10 mm free passage. Submersible drainage pumps US Application. Safe to run dry. Easy to maintain with guide rail system. 10 mm free passage
|
|
- Pamela Lee
- 5 years ago
- Views:
Transcription
1 Submersible drainage pumps US mm free passage Application The submersible drainage pumps US 6-5 can be used wherever sewage water with solids up to 0 mm particle size occurs, e.g. in collection sumps for ground water, or in permanent draining systems for clean water, or handling solids in suspension. They are also ideal for pumping the sewage water from collection sumps into which dishwashers or washing machines are discharging. For high temperature hot water in the commercial and industrial field we would recommend the use of our US 73 and 03 HE/HES. This range of pumps is suitable for stationary and portable use. For easy removal of the pumps from deep sumps we recommend the use of our guide rail systems which provide ease of maintenance and inspection. For automatic monitoring of the oil chamber a seal leak control can be connected. Cable length is 0 m. The 3-phase pumps with built-in level control (US 5, US 5 and US 5) have a CEE-plug with phase inverter. The sump pumps are tested by the German Institute for Construction Engineering and correspond to the valid construction and test principles. Pumps must not be used for pumping sewage from domestic toilets and urinals. US 5 D US 6 ES The minimum flow velocity in the pressure piping must be 0,7 m/s according to EN 056. This data is represented in the performance curve as a limit of application. Safe to run dry Easy to maintain with guide rail system 0 mm free passage Controllable oil chamber SiC mechanical seal independent of rotation direction Moisture sealed cable inlet We reserve the right to change specifications without notice. Pump performance is subject to ISO 9906 tolerances. D 7-.E-0705 V
2 Submersible drainage pumps US 6-5 Type Height x Width x Depth Discharge Free Cable Cable Cable Weight Code No branch passage quality with plug without HO7RN-F- plug Pumps without level control US 06 E 380 x 90 x 0 mm / 0 mm 3G,0 0 m,5 kg 098 US 06 D 380 x 90 x 0 mm / 0 mm 4G,0 0 m,0 kg 098 US 0 E 40 x 90 x 0 mm / 0 mm 3G,0 0 m 4,5 kg 0978 US 0 D 40 x 90 x 0 mm / 0 mm 4G,0 0 m 5,0 kg 004 US 5 E 435 x 90 x 0 mm / 0 mm 3G,0 0 m 7,0 kg US 5 D 435 x 90 x 0 mm / 0 mm 4G,0 0 m 8,0 kg Pumps with built-in level control US 06 ES 380 x 5 x 35 mm / 0 mm 3G,0 0 m,5 kg 0984 US 06 DS 380 x 5 x 35 mm / 0 mm 4G,0 0 m,0 kg 0985 US 0 ES 40 x 5 x 35 mm / 0 mm 3G,0 0 m 4,5 kg 0979 US 0 DS 40 x 5 x 35 mm / 0 mm 4G,0 0 m 5,0 kg 008 US 5 ES 435 x 5 x 35 mm / 0 mm 3G,0 0 m 7,0 kg US 5 DS 435 x 5 x 35 mm / 0 mm 4G,0 0 m 8,0 kg Pumps without level control US 5 E 360 x 0 x 30 mm 0 mm 4G,0 0 m 7,0 kg 0930 US 5 D 360 x 0 x 30 mm 0 mm 6G,5 0 m 7,5 kg US 5 D 360 x 0 x 30 mm 0 mm 6G,5 0 m 7,5 kg 0930 Pumps with built-in level control US 5 ES 360 x 0 x 30 mm 0 mm 4G,0 0 m 9,0 kg 094 US 5 DS* 360 x 0 x 30 mm 0 mm 6G,5 0 m 9,5 kg 0943 US 5 DS* 360 x 0 x 30 mm 0 mm 6G,5 0 m 9,5 kg 0945 * CEE-Motorprotection with phase inverter Performance Type Delivery head H [m] US 06 E/ES Flow rate Q [m 3 /h] US 06 D/DS US 0 E/ES/D/DS US 5 E/ES US 5 D/DS US 5 E/ES/D/DS US 5 D/DS Electrical data Type Type of Voltage Motor rating kw RPM F.L.C. Motorprotection Plug current Volt P P min - Amp. US 06 E/ES -phase /N/PE~30 0,83 0, ,9 in motor safety US 06 D/DS 3-phase 3/PE~400 0,85 0,60 800,4 in motor CEE- US 0 E/ES -phase /N/PE~30,37 0, ,0 in motor safety US 0 D/DS 3-phase 3/PE~400,36,06 740,4 in motor CEE- US 5 E -phase /N/PE~30,60, 84 7,5 in motor* US 5 ES -phase /N/PE~30,60, 84 7,5 in motor and plug safety US 5 D 3-phase 3/PE~400,70,4 85 3, in motor* US 5 DS 3-phase 3/PE~400,70,4 85 3, in motor and plug CEE- US 5 E -phase /N/PE~30,68,9 8 7,6 external US 5 ES -phase /N/PE~30,68,9 8 7,6 integrated safety US 5 D 3-phase 3/N/PE~400,60, ,0 externnal US 5 DS 3-phase 3/N/PE~400,60, ,0 integrated CEE- US 5 D 3-phase 3/N/PE~400,60, ,4 external US 5 DS 3-phase 3/N/PE~400,60, ,4 integrated CEE- * Additional requirements, see technical data
3 Dimensions (mm) US 6, US 0, US 5 Dimensions (mm) US 5 and US Dimensions (mm) US 6, US 0 and US 5 with GR 40 Dimensions (mm) US 5 and US 5 with GR
4 Accessories Code No E ES D DS E H B D Swing-type check valve / (DN 40), PN / 0037 EN (DN 50), PN Ball check valve (DN 50), PN EN Elbow ball check valve / (DN 40), PN 6, DIN EN Duplex swing-type check valve / (DN 40), PN / 0955 for double pump station, EN H B D Stop valve / (DN 40), PN 6 5 max. 60 / 837 (DN 50), PN 6 40 max Elastic connection H D / (DN 40), PN (DN 50), PN Hose band clamp / ND B BD Cover plate* c/w frame, seal and pipe conduct LW Blind plate* c/w frame and seal LW Elbow 90 / 7894 Elbow Alarm system with submersible ball contact switch with 3 m cable, 673 separate, mainsdependent, with potential free contact Alarm system ditto. with 9,5 m cable 4434 Alarm system for washing-machines AW 3 with submersible ball contact 5090 switch with 3 m cable, separate, mainsdependent Alarm system for washing-machines AW 0 ditto, with 9,5 m cable 509 Separate level controls for single unit NE (-phase) with sub. ball contact switch 3,0 m 670 NE (-phase) with sub. ball contact switch 9,5 m 67 ND (3-phase) with sub. ball contact switch 3,0 m 67 ND 3 (3-phase) with sub. ball contact switch 9,5 m 67 NE A (-phase) with sub. ball contact switch 3,0 m and alarm system 674 NE A (-phase) with sub. ball contact switch 9,5 m and alarm system 675 ND A (3-phase) with sub. ball contact switch 3,0 m and alarm system 676 ND 3A (3-phase) with sub. ball contact switch 9,5 m and alarm system 677 Counterweight ( piece) 754 Duplex control unit BD 00 E (-phase) 0048 BD 00 EC (-phase) 5709 BD 00 (3-phase) 0099 BD 5 (3-phase) 0030 BD 46 (3-phase) 4358 Subm. switch pack B with 3 level switches, 9,5 m and fixing devices 675 Subm. switch pack BmG with 3 level switches, with 9,5 m 676 and counterweight Safety motor protection plug 30V (without level control) 4064 Motor protection plug 8A, 30 (without level control) Motor protection plug,5-4a, 400 V (without level control) CEE motor protection plug 400V (without level control),6 3,7 A 6 3,7 5,5 A 66 Rechargeable battery for off the line operation of the alarm system 0756 Seal leak control DKG 005 Special float for low switching points 744 Switching points US 6 ON/OFF US 0 ON/OFF without GR 55/05 mm 85/5 mm with GR 80/0 mm 0/60 mm Chain with rings DIN 766,,5 m, 30 kg 989 Chain stainless steel with 5 rings,shackle NG 0, DIN 766,,5 m, 00 kg 3986 Shackle A 0,6 40 Guide rail system GR Guide rail system GR * only for single units only in connection with an additional motor protection plug
5 ES D DS E ES D DS E ES D DS D DS Single pump installation with GR US sump area withgr 40 min. 40 x 60cm US sump area without GR min. 40 x 40 cm (without illustr.) US5+5sump area withgr 50 min. 40 x 70cm (without illustr.) US5+5sump area without GR min. 40 x 50cm (without illustr.) When using a cover plate a ventilation facility must be provided In case of installation beneath the backpressure level the pressure tube must be taken in a loop over the local backup level acc. to EN 056. Besides, it must be secured with a EN proofed swing-type check valve. Additionally we recommend an alarm system. Duplex pump installation US sump area without GR min. 40x 60 cm US sump area with GR 40 min. 60 x 60 cm (without illustr.) US 5+5 sump area without GR min. 50 x 70 cm (without illustr.) US 5+5 sump area with GR 50 min. 70 x 70 cm (without illustr.) Suspend control unit in a dry room
6 Technical data Pump Vertical, single-stage, submersible, open centrifugal impeller with 0 mm free passage. US 6, US 0 and US 5: volute casing with horizontal dis-charge branch female thread. US 5 and US 5: spiral housing with horizontal discharge branch female thread. Bearings Common shaft for pump and motor, arranged in ball bearings, deep groove ball bearing with grease chamber, (US 5 and 5 angular inclined ball bearing). Seal Silicon carbide mechanical seal, oil chamber and duplex rotary shaft seal towards the motor section, safe to run dry, a seal leak control can be connected. Motor Submersible, motor type of enclosure IP 68, insulation class B or F (US 5 and US 5), winding thermostat protects the motor from overload, starting via plug, automatically via mounted circuit or submersible ball contact switches. US 5 To protect the motor, a correct adjusted motor protecting switch has to be provided in the control unit at site by the customer. Materials Volute casing or spiral housing made of GG grey cast iron, power supply through rubber insulated flexible cable. US 6, US 0 and US 5: terminal board lid, open centrifugal impeller, wear plate and foot strainer made of GRP, motor casing and shaft from stainless steel. US 5 and US 5: motor casing, circular casing and cable inlet made of GG grey cast iron, open centrifugal impeller and foot strainer made of GRP, rubbercoated wear plate shaft made of C 45 steel encapsulated. Installation Pump can be installed free standing or in connection with guide rail system GR 40 or GR 50. Supply Pump acc. to EN 050 ready for connection with 0 m cable. US 6 and US 0 with safety plug (-phase) or CEE-Plug (3-phase). US 5, US 5 and 5: Pumps without level control with free lead end. Pump with built-in level control with CEE-Plug and phase inverter (3-phase) or safety-plug (- phase). JUNG PUMPEN GmbH Industriestr. 4-6 D Steinhagen Phone x Fax x
JUNG PUMPEN US SUBMERSIBLE DRAINAGE PUMPS
APPLICATION The centrifugal submersible drainage pumps US 62-251 can be used wherever sewage water with solids up to 10 mm particle size occurs, e.g. in collecting sumps for ground water, or in permanent
More informationjung pumpen CATALOGUE RESIDENTIAL TECHNOLOGY RELEASE 20
jung pumpen CATALOGUE RELEASE 20 RESIDENTIAL TECHNOLOGY JUNG PUMPEN, STEINHAGEN (GERMANY) Certified in accordance with ISO 9001 THE FORUM Straightforwardness und classical stylistic idiom with openness
More informationJUNG PUMPEN MULTICUT SEWAGE PUMPS
APPLICATION Centrifugal submersible sewage pumps fitted with the MultiCut cutting system are used as stationary appliances for backpressure protection of detached houses. They are suitable for pumping
More informationJUNG PUMPEN COMPLI 1500 / 2500 SEWAGE LIFTING STATIONS
APPLICATION The compli 1500 and 2500 tank systems have been designed for large industrial and communal wastewater volumes as well as for the connection of streets or other community effluent systems. In
More informationJUNG PUMPEN COMPLI 100 MC SEWAGE LIFTING STATIONS
APPLICATION The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationJUNG PUMPEN compli 100 MC Sewage lifting stations
Application The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationInstruction Manual. Sewage lifting station compli 300
Instruction Manual Sewage lifting station compli 300 Safety instructions Areas of application Electrical connection Installation Servicing Technical data Appendix JUNG PUMPEN GmbH Industriestr. 4-6 33803
More informationGrey Water and Condensate Pump. Rotex. Type Series Booklet
Rotex Type Series Booklet Legal information/copyright Type Series Booklet Rotex Original operating manual All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationDP A.2.50B. Grundfos pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET DP10.65.26.A.2.50B Grundfos pump 96106544 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/dpfam/96106544/dp10-65-26-a-2-50b.html
More informationPoly-sump PKS-B 800 for submersible sewage pumps With plastic valves and guide rail. Application. Description
PKS-B 800 for submersible sewage pumps With plastic valves and guide rail Application The buoyancy proof sump is supplied as a complete prefabricated pump station for use with pressure drainage systems
More informationABS submersible sewage pump AFP
BS submersible sewage pump FP - Robust, reliable submersible pumps from. to kw for pumping wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance
More informationSeries description: Wilo-Drain STS 40
Series description: Wilo-Drain STS H/m 12 Wilo-Drain STS 1 8 6 2 2 6 8 1 12 1 16 Q/m³/h Design Submersible sewage pump Application Pumping of heavily contaminated fluids for: Domestic and site drainage
More informationSE M.C.N.51D
GRUNDFOS DATA BOOKLET SE1.110.200.200.4.52M.C.N.51D Grundfos pump 98179813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/seslfam/98179813/se1-110-200-200-4-52m-c-n-51d.html
More informationDesign details Design. Installation types. Shaft seal. Impeller type. Drive. Bearings
ma-porter ode Description Starting aid 1) Without start capacitor With start capacitor 5 Size 5 DN 6 DN 65 01 Impeller size SE Motor version SE Single-phase motor with float switch NE Single-phase motor
More informationSewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
More informationLITERS PER MINUTE GALLONS PER MINUTE
TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications D3684LSG, D3684LSGX Omnivore 2HP Duplex Grinder Packages LITERS PER MINUTE 200 190 180 170 160 150 140 130 0 50 100 150 200 LSGX - TWO STAGE
More informationSL B. Grundfos pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET SL1.50.65.09.2.50B Grundfos pump 96106566 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sl1000/96106566/sl1-50-65-09-2-50b.html
More informationHOMA Product Range. Electric Submersible Sewage Pumps Ranges K, KX. The source for world wide pump technology. Discharge Size DN 200 up to DN 400
The source for world wide pump technology HOMA Product Range Electric Submersible Sewage Pumps Ranges K, KX Submersible drainage pumps Contractor pumps Drainage pumps for emergency application Deepwell
More informationPump Specifications. D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND
Pump Specifications D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND 200 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 60 190 180 170 160 LSGX - TWO STAGE 50 150 140 130 40 FT. OF HEAD
More informationPump Specifications. Omnivore 2HP Submersible Grinder Pumps LSG200-SERIES (SINGLE STAGE) LSGX200-SERIES (TWO STAGE)
Pump Specifications LSG200-SERIES (SINGLE STAGE) LSGX200-SERIES (TWO STAGE) Omnivore 2HP Submersible Grinder Pumps LSG200_P1 R9/30/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications
More informationVX-ST VORTEX. Submersible pumps in stainless steel. PERFORMANCE RANGE Flow rate up to 650 l/min (39 m³/h) Head up to 15 m
VX-ST Submersible pumps in stainless steel VORTEX Sewage water Domestic use Civil use Industrial use PERFORMANCE RANGE Flow rate up to 60 l/min (9 m³/h) Head up to m APPLICATION LIMITS m maximum immersion
More informationPump Specifications LE100-Series 1HP Submersible Sewage Pump
Pump Specifications LE100-Series 1HP Submersible Sewage Pump LE100-P1 R8/5/2014 Copyright 2014 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE100-Series Dimensional
More informationMODEL Kg H x W x L mm LM/HM kw CODE PRICE
JST SEWAGE PUMPS 41v 3-PHASE VERSIONS VORTEX IMPELLER JST-4 2" 1.4 41 x 14 x 21 24/8.4 12-698 JST-8 3" 29.4 47 x 17 x 34 /9.7 12-768 JST-1 3" 36.6 1 x 17 x 39 7/1 1. 12-774 JST-22 3" 2 POLE 2.2 8 x 21
More informationSEV D. Grundfos Pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET SEV.6.6...1D Grundfos Pump 96779 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sev/96779/sev-6-6---1d.html
More information50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.
Performance curves 50 Hz [m] 11,6 data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s Head Tolerances acc. ISO 9906 Annex A 11,2 10,8 10,4 10 9,6 9,2 8,8 8,4 8 7,6 7,2 6,8 6,4 6 5,6
More informationSealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN / ISO 2858 Type NMWR / NMWB / NMW. our. contribution for
Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN 22858 / ISO 2858 Type NMWR / NMWB / NMW our contribution for environmental protection General DICKOW pumps of series NMWR / NMWB / NMW
More informationNOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump.
Pump Specifications LEH100-Series 1HP Submersible Sewage Pump NOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump. LEH100-P1 R12/19/2012
More informationSeries description: Wilo-Drain MTC
H/m Series description: Wilo-Drain MTC Wilo-Drain MTC 50 40 30 20 10 0 Design Submersible sewage pump with external macerator for intermittent and permanent operation, made of grey cast iron for stationary
More informationPump Specifications FL150 Series Submersible Effluent Pump
Pump Specifications FL150 Series Submersible Effluent Pump FL150_P1 R3/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. FL150-Series Dimensional
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationDrainage pumps Series KEP
Series information KEP_0_EN Drainage pumps - Overview of products - Executions - Materials - Sectional and dimensional drawings General description Drainage pumps series KEP are single stage, normal priming
More informationGRUNDFOS DATA BOOKLET AP, KP. Wastwater pumps 50 Hz
GRUNDFOS DATA BOOKLET AP, KP Wastwater pumps 5 z Contents General data Performance range Page 3 Applications Page 5 Examples of application Page 5 Pump overview Page 6 Type key for AP pumps Page 6 Type
More informationXLE50 FLOW RATE (LPM) Flow Rate (GPM)
Pump Specifications XLE50 Series ½ HP Submersible Sewage Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 25 XLE50 FLOW RATE (LPM) 0 100 200 300 400 500
More informationDewatering Submersible sewage pumps
Series description Wilo-Drain TP 80/TP 100 Equipment/function Thermal motor monitoring Leakage detection in the motor ATEX-certified Sheath current cooling Materials Pump housing: PUR Impeller: PUR Shaft:
More informationLITERS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS GALLONS PER MINUTE
TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications PRG - SERIES Residential Grinder Pump 60 LITERS PER MINUTE 0 20 40 60 80 100 120 140 160 180 18 50 16 14 40 12 30 10 8 20 6 10 4 2 0 0 0 10 20
More informationSKHS SERIES 2 HP 1-1/2 HP 1 HP 1/2 HP CAPACITY-U.S. G.P.M.
Performance RPM: 3450 Discharge: 2" Solids: 2" Wholesale Products Page: 6560-1 Section: Performance 80 70 2 HP TOTAL DYNAMIC HEAD-FEET 60 50 40 30 20 1 HP 1-1/2 HP 1/2 HP 10 0 0 32 64 96 128 160 192 CAPACITY-U.S.
More informationELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS. Ranges MX, V, K Discharge Size DN 80 - DN 150
ELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS Ranges MX, V, K Discharge Size DN 80 - DN 150 T h e s o u r c e f o r h i g h e f f i c i e n c y High Performance in Waste Water Pumping HOMA submersible waste
More informationSUBMERSIBLE PUMP RANGE
SUBMERSIBLE PUMP RANGE www.vegapumps.co.za INDEX VXM / VX SUBMERSIBLE PUMP... 4 PERFORMANCE DATA... 5 V RANGE SCREENED SWAGE SUBMERSIBLE PUMP... 6 PERFORMANCE DATA... 7 DIMENSIONAL DRAWING... 9 C-SERIES
More informationPump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump
Pump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump LE40_P1 R8/17/2017 Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE40-Series
More informationPump Specifications. LE50 Series ½ HP Submersible Sewage Pump
Pump Specifications LE50 Series ½ HP Submersible Sewage Pump LE50_P1 R11/16/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE50-Series Dimensional
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationPump Station. Ama-Porter CK Pump Station. Type Series Booklet
Pump Station Ama-Porter CK Pump Station Type Series Booklet Legal information/copyright Type Series Booklet Ama-Porter CK Pump Station All rights reserved. The contents provided herein must neither be
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump
Pump Specifications 250 Series Submersible Sump / Effluent Pump 250_P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 250-Series Dimensional
More informationPump Specifications LE70-Series 3/4 HP Submersible Sewage Pump
Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R9/3/2013 Copyright 2013 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional
More informationSKV40. Performance Data. Wholesale Products Page: Section: Performance Data Dated: January RPM: 1550 Discharge: 2" Solids: 2" GPM: TDH:
Performance RPM: 1550 Discharge: 2" Solids: 2" Wholesale Products Page: 6730-1 Section: Performance 8 25 7 20 HEAD-METERS 5 4 HEAD-FEET 15 4/10 HP 3 10 2 0 0 20 40 60 80 Capacity-U.S. G.P.M. Liters/Second
More informationPump Specifications LE70-Series 3/4 HP Submersible Sewage Pump
Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R3/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional
More informationPump Specifications FL50 Series 1/2 hp Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL50 Series 1/2 hp Submersible Effluent Pump Flow (Liters Per Minute) 60 0 38 76 114 151 189 227 265 303 341 379 18 50 15 40 12 30 9 20 6 10 3 0 0 0 10 20
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationHYDROMATIC SKHS SERIES SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR
PERFORMANCE DATA Wholesale Products Page: 6560-1 RPM: 450 Discharge: 2 Solids: 2 80 70 2 HP 60 TOTAL DYNAMIC HEAD-FEET 50 40 0 1 HP 1-1/2 HP 1/2 HP 20 10 0 0 2 64 96 128 160 192 CAPACITY-U.S. G.P.M. The
More informationCOLLECTION STATIONS AND WASTE WATER LIFTING DESIGN SPECIFICATIONS
Lenntech info@lenntech.com Tel. +31-152-61-9 www.lenntech.com Fax. +31-152-616-289 VACUSYSTEM 2 is an automatic pumping station, pre-assembled and ready to use. The ideal solution when waste water is collected
More informationWaste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Liquid Pump MK Type Series Booklet Legal information/copyright Type Series Booklet MK All rights reserved. The contents provided herein must neither be distributed,
More informationXFL70 FLOW RATE (LPM) Flow Rate (GPM)
Pump Specifications XFL70 Series ¾ HP Submersible Effluent Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 50 XFL70 FLOW RATE (LPM) 0 50 100 150 200 250
More informationData sheet: Wilo-Drain TP 65 F 91/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 36 m 3 /h Optimal delivery head H opt 6.0 m Optimum
More informationSPD50H/100H. Performance Data SPD100H SPD50H. Wholesale Products Page: Section: Performance Data Dated: April 2002 Supersedes: January 2001
Performance SPD50H/100H RPM: 3450 Discharge: 2" Solids: 3/4" Wholesale Products Page: 6130-1 Section: Performance Dated: April 2002 Supersedes: January 2001 SPD50H SPD100H The curves reflect maximum performance
More informationAma Porter. 50 Hz. Submersible motor pumps
Type series booklet 2539.51 10 Ama Porter Submersible motor pumps 50 Hz Fields of Application Pumping of waste water containing solid matter or domestic sewage such as waste from toilets, washing machines,
More informationSUBMERSIBLE PUMPS EFFLUENT DISPOSAL RANGE 4 poles - 50 Hz
operating limits Flow rates up to: m 3 /h Head up to: m CL Range of temperature of the liquid: +3 to C* Density of the liquid:,5 max. ph of the liquid: 3- Maximum immersion: Maximum particle size: m Ø
More informationAutomatic Waste Water Pump Station. Evamatic-Box N. Type Series Booklet
Automatic Waste Water Pump Station Evamatic-Box N Type Series Booklet Legal information/copyright Type Series Booklet Evamatic-Box N All rights reserved. The contents provided herein must neither be distributed,
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationSUBMERSIBLE SEWAGE AND EFFLUENT PUMPS
SUBMERSIBLE SEWAGE AND EFFLUENT PUMPS ISO 9001:2008 Certified Company A Mark of Quality SUBMERSIBLE SEWAGE AND EFFLUENT PUMPS NON-CLOG SUBMERSIBLE SEWAGE PUMPS : MBH non-clog submersible sewage pumps offer
More informationJUNG PUMPEN CONTROL UNITS
CONTROL UNITS NE 1 ND 3 Control units for switching the pump on and off depending upon the level using float switches. vailable for 230 V C motors or 400 V DC motors and a connecting voltage of up to 3.2
More informationDRD - DRS - DRF. SUBMERSIBLE ELECTRIC PUMPS FOR SEWAGE in cast iron
DRD Cast iron submersible electric pumps for sewage with impeller with several channels APPLICATIONS Moving sewage, foul liquids in general Emptying seepage water Emptying cesspits Draining excavations
More informationLIFTSON M-LIX L. LIFT-PUMP MODULES Domestic waste water 50 Hz Complies with standard EN RANGE OF APPLICATION APPLICATIONS ADVANTAGES
RANGE OF APPLICATION Flows up to: 40 m 3 /h Manometric head up to: 22 m Maximum water temperature: + 3 à 40 C Particle size: 45 mm Inlet pipe: DN 40/50/100/150 Outlet: DN 80 Vent: DN 70 LIFTSON M-LIX L
More informationElectric submersible pumps SEMISOM for sewage water
40 SEMISOM Electric submersible pumps SEMISOM pplication - To convey waste and sewage water from septic tanks; - To drain rain water; - To pump liquids containing solids and filaments; - To pump sewage
More informationHYDROMATIC SPD50H/100H SUBMERSIBLE HIGH HEAD, DOUBLE SEAL EFFLUENT
PERFORMANCE DATA Wholesale Products Page: 6130-1 Supersedes: April 2002 RPM: 3450 Discharge: 2 Solids: ¾ SPD50H SPD100H HEAD-METERS 18 12 6 TOTAL HEAD IN FEET 60 40 20 0 0 Capacity-U.S. G.P.M. SPD50H SPD100H
More informationMYERS 3MW VERTICAL DISCHARGE WASTEWATER PUMPS. Sewage, high-capacity sump, effluent
The Myers heavy-duty series pumps are designed for residential raw sewage and light commercial applications. The non-clogging two-vane impeller delivers high-efficiency pumping and easily handles trashy
More informationDrainage pumps Series KEP
Series information KEP_02_EN - Product overview - Executions - Materials - Sectional and dimensional drawings We are your partner in transporting any liquid from one place to another. We offer a wide range
More informationPump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump 70 Flow (Liters Per Minute) 0 38 76 114 151 189 227 265 303 341 379 21 FLH 60 60 FL 60 18 50 15 40 12 30
More information.2 Section Waste Management and Disposal..5 Section Thermometers and Pressure Gauges Piping Systems.
Issued 2005/06/01 Section 15440 Plumbing Pumps Page 1 of 9 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal..3 Section 01780 Closeout
More informationSide channel pumps ADH/CDH AEH TECHNICAL DATA. Temperature: max. 120 C. PN 40 for AEH
Side channel pumps ADH/CDH 0801... 2504 AEH 0805... 0808 TECHNICAL DATA Capacity: Head: Speed: max. 7,2 m³/h max. 400 m max. 3000 rpm Temperature: max. 120 C Casing pressure: Shaft sealing: PN 25 for ADH/CDH
More informationPump Specifications 290 Series 3/4 hp Submersible Effluent Pump
Pump Specifications 290 Series 3/4 hp Submersible Effluent Pump 290_P1 R09/7/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 290-Series Dimensional
More informationPosition Qty. Description Single Price
Position Qty. Description Single Price 1 SEG.4.26.2.5B On request Product No.: 9675913 Note! Product picture may differ from actual product Grundfos SEG pumps are submersible pumps with horizontal discharge
More informationNBE40-125/139 AS-F2-A-BAQE
GRUNDFOS DATA BOOKLET NBE-125/139 AS-F2-A-BAQE Grundfos pump 999983 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/999983/nbe--125-139-as-f2-a-e-baqe.html
More informationSeries description: Wilo-Drain TM/TMW/TMR 32
Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled
More informationPump Specifications 280 Series 1/2 hp Submersible Effluent Pump
Pump Specifications 280 Series 1/2 hp Submersible Effluent Pump 280_P1 R01/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 280-Series Dimensional
More informationWaste Water, Condensate and Heat Transfer Fluid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Fluid Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationTechnical Data BEST 2~5. Stainless Steel Submersible Sump Pumps EBARA PUMPS AUSTRALIA PTY. LTD. Best 2-5_Techdata_SS_V10
Technical Data BEST 2~5 Stainless Steel Submersible Sump Pumps EBARA PUMPS AUSTRALIA PTY. LTD. Best 2-5_Techdata_SS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationSeries description: Wilo-Drain TM/TMW/TMR 32
Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled
More informationELECTRIC SUBMERSIBLE PUMPS SEMISOM/80
Electric pumps for professional applications to convey sewage water, entirely designed and manufactured in our Italian facility. APPLICATION PERFORMANCE RANGE To convey waste and sewage water from septic
More informationElectric submersible pumps SEMISOM for sewage water
pplication - To convey waste and sewage water from septic tanks; - To drain rain water; - To pump liquids containing solids and filaments; - To pump sewage water even through pipes with reduced diameter
More informationELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS. Rangess AK, KXAKX Discharge Size DN 200 DN
ELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS Rangess AK, KXAKX Discharge Size DN 200 DN 500 T h e s o u r c e f o r h i g h e f f i c i e n c y High Performance in Waste Water Pumping HOMA submersible waste
More informationHYDROMATIC SK75/100 SUBMERSIBLE SEWAGE EJECTOR
SK75/100 PERFORMANCE DATA Wholesale Products Page: 6300-1 RPM: 1750 Discharge: 2 Solids: 2 12 40 HEAD-METERS 9 6 3 TOTAL HEAD IN FEET 30 20 10 SK75 SK100 0 0 Capacity-U.S. G.P.M. 0 20 40 60 80 100 120
More informationSeries description: Wilo-DrainLift KH 32
Series description: Wilo-DrainLift KH 32 H[m] Wilo-DrainLift KH 32 4 3 2 1 Design Small sewage lifting unit (floor-mounted installation) Application Sewage lifting unit ready for connection for limited
More informationECC ECC Flow(USGPM) Sump & Effluent De-watering Drainage. Phase Voltage Approx Weight (lbs)
Series ECC - Submersible Sump Pump Wilo ECC 3 2 2 1 1 ECC29-1. ECC22-1.33 Wilo-SP-ECC 34 RPM 6 Hz - North America 1 2 3 4 6 7 Stainless steel bottom-screened inlet Replaceable piggyback tether float switch
More informationTRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
More informationDewatering pumps for raw water pumping. / / grundfos DW RANGE
grundfos DW RANGE Dewatering pump 0.7 - kw Dewatering pumps for raw water pumping efficient state-of-art dewatering pumps Unique user benefits The Grundfos DW pumps form part of a complete range of wastewater
More informationNon-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of
More informationSubmersible Grinder Pumps Type ABS Piranha
Submersible Grinder Pumps Type ABS Main Applications Sulzer s range of submersible grinder pumps, type ABS, contain the most effective cutting system for use in pressure sewer systems. The pumps have proven
More informationJUNG PUMPEN BAUFIX 200. Instruction Manual
JUNG PUMPEN BAUFIX 200 EN Instruction Manual B 48216-10-1705 www.jung-pumpen.de Baufix 200-32 2 3 Qualification and training of personnel All personnel involved with the operation, servicing, inspection
More informationOIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100
OIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100 The Oil Smart OSS-100 System, when combined with a manual sump pump, will automatically pump water without the risk of pumping oil into the environment. Additionally,
More informationour contribution for environmental protection Sealless magnetic coupled centrifugal pumps acc. to EN Type NML / NMB
Sealless magnetic coupled centrifugal pumps acc. to EN 22858 our contribution for environmental protection Type NML / NMB General Magnetic coupled DICKOW-pumps of the series NM are sealless pumps. The
More informationSDL i MACERATING SUBMERSIBLE PUMPS
OPERATING LIMITS Flow up to: 6 m 3 /h Head up to: 36 m Max. particle size: 6 mm DN of discharge port: Protection index: 68 SDL i MACERATING SUBMERSIBLE PUMPS Lifting of waste water Commercial pole - 5
More informationSubmersible Long Shaft Pumps for the Chemical Industry Type NCT/NMT
Submersible Long Shaft Pumps for the Chemical Industry Type NCT/NMT General The DICKOW submersible pump, type NCT, for the chemical industry is a vertical pump with separate discharge pipe. The maximum
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationNB /263 AS-F2-A-BAQE
GRUNDFOS DATA BOOKLET NB125-25/263 AS-F2-A-BAQE Grundfos pump 9832195 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb/9832195/nb-125-25-263-as-f2-a-e-baqe.html
More informationPump Specifications FL100 Series Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL100 Series Submersible Effluent Pump Flow (Liters Per Minute) 100 0 38 76 114 151 189 227 265 303 341 379 416 30 90 27 80 24 70 21 60 18 50 15 40 12 30 9
More informationHTM Circulation Pumps acc. to DIN EN 733 Type NKLs
HTM Circulation Pumps acc. to DIN EN 733 Type NKLs General The DICKOW standard HTM pumps, series NKLs according to EN 733, are designed as centrifugal pumps of light duty for handling heat transfer media.
More information