Personal care robots - Part 1: Physical assistant robots for lumbar support Hypochlorous acid water producing apparatus
|
|
- Duane Chambers
- 5 years ago
- Views:
Transcription
1 Appendix 1 List of Newly Established and Revised JIS Publicly Notified on October 20, 2017 < in and telephone number> (direct line: ) (direct line: ) 1. Newly established standards Name of standard Personal care robots - Part 1: Physical assistant robots for lumbar support Hypochlorous acid water producing apparatus Plain bearings-thin-walled half bearings with or without flange-part 1: Tolerances, design features and methods of test Plain bearings-thin-walled half bearings with or without flange-part 2: Measurement of wall thickness and flange thickness Plain bearings-thin-walled half bearings with or without flange-part 3: Measurement of peripheral length Microscopes-Designation of microscope objectives-part 3: Spectral transmittance that B Japanese Standards B8701 Japanese Standards B The Japan Society of Mechanical Engineers B The Japan Society of Mechanical Engineers B The Japan Society of Mechanical Engineers B Japan Microscope ' in
2 Hydraulic fluid power-determination of pressure ripple levels generated in systems and components-part 1: Method for determining source flow ripple and source impedance of pumps Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 khz with regard to exposure of human beings- Part 1: Requirements for measuring instruments Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 khz with regard to exposure of human beings-part 2: Basic standard for measurements Semiconductor devices-micro-electromechanical devices-part 26: Description and measurement methods for micro trench and needle structures equipment for measurement, control and laboratory use-emc requirements-part 1: General requirements that B The Japan Fluid Power C The institute of Engineers of Japan C The institute of Engineers of Japan C Micromachine Center C Japan Electric Measuring Instruments in
3 equipment for measurement, control and laboratory use-emc requirements-part 2-1: Particular requirements-test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected application equipment for measurement, control and laboratory use-emc requirements-part 2-2: Particular requirements-test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage Safety requirements for power electronic converter systems and equipment-part 1: General Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-part 31: Particular requirements for electrical safety Cable trunking and ducting systems for electrical installations-part 3-1: Metal raceway, Fitting for metal raceway and Box for metal raceway that C Japan Electric Measuring Instruments C Japan Electric Measuring Instruments C The institute of Engineers of Japan C The Institute of Installation Engineers of Japan C The Institute of Installation Engineers of Japan in
4 low-temperature properties-part 1: General introduction and guide low-temperature properties-part 2: Low-temperature brittleness low-temperature properties-part 3: Low temperature stiffening (Gehman test) low-temperature properties-part 4: Low-temperature retraction (TR test) Leather-Physical and mechanical tests-determination of flex resistance-flexometer method Leather-Colour fastness tests-test for colour fastness to rubbing-part 1: Colour fastness to crocking Leather-Colour fastness tests-test for colour fastness to rubbing-part 2: Gakushin method that K The Japan Rubber K The Japan Rubber K The Japan Rubber K The Japan Rubber K Japan Leather and Leather Goods Industries K Japan Leather and Leather Goods Industries K Japan Leather and Leather Goods Industries in
5 Leather-Colour fastness tests- Test for colour fastness to rubbing-part 3: Colour fastness to cycles of to-and-fro rubbing Information technology-process assessment-concepts and terminology Information technology-process assessment-requirements for performing process assessment that K Japan Leather and Leather Goods Industries X33001 Information Processing Society of Japan X33002 Information Processing Society of Japan in (Total standards newly established:26 ) 2. Revised standards Name of standard JIS code that prepared the draft Self-ballasted LED-lamps for general C8156 Japan Lighting lighting services by voltage > 50 V-Safety specifications Cranes-Vocabulary-Part 1: General B Japan Crane Cranes-Vocabulary-Part 2: Mobile B Japan Crane cranes in
6 JIS code that prepared the draft Plain Bearings-Bushes for journal B1582 The Japan bearings Society of Mechanical Engineers Microscopes-Information provided B7256 Japan to the user Microscope ' Functional safety of C Japan Electric electrical/electronic/programmable Measuring electronic safety-related systems-part Instruments 7: Overview of techniques and measures High voltage current-limiting fuses C4604 The Japan ' Synthetic quartz crystal C6704 Quartz Crystal Industry of Japan Safety of laser products-safety of optical fiber communication systems C6803 Optoelectronics Industry and Technology Development Silica glass single-mode optical C6835 Optoelectronics fibers Industry and Technology Development in
7 JIS code that prepared the draft Household and similar electrical C Japan Gas appliances-safety-part 2-102: Appliances Particular requirements for gas, oil Inspection and solid-fuel burning appliances having electrical connections Household and similar electrical C Japan appliances-safety-part 2-82: Amusement Particular requirements for Machine and amusement machines and personal Marketing service machines Iron and steel - Methods for G1217 The Japan Iron determination of chromium content Iron and steel - Methods for determination of niobium content G1237 The Japan Iron Rerolled Steel Bars for Concrete G3117 The Japan Iron Reinforcement High strength steel plates for G3124 The Japan Iron pressure vessel for intermediate and moderate temperature service Stainless steel pipes G3459 The Japan Iron Large diameter welded stainless G3468 The Japan Iron steel pipes Testing methods for industrial K0101 Japan water Environmental Management for Industry in
8 JIS code that prepared the draft Cutting fluid K2241 Japan Metal Working Fluics K6257 The Japan Rubber heat ageing properties in (Total standards revised:21 ) End of the document
Appendix 1 List of Newly Established and Revised JIS Publicly Notified on February 20, 2019
Appendix 1 List of Newly Established and Revised JIS Publicly Notified on February 20, 2019 < in and telephone number> (direct line: 03-3501-9283) (direct line: 03-3501-9287) 1. Newly established standards
More informationOctober Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Circulator SMD 5x5mm* * Dimensions Code JIS Circulator SMD Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU4S0506 C - - Series name A
More informationOctober Isolator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Isolator SMD CU4S0506 Series 5x5mm* * Dimensions Code JIS Isolator SMD Product compatible with RoHS directive Overview of CU4S0506 Series PART NUMBER CONSTRUCTION CU4S0506
More informationOctober Isolator. Drop-in. CU1L2581 Series
R F C o m p o n e n t s October 2015 Isolator Drop-in Isolator Drop-in Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU1L2581 T - - Series name A B Direction CW CCW Center
More informationMedium Voltage. Power Factor Correction Reactive Compensation Harmonic Filters. Electrical Power Quality Management at its best.
Medium Voltage Power Factor Correction Reactive Compensation Harmonic Filters POWER QUALITY Electrical Power Quality Management at its best. From electricity generation, transmission, thru its distribution
More informationIEC TC SC E 22 F G H (UPS) A 77 B C khz 77A JIS C , A B JIS C JIS C 2136 (1/8)
2 15 22 77 85 112 27 11 12 () 1 1 IEC TC SC 2 2 15 15 22 E 22 F G H (UPS) 77 A 77 B C 85 85 112 112 JIS JIS 2 2 22 77A JIS C 61000-4-16, -34 77B JIS C 61000-4-6 112 JIS C 2136 4 16 150 khz 4-34 16 A 4-6
More information2017/SOM3/SCSC/JRAC/010 Agenda Item: 6a
2017/SOM3/SCSC/JRAC/010 Agenda Item: 6a Mutual Recognition Arrangement on Conformity Assessment of Electrical and Electronic Equipment - APEC EEMRA Information Interchange Format Part 1 Thailand Purpose:
More informationNon-Beam Hazard - Electricity
Non-Beam Hazard - Electricity 2013 DOE LSO Workshop - NIST Heath Garrison September 1, 2013 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy,
More informationElectrical Engineering Within a Robotic System
Electrical Engineering Within a Robotic System Carli Hand Fall, 2016 Synopsis The NASA Robotics Mining Competition (RMC) is held every year at Kennedy Space Center, Florida. Fifty universities assemble
More informationSAINT LUCIA NATIONAL STANDARDS
SAINT LUCIA NATIONAL STANDARDS CODE STANDARD Pages Class Hard Copy (ECD) PDF Copy (ECD) *SLNS 1 : 1992 Specification for Margarine & Cooking Margarine *SLNS 2 : 1992 Specification for Shortening 12 B 30
More informationMore Precision. mainsensor Magneto-inductive displacement sensor
More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative
More informationChip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s September 27 Chip beads For power line Large current/low DC resistance type MPZ-H series MPZ5-H type MPZ5-H 5[42 inch]* * Dimensions code JIS[EIA] (2/) REMINDERS FOR USING THESE
More informationA List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment
Appendix B A List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment Note... erence in {} brackets supersede the original references. B.1 INTERNATIONAL ELECTRO-TECHNICAL
More informationLM317L 3-Terminal Adjustable Regulator
3-Terminal Adjustable Regulator General Description The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy to use
More informationPressure transmitter for industrial applications Type MBS 4510
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,
More informationPURE PHYSICS ELECTRICITY & MAGNETISM (PART I)
PURE PHYSICS ELECTRICITY & MAGNETISM (PART I) 1 A student walks across a thick carpet and becomes positively charged as his shoes rub on the carpet. When he touches the metal handle of a door, negative
More informationPressure transmitters for industrial applications Type MBS 4510
Pressure transmitters for industrial applications Type MBS 4510 Technical brochure Features Designed for use in severe industrial environments Enslosure and wetted parts of acid-resistant stainless steel
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11
More informationCORRECT HANDLING OF FLEXIBLE ABRASIVES
L E T T H E S P CONTENTS Page III, IV V - VII CORRECT HANDLING OF FLEXIBLE ABRASIVES OTHER ACTIVITIES 2, 3 GRINDING MACHINES AND STANDARD TYPES OF FLEXIBLE ABRASIVES 4, 5 WHEEL LABEL MARKINGS 6, 7 USE
More informationMore Precision. Draw-wire displacement sensors
More Precision. wiresensor Draw-wire displacement sensors 22 Draw-wire sensors wiresensor MP / MPW analog - Miniature design - Optional IP 67 (MPW) - For fast measurement and harsh environments Model MP
More information(presented by the Commission)
COMMISSION OF THE EUROPEAN COMMUNITIES Brussels, 03.09.1997 COM(97) 438 final 97/0230 (ACC) Proposal for a COUNCIL REGULATION (EC) amending Council Regulation (EEC) No 2658/87 on the tariff and statistical
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationMATERIALS FILTER ELEMENTS SEPARATION CAPACITY CARTRIDGES PRESSURES VALUES
INTRODUCTION FAI FILTRI high quality standards has allowed the production of air/oil separator for air purification into rotary/vane compressors. This has to be considered as a fundamental premise for
More informationGuidance Document. Controlling Quantities of Hazardous Chemicals in Fire Control Zones
Guidance Document Controlling Quantities of Hazardous Chemicals in Fire Control Zones Overview: The EHS department monitors lab activities for type, quantities and proper storage of hazardous materials.
More informationBRONCO PHILATRON. Brand. Premium Flexible Power Cable WIRE AND CABLE * USA MANUFACTURER
BRONCO Brand TM Premium Flexible Power Cable PHILATRON WIRE AND CABLE * USA MANUFACTURER WWW.PHILATRON.COM Table of Contents BRONCO-15 Cable & Cord Description To: Bronco-15 From: Bronco-66 History: To
More informationDeuterium and Tungsten-Halogen Hybrid Light Source. Operation Manual
Deuterium and Tungsten-Halogen Hybrid Light Source - ASBN-D1-WXXX / ASBN-D2-WXXX- Operation Manual Important Safety Notices 1. Never look directly into the light beam, including through the cooling fan
More informationInductive Power Supply (IPS ) for the Transrapid
Inductive Power Supply (IPS ) for the Transrapid M. Bauer, P. Becker & Q. Zheng ThyssenKrupp Transrapid GmbH, Munich, Germany ABSTRACT: At velocities below 100 km/h and during stops the Transrapid vehicle
More informationPROPELLER SHAFT / / PROPELLER SHAFT GENERAL OVERVIEW AND OPERATION PROCESS 1. SPECIFICATION...
3310-01/3310-00/3310-06 GENERAL 1. SPECIFICATION... 3 OVERVIEW AND OPERATION PROCESS 1. OVERVIEW... 2. COMPONENT LOCATOR... 3310-01 FRONT... 3310-06 REAR... 3310-00 DISASSEMBLY AND REASSEMBLY PROPELLER
More informationEMC and Power Quality. Three-phase filters FN FN FN 3025/FN FN FN FN FN FN
15 EMC and Power Quality Three-phase filters FN 258 17 FN 351 20 FN 3025/FN 3026 23 FN 3100 26 FN 3120 29 FN 3258 32 FN 3270 35 FN 3359 38 16 EMC and Power Quality Three-phase filters. EMC filter solutions
More informationINSPECTION TECHNIQUE FOR BWR CORE SPRAY THERMAL SLEEVE WELD
More Info at Open Access Database www.ndt.net/?id=18479 INSPECTION TECHNIQUE FOR BWR CORE SPRAY THERMAL SLEEVE WELD ABSTRACT J.L. Fisher, G. Light, Jim Crane, Albert Parvin, Southwest Research Institute,
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More informationSHP-S/SHP-TS Super SA SHP-TS 70W/CL E27 SLV PRODUCT OVERVIEW DATA TABLE. Optical data
Range Features Patented new construction featuring the Sylvania Wound Ignition Antenna for the ultimate starting reliability throughout lamp life Exclusive frameless construction delivers superior system
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC H H02 COOPERATIVE PATENT CLASSIFICATION ELECTRICITY (NOTE omitted) GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER H02J CIRCUIT ARRANGEMENTS OR SYSTEMS FOR SUPPLYING OR DISTRIBUTING ELECTRIC
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationSSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview
Product Description The MediaSensor (P51) family of bulk micro-machined, absolute, gage and sealed pressure transducers and transmitters are for both harsh and benign media with the superior typical accuracy
More informationGB/T / IEC :2007
Translated English of Chinese Standard: GB/T16935.1-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.120 K 30 GB/T 16935.1-2008 / IEC
More informationModel LIDA. DIRECT DRIVE TUBEAXIAL FANS Model LIDA DIRECT DRIVE TUBEAXIAL FANS SECTION 12. Application. Options/Accessories
IRECT RIVE TUBEAXIAL FANS Model LIA Model LIA IRECT RIVE TUBEAXIAL FANS SECTION 12 Application Carnes Company tubeaxial fans offer one of the widest ranges of sizes, horsepower and performance in the industry.
More informationGyro Markets. New players and business models gives momentum to defence, automotive & consumer applications
Gyro Markets New players and business models gives momentum to defence, automotive & consumer applications 2006 Report name : Gyro Publication date : April 2006 Content Methodology Overview of the MEMS
More informationMechanical Series. Bearing Maintenance CEUs. Industrial Pneumatic Fundamentals CEUs. Industrial Hydraulic Fundamentals - 0.
Mechanical Series All industrial facilities use mechanical equipment in one form or another. Although the types of mechanical equipment can run the gamut from simple open/close valves to ultra complex
More informationFORCE SENSORS FORCE SENSORS
FORCE SENSORS We are a pioneer in the design and manufacture of precision force sensors for applications that require high performance or unique packaging, including electromechanical flight control, test
More informationHigh-Performance Lab Table
Laboratory Tables & TableTop Platforms (continued) 63-500 SERIES High-Performance Lab Table Optional padded armrests 63-541 table is shown with the following accessories: (1) 81-301-02 Front Support Bar,
More informationALSIDENT SYSTEM 50. A small flexible extraction arm
ALSIDENT SYSTEM 50 A small flexible extraction arm Local Exhaust for a cleaner working environment Installation of individual fume extraction systems at the source of the pollutant during the working process
More informationTi300 PRO, Ti400 PRO, Ti450 PRO, Ti450 SF6, Ti480 PRO Thermal Imagers
Ti300 PRO, Ti400 PRO, Ti450 PRO, Ti450 SF6, Ti480 PRO Thermal Imagers Safety Information 2-Year Limited Warranty. See the Users Manual for the full warranty. To register your product, visit www.fluke.com.
More informationChip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s March 217 Chip beads For power line Soft termination KPZ-HR series (for automobiles) KPZ168-HR 168[63 inch]* * Dimensions code JIS[EIA] (2/1) REMINDERS FOR USING THESE PRODUCTS
More informationIFPAC 2003 Dr. Berthold Andres
IFPAC 2003 Dr. Berthold Andres ABB Automation Products Germany Microelectromechanical Systems for Process Analytics Copyright 2002 ABB. All rights reserved. - Process Analyzer and Instrumentation Water
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationh Technical Product Data FW Pressure Pipe Systems
h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or
More informationWire Mesh Safety Grips
Straight Male 90 Male Straight Female L7901 L7915 L7951 Liquid-Tight Grips U* R* Liquid-Tight Grips are woven stainless steel mesh with an anodized aluminum body for corrosion-resistance. They are used
More informationAcoustic Emission Inspection and Monitoring of Petroleum Storage Tanks and Piping
Acoustic Emission Inspection and Monitoring of Petroleum Storage Tanks and Piping Increased Safety with Excellent Money Saving Petroleum tanks used to store crude oil, aviation fuel, gasoline, diesel and
More informationXenon Fiberoptic Lightsource
Xenon Fiberoptic Lightsource Operating Instructions for ASB-XE-175W Lightsource 2659A Pan American Frw N.E Albuquerque, New Mexico 87107 USA (English) Page 1 of 12 TABLE OF CONTENTS PAGE 1. INTRODUCTION
More informationI. INTRODUCTION ENERGY HARVESTER. Fig.1 Type of Energy Harvesters
A Review On: Design Piezoelectrical Energy Harvesting Devices Prof. Sonal Mishra 1, Prof. Rupesh Mundada 2, Mr. Saurabh Patre 3 Mr. Dhanajay Pimpalkar 4 1,2 Department of EXTC J.D.I.E.T Yavatmal, Maharashtra,
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationBattery Technology for Data Centers and Network Rooms: Site Planning
Battery Technology for Data Centers and Network Rooms: Site Planning White Paper # 33 Executive Summary The site requirements and costs for protecting information technology and network environments are
More informationThe IULTCS official methods of analysis for leather
The IULTCS official methods of analysis for leather The IULTCS, through the IULTCS Testing Commissions (IUC, IUF and IUP), provides help and protection for the leather tanning industry worldwide by developing
More informationOverview Replacement Meterbody and Heads for Model STD 110
ST 3000 Smart Transmitter, Release 300 and Smart Field Communicator Model STS03 Transmitter Model STD0 34-ST-99-8 04/03 Addendum (to User s Manual 34-ST-5-4B) Overview Replacement Meterbody and Heads for
More informationASA INTERNATIONAL STANDARDS CATALOG INTERNATIONAL STANDARDS ON ACOUSTICS AND VIBRATIONS
ASA INTERNATIONAL STANDARDS CATALOG 30-2011 INTERNATIONAL STANDARDS ON ACOUSTICS AND VIBRATIONS Introduction The Standards Publication Program of the Acoustical Society of America (ASA) is the responsibility
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,
More information4 Electric Circuits. TAKE A LOOK 2. Identify Below each switch, label the circuit as a closed circuit or an open circuit.
CHAPTER 17 4 Electric Circuits SECTION Introduction to Electricity BEFORE YOU READ After you read this section, you should be able to answer these questions: What are the three main parts of a circuit?
More informationArc Fault Circuit Interrupter (AFCI) FACT SHEET
Arc Fault Circuit Interrupter (AFCI) FACT SHEET THE AFCI The AFCI is an arc fault circuit interrupter. AFCIs are newly-developed electrical devices designed to protect against fires caused by arcing faults
More informationSwitchmode rectifier type RKAS with PFC
Switchmode rectifier type RKAS with PFC RKA Power New technique sine wave input. New principle fully equipped. New technology easy to use. High rate charging fits with all type of stationary batteries.
More informationONTENTS. CONTENTS Page CORRECT HANDLING OF GRINDING WHEELS
C O M E T L E T T H E S P A R K S F L Y ONTENTS CONTENTS Page III, IV V - VII CORRECT HANDLING OF GRINDING WHEELS OTHER ACTIVITIES 2, 3 GRINDING MACHINES AND STANDARD TYPES OF ABRASIVES 4, 5 WHEEL LABEL
More informationICPVT-9. Proceedings. Volume 2. 9th International Conference. Operation, NDE, Failure Analysis, Codes, Standards and Regulations
ICPVT9 Sydney Australia 914 April 2000 Proceedings 9th International Conference on Pressure Vessel Technology Volume 2 Operation, NDE, Failure Analysis, Codes, Standards and Regulations ISBN 0733733530
More informationMarine Solutions. June 20, Author : Siemens Energy & Automation, Thomas Orberger Your Success is Our Goal
Marine Solutions June 20, 2003 Author : Siemens Energy & Automation, Thomas Orberger Your Success is Our Goal System Overview Water Cooling Unit 1 Control Unit 1/2 DUO-Inverter G G CAN System Bus Gateway
More informationACME SCREW LINEAR ACTUATOR. OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor
ACME SCREW LINEAR ACTUATOR ATL 10 AC motor Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore 80 BA depth 17 Stroke end reed switches FCM
More informationInstruction Manual (C):
Instruction Manual (B) STP Series Turbomolecular Pumps STP-A03 Series Pump Specific Information Model name Voltage STP-A03 series 00-40 Va.c. STP pump consists of the three-volumed Instruction Manuals.
More information(CWR11 Style) Overview. Tantalum Surface Mount Capacitors High Reliability T493 Commercial Off-The-Shelf (COTS) MnO 2
T493 Commercial Off-The-Shelf (COTS) MnO 2 Overview The KEMET T493 is designed for the commercial offthe-shelf (COTS) requirements of military and aerospace applications. The T493 is a surface mount product,
More informationPRODUCT/SERVICE CLASSIFICATION CLASS 285 ELECTRICAL EQUIPMENT AND SUPPLIES (EXCEPT CABLE AND WIRE)
Please indicate which products and services your company can supply by checking the appropriate box(es). Check only the first box if your company can supply all of the products and services shown for this
More informationTBE-700. Operation, Safety and Maintenance Manual. Stainless Steel Weld Cleaning System. Ensitech Pty Ltd
Stainless Steel Weld Cleaning System Operation, Safety and Maintenance Manual TBE-700 TBE-700 Instruction Manual Oct 2013 (USA) FOREWORD FOREWORD This manual is a very important tool! Keep it with the
More informationSensors for hybrid power generation system
Sensors for hybrid power generation system Michael Gouzman, Ph.D. 1 Objectives and scope New calls for sensor technologies Sensors for incorporated local generation and battery storage Sensors for renewable
More informationSANWA. Metallic Self - priming Magnet Drive Pumps MEK series. Extensive Hydraulic Performance, Seal-less, Corrosion Resistant, Leak Free
SANWA Line (Europe Edition) Metallic Self - priming Magnet Drive Pumps MEK series Extensive Hydraulic Performance, Seal-less, Corrosion Resistant, Leak Free Catalog No. ISX-E-161-00 MEK Magnetic drive
More informationUSB3.0 for Active Optical Cable
USB3.0 for Active Optical Cable 1. Description 1. Basics: USB3.0 Active Optical Cable (AOC) speed up to 5 Gbps 2. Dimension of USB3.0 Type A male plug conforming requirements (Size: 56.1 x 8 x 16 mm).
More informationDH-2000 Deuterium-Halogen Light Source Installation and Operation Manual
DH-2000 Deuterium-Halogen Light Source Installation and Operation Manual For Products: DH-2000 / DH-2000-BAL / DH-2000-DUV / DH-2000-S / DH-2000-S-DUV / DH-2000-FHS, DH-2000-FHS-DUV /DH-2000-S-DUV-TTL
More informationPresentation of the draft Global Technical Regulation on Safety Belts
Informal Document N 18 (30th GRSP, 3-6 December 2001 Agenda item 1.3.4) November 28 th, 2001 Presentation of the draft Global Technical Regulation on Safety Belts The draft global technical regulation
More informationin hard ferrite K0554 in hard ferrite K0555 in NdFeB K0556 Page 855 Pot magnets K0557 Page 856 Flat pot magnets K0558 Page 857 Button magnets K0559
Magnets 849 Product overview Magnets Round holding magnets (round bar grippers) in AlNiCo with fitting tolerance K0545 Flat gripper with through hole in hard ferrite K0554 Round holding magnets (round
More informationSUBSTATION EQUIPMENT - Page 1 of 8
BATTERY BANKS 1. GENERAL: JEA utilizes a 125 volt DC system for the control and operation of its transmission and distribution substations. JEA has standardized on lead acid type battery banks to supply
More informationPressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
More informationPRODUCT BROCHURE TEL:
PRODUCT BROCHURE TEL: +44-203-6743593 www.aceglogistics.com info@aceglogistics.com BRANDS AND PRODUCTS Ace Global Logistics are world leading suppliers of a whole range of high service and maintenance
More informationElectrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
More informationThe FRACOF Composite Slab Test
The FRACOF Composite Slab Test Experiment, Predictions & Results Anthony Abu & Ian Burgess Fire Resistance Assessment of partially protected COmposite Floors - FRACOF Introduction To increase the use of
More informationInput Current (Amps) Input Power (ANSI Watts)
ICN-2S54-90C-T@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (ANSI Watts) Ballast MAX THD % Power MAX Lamp Current Crest F54T5/HO 1 54-20/-29 0.53
More informationContinued from Part 2 Rules
Continued from Part 2 Rules 26 50. 51 250.94 Grounding (Bonding) of Communications Systems An accessible bonding point must be provided at service equipment or the disconnecting means of separate buildings
More informationGuideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society
Guideline No.: E-07(201712) E-07 TRANSFORMERS Issued date: December 26, 2017 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
More informationUSB3.0 For Active Optical Cable SPECIFICATIONS
USB3.0 For Active Optical Cable SPECIFICATIONS PLUG, STD A USB 3.0 PLUG, STD A USB 3.0 MODEL COMOSS PART NUMBER USB3AOC-A/1-A/1-(X)M-XXX USB3AOC-A/1-AF/1-(X)M-XXX Custom PART NUMBER X PRELIMINARY Ver:
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationTechnical Journal September 2012
Technical Journal September 2012 Earth leakage protection in polluted low voltage network In present day irrespective of the application be it in process industry or in IT industry, Pollution of electrical
More informationHigh sensitivity. Low current load type. type. Short plunger ~ Fine plunger ~ ~ Lever ~ Roller lever ~ Short roller lever ~
6 BZ, BA, BE Series Specifications Standard Basic Switches FEATURES These Switches are Used Extensively and Have Earned the High Respect of Our Customers. Standard basic switches (BZ, BA, BE Series) are
More informationNo shake, rattle, or roll.
No shake, rattle, or roll. Isolator Natural Frequency High Input Specifications Vertical 1.2 Hz Horizontal 1.0 Hz Low Input Specifications Vertical 1.5-2.0 Hz Horizontal 1.2-1.7 Hz Isolation Efficiency
More informationLatest publications September 2013
Latest publications September 2013 'Latest publications' lists the European Standards (EN), CEN Workshop Agreements (CWA), CEN Technical Specifications (CEN/TS) and CEN Technical Reports (CEN/TR) that
More informationMODEL TUB TUBEAXIAL UPBLAST PROPELLER ROOF EXHAUSTER
MODEL TUB MODEL FEATURES Exhaust air up to 60,116 CFM in static pressure applications up to 1 w.g. Straight-through air flow design results in maximum exhaust efficiency Motor and drives are located outside
More informationLucalox PSL. GE Lighting DATASHEET. Lucalox PSL Tubular Clear 230V 250W, 400W, 600W and 750W Lucalox PSL Tubular Clear 400V 600W and 750W
GE Lighting Lucalox PSL Lucalox PSL Tubular Clear 23V 25W, 4W, 6W and 75W Lucalox PSL Tubular Clear 4V 6W and 75W Superb performance and high reliability DATASHEET GE s advanced sodium resistant ceramic
More informationWitold Perkowski, Andrzej Irzycki, Micha Kawalec Borys ukasik, Krzysztof Snopkiewicz
Journal of KONES Powertrain and Transport, Vol. 20, No. 4 2013 MEASUREMENTS OF PRESSURE IN FRONT OF SHOCK WAVE ASSESSMENT OF METHODOLOGY INFLUENCE ON THE MEASUREMENT RESULTS ON THE BASIS OF EXPERIMENTS
More informationFACT SHEET Standard: Electrical Safety
What is a Ground Fault Circuit Interrupter? FACT SHEET The ground-fault circuit interrupter, or GFCI, is a fast-acting circuit breaker designed to shut off electric power in the event of a ground-fault
More informationAbbeon Cal, Inc. Model BD-50E HIGH FREQUENCY GENERATOR OPERATING MANUAL
Abbeon Cal, Inc. Model BD-50E HIGH FREQUENCY GENERATOR OPERATING MANUAL DESCRIPTION. The Model BD-50E is a rugged tester designed for testing tank lining and other applications where extended use is necessary.
More informationADVANCED TRAINING INSTITUTE, HYDERABAD PR04/F01
Revision: 01 LEARNING CONTENT Page 1 of 8 III COURSE CODE MTM-01 COURSE TITLE MACHINE TOOL MAINTENANCE V DURATION 02 Weeks On completion of the course, the learner will be able to understand various test
More informationNamibian Standards Institution (NSI) Standards Development Work Programme. August 2018
(NSI) Development Work Programme August 2018 This is the list of that are in development and those that are published. It will be updated regularly with the next update scheduled for. If you have any question
More informationJBE LED2000 INDUSTRIAL SOLUTIONS FOR LED & INCANDESCENT MAINS LIGHTING FLICKER FREE TRAILING EDGE DIMMER
JBE LED2000 INDUSTRIAL SOLUTIONS FOR LED & INCANDESCENT MAINS LIGHTING FLICKER FREE TRAILING EDGE DIMMER JBE LED Dimming Controller for 110V* & 220V/ 240V AC LED Systems Thank you for purchasing high quality
More informationTrade of Metal Fabrication. Module 1: Basic Fabrication Unit 15: Electricity Phase 2
Trade of Metal Fabrication Module 1: Basic Fabrication Unit 15: Electricity Phase 2 Table of Contents List of Figures... 5 List of Tables... 6 Document Release History... 7 Module 1 Basic Fabrication...
More informationALSIDENT SYSTEM 75. Easily positioned all-round fume extraction arm
ALSIDENT SYSTEM 75 Easily positioned all-round fume extraction arm Local Exhaust for a cleaner working environment Installation of individual fume extraction systems at the source of the pollutant during
More informationC B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More information