Safety Code for Existing Elevators and Escalators
|
|
- Dwight Augustine Stewart
- 5 years ago
- Views:
Transcription
1 ASME A (Revision of ASME A ) Safety Code for Existing Elevators and Escalators Includes Requirements for Electric and Hydraulic Elevators and Escalators A N A M E R I C A N N A T I O N A L S T A N D A R D
2 ASME A (Revision of ASME A ) Safety Code for Existing Elevators and Escalators Includes Requirements for Electric and Hydraulic Elevators and Escalators AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY USA
3 Date of Issuance: August 26, 2011 The next edition of this Code is scheduled for publication in ASME issues written replies to inquiries concerning interpretations of technical aspects of this Code. The interpretations will be included with each edition. Interpretations are also published on the ASME Web site under the Committee Pages at as they are issued. ASME is the registered trademark of The American Society of Mechanical Engineers. This code was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the publicat-large. ASME does not approve, rate, or endorse any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code. ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. The American Society of Mechanical Engineers Three Park Avenue, New York, NY Copyright 2011 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved Printed in U.S.A.
4 CONTENTS Foreword... Committee Roster... Preface... Summary of Changes... vi viii xii xv Part I Introduction Scope Application of Code Purpose and Exceptions Definitions Alterations, Maintenance, and Inspections and Tests Reference Documents Part II Hoistways and Related Construction for Electric Elevators Scope Hoistways Machine Rooms and Machinery Spaces Pits Clearances and Runbys Protection of Spaces Below Hoistways Hoistway Entrances Hoistway-Door Locking Devices, Parking Devices, and Access Power Operation of Doors and Gates Part III Machinery and Equipment for Electric Elevators Scope Buffers and Bumpers Counterweights Car Frames and Platforms Car Enclosures Safeties Speed Governors Capacity and Loading Driving Machines and Sheaves Terminal Stopping Devices Operating Devices and Control Equipment Emergency Operation and Signaling Devices Suspension Means and Their Connections Part IV Hydraulic Elevators Scope Hoistway, Hoistway Enclosures, and Related Construction Mechanical Equipment Driving Machines Valves, Supply Piping, and Fittings Tanks Terminal Stopping Devices Operating Devices and Control Equipment Additional Requirements for Counterweighted Hydraulic Elevators Additional Requirements for Roped-Hydraulic Elevators iii
5 Part V Escalators Scope Construction Brakes Operating and Safety Devices Lighting of Escalators Entrance and Egress Ends Part VI Dumbwaiters Scope Hoistway, Hoistway Enclosures, and Related Construction Machinery and Equipment for Hand and Electric Dumbwaiters Machinery and Equipment for Hydraulic Dumbwaiters Part VII Hand Elevators Scope Hoistway, Hoistway Enclosures, and Related Construction Machinery and Equipment Part VIII Sidewalk Elevators Scope Hoistway, Hoistway Enclosures, and Machine Rooms Machinery and Equipment Part IX Moving Walks Scope Protection of Floor Openings Protection of Supports and Machine Spaces Against Fire Construction Requirements Entrance and Egress Ends Driving Machine, Motor, and Brake Operating and Safety Devices Lighting and Access Part X Private Residence Elevators Scope Hoistway, Hoistway Enclosures, and Related Construction Cars Counterweights Safeties and Governors Car and Counterweight Guide Rails and Fastenings Car and Counterweight Buffers Driving Machines, Sheaves, and Their Supports Terminal Stopping Devices Operating Devices and Control Equipment Emergency Signal Devices Limitation of Load, Speed, and Rise Marking Plates Suspension Means Figures Inside Net Platform Areas for Passenger Elevators Caution Sign Tables 1.6(a) Reference Documents (b) Procurement Information Maximum Inside Net Platform Areas for the Various Rated Loads Minimum Factors of Safety for Suspension Wire Ropes iv
6 Nonmandatory Appendices A Distances Between Hoistway Doors and Car Doors or Gates B Types of Roped-Hydraulic Elevators C A , Rules D Rack and Pinion Machines (A , Rules d, and Rule e) Index v
Large Diameter Steel Flanges
ASME B16.47-2011 (Revision of ASME B16.47-2006) Large Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.47-2011 (Revision of ASME B16.47-2006) Large
More informationMetallic Gaskets for Pipe Flanges
ASME B16.20-2012 (Revision of ASME B16.20-2007) Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed AN AMERICAN NATIONAL STANDARD ASME B16.20-2012 (Revision of ASME B16.20-2007) Metallic
More informationMobile and Locomotive Cranes
ASME B30.5-2014 (Revision of ASME B30.5-2011) Mobile and Locomotive Cranes Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings AN AMERICAN NATIONAL STANDARD ASME B30.5-2014
More informationSlings ASME B Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings. (Revision of ASME B30.
ASME B30.9-2014 (Revision of ASME B30.9-2010) Slings Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings AN AMERICAN NATIONAL STANDARD ASME B30.9-2014 (Revision of ASME B30.9-2010)
More informationPipe Flanges and Flanged Fittings
ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe Flanges and Flanged Fittings NPS ½ Through NPS 24 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe
More informationSpecification for Sealless Horizontal End Suction Centrifugal Pumps for Chemical Process
ASME B73.3-2015 (Revision of ASME B73.3-2003) Specification for Sealless Horizontal End Suction Centrifugal Pumps for Chemical Process AN AMERICAN NATIONAL STANDARD ASME B73.3-2015 (Revision of ASME B73.3-2003)
More informationGas Turbine Aircraft Engines
ASME PTC 55-2013 Gas Turbine Aircraft Engines Performance Test Codes AN AMERICAN NATIONAL STANDARD ASME PTC 55-2013 Gas Turbine Aircraft Engines Performance Test Codes AN AMERICAN NATIONAL STANDARD Two
More informationCranes and Monorails (With Underhung Trolley or Bridge)
ASME B30.17-2015 (Consolidation of ASME B30.11 and B30.17) Cranes and Monorails (With Underhung Trolley or Bridge) Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings AN AMERICAN
More informationGuide for Inspection of Elevators, Escalators, and Moving Walks
ASME A17.2-2010 (Revision of ASME A17.2-2007) Guide for Inspection of Elevators, Escalators, and Moving Walks Includes Inspection Procedures for Electric Traction and Winding Drum Elevators, Hydraulic
More informationGuide for Inspection of Elevators, Escalators, and Moving Walks
ASME A17.2-2014 (Revision of ASME A17.2-2012) Guide for Inspection of Elevators, Escalators, and Moving Walks Includes Inspection Procedures for Electric Traction and Winding Drum Elevators, Hydraulic
More informationBioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD
More informationEvaluation of Visibility From Powered Industrial Trucks
ANSI/ITSDF B56.11.6-2005 (Reaffirmation of ASME B56.11.6 1992) Evaluation of Visibility From Powered Industrial Trucks AN AMERICAN NATIONAL STANDARD INDUSTRIAL TRUCK STANDARDS DEVELOPMENT FOUNDATION A
More informationBioprocessing Equipment
ASME BPE-2009 (Revision of ASME BPE-2007) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2009 (Revision of ASME BPE-2007) Bioprocessing Equipment AN INTERNATIONAL STANDARD
More informationWelded and Seamless Wrought Steel Pipe
(Revision of ASME B36.10M-2000) Welded and Seamless Wrought Steel Pipe AN AMERICAN NATIONAL STANDARD ment Copyright provided ASME by IHS International Licensee=Bureau Veritas/5959906001, 10/28/2004 6:59
More informationWelded and Seamless Wrought Steel Pipe
[Revision of ASME B36.10M-2004 (R2010)] Welded and Seamless Wrought Steel Pipe HEBEI METALS INDUSTRIAL LIMITED HEBEI METALS INDUSTRIAL LIMITED Web:www.metalspiping.com E-mail: sales@metalspiping.com AN
More informationBioprocessing Equipment
ASME BPE-2014 (Revision of ASME BPE-2012) Bioprocessing Equipment AN INTERNATIONAL STANDARD ASME BPE-2014 (Revision of ASME BPE-2012) Bioprocessing Equipment AN INTERNATIONAL STANDARD Two Park Avenue New
More informationARTICLE SAFETY CODES FOR ELEVATORS, ESCALATORS, MANLIFTS AND HOISTS. Elevator Safety
ARTICLE 21. 3 SAFETY CODES FOR ELEVATORS, ESCALATORS, MANLIFTS AND HOISTS Elevator Safety (The following Indiana Amendments are reprinted here from the Indiana government web site for your convenience.
More informationMalleable Iron Threaded Fittings
(Revision of ASME B16.3-1998) Malleable Iron Threaded Fittings Classes 150 and 300 A N A M E R I C A N N A T I O N A L S T A N D A R D (Revision of ASME B16.3-1998) Malleable Iron Threaded Fittings Classes
More informationAustralian Standard. SAA Lift Code. Part 4: Service lifts Power operated. AS (Incorporating Amendment Nos 1 and 2)
AS 1735.4 1986 (Incorporating Amendment Nos 1 and 2) AS 1735.4 Australian Standard SAA Lift Code Part 4: Service lifts Power operated This Australian Standard was prepared by Committee ME/4, Lift Installations.
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9386-2 First edition 2000-11-01 Power-operated lifting platforms for persons with impaired mobility Rules for safety, dimensions and functional operation Part 2: Powered stairlifts
More informationAustralian Standard. Cranes, hoists and winches. Part 6: Guided storing and retrieving appliances AS AS
AS 1418.6 2004 AS 1418.6 2004 Australian Standard Cranes, hoists and winches Part 6: Guided storing and retrieving appliances This Australian Standard was prepared by Committee ME-005, Cranes. It was approved
More informationA X, Safety Code for Elevators and Escalators
June 2014 Draft for Public Review A17.1-201X, Safety Code for Elevators and Escalators (Proposed Revisions of ASME A17.1-2013) TENTATIVE SUBJECT TO REVISION OR WITHDRAWAL Specific Authorization Required
More informationFor BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS
For BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an Indian Standard) Draft Indian Standard SPECIFICATION
More informationBioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 CONTENTS Foreword... vii Statements of Policy... viii Committee Roster...
More informationPART XV Metering Systems SECTION 2 GUIDE TO GAS METERING SYSTEMS
THE INSTITUTE OF PETROLEUM PETROLEUM MEASUREMENT MANUAL PART XV Metering Systems SECTION 2 GUIDE TO GAS METERING SYSTEMS THE INSTITUTE OF PETROLEUM PETROLEUM MEASUREMENT MANUAL PART XV Metering Systems
More information2004 ASME BOILER & PRESSURE VESSEL CODE
2004 ASME BOILER & V PRESSURE VESSEL CODE AN INTERNATIONAL CODE NONDESTRUCTIVE EXAMINATION ASME BOILER AND PRESSURE VESSEL CODE AN INTERNATIONAL CODE V NONDESTRUCTIVE EXAMINATION 2004 Edition July 1, 2004
More informationMARKING STANDARD FOR SPRAY NOZZLES USED WITH PORTABLE PRESSURE WASHERS
PWMA PW301-2012 PWMA Standard MARKING STANDARD FOR SPRAY NOZZLES USED WITH PORTABLE PRESSURE WASHERS Pressure Washer Manufacturers Association Sponsor: 1300 Sumner Avenue Cleveland, Ohio 44115-2851 www.pwma.org
More informationISO INTERNATIONAL STANDARD. Agricultural wheeled tractors and attachments Front loaders Carriages for attachments
INTERNATIONAL STANDARD ISO 23206 First edition 2005-06-01 Agricultural wheeled tractors and attachments Front loaders Carriages for attachments Tracteurs agricoles à roues et accessoires Chargeuses frontales
More informationISO INTERNATIONAL STANDARD. Reciprocating internal combustion engines Performance Part 4: Speed governing
INTERNATIONAL STANDARD ISO 3046-4 Third edition 2009-12-01 Reciprocating internal combustion engines Performance Part 4: Speed governing Moteurs alternatifs à combustion interne Performances Partie 4:
More informationScale Manufacturers Association. Standard. Vehicle Scale Characterization (SMA VCS-1102)
Scale Manufacturers Association Standard Vehicle Scale Characterization (SMA VCS-1102) First Edition Approved by SMA November 8, 2002 Copyright: SMA, November 2002 DISCLAIMER The Scale Manufacturers Association
More informationAmerican National Standard for Lighting Equipment Voltage Surge Requirements
American National Standard for Lighting Equipment Voltage Surge Requirements Secretariat: National Electrical Manufacturers Association Approved: December 21, 2017 American National Standards Institute,
More informationSYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN
SYLLABUS EASA 748/2012 Part-21 SUBPART F/G (FLY Course code: 004-C-P) Introduction During this course Participants will learn and revise the regulations and requirements according to EASA Part 21. Summary
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6489-3 Second edition 2004-06-01 Agricultural vehicles Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar Véhicules agricoles Liaisons mécaniques
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationISO/TR TECHNICAL REPORT. Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life
TECHNICAL REPORT ISO/TR 1281-1 First edition 2008-12-01 Rolling s Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life Roulements Notes explicatives sur l'iso 281 Partie
More informationISO 4395 INTERNATIONAL STANDARD. Fluid power systems and components Cylinder piston rod end types and dimensions
INTERNATIONAL STANDARD ISO 4395 Second edition 2009-10-15 Fluid power systems and components Cylinder piston rod end types and dimensions Transmissions hydrauliques et pneumatiques Dimensions et types
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 19880-1 First edition 2016-07-01 Gaseous hydrogen Fuelling stations Part 1: General requirements Carburant d hydrogène gazeux Stations-service Partie 1: Exigences générales
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5692-1 First edition 2004-04-01 Corrected version 2004-09-15 Agricultural vehicles Mechanical connections on towed vehicles Part 1: Dimensions for hitch rings of 50/30 mm cross
More informationISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie
INTERNATIONAL STANDARD ISO 9129 Second edition 2008-05-15 Motorcycles Measurement methods for moments of inertia Motocycles Méthodes de mesure des moments d'inertie Reference number ISO 2008 PDF disclaimer
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-17643-3 SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 3: Lifts for persons with Amdt 3 disabilities (stairlifting platforms) Published by Standards
More informationISO 8847 INTERNATIONAL STANDARD. Small craft Steering gear Cable and pulley systems. Petits navires Appareils à gouverner Systèmes à drosses et réas
INTERNATIONAL STANDARD ISO 8847 Second edition 2004-05-01 Small craft Steering gear Cable and pulley systems Petits navires Appareils à gouverner Systèmes à drosses et réas Reference number ISO 8847:2004(E)
More informationISO 1185 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1185 Third edition 2003-10-15 Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal
More informationISO INTERNATIONAL STANDARD. Straight cylindrical involute splines Metric module, side fit Part 2: Dimensions
INTERNATIONAL STANDARD ISO 4156-2 First edition 2005-10-01 Straight cylindrical involute splines Metric module, side fit Part 2: Dimensions Cannelures cylindriques droites à flancs en développante Module
More informationDESCRIPTION OF OPERATION EcoSpace elevator with KCM831 control
Owner s UM-01.26.001-USK All DRAFT KONE Montana 2011 rights Corporation KONE (-) guide reserved Elevator 2011-02-24 Corporation Project DESCRIPTION OF OPERATION EcoSpace elevator with KCM831 control All
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests
INTERNATIONAL STANDARD ISO 16001 First edition 2008-02-15 Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests Engins de terrassement Dispositifs de détection
More informationISO 4411 INTERNATIONAL STANDARD. Hydraulic fluid power Valves Determination of pressure differential/flow characteristics
INTERNATIONAL STANDARD ISO 4411 Second edition 2008-10-01 Hydraulic fluid power Valves Determination of pressure differential/flow characteristics Transmissions hydrauliques Distributeurs Détermination
More informationMajor Code changes MESA Continuing Education
Presented By: Bruce Horne - phone: (860) 676-5335 Major Code changes 2004-2013 MESA Continuing Education April 24, 2018 1 Color Code Blue is revised code language/sections Red is code additions 2 ASME
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO
More informationDEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR S OFFICE ELEVATORS
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR S OFFICE ELEVATORS (By authority conferred on the director of the department of licensing and regulatory affairs by section 8 of 1967 PA 227, MCL
More informationISO 4409 INTERNATIONAL STANDARD. Hydraulic fluid power Positivedisplacement
INTERNATIONAL STANDARD ISO 4409 Second edition 2007-04-01 Hydraulic fluid power Positivedisplacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationISO INTERNATIONAL STANDARD. Diesel engines End-mounting flanges for pumps Part 1: Fuel injection pumps
INTERNATIONAL STANDARD ISO 7299-1 First edition 2007-02-01 Diesel engines End-mounting flanges for pumps Part 1: Fuel injection pumps Moteurs diesels Brides de montage des pompes Partie 1: Pompes d'injection
More informationTemperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets
ANSI/EIA-364-17B-1999 Approved: April 23, 1999 EIA STANDARD EIA-364-17B TP-17B Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets EIA-364-17B (Revision
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21069-2 First edition 2008-05-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 2: Air
More informationISO 8665 INTERNATIONAL STANDARD. Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations
INTERNATIONAL STANDARD ISO 8665 Third edition 2006-06-01 Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations Petits navires Moteurs marins de propulsion
More informationISO 6022 INTERNATIONAL STANDARD. Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
INTERNATIONAL STANDARD ISO 6022 Second edition 2006-02-01 Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Transmissions hydrauliques Dimensions d'interchangeabilité
More informationPolicies and Procedures
PAGE 1 OF 5 PURPOSE This policy has been developed to define standards of conduct and establish mandatory training for faculty, staff, students, volunteers or contractors/vendors who operate golf carts
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14397-1 Second edition 2007-09-15 Earth-moving machinery Loaders and backhoe loaders Part 1: Calculation of rated operating capacity and test method
More informationISO 2941 INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating
INTERNATIONAL STANDARD ISO 2941 Second edition 2009-04-01 Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating Transmissions hydrauliques Éléments filtrants Vérification
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 3320 Third edition 2013-12-01 Fluid power systems and components Cylinder bores and piston rod diameters and area ratios Metric series Transmissions et composants hydrauliques
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20918 First edition 2007-10-15 Road vehicles Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems Test with roller brake
More informationISO 7612 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7612 Fourth edition 2009-10-15 Diesel engines Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems Mounting dimensions
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-1 Second edition 2016-04-01 Road vehicles Circuit breakers Part 1: Definitions and general test requirements Véhicules routiers Coupe-circuits Partie 1: Définitions et
More informationStandard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints 1
Designation: A 865 97 AMERICAN SOCIETY FOR TESTING AND MATERIALS 00 Barr Harbor Dr., est Conshohocken, PA 9428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for
More informationISO INTERNATIONAL STANDARD. Pneumatic fluid power Cylinders Final examination and acceptance criteria
INTERNATIONAL STANDARD ISO 10099 Second edition 2001-05-01 Pneumatic fluid power Cylinders Final examination and acceptance criteria Transmissions pneumatiques Vérins Critères de réception et de vérification
More informationISO INTERNATIONAL STANDARD. Road vehicles Road load Part 2: Reproduction on chassis dynamometer
INTERNATIONAL STANDARD ISO 10521-2 First edition 2006-10-01 Road vehicles Road load Part 2: Reproduction on chassis dynamometer Véhicules routiers Résistance sur route Partie 2: Reproduction sur banc dynamométrique
More informationISO INTERNATIONAL STANDARD. Metallic tube connections for fluid power and general use Part 2: 37 flared connectors
INTERNATIONAL STANDARD ISO 8434-2 Second edition 2007-09-01 Metallic tube connections for fluid power and general use Part 2: 37 flared connectors Raccordements de tubes métalliques pour transmissions
More informationISO INTERNATIONAL STANDARD. Metallic tube connections for fluid power and general use Part 6: 60 cone connectors with or without O-ring
INTERNATIONAL STANDARD ISO 8434-6 First edition 2009-08-15 Metallic tube connections for fluid power and general use Part 6: 60 cone connectors with or without O-ring Raccordements de tubes métalliques
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-2 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty
More informationISO 4016 INTERNATIONAL STANDARD. Hexagon head bolts Product grade C. Vis à tête hexagonale partiellement filetées Grade C. Fourth edition
INTERNATIONAL STANDARD ISO 4016 Fourth edition 2011-03-15 Hexagon head bolts Product grade C Vis à tête hexagonale partiellement filetées Grade C Reference number ISO 4016:2011(E) ISO 2011 PDF disclaimer
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1179-1 Second edition 2013-11-01 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded
More informationISO INTERNATIONAL STANDARD. Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance
INTERNATIONAL STANDARD ISO 18164 First edition 2005-07-01 Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance Pneumatiques pour voitures particulières, camions, autobus
More informationBUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY. (Not to be reproduced without the permission of BIS or used as an AMENDMENT)
Doc: ET 25(6345) BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an AMENDMENT) DRAFT AMENDMENT NO. 3 TO IS 14665 (Part 2 / Sec 1) : 2000
More informationISO INTERNATIONAL STANDARD. Hoists for the transfer of disabled persons Requirements and test methods
INTERNATIONAL STANDARD ISO 10535 Second edition 2006-12-15 Hoists for the transfer of disabled persons Requirements and test methods Lève-personnes pour transférer des personnes handicapées Exigences et
More informationStandard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series) 1
Designation: Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series) 1 This standard is issued under the fixed designation F2591; the number iediately following the designation
More informationISO 4409 INTERNATIONAL STANDARD. Hydraulic fluid power Positivedisplacement
INTERNATIONAL STANDARD ISO 4409 Second edition 2007-04-01 Hydraulic fluid power Positivedisplacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance
More informationISO 1217 INTERNATIONAL STANDARD. Displacement compressors Acceptance tests. Compresseurs volumétriques Essais de réception. Fourth edition
INTERNATIONAL STANDARD ISO 1217 Fourth edition 2009-07-01 Displacement compressors Acceptance tests Compresseurs volumétriques Essais de réception Reference number ISO 1217:2009(E) ISO 2009 PDF disclaimer
More informationISO 8710 INTERNATIONAL STANDARD. Motorcycles Brakes and brake systems Tests and measurement methods
INTERNATIONAL STANDARD ISO 8710 Second edition 2010-04-15 Motorcycles Brakes and brake systems Tests and measurement methods Motocyles Freins et systèmes de freinage Méthodes d'essai et de mesure Reference
More informationTITLE 16. TRANSPORTATION CHAPTER 27. TRAFFIC REGULATIONS AND TRAFFIC CONTROL DEVICES
NOTE: This is a courtesy copy of this rule. The official version can be found in the New Jersey Administrative Code. Should there be any discrepancies between this text and the official version, the official
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems
INTERNATIONAL STANDARD ISO 26867 First edition 2009-07-01 Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems Véhicules routiers Matériaux de friction
More informationAustralian Standard. Pneumatic fluid power General requirements for systems (ISO 4414:1998, MOD) AS AS 2788
AS 2788 2002 AS 2788 Australian Standard Pneumatic fluid power General requirements for systems (ISO 4414:1998, MOD) This Australian Standard was prepared by Committee ME-035, Fluid Power Systems and Components.
More informationF5 Platforms: FIPS Kit Installation MAN
F5 Platforms: FIPS Kit Installation MAN-0647-00 Table of Contents Table of Contents About the FIPS kit...5 Supported platforms...5 Apply tamper evidence seals to F5 platforms...5 Legal Notices...9 3 Table
More informationISO INTERNATIONAL STANDARD. Seal-less rotodynamic pumps Class II Specification
INTERNATIONAL STANDARD ISO 15783 First edition 2002-02-01 Seal-less rotodynamic pumps Class II Specification Pompes rotodynamiques sans dispositif d'étanchéité d'arbre Classe II Spécifications Reference
More informationAustralian/New Zealand Standard
AS/NZS 3001:2008 (Incorporating Amendment No. 1) AS/NZS 3001:2008 Australian/New Zealand Standard Electrical installations Transportable structures and vehicles including their site supplies AS/NZS 3001:2008
More informationAS/NZS :2011. Gate valves for waterworks purposes AS/NZS :2011. Part 1: Metal seated. Australian/New Zealand Standard
AS/NZS 2638.1:2011 Incorporating Amendment No. 1 Australian/New Zealand Standard Gate valves for waterworks purposes Part 1: Metal seated AS/NZS 2638.1:2011 AS/NZS 2638.1:2011 This joint Australian/New
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6149-1 Second edition 2006-02-15 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
More informationISO 3934 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3934 Second edition 2002-09-01 Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods Caoutchouc vulcanisé et
More informationRoad vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 28741 Second edition 2013-11-15 Road vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions Véhicules routiers
More informationISO INTERNATIONAL STANDARD. Industrial trucks Verification of stability Part 3: Reach and straddle trucks
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 22915-3 First edition 2008-09-15 Industrial trucks Verification of stability Part 3: Reach and straddle trucks Chariots de manutention Vérification
More informationISO 4928 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4928 Third edition 2006-07-15 Road vehicles Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature
More informationISO 2320 INTERNATIONAL STANDARD. Prevailing torque type steel nuts Mechanical and performance properties
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 2320 Fourth edition 2008-11-01 Prevailing torque type steel nuts Mechanical and performance properties Écrous autofreinés en acier Caractéristiques
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13726 Second edition 2008-03-01 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm Accessory mounting dimensions Transmissions
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 24347 First edition 2005-11-01 Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of ball-type coupling device (80 mm) Véhicules agricoles
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
More informationASME B31.8 INTERPRETATIONS VOLUME 13
ASME B31.8 INTERPRETATIONS VOLUME 13 Replies to Technical Inquiries July 2001 Through December 2003 Interpretations 13-1 Through 13-8 It has been agreed to publish intepretations issued by the B31 Committee
More informationAustralian/New Zealand Standard
AS/NZS 3112:2011 AS/NZS 3112:2011 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets AS/NZS 3112:2011 This Joint Australian/New Zealand Standard was prepared by Joint
More informationISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge
INTERNATIONAL STANDARD ISO 10605 First edition 2001-12-15 Road vehicles Test methods for electrical disturbances from electrostatic discharge Véhicules routiers Méthodes d'essai des perturbations électriques
More information