Installation Instructions
|
|
- Magnus Wilkerson
- 5 years ago
- Views:
Transcription
1 SOLAR GARDEN POWER CELL SKU# Rated Voltage 12VDC Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of the product. Please keep instructions for future reference. Warranty This product is covered by a 12 month warranty. Please retain proof of purchase. Warranty will be void if there is any damage due to improper usage or modification to the fitting. Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty. Installation requirements All wiring and installation of the light fitting must adhere to local and national wiring rules. eg. AS/NZS 3000:2007/Amendment 2:2012 Electrical installations. Select a suitable location for installation; - This product is suitable for outdoor use only. - This product is protected against water penetration to IP44 standards, which is splashing in every direction and It is not designed to be immersed in water. There must be adequate drainage to ensure that water does not pool around the product. Charging the control unit with a charger (not included) MUST be done so indoors as the charger and connector are not rated IP44. Failure to charge the system indoors will void warranty. Take care not to pull any electrical wires during unpacking as this may damage the connection. Lay out all the components on a smooth surface and make sure there are no components missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement. Check whether the fitting has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement. Installation directions Packing List Figure 1 1 P a g e V e r 1. 1
2 1 Solar panel x 1 2 U-shape solar panel bracket x 1 3 Spike bracket x1 4 Control unit x 1 5 Screw knob with spring washer x 2 6 Wing nut with screw bolt x 2 7 Mounting screw set for U-shape bracket x 2 8 Mounting screw set for control unit x 2 9 PIR sensor x 1 10 Extension cord for PIR sensor x 1 11 Charging connector x 1 12 Mounting screw set for PIR sensor x 2 Control unit (POWER CELL) 1. Installation holes installation holes to fix the control unit to the wall. Figure 2 2. Charging indicators Green light turned on Battery is fully charged. Green light flashing The battery is charging. Red light flashing The charging input voltage is too high, charging high voltage protection function active, cut off the charging circuit automatically. Indicator turned off The system has not started yet; The charging input voltage is too low or no charging input voltage; system failure error. Refer to trouble shooting. When the charging input voltage is too low, the unit will enter the stand by mode and will not charge. When the charging input voltage meets the minimum voltage requirement, the system will automaticallly begin charging. 2 P a g e V e r 1. 1
3 3. Battery indicators G / HIGH The green indicator lights up, the battery level is high. Y / MID The yellow indicator lights up, the battery level is medium. R / LOW The red indicator lights up, the battery level is low. The red indicator is flashing, this is the battery low power level warning. The system will automatically delay the warning time based on the output load, untill it cuts off the output circuit and goes into sleep mode. Indicators off The system has not started yet; system failure error. Battery low power protection function active (sleep mode). Refer to trouble shooting. If the load is lower, the warning delay time is longer. When the batterys low power protection funtion is active, you need to recharge the battery immediately. When recharging the battery and the yellow indicator lights up, the system will turn on the output voltage circuit automatically. When the system is left unused for a long time, please turn off the main power switch. 4. Power output port The power output rated: 12VDC / Max.2A, Max. 24W. The power output port has over-load protection, over-discharging protection and short-circuit protection. When the output load is over loaded or short circuited, the system will automatically cut off the output power. After the fault is removed, the system will re-start again. 5. ON/OFF switch Turn ON/OFF the system. 6. Solar panel or charger input port Charger input: 6-23VDC/ Max.1.5A, recommend to use 16.8VDC / 10W AC/DC adaptor (not included). Note: When recharging, the control unit and charger must be located indoors. Failure to charge the system indoors will void warranty. Solar panel input: 17.4VDC / 7Wp (Max. 17.4VDC / 25Wp). The charging input port has high input voltage protection, reverse polarity protection, and over-charging protection. 3 P a g e V e r 1. 1
4 Using the power cell system with solar panel installation Figure 3 1. Solar panel installation a. Install the U-shape bracket (fig.1-2) to the solar panel (fig.1 1) using the screw knobs provided (fig.1-5). b. Use the U-shape bracket as a template to mark the screw positions onto the ground, wall or roof and drill the holes. c. Install the U-shape bracket by using the mounting screws and anchors provided. Ensure the screws and anchors used are suitable for the mounting surface. d. Adjust the solar panel to the best angle to ensure there is sufficient sun light and fix it in place using the screw knobs provided. OR a. Install the U-shape bracket (fig.1-2) to the solar panel (fig.1 1) using the screw knobs provided (fig.1-5). b. Join the U-shape bracket (fig.1-2) and spike bracket (fig.1-3) together using the wing nut with screw bolts (fig.1-6). c. Insert the spike bracket into the ground. d. Adjust the solar panel to the best angle to ensure there is sufficient sun light and fix it in place using the screw knobs provided. 2. Control unit installation a. Use the control unit (fig 1-4) as a template to mark the screw positions onto the wall and drill the holes. b. Install the control unit to the wall using the mounting screws and anchors provided. Ensure the screws and anchors used are suitable for the mounting surface. 4 P a g e V e r 1. 1
5 3. PIR sensor installation To find a suitable location for installation, please take into consideration the following points: The ideal mounting height for the fitting is between 1.8m to 2.5m above the detection area (figure 4). The detection area is approximately 12 metres away at an angle of 180 wide. This may vary depending on the mounting height and location. The detection area may also alter at different temperatures. PIR sensors are more sensitive in cold weather than warm weather. The sensor has better sensitivity with movement across the detection area (figure 4). The sensor has reduced sensitivity with movement towards and away from the detection area (figure 4). If movement is made walking directly towards or away from the sensor and not across, the apparent detection range will be substantially reduced. To avoid false triggering, the sensor should be directed away from potential heat sources, such as barbeques, air-conditioners, air vents etc. Also avoid areas with electromagnetic disturbance, outside lighting, moving cars, trees or pets etc. Do not aim the sensor towards reflective surfaces, such as smooth white walls, swimming pools etc. To avoid damage to the sensor, do not aim the sensor towards the sun. Figure 4 a. Remove the mounting bracket from the body of the PIR sensor by loosening the screw (fig.5-1). b. Use the mounting bracket as a template to mark the screw postions onto the wall. c. Cut a hole on the edge of the mounting bracket to let the power cords come out from the back of the mounting bracket. (fig. 6) d. Install the mounting bracket onto the wall using the mounting screws and anchors provided. Ensure the screws and achors used are suitable for mounting surface. e. Install the PIR sensor body back to the mounting bracket by the screws (fig.5-1). Figure 5 5 P a g e V e r 1. 1
6 Figure 6 4. PIR Sensor setting: DURATION TIME: The length of time the light will remain switched on after activation can be adjusted from 10secs ±5 to 4mins ±1. Rotating the time from (+) to (-) will reduce the duration time. NOTE: Once the light has been triggered by the PIR sensor, any subsequent detection will start the timed period again from the beginning until there is no movement detected. LUX LEVEL: The lux control module has a built-in sensing device (photocell) that detects daylight and darkness. The () position means that the fitting will work at both day and night. The () position will only work at night. NOTE: If you want to test the detection area of the PIR sensor, please wait for the ambient light level to be below 20 lux. Figure 7 5. Wiring (figure 3) Connect the B-PIN plug of the solar panel to the solar input port (figure 2-6) of the control unit. Connect the PIR sensor to the power output port with or without an extension cord by using the B-PIN plug. Connect the Lucci wiring kit (SKU# / , sold separately) to the PIR sensor using the B-PIN plug. Connect the LED lamps (not included) to the Lucci wiring kit. Make sure that the LED lamps total wattage is less than 24W. Turn on the main switch (figure 2-5). Make sure that the battery has been fully charged for 12 hours before connecting the LED lamps to the control unit before using the system for the first time. Power cell system with charger (not included) installation Replace the solar panel with charger (not included) and connect the charger to the control unit using the charger connector (figure 7). For charger specifications, please refer to the specifications section in this manual. 6 P a g e V e r 1. 1
7 Figure 8 NOTE: Charger units are available at all good electrical stores. Charging spec: 6-23VDC/Max 1.5A, recommend to use 16.8VDC/10W AC/DC adaptor. Battery charge time and battery life 1. Charge time For solar: hours based on the IEC standard light intensity. For charger:4-5 hours based on recommended 16.8V/10W charger. 2. Battery life Load wattage Battery life 5 W 12 hours 10 W 6 hours 15 W 4 hours 20 W 3 hours A RT1270 (12V7.0Ah) type battery located inside the unit has a limited life of up to 2 years. After this time the battery can be changed over with a new one simply by: - Disconnecting the solar panel and luminaires from the control unit - Removing the 4 screws from the back to open the control unit - Unplug the connectors (red & black) and then removing the old battery - Replace it with a new battery by re-connecting the connector ensuring the red & black wires correspond to the red & black battery terminal Note: RT1270 (12V7.0Ah) battery can be purchased from all good battery stores - Ensure the battery is securely seated and close the cover on the control unit and secure with the 4 screws - Reconnect the solar panel and luminaires to the control unit 7 P a g e V e r 1. 1
8 Trouble shooting: 1. System fails to start (indicator light off) Turn off the main power switch and remove the charging device. Reinstall and restart the system. Turn on/off the main power switch 3 times. 2. Indicator light is abnormal Make sure the charging device and load are correct and that it is connected properly. Turn off the main power switch, delay 3 seconds and turn on the system again. If the indicator lights are still abnormal, please turn off the main power switch and remove all load devices. Turn on the main power switch again. 3. System cannot charge Check the charging device, make sure that the function of the charging device is normal. If charging with the solar panel, make sure sufficient sun light is available. Remove the charging device and reconnect it, making sure that the charging devices and this system are well connected. Turn off the main power switch, delay 3 seconds and turn it on. 4. System no output Make sure the load has not exceeded the Max. wattage. Make sure the battery power level is at least medium. Turn off the main power switch, delay 3 seconds and turn it on again. Safety tips Do not turn the control unit over. Do not drop the system or make impact to the system. Do not turn on the main power switch during transportation, faulty condition, or dangerous condition (battery leakage, control unit box damaged / burned / high temperature). 8 P a g e V e r 1. 1
9 Specifications Rated Voltage IP Rating Control Unit PIR Sensor Solar Panel Extension Cable Charging Converting Cable 12VDC IP44 Dimensions W177 mm x H171 mm x E 111mm Battery AGM 12VDC / 7Ah (Type: RT V7.0Ah) System Control Unit Rated 12VDC, output 12VDC/ Max. 2A Current Charger input: 6-23VDC / Max.1.5A Charging Input Port Solar panel input: 17.4VDC / 7Wp (Max. 17.4VDC / 25Wp) Power Output Port 12VDC / Max.2A, Max. 24W. VOLTAGE: 12 VDC WORKING TEMPERATURE: -50 to 40 WATTAGE: Max. 20W for fluorescent lamps; Max. 24W for LED lamps DETECTION ANGLE: Approximately 180 DETECTION DISTANCE: Max. 12 meters DURATION TIME: (10±5) seconds up to (4±1) minutes adjustable LUX CONTROL LEVEL: From daylight to night adjustable WITH 0.3M CABLES WITH B-PIN PLUG 17.4VDC / 7W; Dimensions: W260 mm x H 240mm; with 5M cable with B-PIN plug L=1.7M, with B-PIN plugs 0.1M; one end: φ2.3mm B-PIN water-proof plug ; The other end: φ5.5mm barrel andφ 2.1mm pin socket. 9 P a g e V e r 1. 1
Installation Instructions
LEDLUX TELLA SKU# 231091, 231093 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully
More informationInstallation Instructions
LEDLUX ECOFLOOD SKU# 231051, 231053, 231055 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions
More informationInstallation Instructions
LEDLUX CITYII DIMMABLE LED DOWNLIGHT SKU# 170600, 170601, 170602, 170603, 170604, 170605, 170606, 170607 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct
More informationInstallation Instructions
LEDLUX INFINITY MINI MARINE GRADE DIMMABLE LED DOWNLIGHT SKU# 170310, 170311 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please
More informationInstallation Instructions
LENNON 3 LIGHT PENDANT SKU# 039010, 039013 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions
More informationInstallation Instructions
QUINN 6 LIGHT PENDANT SKU# 039019, 039020 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions
More informationInstallation Instructions
LEDlux Lustre SKU# 181003 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before
More informationInstallation Instructions
LEDLUX EXPRESS MAXI DIMMABLE LED DOWNLIGHT SKU# 170577, 170578 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow
More informationInstallation Instructions
Vivid SKU# 170565, 170566, 170567, 170568 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions
More informationInstallation Instructions
ACCENT PINHOLE DOWNLIGHT SKU#177638, 177639, 177640, 177641 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality MFL product. To ensure correct function and safety, please read and follow
More informationINSTALLATION INSTRUCTIONS GT8503E SECURITY FLOODLIGHT SOLAR POWERED
INSTALLATION INSTRUCTIONS GT8503E SECURITY FLOODLIGHT SOLAR POWERED CARTON CONTENTS QUANTITY DESCRIPTION 1 FLOODLIGHT W/ MOTION SENSOR & RECHARGABLE BATTERY 2 SOLAR PANEL W/ 15 FOOT POWER CORD 1 MOUNTING
More informationInstallation Instructions
CHAMP DIMMABLE LED DOWNLIGHT SKU# 12049L, 12050L, 12051L, 12052L Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality GE branded product. To ensure correct function and safety, please read
More informationInstallation Instructions
LEDLUX GEORGIA SKU# 189090, 189092, 189094 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions
More informationPROFESSIONAL 270 o PIR MOTION DETECTOR
PROFESSIONAL 270 o PIR MOTION DETECTOR The unit can be installed only vertically (see the FIGURE 1A), not upside-down or horizontally (see the FIGURE 1B) as shown in the below drawing. FIGURE 1A 1. Motion
More informationCompact Security FloodLight
MAL615 Instructs.qxd 1/9/05 12:18 PM Page 3 Compact Security FloodLight Installation and Operation Instructions MAL615 (Series 5) Introduction The Arlec MAL615 Movement Activated Sensor Light is a compact
More informationInstallation Instructions
TITAN RECESSED SPOT LIGHT SKU#177010, 177011 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality MFL product. To ensure correct function and safety, please read and follow all instructions
More informationLED AC DRIVERLESS FLOODLIGHTS WITH PIR FOR MODEL: FLAC10BPIR, FLAC20BPIR, FLAC30BPIR & FLAC50BPIR
INTRODUCTION The LED AC Driverless Floodlights with PIR include a hanging / mounting bracket and a 100cm cable. SPECIFICATION LED 800-4000lm IP65 180-240V IK07 6000K 50Hz >80 Ra 10W- 50W Dimensions: FLAC10BPIR:
More informationPMWS2W SURFACE MOUNT 2-WIRE WALL SWITCH
infirm and children at night or when it is dark. Note: Read this entire manual before you start to install the system. SAFETY PRECAUTIONS PMWSW SURFACE MOUNT -WIRE WALL SWITCH Be sure to switch off power
More information120 LED DUAL HEAD SOLAR MOTION LIGHT
Version 1.2 120 LED DUAL HEAD SOLAR MOTION LIGHT Instruction Manual Item# 23401 Thank you very much for choosing a Nature Power Product! For future reference, please complete the owner record below: Model:
More informationASSEMBLY & FITTING INSTRUCTIONS P-LUX3 LED TRI-SENSOR LANTERN
TRI-SENSOR TECHNOLOGY GL90LU ASSEMBLY & FITTING INSTRUCTIONS P-LUX LED TRI-SENSOR LANTERN Please read these instructions carefully before attempting to install this lantern. It is advisable to keep these
More informationOPERATING INSTRUCTIONS Solar Motion-Activated Wedge Light
MOTION-ACTIVATED WEDGE LIGHT OPERATING INSTRUCTIONS Solar Motion-Activated Wedge Light Model #40235." IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE ABOUT YOUR SOLAR WEDGE LIGHT During the day,
More informationSOLAR SECURITY LIGHT with MOTION SENSOR
SOLAR SECURITY LIGHT with MOTION SENSOR Instruction Manual Model: GS-10 Introduction Thank you for your purchase. GAMA SONIC solar charged lighting eliminates the problems associated with most solar lighting
More informationASSEMBLY & OPERATING INSTRUCTIONS
Model #: 44150-SL ASSEMBLY & OPERATING INSTRUCTIONS IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE ABOUT YOUR SOLAR SECURITY LIGHT During the day, the solar panel included with this MAXSA Solar
More informationUser s Manual. Automatic Switch-Mode Battery Charger
User s Manual Automatic Switch-Mode Battery Charger IMPORTANT Read, understand, and follow these safety rules and operating instructions before using this battery charger. Only authorized and trained service
More informationSmart 110 with built-in flashlight for 6 240Ah lead-acid batteries
USER GUIDE Battery Charger Smart 110 with built-in flashlight for 6 240Ah lead-acid batteries Please read this user guide carefully before using the charger Use protective eyewear when handling batteries
More informationMotion Activated Solar Powered LED Security Light MODEL: PSO1
Motion Activated Solar Powered LED Security Light MODEL: PSO1 Please do not return this item to the store. For service or questions about your solar light, call our customer service at 800.284.8828 (8:30am
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS
ASSEMBLY AND INSTALLATION INSTRUCTIONS 356-9231 / 356-9232 WARNING: NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. Customer Service: 1-800-887-6326
More informationINSTRUCTIONS Solar Motion-Activated Wedge Light
INSTRUCTIONS Solar Motion-Activated Wedge Light MODELS #40234 #40235 #40236 IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE ABOUT YOUR SOLAR WEDGE LIGHT During the day, the solar cell charge panel
More informationVADA - V60-J PRODUCT OVERVIEW CONSTRUCTION MOTOR USAGE LIMITATIONS WARRANTY
PRODUCT OVERVIEW The VADA series of self priming jet pumps combine the functional benefits of centrifugal pumps and the practical and qualitative benefits of self-priming pumps. The Venturi system the
More informationMotion Sensing Coach Light
TM Motion Sensing Coach Light Model: SH-9291AU Installation and Operating Instructions FEATURES Automatically comes on when motion is detected. Automatically turns light off. Photocell keeps the light
More informationDUALBRITE Motion Sensing Coach Light
DUALBRITE Motion Sensing Coach Items Models 007677 SH-4144-AZ-B 063285 SH-4152-BK-A Questions or problems? Before returning to your retailer, refer to the troubleshooting guide in this manual or call our
More informationSolar Powered Rain Barrel Pump System
Solar Powered Rain Barrel Pump System Owner s guide step by step instructions for setting up your rainperfect pump and solar panel welcome to rainperfect getting started The RainPerfect pum p and solar
More informationDedicated PIR Light Controller c/w RF remote control for LEDPRO Floodlights
Dedicated PIR Light Controller c/w RF remote control for LEDPRO Floodlights Model: LEDPRORFKB Black Model: LEDPRORFKWH White Model: LEDPROFOB RF Remote Fob Installation & Operating Instructions 1 1. General
More informationPower Station. by Lithium USER MANUAL
Power Station by Lithium USER MANUAL Table of Content Contents of packaging Gusto Power Station User Maintenance Chart Notice and Warning Before Using Gusto Power Station Overview Gusto Power Station Main
More informationMOTION-ACTIVATED WALL LANTERN
SIZE: 8.5in X 11in Portfolio is a registered trademark of LF, LLC. All rights reserved. ITEM #0358718 MOTION-ACTIVATED WALL LANTERN MODEL #VEL-5069-MD-PIR Français p. 9 Español p. 17 ATTACH YOUR RECEIPT
More informationUSER MANUAL. Power GUARD UPS. Uninterruptible Power System
USER MANUAL Power GUARD UPS Uninterruptible Power System IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions for Power GUARD that should be followed during
More informationMANUAL D250S DUAL. Solar panel + Vehicle ground/solar panel
MANUAL CONGRATULATIONS on the purchase of your new CTEK professional battery management unit. This unit is part of a range of professional battery chargers from CTEK SWEDEN AB. It represents the latest
More informationVADA - V75-S PRODUCT OVERVIEW CONSTRUCTION USAGE LIMITATIONS MOTOR WARRANTY
PRODUCT OVERVIEW The VADA V75-S submersible pumps are suitable for installation in traditional wells, water deposits, collection tanks, clear watercourses, lakes etc. The V75-S provides a hydraulic system
More informationPhoenix Inverter
Manual EN Handleiding NL Manuel FR Anleitung DE Manual ES Appendix Phoenix Inverter 12 250 12 375 12 500 12 800 24 250 24 375 24 500 24 800 48 250 48 375 48 500 48 800 1. Safety instructions WARNING: ELECTRIC
More informationUninterruptible Power System
USER'S MANUAL Emergency Backup Power Supply For Use With Computer Loads Only Power Surge/Noise Protection Intelligent Auto-Shutdown Software Internet Line Protection Cost Efficiency UPS 1 st Edition Uninterruptible
More informationSCC-MPPT Solar Charge Controller
Table 4: Alarm point for low battery voltage table Model Alarm point SCC-MPPT-300 10.5 V SCC-MPPT-600 21.0 V Table 5: Charging hour table for reference Battery Capacity To 90% capacity @ 25A charging current
More informationOPERATOR'S MANUAL Model CHL91302 Battery Charger for use with LITHIUM EARTHWISE Lithium-ion Battery Pack
OPERATOR'S MANUAL Model CHL91302 Battery Charger for use with LITHIUM EARTHWISE Lithium-ion Battery Pack SPECIFICATIONS: Model Input Charging Voltage Charging Current Net Weight CHL91302 90-260 Volts,
More informationSolar Power System. User Manual
Solar Power System User Manual System introduction The point of the Solar Power System is to replace home power. It is also useful in situations such as: emergencies (rescue and disaster support), no power
More informationIV. PROOF OF PURCHASE: A warranty claim must be accompanied by proof of the date of purchase.
PD9100 / 9200 SERIES POWER CONVERTER OWNERS MANUAL PROGRESSIVE DYNAMICS, INC. POWER CONVERTER LIMITED WARRANTY I. LIMITED WARRANTY: Progressive Dynamics, Inc. warrants its power converter to be free from
More informationMightylite Solar LED PIR Floodlight with Solar Panel
INSTALLATION INSTRUCTIONS Mightylite Solar LED PIR Floodlight with Solar Panel Thank you for purchasing this SIMX LED PIR Floodlight with Solar Panel. This light is suitable for outdoor use. Please read
More informationSCC-MPPT Solar Charge Controller
Table 3: Charging voltage for 4 types of battery Battery Battery 12V battery system 24V battery system Type Type Code Bulk Floating Bulk Floating Vented 01 14.3 V 13.2 V 28.6 V 26.4 V Sealed 02 14.3 V
More informationDIAGNOSTIC POWER SUPPLY WSC 720. user guide. 12 V/24 V lead acid batteries ah
DIAGNOSTIC POWER SUPPLY WSC 720 user guide 12 V/24 V lead acid batteries 40-500 ah gb 1 Thank you for choosing this charger from Exide Technologies Your WSC720 is a quality product from Exide Technologies.
More informationASSEMBLY & OPERATING INSTRUCTIONS
Model #: 40330 Perfect for flags, signs, gardens, driveways, carports, garages, entrance doors decks, porches, or any large outdoor area where lighting is needed. ASSEMBLY & OPERATING INSTRUCTIONS IMPORTANT:
More informationAutomatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC
Automatic Battery Charger Switching mode with Micro-controlled Input:220-260Vac / Output: 12Volt DC User s Manual and Important Safety Information Model: OC-SW121080 / OC-SW121160 / OC-SW121210 FEATURES
More informationSCC-MPPT Solar Charge Controller
Solar Charge Controller Quick Guide 200W 300W 400W 600W 850W V. 2.2 1. Introduction solar charge controller uses PWM-based DSP controller to keep the batteries regulated and prevent batteries from overcharging
More information8-STAGE AUTOMATIC BATTERY CHARGER MCU CONTROLLED - HIGH FREQUENCY SWITCHMODE MODELS: KACHG1207, KACHG1212, KACHG1220, KACHG2410. Instruction Manual
8-STAGE AUTOMATIC BATTERY CHARGER MCU CONTROLLED - HIGH FREQUENCY SWITCHMODE MODELS: KACHG1207, KACHG1212, KACHG1220, KACHG2410 Instruction Manual Please read user manual carefully before use. WARNING
More informationEmergency lighting units EM series
EM power PRO EZ-3 Emergency lighting supply units Product description emergency lighting supply unit with DALI interface and automatic test function Properties Mains and emergency operation DALI interface
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0068 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult
More informationCX-SERIES ADVANCED BATTERY CHARGER
CX-SERIES ADVANCED BATTERY CHARGER Table of Content 1. IMPORTANT SAFETY INFORMATION... 2 1-1 General Safety Precautions... 2 1-2 Battery Precautions... 2 2. FEATURES... 3 2-1 Battery Charging Curve...
More informationSolar MPPT Battery Charging Controller
( New Model, Aug. 2015, Timer attached ) Solar MPPT Battery Charging Controller Free standing with Hybrid function ( Only for Li-Ion / Li-Polymer Battery ) ( Load Output Control Timer Equipped ) 1. FEATURES
More informationLithium Battery Deep cycle, Over charge and discharge protection, Free maintenance, >8years lifespan
ALL-IN-ONE SOLAR STREET LIGHT FEATURES: Integrated design, Led lamp, solar panel, PIR sensor, controller, battery all together in one body housing; Auto On/OFF; No need connect the cables; Easy to install
More informationSecurity Lighting INSTRUCTION MANUAL 16W, 28W, 36W & 50W PIR Security LED Floodlight
Security ighting ISTRUCTI MAUA 16W, 28W, 36W & 50W Security ED Floodlight Installation & operating instructions HYITE MIGHTYITE SECURITY ED FOODIGHT - ISTAATI AD OPERATIG ISTRUCTIS The Mightylite floodlight
More informationAutomatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC
Automatic Battery Charger Switching mode with Micro-controlled Input:220-260Vac / Output: 12Volt DC User s Manual and Important Safety Information Model: OC-SW121080 / OC-SW121160 / OC-SW121210 FEATURES
More informationRecommended Tools: Phillips Screwdriver, Flat Blade Screwdriver, 13mm and 10mm Wrench, 5/16 nut driver,
UPS-ST-120 UPSPro Outdoor UPS System Wireless Base Stations and Client Devices Surveillance Cameras Mission Critical Backup Power Remote Sensors Congratulations! on your purchase of the UPSPro Outdoor
More informationUse and Care Guide. Part # SC SV-OS-BZ SC SV-OS-W Model #
Part # SC-20-840-SV-OS-BZ SC-20-840-SV-OS-W Model # 51402241 51402242 Use and Care Guide LED SECURITY LIGHT Dusk to Dawn Questions, problems, missing parts? Call ETiSSL Customer Service 8 a.m. - 5 p.m.,
More informationUser Manual. Solar Charge Controller 3KW
User Manual Solar Charge Controller 3KW 1 CONTENTS 1 ABOUT THIS MANUAL... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 SAFETY INSTRUCTIONS... 3 2 INTRODUCTION... 4 2.1 Features... 4 2.2 Product Overview... 5
More informationLS0512R Solar Light Controller
LandStar LS0512R Solar Light Controller Nominal system voltage Maximum PV input voltage Nominal charge / discharge current 12VDC 35V 5A Contents 1 Important Safety Information... 1 2 General Information...
More informationInstalling the gate post bracket with the cardboard arm template
......... Installing the gate post bracket with the cardboard arm template... Installing gate posts brackets and arms for Push-to-Open or Pull-to-Open gates... Connection of Power Source 240Vac or Solar...
More informationc-go 24V/6A 24V/8A 24V/12A
c-go 24V/6A 24V/8A 24V/12A Battery charger GB Instruction manual 1 Index 1. Product description... 2 2. Safety advices... 3 3. Quick start guide... 4 4. Operation... 4 5. Problem solving... 6 6. Specifications...
More informationSolar Powered Chameleon Smart Globe
Solar Powered Chameleon Smart Globe Programmable Color Changing Solar Globelight Solar Powered Chameleon Smart Globe Contents 1. Introduction 2. Security Instructions 3. Components 4. Overview 5. Assembling
More informationSolar Charge Controller
Table 3: Charging voltage for 4 types of battery Battery Type Battery Type Code SC-600W MPPT Bulk Voltage Floating Voltage Vented 01 28.6 V 26.4 V Sealed 02 28.6 V 26.8 V Gel 03 28.6 V 27.4 V NiCd 04 28.6
More informationETATRACK active. Installation of Controller and Motor. 1 Function of the ETATRACK active Controller
ETATRACK active Installation of Controller and Motor Warning, new version Maximum open circuit voltage 80 V (See also on site 3) 1 Function of the ETATRACK active Controller The tracker controller calculates
More information82V LITHIUM-ION BATTERY CHARGER GC 400
82V LITHIUM-ION BATTERY CHARGER GC 400 (2907302) Owner s Manual TOLL-FREE HELPLINE: 1-855-470-4267 www.greenworkstools.com/82v-commercial/ Read all safety rules and instructions carefully before operating
More informationCompact 150 Watt Motion Sensing Halogen
TM Compact 150 Watt Motion Sensing Halogen Model: SH-9511AU Installation and Operating Instructions FEATURES Automatically comes on when motion is detected. Automatically turns light off. Photocell keeps
More informationHPP1 MK5 Owner s Manual
J Wolmarans Page 1 2017/03/07 Page 1 of 10 TABLE OF CONTENTS Page 1 Introduction...2 2 Models...2 3 Safety warnings...3 4 Features...3 5 Contents...3 6 Installation...3 6.1 Mounting the unit:...3 6.2 Connecting
More informationSBC / 2140 / Stage Battery Charger User Manual
SBC - 2130 / 2140 / 2150 3 Stage Battery Charger User Manual Keep this manual in a safe place for quick reference at all times. This manual contains important safety and operation instructions for correct
More informationLow Voltage Light Charging Light. USB Charging Outputs Solar Panel Input
Solar Lighting Kit Instruction Manual Thank you for choosing the PowertoAfrica Solar Lighting Kit. Our system has been designed to last for many years. If you have a problem the system can be easily repaired.
More informationSolar Gazebo Accent Lighting
READ AND SAVE THESE INSTRUCTIONS MODEL #GL23143 Gazebo Accent Lighting dear customer. Congratulations on your purchase of a PARADISE lighting product. Our products will help to enhance the beauty of your
More informationBRAVER UPS. (Uninterruptible Power System) User s Manual
BRAVER UPS (Uninterruptible Power System) User s Manual Safety CAUTION! This UPS utilizes voltages that may be hazardous. Do not attempt to disassemble the unit. The unit contains no user replaceable parts.
More informationSmart Battery Charger
BATTERY CHARGER Smart Battery Charger Model No. WSC-1215 (SB) WSC-1230 (SB) WSC-2408 WSC-2415 Manual Please read this manual carefully before installing and starting up this device. Figure 1 WSC-1215SB
More informationMatch 19" GE Digital Energy. Uninterruptible Power Supply VA. Technology for the Digital World. Match 19" UPS.
Match 19" Uninterruptible Power Supply 700-1500 VA Manufactured by: General Electric Company Telephone +41 (0)91 / 850 51 51 CH 6595 Riazzino (Locarno) Fax +41 (0)91 / 850 51 44 Switzerland Website www.gedigitalenergy.com
More informationHome Solar 400 (HS 400) Home Solar 800 (HS 800) Home Backup 400 (HB 400) Home Backup 800 (HB 800) Owner s Manual
Home Solar 400 (HS 400) Home Solar 800 (HS 800) Home Backup 400 (HB 400) Home Backup 800 (HB 800) Owner s Manual For safe and optimum performance, the Home Solar or Home Backup unit must be used properly.
More information10A / 15A / 20A Solar Charge Controller. PU1024 / PU1524 / PU2024 series INSTRUCTION MANUAL
10A / 15A / 20A Solar Charge Controller PU1024 / PU1524 / PU2024 series INSTRUCTION MANUAL Dear Customer, Thank you very much for choosing our product. This manual contains important information about
More informationUninterruptible Power System
USER'S MANUAL Emergency Backup Power Supply For Use With Computer Loads Only Power Surge/Noise Protection Intelligent Auto-Shutdown Software Internet Line Protection Cost Efficiency AVR Protection Compact
More informationAutomatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC
Automatic Battery Charger Switching mode with Micro-controlled Input:100-140Vac / Output: 12Volt DC User s Manual and Important Safety Information Model: #20085 (SW121080-06) FEATURES Congratulations on
More informationLong-Range Barrier Sensors
Long-Range Barrier Sensors Manual Model # of Beams Length E-9626-2B190Q 2 pairs 26 (66cm) E-9643-4B190Q 4 pairs 43 (109cm) E-9661-6B190Q 6 pairs 61 (155cm) E-9679-8B190Q 8 pairs 79 (201cm) 4 Different
More informationInstallation Manual GT500 GT500R RAB
Installation Manual GT500 GT500R RAB How Does Gotcha Work? Gotcha s infrared sensor sees small temperature changes caused by the motion of people or cars within its protection zone and turns on lights
More informationHPP1 MK5 Owner s Manual
J Wolmarans Page 1 2016/09/15 Page 1 of 9 TABLE OF CONTENTS Page 1 Introduction...2 2 Models...2 3 Safety warnings...3 4 Contents...3 5 Installation...3 5.1 Mounting the unit:...3 5.2 Connecting the battery:...3
More informationUser Manual. NiMH/NiCd Charger N, N, N, N Series
User Manual NiMH/NiCd Charger 452115-N, 452215-N, 452116-N, 452415-N Series READ THESE INSTRUCTIONS BEFORE USING THE CHARGER This battery charger is only designed for indoor use and should not come into
More informationSOLAR LIGHTING CONTROLLER SUNLIGHT MODELS INCLUDED IN THIS MANUAL SL-10 SL-10-24V SL-20 SL-20-24V
SOLAR LIGHTING CONTROLLER OPERATOR S MANUAL SUNLIGHT MODELS INCLUDED IN THIS MANUAL SL-10 SL-10-24V SL-20 SL-20-24V 10A / 12V 10A / 24V 20A / 12V 20A / 24V 1098 Washington Crossing Road Washington Crossing,
More informationUSER MANUAL. Blazer Vista 1000/1400/2000. Uninterruptible Power System
USER MANUAL Blazer Vista 1000/1400/2000 Uninterruptible Power System IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions for model Blazer Vista 1000/1400/2000
More informationInstalling the gate post bracket with the cardboard arm template
......... Installing the gate post bracket with the cardboard arm template... Installing gate posts brackets and arms for Push-to-Open or Pull-to-Open gates... Connection of Power Source 240Vac or Solar...
More informationPIXAPRO LTD. 50 Popes Lane, Oldbury, West Midlands, B69 4PA. INSTRUCTION MANUAL English. Company Registration No
PIXAPRO LTD. 50 Popes Lane, Oldbury, West Midlands, B69 4PA Tel: 0845 872 7904 Web: www.essentialphoto.co.uk E-mail: customerservice@essentialphoto.co.uk Company Registration No. 0760334 705-AD36C0-00
More informationPO Box 2484 Rowville Vic 3178
www.solar4rvs.com.au info@solar4rvs.com.au 0488 918 910 PO Box 2484 Rowville Vic 3178 1. Primary Functions and Features The Controller provides three primary functions: 1. The Maximum Power Point Tracking
More informationSpecification Sheet for 2D LED Light
Specification Sheet for 2D LED Light Product Features LED light source, green and energy-saving; IP54 bulkhead, available to replace a 2D fitting; PC housing and opal diffuser; 3 Hours emergency; Microwave
More informationASSEMBLY INSTRUCTIONS PRODUCT CODE: CAUTION: Carefully Read Instructions and Procedures for Safe Operation. 7' Diamond Peak LED Tree
7' Diamond Peak LED Tree ASSEMBLY INSTRUCTIONS MODEL NO: U11G684A-024-01 (WL-019) PRODUCT CODE: 140-034067-090 CAUTION: Carefully Read Instructions and Procedures for Safe Operation. Receipt of Purchase:
More informationMANUAL BAT/48342 IMPORTANT NOTE : BEFORE FIRST USE CHARGE THE JUMP STARTER WITH THE SUPPLIED CHARGER FOR AT LEAST 12 HOURS.
CONGRATULATIONS: You have purchased a carefully Swiss engineered, top quality product. Your engine starter is designed to give you the quality and convenience you expect in a jump starter. We have taken
More informationOPERATOR S MANUAL SINGLE PORT UNIVERSAL CAR CHARGER
OPERATOR S MANUAL SINGLE PORT UNIVERSAL CAR CHARGER P130 Fits Ryobi 7.2 volt-18 volt battery packs BATTERIES SOLD SEPARATELY Your battery charger has been engineered and manufactured to Ryobi s high standard
More informationMCC Automatic Start-Stop Microcomputer Charger Control
MCC Automatic Start-Stop Microcomputer Charger Control Installation & Operation Instructions Warning: Read ALL the instructions before starting. If anything is not clear, call your dealer or contact Arrgh!!
More informationUser Manual Solar Charge Controller 3KW
User Manual Solar Charge Controller 3KW Version: 1.3 CONTENTS 1 ABOUT THIS MANUAL... 1 1.1 Purpose... 1 1.2 Scope... 1 1.3 SAFETY INSTRUCTIONS... 1 2 INTRODUCTION... 2 2.1 Features... 2 2.2 Product Overview...
More informationLIFT 1500 VA UNINTERRUPTIBLE POWER SUPPLY UPS USER MANUAL
LIFT 1500 VA UNINTERRUPTIBLE POWER SUPPLY UPS USER MANUAL INTRODUCTION - LIFT 1500 VA Front Panel Back Panel 3 2 4 7 1 5 6 1. On/Off Button 2. AC Mode: Green Lighting 3. Battery Mode: Orange Flashing 4.
More informationOperators Guide: RoboSign Stop/Go Traffic Control System
Operators Guide: RoboSign Stop/Go Traffic Control System RoboSign Remote controlled Stop/Go temporary traffic control system Operators Guide Table of Contents Operators Guide: RoboSign Stop/Go Traffic
More informationRover Series. Rover 20A 40A Maximum Power Point Tracking Solar Charge Controller
Rover Series Rover 20A 40A Maximum Power Point Tracking Solar Charge Controller 0 2775 E. Philadelphia St., Ontario, CA 91761 1-800-330-8678 Version 1.5 Important Safety Instructions Please save these
More informationMaxLite LED Medium Area Light
General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions
More information