Installation Guide Smart-UPS On-Line SRT 2-Post Rack-Mount Rail Kit

Transcription

1 Installation Guide Smart-UPS On-Line SRT 2-Post Rack-Mount Rail Kit Package Contents Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged. All Models 2 pairs of rails 24 pan head screws x24 SRT2200/SRT3000, 2U models SRT5K, 3U models and SRT external battery packs x6 x8 SRT6K, 4U models SRT8K/SRT10K, 6U models x8 x8

2 Install Rails to 2-Post Rack Pem nuts are provided on single side of two rails. Install these rails such that the pem nut is towards the front of the 2-post rack. x6 x6 x6 x6 suo1020a 2 Smart-UPS SRT 2-Post Rack-Mount Rail Kit

3 SRT2200/SRT3000 UPS DAMAGE TO EQUIPMENT OR PERSONNEL CAUTION The equipment is heavy. Each APCRBC152 battery module weighs 16.4 kg (36.2 lbs) and each APCRBC141 battery module weighs 12.5 kg (27.6 lb). Always practice safe lifting techniques adequate for the weight of the equipment. Remove the battery modules before installing the UPS. Use the battery module handle to carefully slide the battery module in or out of the unit. Do not use the battery module handle to lift or carry the battery module. Place the UPS on a table to remove the stabilizer brackets. Always install the UPS at the bottom of the rack. Always install the XLBP below the UPS in the rack. Failure to follow these instructions can result in equipment damage and minor or moderate injury. Tower to rack-mount conversion suo0875b suo0874b suo0873b x3 suo0872b Smart-UPS SRT 2-Post Rack-Mount Rail Kit 3

4 su0845b suo0871b Install the SRT2200/SRT3000 UPS in a rack See Install Rails to 2-Post Rack on page 2 for instructions on rail installation. x3 suo0866b x3 suo1021a suo1022a suo1023a x3 suo1024a suo1025a 4 Smart-UPS SRT 2-Post Rack-Mount Rail Kit

5 suo1026a SRT2200/SRT3000 UPS with one external battery pack suo0838b suo0837b suo0840b suo0839b Smart-UPS SRT 2-Post Rack-Mount Rail Kit 5

6 Disconnect and remove the battery module from the UPS. See Tower to rack-mount conversion on page 3. suo0835b suo0836b suo0834b Install the SRT2200/SRT3000 UPS with one external battery pack in a rack See Install Rails to 2-Post Rack on page 2 for instructions on rail installation. suo0818b suo1027a 6 Smart-UPS SRT 2-Post Rack-Mount Rail Kit

7 suo1028a suo1029a suo1030a x6 suo1031a UPS XLBP suo1032a suo1033a Smart-UPS SRT 2-Post Rack-Mount Rail Kit 7

8 su0852b su0846b su0851b SRT5K/SRT6K UPS DAMAGE TO EQUIPMENT OR PERSONNEL CAUTION The equipment is heavy. Each APCRBC140 battery module weighs 17 kg (37 lb). Always practice safe lifting techniques adequate for the weight of the equipment. Remove the battery modules before installing the UPS. Use the battery module handle to carefully slide the battery module in or out of the unit. Do not use the battery module handle to lift or carry the battery module. Place the UPS on a table to remove the stabilizer brackets. Always install the UPS at the bottom of the rack. Always install the XLBP below the UPS in the rack. Failure to follow these instructions can result in equipment damage and minor or moderate injury. Tower to rack-mount conversion su0849b su0848b su0845b 8 Smart-UPS SRT 2-Post Rack-Mount Rail Kit

9 Install the SRT5K/SRT6K UPS in a rack See Install Rails to 2-Post Rack on page 2 for instructions on rail installation. su0853c suo1034a suo1035a suo1036a suo1037a suo1038a Smart-UPS SRT 2-Post Rack-Mount Rail Kit 9

10 suo1039a SRT5K/SRT6K UPS with one external battery pack su0900b su0898b su0897b 10 Smart-UPS SRT 2-Post Rack-Mount Rail Kit

11 Disconnect and remove the battery module from the UPS. See Tower to rack-mount conversion on page 13. UPS XLBP su0894b su0893b su0892b Install the SRT5K/SRT6K UPS with one external battery pack in a rack The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identical to that described for the SRT5K/SRT6K models. See Install Rails to 2-Post Rack on page 2 for instructions on rail installation. su0919c suo1040a Smart-UPS SRT 2-Post Rack-Mount Rail Kit 11

12 suo1041a suo1042a suo1043a suo1044a UPS XLBP suo1045a suo1046a 12 Smart-UPS SRT 2-Post Rack-Mount Rail Kit

13 SRT8K/SRT10K UPS DAMAGE TO EQUIPMENT OR PERSONNEL CAUTION The equipment is heavy. Each APCRBC140 battery module weighs 17 kg (37 lb). Always practice safe lifting techniques adequate for the weight of the equipment. Remove the battery modules before installing the UPS. Use the battery module handle to carefully slide the battery module in or out of the unit. Do not use the battery module handle to lift or carry the battery module. Place the UPS on a table to remove the stabilizer brackets. Always install the UPS at the bottom of the rack. Always install the XLBP below the UPS in the rack. Failure to follow these instructions can result in equipment damage and minor or moderate injury. Tower to rack-mount conversion suo0784c suo0785b suo0781b suo0783a Smart-UPS SRT 2-Post Rack-Mount Rail Kit 13

14 suo0782b Install the SRT8K/SRT10K UPS in a rack See Install Rails to 2-Post Rack on page 2 for instructions on rail installation. suo0773c suo1047a suo1048a suo1049a suo1050a 14 Smart-UPS SRT 2-Post Rack-Mount Rail Kit

15 suo1051a suo1052a Install the SRT8K/SRT10K UPS with one external battery pack in a rack The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identical to that described for the SRT5K/SRT6K models. Refer to the installation process Install the SRT5K/SRT6K UPS with one external battery pack in a rack on page 11. Smart-UPS SRT 2-Post Rack-Mount Rail Kit 15

16 Customer support and warranty information is available at the APC by Schneider Electric web site, APC by Schneider Electric. APC, the APC logo, and Smart-UPS are owned by Schneider Electric Industries S.A.S. or their affiliated companies. All other trademarks are property of their respective owners. EN A 2/2015