Information & Assessment Form

Transcription

1 Configura Rise and Recline Information & Assessment Form To complete an online assessment, please visit the Configura website at Rise & Recline

2 APPROPRIATE FOR: Ambulant, semi-ambulant & non-ambulant users Users at risk of pressure damage Subject to professional assessment, users with current pressure damage Users with Oedema legs and/or fluid build-up Users with a Kyphosis Accommodation & encouragement of good posture Users with Neurological conditions NOT APPROPRIATE FOR: 1 Demanding postural requirements 2 Users with fixtures and contractures 4 Users who need to be transported from room to room 5 Bariatric users 3 Users with a limited extension at the knees DID YOU KNOW? INTENDED ENVIRONMENT Domestic use You can ente r and store your assessm ent online at ra.uk.com? Click on reg ister. Care homes or nursing homes and are trademarks belonging to Accora Ltd unless otherwise stated. As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice. Accora Ltd Accora: info@accora.uk.com 2

3 Prescriber details Name:... Department:... Address: Telephone: user details Name:... Address: Telephone: User weight:... Pressure care:... Posture:... Mobility:... Diagnosis:... Prognosis:... Transfer method:... Current seating:... Problems with current seating:... Notes: Accora:

4 Standard chair specification Configura Rise & Recline gives benefits to the user and the prescriber: easy adjustment before and after delivery, pressure care options and simple recyclable, removable and washable covers. There are 8 chairs in this range, creating 114 size options. Low-high risk pressure care options 8 posture options Wide range of size requirements Single, dual motor tilt-inspace or dual motor non tilt-in-space 114 size options (8 standard chair sizes) Safety functions 4 integrated, interchangeable pressure care options Lead time 2-3 days * For further information on the integrated self-supply overlay please see page 6. Accora: info@accora.uk.com 4

5 SIZE Key thoughts: n 3 measurements are required for selecting a chair; seat depth, seat height and seat width see below drawings for clarity. n When selecting a chair size, prioritise the chair measurements in the following order: seat depth, seat height then seat width. This will ensure the selected size is the right overall proportion for the user. n If you cannot find the size you need, check out the other chairs in our range or contact us as we may be able to supply a special size. note The green highlighted options denote standard or default chair specification. Seat depth Seat height Seat width CHAIRS A B C D Select Select Select Select Mechanism Chair Weight Seat Width Seat Height Seat Depth Single Motor Dual Motor Dual Motor Capacity Tilt-in-space Tilt-in-space Non Tilt-in-space * 17 ** N/A N/A Extra Small 20 stone * 18 ** Small 20 stone * 20 ** N/A N/A Small Tall 25 stone * 20 ** Medium 25 stone * 18 ** N/A N/A Medium Low 20 stone * 20 ** Large 25 stone * 18 ** N/A N/A Large Low 20 stone * 20 ** Extra Large 25 stone * 18 ** N/A N/A Extra Large Low 20 stone Price of chairs on application = standard option = includes 2 Depth Adjustment Kit * = includes 1 Height Adjustment Kit ** = includes 2 Height Adjustment Kit = Special request on longer delivery time - please call for details. n If you can not find the exact size, select the closest size on a priority of 1) seat depth 2) seat height and 3) seat width. n Be aware of the size adjustments possible after delivery. n In some circumstances it may be appropriate to compromise 1-2 on size. n The overall size of chair cannot be changed after delivery. For example you cannot change a Small chair into a Medium. n Height and Depth Adjustment Kits can be added or removed later. n Seat width is the least important measurement. Accora: info@accora.uk.com 5

6 PRESSURE Key thoughts: n Selection of pressure cushions is a clinical decision which involves many variables including a risk assessment tool. Professional input from a Tissue Viability Nurse or District Nurse may be required at this stage. n Vapour permeable fabric as standard on seat base and legrest. PRESSURE CARE OPTIONS Description Long description Part number Select Visco Prevention: Heat sensitive memory foam moulds to the user providing maximum support and pressure reduction. Suitable for users who are at risk of pressure damage. 160kg (25 stone) weight capacity. CUVIS-0-CF1-020 Extra Small CUVIS-0-CF1-120 Small CUVIS-0-CF1-220 Medium, Medium Low Profile CUVIS-0-CF1-320 Large, Large Low Profile CUVIS-0-CF1-420 Extra Large, Extra Large Low Profile Castellated Prevention: Castellated, pressure reducing cushion for users who cannot tolerate Visco foam. Similar in performance to the Visco cushion. 160kg (25 stone) weight capacity. (Not available on Extra Small). CUFOM-0-CF1-120 Small CUFOM-0-CF1-220 Medium, Medium Low Profile CUFOM-0-CF1-320 Large, Large Low Profile CUFOM-0-CF1-420 Extra Large, Extra Large Low Profile Cushionair Management: powered air cushion for users who have developed pressure damage. Weight capacity: 127 kg (280 lbs, 20 stone). KITCA-0-CF1-000 Extra Small KITCA-0-CF1-100 Small KITCA-0-CF1-200 Medium, Medium Low Profile KITCA-0-CF1-300 Large, Large Low Profile KITCA-0-CF1-400 Extra-Large, Extra Large Low Profile Drop-in overlay Chair supplied with 18 x18 x3 cut-out to accept self-supply cushion of similar dimensions. Not available on Extra Small or Extra Large chairs. OVLSS-0-CF1-120 Small OVLSS-0-CF1-220 Medium OVLSS-0-CF1-320 Large Accora: info@accora.uk.com 6

7 Description Long description Part number Select Vapour Permeable Vapour Permeable fabric on seat base and legrest for maximum pressure reduction. Fabric is 4-way stretch, wipeable and breathable. Standard fabric as per chair body Non-pressure reducing. OVL-0-CF1-040 Extra Small OVL-0-CF1-140 Small, Small Tall OVL-0-CF1-240 Medium, Medium Low Profile OVL-0-CF1-340 Large, Large Low OVL-0-CF1-440 Extra Large, Extra Large Low Profile Vapour Permeable fabric on backrest Vapour Permeable fabric on backrest to provide increased comfort and pressure reduction. BRMAPKT-0-CF2-020 Extra Small BRMAPKT-0-CF1-220 Small, Small Tall, Medium, Medium Low Profile, Large, Large Low Profile, Extra Large, Extra Large Low Profile Visco and Vapour Permeable fabric on armrests Visco and Vapour Permeable fabric on armrests for increased comfort and pressure reduction. ARMCV-L-CF1-120 (LHS) ARMCV-R-CF1-120 (RHS) Extra Small, Small, Medium Low Profile, Large Low Profile and Extra Large Low Profile ARMCV-L-CF1-220 (LHS) ARMCV-R-CF1-220 (RHS) Medium, Large and Extra Large Accora:

8 POSTURE Key thoughts: n Tilt-in-space can significantly improve midline sitting so increased lateral support may not be necessary if the user tends to slump mildly to one side. n The Multi-adjustable Pillow Backrest is more adjustable than the Lateral Support Backrest and Adjustable Lateral Support System because filling can be removed to accommodate different postural requirements. POSTURE MANAGEMENT OPTIONS Description Long description Part number Select Multi-adjustable Pillow Backrest 2 x Lateral Supports Lateral Support Backrest Accommodation: Each pillow is height adjustable and filling can be customised to the user. Offering mild to moderate postural support, the Multi-adjustable Pillow Backrest is highly effective for users with a kyphosis or a scoliosis. Excellent for postural accommodation and comfort. Accommodation: Lateral Supports to fit underneath the backrest pillows to provide mild lateral support combined with the comfort and adjustability of the Multi-adjustable Pillow Backrest. (As used with Adjustable Lateral Support System below). Encouragement: The Lateral Support Backrest encourages a midline sitting position and is suitable for users who require increased lateral support. Users with neurological conditions (including MS) will benefit from the firm but comfortable support. Ideal for flexible posture. MALLS-0-CF1-000 BRLSB-0-CF1-040 Extra Small BRLSB-0-CF1-140 Small, Small Tall BRLSB-0-CF1-240 Medium, Medium Low Profile BRLSB-0-CF1-340 Large, Large Low Profile Adjustable Lateral Support Backrest Management/correction: Contoured foam backrest with adjustable Velcro Lateral Supports. Excellent for providing more aggressive lateral support and mild positioning/correction. Supplied with breathable, pressure reducing fabric. Lateral Supports can also be fitted at shoulder level to minimise the tendency to lean to one side. (Not available in VP fabric). BRMAL-0-CF1-100 Small, Small Tall BRMAL-0-CF1-200 Medium, Medium Low Profile BRMAL-0-CF1-300 Large, Large Low Profile, Extra Large, Extra Large Low Profile Cut-down Lateral Support System Accommodation/Management: Comprises the lower half of the Lateral Support Backrest to give support at the pelvic region and two backrest pillows to provide accommodation at the middle and upper back. BRLSBKTL-0-CF1-240 Accora: info@accora.uk.com 8

9 POSTURE MANAGEMENT OPTIONS Description Long description Part number Select 1/4 Depth Adjustment Pillow Headrest For use with the Lateral Support Backrest and Adjustable Lateral Support System to adjust its angle. Either to tilt it backwards or forwards or from one side to the other. Can also be used under the seat cushion to accommodate or correct a pelvic obliquity. As per the top pillow on the Multi-adjustable Pillow Backrest. KITQU-0-CF1-001 Profiled Headrest Suitable for users with reduced head control. Fits over the shoulders. HRPF-0-CF mm Arm Height Increase Armrest overhang on outside 30mm arm increase in arm height to provide increased arm and elbow support which can assist the user to maintain a good midline sitting position. Not available with Visco and Vapour Permeable Fabric. Standard arm height is 180mm from seat overlay. This adjustment increases the arm height to 210mm. Provides a good grip to assist the user rolling from side to side for easier fitting of slings. ARMHA-L-CF1-140 (LHS) ARMHA-R-CF1-140 (RHS) Extra Small, Small, Medium Low Profile, Large Low Profile ARMHA-L-CF1-240 (LHS) ARMHA-R-CF1-240 (RHS) Medium and Large CONFARMRESTORIEN Armrest overhang on inside Reduces width between armrests by approximately 1.5. Provides extra arm and elbow support if the user is pear shaped or very thin. CONFARMRESTORIEN Accora: info@accora.uk.com 9

10 extras Description Long description Part number Select Single Motor Tilt-in-space Mechanism This is the standard mechanism and should be selected for users who cannot reposition themselves. It eliminates shear forces on the user s back, provides a seat ramp to reduce the tendency to slip forwards in the chair and is good for circulation and pressure relief as the user s ankles elevate higher than the hips. Not available with Extra Small, Medium Low Profile, Large Low Profile and Extra Large Low Profile. N/A Dual Motor Tilt-in-space Mechanism Similar to the Single Motor Tilt-in-space but with an extra motor which provides backrest recline. This should normally be selected for users who have the ability to reposition themselves as the shear forces from extra backrest recline can cause the user to slip forward in the chair. Suitable for users who have skeletal issues and need regular alterations in position or users who sleep in the chair. Note: that the motor controlling the backrest can be disconnected after delivery converting the chair to Single Motor Tilt-in-space. N/A Dual Motor Non Tilt-in-space Offers independent legrest and backrest functions and does not have Tilt-in-space. Suitable for users who cannot tolerate Tilt-in-space. Does not elevate ankles above hips as the Tilt-in-space mechanisms do. (Not available on Extra Small). N/A Accora: info@accora.uk.com 10

11 Description Long description Part number Select Rise setting 30 degrees of tilt. The most frequently used rise setting. This provides a gentle, progressive movement. Medium Rise setting Flat Rise setting 20 degrees of tilt. There is not a specific user group for this setting it is normally used. if Rise or Flat Rise is inappropriate. (not available on Extra Small, Small, Medium Low, Large Low, XL Low chairs and Dual Motor Non Tilt-in-space chairs). 10 degrees of tilt and 10 of rise. (not available on Extra Small, Small, Medium Low, Large Low, XL Low chairs and Dual Motor Non Tilt-inspace chairs). MEDRS-0-CF1-000 FTRS-0-CF1-000 Channel Legrest Provides side support on legrest to reduce abduction. (Not available on Extra Small). LFCHN-0-CF1-020 Extra Small LFCHN-0-CF1-120 Small, Small Tall LFCHN-0-CF1-220 Medium, Medium Low Profile LFCHN-0-CF1-320 Large, Large Low Profile LFCHN-0-CF1-420 Extra Large, Extra Large Low Profile Right hand control Handset fited to right hand side of chair. Left hand control Handset fitted to left hand side of chair. CONFIGHSETFIT Carer control Fitted to backrest out of user reach. CARERCON Accora: info@accora.uk.com 11

12 Description Long description Part number Select Castors 3.5 (90mm) Height Adjuster Drop Down Armrests Housekeeping wheels to allow the chair to be moved for cleaning/ hoisting. Not to be used for movement of the chair room to room. Increase the selected seat height by 2. Cannot be used in conjunction with 1, 2 or 3 height adjustment kits. Provides 3.5 (90mm) of clearance underneath chair. Cannot be used in conjunction with 2 Height Adjustment kit. Not available on Small non-tilt-in-space chairs. Please note these armrests should not be used for users who need to press down on the armrests for transfers. (Not available on Extra Small). CASTCP-0-CF1-000 KITHA-0-CF1-200 Ask for details SAFETY Environmental Controls: Environmental control systems are compatible with our chair control systems. Please contact the product specialist or the main office for further details and specifications. Description Long description Part number Select Emergency Lower Battery Back Up For use in case of power cuts allows one chair cycle to get User out of trouble. Battery should be replaced after each use. Provides Battery Back Up in case of power cuts. Approx 20 cycles. TNSFM-0-CF1-200X BBU-0-CF1-000 Riser Control System Safety Barrier Allows the therapist or carer to disconnect selected chair functions, for example the riser, tilt or backrest recline functions, via a simple switch at the back of the chair. Safety Barrier around all four sides of the chair to avoid entrapment risk. SCOS-0-CF3-100 SSK-0-CF1-100 Small SSK-0-CF1-200 Medium SSK-0-CF1-300 Large, Extra Large Accora: info@accora.uk.com 12

13 OVERALL DIMENSIONS Weight (Please note these are approximate) Complete chair Backrest Base part only including components Base part only excluding components kg 9 kg 38.2 kg 33.6 kg Dimensions (Please note these are approximate) In normal sitting: Height 1090 mm Width Small: 730 mm Medium: 780 mm Large: 830 mm Depth 890 mm In recline: Height Single motor: 950 mm Dual motor: 730 mm Width Small: 730 mm Medium: 780 mm Large: 830 mm Depth Single motor: 1480 mm Dual motor: 1745 mm In rise: Height 1500 mm Width Small: 730 mm Medium: 780 mm Large: 830 mm Depth Backrest height 960 mm 740 mm Floor to top of arms Small: 560 mm Medium: 610 mm Arm height Height to front of seat in rise Height to back of seat in rise 180 mm 550 mm 760 mm Degrees of tilt-in-space 27 Degrees of rise 22º Accora: info@accora.uk.com 13

14 cleaning instructions for the fabric Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. The new generation of Microfibre cleaning cloths without soap are extremely effective for general care and maintenance. You can also wipe clean regularly with a damp cloth to remove dust particles and light soiling. It is recommended to vacuum the upholstery once a week. Most stains can be removed by wiping clean. Remove spillages promptly (within 15 minutes) with cold water. For extreme soiling control use a 5% Sodium Hypochlorite (Bleach) solution. Do not machine wash or dry clean. Do not apply other chemicals such as polish, solvents or stain remover. Accora: info@accora.uk.com 14

15

16 Accora Ltd Charter House Barrington Road Orwell Cambridge SG8 5QP T: F: CON B 002 BRO-CF-002UK REV 1