Table of Contents. Chapter 1 Safety Instructions... 1 Chapter 2 Package Contents... 3 Chapter 3 Product Overview... 4

Size: px

Start display at page:

Download "Table of Contents. Chapter 1 Safety Instructions... 1 Chapter 2 Package Contents... 3 Chapter 3 Product Overview... 4"

Bonnie Beverley Fowler
5 years ago
Views:

2 Table of Contents Chapter 1 Safety Instructions... 1 Chapter 2 Package Contents... 3 Chapter 3 Product Overview Dimension Product Overview... 5 Chapter 4 Instruction for installation Park the Charging Cart Connect the Power Cord Install the Machine Position the Charging Cart Use the U-type Lock Chapter 5 Start Using Chapter 6 Indicator Introduction Chapter 7 How to Increase the Storage Space Remove the Partition Chapter 8 Troubleshooting... 14

3 Chapter 1 Safety Instructions WARNING: This cart must only be used for its intended purpose in accordance with these operating instructions. Failure to observe the following notices can result in free, injury death by electric shock or equipment damage. ELECTRIC SHOCK Operate Carefully Inspect power cables carefully before each use. Always turn OFF the power to the product before plugging IN or OUT. Do not unplug by pulling on the cable. Do not unplug the power cord from the outlet when your hands are wet. Do not use cables that are damaged. Do not walk or drive or place objects over the power cable. Do not plug the cable into an extension cable. Keep the door closed and locked when in use. Keep the Cart away from water. Do not place the Cart close to flammable liquids or gases. This product is designed to be used indoors only. This product is not designed to be operated by a child or student. Only Adult operation and supervision is needed at all times. Do not allow anyone to sit, stand, or climb on the product Do not place TV or Monitor or any heavy objects on top of the product.. Do not use the product to store liquids or cleaning supplies. Move / Push the Cart with caution.(do not pull the Cart) Keep the door closed and locked when in use ad when it is unattended. Keep the castors locked when Cart is not in transit. Keep the ventilation holes unblocked for air circulation. Disconnect the power cable from the wall before relocate the mail unit. Cautions when moving the Cart Cautions when parking the Cart Disconnect the power cable from the wall. Make sure the cable is wrapped and secure. Close and lock the doors. Unlock the casters. Move / Push the Cart with caution. Do not move the Cart across rough, uneven or irregular surfaces/floor. Do not park the Cart in areas of heavy traffics. Do not leave Cart in unattended areas where children have access. Keep Cart door closed and locked whenever it is unattended or parked for charging or storage. Keep Cart casters locked whenever it is unattended or parked for charging or storage. 1

4 FCC Warning This Document Camera has been tested and found to comply with the limits for a Class A computer device, pursuant to Article 15-J of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada. Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe A prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par l'industrie. 2

5 Chapter 2 Package Contents Power Cord User Manual Cable Tie User manual 3

6 Chapter 3 Product Overview 3.1 Dimension Power Input Power Output Size (W x D x H) AC 100V-120V,50/60Hz, 12A AC 100V-120V,50/60Hz, 11A 711.8x646.9x1035.6mm 4

other equipment, but not for power strip.

7 3.2 Product Overview Front View A safety lock can be mounted Door handle switch Side View The 3 external power outlets are for use by other equipment, but not for power strip. External AC breaker Main power switch of charging cart Power input Power cable winder U-type lock Anti-winding 5

8 Back View U-type lock Door handle switch Front View of Inside One Touch Charge Storage compartments Slot dimension:15.2" x 10" x 1.3" Quantity of storage compartments: 11 compartments each layer may accommodate up to 33 laptops or tablet PCs 6

9 Back View of Inside Storage compartments. You may use a cable tie to fix the cables not in use AC outlet Overload protection 7

caused by sliding. Press down the switch ON on the anti-winding cover to park the cart. Lock the wheel 4.

10 Chapter 4 Instruction for installation 4.1 Park the Charging Cart Prior to starting the equipment installation and connecting the power cord, please lock the charging cart to avoid danger caused by sliding. Press down the switch ON on the anti-winding cover to park the cart. Lock the wheel 4.2 Connect the Power Cord Connect the power cord to the power input on the right side. 4.3 Install the Machine This product can be used for charging laptops and tablet PCs. The installation method is as follows: Fix the power cord in the cable slot and leave a short section of cord available to connect to the laptop. 8

11 Place the laptop/tablet PC into the storage compartment and connect the power cord to the laptop/tablet PC. Organize the cables Organize the cables to be stored in the back of the charging cart at the location corresponding to the storage compartment used. Put the cable tie through the adjacent 2 holes. Organize the power cord neatly and bundle it into the cable tie. Close the cable tie tightly and cut off the remaining portion of the plastic strip. Always overlap one hole used by adjacent cable ties so that cable ties form a zigzag row. 9

12 4.4 Position the Charging Cart After the equipment installation is completed, release the locked wheels. Move the charging cart to the selected location, and lock the wheels again. Press down the switch OFF on the anti-winding cover to release the lock. Release the lock Lock the wheel 10

13 4.5 Use the U-type Lock The cart has U-type locks for retaining the cart fixedly and the equipment on the panel separately. Chains and anti-theft security locks can be purchased if needed. Side View U-type lock Back View U-type lock 11

Chapter 5 Start Using Place the laptop into the storage compartment and connect with power cord. Turn on the main power. Press the Quick Charge button to start the preset charging schedule.

14 Chapter 5 Start Using Place the laptop into the storage compartment and connect with power cord. Turn on the main power. Press the Quick Charge button to start the preset charging schedule. Preset schedule is 4-hour charging time per layer and a total of 12 hours to complete the charging. Chapter 6 Indicator Introduction 1. PWR: Power indicator. A green indicator means the main power is on and no indicator means the power is off. 2. CH1/CH2/CH3: Charging indicator. A white indicator means the charging is ongoing and no indicator means no charging is ongoing. A blue indicator means the charging is full. 12

15 Chapter 7 How to Increase the Storage Space If the storage compartment is not wide enough, remove some partitions to increase the width. 7.1 Remove the Partition Reach below the layer board, and push the tenon of the partition upward. Then gently pull the partition up to remove it from the cart 13

16 Chapter 8 Troubleshooting No. Problems Solutions 1 Abnormal voltage caused outage of charging cart AC IN / AC OUT are installed with the overload protection and the external AC breaker respectively to automatically turn the power off to protect the machine when the flow of electrical current is abnormal. Press the switch again to restart the power. 14

Rhino Charging Cart CT-C50

Rhino Charging Cart CT-C50 www.mylumens.com Table of Contents Chapter 1 Safety Instructions... 1 Chapter 2 Package Contents... 2 Chapter 3 Product Overview... 3 3.1 Dimension... 3 3.2 Product Overview...