Legal notice. Legal notice

Size: px
Start display at page:

Download "Legal notice. Legal notice"

Transcription

1

2 Legal notice Legal notice All rights reserved to ELAU GmbH, also in case of patent right applications. No part of this documentation or the accompanying software and firmware may be reproduced, transferred, paraphrased, saved to a storage medium or translated to another language or computer language without the written consent of ELAU GmbH. Any possible measure was taken to ensure that this product documentation is complete and correct. However, since hardware and software are continuously improved, ELAU makes no representations or warranties with respect to the contents of this documentation. All information on our products in this manual are given purely for the purpose of product description and is not binding. Misprints, errors and modifications -without prior notice in the course of product development- are reserved. If details contained in this manual are explicitly a part of an agreement made with ELAU GmbH, then the details of the agreements in this manual are exclusively to determine the agreed condition of the object of agreement, on behalf of the 434 BGB (condition guarantee on behalf of legal regulations). Trademark PacDrive is a registered trademark of ELAU GmbH. All other trademarks mentioned in this documentation are the exclusive property of their manufacturers. ELAU GmbH Dillberg Marktheidenfeld, Germany Tel.: +49 (0) 9391 / Fax: +49 (0) 9391 / info@elau.de Internet: Page 2 PacDrive SH-Motor ELAU GmbH

3 Manufacturer's declaration Manufacturer's declaration According to the EC machine guidelines 98/37/EC ELN /02.08 page 1/1 The product we delivered: PacDrive SH-Motor is intended for installation in a machine. Commissioning is forbidden until it is established that the machine in which this product is to be installed complies with the provisions of the EC guideline. The manufacturer guarantees that the product delivered was manufactured in accordance with the applied harmonized standards / specifications. The following standards were applied: EN (2007) Safety of machinery: Electrical equipment of machines - General requirements EN (3/1994) Electromagnetic compatibility. Generic emission standard EN (3/2000) Electromagnetic compatibility. Resistance to jamming Manufacturer: ELAU AG Dillberg Marktheidenfeld, Germany Thomas Cord Chief Executive Officer ELAU GmbH PacDrive SH-Motor Page 3

4 Contents Contents 1 About this manual Introduction Symbols, designator and display format of safety notes Notes for working safely with the product Proper use Selection and qualification of personnel Residual risks System overview Features of the servo motors Designs PacDrive System Transport, storage, unpacking Transport Storage Unpacking Type plate Installation and maintenance Initial start-up Configuration, programming, diagnosis EMC Rules Maintenance, repair, cleaning Maintenance Repair Cleaning Spare part inventory Type code Device replacement SH Cable replacement Page 4 PacDrive SH-Motor ELAU GmbH

5 Contents 6 Technical data Technical information Definition of technical data Ambient conditions, approval Mounting arrangement and protection class Motor shaft and bearings Holding brake (optional) Data tables Technical features Motor options PacDrive SH-055-Motor (self-cooled) PacDrive SH-070-Motor (self-cooled) PacDrive SH-100-Motor (self-cooled) PacDrive SH-100-Motor (force-ventilated) PacDrive SH-140-Motor (self-cooled) PacDrive SH-140-Motor (force-ventilated) PacDrive SH-205-Motor (self-cooled) PacDrive SH-205-Motor (force-ventilated) Brake Fan cover Encoder Torque/speed characteristic curves Electrical connections Dimensions SH SH SH SH SH Appendix Contact addresses Product training courses Changes Fault report form ELAU GmbH PacDrive SH-Motor Page 5

6 1 About this manual 1 About this manual 1.1 Introduction Read and observe this manual before you work on the motor for the first time. Take particular note of the safety instructions (see 2.3 Residual risks). As described in section 2.4, only those persons who meet the "Selection and qualification of employees" are allowed to work on the motor. This manual is intended to help you use the motor and its intended applications safely and properly. By observing this manual, you will help to avoid risks, reduce repair costs and down times of the motor, increase the life span of the motor and increase reliability of the motor. A copy of this manual must always be available for personnel who are entrusted to work on the motor. Page 6 PacDrive SH-Motor ELAU GmbH

7 1.2 Symbols, designator and display format of safety notes 1.2 Symbols, designator and display format of safety notes This manual divides the safety instructions into four various categories. Hazards and possible results will be categorized using a certain combination of symbols and signal words. Symbol / Signal word Meaning Indicates an immediate hazardous situation that can lead to death or serious bodily injury if the safety regulations are not observed. Indicates a potentially hazardous situation that can lead to serious injury or death if the safety regulations are not observed. Indicates a potentially hazardous situation that may result in bodily harm if the safety regulations are not followed. Indicates a potentially dangerous situation that may result in property damage if the safety regulations are not observed. The following symbols and designators are used in this document: Symbol/Character Meaning Information Symbol: After this symbol, you will find important instructions and useful tips on using the components. Marker: After this symbol, you will find references for further information. Prerequisite symbol: This symbol indicates a prerequisite you have to fulfill before you start to implement an instruction. Activity symbol: After this symbol, you will find an instruction. Follow the instructions in sequence from top to bottom. Result symbol: The text after this symbol contains the result of an action. First level bullet point Second level bullet point. Orientation aid: Information serving as an orientation aid regarding the section's contents follows this symbol. bold If the descriptive text contains keywords, such as parameters, they are highlighted in bold. Program code is written in a different font. ELAU GmbH PacDrive SH-Motor Page 7

8 2 Notes for working safely with the product 2 Notes for working safely with the product 2.1 Proper use The ELAU Motor is are state of the art and conform to recognized technical safety regulations. Nevertheless the use of the motor can present a hazard to life and limb or cause property damage. The following section contains general requirements for safe work with to the motor. Each person who uses or works on the motor must read and follow these requirements. Use What do you need to observe? Flawless State Only original equipment must be used Protection measures provide for Forbidden environments The ELAU Motor is are intended to be installed in a machine or assembled with other components to form a machine or system. The ELAU Motor is part of the PacDrive System. The PacDrive System is the complete control system comprising of PacDrive Controller of C- or P-Series, PacDrive Servo Amplifier MC-4 or Power Supply PS-5 with Distribution Box DB-5 and PacDrive Motor. Proper use includes that you observe the following points and the resulting rules: The regulative, warning and instruction signs on the connected components and in the switching cabinet The warning instructions on the motor on the connected components and in the switch cabinet The inspection and maintenance instructions The operating instructions of the other components All other documentation Operate the motor only when they are in a flawless technical condition. Observe the regulations, act with safety and hazards in mind If circumstances occur that impact safety or cause changes in the operating performance of of the motor, switch the motor off immediately and contact the responsible service staff. Use only the options and mounting parts specified in the documentation and no thirdparty devices or components that are not expressly approved ELAU recommends.. Do not change or modify the motor inappropriately. Before installing, provide for appropriate protective devices in compliance with the local and national standards. Do not commission components without accordant protective devices. After installation, commissioning or repair, test the protective devices used. The ELAU components must not be used in the following environments: In dangerous (explosive) atmospheres In mobile, movable or floating systems In life support systems In domestic appliances Page 8 PacDrive SH-Motor ELAU GmbH

9 2.1 Proper use Installation and operating ambient You may only use them in accordance with the installation and operating conditions described in the documentation. The operating conditions at the installation location must be checked and maintained in accordance with the required technical data (performance data and ambient conditions). Commissioning is prohibited until it is guaranteed that the usable machine or system in which the motor is installed meets all requirements of EC Directive 98/37/EC (machinery directive). In addition, the following standards, directives and regulations are to be observed: DIN EN Safety of machinery: Electrical equipment of machines DIN EN 292 Part 1 and Part 2 Safety of machinery: Basic Concepts, General Principles for Design DIN EN Electronic equipment for use in high-current electrical systems EMC directive 89/336/EEC : DINT The generally applicable local and national safety and accident prevention regulations. The rules and regulations on accident prevention and environmental protection that apply in the country where the product is used The applicable laws and ordinances ELAU GmbH PacDrive SH-Motor Page 9

10 2 Notes for working safely with the product 2.2 Selection and qualification of personnel Target Audience of this manual Specialist or trained staff This manual is geared exclusively toward technically qualified personnel, who have detailed knowledge in the field of automation technology. The description is mainly for construction and application engineers from the engineering and electro-technics division as well as service and commissioning engineers. Work on the motor may only be carried out by qualified professional or by trained staff under the instruction and supervision of a qualified person in accordance with electrical regulations. Professionals are those persons who, as a result of their training, knowledge, and experience and knowledge of the pertinent regulations, can evaluate the transferred work, recognize the meaning of the safety instructions and implement them consistently, recognize possible hazards and take appropriate safety measures. Page 10 PacDrive SH-Motor ELAU GmbH

11 2.3 Residual risks 2.3 Residual risks Health risks arising from to the motor have been reduced by means of safety technology and design engineering. However a residual risk remains, since the motor works with electrical voltage and electrical currents. If activities involve residual risks, a specific note is made at the appropriate points. The note details the potential hazard and its effects and describes preventative measures to avoid it. Mounting and handling WARNING Risk of injury during handling Risk of bodily harm from crushing, shearing, cutting and hitting Observe the general construction and safety regulations for handling and mounting. Use suitable mounting and transport equipment correctly and use special tools if necessary. Prevent clamping and crushing by taking appropriate precautions. Wear suitable protective clothing (e.g. safety goggles, safety boots, protective gloves) if necessary. Do not stand under suspended loads. High leakage current Leakage current greater than 3.5 ma. Risk of death DANGER Make sure that the device is firmly connected to the power supply (in accordance with DIN EN Equipment of High-Voltage Systems). Touching hot surfaces The housing temperature of the motor exceeds 70 C during nominal operation. As warning, the symbol shown here is affixed on the motor. WARNING Hot surfaces Risk of burns from surface temperatures up to 100 C. Wear safety gloves or wait until the surface temperature has cooled to allow safe contact! Attach protective cover or touch guard. ELAU GmbH PacDrive SH-Motor Page 11

12 2 Notes for working safely with the product Touching electrical parts If parts have contact with voltages greater than 50 V, it can be a hazard for personnel. When electrical devices are in operation, certain parts of these devices must necessarily carry dangerous voltages. High voltage Electric shock, fire or explosion DANGER Observe the general construction and safety regulations for working on highcurrent electrical systems. After installation, check the firm connection of the ground conductor to all electrical units to ensure that connection complies with the connection diagram. Always make sure that the ground conductor is connected when operating electrical components. Disconnect devices with a voltage greater than 50 volts from the power supply before working on electrical parts. Prevent the unit from being switched back on. Wait at least 5 minutes after switching off before accessing the components. Before accessing the device, check the voltage with a voltage meter to be sure that the voltage is less than 50 volts. Do not touch the electrical connection points of the components when the device is switched on. Before enabling the device, safely cover the live components to prevent contact. Provide for protection against indirect contact (DIN EN 50178, Section 5.3.2). Protection against magnetic and electromagnetic fields Magnetic and electromagnetic fields that are in immediate environments of electrical conductors and permanent motor magnets represent a serious health hazard to persons with heart pacemakers, metal implants and hearing aids. WARNING Health risk posed by risk groups in the proximity of electrical equipment. Do not allow personnel with pacemakers or similar sensitive implants to work on motors! Page 12 PacDrive SH-Motor ELAU GmbH

13 2.3 Residual risks Dangerous movements There can be different causes of dangerous movements: Missing or faulty homing of the robot mechanics Wiring or cabling errors Errors in the application program Component errors Error in the measured value and signal transmitter Operation error Personal safety must be guaranteed by primary equipment monitoring or measures. Don't just rely on the internal monitoring of the drive components. Monitoring or measures should be implemented based on the specific characteristics of the equipment, in line with a risk and error analysis. This includes the valid safety regulations for the equipment. Under no circumstances must the technical safety devices be removed. Do not make any modifications to a protective device that may put it out of operation. Protect existing work stations against unauthorized operation. Effectively restrict access to the control terminals to allow access only to authorized persons. DANGER Dangerous movements Risk of death, serious injury or property damage! Prevent entry to a danger zone, e.g. by means protective fencing, mesh guards, protective covers, or light barriers. Ensure the protective devices are properly dimensioned. Position EMERGENCY OFF switches so that they are easily accessible and can be reached quickly. Check the functionality of EMERGENCY OFF equipment before start-up and during maintenance periods. Prevent unintentional start-ups by disconnecting the drives from power supply using the EMERGENCY OFF circuit or using a safe start-up lock out. Before accessing the drives or entering the danger zone, safely bring the drives to a stop. While working on the system, power down the electrical equipment using the main switch and prevent it from being switched back on. Before working on the system, secure it against start-up. Avoid operating high-frequency, remote control, and radio devices close to the system electronics and their feed lines. Prior to the initial start-up, check the system and the installation for possible malfunctions in all usage scenarios. If necessary, carry out a special EMC check of the system. ELAU GmbH PacDrive SH-Motor Page 13

14 3 System overview 3 System overview 3.1 Features of the servo motors The high dynamic brushless synchronous AC servomotors of the SH series are permanently energized machines that are specially designed for high dynamic positioning tasks. The low inherent moment of inertia in comparison to other AC servomotors not only ensures excellent acceleration values in connection with high load capacity, it also lowers energy consumption and heat loss resulting in the motor. The rotor position is determined using an integrated measuring system. The brushless principle described above makes the drives extremely robust and low-maintenance. The motors have the following features: High operating reliability Low-maintenance Overload protection using an integrated temperature sensor (external evaluation required) High power density High dynamic response High overload capability Large torque range Sinusoidal EMC High-voltage technology = low currents Low mass moment of inertia Motor connections use round connector or terminal box Fast and simple commissioning thanks to the electronic type plate in the SinCos encoder Page 14 PacDrive SH-Motor ELAU GmbH

15 3.2 Designs 3.2 Designs Motor feedback SinCos encoder single turn SinCos multiturn encoder Brake No holding brake (standard) With holding brake (optional) for securing the axis in the deactivated motor Output shaft Smooth shaft (standard) Shaft with round-ended feather key (optional) Miscellaneous The SH-motors are also available with a forced cooling fan Additional cooling systems upon request 3.3 PacDrive System Figure 3-1: PacDrive System Overview ELAU GmbH PacDrive SH-Motor Page 15

16 3 System overview PacDrive Controller Family The PacDrive Controller, microprocessor-based control hardware with the VxWorks real-time operating system, centrally implements the PLC and motion functions. A PacDrive Controller synchronizes, coordinates, and creates the motion functions for maximum 8 drives for the PacDrive Controller C200 2 drives for the PacDrive Controller C200 A2 16 drives for the PacDrive Controller C400 8 drives for the PacDrive Controller C400 A8 99 drives for the PacDrive Controller C600 of a food and packaging machine. Many different HMIs are used for the HMI tasks. Whether it is low-cost clear text or IPC, it is no problem for the flexible PacDrive Controller. The PacDrive P600 controller is additionally equipped with a full-fledged PC. Due to its PC-based architecture, it can perform HMI tasks with no problem in addition to the usual motion functions. PacDrive Servo Amplifier MC-4 and The MC-4 digital Servo Amplifier features compact, closed, wall-mountable construction as well as state of the art technology. For the innovative MC-4, the power supply unit, the final stage and the software servo regulator for an axis are housed in a spacesaving housing. Because it communicates with the PacDrive Controller exclusively via fiber optic cable, it is also suitable for peripheral layout. It does not require a user program, processes single or multi-turn encoders, and configures itself using the electronic type plate in the SH-Motor. Highlights of the PacDrive MC-4 World voltage range Integrated power supply unit Max. 34.5/69 kva output Automatic motor detection Minimal design Safety input inverter enable 250 % overload Integrated SERCOS interface Page 16 PacDrive SH-Motor ELAU GmbH

17 3.3 PacDrive System Highly dynamic AC Servo Motors SH-Motor The AC Servo Motors of the SH series meet the highest demands on dynamics and precision. Five flange sizes with different grades of torque offer the right drive solution for virtually any application. New winding technology with single tooth winding enables compact sizes and reduces production costs compared to traditional motors. Due to its low moment of inertia compared to other AC servo motors, and in conjunction with the high overload capability, the SH-Motor meets all requirements in terms of accuracy, dynamics and profitability. SH-Motors are compatible with SM motors and are available in five different flange sizes: SH-055 SH-070 SH-100 SH-140 SH-205 Brief summary of technical data: Developed for the highest dynamics and precision single tooth winding Compact size High power density Low internal moment of inertia High overload capability High resistance to winding damages Low detent torque ELAU GmbH PacDrive SH-Motor Page 17

18 4 Transport, storage, unpacking 4 Transport, storage, unpacking 4.1 Transport Avoid heavy shocks and/or vibrations during transport. Check the units for visible transport damage and inform the shipping company immediately if necessary. 4.2 Storage 4.3 Unpacking Store devices in a clean, dry room. The air temperature at the storage location must be between - 25 C and +70 C. Possible temperature variations at the storage location must be maximum 30 K per hour. Remove the packaging. Check that delivery is complete. Check the delivered goods for transport damage. 4.4 Type plate Figure 4-1: Type plate on the SH-Motor Page 18 PacDrive SH-Motor ELAU GmbH

19 4.4 Type plate Figure 4-2: Type plate of an SH-Motor Label Meaning SH070/60010/0/1/00/00/10/11/00 Motor type, see type code ID no. Item no. P N Rated power I 0 Standstill current I max Peak current n N Rated motor speed n max Mechanical limit velocity M 0 Standstill torque SN Serial Number IP Protection class Th.- Cl. Insulation material class of the motor UBr Brake measurement voltage PBr Brake measurement power MBr Brake measurement torque DOM Date of manufacture HW Hardware index Exxxxxx Approval number cul Thermo Design of the temperature sensor cul cul mark CE CE mark Table 4-1: Explanation of the type plate ELAU GmbH PacDrive SH-Motor Page 19

20 5 Installation and maintenance 5 Installation and maintenance 5.1 Initial start-up For warranty reasons, we strongly recommend that you contact ELAU personnel for initial start-up. The ELAU personnel will check the equipment, determine the optimal configuration and instruct the operating staff. How to check the shipment and the installation location: Testing Check that delivery is complete. Check device for sound condition. Only operate undamaged devices. Check data against type plates. Electromagnetic fields Interference or system breakdown CAUTION Use mains filters and motor filters in accordance with the combination of the servo amplifier/motor, cable length and mains or motor filter.. Observe requirements for the installation location. Observe requirements for the protection class and the EMC rules. How to check the brake (if any): Step 1: Make sure that the motor is off-circuit. Try to turn the motor shaft manually. When off-circuit, it should not be possible to turn the shaft, or at least you should feel a very high resistance. If the shaft can be turned without "perceptible" resistance, the brake is defective. Step 2: Connect the control voltage to bleed the brake (pins A and B for P30 connector; pins + and - for P70 connector). Try to turn the motor shaft manually. When the control voltage is connected, you should be able to turn the shaft. Please note the manuals for the servo amplifiers (MC-4). Then install motor. Page 20 PacDrive SH-Motor ELAU GmbH

21 5.1 Initial start-up How to wire the motor: Connect devices, beginning with the ground conductor. Check if the terminals are securely fastened and the necessary cable cross sections are correct. Leakage current greater than 3.5 ma. Risk of death DANGER Make sure that the device is firmly connected to the power supply (in accordance with DIN EN Equipment of High-Voltage Systems). Tighten the locking nut with a tightening torque of 2 Nm for the power connector P30 (1) (7-8 Nm for P70) and 2.5 Nm for the signal connector (3) Figure 5-1: Electrical connections - SH motor 1 Brake/temperature/motor connection 2 Additional ground connection 3 Encoder Connection Check that shielding is completely correct. Eliminate the possibility of short circuits and interruptions. Check the continuity of the protective conductor system. ELAU GmbH PacDrive SH-Motor Page 21

22 5 Installation and maintenance Option 1: (recommended configuration) How to connect the motor to the protective conductor: Connect the motor with the protective conductor system using the additonal grounding connection on the motor flange (1). 1 Figure 5-2: Ground connection on the motor Connection cross section of the grounding conductor appropriate for the mains connectionwiring has to be chosen for the connected upstream servo amplifier of the motor. (DIN EN :2006, Section 5.2 Table 1). Use a grounding conductor with a minimum connection cross-section of 4 mm 2 (DIN EN :2008, section ). Option 2: Connect the motor to the grounded machine bed immediately above the motor flange. The size of the connection should be such that the ampacity is not impaired by mechanical, chemical or electromechanical factors. According to DIN EN :2006 Section 18.2, the correct grounding of the motor has to be checked respectively proven on the completely installed machine at the installation location at all times. How to finish the initial start-up: Check safety functions such as the EMERGENCY OFF switch. Resume system operation according to the operating manual (from the packaging machine manufacturer and servo amplifier). Page 22 PacDrive SH-Motor ELAU GmbH

23 5.2 Configuration, programming, diagnosis 5.2 Configuration, programming, diagnosis The motor is matched by ELAU. The customer need not perform any aligning. The respective servo amplifier documentation tells you how to adjust a servo amplifier to a motor. Error diagnosis and monitoring of operating statuses are executed within the ELAU controls. See also the relevant descriptions for these. ELAU GmbH PacDrive SH-Motor Page 23

24 5 Installation and maintenance 5.3 EMC Rules To control and regulate the motors, the mains voltage is stored by rectification in the DC bus of the servo amplifier. This stored energy is supplied to the motor by targeted switching on and off using six semiconductor switches. The steep increase/decrease in voltage places considerable demands on the dielectric strength of the motor winding. An important additional aspect to observe is the electromagnetic compatibility (EMC) with other system components. The high rate of change of the clocked voltage generates harmonics of great intensity up into the high frequency range. Electromagnetic fields! Interference or breakdown of system possible! CAUTION During installation, select the HF grounding option with the lowest ohm load (e.g. an uncoated mounting plate on the switching cabinet). Ensure largest possible contact surface area (skin effect). If necessary remove any existing paint to ensure contact. Lay the grounding in a star configuration from the Central-Earthing-Point. Current loops of earthing are prohibited and can cause unnecessary interference. Only use shielded cables. Supply large-area shielding bridges. Do not connect shields via the PIN contacts of connectors. Observe the circuit suggestions. Shorten the motor cables to a minimal length. Do not lay any cable loops in the switching cabinet. In conjunction with electronic controllers, do not switch inductive loads without suitable interference suppression. Provide for suitable interference suppression. For direct current operation, this is achieved by using recovery diodes and protector type-based, industry-standard quenching circuits during alternating current activity. Arrange the interference suppression immediately at the point of inductivity, as otherwise even more interference may be generated by the shock of the switching current on the interference suppression lines. Avoid sources of interference instead of eliminating the effects of existing interference. Do not arrange contacts with unsuppressed inductive loads in one room with PacDrive Components. The same applies for connection lines that do not lead suppressed, switched inductances and lines that run parallel to them. Isolate the controller from such interference sources using a Faraday cage (separately partitioned switching cabinet). Mains filters and motor filters may by used depending on the combination of the servo amplifier/motor and the cable length. Page 24 PacDrive SH-Motor ELAU GmbH

25 5.4 Maintenance, repair, cleaning 5.4 Maintenance, repair, cleaning Maintenance Check brake function during operation at least once a year Repair Proceed as follows in case of repair: Cleaning Fill in the fault report form in the attachment (can also be sent per Fax). When possible, replace defective parts (see 5.7 Device replacement). CAUTION To avoid damage in transport and to guarantee that the repair process flows smoothly, follow the method outlined in the chapter on "Device Replacement". Send the defective part back to ELAU. The standard cooling method of the motor is by natural convection. Therefore, keep the motor surfaces free from dirt. How to remove dust and foreign objects from to the motor: CAUTION Liquids can seep in due to improper cleaning. Damage of the component Use cleaning processes appropriate to the protection class of the motor. Switch motor voltage free. Remove motor. Then blow out motor with dry pressurized air (max. 1 bar). ELAU GmbH PacDrive SH-Motor Page 25

26 5 Installation and maintenance 5.5 Spare part inventory Keep a stock of the most important components to ensure that the equipment is functioning and ready for operation at all times. You may only exchange units with the same hardware configuration and the same software version. Indicate the following information on the spare part order: Item name: e.g. PacDrive SH Item no.: e.g XXX Hardware code: not specified Software version: not specified You will find this information on the type plate and in the controller configuration of the PacDrive System. Page 26 PacDrive SH-Motor ELAU GmbH

27 5.6 Type code 5.6 Type code ELAU GmbH PacDrive SH-Motor Page 27

28 5 Installation and maintenance 5.7 Device replacement Faulty replacement or opening of the motor Damage of the motor Manufacturer's warranty expired CAUTION Do not open motor to put it into operation or replace it. In addition to the following instructions, you must observe the machine manufacturer's specifications when replacing the motor. High voltage Electric shock, fire or explosion DANGER Before working on electrical equipment, always put the main switch in the "OFF" position and secure it against being switched back on. Before working on the equipment, discharge the DC bus and use a voltage meter to make sure that there is no voltage. Make sure that the drives are at a standstill because potentially fatal voltage can occur on the motor lines in generator operation. Disconnect power connector cables only when the system is deactivated. Plug in power connector cables only when the system is deactivated. If you are not using prefabricated ELAU cables, check that the assignment of the new cables complies with the connection diagram of the machine manufacturer. Electrostatic discharge. Damage to component CAUTION Touch circuit boards only on edges. Do not touch any of the circuit points or components. Discharge any existing static charge by touching a grounded metallic surface such as a grounded housing. Prevent electrostatic charges; e.g., by wearing appropriate clothing. Page 28 PacDrive SH-Motor ELAU GmbH

29 5.7 Device replacement SH How to replace the motor: Take preliminary measures. Put main switch in "OFF" position to free system of voltage. Prevent main switch from being switched back on. Mechanical force Damage to the encoder system CAUTION Prevent impacts on the motor shaft when removing and attaching couplings to the motor shaft, as this could damage the encoder. Use appropriate tools, such as an extractor. Avoid mechanical damage to the coating of the motor housing. Do not use any cleaning fluid, as this will damage the motor's aluminum housing. WARNING Unintentional axis movements due to loss of references in case of a motor replacement Risk of accident For servo axes with indirect distance measuring systems, restore the reference to the machine coordinate system via the motor encoder every time a motor is replaced. Replace the drive according to the machine manufacturer's specifications. Connect earth cable and tighten with a 2.8Nm torque. Insufficient shielding/grounding Hazard to the drive DANGER Operate the drive only with fixed cover and cable gland. Connect additional grounding. Execute the motor grounding for the second grounding connection as well. Make sure that the grounding resistance does not exceed 0.1 Ohm. ELAU GmbH PacDrive SH-Motor Page 29

30 5 Installation and maintenance Figure 5-3: Second ground connection 1 Brake / temperature / motor connection cable 2 Additional ground connection 3 Encoder Connection 5.8 Cable replacement High voltage Electric shock, fire or explosion DANGER Before working on electrical equipment, always put the main switch in the "OFF" position and secure it against being switched back on. Before working on the equipment, discharge the DC bus and use a voltage meter to make sure that there is no voltage. Make sure that the drives are at a standstill because potentially fatal voltage can occur on the motor lines in generator operation. Disconnect power connector cables only when the system is deactivated. Plug in power connector cables only when the system is deactivated. If you are not using prefabricated ELAU cables, check that the assignment of the new cables complies with the connection diagram of the machine manufacturer. Replacing cables Put main switch in "OFF" position to free system of voltage. Prevent main switch from being switched back on. Exchange the cable according to the machine manufacturer's specifications. Page 30 PacDrive SH-Motor ELAU GmbH

31 6.1 Technical information 6 Technical data 6.1 Technical information Definition of technical data Abbreviation Unit Explanation I 0 [A rms ] Standstill current Standstill current Effective value of the motor current at standstill torque M0 I N [A rms ] Rated current Effective value of the motor current at rated torque M N I max [A rms ] Peak current Effective value of the motor current at peak torque M max J M [kgcm 2 ] Rotor moment of inertia The rotor inertia refers to a motor without brake. k T [Nm/A rms ] Torque constant Quotient from standstill torque M 0 and standstill current I 0 (at 120 C winding temperature) m [kg] Mass Motor mass without brake and without fan Motor mass without brake and without fan M 0 [Nm] Standstill torque; continuous torque (100% ED) at 5 min -1 At an ambient temperature of 40 C and a winding temperature of 120 C M N [Nm] Rated torque, continuous torque (100% ED) at n N Due to motor speed-dependent losses less than M 0. At an ambient temperature of 40 C and a winding temperature of 120 C. M max [Nm] Peak Torque The maximum torque that the servo motor can briefly deliver to the output shaft. n N [min-1] Rated motor speed n max [min-1] Mechanical limit velocity P N [kw] Mechanical rated power (power delivered to the shaft) At the rated motor speed and load with the rated torque R U-V, 20 [Ω] Resistance of a motor winding Resistance between two phases at a winding temperature of 20 C. L U-V [mh] Winding inductance between two phases k E [V rms /kmin -1 ] Voltage constant; induced voltage between two phases at 1000 min -1 V [m/s 2 ] Maximum vibration (all directions) Y [m/s 2 ] Maximum shock (all directions) T TK [ C] Response limit temperature sensor t th [min] Thermal time constant p Pole pair number Table 6-1: Physical sizes with units and explanations ELAU GmbH PacDrive SH-Motor Page 31

32 6 Technical data Ambient conditions, approval If you operate the motors outside the specified rated data, the motors may be damaged. The following section describes the ambient temperature and geographic installation altitude factors. Parameters Permissible ambient temperature from 0 to 1000 m above sea level Humidity Isolation class Approvals CE Table 6-2: Ambient conditions, approvals Value 0-40 C At higher temperatures, rated current reduction by 1% per C Class F according to DIN 40040, condensation not permitted F Increased ambient temperature When operating the motor. make sure that power loss (heat) from the motor is diverted sufficiently. If the structure is thermally isolated or convection cooling is insufficient, reduce the motor power accordingly. Power reduction depending on ambient temperature The specified ambient temperature for the motor is 40 C. At an increased ambient temperature up to a maximum of 55 C, the rated current drops by 1% per C. Figure 6-1: Power reduction at increased ambient temperature In the limit range of 40 C to 55 C, the performance data is multiplied by the determined load factor for the ambient temperature. Page 32 PacDrive SH-Motor ELAU GmbH

33 6.1 Technical information Low Air pressure Power reduction depending on geographic altitude of installation In environments lower than 1000 meters above sea level, no rated value power losses with the motors are expected based on the different air pressure ratio. At altitudes greater than 1000 meters above sea level and less than 3000 meters above sea level, available performance drops as shown in the diagram below. Figure 6-2: Power reduction when the installation altitude is exceeded In the limit range of 1000 m to 3000 m, the performance data is multiplied by the load factor determined for the installation altitude. You must multiply both load factors by the power values when reducing the power that resulted from both causes. ELAU GmbH PacDrive SH-Motor Page 33

34 6 Technical data Mounting arrangement and protection class The drive protection class depends on the mounting arrangement. The mounting flange for all drive types is designed in such a way that the installation type is possible according to the types of construction IM B5 (mounting flange with through hole). By the DIN Part 1 (Edition 08.77) the drives can be mounted to the machine according to the following listing types.: Figure 6-3: Drive installations CAUTION Impermissible mounting position and penetrating liquids Motor damage Liquids must be prevented from remaining on the motor shaft over an extended period of time when mounting the motor in the mounting position IM V3. It also cannot be ruled out that liquids penetrate the motor housing along the motor shaft even if a shaft sealing ring has been installed. Motor part Protection class Mounting position Shaft IP 50 IP 54 IP 65 Surface/connections IP 65 IP 67 Table 6-3: Protection class of SH-Motor IM V3 IM B5, IM V1 IM V3, IM V1, IM B5 (shaft sealing ring) IM V3, IM V1, IM B5 IM V3, IM V1, IMB5 (positive pressure) Motor part Protection class Mounting position Fan (optional) IP 20 IM V1, IM V3, IM B5 Table 6-4: Protection class of the SH-Motor (option) Page 34 PacDrive SH-Motor ELAU GmbH

35 6.1 Technical information Positive pressure The SH-Motor with optional positive pressure The optional positive pressure is suitable for using the motor in environments that place high requirements on protection against penetrating liquids. For this, it should be taken into account that liquids with creep properties other than water are used, and that when the drives heats overpressure is caused, just as when the drive cools, underpressure is caused, which both provides favorable conditions for the penetration of liquids. Continuous protection against the penetration of liquids and gases is achieved when the housing is held under a slight overpressure with positive pressure. The air consumption is negligible since the system is closed. Properties Single Body Value Comment Pressure bar recommended Pressure 0.4 bar Max. Operating conditions Dust-free using suitable micro filters Operating conditions Oil-free using appropriate oil separators Relative humidity % Table 6-5: Operating conditions for the usage of positive pressure Figure 6-4: Positive pressure connection on the SH-Motor ELAU GmbH PacDrive SH-Motor Page 35

36 6 Technical data Motor shaft and bearings Smooth Shaft end (Standard) Shaft end with round-ended feather key according to DIN 6885 Design of the shaft end With a non-positive connection, torque transmission must be achieved only by surface pressure. That ensures safe power transmission without backlash. Shaft connections with feather keys are positive. The feather key seating can deflect under continuous strain with changing torques and prolonged reverse operation, causing backlash. As a result, rotational quality is reduced due to backlash. Increasing deformation can lead to the feather key breaking and damage to the shaft. This type of shaft nub connection is only suitable for low requirements. Therefore, we recommend using smooth shaft ends. Bearing The B-side bearing is designed as a fixed bearing and the A-side bearing (shaft output) as a floating bearing. Permissible shaft load In case of technical correct use, the life of drives is limited by the bearing life. The customer may not replace the bearing, as the measuring systems integrated in the drive must then be reinitialized. Figure 6-5: Definition of shaft load Page 36 PacDrive SH-Motor ELAU GmbH

37 6.1 Technical information Motor 1000 min min min min min min min min -1 SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH Table 6-6: Permissible radial force F radial [N] Basis for calculation: The permissible axial force F radial [N] is calculated according to: F axial = 0.2 x F radial Nominal bearing life L 10h = 20,000 h for a shaft without feather key nut (for operating hours at a 10% failure probability) Ambient temperature = 40 C (approx. 100 C storage temperature) Peak torque = 10 % ED Nominal torque = 100 % ED ELAU GmbH PacDrive SH-Motor Page 37

38 6 Technical data Holding brake (optional) Operating principle To hold the axes without play during standstill or when the system is deactivated, you can order the servomotors with a holding brake. The permanent magnetic brake is a continuous surface unit with which the force of the permanent magnetic field is used for generating the braking effect (system opens electromagnetically). The permanent magnetic field is compensated by an electromagnetic field for cancelling the braking effect. Safe release without detent torque that is independent of the mounting position is ensured by a steel spring. In addition to frictionless axial armature movement, it also offers the transmission of braking torque without backlash. The motors are provided with a varistor for reducing excess voltage when the brake is engaged. DANGER Dangerous movements Risk of injury by jamming or shearing of body parts The holding brake alone does not ensure protection to persons. To ensure persons are protected, higher-level constructive measures such as mesh guards or a second brake are necessary. CAUTION Engaging of the holding brake while machinery is in motion Premature wear of the holidng brake Use the holding brake only when the axis is at a standstill. Use the holding brake to brake an axis only in EMERGENCY STOP situations. The number of emergency stops is limited by the size of the external mass used. Regrind the holding brake if a motor was stored for over 2 years before mounting. How to regrind the holding brake: High voltage Risk of death CAUTION Grind the holding brake only when the motor is removed. Move motor manually when the holding brake is closed by approx. 50 revolutions. The holding brake is now ready for operation. Page 38 PacDrive SH-Motor ELAU GmbH

39 6.2 Data tables 6.2 Data tables Technical features Motor type Magnet material Designation Isolation class (according to DIN VDE 0530) Lubricant (according to FDA standard for servomotors) Design (according to DIN ) Protection class (according to EN 60529) Description Permanent magnet energized three-phase synchronous servomotor Neodymium iron boron (NdFeB) Heat class F (155 C) Klübersynth UH food safe gearbox grease IM B5, IM V1, IM V3 IP50 IP65 (with optional shaft sealing ring) (Mounting position IM V3 shaft sealing ring from FPM (Viton) required) Cooling Self-cooling, permissible ambient temperature up to 40 C Motor coating, approval Temperature monitoring Shaft end Rotational accuracy, concentricity, Axial runout (according to DIN ) Balancing quality (according to DIN ISO 1940) G 2.5 Installed measuring system Connection system Powder coating, acrylic resin-based Motor coating RAL 9005 Three-core PTC thermistor in the stator winding, switching temperature 130 C Cylindrical shaft end according to DIN 748 with/without round-ended feather key Tolerance N (normal) SinCos SKS 36, SKM 36 with Hiperface interface Round connector - straight (IP67) - angular, pivoted (IP67) - terminal box Motor options Motor shaft Brake Stainless steel shaft Designation Description Standard shaft with round-ended feather key according to DIN 6885 T1 Electromagnetic/permanently magnetic holding brake Stainless steel shaft with/without round-ended feather key Protection class housing Positive pressure connection (IP 67) Cooling - Air cooling (fan cover) - Flange cooling (in preparation) Table 6-7: General technical data of the options ELAU GmbH PacDrive SH-Motor Page 39

40 6 Technical data PacDrive SH-055-Motor (self-cooled) Designation Abbreviation [unit] SH SH SH General data Standstill torque M 0 [Nm] Peak Torque M max [Nm] Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-8: Technical data SH-055 Page 40 PacDrive SH-Motor ELAU GmbH

41 6.2 Data tables PacDrive SH-070-Motor (self-cooled) Designation Abbreviation [unit] SH SH SH General data Standstill torque M 0 [Nm] Peak Torque M max [Nm] Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-9: Technical data SH-070 ELAU GmbH PacDrive SH-Motor Page 41

42 6 Technical data PacDrive SH-100-Motor (self-cooled) General data Designation Abbreviation [unit] SH SH SH SH Standstill torque M 0 [Nm] Peak Torque M max [Nm] Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-10: Technical data SH-100 (self-cooled) Page 42 PacDrive SH-Motor ELAU GmbH

43 6.2 Data tables PacDrive SH-100-Motor (force-ventilated) General data Designation Abbreviation [unit] SH SH SH Standstill torque M 0 [Nm] Peak Torque M max [Nm] Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-11: Technical Data SH-100 (force-ventilated) SH ELAU GmbH PacDrive SH-Motor Page 43

44 6 Technical data PacDrive SH-140-Motor (self-cooled) General data Designation Abbreviation [unit] SH SH SH Standstill torque M 0 [Nm] Peak Torque M max [Nm] Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-12: Technical data SH-140 (self-cooled) SH Page 44 PacDrive SH-Motor ELAU GmbH

45 6.2 Data tables PacDrive SH-140-Motor (force-ventilated) General data Designation Abbreviation [unit] SH SH SH Standstill torque M 0 [Nm] Peak Torque M max [Nm] 27, Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-13: Technical data SH-140 SH ELAU GmbH PacDrive SH-Motor Page 45

46 6 Technical data PacDrive SH-205-Motor (self-cooled) Designation Abbreviation [unit] SH SH SH General data Standstill torque M 0 [Nm] Peak Torque M max [Nm] Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-14: Technical data SH-205 (self-cooled) Page 46 PacDrive SH-Motor ELAU GmbH

47 6.2 Data tables PacDrive SH-205-Motor (force-ventilated) General data Designation Abbreviation [unit] SH SH Standstill torque M 0 [Nm] Peak Torque M max [Nm] Mains voltage U N = 230 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Mains voltage U N = 400 V Rated motor speed n N [min-1] Rated torque M N [Nm] Rated power P N [kw] Electrical data Pole pair number p Motor winding switch Y Y Y Torque constant (120 C) k T [Nm/Arms] Winding resistance Ph-Ph (20 C) R U-V [Ohm] Winding inductance Ph-Ph L U-V [mh] Counter EMC Ph-Ph (120 C) k E [V rms /kmin -1 ] Standstill current I 0 [A rms ] Rated current I N [A rms ] Peak current I max [A rms ] Mechanical data Moment of inertia of the rotor J M [kgcm²] Maximum permissible mechanical motor speed n max [min-1] Maximum shock (all directions) S [m/s 2 ] Maximum vibration V [m/s 2 ] Weight m [kg] Thermal data Thermal time constant t th [min] Response limit thermal contact T TK [ C] Table 6-15: Technical Data SH-205 (force-ventilated) SH ELAU GmbH PacDrive SH-Motor Page 47

48 6 Technical data Brake The times mentioned in the following apply when switching in the direct current circuit, when the motor is warm, and at the rated voltage. The disconnection time is the period from the activation of the current to the dying out of the torque to 10% the rated torque of the brake. The coupling time counts as the period from when the current is switched off to the attainment of the rated torque. The holding brake is designed differently for each series: Technical data of the holding brake of the SH-055 Parameters SH SH SH Unit Static holding torque at 120 C [Nm] Coupling time [ms] Disconnection time [ms] Mass Motor mass without brake and without fan [kg] Moment of inertia [kgcm2] Rated output [W] Rated voltage 24 +6/-10% 24 +6/-10% 24 +6/-10% [VDC] Table 6-16: Technical data of the holding brake of the SH-055 Technical data of the holding brake of the SH-070 Parameters SH SH SH Unit Static holding torque at 120 C [Nm] Coupling time [ms] Disconnection time [ms] Mass Motor mass without brake and without fan [kg] Moment of inertia [kgcm2] Rated output [W] Rated voltage 24 +6/-10% 24 +6/-10% 24 +6/-10% [VDC] Table 6-17: Technical data of the holding brake of the SH-070 Technical data of the holding brake of the SH-100 Parameters SH SH SH SH Unit Static holding torque at 120 C [Nm] Coupling time [ms] Disconnection time [ms] Mass Motor mass without brake and without fan [kg] Moment of inertia [kgcm2] Rated output [W] Rated voltage 24 +6/-10% 24 +6/-10% 24 +6/-10% 24 +6/-10% [VDC] Table 6-18: Technical data of the holding brake of the SH-100 Page 48 PacDrive SH-Motor ELAU GmbH

49 6.2 Data tables Technical data of the holding brake of the SH-140 Parameters SH SH SH SH Unit Static holding torque at 120 C [Nm] Coupling time [ms] Disconnection time [ms] Mass Motor mass without brake and without fan [kg] Moment of inertia [kgcm2] Rated output [W] Rated voltage 24 +6/-10% 24 +6/-10% 24 +6/-10% 24 +6/-10% [VDC] Table 6-19: Technical data of the holding brake of the SH-140 Technical data of the holding brake of the SH-205 Parameters SH SH SH Unit Static holding torque at 120 C [Nm] Coupling time [ms] Disconnection time [ms] Mass Motor mass without brake and without fan [kg] Moment of inertia [kgcm2] Rated output [W] Rated voltage 24 +6/-10% 24 +6/-10% 24 +6/-10% [VDC] Table 6-20: Technical data of the holding brake of the SH-205 ELAU GmbH PacDrive SH-Motor Page 49

50 6 Technical data Fan cover Parameters Unit SH100 SH140 SH205 Rated voltage [V DC] Power consumption [Watt] Table 6-21: Technical data of the fan 24V DC Encoder SinCos (SKS36) single turn Resolution Parameters Value Unit Dependent on the controller Number of sine/cosine periods 128 Per revolution Absolute measuring range 1 Revolutions Error limits of the digital absolute value +/-5.3 Angular minutes Error limits when evaluating the 128 signals (integral non-linearity) Signal form +/-1.3 Angular minutes Sine Supply voltage Volts Recommended supply voltage 8 Volts Supply current Max. 60 (without load) Milliamperes Table 6-22: Technical data of the SinCos encoder (SKS-36) SinCos (SKM36) multiturn Resolution Parameters Value Unit Dependent on the controller Number of sine/cosine periods 128 Per revolution Absolute measuring range 4096 Revolutions Error limits of the digital absolute value +/-5.3 Angular minutes Error limits when evaluating the 128 signals (integral non-linearity) Signal form +/-1.3 Angular minutes Sine Supply voltage Volts Recommended supply voltage 8 Volts Supply current Max. 60 (without load) Milliamperes Table 6-23: Technical data of the SinCos encoder (SKM-36) Page 50 PacDrive SH-Motor ELAU GmbH

51 M [Nm] 6.3 Torque/speed characteristic curves 6.3 Torque/speed characteristic curves The torque-speed characteristic curve represents the following characteristics: The permissible permanent torque (operating type S 1) The peak torque when the mains voltage = 230 V 3 AC The peak torque when the mains voltage = 400 V 3 AC 3,6 3,0 M max 230V 3AC M max 400V 3AC 2,4 1,8 M d 1,2 0,6 0, n [min -1 ] Figure 6-6: Example of a torque-speed characteristic curve The characteristic curves refer to an ambient temperature of 40 C and a maximum winding temperature of 120 C. With a one-phase mains connection (230 V), the characteristic curve shifts by approx. 20% further to the left due to lower DC bus voltage. ELAU GmbH PacDrive SH-Motor Page 51

52 M [Nm] M [Nm] 6 Technical data Self-cooling 1,6 1,4 1,2 M max 230V 3AC M max 400V 3AC 1,0 0,8 0,6 M d 0,4 0,2 0, n [min -1 ] Figure 6-7: Torque-speed characteristics SH (self-cooling) 2,8 2,4 M max 230V 3AC M max 400V 3AC 2,0 1,6 1,2 0,8 M d 0,4 0, n [min -1 ] Figure 6-8: Torque-speed characteristics SH (self-cooling) Page 52 PacDrive SH-Motor ELAU GmbH

53 M [Nm] M [Nm] 6.3 Torque/speed characteristic curves 3,6 3,0 M max 230V 3AC M max 400V 3AC 2,4 1,8 1,2 M d 0,6 0, n [min -1 ] Figure 6-9: Torque-speed characteristics SH (self-cooling) 3,6 3,0 M max 230V 3AC M max 400V 3AC 2,4 1,8 M d 1,2 0,6 0, n [min -1 ] Figure 6-10: Torque-speed characteristics SH (self-cooling) ELAU GmbH PacDrive SH-Motor Page 53

54 M [Nm] M [Nm] 6 Technical data 8,0 7,0 6,0 M max 230V 3AC M max 400V 3AC 5,0 4,0 3,0 M d 2,0 1,0 0, n [min -1 ] Figure 6-11: Torque-speed characteristics SH (self-cooling) 12,0 10,0 M max 230V 3AC M max 400V 3AC 8,0 6,0 4,0 M d 2,0 0, n [min -1 ] Figure 6-12: Torque-speed characteristics SH (self-cooling) Page 54 PacDrive SH-Motor ELAU GmbH

55 M [Nm] M [Nm] 6.3 Torque/speed characteristic curves 10,0 M max 230V 3AC M max 400V 3AC 8,0 6,0 4,0 M d 2,0 0, n [min -1 ] Figure 6-13: Torque-speed characteristics SH (self-cooling) 20,0 18,0 16,0 14,0 12,0 10,0 8,0 M max 230V 3AC M max 400V 3AC 6,0 M d 4,0 2,0 0, n [min -1 ] Figure 6-14: Torque-speed characteristics SH (self-cooling) ELAU GmbH PacDrive SH-Motor Page 55

56 M [Nm] M [Nm] 6 Technical data 30,0 25,0 M max 230V 3AC M max 400V 3AC 20,0 15,0 10,0 M d 5,0 0, n [min -1 ] Figure 6-15: Torque-speed characteristics SH (self-cooling) 45,0 40,0 35,0 M max 230V 3AC M max 400V 3AC 30,0 25,0 20,0 15,0 10,0 M d 5,0 0, n [min -1 ] Figure 6-16: Torque-speed characteristics SH (self-cooling) Page 56 PacDrive SH-Motor ELAU GmbH

57 M [Nm] M [Nm] 6.3 Torque/speed characteristic curves 30,0 25,0 M max 230V 3AC M max 400V 3AC 20,0 15,0 M d 10,0 5,0 0, n [min -1 ] Figure 6-17: Torque-speed characteristics SH (self-cooling) 70,0 60,0 50,0 M max 230V 3AC M max 400V 3AC 40,0 30,0 20,0 M d 10,0 0, n [min -1 ] Figure 6-18: Torque-speed characteristics SH (self-cooling) ELAU GmbH PacDrive SH-Motor Page 57

58 M [Nm] M [Nm] 6 Technical data 100,0 90,0 80,0 70,0 M max 230V 3AC M max 400V 3AC 60,0 50,0 40,0 30,0 M d 20,0 10,0 0, n [min -1 ] Figure 6-19: Torque-speed characteristics SH (self-cooling) 140,0 120,0 M max 230V 3AC M max 400V 3AC 100,0 80,0 60,0 40,0 M d 20,0 0, n [min -1 ] Figure 6-20: Torque-speed characteristics SH (self-cooling) Page 58 PacDrive SH-Motor ELAU GmbH

59 M [Nm] M [Nm] 6.3 Torque/speed characteristic curves 120,0 100,0 M max 230V 3AC M max 400V 3AC 80,0 60,0 40,0 M d 20,0 0, n [min -1 ] Figure 6-21: Torque-speed characteristics SH (self-cooling) 240,0 200,0 M max 230V 3AC M max 400V 3AC 160,0 120,0 80,0 M d 40,0 0, n [min -1 ] Figure 6-22: Torque-speed characteristics SH (self-cooling) ELAU GmbH PacDrive SH-Motor Page 59

60 M [Nm] 6 Technical data 350,0 300,0 M max 230V 3AC M max 400V 3AC 250,0 200,0 150,0 100,0 M d 50,0 0, n [min -1 ] Figure 6-23: Torque-speed characteristics SH (self-cooling) Page 60 PacDrive SH-Motor ELAU GmbH

61 M [Nm] M [Nm] 6.3 Torque/speed characteristic curves Force-ventilated 10,0 M max 230V 3AC M max 400V 3AC 8,0 6,0 M d 4,0 2,0 0, n [min -1 ] Figure 6-24: Torque-speed characteristics SH (force-ventilated) 20,0 18,0 16,0 14,0 12,0 10,0 M max 230V 3AC M max 400V 3AC 8,0 M d 6,0 4,0 2,0 0, n [min -1 ] Figure 6-25: Torque-speed characteristics SH (force-ventilated) ELAU GmbH PacDrive SH-Motor Page 61

62 M [Nm] M [Nm] 6 Technical data 30,0 25,0 M max 230V 3AC M max 400V 3AC 20,0 15,0 10,0 M d 5,0 0, n [min -1 ] Figure 6-26: Torque-speed characteristics SH (force-ventilated) 45,0 40,0 35,0 M max 230V 3AC M max 400V 3AC 30,0 25,0 20,0 15,0 M d 10,0 5,0 0, n [min -1 ] Figure 6-27: Torque-speed characteristics SH (force-ventilated) Page 62 PacDrive SH-Motor ELAU GmbH

63 M [Nm] M [Nm] 6.3 Torque/speed characteristic curves 30,0 25,0 M max 230V 3AC M max 400V 3AC 20,0 15,0 M d 10,0 5,0 0, n [min -1 ] Figure 6-28: Torque-speed characteristics SH (force-ventilated) 70,0 60,0 50,0 M max 230V 3AC M max 400V 3AC 40,0 30,0 M d 20,0 10,0 0, n [min -1 ] Figure 6-29: Torque-speed characteristics SH (force-ventilated) ELAU GmbH PacDrive SH-Motor Page 63

64 M [Nm] M [Nm] 6 Technical data 100,0 90,0 80,0 70,0 M max 230V 3AC M max 400V 3AC 60,0 50,0 40,0 M d 30,0 20,0 10,0 0, n [min -1 ] Figure 6-30: Torque-speed characteristics SH (force-ventilated) 140,0 120,0 M max 230V 3AC M max 400V 3AC 100,0 80,0 60,0 M d 40,0 20,0 0, n [min -1 ] Figure 6-31: Torque-speed characteristics SH (force-ventilated) Page 64 PacDrive SH-Motor ELAU GmbH

65 M [Nm] M [Nm] 6.3 Torque/speed characteristic curves 120,0 100,0 M max 230V 3AC M max 400V 3AC 80,0 60,0 M d 40,0 20,0 0, n [min -1 ] Figure 6-32: Torque-speed characteristics SH (force-ventilated) 240,0 200,0 M max 230V 3AC M max 400V 3AC 160,0 120,0 M d 80,0 40,0 0, n [min -1 ] Figure 6-33: Torque-speed characteristics SH (force-ventilated) ELAU GmbH PacDrive SH-Motor Page 65

66 M [Nm] 6 Technical data 350,0 300,0 M max 230V 3AC M max 400V 3AC 250,0 200,0 150,0 M d 100,0 50,0 0, n [min -1 ] Figure 6-34: Torque-speed characteristics SH (force-ventilated) Page 66 PacDrive SH-Motor ELAU GmbH

67 6.4 Electrical connections 6.4 Electrical connections Figure 6-35: SH-Motor connection overview 1 Brake/temperature/motor connection 2 Additional ground connection 3 Encoder Connection Figure 6-36: SH-100, SH-140 and SH-205 with fan cover 1 Brake/temperature/motor connection - SH-100/SH Encoder connection - SH-100/SH Brake/temperature/motor connection - SH Encoder connection - SH-205 ELAU GmbH PacDrive SH-Motor Page 67

Trademarks PacDrive is a registered trademark of ELAU AG. All other trademarks mentioned are the exclusive property of their manufacturers.

Trademarks PacDrive is a registered trademark of ELAU AG. All other trademarks mentioned are the exclusive property of their manufacturers. Imprint All rights reserved to ELAU AG, also in case of patent right applications. No part of this documentation and the related software and firmware may be reproduced, rewritten, stored on a retrieval

More information

BMH. Servo motor Motor manual V2.1, , V2.1,

BMH. Servo motor Motor manual V2.1, , V2.1, BMH Servo motor Motor manual V2.1, 03.2016 www.schneider-electric.com The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of

More information

TGN, TGH AND TGT SERVOMOTORS

TGN, TGH AND TGT SERVOMOTORS TGN, TGH AND TGT SERVOMOTORS Instruction manual. Information furnished by is believed to be accurate and reliable. However, no responsibility is assumed by TG Drives for its use. TG Drives reserves the

More information

Commissioning Manual AC Servo Actuator LynxDrive SIEMENS SIMODRIVE

Commissioning Manual AC Servo Actuator LynxDrive SIEMENS SIMODRIVE Commissioning Manual AC Servo Actuator LynxDrive SIEMENS SIMODRIVE 06/2017 1017913 Content 1. General... 3 1.1 Description of Safety Alert s... 4 1.2 Disclaimer and Copyright... 4 2. Safety and Installation

More information

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL MOTORTECH Tools & Test Equipment for Ignition Systems P/N 01.10.019 Rev. 01/2013 Copyright Copyright 2012 MOTORTECH GmbH. All rights reserved. Distribution

More information

Appendix: Safety and application notes for... 15

Appendix: Safety and application notes for... 15 Contents Safety... 2 Warnings... 2 Symbols used in this manual... 2 Operator s safety... 2 Avoid filter module damage... 2 DC-link resonance... 2 Description... 3 Description... 3 Ordering numbers, 380-415

More information

Technical Documentation

Technical Documentation Technical Documentation Product manual Holding brake controller Document: 0198441113316 Edition: V1.00, 03.2006 Important information The drive systems described here are products for general use that

More information

Swing Piston Compressors and Vacuum Pumps

Swing Piston Compressors and Vacuum Pumps Swing Piston Compressors and Vacuum Pumps NPK 018 AC Pressure NPK 018 DC Pressure NPK 018 AC Vacuum NPK 018 DC Vacuum Operating and Installation Instructions Read and observe these Operating and Installation

More information

Operating Manual (Edition 04/2004) sinamics. Braking Module / Braking Resistor SINAMICS G130

Operating Manual (Edition 04/2004) sinamics. Braking Module / Braking Resistor SINAMICS G130 Operating Manual (Edition 04/2004) sinamics Braking Module / Braking Resistor SINAMICS G130 04/04 Contents Contents 1 Safety Information 1-1 2 General 2-1 3 Mechanical Installation 3-1 4 Connection 4-1

More information

Installation and Operational Instructions for ROBATIC -clutch Types _.0 and _.0 Sizes 3 7

Installation and Operational Instructions for ROBATIC -clutch Types _.0 and _.0 Sizes 3 7 Please read these Installation and Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunction or to clutch failure, resulting in damage to other

More information

Introduction. 1/2 Overview 1/3 Benefits 1/3 Application. 1/3 Order No. code. 1/4 Protection strategy

Introduction. 1/2 Overview 1/3 Benefits 1/3 Application. 1/3 Order No. code. 1/4 Protection strategy /2 Overview /3 Benefits /3 Application /3 Order No. code /4 Protection strategy /5 General technical data /5 Converter-fed operation /7 Motor protection /7 Bearing monitoring /8 Electrical design /8 Motor

More information

Installation and Operational Instructions for ROBATIC -clutch Type and Type Sizes 3 9

Installation and Operational Instructions for ROBATIC -clutch Type and Type Sizes 3 9 Please read the Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:

More information

Turbocharger / VTR..0, VTR..1 Original assembly instructions English

Turbocharger / VTR..0, VTR..1 Original assembly instructions English Assembly Instructions Turbocharger / VTR..0, VTR..1 Original assembly instructions English This document is valid for the VTR..0/..1 series: VTR160, VTR200, VTR250, VTR320, VTR400 VTR161, VTR201, VTR251,

More information

SERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016

SERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016 SERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016 3009/16 en Ed.02.2016 Read these Operating Instructions before performing any transportation, installation, commissioning, maintenance or

More information

BMH Servo motor Motor manual V1.03,

BMH Servo motor Motor manual V1.03, Servo motor Motor manual V1.03, 11.2011 www.schneider-electric.com Important information BMH Important information This manual is part of the product. Carefully read this manual and observe all instructions.

More information

TPM + Bosch Rexroth IndraDrive. Quick Startup Guide D Revision: 02

TPM + Bosch Rexroth IndraDrive. Quick Startup Guide D Revision: 02 4091-D012345 00 TPM + Bosch Rexroth IndraDrive Quick Startup Guide 4091-D032116 Revision: 02 Quick Startup Guide TPM + Revision history Revision Date Comment Chapter 01 27 th July 2012 First release All

More information

Assembly and Maintenance Manual Type ASNU

Assembly and Maintenance Manual Type ASNU Assembly and Maintenance Manual Type ASNU Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_ASNU.docx

More information

Datasheet PDCSY-MW-CHM. Technical Overview. Features. Product warranty and total quality commitment. General Information.

Datasheet PDCSY-MW-CHM. Technical Overview. Features. Product warranty and total quality commitment. General Information. Datasheet Compact Heat Meters Technical Overview Heat energy is calculated by using a matched pair of high accuracy sensors to measure the difference between the forward and flow temperatures. The amount

More information

Product Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications

Product Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications Product Information ECN 425 EQN 437 Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications 4/2014 ECN 425, EQN 437 Rotary encoders for absolute position

More information

Instruction Manual. Harmonic Filter AHF 005/010. Drives Solutions

Instruction Manual. Harmonic Filter AHF 005/010. Drives Solutions Harmonic Filter AHF 005/010 Instruction Manual Drives Solutions Contents Safety... 2 Warnings... 2 Symbols used in this manual... 2 Operator s safety... 2 Avoid filter module damage... 2 DC-link resonance...

More information

Assembly and Maintenance Manual Type RSBW

Assembly and Maintenance Manual Type RSBW Assembly and Maintenance Manual Type RSBW Hatschekstr. 36 69126 Heidelberg Germany Tel +49(0)6221 30470 Tel +49(0)6221 304731 info@stieber.de www.stieber.de Stieber Clutch Date of issue: 16/03/2017 GB

More information

Compact Heat Meters. Features. -A Pulsed output. -B M-Bus output. Accessories. UK Sales Tel: International Tel:

Compact Heat Meters. Features. -A Pulsed output. -B M-Bus output. Accessories. UK Sales Tel: International Tel: Compact Heat Meters Features Compact design Simple operation Pulsed output Measures heating or cooling Specification Product Codes Water Meter Temp. range 10 to 90 C Nominal pressure 16bar Installation

More information

VEM motors Thurm GmbH

VEM motors Thurm GmbH VEM motors Thurm GmbH Installation, Operating and Maintenance Instructions Single-Phase Squirrel-Cage Induction Motors, Standard Version March 2005 1. General To avoid damage to the motors and equipment

More information

Assembly and Maintenance Manual Type AS

Assembly and Maintenance Manual Type AS Assembly and Maintenance Manual Type AS Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_AS.docx

More information

SMH High Torque Density

SMH High Torque Density SMH High Torque Density AC Synchronous Servo Motor Catalogue Version:C Date: January, 207 Kinavo Servo Motor(Changzhou)Ltd. Tel.: +8-0-88037 Fax: +8-0-88072 Website: http://www.kinavo.com Add.: Building

More information

Tension Meter. Edition FT 03.E. FT Series. Instruction Manual. Valid as of: Please keep the manual for future reference!

Tension Meter. Edition FT 03.E. FT Series. Instruction Manual. Valid as of: Please keep the manual for future reference! Tension Meter FT Series S C H M I D T c o n t r o l i n s t r u m e n t s Edition FT 03.E Model FT Instruction Manual Valid as of: 01.09.2011 Please keep the manual for future reference! Contents 1 Warranty

More information

Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600

Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600 Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600 Installation Guide WBP-Box-IEN103320 IMEN-WBP-BOX Version 2.0 EN SMA Solar Technology AG Table of Contents Table of Contents

More information

Drive Unit e-drive1. Installation instructions 04/2014. English translation of the original German installation instructions

Drive Unit e-drive1. Installation instructions 04/2014. English translation of the original German installation instructions Drive Unit e-drive1 Installation instructions 04/2014 English translation of the original German installation instructions Contents Foreword... 3 Availability... 3 Structural features in the text... 3

More information

INTRODUCTION WARNING SIGNS AND THEIR MEANINGS

INTRODUCTION WARNING SIGNS AND THEIR MEANINGS INTRODUCTION FMI-series frameless motors by Rozum Robotics are designed to provide motion as part of a motion system. Available in a range of sizes (stator dia. 41, 51, 75 mm), FMI motors are suitable

More information

Operating manual. Custom made gearboxes

Operating manual. Custom made gearboxes Operating manual Custom made gearboxes DSS-Nr. 100389549 DSS-Rev. 001 Datum 16.01.2018 Contents Contents 1 General information 3 1.1 Using the operating manual 3 1.2 Warnings in this operating manual 4

More information

TPM + Control Techniques UNIDRIVE SP. Quick Startup Guide D Revision: 02

TPM + Control Techniques UNIDRIVE SP. Quick Startup Guide D Revision: 02 4091-D012345 00 TPM + Control Techniques UNIDRIVE SP Quick Startup Guide 4091-D032118 Revision: 02 Quick Startup Guide TPM + Revision history Revision Date Comment Chapter 01 27 th July 2012 First release

More information

Appendix: Safety and application notes for 19

Appendix: Safety and application notes for 19 Contents Safety 2 Warnings 2 Symbols used in this manual 2 Operator's safety 2 Avoid filter module damage 2 DC-link resonance 2 Description 3 Description 3 Ordering numbers, 380-415 V, 50 Hz 4 Ordering

More information

Rexroth IndraDyn E. Standard Motors MOT-FC for Frequency Converter Operation. Project planning manual R Edition 03

Rexroth IndraDyn E. Standard Motors MOT-FC for Frequency Converter Operation. Project planning manual R Edition 03 Rexroth IndraDyn E Standard Motors MOT-FC for Frequency Converter Operation Project planning manual R911343624 Edition 03 Bosch Rexroth AG DOK-MOTOR*-MOT-FC*****-PR03-EN-P Title Type of Documentation Document

More information

SCOPELITE TIMING LIGHT OPERATING MANUAL

SCOPELITE TIMING LIGHT OPERATING MANUAL SCOPELITE TIMING LIGHT OPERATING MANUAL MOTORTECH Tools & Test Equipment for Ignition Systems P/N 01.10.020-EN Rev. 11/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and

More information

SERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016

SERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016 SERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016 3010/16 en Ed.10.2016 Read these Operating Instructions before performing any transportation, installation, commissioning,

More information

Electromagnetic clutch-brake combinations INTORQ

Electromagnetic clutch-brake combinations INTORQ Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated

More information

Operating instructions

Operating instructions Operating instructions Digital tank contents indicator DTA 10 DTA 10 DTA 10 0 4.0 m fuel oil 0 3.5 m water Read instructions before using device! Observe all safety information! Keep instructions for future

More information

Datasheet. Pitch Motor PMSM SP190C8

Datasheet. Pitch Motor PMSM SP190C8 Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor

More information

ICH Linear Motors REACH. Installation Guide

ICH Linear Motors REACH. Installation Guide ICH Installation Guide ICH Linear Motors English Installation Guide Edition: A, October 2015 Part Number ICH-Installation-Guide-EN Original language English European Version (CE region) REACH Keep all

More information

Robots. KUKA Roboter GmbH KR 500 FORTEC. With F and C Variants Specification. Issued: Version: Spez KR 500 FORTEC V3

Robots. KUKA Roboter GmbH KR 500 FORTEC. With F and C Variants Specification. Issued: Version: Spez KR 500 FORTEC V3 Robots KUKA Roboter GmbH KR 500 FORTEC With F and C Variants Specification Issued: 28.10.2014 Version: Spez KR 500 FORTEC V3 Copyright 2014 KUKA Roboter GmbH Zugspitzstraße 140 D-86165 Augsburg Germany

More information

Datasheet. Pitch Motor PMSM SP190F8

Datasheet. Pitch Motor PMSM SP190F8 Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor

More information

Below, you can see the warning symbols used throughout the manual and their meaning.

Below, you can see the warning symbols used throughout the manual and their meaning. FMI60201 Frameless motors INTRODUCTION FMI-series frameless motors by Rozum Robotics are designed to provide motion as part of a motion system. Available in a range of sizes (dia. 40, 50, 60, 75 mm), FMI

More information

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions 1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:

More information

Ex m Solenoid Operator Type 0519

Ex m Solenoid Operator Type 0519 nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for

More information

Documentation. Stepper motor AS1000. Version: Date:

Documentation. Stepper motor AS1000. Version: Date: Documentation Version: Date: 3.6 2017-07-26 Documented motors 1 Documented motors AS10xx-xxxx Standstill torque [Nm] Rated current [A] AS1010-0000 0,38 1,0 0,056 Rotor moment of inertia [kg cm²] Resolution

More information

Configuring Manual Edition 04/2007

Configuring Manual Edition 04/2007 SINAMICS S120 Drive Technology Configuring Manual Edition 04/2007 1FT7 synchronous motors SINAMICS S120 sinamics s Preface Motor description 1 SINAMICS S120 Configuration Manual Use 2 Mechanical data

More information

SIMOTICS S-1FT7 Servomotors. The Compact Servomotors for High-Performance Motion Control Applications. Motors. Edition April 2017.

SIMOTICS S-1FT7 Servomotors. The Compact Servomotors for High-Performance Motion Control Applications. Motors. Edition April 2017. Motors SIMOTICS S-1FT7 Servomotors The Compact Servomotors for High-Performance Motion Control Applications Brochure Edition April 2017 siemens.com/servomotors The Servomotors for High-Performance Applications

More information

Datasheet. Pitch Motor PMSM SP260B8

Datasheet. Pitch Motor PMSM SP260B8 Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor

More information

AMxxxx Synchronous Servomotors

AMxxxx Synchronous Servomotors AMxxxx Synchronous Servomotors One Cable Technology (OCT) for power and feedback with absolute encoder Backlash-free permanent magnet holding brake Rotatable speedtec plug Modular design Greatest possible

More information

Matrix APAX. 380V-415V 50Hz TECHNICAL REFERENCE MANUAL

Matrix APAX. 380V-415V 50Hz TECHNICAL REFERENCE MANUAL Matrix APAX 380V-415V 50Hz TECHNICAL REFERENCE MANUAL WARNING High Voltage! Only a qualified electrician can carry out the electrical installation of this filter. Quick Reference ❶ Performance Data Pages

More information

REFERENCE MANUAL FORM: MX-TRM-E REL REV MTE

REFERENCE MANUAL FORM: MX-TRM-E REL REV MTE Matrix APAX 380V-415V 50Hz TECHNICAL REFERENCE MANUAL FORM: MX-TRM-E REL. September 2014 REV. 002 2014 MTE Corporation WARNING High Voltage! Only a qualified electrician can carry out the electrical installation

More information

Heat Meter Integrator

Heat Meter Integrator Heat Meter Integrator Features Simply operation Integral wall and DIN-rail mounting bracket Pulsed or M-Bus output options Measures heating or cooling and heat/cooling Specification Product Codes Temperature

More information

Permanent-magnet synchronous motors

Permanent-magnet synchronous motors Permanent-magnet synchronous motors Contents Product description 12/2 Overview of technical data 12/4 Motor selection data Series PE.. for Super Premium Efficiency IE4 1) 12/5 Series P, high-power motors

More information

Installation and Operating Instructions for ROBA-stop -Positioning Brake Type 80_.41_._ Sizes 3 11

Installation and Operating Instructions for ROBA-stop -Positioning Brake Type 80_.41_._ Sizes 3 11 Please read and observe this Operating Instruction carefully! A possible malfunction or failure of the brake and any damage may be caused by not observing it. Table of contents: Page 1: Page 2: Page 3:

More information

Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM

Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM 150 150 150 This instruction manual contains proprietary information which is protected by copyright laws. No part of

More information

Datasheet PDCSY-MW-U. Technical Overview. Features. Product warranty and total quality commitment.

Datasheet PDCSY-MW-U. Technical Overview. Features. Product warranty and total quality commitment. Datasheet Ultrasonic Flow Sensors & Integrator Technical Overview Ultrasonic flow sensors have no moving parts in the volume flow, this makes them almost wear free and noiseless. They measure the flow

More information

Exchange of rollers from the XTS-Mover

Exchange of rollers from the XTS-Mover Service documentation for AT901-0050-0550 and AT9011-00x0-0550 Version: Date: 1.0 0.10.017 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1. Documentation issue

More information

Installation and Operating Instructions Electric Vibrators HV/VFL Series

Installation and Operating Instructions Electric Vibrators HV/VFL Series Installation and Operating Instructions Electric Vibrators HV/VFL Series Original Instruction Würges Vibrationstechnik GmbH Daimlerstraße 9 D-86356 Neusäß Telephone +49 821 463081 Telefax +49 821 463084

More information

Operating Instructions

Operating Instructions Operating Instructions Ex UPS Combination of > 8265/5 GUBox control panel > 8316 battery box Contents 1 Contents 1 Contents 2 2 General Information 2 3 Safety Instructions 2 4 Conformity to standards 3

More information

zelsius Installation and operating manual All that counts EnergyMetering

zelsius Installation and operating manual All that counts EnergyMetering EnergyMetering zelsius Installation and operating manual Electronic compact heat meter M-Bus and 2 inputs/outputs optional Coaxial measuring capsule 2" q p 0.6/1.5/2.5 m³/h All that counts General information

More information

Operating manual Separator

Operating manual Separator Operating manual Separator Sheet no. AS/4.1.141.1.1 issue 20.08.2014 Contents Section Title Page 0 Introduction... 1 1 Intended use......1 2 Marking of the fitting... 1 3 Safety instructions... 2 4 Transport

More information

Brushless servo motors as replacements for conventional disk armature motors

Brushless servo motors as replacements for conventional disk armature motors MC 17-Bl MC 23-Bl Brushless servo motors as replacements for conventional disk armature motors 1 MOTOR TECHNOLOGY LTD MOTEC HOUSE, CHADKIRK BUSINESS PARK, STOCKPORT, CHESHIRE SK6 3NE ENGLAND TEL: +44 (0)161

More information

original operating manual Operating manual Translation of the Item-No.: ,

original operating manual Operating manual Translation of the Item-No.: , Translation of the original operating manual Operating manual Item-No.: 015 431 551, 015 431 581 Important! Copyright The operating manual is always to be read before commissioning the equipment. No warranty

More information

Induction motor SIMOTICS M-1PH8

Induction motor SIMOTICS M-1PH8 Induction motor Type 1PH818., 1PH822. forced ventilated II 3D Ex tc IIIB T150 C Dc Operating Instructions / Installation Instructions 11/2012 30.11.2012 17:35 V11.02 Introduction 1 Safety information 2

More information

Synchronous Servomotors

Synchronous Servomotors Technical manual, mounting and first installation Synchronous Servomotors Series MH* - MT - MTK * Please see page 3: Legend of the present manual: Version I/14 Merkes GmbH Version I/16 1 Synchron-Servomotoren

More information

SINGLE PHASE TEFC CAGE MOTORS

SINGLE PHASE TEFC CAGE MOTORS SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current

More information

Tina 4A Connection block

Tina 4A Connection block Original instructions Tina 4A Connection block Instructions valid for versions of the product from ver. H ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read

More information

Operating and Installation Instructions Swing Piston Compressors and Vacuum Pumps

Operating and Installation Instructions Swing Piston Compressors and Vacuum Pumps Operating and Installation Instructions Swing Piston Compressors and Vacuum Pumps UNPK04DC Pressure UNPK04DCB Pressure UNPK04DC Vacuum UNPK04DCB Vacuum KNF Neuberger, Inc 2 Black Forest Rd Trenton, NJ

More information

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction / Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with

More information

Operating instructions Solenoid interlock EX-AZM About this document. Content

Operating instructions Solenoid interlock EX-AZM About this document. Content EX-AZM 161 1. About this document Operating instructions.............pages 1 to 6 Translation of the original operating instructions 1.1 Function This operating instructions manual provides all the information

More information

Toothed belt axis ELGC-TB-KF. Operating instruction [ ]

Toothed belt axis ELGC-TB-KF. Operating instruction [ ] Toothed belt axis ELGC-TB-KF en Operating instruction 8068220 2017-02 [8068222] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which can

More information

Levante Sistemas de Automatización y Control S.L.

Levante Sistemas de Automatización y Control S.L. Catálogos Levante Sistemas de Automatización y Control S.L. LSA Control S.L. Camí del Port 143 46470 Catarroja (Valencia) Telf. (+34) 960 62 43 01 comercial@lsa-control.com www.lsa-control.com www.boschrexroth.es

More information

Compact System NRGS 11-2 NRGS Original Installation Instructions English

Compact System NRGS 11-2 NRGS Original Installation Instructions English Compact System NRGS 11-2 NRGS 16-2 EN English Original Installation Instructions 810366-05 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 LV (Low Voltage) Directive

More information

PV Inverter SUNNY MINI CENTRAL 9000TL / 10000TL / 11000TL with Reactive Power Control

PV Inverter SUNNY MINI CENTRAL 9000TL / 10000TL / 11000TL with Reactive Power Control PV Inverter SUNNY MINI CENTRAL 9000TL / 10000TL / 11000TL with Reactive Power Control User Manual SMC9-11TLRP-BA-en-30 TBEN-SMCTLRP Version 3.0 EN SMA Solar Technology AG Table of Contents Table of Contents

More information

2-PHASE STEPPING MOTOR DRIVER FE Z5 DISPENSE

2-PHASE STEPPING MOTOR DRIVER FE Z5 DISPENSE 2-PHASE STEPPING MOTOR DRIVER FE Z5 DISPENSE For Diaphragm Dosing Pumps FEM 1.02_.55 / FEM 1.09_.55 Controller board package, without pump: ID 160536 Operating and Installation Manual It is important to

More information

! CAUTION! Damages on the machine possible.

! CAUTION! Damages on the machine possible. 1 DATAFLEX is a maintenance free torque measurement shaft with integrated speed measurement. In connection with the RADEX -N steel disc coupling it is a torsionally stiff double cardanic coupling with

More information

LSP Servomotors. Order Catalogue. Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm

LSP Servomotors. Order Catalogue. Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm LSP Servomotors Order Catalogue Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm ID no.: 0814.8B.0-01 Date: 10/01 Subject to technical change without notice. The German version is the original of

More information

Turbocharger / A100-L Original assembly instructions English

Turbocharger / A100-L Original assembly instructions English Assembly Instructions Turbocharger / A100-L Original assembly instructions English This document is valid for the A100-L series: A165-L, A170-L, A175-L, A180-L, A185-L, A190-L Purpose The assembly instructions

More information

Turbocharger / TPL-B Original assembly instructions English

Turbocharger / TPL-B Original assembly instructions English Assembly Instructions Turbocharger / TPL-B Original assembly instructions English This document is valid for the TPL-B series: TPL85-B14/15/16, TPL91-B Purpose The assembly instructions explain how the

More information

DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient.

DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. B E N E F I T S Maximum dynamic response Increased energy efficiency High cost effectiveness Long service life Single-cable solution 2 DYNASYN

More information

Operating instructions Solenoid interlock TKM/TKF. 1. About this document. Content

Operating instructions Solenoid interlock TKM/TKF. 1. About this document. Content 1. About this document Operating instructions.............pages 1 to 6 Original 1.1 Function This operating instructions manual provides all the information you need for the mounting, set-up and commissioning

More information

User Manual Rittal PMC UPS 6kVA

User Manual Rittal PMC UPS 6kVA User Manual Rittal PMC UPS 6kVA Germany Rittal GmbH & Co. KG Auf dem Stützelberg D-35745 Herborn Tel.: ++49-27 72-5 05-0 Fax: ++49-27 72-5 05-23 19 Internet: www.rittal.de 26 Contents 1. Introduction...

More information

ZE motor-protective relay Overload monitoring of EEx e motors

ZE motor-protective relay Overload monitoring of EEx e motors Building Automation Industrial Automation Systems Hardware and Engineering ZE motor-protective relay Overload monitoring of EEx e motors 0/0 AWB300-5GB A Think future. Switch to green. All brand and product

More information

Technical Manual Electrical Power Supply System T4002

Technical Manual Electrical Power Supply System T4002 Technical Manual Electrical Power Supply System T400 MOZELT GmbH & Co. KG Please observe the following safety information and recommendations before start-up! Copyright: MOZELT GmbH & Co. KG, D-4769 Duisburg

More information

Operation Manual. Stepper motor AS2000. Version: Date:

Operation Manual. Stepper motor AS2000. Version: Date: Operation Manual Version: Date: 1.1 2019-01-25 Table of content Table of content 1 Foreword... 5 1.1 Notes on the documentation... 5 1.2 Documentation Issue Status... 6 1.3 Appropriate use... 6 2 Guidelines

More information

DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful.

DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful. DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful. Top-class dynamic response: DT compact high-torque motors The DYNASYN DT series of high-torque motors meets the highest requirements made by

More information

DRIVESPIN ROTARY ACTUATORS

DRIVESPIN ROTARY ACTUATORS DRIVESPIN ROTARY ACTUATORS Installation and service manual. 2/2017 Information furnished by TG Drives is believed to be accurate and reliable. However, no responsibility is assumed by TG Drives for its

More information

D58 Series Brake Instructions

D58 Series Brake Instructions D58 Series Brake Instructions 4740 W. Electric Avenue Milwaukee, WI 53219 414/672-7830 FAX 414/672-5354 www. dingsbrakes.com Safety information 2 Safety information 2.1 Persons responsible for the safety

More information

Welcome to the ABB Industrial Drives, ACS800 planning the installation training module. If you need help navigating this module, click the Help

Welcome to the ABB Industrial Drives, ACS800 planning the installation training module. If you need help navigating this module, click the Help Welcome to the ABB Industrial Drives, ACS800 planning the installation training module. If you need help navigating this module, click the Help button in the top right corner. To view the presenter notes

More information

Rotary feed-through DDF-S/-KS

Rotary feed-through DDF-S/-KS Translation of the Original Operating Manual Rotary feed-through DDF-S/-KS Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property

More information

Operating Instructions for Roll-Up Door Operators / MDF

Operating Instructions for Roll-Up Door Operators / MDF Operating Instructions for Roll-Up Door Operators / MDF GB Roll-Up Door Operator / MDF / Rev. 0.0 1 1. Contents 3. General safety instructions 1. Contents 2 2. Key to symbols 2 3. General safety instructions

More information

Lexium integrated drives

Lexium integrated drives Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.

More information

Declaration of Conformity

Declaration of Conformity Declaration of Conformity We, Manufacturer: Spartanics Ltd. 3605 Edison Place Rolling Meadows, Illinois 60008 Phone: 847-394-5700 Fax: 847-394-0409 USA ENGLISH declare under our sole responsibility that

More information

MP-Series Integrated Gear Motors

MP-Series Integrated Gear Motors Installation Instructions MP-Series Integrated Gear Motors (Catalog Numbers: MPG-A004-031, MPG-A004-091, MPG-A010-031, MPG-A010-091, MPG-B010-031, MPG-B010-091, MPG-A025-031, MPG-A025-091, MPG-B025-031,

More information

KeContact P20. User manual

KeContact P20. User manual KeContact P20 User manual Comments to this manual In this manual you will find warnings against possible dangerous situations. The used symbols apply to the following meanings:!! WARNING! Indicates a potentially

More information

Installation and Operating Instructions for EAS -NC clutch Type 45_. _. _ Sizes 02 and 03

Installation and Operating Instructions for EAS -NC clutch Type 45_. _. _ Sizes 02 and 03 Table of contents: Please read and observe this Operating Instruction carefully! A possible malfunction or failure of the clutch and any damage may be caused by not observing it. Page 1: - Table of contents

More information

Original Operating Manual

Original Operating Manual 2010-10-29 Original Operating Manual Control Panel Comfort for Pedelecs Series 4313 Save for future use! Marquardt GmbH Schlossstraße 16 78604 Rietheim-Weilheim E-mail: marquardt@marquardt.de Website:

More information

Operating manual UPS - System

Operating manual UPS - System Operating manual UPS - System POWERMASTER M MIL 1000VA 7Min. BAX 3330 E UPS-Division Issued 15. August 2006 JOVYATLAS JOVYATLAS Elektrische Umformtechnik GmbH Groninger Straße 29-37 D-26789 Leer/Ostfriesland

More information

Operating Instructions

Operating Instructions Operating Instructions Terminal Box > 8150/1 > 8150/2 Contents 1 Contents 1 Contents...2 2 General Information...2 2.1 Manufacturer...2 2.2 Operating Instructions Information...2 3 Intended Use...2 4 Safety

More information