National Certificate in Electricity Supply (Sub Station Maintainer) (Level 4)

Size: px
Start display at page:

Download "National Certificate in Electricity Supply (Sub Station Maintainer) (Level 4)"

Transcription

1 NZQF NQ Ref 1118 Version 2 Page 1 of 7 (Sub Station Maintainer) (Level 4) Level 4 Credits 140 This qualification has been reviewed. The last date to meet the requirements is 31 December Transition Arrangements This qualification has been reviewed and replaced by the New Zealand Certificate in (Substation Maintenance) (Level 4) [Ref: 2969]. The last date for entry into programmes leading to this qualification is 31 December The last date for assessment of this qualification is 31 December 2018, when the qualification will be discontinued. People currently working towards this qualification may either complete the requirements by 31 December 2018, or transfer their results to the replacement qualification. For detailed information see Review Summaries on the NZQA website. NQF Registration Information Process Version Date Last Date for Award Registration 1 September 2004 December 2018 Review 2 August 2015 December 2018 Standard Setting Body Connexis PO Box 2759 Wellington, 6011 Telephone Fax Website qualifications@connexis.org.nz

2 NZQF NQ Ref 1118 Version 2 Page 2 of 7 (Sub Station Maintainer) (Level 4) Level 4 Credits 140 Purpose This national certificate is awarded to people who have demonstrated competence in the skills and knowledge required for employment in the electricity supply industry as a Sub Station Maintainer. It provides entry into the National Diploma in (Level 5) [Ref: 0674]. It caters for trainees within this industry whose primary role is carrying out maintenance activities on the primary plant and equipment installed in high voltage electricity sub stations. Holders of the qualification will be able to: Joint electricity network overhead conductors Carry out in-service visual inspections on sub station equipment and auxiliary plant Carry out routine inspections and servicing of power transformers, distribution power transformers, high voltage minimum and bulk oil circuit breakers, pole mounted recloser circuit breakers, high voltage indoor metal clad circuit breakers and bus Carry out routine inspections and servicing on sub station emergency and security services Install sub station earthing and bonding system Carry out routine service on instrument transformers, and routine inspection and minor servicing on high voltage SF6 outdoor circuit breakers Service and repair high voltage disconnectors, earth switches and bus equipment Apply and remove safety measures in an electricity supply environment Use and maintain test instruments used within the high voltage electrical industry. Carry out insulating oil sampling and voltage breakdown tests. The qualification contains unit standards that build on the knowledge and skills recognised by the (Electrical) (Level 4) [Ref: 0921], National Certificate in (Mechanical Fitter) (Level 4) with strands in Hydro, Networks, and Thermal; and an optional strand in Electrical Services [Ref: 0918], and (Electrical Services Technician) (Level 3) [Ref: 1098]. Special Notes Prerequisite: one of the following (Electrical) (Level 4) [Ref: 0921] (Mechanical Fitter) (Level 4) with strands in Hydro, Networks, and Thermal; and an optional strand in Electrical Services [Ref: 0918]

3 NZQF NQ Ref 1118 Version 2 Page 3 of 7 (Electrical Services Technician) (Level 3) [Ref: 1098] or demonstrate equivalent knowledge and skills. Credit Range Compulsory Elective Level Level Minimum totals Total 140 Requirements for Award of Qualification This qualification will be awarded to people credited with all of the compulsory unit standards listed. Award of NQF Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided in the Qualifications Authority Rules and Procedures publications available at Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (Id). Any version of a standard with the same Id may be used to meet qualification requirements that list the Id and/or that specify the past or current classification of the standard. Detailed Qualification Requirements Compulsory All the unit standards listed below are required. Field Engineering and Technology Subfield Electrical Supply Domain Core Skills Demonstrate the requirements for holding access permits on high voltage electrical lines Demonstrate the requirements for holding permits on high voltage electrical equipment Demonstrate knowledge of single and three phase transformers used in the electricity supply industry Demonstrate knowledge of electrical testing and test instruments in the electricity supply industry Domain Distribution Networks Joint electricity network overhead conductors 3 4

4 NZQF NQ Ref 1118 Version 2 Page 4 of 7 Domain Electricity supply Power System Maintenance Carry out in service visual inspections on Substation equipment 3 4 for safe operation Carry out routine inspection and servicing on distribution power 4 8 transformers 33kV to 11kV Install substation earthing and bonding system Carry out in-service visual inspection checks on substation auxiliary plant and equipment Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V Carry out routine inspection and servicing on transmission power transformers above 33kV Carry out routine service on transmission instrument transformers 33kV and above Service and repair high voltage disconnectors, earth switches and other bus structure equipment Carry out routine inspection and servicing on distribution instrument transformers below 33kV Carry out routine inspection and servicing on high voltage minimum oil circuit breakers Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Carry out routine inspection and servicing on 11kV and 33kV pole mounted re-closer circuit breakers Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Carry out routine inspection and minor servicing on high voltage SF6 outdoor circuit breakers Carry out routine inspection and servicing on substation emergency services Carry out routine inspection and servicing on security services at substations Apply and remove safety measures in an electricity supply environment Domain Power System Management Plan for scheduled work on electricity supply power system equipment 4 10 Domain Testing Use and maintain test instruments used within the high voltage 3 4 electrical industry Carry out insulating oil sampling and voltage breakdown tests

5 NZQF NQ Ref 1118 Version 2 Page 5 of 7 Elective A minimum of 20 credits is required from unit standards at level 3 or above, chosen from any of the following subfields and/or specified unit standards. Domain Power System Maintenance Carry out routine inspection and servicing on high voltage air 4 4 blast circuit breakers Carry out routine inspection and servicing on high voltage gas 4 5 insulated switchgear Carry out routine inspection and servicing on substation air 3 4 compressor systems Carry out routine inspection and service of high voltage capacitor banks and signal injection plant Field Subfield Domain Engineering and Technology Core Skills Power System Management Testing Transition Arrangements Any credit gained for standards previously classified Engineering and Technology>>Electricity Networks can be used to meet the requirements of the Elective. Certification The certificate will display the logos of the Qualifications Authority and the Electricity Supply Industry Training Organisation. Classification This qualification is classified according to the NQF classification system and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 318 Engineering and Technology/ Engineering and Related Technologies/Electrical and Electronic Engineering and Technology/Electrical Fitting, Electrical Mechanics

6 NZQF NQ Ref 1118 Version 2 Page 6 of 7 Quality Management Systems Providers and Industry Training Organisations must be accredited by a recognised Quality Assurance Body before they can register credits from assessment against standards. Accredited providers and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Accreditation requirements and the moderation system are outlined in the associated Accreditation and Moderation Action Plan (AMAP) for each standard.

7 NZQF NQ Ref 1118 Version 2 Page 7 of 7 Pathway Diagram (Level 2) [Ref: 0868] (Electrical) (Level 3) [Ref: 0888] (Mechanical Fitter) (Level 3) with strands in Hydro, Netw orks, and Thermal [Ref: 0891] (Electrical) (Level 4) [Ref: 0921] (Electrical Services Technician) (Level 3) [Ref: 1098] Electricity Supply (Mechanical Fitter) (Level 4) with strands in Hydro, Networks, and Thermal; and an optional strand in Electrical Services [Ref: 0918] Proposed: National Certificate in (Hydro Maintainer) (Level 4) (Sub Station Maintainer) (Level 4) [Ref: 1118] (Field Switcher) (Level 4) [Ref: 1117] Proposed: National Certificate in Electricity Supply (Hydro Maintainer) (Level 5) National Diploma in Electricity Supply (Level 5) [Ref: 0674] National Diploma in Electricity Supply (Level 6) [Ref: 0675]

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 1117 Version 5 Page 1 of 7 National Certificate in Electricity Supply (Field Switcher) (Level 4) with optional strands in Distribution Networks, Transmission Networks, and Operational and Co-ordination

More information

Level 4. Credits 61. Purpose. Replacement Information

Level 4. Credits 61. Purpose. Replacement Information NQF Ref 1314 Version 1 Page 1 of 6 National Certificate in Electricity Supply (Metering Technician) (Level 4) with optional strands in Low Voltage Time of Use, and High Voltage Time of Use Level 4 Credits

More information

National Certificate in Electricity Supply (Line Mechanic Distribution) (Level 4)

National Certificate in Electricity Supply (Line Mechanic Distribution) (Level 4) NZQF NQ Ref 0874 Version 6 Page 1 of 6 National Certificate in Electricity Supply (Line Mechanic Distribution) (Level 4) Level 4 Credits 118 This qualification is expiring. The last date to meet the requirements

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NQF Ref 1389 Version 3 Page 1 of 12 National Certificate in Electricity Supply (Line Mechanic Transmission) (Level 4) with optional strands in Optional Work Skills (E1 (O)), and Optional De-energised Work

More information

National Certificate in Electricity Supply (Distribution Faultman) (Level 4) with strands in Line Mechanic, and Electrician

National Certificate in Electricity Supply (Distribution Faultman) (Level 4) with strands in Line Mechanic, and Electrician NZQF NQ Ref 1624 Version 4 Page 1 of 9 National Certificate in Electricity Supply (Distribution Faultman) (Level 4) with strands in Line Mechanic, and Electrician Level 4 Credits 76-78 This qualification

More information

Credit gained for a standard may be used only once to meet the requirements of this qualification.

Credit gained for a standard may be used only once to meet the requirements of this qualification. NZQF NQ Ref 0796 Version 4 Page 1 of 5 National Certificate in Driving (Light Motor Vehicle) Level 2 Credits 41 Purpose The National Certificate in Driving (Light Motor Vehicle) [Ref: 0796] is designed

More information

National Certificate in Motor Industry (Automotive Servicing)

National Certificate in Motor Industry (Automotive Servicing) NZQF NQ Ref 0138 Version 4 Page 1 of 8 National Certificate in Motor Industry (Automotive Servicing) Level 2 Credits 67-68 This qualification has been reviewed. The last date to meet the requirements is

More information

National Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair

National Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair NZQF NQ Ref 1252 Version 3 Page 1 of 12 National Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair Level 2 Credits 80 This

More information

National Certificate in Motor Industry (Automotive Machining)

National Certificate in Motor Industry (Automotive Machining) NZQF NQ Ref 0371 Version 6 Page 1 of 11 National Certificate in Motor Industry (Automotive Machining) Level 4 Credits 167 This qualification has been reviewed. The last date to meet the requirements is

More information

National Certificate in Passenger Service (Taxi Driver) Level 3. Credits 61. Purpose. Replacement Information. Special Notes

National Certificate in Passenger Service (Taxi Driver) Level 3. Credits 61. Purpose. Replacement Information. Special Notes NZQF NQ Ref 1695 Version 1 Page 1 of 7 National Certificate in Passenger Service (Taxi Driver) Level 3 Credits 61 Purpose This qualification is for people who drive or intend to drive a taxi. The compulsory

More information

Level 5. Credits 85. Purpose. Special Notes

Level 5. Credits 85. Purpose. Special Notes NZQF NQ Ref 0793 Version 4 Page 1 of 11 National Certificate in Driving (Education and Assessment) with optional strands in Light Motor Vehicle, Heavy Motor Vehicle, Motorcycle, and Off-road Vehicle Level

More information

National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans

National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans NZQF NQ Ref 0413 Version 6 Page 1 of 13 National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans Level 4 Credits

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 1445 Version 2 Page 1 of 33 National Certificate in Motor Industry (Automotive Heavy Engineering) (Level 3) with strands in Agricultural Equipment, Materials Handling Equipment, Plant and Equipment,

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 1416 Version 3 Page 1 of 20 National Certificate in Motor Industry (Automotive Specialist Engineering) (Level 4) with strands in Automotive Heating, Ventilation, and Air Conditioning; Automotive

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 1422 Version 2 Page 1 of 25 National Certificate in Motor Industry (Automotive Electrical and Mechanical Engineering) (Level 4) with strands in Electrical and Electronics, Light Vehicle, Motorcycle,

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 1420 Version 2 Page 1 of 33 National Certificate in Motor Industry (Vehicle Servicing) with strands in Brake and Clutch, Exhaust Systems, Radiator Repair, Steering and Suspension, Tyres, Underbody

More information

Demonstrate knowledge of electrical theory for Electrical Service Technician B

Demonstrate knowledge of electrical theory for Electrical Service Technician B Demonstrate knowledge of electrical theory for Electrical Service Technician B 10937 version 4 Page 1 of 5 Level 3 Credits 3 Purpose 'Electrical Service Technician B' (EST B) refers to a class of electrical

More information

NZQF NQ Ref 1421 Version 2 Page 1 of 39

NZQF NQ Ref 1421 Version 2 Page 1 of 39 NZQF NQ Ref 1421 Version 2 Page 1 of 39 National Certificate in Motor Industry (Automotive Electrical and Mechanical Engineering) (Level 3) with strands in Electrical and Electronics, Light Vehicle, Motorcycle,

More information

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines Page 1 of 5 Title Demonstrate and apply knowledge of electrical machines Level 5 Credits 15 Purpose This unit standard covers knowledge and the application of d.c. and a.c. electrical machines for engineers.

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Demonstrate and apply knowledge of theory and practice for registration of electrical workers (stage 3) Level 4 Credits 3 Purpose This unit standard is for people who are completing an

More information

Service and operate an electric main line locomotive

Service and operate an electric main line locomotive Page 1 of 5 Service and operate an electric main line locomotive Level 3 Credits 5 Purpose People credited with this unit standard are able to: ensure electric main line locomotive is fit for purpose and

More information

Service and operate a diesel-electric main line locomotive

Service and operate a diesel-electric main line locomotive Page 1 of 5 Service and operate a diesel-electric main line locomotive Level 3 Credits 5 Purpose People credited with this unit standard are able to: ensure diesel-electric main line locomotive is fit

More information

Diagnose and rectify faults in a motorcycle electronic ignition system

Diagnose and rectify faults in a motorcycle electronic ignition system Page 1 of 5 Diagnose and rectify faults in a motorcycle electronic ignition system Level 4 Credits 4 Purpose This unit standard is for people in the motorcycle and automotive electrical repair industries.

More information

NZQA Expiring unit standard 5441 version 5 Page 1 of 5

NZQA Expiring unit standard 5441 version 5 Page 1 of 5 Page 1 of 5 Title Describe, diagnose, and rectify faults in tractor and agricultural machine final drive assemblies Level 4 Credits 6 Purpose This unit standard is for people in the automotive repair industry.

More information

NZQA registered unit standard version 1 Page 1 of 5. Apply and remove portable earths in an electricity supply system

NZQA registered unit standard version 1 Page 1 of 5. Apply and remove portable earths in an electricity supply system Page 1 of 5 Title Apply and remove portable earths in an electricity supply system Level 4 Credits 7 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing and bonding

More information

Transport by road overweight and overdimension loads that do not require a pilot or overdimension permit

Transport by road overweight and overdimension loads that do not require a pilot or overdimension permit Page 1 of 7 Transport by road overweight and overdimension loads that do not require a pilot or overdimension permit Level 4 Credits 9 Purpose This unit standard is for drivers who transport overweight

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Drive and manoeuvre a steam driven rail vehicle Level 4 Credits 10 Purpose This unit standard covers the knowledge and skills required to drive and manoeuvre steam driven rail vehicles,

More information

AUTOMOTIVE ELECTRICAL AND ELECTRONICS Service an automotive battery

AUTOMOTIVE ELECTRICAL AND ELECTRONICS Service an automotive battery 1 of 5 level: 2 credit: 2 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry This unit standard is for people who wish to

More information

NZQA Expiring unit standard version 2 Page 1 of 7. Check, remove, and refit wheels and tyres from heavy machines or equipment

NZQA Expiring unit standard version 2 Page 1 of 7. Check, remove, and refit wheels and tyres from heavy machines or equipment Page 1 of 7 Title Check, remove, and refit wheels and tyres from heavy machines or equipment Level 4 Credits 10 Purpose This unit standard is for people in the heavy equipment and tyre repair industry.

More information

NZQA unit standard version 8 Page 1 of 5. Apply and remove earths from conductors on electricity supply networks

NZQA unit standard version 8 Page 1 of 5. Apply and remove earths from conductors on electricity supply networks Page 1 of 5 Title Apply and remove earths from conductors on electricity supply networks Level 4 Credits 4 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing

More information

NZQA Expiring unit standard version 2 Page 1 of 5. Perform minor servicing tasks on a petrol fuel system

NZQA Expiring unit standard version 2 Page 1 of 5. Perform minor servicing tasks on a petrol fuel system Page 1 of 5 Title Perform minor servicing tasks on a petrol fuel system Level 2 Credits 2 Purpose This unit standard is for people who wish to enter or are employed in the automotive repair industry. People

More information

NZQA registered unit standard version 1 Page 1 of 6

NZQA registered unit standard version 1 Page 1 of 6 Page 1 of 6 Title Demonstrate knowledge of theory and legislation for registration of electrical appliance servicepersons Level 3 Credits 3 Purpose This unit standard covers the theory assessment required

More information

Carry out a pre-delivery check, rectify defects, and complete the service on a light vehicle

Carry out a pre-delivery check, rectify defects, and complete the service on a light vehicle Page 1 of 5 Carry out a pre-delivery check, rectify defects, and complete the service on a light vehicle Level 3 Credits 3 Purpose This unit standard is for people in the automotive service industries.

More information

Conduct on-road training for motorcycle riders

Conduct on-road training for motorcycle riders Page 1 of 5 Conduct on-road training for motorcycle riders Level 5 Credits 10 Purpose This unit standard is for licensed motorcycle riding instructors who wish to conduct on-road motorcycle training. People

More information

SUBSTATION DESIGN TRAINING

SUBSTATION DESIGN TRAINING 2017 SUBSTATION DESIGN TRAINING ADVANCE ELECTRICAL DESIGN & ENGINEERING INSITUTE (Registered under MSME& An ISO 9001:2008 CERTIFIED) Training Centre: Advance Group of Institutions C-1, Second Floor Near

More information

Demonstrate knowledge of the operation, service checks, fault diagnosis, and repair of carburettors

Demonstrate knowledge of the operation, service checks, fault diagnosis, and repair of carburettors Demonstrate knowledge of the operation, service checks, fault diagnosis, and repair of carburettors 8183 version 4 Page 1 of 5 Level 3 Credits 6 Purpose This theory-based unit standard is for people in

More information

NZQA registered unit standard 9076 version 4 Page 1 of 5

NZQA registered unit standard 9076 version 4 Page 1 of 5 Page 1 of 5 Title Repair vehicle chassis damage Level 4 Credits 10 Purpose This unit standard is for people who work in the collision repair industry. People credited with this unit standard are able to

More information

NZQA Expiring unit standard 3400 version 4 Page 1 of 6. Check a four stroke petrol engine for condition using hand held test equipment

NZQA Expiring unit standard 3400 version 4 Page 1 of 6. Check a four stroke petrol engine for condition using hand held test equipment Page 1 of 6 Title Check a four stroke petrol engine for condition using hand held test equipment Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited

More information

Police Operations: Tachograph Equipment Inspection

Police Operations: Tachograph Equipment Inspection Higher National Unit Specification General information for centres Unit code: F0N9 35 Unit purpose: This Unit is designed to enable candidates to analyse tachograph recording equipment and use the information

More information

Heavy vehicle service and maintenance technician standard: Employer Occupational Brief

Heavy vehicle service and maintenance technician standard: Employer Occupational Brief Heavy vehicle service and maintenance technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering

More information

NZQA unit standard version 4 Page 1 of 5

NZQA unit standard version 4 Page 1 of 5 Page 1 of 5 Title Repair and refit heavy vehicle tyres Level 3 Credits 10 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to

More information

The Learning Outcomes are grouped into the following units:

The Learning Outcomes are grouped into the following units: Component Specification NFQ Level 4 Digital Tachograph Operation Skills 4N2326 1. Component Details Title Teideal as Gaeilge Award Type Code Digital Tachograph Operation Skills Scileanna Oibrithe Tacagraif

More information

Title Electrical Technical Maintenance Coding System. Reference Number PMP 01 (RIC Standard: EP SP)

Title Electrical Technical Maintenance Coding System. Reference Number PMP 01 (RIC Standard: EP SP) Discipline Engineering Standard NSW Category General Title Reference Number PMP 01 (RIC Standard: EP 00 00 00 02 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards and

More information

Model Curriculum. Solar Lighting Technician (Options: Home Lighting System/ Street Lights)

Model Curriculum. Solar Lighting Technician (Options: Home Lighting System/ Street Lights) Model Curriculum Solar Lighting Technician (Options: Home Lighting System/ Street Lights) SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GREEN JOBS RENEWABLE ENERGY ASSEMBLY AND REPAIR SGJ/Q0201,

More information

CONNECTION ASSESSMENT & APPROVAL PROCESS. Cardinal Substation Modification of 115kV Substation

CONNECTION ASSESSMENT & APPROVAL PROCESS. Cardinal Substation Modification of 115kV Substation CONNECTION ASSESSMENT & APPROVAL PROCESS ASSESSMENT SUMMARY Applicant: Project: Cardinal Substation Modification of 115kV Substation CAA ID: 2002 EX071 Long Term Forecasts & Assessments Department\ Consistent

More information

NZQA Expiring unit standard 893 version 5 Page 1 of 5. Diagnose and rectify vehicle emission control system faults

NZQA Expiring unit standard 893 version 5 Page 1 of 5. Diagnose and rectify vehicle emission control system faults Page 1 of 5 Title Diagnose and rectify vehicle emission control system faults Level 4 Credits 3 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit

More information

Substation Maintenance Training

Substation Maintenance Training Substation Maintenance Training Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq Electrical Substation maintenance

More information

MEDIUM VOLTAGE SWITCHGEAR

MEDIUM VOLTAGE SWITCHGEAR MEDIUM VOLTAGE SWITCHGEAR MEDIUM VOLTAGE SWITCHGEAR Easun Reyrolle is a leader in the field of electrical power management and has more than 30 years of domain expertise in providing a wide spectrum of

More information

SPECIALIST DRIVING KNOWLEDGE AND SKILLS Demonstrate knowledge of operating a light four wheel drive (4WD) vehicle in an off-road environment

SPECIALIST DRIVING KNOWLEDGE AND SKILLS Demonstrate knowledge of operating a light four wheel drive (4WD) vehicle in an off-road environment 1 of 6 level: 3 credit: 4 planned review date: May 2008 sub-field: purpose: Driving This unit standard is for people who are driving light 4WD vehicles in. People credited with this unit standard are able

More information

Certificate of Registration

Certificate of Registration Certificate of Registration Awarded to: Company Registration number: 080010093 Achilles Utilities Nordics & Central Europe hereby confirms that is now fully registered as a supplier in Achilles Nordics

More information

NZQA registered unit standard version 4 Page 1 of 5. Demonstrate knowledge of vehicle exhaust systems

NZQA registered unit standard version 4 Page 1 of 5. Demonstrate knowledge of vehicle exhaust systems Page 1 of 5 Title Demonstrate knowledge of vehicle exhaust systems Level 3 Credits 4 Purpose This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People

More information

Automotive Resources 2018

Automotive Resources 2018 EDUCATIONAL SERVICES LTD Driving your career forward Automotive Resources 2018 NZQA accredited and registered provider 7 Te Rapa Road, PO Box 10-2, Hamilton 21 phone 07 89 9828 gateway@fairviews.co.nz

More information

Schedules 1 to 4, Lot B: Extension of the Lessos Substation

Schedules 1 to 4, Lot B: Extension of the Lessos Substation 1.0 LIGHTNING ARRESTORS 1.1 ZNO lightning arrester, 192 kv rated voltage, 10 ka nominal discharge current 2.0 CAPACITIVE VOLTAGE TRANSFORMER ea. 45 2.1 220 kv capacitive voltage transformer 220/ 3 / 0.11/

More information

Automotive Resources 2017

Automotive Resources 2017 EDUCATIONAL SERVICES LTD Driving your career forward Automotive Resources 2017 NZQA accredited and registered provider 473 Te Rapa Road, PO Box 10-244, Hamilton 3241 phone 07 849 9828 fax 07 849 9808 gateway@fairviews.co.nz

More information

Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications

Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in power and automation technologies that enable utility and industry customers

More information

Youth Guarantee Courses 2019 National Certificates at levels 2 and 3

Youth Guarantee Courses 2019 National Certificates at levels 2 and 3 EDUCATIONAL SERVICES LTD Driving your career forward Youth Guarantee Courses 019 National Certificates at levels and 3 Zero fees apply for all Youth Guarantee learners Open to learners 16-19 years Travel

More information

SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED)

SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Issue 3 2012 SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) www.energynetworks.org 2012 Energy Networks

More information

ecognition of Prior Learning (RPL)

ecognition of Prior Learning (RPL) ecognition of Prior Learning (RPL) EVIDENCE GUIDE FOR INSPECT AND LUBRICATE AN AUTOMOTIVE SYSTEM Evidence Guide inspect and lubricate an automotive system Page 1 of 15 National Certificate in Professional

More information

THE ROYAL SOCIETY FOR THE PREVENTION OF ACCIDENTS RoSPA RESPONSE TO THE DRIVING STANDARDS AGENCY CONSULTATION PAPER

THE ROYAL SOCIETY FOR THE PREVENTION OF ACCIDENTS RoSPA RESPONSE TO THE DRIVING STANDARDS AGENCY CONSULTATION PAPER RoSPA RESPONSE TO THE DRIVING STANDARDS AGENCY CONSULTATION PAPER DRIVER CERTIFICATE OF PROFESSIONAL COMPETENCE 8 FEBRUARY 2006 DRIVER CERTIFICATE OF PROFESSIONAL COMPETENCE This is the response of the

More information

Alberta Electric System Operator Needs Identification Document Application. Mowat 2033S Substation

Alberta Electric System Operator Needs Identification Document Application. Mowat 2033S Substation Decision 21781-D01-2016 Alberta Electric System Operator Needs Identification Document Application Facility Applications September 7, 2016 Alberta Utilities Commission Decision 21781-D01-2016: Alberta

More information

Learning Exchange: Prospectus

Learning Exchange: Prospectus Learning Exchange: Prospectus Table of Contents Learnerships... Short Courses... 4 Short Courses Professional Drivers... 10 1 Learnerships 5085 National Certificate: Professional Driving The purpose of

More information

NZQA Expiring unit standard 960 version 5 Page 1 of 5. Diagnose and rectify brake system faults on light vehicles

NZQA Expiring unit standard 960 version 5 Page 1 of 5. Diagnose and rectify brake system faults on light vehicles Page 1 of 5 Title Diagnose and rectify brake system faults on light vehicles Level 4 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit

More information

Medium voltage products UniSec DY800 New 24 kv air-insulated medium voltage switchgear to e-distribuzione specifications

Medium voltage products UniSec DY800 New 24 kv air-insulated medium voltage switchgear to e-distribuzione specifications Medium voltage products UniSec Y800 New 24 kv air-insulated medium voltage switchgear to e-istribuzione specifications UniSec Y800 ubicles available Unit e-istribuzione specifications (Ed. 4) UniSec IS/1

More information

CONTENTS ABOUT TPP TAI POUTINI POLYTECHNIC

CONTENTS ABOUT TPP TAI POUTINI POLYTECHNIC DRIVER EDUCATION 2 CONTENTS About Tai Poutini Polytechnic Programmes Street Talk Defensive Driving Forklift OSH F Endorsement Dangerous Goods Endorsement Heavy Vehicles Fatigue & Logbook Management Class

More information

Higher National Unit Specification. General information for centres. Electrical Motor Drive Systems. Unit code: DN4K 35

Higher National Unit Specification. General information for centres. Electrical Motor Drive Systems. Unit code: DN4K 35 Higher National Unit Specification General information for centres Unit code: DN4K 35 Unit purpose: This Unit has been designed to allow candidates to develop a knowledge and understanding of electrical

More information

15 Nelson-Marlborough Regional Plan

15 Nelson-Marlborough Regional Plan 15 Nelson-Marlborough Regional Plan 15.1 Regional overview 15.2 Nelson-Marlborough transmission system 15.3 Nelson-Marlborough demand 15.4 Nelson-Marlborough generation 15.5 Nelson-Marlborough significant

More information

Unit title: Tractor Operations and Attachments (SCQF level 5)

Unit title: Tractor Operations and Attachments (SCQF level 5) National Unit specification: general information Unit code: H28R 11 Superclass: SK Publication date: August 2012 Source: Scottish Qualifications Authority Version: 01 Summary This Unit develops the knowledge

More information

Key elements of the AS3000 Wiring standards and some of the recent changes.

Key elements of the AS3000 Wiring standards and some of the recent changes. Key elements of the AS3000 Wiring standards and some of the recent changes. Dean of Engineering Steve Mackay Worked for 30 years in Industrial Automation 30 years experience in mining, oil and gas, electrical

More information

Assisted School Travel Program. Eligible Service Provider Request for Increased Run Capacity

Assisted School Travel Program. Eligible Service Provider Request for Increased Run Capacity Version 1.0 Assisted School Travel Program Eligible Service Provider Request for Increased Run Capacity Eligible Service Providers to the Department of Education and Communities Assisted School Travel

More information

Higher National Unit Specification. General information for centres. Electrical Motors and Motor Starting. Unit code: DV9M 34

Higher National Unit Specification. General information for centres. Electrical Motors and Motor Starting. Unit code: DV9M 34 Higher National Unit Specification General information for centres Unit title: Electrical Motors and Motor Starting Unit code: DV9M 34 Unit purpose: This Unit has been developed to provide candidates with

More information

TRANSPOWER PLANS, BUILDS, MAINTAINS AND OPERATES NEW ZEALAND S HIGH VOLTAGE ELECTRICITY TRANSMISSION NETWORK THE NATIONAL GRID.

TRANSPOWER PLANS, BUILDS, MAINTAINS AND OPERATES NEW ZEALAND S HIGH VOLTAGE ELECTRICITY TRANSMISSION NETWORK THE NATIONAL GRID. A GUIDE TO TRANSPOWER 2009 TRANSPOWER PLANS, BUILDS, MAINTAINS AND OPERATES NEW ZEALAND S HIGH VOLTAGE ELECTRICITY TRANSMISSION NETWORK THE NATIONAL GRID. Contents 01 Introduction 02 System Operator 24/7

More information

Electrical Systems and Fault Finding

Electrical Systems and Fault Finding Unit 31: Unit code Electrical Systems and Fault Finding A/615/1500 Unit level 4 Credit value 15 Introduction Electrical systems can be found in a very wide range of locations such as in manufacturing facilities,

More information

Power Products Division. Power Services Service underpins everything we do

Power Products Division. Power Services Service underpins everything we do Power Products Division Power Services Service underpins everything we do Business Overview ABB s Power Services is a support group to all power products and systems business units within ABB. We provide

More information

INESING srl. MOBILE SUBSTATIONS Energy Solution. Energy Innovation. INESING srl Energy Innovation

INESING srl. MOBILE SUBSTATIONS Energy Solution. Energy Innovation. INESING srl Energy Innovation MOBILE SUBSTATIONS Energy Solution INTERNATIONAL FAIR MOBILE SUBSTATIONS ENERGY SOLUTION Complete design for energy s generations, transmission and distribution Mobile Substations Applications of Inesing

More information

56-SDMS-07 REV. 01 SPECIFICATIONS FOR

56-SDMS-07 REV. 01 SPECIFICATIONS FOR 56-SDMS-07 REV. 01 SPECIFICATIONS FOR UNIT SUBSTATIONS UP TO 36 kv ALUMINUM TRANSFORMER ALUMINUM BUS BARS LVDP This specification is property of SEC and subject to change or modification without any notice

More information

SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING

SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company

More information

National Grid UK Electricity Transmission plc. NATIONAL SAFETY INSTRUCTION and Guidance

National Grid UK Electricity Transmission plc. NATIONAL SAFETY INSTRUCTION and Guidance National Grid UK Electricity Transmission plc NATIONAL SAFETY INSTRUCTION and HIGH VOLTAGE METAL CLAD SWITCHGEAR WITH SPOUTS Copyright National Grid plc 2014, all rights reserved. No part of this publication

More information

Power IT MV Live Tank Vacuum Circuit Breaker Model VBF

Power IT MV Live Tank Vacuum Circuit Breaker Model VBF Power IT MV Live Tank Vacuum Circuit Breaker Model VBF ABB - a global leader in power and automation technologies ABB (www.abb.com) is a global leader in power and automation technologies that enable utility

More information

LIST OF EDD DESCRIPTION/ SPECIFICATION AS 19 TH OCTOBER 2016

LIST OF EDD DESCRIPTION/ SPECIFICATION AS 19 TH OCTOBER 2016 No Description/ Specification Amendment 1 EDD 1 :2008 11/0.415 kv Distribution Transformer, Oil Filled - 2 ED 2 :1987 The Galvanization of Iron and Steel, Articles Other Than Steel Wire - 3 ED 3 :1979

More information

The Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory

The Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory Deutsche GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral Agreements of EA, ILAC and IAF for Mutual Recognition

More information

TEMPERATURE RISE TESTS

TEMPERATURE RISE TESTS CP No.: CP0511 Rev. 01 Page: 1 of 6 CERTIFIED TEST REPORT TEMPERATURE RISE TESTS Type CMU Power Fuses REV. 01 DATE: August 12, 2005 ORIGINAL REPORT DATE: May 25, 2005 Cooper Power Systems, Inc. CP No.:

More information

Guidelines for Safety Structure Homologation / Approval

Guidelines for Safety Structure Homologation / Approval TECHNICAL DEPARTMENT MotorSport New Zealand Inc MotorSport House 69 Hutt Road, Thorndon Wellington 6015 PO Box 3793, Wellington 6014 Phone: 04-815-8015 Fax: 04-472-9559 Email: technical@motorsport.org.nz

More information

Final Draft Report. Assessment Summary. Hydro One Networks Inc. Longlac TS: Refurbish 115/44 kv, 25/33/ General Description

Final Draft Report. Assessment Summary. Hydro One Networks Inc. Longlac TS: Refurbish 115/44 kv, 25/33/ General Description Final Draft Report Assessment Summary Hydro One Networks Inc. : Refurbish 115/44 kv, 25/33/42 MVA DESN Station CAA ID Number: 2007-EX360 1.0 General Description Hydro One is proposing to replace the existing

More information

E.V.READY Specification for Installer Training Content

E.V.READY Specification for Installer Training Content E.V.READY Specification for Installer Training Content Document: TISN E.V.Ready 1.4D Ed 1.0 of 13/09/2016 Page: 2/2 Contents 1. Change tracking... 3 2. Background and purpose... 4 3. Training course structure...

More information

FUNDAMENTALS OF POWER DISTRIBUTION SAIEE-1337-V : 2 CPD credits : Category 1

FUNDAMENTALS OF POWER DISTRIBUTION SAIEE-1337-V : 2 CPD credits : Category 1 THE SOUTH AFRICAN INSTITUTE OF ELECTRICAL ENGINEERS FUNDAMENTALS OF POWER DISTRIBUTION SAIEE-1337-V : 2 CPD credits : Category 1 OVERVIEW : 1. Introduction to Distribution, Transmission and Generation

More information

Thank you for the detailed information regarding the Refurbishment Project at Marchwood MTS. This project will facilitate equipment maintainability.

Thank you for the detailed information regarding the Refurbishment Project at Marchwood MTS. This project will facilitate equipment maintainability. November 30, 2007 Mr. Ed Donkersteeg Hydro Ottawa Ltd. 1970 Merivale Road Nepean Ontario K2G 6Y9 Dear Mr. Donkersteeg, Marchwood MTS Refurbishment Project Notification of Conditional Approval of Connection

More information

Substation Committee K2 TF1 of the GIS Subcommittee GIS/GIL/SF 6 -Tutorials

Substation Committee K2 TF1 of the GIS Subcommittee GIS/GIL/SF 6 -Tutorials IEEE/PES Substation Committee - Subcommittee IEEE Substation Committee K2 TF1 of the Subcommittee /GIL/SF 6 -Tutorials -1- IEEE/PES Substation Committee - Subcommittee IEEE Gas Insulated Switchgear ()

More information

The Energy Queensland Group Notice of no non-network options

The Energy Queensland Group Notice of no non-network options The Energy Queensland Group Notice of no non-network options 24 September 2018 MCE Mount Crosby East Establish new substation to replace Mount Crosby Substation (SSMTC) Page 1 of 1 DISCLAIMER While care

More information

Gas Insulated Metal-clad Switchgear, HMGS!

Gas Insulated Metal-clad Switchgear, HMGS! Medium Voltage HMGS-G10 HYUNDAI Medium Voltage Gas Insulated Metal-clad Switchgear, HMGS! SF6 Gas Insulated Metal-clad Switchgear is an integrated assembly of vacuum circuit breaker, 3-position switch,

More information

Entry 2 Skills for Working Life ( )

Entry 2 Skills for Working Life ( ) Entry 2 Skills for Working Life (4807-02) July 2014 Version 1.0 www.cityandguilds.com July 2014 Version 1.0 Assessment recording documents for Vehicle Maintenance (Units 249-253) City & Guilds Believe

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of

More information

UBC Technical Guidelines Section Edition Commissioning of Electrical Systems Page 1 of 5

UBC Technical Guidelines Section Edition Commissioning of Electrical Systems Page 1 of 5 Page 1 of 5 1.0 GENERAL 1.1 Coordination Requirements.1 UBC Building Operations Electrical Technical Support.2 UBC Energy & Water Services 2.0 REQUIREMENTS FOR COMMISSIONING AND TESTING 2.1 Testing.1 Unit

More information

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT An ISO 9001 Company Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli 620014, TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT ENQUIRY NOTICE INVITING TENDER Phone:

More information

Bus and coach engineering technician standard: Employer Occupational Brief

Bus and coach engineering technician standard: Employer Occupational Brief Bus and coach engineering technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering technician

More information

Switchgear and Distribution Systems for Engineers and Technicians

Switchgear and Distribution Systems for Engineers and Technicians Switchgear and Distribution Systems for Engineers and Technicians WHAT YOU WILL LEARN: How to identify typical characteristics of an industrial distribution system Become familiar with the main components

More information

School of Electrical and Information Engineering. ELEC High Voltage. University of Sydney. Dr Keith Mitchell. Engineering

School of Electrical and Information Engineering. ELEC High Voltage. University of Sydney. Dr Keith Mitchell. Engineering University of Sydney School of Electrical and Information Engineering Dr Keith Mitchell ELEC 5205 - High Voltage Engineering ELEC 5205 - High Voltage Engineering 3. Switchgear Types of Power System Switchgear

More information

IB PowlVac ITE-HK Remote Racking Device

IB PowlVac ITE-HK Remote Racking Device IB-51802 PowlVac ITE-HK Remote Racking Device for use with ITE-HK 5kV & 15kV Circuit Breakers and PowlVac ITE-HK 5kV & 15kV Replacement Circuit Breakers Powered by Safety PowlVac ITE-HK Remote Racking

More information

Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( )

Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( ) Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 (2382-18) March 2018 Version 1.0 FAQs 1 18 th Edition IET Wiring Regulations 2018 FAQs When will the 18 th Edition of BS 7671

More information

Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Principles (QCF)

Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Principles (QCF) Specification Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Principles (QCF) Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Competence (QCF)

More information

WELLINGTON, NEW ZEALAND. PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998

WELLINGTON, NEW ZEALAND. PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998 WELLINGTON, NEW ZEALAND PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998 I, Gerry Brownlee, Minister of Transport, HEREBY make the following ordinary Rule: Land Transport

More information