splicing Equipment, Field Termination Connectors, Tool Kits and Testers. Tight Buffered Fibre Cable 900µM Tight Buffered Internal / Duct grade Aramid Yarn Strength Member ULSZH Sheath Sliding Fibre Management Panels The Sliding FMP panel is a 1U Fibre Optic panel for 24 adapter ST, 12 adapter Duplex SC & 24 adapter MTRJ. The Sliding FMP uses a sliding cable management tray to enable easy front access & termination. The depth adjustable mounting provides protection for the outgoing cable assemblies. Up to 24 adapter ST and MTRJ, and 12 adapter Duplex SC and Shuttered Duplex SC Depth Adjustable mounting Self adhesive fibre cable management system in loaded panels Two points of strain relief for fibre cable Ideal when easy access to the panel for adds, changes or maintenance is required. 62.5/125µM 50/125µM CFR CFR Core CFR CFR Core CFR CFR Core CFR CFR Core CFR CFR Core CFR CFR Core CFR CFR Core 30.A021G 30.A022G 30.A018G RFR RFR A023G RFR Fully Loaded ST Patch Panel, Cable Accessory Kit - MM Fully Loaded with ST adapters, Cable accessory kit - SM Unloaded, 24 Port ST Fully Loaded Shuttered Duplex SC Patch Panel, Cable Accessory Kit - MM Fully Loaded Shuttered Duplex SC Patch Panel, Cable Accessory Kit - SM Unloaded, 24 Port Duplex SC Fully Loaded with 24 MTRJ adapters - MM & SM Tight Buffered Fibre Cable 900µM Tight Buffered Internal / Duct grade Aramid Yarn Strength Member ULSZH Sheath E Glass Yarn - Rodent Resistant Fibre Enclosures Molex Premise Networks fibre optic enclosures are designed to suit any installation requirements. They range from the 12 fibre 601 box to the 72 fibre Demarc cabinet. All enclosures contain features for fibre management, splice holding, cable retention and labelling. All common adapter types are catered for in the form of configurable Euromod or Six-Pak Modules. ST, SC, & MTRJ variants available Demarc Cabinet can contain up to 72 fibres 601 Enclosure excepts Mechanical and Fusion Splices Security Lockable 601 Box 62.5/125µM 50/125µM 9/125µM CFR CFR CFR Core 91.A1000 CFR CFR Core CFR CFR n/a 6 Core 91.A1010 CFR CFR Core 91.A1020 CFR CFR Core 91.A1030 CFR n/a 16 Core CFR CFR n/a 24 Core 15.B033G WFR WFR WFR WFR WFR WM-12 Wall Mounted Enclosure 36P Patch/Splice Demarc Cabinet 72P Patch/Splice Demarc Cabinet Fully Loaded 8 Port 601 Box, ST - MM Fully Loaded 8 Port 601 Box, Duplex SC - MM Fully Loaded 12 Port 601 Box, MTRJ - MM & SM Demarc Cabinet Fibre Management Panels The Fibre Management Panel is a 1U 19" Rack mounted panel which allows direct mounting of the connectors into the front panel. Available in 24 adapter ST, 12 adapter Duplex SC and 24 adapter MTRJ versions all loaded panels come complete with a full range of cable fixing accessories. 19" rack compatible Up to 24 adapter ST and MTRJ, and 12 adapter Duplex SC and Shuttered Duple SC Self adhesive fibre cable management system on loaded panels Two points of strain relief for incoming fibre cable Termination Tooling As fibre continues to migrate into the network the need for frequent termination setups, involving few fibres, will continue to increase. Traditional terminations that require power ovens (traditional or pre-loaded epoxy) or expensive tooling (splicing and crimping) are no longer practical. Low insertion loss of 0.32 db Typ. Operating Temperature - 10 C to 60 C Complies with EIA/TIA 568A Termination time - 2 minutes 30.A011G 30.A012G 30.A008G 30.A016G 30.A017G 30.A013G RFR Fully Loaded with ST adapters, cable accessory kit - MM Fully Loaded with ST adapters, cable accessory kit - SM Unloaded, 24 Port ST Fully Loaded with Duplex SC adapters, cable accessory kit - MM Fully Loaded with Duplex SC adapters, cable accessory kit - SM Unloaded, 24 Port Duplex SC Fully Loaded with 24 MTRJ adapters - SM & MM The X-Press Termination Kits offer field terminable connectors, that are cost effective and require minimal tooling. 91.A1230 X-Press Termination Kit, 12 ST Connectors 91.A1270 X-Press ST Termination toolkit AFR X-Press Termination Kit, 12 Simplex SC Connectors AFR X-Press SC Termination toolkit

7 Fibre Adapters Molex Premise Networks offer a comprehensive range of adapters, both multimode and singlemode. These adapters can be used in fibre management panels, wall enclosures and wall outlets ST, SC, MTRJ, Escon & FDDI variants available Flange, Snap and Screw mount For complete list of available adpaters speak to Customer Services Angled Euromod Modules Euromod is a modular range of outlets, plates and connectors designed for use in different countries. In addition to the existing range of Euromod modules for use with copper media, Molex Premise Networks also provides a range of solutions for Fibre Optic applications. Angled 50x50mm module Available with ST, shuttered Duplex SC/ST, shuttered Duplex SC, FDDI/ST, ESCON/ST, MTRJ & Shuttered MTRJ Adapters Multimode & Singlemode configuration Compatible with 32mm deep trunking Permits a 30mm bend radius 91.A0160 ST Adapter, MM, Metal body 91.A0150 ST Adapter, MM, Polymeric body 91.A1190 Shuttered Duplex SC/Duplex SC, MM, Flange mount 91.A1300 Shuttered Duplex SC/Duplex SC, MM, Snap mount 91.A0430 Duplex SC/Duplex SC, MM, Flange mount 91.A0500 Duplex SC/Duplex SC, MM, Snap mount AFR MTRJ/MTRJ, MM & SM, Flange mount In combination with the existing Euromod product range and Fibre Management Back Box these angled modules will provide a unique fibre to the desk solution. MEU MEU MEU MEU Euromod Angled ST/ST, MM, 50x50mm, 4 Adapters Euromod Angled Shuttered Duplex SC/SC, MM, 50x50mm, 2 Adapters Euromod Angled MTRJ/MTRJ, MM, 50x50mm, 2 Adapters Euromod Angled Shuttered MTRJ/MTRJ, MM, 50x50mm, 2 Adapters Fibre Connectors Molex Premise Networks offer a comprehensive range of connectors for LAN applications. The connectors are available for singlemode or multimode applications. Manufactured with a ceramic ferrule to ensure quality and performance ST, SC, MTRJ, Escon & FDDI variants available For complete list of available connectors contact Customer Services AFR Field Terminable MTRJ, MM 62.5/125 Polishless Connector - Male AFR Field Terminable MTRJ, MM 50/125 Polishless Connector - Male 91.A0084 ST, MM, Polymeric nut 91.A0094 ST, MM, Metal nut 91.A0104 ST, MM, Metal nut - 90 boot 91.A0114 ST, MM, Metal nut - 900µm boot 91.A0290 SC, MM, Ceramic ferrule, 90 boot 91.A0310 SC, MM, Ceramic ferrule, 900µm boot Enclosure Application Euromod Modules Euromod is a modular range of outlets, plates & connectors designed for use in different countries. In addition to the existing range of Euromod modules for use with copper media, Molex Premise Networks also provides a range of solutions for Fibre Optic applications. These modules are designed for use within the WM-12 fibre enclosure. 25x50mm & 50x50mm modules Euromod compatible Available with ST, Duplex SC, Shuttered Duplex SC and MTRJ adapters Multimode & Singlemode configuration Other variants available for more information contact Customer Services Euromod ST,MM fibre module, 25x50mm, 2 Adapters 17.A0162 Euromod Duplex SC,MM fibre module, 25x50mm, 1 Adapter 17.A0202 Euromod Duplex Shuttered SC, MM fibre module, 25x50mm, 1 Adapter MEU Euromod MTRJ, MM & SM fibre module, 25x50mm, 2 Adapters 17.A0312 Euromod ST/ST, MM fibre module, 50x50mm, 6 Adapters 17.A0252 Euromod Duplex SC/SC, MM fibre module, 50x50mm, 3 Adapters MEU Euromod MTRJ, MM & SM fibre module, 50x50mm, 4 Adapters Fibre Patch Cords We offer a comprehensive range of fibre optic cable assemblies for singlemode and multimode applications. Stocks are available in 1m, 2m, 3m, and 5m lengths, see matrix below for Part No. configuration. Connector Type, each end : 0 = No connector (pigtails) 1 = ST 2 = FDDI 3 = SC 4 = ESCON 5 = ST II 6 = ST with right angle boot 7 = SMA Fibre Type : 5 = 50/125µm 6 = 62.5 / 125µm 8 = 9/125µm (SM) Jacket Type : 2 = LSZH 8 = SC with right angle boot 9 = SC Duplex F = FC/PC M = ModLink L = LC A = MTRJ - Male B = MTRJ - Female Lowest Number First Cable Type : 1 = Simplex 2 = Duplex 3 = 900µm 91.xx.xx2.xxxxx For example : To order a 1 metre Duplex LSZH 62.5 ST to SC Patch Cord, the part number would be N Jacket Colour E = Dark Grey (50/125µm) K = Yellow (9/125µm) N = Orange (62.5/125µm) Polishing Code : 0 = Standard 1 = SM, RL > 45dB 2 = SM, RL > 55dB 3 = SM, RL > 70dB (angle polish) Length Metres Fibre Management Back Box The Fibre Management Back Box provides accommodation for direct termination or splicing of up to eight fibres and is designed to maintain the minimum bend radius requirements for fibre optic cable when used in conjunction with Euromod Angled Modules. This product is also suitable for applications which require copper modules, and can accommodate up to2 flat Euromod PowerCat or secondary voice modules as well as 4 fibres. It is packaged complete with threaded inserts for trunking applications and adhesive strip for mounting in a surface mount backbox. WFR Fits inside 32mm UK standard double gang backbox for surface mount applications Up to 8 fusion splices can be accommodated securely Provides storage for up to 8m of 900µM tight buffered fibre Correct bend radius maintained when used with angled modules No additional backbox required for trunking applications Mixed media capability Fibre Management Back Box

8 Cable Management Molex Premise Networks Cable Management Cable Management is an important part of any installation. Combining aesthetics with functionality, the Molex Premise Networks range of rack mountable cable management products offer cable management with minimal effort. Molex Premise Networks offer a extensive range of cabinet solutions from wall and floor mounted cabinets to the innovative Universal Patching Frame. Range The basic design principle of the Universal Patching Frame (UPF) is to provide a simple cable loom support with maximum accessibility, together with a universal patch panel mounting facility. Range Fibre Adapter Plates Molex Premise Networks provides a simple solution which allows you to field configure many of its fibre optic products using 6-Pak adapter plate. The plates are loaded with high quality Duplex SC, ST, MTRJ, FC, FDDI, and ESCON adapters. No tools are required as the plates install with a simple snap rivet, making installation and changes simple. AFR AFR AFR AFR AFR Available with ST, Duplex SC and MTRJ adapters Multimode & Singlemode configuration For use within the Demarc Cabinet Simple snap rivet installation Other variants available for more information contact Customer Services 6-Pak ST, MM ST to Duplex SC, MM Duplex SC, MM (Beige) 6-Pak MTRJ, SM/MM Blanks - 4/pkg Cable Management Ring Run Panels come complete with flexible plastic rings which are designed to aid installations by providing a speedy method of cable dressing. Blank Panels provide the in-fill for the tidy looking cabinet installation. Cable tidy brush panel offers the user the ability to hide unsightly cables behind the brush, but with the convenience of access to these cables if necessary. 25.A013G 25.A016G 25.A018G 25.A019G 25.A029G 25.A046G 25.A047G 19" Rack Mountable 1U and 2U Styling complements Molex Patch Panel Range Graphite (standard) and RAL 7032 (beige) colour finishes available 2U Ring Run Panel (5 Rings) 1U Ring Run Panel (5 Rings) 1U Blank Panel 2U Blank Panel 1U Cable Tidy Brush Panel 2U Ring Run Cover (6 Pack) 1U Ring Run Cover (6 Pack) Splicing Accessories If splicing is your preferred method of terminating fibre, Molex Premise Networks can supply all the consumables necessary. The splice tray is suitable for fusion and mechanical splices, and fits neatly in our patch panels and enclosures. Accepts up to 12 Fusion splices or 10 Mechanical splices For use within fixed and sliding Fibre Management Panels, FMS Plus and the Demarc cabinet 91.A1150 Fibre Fusion Splice Tray with Cover, Including 2 fusion splice holders 91.A1160 Fibre Splice Tray with Cover, Including 2 mechanical splice holders 91.B0110 Mechanical Splice MM 91.B0120 Mechanical Splice SM KFR mm Splice Protector KFR mm Splice Protector Optical Loss Tester Molex Premise Networks FLT4 Optical Loss Test Set is an easy to use and inexpensive solution for attenuation testing of multimode systems. The FLT4 test set consists of a dual wavelength optical power source and optical power meter in a rugged plastic carry case complete with ST adapter cap and operation manual. In addition, each optical source and optical power meter features rubber protective boots to prevent accidental damage or abuse to the units. TFR AFR Low cost Loss measurement Hand held units Field portable Units housed in rubber protective boots Rugged carry case User friendly Battery operated Zero Out option FLT4 Optical Loss Test Set Replacement ST Adapter Cap ST and STII, ESCON and MTRJ are registered trademark of Lucent Technologies, IBM and AMP Technologies respectively. Universal Patching Frame (UPF) The universal patching frame is 42U high and available in a 42 arm version. The tubular construction also ensures that the minimum bend radius, as specified by ISO/IEC and ANSI/TAI/EIA-568-A, is not exceeded preventing cable from being damaged or performance impaired. Conventional cable trays have been replaced with an open 50mm x 25mm steel wire mesh, to give finger through access to assist in tracing patch cord paths and tying off. Equipment mounting angles are secured by bolts which allow for installation of 19 or 530mm patch panels. Fixings are provided for optional, rear mounting verticals. The frame can be totally enclosed with the addition of side covers and front and rear doors. Cable-friendly tubular construction ensures system integrity Open frame maximises access for fast and simple installation Horizontal arms enhance cable management 19 inch standard allows active equipment and cabling to be accommodated in the same cabinet Minimal footprint saves space Lockable doors option for added security Baying kit allows frames to be linked together in large installations Clean earth bus bar for shielded applications Range of accessories (see specification below) Suitable for copper and fibre applications Slip joint construction allows the frame to be delivered in flat-pack and quickly assembled UPF u Open frame assy - 42 arm (Product packaged in 2 cartons) UPF Front sill assy kit (1) UPF Glass door assy (2 halfwidth doors) UPF Side cover - left UPF Side cover - right UPF Rear door assy kit UPF Top cover ventilated UPF Fan tray - c/w 2 fans UPF Fan tray - c/w 4 fans UPF Equipment mounting angles (2) UPF Baying kit UPF Bus bar assy UPF Service shelf (3) UPF Modem shelf UPF Power dist unit - 10 way vert (UK) UPF Power dist unit - 6 way hor (UK) UPF Fixed shelf - 400mm deep UPF Fixed shelf - 600mm deep The information in this document is subject to change without notice. Molex Premise Networks assumes no responsibility for any errors that may appear in this document

9 EMEA Headquarters Hampshire, England Tel: 44 (0) Fax: 44 (0) France Paris, France Tel: 33 (0) Fax: 33 (0) Africa Midrand, South Africa Tel: Fax: Nordic Stockholm, Sweden Tel: Fax: Corporate Headquarters Hudson, NH U.S.A. Tel: Fax: Visit our Web site at http: // UK-SC002 Printed in UK/7k/JB/JB/ , Molex

PowerCat 6 STP DataGate Plus TM

PowerCat 6 STP DataGate Plus TM November 2004 PowerCat 6 STP DataGate Plus TM Contents: Release Announcement Data Sheets Sp. z o. o. Powązkowska 44 C Polska Tel. + 48 22 326 07 20 Fax + 48 22 326 07 30 Division Tel. 603-324-0200 Toll

More information

Premise Networks Division Product & Applications Guide Americas

Premise Networks Division Product & Applications Guide Americas Premise Networks Division Product & Applications Guide Americas Table of Contents Section Title Brands Performance Level Product Families A Copper Solutions UTP/FTP PowerCat TM Category 6 Enhanced Category

More information

7 x RJ 45 ports x RJ 45 ports + 1 LC type optic port

7 x RJ 45 ports x RJ 45 ports + 1 LC type optic port configure your LCS 2 system LCS 2 PANELS AND CONNECTOR UNITS (see p. 496, 501, 504) LCS 2 cat. 6 A LCS 2 cat. 6 LCS 2 cat. 5e Patch panels 1U Fitted with 24 connectors High density patch panels Units of

More information

Molex Contents PowerCat 6A FTP PowerCat 6 UTP PowerCat 5e UTP. 165 PowerCat 5e FTP

Molex Contents PowerCat 6A FTP PowerCat 6 UTP PowerCat 5e UTP. 165 PowerCat 5e FTP Molex Contents 154-157 PowerCat 6A FTP 154 PowerCat U/FTP LSZH 6A Cable 155 PowerCat 6A DataGate Unloaded Patch Panels 155 PowerCat 6A Patch Cords 155 PowerCat 6A Shielded DataGate Module Side Entry 156

More information

Tender for procurement of Passive Components of LAN & Wi-Fi and their installation. Corrigenda. Annexure/Clause For Read

Tender for procurement of Passive Components of LAN & Wi-Fi and their installation. Corrigenda. Annexure/Clause For Read Tender for procurement of Passive Components of LAN & Wi-Fi and their installation Corrigenda Sl. No. Annexure/Clause For Read Item Specifications Item Specifications 1. Annexure-I, Point No. 1.3 24 Port

More information

LX2 High Density LGX 4U Patch Panel

LX2 High Density LGX 4U Patch Panel LX2 High Density LGX 4U Patch Panel An innovative 4U, 19 and 23 rack mountable patch panel, designed for use in high density applications. It offers management of up to 288 fibres using MTP optical cassettes

More information

LX2 High Density LGX 4U Patch Panel

LX2 High Density LGX 4U Patch Panel LX2 High Density LGX 4U Patch Panel An innovative 4U, 19 and 23 rack mountable patch panel, designed for use in high density applications. It offers management of up to 288 fibres using MTP optical cassettes

More information

SW1 Swivel 1U Patch Panel

SW1 Swivel 1U Patch Panel SW1 Swivel 1U Patch Panel An innovative 1U, 19 and 23 rack mountable swivel patch panel, designed to manage up to 48 fibres. It is compatible with LC, SC and FC adaptor types. This panel can swivel up

More information

Volition. Fiber Optic Cable. 3Innovation

Volition. Fiber Optic Cable. 3Innovation Volition Fiber Optic Cable Tough enough to take it. Easy to handle. Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm

More information

SW1 Swivel 3U Patch Panel

SW1 Swivel 3U Patch Panel SW1 Swivel 3U Patch Panel An innovative 3U, 19 and 23 rack mountable swivel patch panel, designed to manage up to 144 fibres. It is compatible with LC, SC and FC adaptor types. This panel can swivel up

More information

S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC)

S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC) S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC) 1. General : 1.1 This specification covers the requirements of the standard patch cord and pigtail to be supplied to TOT Public Company Limited

More information

IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM

IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM F 19 Rack Exchange & Shelf Unit IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM 1. General : 1.1 This specification covers the requirements of the fiber distribution frame (FDF)

More information

Outlets terminate all shielded and shielded cable constructions AWG ( mm) size conductors.

Outlets terminate all shielded and shielded cable constructions AWG ( mm) size conductors. MAX 5e Shielded Modules The shielded MAX module is the cornerstone of our category 5e screened cabling systems. This product not only meets all TIA/EIA component specifications, but also exceeds ISO/IEC

More information

MTP Loose Tube Trunk Assemblies. Features. Applications.

MTP Loose Tube Trunk Assemblies. Features. Applications. Loose Tube Trunk Assemblies Up to 144 fibre loose tube optical cable assemblies designed and manufactured for high density applications that require interface. They are available in singlemode (G.652.D,

More information

AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM.

AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. Product development was driven by the need to solve troubles of cabinet rack usage as well as to provide a cabinet that will efficient networking, reliability,

More information

Knürr Smaract. Knürr Smaract. CompactRack

Knürr Smaract. Knürr Smaract. CompactRack CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.

More information

LEGRAND CABLING SYSTEM 2 PERFORMANCE FROM TECHNICAL ROOM TO WORKSTATION

LEGRAND CABLING SYSTEM 2 PERFORMANCE FROM TECHNICAL ROOM TO WORKSTATION LEGRAND CABLING SYSTEM 2 PERFORMANCE FROM TECHNICAL ROOM TO WORKSTATION 02 LCS 2 from technical room to workstation LCS 2 LCS 2 Cabling system products Complete systems with a 20-year guarantee. The new

More information

Mini5 1U Fixed Tray Fibre. Panels. Mini5 1U Sliding Tray Fibre. Panels.

Mini5 1U Fixed Tray Fibre. Panels. Mini5 1U Sliding Tray Fibre. Panels. Mini5/6 fibre Patch Panels, Cables & accessories Multimode (OM1/2/3) and Single mode (OS1) patch panels, cables, connectors and accessories to compliment the Cat5e and Cat6 structured cabling solutions.

More information

Ethernet Buccaneer BUCCANEER DATA. bulgin

Ethernet Buccaneer BUCCANEER DATA. bulgin BUCCANEER FOR DATA bulgin Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains

More information

Voice/Data/ Video Tools

Voice/Data/ Video Tools Voice/Data/ Video Tools Professionals prefer Klein's high quality materials and construction for durable long-lasting tools. Klein VDV Tools provide time savings and reliability, especially in high-volume

More information

06. har-mik INTERFACE CONNECTORS

06. har-mik INTERFACE CONNECTORS . INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,

More information

Ethernet Buccaneer IP68 BUCCANEER FOR DATA BUCCANEER DATA

Ethernet Buccaneer IP68 BUCCANEER FOR DATA BUCCANEER DATA IP68 Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains IP68 seal to panel

More information

VEROTEC Electronics Packaging

VEROTEC Electronics Packaging VEROTEC Electronics Packaging Eurotec Eurotec E u r o t e c c a s e f r a m e s Eurotec CASEFRAMES The Eurotec Caseframe is designed for applications that require the mounting / housing of Eurocard-style

More information

HARTING. Interface Connectors. People Power Partnership

HARTING. Interface Connectors. People Power Partnership 11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs

More information

Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D

Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D Application Specification Circular Plastic Connector (CPC) 114-13137 Series 45 System 05 AUG 14 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions

More information

MPO MicroCable Trunk Assembly

MPO MicroCable Trunk Assembly Product updated on June 04, 2018 Trunk Assembly Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation

More information

DATA Cable Connecting the world by TAIHAN

DATA Cable Connecting the world by TAIHAN DATA Cable Connecting the world by TAIHAN Contents UTP (Unshielded Twisted Pair) UTP Cat. 6 Four Pairs UTP Cat. 6 Premium Four Pairs 5 UTP Cat. 6 Under Carpet Four Pairs 6 UTP Cat. 5E Four Pairs UTP Cat.

More information

Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF and ZDF

Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF and ZDF Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF242430 and ZDF242430-6 Table of Contents Figure 1: Industrial Distribution Frame (IDF) Equipment Elevation

More information

AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM.

AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. Product development was driven by the need to solve troubles of cabinet rack usage as well as to provide a cabinet that will efficient networking, reliability,

More information

It s as simple as A,B,C...

It s as simple as A,B,C... TE 7000 It s as simple as A,B,C... Designing a data centre should be made easy and configuring a rack should be easier. In fact it should be as simple as ABC... This quick find brochure is designed to

More information

partial statement 106 TITUS www.efb-elektronik.de 19 Networking cabinet TITUS S (Standard)... 108-109 19 Networking cabinet TITUS E (Enhanced)...110-111 19 Networking cabinet TITUS V (pre-assembled)...

More information

LC Cable Assemblies. Fiber Optic Products Catalog. Product Facts. LC Cable Assembly. Hybrid LC-SC Cable Assembly

LC Cable Assemblies. Fiber Optic Products Catalog. Product Facts. LC Cable Assembly. Hybrid LC-SC Cable Assembly LC Cable Assemblies Product Facts For high performance applications/high density 125 µm Ceramic Ferrule Technology Small size 1/2 size of standard SC and FC products Singlemode and multimode Tuned singlemode

More information

Fiber Cables & Hardware

Fiber Cables & Hardware Fiber Cables & Hardware Quiktron has been the premier manufacturer of high performance fiber optic cables since 1994. Whether you are looking for standard or custom fiber cables, Quiktron can provide the

More information

Coupling ring, screw thread provides secure cable coupling. Shielded Cat 5e coupler maintains screening. Retaining Nut

Coupling ring, screw thread provides secure cable coupling. Shielded Cat 5e coupler maintains screening. Retaining Nut Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of connectors Panel gasket maintains IP68

More information

VERAK EMC. 19 Stand Alone Cabinet with Radio Frequency Protection.

VERAK EMC. 19 Stand Alone Cabinet with Radio Frequency Protection. 19 Stand Alone Cabinet with Radio Frequency Protection www.apw.eu.com Overview Material specification Frame: Steel 2.0 mm Panel mounting angles and reducing channels: Steel 2.0 mm Panel mount supports:

More information

Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions

Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions Figure 1: Industrial Distribution Frame (IDF) Equipment Elevation V00028CA Rev01 Page 1 of 14 Table of Contents

More information

Fiber Connector Shelf (CCS)

Fiber Connector Shelf (CCS) Corning Cable Systems Standard Recommended Procedure (SRP) 003-595 Issue 3, May 2007 Page 1 of 6 Fiber Connector Shelf (CCS) Table of Contents 1. General... 1 2. Precautions... 1 3. Components... 2 4.

More information

Data sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/

Data sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/ Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification multi-port Cat.5 plug to be assembled in the field 100 MBit suitable according to IEEE

More information

TOOLS AND TESTERS TERA 10G 6A F/UTP 10G 6A UTP. System 6 UTP. Premium 5e F/UTP. Premium 5e UTP. Fibre Cable Assemblies, Connectors and Cable

TOOLS AND TESTERS TERA 10G 6A F/UTP 10G 6A UTP. System 6 UTP. Premium 5e F/UTP. Premium 5e UTP. Fibre Cable Assemblies, Connectors and Cable 13.0 W W W. S I E M O N. C O M SECTION CONTENTS STM-8.............................. 13.2 13.3 STM-8........................... 13.3 S110 Test Adapters......................... 13.4 S814 Impact Tool............................

More information

THE NEW TS IT RACK 8

THE NEW TS IT RACK 8 THE NEW TS IT RACK 8 Fast and reliable Fast Loosen the 48. (9 ) quickrelease fastener, slide into the correct position, and latch Reliable Maximum load capacity up to,000 N Convenience in perfection Interior

More information

INTRODUCTION WALL MOUNT APPLICATIONS SLIMLINE BOX... 5 COMMSRAK... 5 IMRAK IMRAK

INTRODUCTION WALL MOUNT APPLICATIONS SLIMLINE BOX... 5 COMMSRAK... 5 IMRAK IMRAK INTRODUCTION WALL MOUNT APPLICATIONS SLIMLINE BOX... 5 COMMSRAK... 5 IMRAK 400... 6-7 IMRAK 600... 8-9 FLOOR MOUNT APPLICATIONS COMMSRAK... 11 IMRAK 600... 12-15 IMRAK 1400... 16-32 Specification... 17-18

More information

19" XL VDI wall mounting cabinets and accessories

19 XL VDI wall mounting cabinets and accessories 19" XL VDI wall mounting cabinets and accessories 340 36 340 38 340 49 340 52 332 25 331 36 Technical characteristics (p. 814-815) IP 20 - IK 08 Equipped with: 1 reversible curved door made of screen-printed

More information

SPEC SHEET. OmniReach FTTX Solutions. NEMA Fiber Demarcation Box (FDB) Features

SPEC SHEET. OmniReach FTTX Solutions. NEMA Fiber Demarcation Box (FDB) Features ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability,

More information

6000 Series Ethernet Buccaneer

6000 Series Ethernet Buccaneer Thermo-plastic version Patch Cord Flex Connector - Pur Jacket Cable PXP6037 Mates with PXP6033TP type panel mounting Overmoulded patchcords with IP rated connector Supplied with shielded RJ45 plug Single

More information

Heavy Duty Copper Battery Terminals

Heavy Duty Copper Battery Terminals Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and

More information

Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A

Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC

More information

USpace Midi Cabinet & Midi Server Cabinet Range.

USpace Midi Cabinet & Midi Server Cabinet Range. USpace 7210 19 Midi Cabinet & Midi Server Cabinet Range www.edpeurope.com Overview The USpace 7210 midi cabinet continues the tradition of quality, style and innovation associated with the USystems repertoire

More information

66M C5 4 x 50, Category 5, 66M connecting block clip. 10"H x 3.4"W x 1.25"D

66M C5 4 x 50, Category 5, 66M connecting block clip. 10H x 3.4W x 1.25D 66 BLOCK SYSTEM Suttle s 66 Block system is used in equipment rooms or in remote and intermediate wiring closets to connect voice or data wiring to customer premise equipment. Blocks are molded of flame

More information

Fiber Optic, Breakout cable, tight buffered, 900 microns

Fiber Optic, Breakout cable, tight buffered, 900 microns Fiber Optic, Breakout cable, tight buffered, 900 microns Features and benefits Fiber-count 2-144 fibers 900 microns buffered design for easy termination Tight buffered construction Plenum (OFNP / FT6),

More information

Optical Fibre Fibre Cables

Optical Fibre Fibre Cables Optical Fibre Fibre Cables Table of content Nexans 3 Nexans UK 4 Symbols 5 Fibre Cables 6 Optical cable speci cations 7 LANmark-OF Tight Buffer Indoor 10 LANmark-OF Tight Buffer Universal 13 LANmark-OF

More information

CONNECTORS - SINGLE POLE

CONNECTORS - SINGLE POLE CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS

More information

Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies

Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies Combining 40+ years of experience from its founding members, Clearfield designs and manufactures fiber optic cable assemblies for virtually

More information

Plug & Play AnyLAN Systems

Plug & Play AnyLAN Systems features and benefits Factory-terminated cables Watertight components with compact, rugged design Multi-fiber quick connect Factory tested Modular SPECIFICATION SHEET LAN-731-EN PAGE 1 Install with no

More information

Micro Fibre Indoor Cable Multi-core (Up to 96 Fibres) Applications. Features

Micro Fibre Indoor Cable Multi-core (Up to 96 Fibres) Applications. Features Micro Fibre Indoor Cable Multi-core (Up to 96 Fibres) 2 to 96 Micro fibre indoor cable, 12 fibre stranded sub units, 250µm coloured fibre around an fibre reinforced plastic (FRP) central non-metallic strength

More information

Data sheet CFBUS.PVC PVC - e-chain - Bus cable for medium load requirements (class 4.3.2): shielded, oil-resistant as well as flame-retardant.

Data sheet CFBUS.PVC PVC - e-chain - Bus cable for medium load requirements (class 4.3.2): shielded, oil-resistant as well as flame-retardant. Overview Bus system Profibus CAN-Bus / Feldbus CC-Link Part. No..001.021 &.022.035 Example drawing Bus system Part. No. Ethernet (CAT5 / CAT5e / GigE / PoE).040,.045 &.049 Ethernet (CAT6 A / PoE).050 FireWire

More information

Swing-Out Style Fiber Distribution Units

Swing-Out Style Fiber Distribution Units Fiber Distribution Multilink in-rack mounted termination enclosures are designed to provide connectivity and distribution solutions. Enclosures are supplied with universal mounting hardware for 19 or 23

More information

8400 Series Fiber Distribution System

8400 Series Fiber Distribution System 8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable

More information

Data sheet C6 A RJ45 field plug pro

Data sheet C6 A RJ45 field plug pro Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable

More information

Data sheet C6 A modul 24 port 180 M 1RU stainless steel

Data sheet C6 A modul 24 port 180 M 1RU stainless steel Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual modules C6modul 180 certified to

More information

40G QSFP+ (MPO) to 4x10G SFP+ (8xLC) Assembly

40G QSFP+ (MPO) to 4x10G SFP+ (8xLC) Assembly Product updated on September 19, 2018 40G QSFP+ (MPO) to 4x10G SFP+ (8xLC) Assembly 40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes this feature allow new parallel optics active

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...

More information

KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED

KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED KEEP YOUR FURNITURE AND EQUIPMENT PROTECTED Our transit protection range is perfect for securing items from damage during transit. Check out our economical and easy ways to keep your furniture safe. We

More information

IP Rated, Custom-built & UK Assembled Cabinets

IP Rated, Custom-built & UK Assembled Cabinets Linxcom is a UK Brand offering networking, data and telecommunications end-to-end solutions. We specialize in fibre optic passive and active products and focus on the latest technology to provide our customers

More information

FCategory 5e 110 Wiring

FCategory 5e 110 Wiring 110 Cross Connect System FCategory 5e 110 Wiring Blocks and Accessories Category 5e 110 Field Installable Patch Cord Plugs Category 5e 110 Wiring Block Kits Category 5e 110 Patch Cords 110 Rack and Wall

More information

PureNet Data Communication Products Premises Copper Products

PureNet Data Communication Products Premises Copper Products PureNet Data Communication Products Premises Copper Products PureNetCable.com Table of Contents Premises Copper cables Category 6 550 MHz UTP Cable... 2 Category 6 250 MHz UTP Cable... 4 Category 5e 350

More information

point2point ACCESSORIES CASES

point2point ACCESSORIES CASES point2point ACCESSORIES CASES The cases are available in four options for either desktop use and/or 19 rack mounting, and all variants can accommodate up to 10 Plug-In modules plus the point2point switch

More information

Telecommunication rack systems Harju Elekter Teletehnika

Telecommunication rack systems Harju Elekter Teletehnika Telecommunication rack systems Harju Elekter Teletehnika HARJU ELEKTER TELETEHNIKA AS Harju Elekter Teletehnika designs, manufactures and distributes high quality sheet metal products. We have up to date

More information

Screed Floor system LIMOGES Cedex. Phone : Fax :

Screed Floor system LIMOGES Cedex. Phone : Fax : 87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 CONTENTS PAGES 1.Range 1 to 4 2.Installation process 5 to 10 3.Products details 11 to 24 4.Technical characteristics 25 to 26 1 RANGE. Optional

More information

DataTwist. Cables. DataTwist 600 I-STP - Belden 1888NH. Description

DataTwist. Cables. DataTwist 600 I-STP - Belden 1888NH. Description DataTwist Cables DataTwist 600 I-STP -Belden NH DataTwist 300 I-STP -Belden 66A/970A / Belden 66NH/70NH DataTwist FTP -Belden 730A / Belden 730 NH DataTwist STP -Belden 73A / Belden 73NH DataTwist 5 FTP

More information

Interconnect Cable Simplex and Duplex

Interconnect Cable Simplex and Duplex 10.3 Interconnect Cable Simplex and Duplex Tight Buffer & Plenum Rated Patch panels Workstation equipment connections Horizontal distribution in open office environments Interconnect Cables are designed

More information

Underfloor to desk 231

Underfloor to desk 231 Technical information Underfloor to desk 231 Series 507 Powertrack Series 507 Powertrack is an underfloor busbar system rated at 63Amp maximum. It is available in Standard or CE (Clean Earth) versions.

More information

19 floor rack with steel door

19 floor rack with steel door 2015 Telecommunication rack systems HETEL 1 19 floor rack with steel door Rack width 600 mm Rack width 800mm General features include a metal frame, 19 rails, roof, side and rear panels, door and plinth

More information

Data sheet C6 A modul 6 port 180 M GB3 pearl white

Data sheet C6 A modul 6 port 180 M GB3 pearl white Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification termination unit for mounting in service outlets for underfloor systems suitable for underfloor

More information

Access rack system (ARS)

Access rack system (ARS) Typical arrangement for large traditional Data Centre - ducted fed cooling Access (ARS)... for uncompromised accessibilty A long-established solution, Eaton s B-Line Business Access Rack System (ARS) continues

More information

Data sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/

Data sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/ Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801

More information

Product Bulletin. Be Certain with Belden. Belden DataTwist 1200 Cables

Product Bulletin. Be Certain with Belden. Belden DataTwist 1200 Cables Product Bulletin PB 294 Belden DataTwist 1200 Cables DataTwist 1200 UTP Cables are part of the industry s most powerful Category 5e networking solution: Belden IBDN System 1200. DataTwist 1200 Cables exceed

More information

Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable

Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable Single-Armored Tight Buffered Tight buffered fibers are positioned in a flexible metal tube, which is filled

More information

Mining and Petrochemical Tray-Rated Fiber Optic Cables

Mining and Petrochemical Tray-Rated Fiber Optic Cables Features and Benefits Loose tube construction Stable and highly reliable transmission parameters Waterblocking technology Allows efficient and craft-friendly cable preparation Extra tough double jackets

More information

Speciality racks. Speciality racks... comprehensive solutions

Speciality racks. Speciality racks... comprehensive solutions Speciality racks Speciality racks... comprehensive solutions Eaton's B-Line Business general range of racks are supplemented by a range of speciality racks to allow end users to optimise their infrastructure

More information

IMRAK Freestanding Cabinets

IMRAK Freestanding Cabinets IMRAK 1400 Freestanding Cabinets IMRAK 1400 Freestanding Cabling Rack IMRAK 1400 Freestanding Cabinet CONTENTS Introduction to IMRAK 1400 2 3 Technical specification 4 IMRAK 1400 Ready to use 5 User configurable

More information

Splice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity

Splice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility

More information

AMPLIMITE.050 Series Cable Assemblies, Series III

AMPLIMITE.050 Series Cable Assemblies, Series III Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements

More information

Data sheet E-DAT modul Cat.6 A 8(8) jack, T568A

Data sheet E-DAT modul Cat.6 A 8(8) jack, T568A Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular termination unit Cat.6 A, RJ45 component testing for Cat.6 A to ISO/IEC 11801

More information

Data sheet E-DAT Industry patch cord V6 IP67 - RJ m

Data sheet E-DAT Industry patch cord V6 IP67 - RJ m Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification fully shielded Cat.6 patch cable AWG 26/7 S/FTP with PUR cable sheath 1 x RJ45 and 1 x RJ45-IP67-V6

More information

P R O D U C T C AT A L O G T ALOG

P R O D U C T C AT A L O G T ALOG 2 0 0 2 2002 PRODUCT CATALOG Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized

More information

DNV-GL HH CE RoHS-II conform

DNV-GL HH CE RoHS-II conform Armour: Extremely bending- and torsion-stable aramid braid Armour: Extremely bending- and torsion-stable aramid wrapping Outer jacket: Pressure extruded PUR mixture Fibre: FOC-fibre made out of glass Subcable

More information

Ortronics. Mighty Mo. GX Cabinets. Designed to Perform, Configured to Fit

Ortronics. Mighty Mo. GX Cabinets. Designed to Perform, Configured to Fit Ortronics Mighty Mo GX Cabinets Designed to Perform, Configured to Fit Mighty Mo GX Configured By You, Made By Legrand Ortronics 2 Ortronics (adj.) ef fi cient Performing or functioning in the best possible

More information

ISO Precision Racks Mfg. Co. BUREAU VERITAS Certification. Excluding Design

ISO Precision Racks Mfg. Co. BUREAU VERITAS Certification. Excluding Design ISO 9001 BUREAU VERITAS Certification Excluding Design Precision Racks Mfg. Co. COMPANY PROFILE Precision Racks Manufacturing Company (PRMC) was started in the year 1972 as an ancillary unit to the telecommunication's

More information

Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces

Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................

More information

fiber optic cable Outdoor Cables

fiber optic cable Outdoor Cables fiber optic cable Outdoor Outdoor Cables CST Armored cables for direct-buried applications Product specifications Outdoor Cables OC 1 CST & FRP Armor Applications Ideal for installation where direct-burial

More information

Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6 A, stainless steel

Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6 A, stainless steel Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual "E-DAT modul" modules component

More information

2001 PRODUCT CA T ALOG

2001 PRODUCT CA T ALOG 2001 PRODUCT CATALOG 2001 Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized

More information

Pretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB)

Pretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB) 1. Precautions 2. Carton Contents Pretium Wall-Mountable Housing OR Fiber Zone Box (FZB-02P-JB) PWH-02P and FZB-02B-JP have: (15 inches) edge grommet (1) Laser warning label (2) Fiber identification labels

More information

Basic design adapted to Telcordia GR409-CORE / TIA/EIA 568B.3 / ICEA-S

Basic design adapted to Telcordia GR409-CORE / TIA/EIA 568B.3 / ICEA-S ADDISON Flame Retardant Tight Buffered Distribution Optic cables MTA-B-C-D-Y Tight Buffer Coating Glass Yarn Ripcord(optional) PVC Outer Sheath APPLICATION This cables are used for interconnection of distribution

More information

Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6A, light gray

Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6A, light gray Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 19 inch 1RU module frame with 24 individual "E-DAT modul" modules component testing

More information

19 floor rack with steel door

19 floor rack with steel door 19 floor rack with steel door Rack width 600 mm Rack width 800mm General features include a metal frame, 19 rails, roof, side and rear panels, door and plinth corners. Standard structure includes a lockable

More information

Data sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m

Data sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12-plug to RJ45-plug connection line Cat.6, 8-pole M12-connector, X-coded, straight

More information

PanView iq (PViQ) Fiber Tray

PanView iq (PViQ) Fiber Tray PVQ-FMT PanView iq (PViQ) Fiber Tray Part Number: PVQ-FMT Contents: 1 - FIBER TRAY (HOUSING & DRAWER) 6 - #12-24 x 1/2" SCREWS 6 - M6 x 1.0 x 16 SCREWS 2 - STRAIN RELIEF BRACKETS 2 - #10-32 BLACK HEX NUTS

More information

Hand Tools and Accessories for AMP NETCONNECT

Hand Tools and Accessories for AMP NETCONNECT Hand Tools and Accessories for AMP NETCONNECT Hand Tools and Acessories for AMP NETCONNECT GATD Global Application Tooling Division Corex Coax Stripper For Cables with a Jacket diameter of 2.54 to 7.62

More information

Application Specification. Optical Fiber. Aramid Yarns. 2mm Subunit Jacket. Strength Rods. Outer Jacket

Application Specification. Optical Fiber. Aramid Yarns. 2mm Subunit Jacket. Strength Rods. Outer Jacket Application Specification 402-1012 February 28, 2017 Rev B Fiber Optic Breakout Cables Optical Fiber Aramid Yarns 2mm Subunit Jacket Strength Rods 2 Fiber Cable Outer Jacket 12 Fiber Cable Description:

More information