Edition. Spiroplan W10 DT56 Geared Motor 06/ x / EN

Size: px
Start display at page:

Download "Edition. Spiroplan W10 DT56 Geared Motor 06/ x / EN"

Transcription

1 Spiroplan W DT6 Geared Motor Edition 06/ x / EN

2 SEW-EURODRIVE

3 Contents 1 The New Design Available Types... 3 Torques of Spiroplan Geared Motors... 4 Advantages for You... 6 Technical Data Type designation and options W gear unit Hz motors Hz motors (NEMA/CSA) BMG02 brake Dimension Sheets Latest News Spiroplan W DT6 Geared Motor 3

4 1 The New Design 1 The New Design Fig. 1: Spiroplan W DT6M4 geared motor 04802AXX Fig. 2: Spiroplan WAF DT6L4 geared motor with size 80 output flange 0480AXX 4 Latest News Spiroplan W DT6 Geared Motor

5 Available Types 2 2 Available Types All versions at a glance Name Type Variant WDT6../ET6.. Spiroplan geared motor with solid shaft WFDT6../ET x 40 mm, foot-mounted version B flange with Ø 80 mm and Ø 120 mm WADT6../ET6.. Spiroplan geared motor with hollow shaft WAFDT6../ET6.. Ø 16 mm, shaft-mounted version B flange with Ø 80 mm and Ø 120 mm SEW-Eurodrive SEW-Eurodrive WDT6../ET6.. WFDT6../ET6.. SEW-Eurodrive SEW-Eurodrive WADT6.. /ET6.. WAFDT6../ET AXX 3 Torques of Spiroplan Geared Motors 70 Nm M a max [Nm] Nm 0 2 Nm W W20 W AXX Latest News Spiroplan W DT6 Geared Motor

6 4 Advantages for You 4 Advantages for You Lubrication for life Low weight kg Compact design Oil Wear-free gearing Simple installation Low-noise operation 0336AEN 6 Latest News Spiroplan W DT6 Geared Motor

7 Advantages for You 4 Spiroplan W gear units Wear-free and low-noise (approx. 0 db(a)) Aluminum die-cast housing, supplied unpainted as standard Maximum torque 2 Nm Speeds between 17 and 12 rpm Ratio range i = with a total of 12 stages Wide range of versions: with solid shaft 16 mm, A and/or B end output with solid shaft 16 mm and flange 80 mm or 120 mm with hollow shaft 16 mm with or without torque arm with hollow shaft 16 mm and flange 80 mm or 120 mm Universal application in all mounting positions as service life lubrication is independent of the mounting position Wide range of attachment options: Equal hole distances in side and bottom mounting surfaces Equal shaft heights for side and bottom mounting surfaces DT6 motor Motors with 90 W and 120 W rated power Terminal box ( Fig. 4, item 1) with cable run from directions "X" (= normal position) and "2" ( Fig. 3 ) 2 X Fig. 3: Position of the cable entry Simple to connect supply voltage to terminal block with spring-cage terminals ( Fig. 4, item 2) Fixed connection of the star point in the winding overhang AXX 3 2 TF TF U V W Fig. 4: Terminal box with terminal block and spring-cage terminals 04879AXX Latest News Spiroplan W DT6 Geared Motor 7

8 4 Advantages for You ET6 single-phase version The ET6 single-phase motor is available as an alternative to the three-phase version. The ET6 is supplied with a running capacitor mounted and connected. New BMG02 brake The new BMG02 ( Fig. ) brake can be mounted on the motor as an option. The design is based on the BMG principle with noise dampening measures. Automatic manual brake disengagement (2) is available as an option for the brake (SEW unit designation HR). The electrical power supply to the brake is possible either from a brake rectifier in the terminal box ( Fig. 4, item 3) or from the switch cabinet. Low weight The brake increases the total weight of the geared motor by only 0.8 kg. Long life, simple maintenance A sufficiently long service life is achieved by using a very resilient brake material, without the need to adjust the air gap. In the event of wear or a malfunction, the entire brake can be exchanged by unscrewing three bolts (3) and disconnecting the electrical feeder cables (1) Fig. : BMG02 brake 0344AXX 8 Latest News Spiroplan W DT6 Geared Motor

9 Technical Data Technical Data.1 Type designation and options Spiroplan right-angle gear units W Foot-mounted with solid shaft WF B flange-mounted with solid shaft WA Shaft-mounted with hollow shaft WAF B flange-mounted with hollow shaft Standard AC motors, DT6.. series Mount-on motor for gear unit Standard single-phase motors, ET6.. series Mount-on motor for gear unit Motor options /BMG /BMG/HR /TF (DT6 only) Brake (reduced noise) Brake with manual release, self-disengaging Thermistor sensor (PTC resistance) for thermal classification "B" or for thermal classification "F" Other versions without type designation Enclosure IP4, IP CSA / NEMA Thermal classification "F" For detailed technical data, please refer to the Geared Motors catalog, edition 0/2001. Latest News Spiroplan W DT6 Geared Motor 9

10 Technical Data.2 W gear unit Gear unit type M a max F 1) q max i Oil volume Motor types which can be [Nm] [N] [l] fitted W DT6 1) Foot-mounted gear unit Selection table The following figure shows the structure of the selection table for Spiroplan geared motors W.. DT6... P m n a M a i 1 ) F Ra [kw] [1/min] [Nm] [N] SEW-f B m [kg] Output speed Gear unit ratio Service factor Motor type Rated power driving motor Output torque Permissible overhung load output side Gear unit type Weight 04943AEN P m [kw] n a [rpm] M a [Nm] i F Ra 1) [N] SEW f B m [kg] * 60.00* 48.00* 39.00* 32.0* 27.0* 24.0* 19.0* 16.0* * 8.20* 7.00* 60.00* 48.00* 39.00* 32.0* 27.0* 24.0* 19.0* 16.0* * 8.20* W WF WA WAF W WF WA WAF DT DT DT DT DT DT DT DT 6M4 6M4 6M4 6M4 6L4 6L4 6L4 6L * Ultimate gear unit reduction ratio 1) Overhung load specified for foot-mounted gear unit with solid shaft Latest News Spiroplan W DT6 Geared Motor

11 Technical Data Assembly/disassembly kit for hollow shaft SEW recommends two possibilities of mounting gear units with hollow shaft and key onto the input shaft of the driven machine (= customer s shaft): 1. Assemble with the supplied fixing parts. 2. Assemble using the optional SEW assembly/disassembly kit. Always use the supplied NOCO Fluid paste during the assembly procedure. This avoids contact corrosion and facilitates subsequent disassembly. The key dimension X is defined by the customer, however X must be > DK. 1. Supplied fixing parts The following fixing parts are supplied as standard: Retaining screw with washer (2) Circlip (3) Customer shaft The installation length of the customer shaft with contact shoulder (A) must be L8-1 mm. The installation length of the customer shaft without contact shoulder (B) must equal L8. (A) (1) (2) (B) (1) (2) (4) (3) (4) (3) Fig. 6: Customer shaft with contact shoulder (A) and without contact shoulder (B) (1) Hollow shaft (3) Circlip (2) Retaining screw with washer (4) Customer shaft 03BXX Dimensions and tightening torque The retaining screw (2) must be tightened to the tightening torque MS given in the following table. Gear unit type D H7 DK L8 MS [Nm] WA Latest News Spiroplan W DT6 Geared Motor 11

12 Technical Data 2. SEW assembly/ disassembly kit You can also use the optional SEW assembly/disassembly kit for assembly. This can be ordered for the specific gear unit types by quoting the part numbers in the table below. The scope of delivery includes: Distance piece for assembly without contact shoulder () Retaining screw for assembly (2) Forcing disk for disassembly (7) Fixed nut for disassembly (8) The short retaining screw supplied as standard is not used. Customer shaft The installation length of the customer shaft must be LK2. The distance piece must not be used if the customer's shaft does have a contact shoulder (A). The installation length of the customer shaft must be LK2. The distance piece must be used if the customer shaft does not have a contact shoulder (B). (A) (B) (1) (2) (1) (2) (4) (3) (4) () (3) Fig. 7: Customer shaft with contact shoulder (A) and without contact shoulder (B) 0312BXX (1) Hollow shaft (4) Customer shaft (2) Retaining screw with washer () Distance piece (3) Circlip Dimensions, tightening torque and part numbers The retaining screw (2) must be tightened to the tightening torque MS given in the following table. Type D H7 DK LK2 LX +2 C7 MS [Nm] Assembly/ disassembly kit part number WA Latest News Spiroplan W DT6 Geared Motor

13 Technical Data Disassembly Only applies if the SEW assembly/disassembly kit was previously used for assembly. Proceed as follows for disassembly: 1. Loosen the retaining screw (6). 2. Remove the circlip (3) and, if used, the distance piece (). 3. Insert the forcing disk (7) and the fixed nut (8) between the customer shaft (4) and circlip (3) according to Fig Re-insert the circlip (3).. Re-insert the retaining screw (6). You can now push the gear unit off the shaft Fig. 8: Disassembly 0314AXX (6) Retaining screw (7) Forcing disk (8) Fixed nut for disassembly Type D H7 M C4 C C6 U -0. T -0. D3-0. L4 Assembly/ disassembly kit part number WA.. 16 M Latest News Spiroplan W DT6 Geared Motor 13

14 Technical Data.3 0 Hz motors Motor type P N n N 3~ V I N (3~ 230 V) I N 3~ V (3~ 400 V) [kw] [rpm] [A] [A] cos w I A /I N M A /M N M H /M N DT6M (0.0) 0.31 (0.29) DT6L (0.73) 0.46 (0.42) ~ 230 V [A] ET6L Motor type J 1) J 2) Z 0 M BG Bmax [ -4 kgm 2 ] [ -4 kgm 2 ] [per h] [Nm] DT6M DT6L ET6L ) 1) Without brake 2) With brake 3) No data available at present Hz motors (NEMA/CSA) Motor type P N n N I N 3~ 230V I N 3~ 460V [kw] [rpm] [A] [A] cos w I A /I N M A /M N M H /M N DT6M DT6L ~ 1 V [A] 1~ 230 V [A] ET6L Motor type J 1) J 2) Z 0 M BG Bmax [ -4 kgm 2 ] [ -4 kgm 2 ] [per h] [Nm] DT6M DT6L ET6L ) Without brake 2) With brake 3) No data available at present 3) 0.8. BMG02 brake Brake Type BMG02 For motor size W t 1 t 2I t 2II 1) DT6 ET6 1) With a BME, BMP, BMK or BMH rectifier in the switch cabinet P B Max. braking torque [ 6 J] [ -3 s] [ -3 s] [ -3 s] [W] [Nm] Latest News Spiroplan W DT6 Geared Motor

15 Dimension Sheets 6 6 Dimension Sheets pren 0347 The new dimension designations used in pren 0347 / IEC 72-1 are given in brackets alongside the dimensions in question used in the dimension tables of the dimensions sheets: Dimension Old designation To pren 0347 Diameter G AC Distance from center line to outer contour of G1 AD terminal box Distance from flange surface to end of machine KM LB DT6.. G (AC) 9 G1 (AD) 87 G1B 87 K 26 KB 292 KM (LB) 136 Latest News Spiroplan W DT6 Geared Motor 1

16 6 Dimension Sheets DT6.. G (AC) 9 G1 (AD) 87 G1B 87 K 26 KB 292 KM (LB) Latest News Spiroplan W DT6 Geared Motor

17 Dimension Sheets 6 DT6.. G (AC) 9 G1 (AD) 87 G1B 87 K 26 KB 292 KM (LB) 136 Latest News Spiroplan W DT6 Geared Motor 17

18 6 Dimension Sheets Additional length for DT6../+BMG brake motors 2) k 3 e 1 y G x x 9 3) s 1 G1 st x 9B KM x B 0332AXX DT6../+BMG G 8 G1 87 k 3 48 st 2x 12. 1) 2x 20. 1) x 9 43 x B 36 x 9B 79 x 92 y 76 e 1 0 s 1 M4 Total length of brake motor: BM = KM + x B DT6../+BMG KM 136 x B 36 BM 172 1) Knock-out for M12x1. and M20x1. 2) Manual brake release and terminal box can be turned together through 90 3) Note the space required for removing the fan guard 18 Latest News Spiroplan W DT6 Geared Motor

19 Dimension Sheets 6 Additional length for ET6.. single-phase motors x 1 x 2 d 1 y 1 2) st 0347AXX ET6.. st 1x 12. 1) 1x 20. 1) y 1 38 x x 2 66 d ) Knock-out for M12x1. and M20x1. 2) Note the space required for removing the fan guard Latest News Spiroplan W DT6 Geared Motor 19

20 SEW-EURODRIVE GmbH & Co P.O. Box 3023 D Bruchsal/Germany Phone Fax

Caution: Wear protective goggles danger of chipped pieces! 01733AXX

Caution: Wear protective goggles danger of chipped pieces! 01733AXX This information does not replace the detailed operating instructions! Installation only by trained personnel observing applicable accident prevention guidelines and the operating instructions! 1 Electrical

More information

Revision to the Catalog and to the Operating Instructions , , ,

Revision to the Catalog and to the Operating Instructions , , , Drive Technology \ Drive Automation \ System Integration \ Services Revision to the Catalog 16890426 and to the Operating Instructions 16889614, 16889215, 16888812, 16876016 Mechatronic Drive System MOVIGEAR

More information

Addendum to the Operating Instructions

Addendum to the Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *25821946_0918* Addendum to the Operating Instructions Gear Unit Series R..7, F..7, K..7, K..9, S..7, SPIROPLAN W TorqLOC Plus Hollow

More information

Index. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14

Index. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14 Index A AC motors Mounting position designations... 89 Additional documentation... 12 Add-on encoder cables... 579, 585 Anti-condensation heating... 500 B Backstop... 471 BE brake technical data... 375

More information

2 Important Information, Tables and Dimension Sheets

2 Important Information, Tables and Dimension Sheets Permitted combinations Important Information, Tables and Dimension Sheets.1 Permitted combinations Structure of tables These tables show combinations of gear units and AC (brake) motors that are geometrically

More information

7 Design and Operating Data

7 Design and Operating Data Tolerances Catalog Design and Operating Data.1 Tolerances Shaft heights The following tolerances apply to the indicated dimensions: h 9.84 in -0.0 in h > 9.84 in -0.04 in Foot-mounted gear units: Check

More information

8 Important Information about Tables and Dimension Sheets

8 Important Information about Tables and Dimension Sheets Geometrically possible combinations Important Information about Tables and Dimension Sheets.1 Geometrically possible combinations Structure of the tables These tables show combinations of gear units and

More information

13 Mounting Positions and Dimension Sheets of AC Motors

13 Mounting Positions and Dimension Sheets of AC Motors Mounting position designations for AC motors Mounting Positions and Dimension Sheets of AC Motors.1 Mounting position designations for AC motors Position of motor terminal box and cable entry X 270 (T)

More information

7 Important Information on Selection Tables and Dimension Sheets

7 Important Information on Selection Tables and Dimension Sheets Information on selection tables GK 010 Important Information on Selection Tables and Dimension Sheets.1 Information on selection tables Selection table example AM n e = 1400 rpm 80 Nm i n a M a max F Ra

More information

Edition. DTE / DVE Energy Efficient Motors 10/2003. Catalog / EN

Edition. DTE / DVE Energy Efficient Motors 10/2003. Catalog / EN DTE / DVE Energy Efficient Motors Edition 10/2003 Catalog 11239115 / EN SEW-EURODRIVE Contents 1 The SEW-EURODRIVE Group of Companies... 4 2 Product Description... 6 2.1 Unit designation of energy efficient

More information

* _0916* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Synchronous Linear Motors SL2

* _0916* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Synchronous Linear Motors SL2 Drive Technology \ Drive Automation \ System Integration \ Services *23059311_0916* Revision Synchronous Linear Motors SL2 Edition 09/2016 23059311/EN SEW-EURODRIVE Driving the world Table of contents

More information

Addendum to the Geared Servomotors Catalog

Addendum to the Geared Servomotors Catalog Addendum to the Geared Servomotors Catalog Edition 05/2002 Addendum to the Catalog 1055 761x / EN Addendum to the Geared Servomotors Catalog Changes and corrections have been made to the "Geared Servomotors"

More information

2 Product Description and Overview of Types

2 Product Description and Overview of Types General information Product Description and Overview of Types. General information Power and torque The details on power and torque given in the catalog refer to mounting position M and similar mounting

More information

3 Project Planning of Bucket Elevator Gear Units

3 Project Planning of Bucket Elevator Gear Units Additional documentation Project Planning of Bucket Elevator Gear Units.1 Additional documentation In addition to the information provided in this catalog, SEW-EURODRIVE offers extensive documentation

More information

7 Important information on selection tables and dimension drawings

7 Important information on selection tables and dimension drawings Possible geometrical combinations Important information on selection tables and dimension drawings. Possible geometrical combinations.. Structure of the tables These tables show geometrically possible

More information

Revision MOVITRAC LTE-B * _1114*

Revision MOVITRAC LTE-B * _1114* Drive Technology \ Drive Automation \ System Integration \ Services *13599_1114* Revision SEW-EURODRIVE GmbH & Co KG P.O. Box 303 7664 Bruchsal/Germany Phone +49 751 75-0 Fax +49 751-1970 sew@sew-eurodrive.com

More information

CT/CV Asynchronous Servomotors. 16 CT/CV Asynchronous Servomotors. Price Catalog CT/CV../BM(G) CFT/CFV../BM(G) 52498AXX GSE

CT/CV Asynchronous Servomotors. 16 CT/CV Asynchronous Servomotors. Price Catalog CT/CV../BM(G) CFT/CFV../BM(G) 52498AXX GSE Price Catalog CT/CV Asynchronous Servomotors CT/CV../BM(G) CFT/CFV../BM(G) AXX GSE Unit designation of asynchronous servomotors. Unit designation of asynchronous servomotors Examples CT S /BMG /TF /ESS

More information

Addendum to the Operating Instructions

Addendum to the Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *22286616_0815* Addendum to the Operating Instructions Drive Unit MGF..4..-DSM/XT Design with Increased Torque Edition 08/2015 22286616/EN

More information

Overview of Types and Type Designation Product variants and options

Overview of Types and Type Designation Product variants and options SPIROPLAN gear units W.. WF.. WAF.. WA.. WA..B WH..B WHF.. WH.. WT.. Foot-mounted Flange-mounted type Flange-mounted type and hollow shaft Hollow shaft Foot-mounted, hollow shaft Foot-mounted, hollow shaft

More information

Addendum to the Assembly and Operating Instructions

Addendum to the Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *22866868_0416* Addendum to the Assembly and Operating Instructions SEW-EURODRIVE GmbH & Co KG P.O. Box 3023 76642 Bruchsal/Germany Phone

More information

13 AC motors DT56, DR63

13 AC motors DT56, DR63 Technical data DT56, DR63 AC motors DT56, DR63.1 Technical data DT56, DR63.1.1 3000 rpm - S1 Motor type P N n N I N M N 380-415 V (400 V) kw Nm DR63S2 0.18 0.63 DR63M2 0.25 0.9 DR63L2 0.37 1.3 1) applies

More information

Built-in motors. Contents. Product description 7/2 Overview of technical data 7/3

Built-in motors. Contents. Product description 7/2 Overview of technical data 7/3 Built-in motors Contents Product description 7/2 Overview of technical data 7/3 Motor selection data Series W4.R (corresponds to Efficiency IE3) 7/4 Series WE.R (corresponds to High Efficiency IE2) 7/6

More information

Catalog DRE Gearmotors (IE2)

Catalog DRE Gearmotors (IE2) Drive Technology \ Drive Automation \ System Integration \ Services Catalog DRE Gearmotors (IE2) Edition 11/2013 20152558 / EN SEW-EURODRIVE Driving the world Contents Contents 1 Introduction... 6 1.1

More information

6. Gear Units with Input Options

6. Gear Units with Input Options 6. 6.1. AD input shaft assembly Helical gear unit with AD input shaft assembly SEW Helical, parallel shaft helical, helical-bevel and helical-worm gear units are equipped with an input shaft assembly.

More information

* _1015* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Drive Unit MGF..-DSM

* _1015* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Drive Unit MGF..-DSM Drive Technology \ Drive Automation \ System Integration \ Services *22325816_1015* Revision Drive Unit MGF..-DSM Edition 10/2015 22325816/EN SEW-EURODRIVE Driving the world Contents Contents 1 Revision...

More information

6 Project Planning for Components on the Input Side

6 Project Planning for Components on the Input Side Gear units with IEC or NEMA adapter AM ( GK) Project Planning for Components on the Input Side.1 Gear units with IEC or NEMA adapter AM ( GK) GK Figure 14: Helical-worm gear unit with adapter AM 04588AXX

More information

5 Project Planning for Gear Units

5 Project Planning for Gear Units General information Project Planning for Gear Units.1 General information The planning information provided in this catalog is primarily concerned with the special needs of EBD gear units. For detailed

More information

6 Options and Accessories

6 Options and Accessories Torque arm Options and Accessories.1 Torque arm A torque arm is available to support the reaction torque of hollow shaft gear units in the shaft-mounted version. The torque arm can bear tensile stress

More information

Revision. Mechatronic Drive System MOVIGEAR DBC-B, DAC-B, DSC-B, SNI-B, * _0315*

Revision. Mechatronic Drive System MOVIGEAR DBC-B, DAC-B, DSC-B, SNI-B, * _0315* Drive Technology \ Drive Automation \ System Integration \ Services *21931585_0315* Revision Mechatronic Drive System MOVIGEAR DBC-B, DAC-B, DSC-B, SNI-B, Edition 03/2015 21931585/EN SEW-EURODRIVE Driving

More information

Operating Instructions

Operating Instructions Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services MOVIMOT for Energy Efficient Motors Edition 05/07 11641819 / EN Operating Instructions SEW-EURODRIVE Driving the world

More information

Permanent-magnet synchronous motors

Permanent-magnet synchronous motors Permanent-magnet synchronous motors Contents Product description 12/2 Overview of technical data 12/4 Motor selection data Series PE.. for Super Premium Efficiency IE4 1) 12/5 Series P, high-power motors

More information

Demag KB conical-rotor brake motors. Drives with unique principle

Demag KB conical-rotor brake motors. Drives with unique principle Demag KB conical-rotor brake motors Drives with unique principle 37468 Demag KB conical rotor brake motors: Demag KB conical rotor brake motors offered by Demag Cranes & Components feature a unique principle:

More information

Necessary information regarding the machine to be driven Technical data and environmental conditions Positioning accuracy Travel cycle calculation

Necessary information regarding the machine to be driven Technical data and environmental conditions Positioning accuracy Travel cycle calculation Project planning procedure. Project planning procedure The following flowchart presents a schematic view of the procedure for planning a project incorporating a gear unit with a component on the input

More information

Catalog Mars Low voltage Brake motors

Catalog Mars Low voltage Brake motors Catalog Mars 2014 Low voltage Brake motors We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers processes over the total

More information

Drive Technology \ Drive Automation \ System Integration \ Services. Revision MOVIFIT FC

Drive Technology \ Drive Automation \ System Integration \ Services. Revision MOVIFIT FC Drive Technology \ Drive Automation \ System Integration \ Services Revision MOVIFIT FC Edition 09/2010 17022819 / EN SEW-EURODRIVE Driving the world Type Designation of MOVIFIT FC Sample EBOX nameplate

More information

Operating Instructions

Operating Instructions Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services Gear Units, R..7, F..7, K..7, S..7 Series, SPIROPLAN W A6.B01 Edition 05/2004 11226811 / EN Operating Instructions SEW-EURODRIVE

More information

SWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design

SWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design RANGE OF PRODUCTS Three phase asynchronous squirrel-cage & slip ring induction motors Three phase asynchronous self-braking motors Hollow shaft rotor motors Cooling tower motors High motors, (IE2) (IE3)

More information

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction / Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with

More information

Manual. Conversion Aid MOVIDRIVE MDR60A Regenerative Power Supply Unit Series from DCV185 to DCV200

Manual. Conversion Aid MOVIDRIVE MDR60A Regenerative Power Supply Unit Series from DCV185 to DCV200 Drive Technology \ Drive Automation \ System Integration \ Services Manual Conversion Aid MOVIDRIVE MDR60A1320-503-00 Regenerative Power Supply Unit Series from DCV185 to DCV200 Edition 06/2010 16994426

More information

6 Lubricants. 6 Design and Operating Notes. 6.1 Lubricants. General information

6 Lubricants. 6 Design and Operating Notes. 6.1 Lubricants. General information Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW supplies the drives with a lubricant fill adapted for the specific gear unit and mounting

More information

New Generation 1LE1/1PC1

New Generation 1LE1/1PC1 New Generation LE/PC /2 Orientation /2 Overview /3 Benefits /4 Application /4 Technical specifications /5 Selection and ordering data /7 More information /8 General Line motors with shorter delivery time

More information

Data Sheet. MOVIDRIVE MDX60B/61B/62B, MOVIDRIVE MDR60A/61B MOVIDRIVE compact, MOVIDRIVE A Information regarding UL

Data Sheet. MOVIDRIVE MDX60B/61B/62B, MOVIDRIVE MDR60A/61B MOVIDRIVE compact, MOVIDRIVE A Information regarding UL Drive Technologie \ Drive Automation \ System Integration \ Services Data Sheet MOVIDRIVE MDX60B/6B/62B, MOVIDRIVE MDR60A/6B MOVIDRIVE compact, MOVIDRIVE A Information regarding UL Ausgabe 03/203 20644

More information

Lenze. Drives with worm gearboxes 52.

Lenze. Drives with worm gearboxes 52. 6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de

More information

Energy Saving Three Phase Motors

Energy Saving Three Phase Motors e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality

More information

: B3; B5; B14; B34; B35; V1

: B3; B5; B14; B34; B35; V1 ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia

More information

6 Design and Operating Notes

6 Design and Operating Notes Design and Operating Notes Lubricants Design and Operating Notes. Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for

More information

BSW , -493, -494 Mechanical Rotary Cam Switches. User's Guide. Mechanical Rotary Cam Switches BSW BSW BSW

BSW , -493, -494 Mechanical Rotary Cam Switches. User's Guide. Mechanical Rotary Cam Switches BSW BSW BSW BSW 819-492, -493, -494 User's Guide Mechanical Rotary Cam Switches BSW 819-492 BSW 819-493 BSW 819-494 The CE Marking is your guarantee that our products meet the requirements of EC Directive 89/336/EC

More information

general operation and maintenance instructions

general operation and maintenance instructions general Installation and maintenance work is to be carried out by qualified personnel only. WÖHWA cannot be held responsible for any damages caused by improper installation or maintenance work. Before

More information

5 Project Planning for Gear Units

5 Project Planning for Gear Units Efficiency of gear units Project Planning for Gear Units.1 Efficiency of gear units General information The efficiency of gear units is mainly determined by the gearing and bearing friction. Keep in mind

More information

4 Mounting Positions. Mounting Positions General information on mounting positions. 4.1 General information on mounting positions 54 (BSF.., PSF..

4 Mounting Positions. Mounting Positions General information on mounting positions. 4.1 General information on mounting positions 54 (BSF.., PSF.. M M6 General information on mounting positions Mounting Positions. General information on mounting positions Mounting position designations for BSF.. helical-bevel servo gear units SEW-EURODRIVE distinguishes

More information

8 Design and Operating Notes

8 Design and Operating Notes Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for the specific gear unit and

More information

Standardmotoren Standard motors

Standardmotoren Standard motors Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard

More information

4 Project planning for drives

4 Project planning for drives Additional publications Project planning for drives. Additional publications For more detailed information about the project planning for drives, refer to the website of SEW-EURODRIVE where you can download

More information

Catalog. AC Motors DRS, DRE, DRP DT56, DR63, DVE 250/280. Drive Technology \ Drive Automation \ System Integration \ Services

Catalog. AC Motors DRS, DRE, DRP DT56, DR63, DVE 250/280. Drive Technology \ Drive Automation \ System Integration \ Services Drive Technology \ Drive Automation \ System Integration \ Services Catalog AC Motors DRS, DRE, DRP 71 315 DT56, DR63, DVE 50/80 Morskate Aandrijvingen BV Oosterveldsingel 7A 7558 Edition PJ Hengelo 01/010

More information

Gearmotors \ Industrial Gear Units \ Drive Engineering \ Drive Automation \ Services. Gearmotors A3.D01. Catalog. Edition 04/ / EN

Gearmotors \ Industrial Gear Units \ Drive Engineering \ Drive Automation \ Services. Gearmotors A3.D01. Catalog. Edition 04/ / EN Gearmotors \ Industrial Gear Units \ Drive Engineering \ Drive Automation \ Services Gearmotors A3.D0 Edition 04/2004 22560 / EN Catalog SEW-EURODRIVE Driving the world Contents The SEW-EURODRIVE Group

More information

Installation Instructions

Installation Instructions Drive Technology \ Drive Automation \ System Integration \ Services *22151400_0615* Installation Instructions Electric Cylinders CMS71 Lubricators Edition 06/2015 22151400/EN SEW-EURODRIVE Driving the

More information

Datasheet. Pitch Motor PMSM SP190C8

Datasheet. Pitch Motor PMSM SP190C8 Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor

More information

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature

More information

Datasheet. Pitch Motor PMSM SP190F8

Datasheet. Pitch Motor PMSM SP190F8 Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor

More information

Addendum to the Assembly and Operating Instructions

Addendum to the Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services Addendum to the Assembly and Operating Instructions Explosion-Proof Industrial Gear Units Helical and Bevel-Helical Gear Units X.. Series

More information

Assembly Instructions

Assembly Instructions Drive Technology \ Drive Automation \ System Integration \ Services *2450452_0617* Assembly Instructions Didactics - Gear Unit Technology Helical Gear Unit R57F AD2 Edition 06/2017 2450452/EN SEW-EURODRIVE

More information

Operating Instructions

Operating Instructions Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services BMG..T Double Disc Brakes for Stage Applications A6.C86 Edition 06/2004 11295228 / EN Operating Instructions SEW-EURODRIVE

More information

Drive Technology \ Drive Automation \ System Integration \ Services. Latest News. Synchronous Servomotors CMP112

Drive Technology \ Drive Automation \ System Integration \ Services. Latest News. Synchronous Servomotors CMP112 Drive Technology \ Drive Automation \ System Integration \ Services Latest News Synchronous Servomotors 112 Edition 09/2013 20220545 / EN SEW-EURODRIVE Driving the world Contents Contents 1. Market situation...

More information

ABB Oy MV Induction Machines

ABB Oy MV Induction Machines PIE / J.Suihkonen 3.7.28 En 2..28 448HF3 45534397 82B B: J.Suihkonen /4 Driven Motor: Compressor Motor type code HXR 5LJ2 Motor type Squirrel cage motor Type of Ex-protection Ex na II T3X Mounting designation

More information

THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC

THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC 60034-30 1st EDITION IE1/IE2-MS IE1/IE2-EG Series IE1 Standard efficiency IE2 High efficiency THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS

More information

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings

More information

Modular Explosion Proof Brakes. IECLine rev 0

Modular Explosion Proof Brakes. IECLine rev 0 Modular Explosion Proof Brakes IECLine 2013 rev 0 Application example Standard B5 motor + VIS brake Standard B5 motor + VIS brake + gearbox unit Main Characteristics -PATENT pending design and concept

More information

M6 General information regarding the mounting positions

M6 General information regarding the mounting positions M1 General information regarding the mounting positions.1 General information regarding the mounting positions Designation of the mounting positions SEW-EURODRIVE differentiates between six mounting positions

More information

AC Square Motors. Electric. AMP Series kw HP Nm (at 1500rpm) Catalogue-2017/12 EU

AC Square Motors. Electric. AMP Series kw HP Nm (at 1500rpm) Catalogue-2017/12 EU C Square Motors Catalogue-2017/12 EU MP Series 112-355 16-1300 21-1750 HP 102-8280 (at 1500) 1 Electric 2 Table of contents GENERL FORMTION...5 BSIC DESIGN...6 IEC standard....6 Insulation...6 Temperature

More information

5 Project Planning for Gear Units

5 Project Planning for Gear Units Efficiency of SEW gear units Project Planning for Gear Units.1 Efficiency of SEW gear units General information The efficiency of gear units is mainly determined by the gearing and bearing friction. Keep

More information

CMS Electric Cylinder. Addendum to the Operating Instructions. Edition 11/ / EN

CMS Electric Cylinder. Addendum to the Operating Instructions. Edition 11/ / EN Drive Technology \ Drive Automation \ System Integration \ Services CMS Electric Cylinder Edition 11/2007 11704217 / EN Addendum to the Operating Instructions SEW-EURODRIVE Driving the world Contents Contents

More information

SINGLE PHASE TEFC CAGE MOTORS

SINGLE PHASE TEFC CAGE MOTORS SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current

More information

DYNA GEAR. The highly dynamic servo right angle gearbox.

DYNA GEAR. The highly dynamic servo right angle gearbox. MS- Gr a es s ne r GmbH & Co. K G THE GEAR COM PAN Y The highly dynamic servo right angle gearbox Internal highlights The design of the DynaGear range has been influenced by extremely varied applications

More information

ELECTRIC MOTORS. Selection. Starting torque and nominal torque

ELECTRIC MOTORS. Selection. Starting torque and nominal torque SELECTION PROCEDURE The output powers published overleaf are based upon continuous maximum rating conditions. Therefore design factors for above average running periods do not normally affect the selection.these

More information

Installation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0

Installation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:

More information

Low Voltage Induction Motors

Low Voltage Induction Motors Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0,18-315 kw t-telectric.com Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72,

More information

7 Selections and dimensions - Overview

7 Selections and dimensions - Overview Error! Bookmark not defin ed. Selections and dimensions - Overview Possible combinations table Selections and dimensions - Overview.1 Possible combinations table These tables show the possible physical

More information

* _0817* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. MOVIMOT MM..D with AC Motors DT/DV

* _0817* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. MOVIMOT MM..D with AC Motors DT/DV Drive Technology \ Drive Automation \ System Integration \ Services *23582456_0817* Revision MOVIMOT MM..D with AC Motors DT/DV Edition 08/2017 23582456/EN SEW-EURODRIVE Driving the world Amendments/revisions

More information

QuarryMaster. Helical-Bevel Geared Motors

QuarryMaster. Helical-Bevel Geared Motors QuarryMaster Helical-Bevel Geared Motors It runs and runs and runs and runs... Are you unearthing large quantities on an ongoing basis? Do you sometimes move huge masses? Standstill is not part of your

More information

FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information

FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information (E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN

More information

Design features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake

Design features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features

More information

Assembly and Operating Instructions

Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services Assembly and Operating Instructions Gear Units R..7, F..7, K..7, S..7, SPIROPLAN W Series Edition 06/2010 16970411 / EN SEW-EURODRIVE

More information

2 Product Description and Overview of Types

2 Product Description and Overview of Types Product Description and Overview of Types Variable speed gearmotors VARIBLOC and VARIMOT variable speed gearmotors are simple and robust drives used for infinitely variable mechanical speed control in

More information

6 Project Planning for Optional Accessories

6 Project Planning for Optional Accessories Mounting flange on output shaft Project Planning for Optional Accessories.1 Mounting flange on output shaft Usage Gear units can be supplied with an EBD mounting flange on the LSS (option "/EF22" or "/EF21").

More information

High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable

High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable KD High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable Electrical accessories S-ET p. 341 The KD series have external rotor

More information

Company name: GSI Created by: SLK Phone: (65) Date: 13/03/2017 Client: Client Number: Contact:

Company name: GSI Created by: SLK Phone: (65) Date: 13/03/2017 Client: Client Number: Contact: Qty. Description 1 2L Product No.: 81U1332 The motor is a 3-phase AC standard motor. Installation: Range of ambient temperature: -2.. C Flange size for motor: FF Note! Product picture may differ from actual

More information

SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates

SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates Motor Starter Protectors/Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates Overview Enclosures For stand-alone installation of 3RV20

More information

BSW , -204 Inductive Rotary Cam Switches. User's Guide. Rotary Cam Switches BSW BSW

BSW , -204 Inductive Rotary Cam Switches. User's Guide. Rotary Cam Switches BSW BSW BSW 86-0, -04 User's Guide Rotary Cam Switches BSW 86-0 BSW 86-04 Balluff GmbH Schurwaldstrasse 9 7765 Neuhausen a.d.f. Germany Tel. +49 758 7-0 Fax +49 758 500 balluff@balluff.de www.balluff.com Read

More information

1LG0 Low-voltage Motors

1LG0 Low-voltage Motors Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application

More information

3 Nomenclature. Nomenclature Overview. 3.1 Overview

3 Nomenclature. Nomenclature Overview. 3.1 Overview Overview Catalog.1 Overview The nomenclature (model number) of a gear unit or gearmotor starts from the output shaft. For a gear unit, the nomenclature consists of nine fields, as shown in the two examples

More information

Viking In-Line Helical Gear Reducers

Viking In-Line Helical Gear Reducers Page 615.1 Gear Ratio Range: (varies by reducer size) Output Speeds (with 1750 rpm input) Reducer Horsepower Range: From 2.63:1 to 38.0:1 (Varies by reducer size) 46 665 rpm.5 HP (.37 kw) to 350 HP (261

More information

Electromagnetic clutch-brake combinations INTORQ

Electromagnetic clutch-brake combinations INTORQ Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview

More information

Datasheet. Pitch Motor PMSM SP260B8

Datasheet. Pitch Motor PMSM SP260B8 Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor

More information

Modular Flameproof Brakes

Modular Flameproof Brakes Modular Flameproof Brakes New, Easy, Strong 2012 rev 0 INDEX PAG1 PAG2 PAG3 PAG4 PAG5 PAG6 PAG7 PAG8 PAG9-12 About VIS Application example, Main characteristics, Standards Certificates and available protection

More information

6 Design and Operating Notes

6 Design and Operating Notes Reduced backlash gear units GSE Design and Operating Notes.1 Reduced backlash gear units Helical, parallel shaft helical and helical-bevel gear units with reduced backlash are available from gear unit

More information

MTF. Technical features

MTF. Technical features Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V, 60Hz and 200-240V, 50Hz ( types are supplied without capacitor); suitable for use with an inverter from 20Hz

More information

CE Marking. Number of poles. Core Length. Frame size

CE Marking. Number of poles. Core Length. Frame size 269 Electric Motors General Information CHALLENGE series three phase asynchronous AC electric motors, Are totally enclosed fan cooled (IC-411) squirrel caged type, With IP55 enclosure protection, Class

More information

Description CMP servomotors are delivered with 2-pole resolvers as standard. Further information on other resolvers is available on request.

Description CMP servomotors are delivered with 2-pole resolvers as standard. Further information on other resolvers is available on request. Motor types Standard type encoders 11 11 Motor types 11.1 Standard type encoders 11.1.1 Resolver Type designation /RH1M Description CMP servomotors are delivered with 2-pole resolvers as standard. Further

More information

Operating Instructions

Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services Operating Instructions MOVIAXIS MultiAxis Servo Inverter Information regarding UL Edition 0/0 685 / EN SEWEURODRIVE Driving the world

More information

MVSS. Technical features

MVSS. Technical features Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V 60Hz and 200-240V, 50Hz; suitable for use with an inverter from 20Hz to the base frequency with constant torque

More information