Cadex C8000. Advanced programmable battery testing system

Size: px
Start display at page:

Download "Cadex C8000. Advanced programmable battery testing system"

Transcription

1 Cadex C8000 Advanced programmable battery testing system The Cadex C8000 battery testing system is equipped with digital drivers to handle batteries from 50mAh to 100Ah. Put performance in your hands with cell monitoring, safety circuit checks and SMBus battery testing. Capture load signatures from power tools, laptops, etc. and use the simulated loads to check battery runtime. Add accessories such as thermal chambers and external load banks and you begin to realize that the Cadex C8000 stands in a class by itself.

2 By all imagination, the Cadex C8000 may well be the most complete battery testing system available An instrument that tests virtually any power source One of the most enduring qualities of the Cadex C8000 is its flexibility and ease of use. The system offers a broad testing range and can service non-battery power sources such as fuel cells and solar cells. Voltage range 1.2V to 36V Current up to 10A charge & discharge Tests batteries from 50mAh to 50Ah I/O Ports provide independent service Each of the 4 channels features a Battery Port and I/O Port that can individually be programmed. Floating analog inputs allow cell monitoring. The system includes: 4-wire battery test cables 4 differential analog voltage inputs 4 input/output control for switching SMBus, clock, data for smart packs 2 general purpose analog inputs The C8000 as part of a laboratory system Optional accessories transform the C8000 into a powerful laboratory system, enabling fully automated testing. Each channel can form its own test bed to control: Thermal chambers External chargers Digital load banks Heating elements Pressure gauges Cell monitoring Safety circuits Alarms

3 Unique features make the Cadex C8000 exclusive The Cadex C8000 offers many powerful features that go beyond testing of batteries. The system set-up is simple and intuitive; it requires minimal training by the technical staff. Load signature acquisition Charger Function Test Battery Safety Circuit Test The C8000 captures and stores load signatures. Checks battery runtime by using the simulated load as discharge protocol. (1Q08) The C8000 tests battery chargers by substituting the battery with a programmable current/voltage source. Verifies function and correct charge termination. (1Q08) The C8000 identifies high and low battery cut-off points by raising and lowering a simulated voltage. Checks safety circuits of lithiumion and intrinsically safe batteries. Lifecycle test Counts the number of charge/discharge cycles before the battery capacity drops to the preset target level. Plots capacity curve. Smart Battery testing The Cadex C8000 services SMBus batteries by reading and displaying the register settings of the digital circuit. Supports most smart batteries Reads flags to check correct function Assists in the design of smart batteries Test batteries in 30 seconds The QuickSort program identifies cellular batteries as: Good, can be returned to customer Low, suspect pack; needs further testing Poor, faulty pack; remove from service QuickSort is based on the electrochemical dynamic response of the battery, a method that is superior to resistance readings. Like a mechanical arm, a good battery is solid and produces little lag. A weak battery, on the other hand, appears soft and bends to the applied force. QuickSort establishes its test results on the resiliency of the battery. (1Q08)

4 Load test The Cadex C8000 allows testing batteries under GSM, TDMA, CDMA or other discharge protocols; programmable in 50µs; minimum setting is 500µs. Simulated discharge enables quick and convenient performance check to verify runtime and cycle life of various battery types. Battery interface made easy for big and small packs The batteries connect to the Power Ports by designated cables. For small batteries, Cadex offers the Adapter Unit, a device that provides access to the SnapLock Battery Adapter system. Over 1000 Battery Adapters on hand Provides dependable battery interface Allows quick and easy battery change Enables sharing adapters with other Cadex systems Adapter Unit Cadex offers three SnapLock adapter styles: Custom Battery Adapters FlexArm Smart Cable The SnapLock adapters contain C-codes that configure the analyzer to the correct setting. Reprogramming and adding (up to 10) is possible. Specialty adapters available on request The FlexArm services less common batteries. The flexible arms reach the smallest contacts. Magnetic guides keep the battery in position and a temperature sensor monitors the battery. The gold contacts are replaceable. The Cadex Smart Cable services larger batteries that are placed outside the unit. The temperature sensor attaches to the battery by a magnet. Ideal for batteries with protruding terminals.

5 Service programs automate battery tests The service programs of the Cadex C8000 are divided into: Basic, Advanced, Rapid-Test, Custom and Manual. The Jump command allows advancing to the next cycle or repeating the previous function. The programs can be modified to include specialty test requirements. Basic Programs. Prepares, conditions and restores batteries automatically. Charge Applies fast charge; terminates charge when the battery is full; applies trickle charge (depending on battery chemistry) Auto Exercises batteries and applies Recondition if the user-set target capacity cannot be reached (nickel-based batteries). Prime Prepares new and stored batteries for field use by repeated cycling until the maximum capacity is reached. Advanced Programs. Provides automated testing for specialty requirement. Load Test Tests batteries under simulated GSM, TDMA, CDMA or other discharge protocols, programmable in 50µs steps; minimum setting 500µs. Runtime Allows three different discharge levels, programmable in hours and minutes. Simulates and (two-way radio) and other user patterns. Lifecycle Counts the number of charge/ discharge cycles a battery can endure before the capacity drops to the preset target level. Self-Discharge Determines the rate by which a battery loses charge when not in use. Discharge Only Discharges battery for storage and specialty test applications. Extended Prime Applies a 16-hour trickle charge prior to Prime. Prepares difficult to charge batteries. * A battery is an electro-chemical device and the reactance varies with frequency. Different test methods will provide varying readings. ** Scheduled for 3rd quarter 2008 Rapid-Test Programs. Checks battery performance without having to discharge. QuickSort ** Sorts lithium-ion packs into Good, Low and Poor. Adjustable target setting. Test time 30 second. QuickTest ** Measures battery stateof-health; uses reference matrix. (Matrix can be generated with the analyzer s Learn program.) Test time 3 minutes typical. OhmTest Measure battery resistance with DC pulses. Test time 6 seconds* Impedance Measures battery resistance with a 1000-hertz signal. (Only available on channel 1.)* Learn** Provides matrix for QuickTest and QuickSort by running batteries with different state-of-health conditions. Service time 3-8 hours per battery. Manual Mode. Offers manual operation. In manual mode, the instrument is controlled by the information provided by the user. With the absence of automated charge and discharge terminations, supervision is recommended. Custom Programs (via PC) Allows user-defined programs consisting of charge, discharge, recondition, wait and repeat. The service will follow a different path if a certain condition occurs. Customized charge and discharge possible; stores up to 100 Custom Programs. Specialty Programs (via PC) Enables advanced load and circuit testing. Load Signature Acquisition** Tests power source with captured load signature. Charger Function Test** Examines charger functions. Battery Safety Circuit Test** Verifies operation of batteries with safety devices.

6 BatteryLab Software makes the C8000 complete No instrument is complete without well-defined software. Cadex BatteryLab provides a simple, yet powerful interface to control and monitor the analyzer(s). With a PC, the operation shifts from the analyzer s front panel to the PC keyboard. Programming occurs by typing in the required battery parameters or clicking the mouse on a battery model that has previously been entered in the system. BatteryLab displays the readings and real-time graphic. BatteryLab is designed to accommodate 1 to 8 analyzers to service 32 batteries independently (on most PCs). The test results obtained by the C8000 system come in at a fraction of the cost of competitive systems. Product Specifications Independent channels System Battery voltage range Battery test range Charge/discharge current Maximum charge power Maximum discharge power Power management Line voltages Battery chemistries 4; separate Battery Ports and I/O Ports. Desktop or 19 rack mount. Portable version on request. Comes with BatteryLab software for PC. System can be used as stand-alone or with PC. 1.2 to 36V nominal; settable in 1mV increments 1 to 10 serial connection of lithium -ion cells (3.6V/cell) 1 to 18 serial connection of lead acid cells (2.0V/cell) 1 to 25 serial connection of nickel-based cells (1.20V/cell) 50mAh to 50Ah typical. External charger and load bank for larger batteries. 10mA to 10A, settable in 1mA increments. 100W per station; 400W total. Each station can charge at 100W continuously. 80W per station; 320W total. Each station can discharge at 80W simultaneously. Current automatically scales down if power demand is above 80W on discharge or 100W on charge; message indicates scaled service. 90 to 264VAC, 50-60Hz; max 1200W loading on main. Lithium -ion, nickel-metal-hydride, nickel-cadmium, lead-acid. Parameters are changeable; custom charge algorithms possible for specialty chemistry. Battery interface Power Port Supplied 4 Power Cables, 1.8 m (6 ), with banana terminals and alligator clips; 4-wire system; detachable temperature sensor. Maximum current 10A. I/O Port Battery Adapters Supplied 4 DB25 cables, 1.8 m (6 ), open-ended. SnapLock Battery Adapters interface with optional SnapLock Adapter Unit. The Battery Adapter stores up to 10 battery-specific C-codes that configure the analyzer to the correct setting. Maximum current 6A. Charge method Auto Lithium -ion and lead-acid: Constant voltage with current limit. Nickel-based: Constant current with optional Reverse Load Charge method, adjustable from 5-12%. Automatic full charge detection. Manual Open charge protocol; user programmable. Threshold must be set manually.

7 Discharge method Auto Battery service programs Security Display Power failure recovery Accuracy Sample rate Manual Auto Advanced Rapid-Test Custom Manual Can be set to constant current or constant power discharge with BatteryLab. Discharges to set voltage threshold. Pulsed discharge through Load Testing or Custom Program possible. Allows GSM, TDMA, CDMA and other protocols, programmable in 50µs steps, 500µs minimum. Voltages, currents and thresholds are set manually. Grouped into Basic, Advanced, Rapid-Test, Custom and Manual. Jump command advances to the next cycle or retracts to the previous setting. Charge, Auto, Prime. Boost. Load Test, Runtime, Lifecycle, Self-discharge, Discharge Only, Extended Prime. QuickSort ( mAh Li-Ion), QuickTest, Learn (to create QuickSort & QuickTest matrices), OhmTest, AC Impedance. Allows creating and storing 100 customized programs consisting of up to 100 steps per program. Programmable by BatteryLab. The programming decisions are based on voltage thresholds, delta-v, current levels, delta-i, temperature, delta-t, time, number of cycles, open circuit, AC impedance, DC resistance, SMBus flags and other threshold parameter. Open platform, manual entry; tests proceed according to entered settings. Password protection prevents unauthorized access. 5.7 diagonal QVGA resolution (320x240) graphics display with backlight Retains the test data on power failure and resumes when power is restored. The time stamp on power failure and resumption is recorded. +/-0.1% on voltage; +/-0.25% on current; full scale. 10 milliseconds, display updated every 1 second; data logging 1 60 seconds. Battery Ports (4, Front Panel) Battery positive (+); Battery negative (-); Sense positive (+); Sense negative (-); Thermistor input; Thermistor ground (-). I/O Port (DB25, 4, Front Panel) Data Ports (Back) Physical Environmental Firmware Approvals Warranty 4 analog input, 0-5V, 12-bit resolution, floating ground, 0-50V common mode range. 4 on/off 5V TTL levels with open-drain output and 20mA (max) sinking ability. 2 general-purpose analog 0 3.3V I/P. SMBus, clock, data and ground. 3 RS-232; one Ethernet 10/100 for PC connection. Width: 480mm ( ); Depth: 380 mm (15 ); Height: 140 mm (5.51 ) 3U Weight 10 kg (22lb) Recommended operating temperature 41 F to 95 F; (5 C to 35 C) Recommended storage temperatures -20 C to 70 C ( 4 F to 159 F) Upgradeable with BatteryLab (Included with system). CSA 22.2 No: , UL and EN ; RoHS and WEEE compliant; CE marked. Cadex warrants the analyzer against defective materials and workmanship for a period of two (2) years from the original purchase date. BatteryLab software Expandability Computer requirements: PC-BatteryLab software is included in the Cadex C8000 system. Alternatively, the C8000 can be operated as a stand-alone. BatteryLab is designed to accommodate 1 to 8 analyzers to service 32 batteries independently (on most PCs). Dedicated PC with MS Windows XP Professional SP2; Ethernet connector; RS232 (Serial) Port; recommended 1.2 GHz CPU or better; 512 MB of RAM main memory and at least 10 GB free hard disk space. HD free space requirements increases in line with the amount of data retained. Recommended peripherals TBD. Specifications are subject to change

8 ISO 9001 ISO Delivering superior products based on advanced engineering, quality manufacturing and applied innovation Industry leader Cadex is a leading provider of battery test and service equipment. Providing all aspects of battery system design, we combine advanced technology, engineering strength and 25 years of manufacturing excellence. Our award-winning products are sold in over 100 countries. Quality and innovation The Cadex engineering team provides turnkey and custom solutions, specializing in battery charging, analyzing and rapid testing. Our expertise lies in sensing, measurement and digital power electronics. Adhering to the highest standards, we consistently deliver cost-effective and well-performing products. Working with natural beauty Cadex provides an environment that attracts the industry s most talented. Nestled in the natural surrounding on the banks of the Fraser River, Cadex headquarters offers a work atmosphere that promotes creative thinking. The Cadex building accommodates research, engineering, sales and manufacturing. North America Cadex Electronics Inc Fraserwood Way Richmond, BC, Canada V6W 1J6 Tel: ; Fax: info@cadex.com Europe Cadex Electronics Inc. Sprottauer Strasse 12, Nürnberg, Germany Tel: +49 (0) Fax: +49 (0) info@cadex.com Printed in Canada

With features such as QuickSort to check lithium-ion batteries. in 30 seconds and Boost for reviving dead packs, the C7000

With features such as QuickSort to check lithium-ion batteries. in 30 seconds and Boost for reviving dead packs, the C7000 Cadex C7000 C-Series Ba ttery Analyzers The Cadex C7000 Series battery analyzers offers a platform that fulfills virtually all battery testing and conditioning needs. With features such as QuickSort to

More information

C8000. Advanced Battery Analyzer. cadex.com/c8

C8000. Advanced Battery Analyzer. cadex.com/c8 C8000 Advanced Battery Analyzer cadex.com/c8 AN OUT-OF-THIS-WORLD BATTERY ANALYZER CREATED FOR ADVANCED USERS The Cadex C8000 delivers the versatility needed to ensure you get the right performance from

More information

For a downloadable C8000 User Manual, visit: Web: E mail:

For a downloadable C8000 User Manual, visit:  Web:  E mail: Trademark Cadex and BatteryLab are registered trademarks of Cadex Electronics Inc. All other trademarks or registered trademarks mentioned herein are the property of their respective owners. Copyright

More information

Cadex C7000 Series Battery Analyzers

Cadex C7000 Series Battery Analyzers Cadex C7000 Series Battery Analyzers Fast, Simple, Efficient and Innovative Gone are the days when a battery analyzer did nothing more than cycle a battery to eliminate memory. Much has changed with modern

More information

C-CODE TABLES FOR CADEX BATTERY ANALYZERS

C-CODE TABLES FOR CADEX BATTERY ANALYZERS Battery Maintenance Solutions Cadex Electronics Inc. 22000 Fraserwood Way, Richmond, BC Canada V6W 1J6 Tel: 604 231-7777 Fax: 604 231-7755 Toll-Free: 1 800 565-5228 (USA & Canada) E-mail: service@cadex.com

More information

Cadex C7000 C-Series Battery Analyzer User s Manual

Cadex C7000 C-Series Battery Analyzer User s Manual Cadex C7000 C-Series Battery Analyzer User s Manual Cadex C7200, C7400 & C7400ER (C-Series) Cadex Electronics Inc. 22000 Fraserwood Way Richmond, British Columbia Canada V6W 1J6 Tel: +1 604 231-7777 Fax

More information

Product Evaluation. CADEX C7400 Battery Analyzer

Product Evaluation. CADEX C7400 Battery Analyzer Product Evaluation CADEX C7400 Battery Analyzer General The purpose of this product search was to identify and test instrumentation that would prolong the service life of rechargeable batteries in government

More information

PCBA Instruction Manual

PCBA Instruction Manual PCBA 5010-4 Instruction Manual Disclaimer The PCBA 5010-4 has been designed and manufactured with careful consideration to the issues of safety from electrical shock, thermal hazards and RFI compliance

More information

DIN-Rail DC UPS. Powers Loads and Charges Back-Up Battery, Ideal for Automation and Wireless System Transmitter Applications

DIN-Rail DC UPS. Powers Loads and Charges Back-Up Battery, Ideal for Automation and Wireless System Transmitter Applications DIN-Rail DC UPS Powers Loads and Charges Back-Up Battery, Ideal for Automation and Wireless System Transmitter Applications Combines all system power functions: power supply, battery charger, UPS circuitry

More information

IMPRES TM. Smart Energy Systems

IMPRES TM. Smart Energy Systems IMPRES TM Smart Energy Systems Motorola s state-of-the-art IMPRES technology allows communication between the battery and the charger. The result a radio system that s charged and ready to go whenever

More information

Care and Feeding of Rechargeable Batteries. Chris Capener March 1, 2012

Care and Feeding of Rechargeable Batteries. Chris Capener March 1, 2012 Care and Feeding of Rechargeable Batteries Chris Capener March 1, 2012 Battery Types Lead Acid Nickel-Based NiCd NiMH LSD Li-ion Battery Charging Lead Acid Nickel-based Battery Packs Analyzers & Chargers

More information

C5100B Analyzer. cadex.com/c5

C5100B Analyzer. cadex.com/c5 C5100B Analyzer cadex.com/c5 Simplicity at its Best Quick Battery Sorting for Everyone Look no further. The C5100B is your ultimate tool for sorting good batteries from bad, in your store or warehouse.

More information

80V 300Ah Lithium-ion Battery Pack Data Sheet

80V 300Ah Lithium-ion Battery Pack Data Sheet 80V 300Ah Lithium-ion Battery Pack Data Sheet 80 V, 300 amp-hour capacity, maintenance-free energy storage, IP65 design, fully integrated BMS, integrated fuse and safety relay protection, highly configurable

More information

LDX-U20 is a microprocessor controlled DC-UPS rated 20 A usable in 12 V or 24 V systems.

LDX-U20 is a microprocessor controlled DC-UPS rated 20 A usable in 12 V or 24 V systems. LDX-U20 is a microprocessor controlled DC-UPS rated 20 A usable in 12 V or 24 V systems. LDX-U20 monitors the voltage supplied by a DC source and in case of power failure a backup battery is connected

More information

Programming of different charge methods with the BaSyTec Battery Test System

Programming of different charge methods with the BaSyTec Battery Test System Programming of different charge methods with the BaSyTec Battery Test System Important Note: You have to use the basytec software version 4.0.6.0 or later in the ethernet operation mode if you use the

More information

Four-Position Gang Charger for SAFEMTX Li-ION Battery Packs

Four-Position Gang Charger for SAFEMTX Li-ION Battery Packs Four-Position Gang Charger for SAFEMTX Li-ION Battery Packs (P/N 10067285) Instruction Manual " WARNING THIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FOR

More information

KEEP TRACK OF WHAT MATTERS

KEEP TRACK OF WHAT MATTERS KEEP TRACK OF WHAT MATTERS AUTOMATIC PASSENGER COUNTING SOLUTIONS For subways, trains, trams and train stations Automatic Passenger Counting For Subways, Trains, Trams and Train Stations INFODEV offers

More information

Orion BMS Purchasing Guide Rev. 1.2

Orion BMS Purchasing Guide Rev. 1.2 www.orionbms.com Orion BMS Purchasing Guide Rev. 1.2 Main Components... 2 Orion BMS Unit... 2 Current Sensor... 4 Thermistors... 5 CANdapter... 6 Wiring Harnesses... 7 Cell voltage tap wiring harnesses...

More information

Super Brain 969 Pro AC/DC Delta Peak Charger with Dual Output and Discharge Function Instruction Manual Model Rectifier Corporation

Super Brain 969 Pro AC/DC Delta Peak Charger with Dual Output and Discharge Function Instruction Manual Model Rectifier Corporation Super Brain 969 Pro AC/DC Delta Peak Charger with Dual Output and Discharge Function Instruction Manual Model Rectifier Corporation Please read this entire manual, including all Safety Cautions and Warnings

More information

Smart-UPS On-Line Lithium Ion UPS 230V. Single-phase, double conversion online UPS with Li-Ion batteries and advanced management features

Smart-UPS On-Line Lithium Ion UPS 230V. Single-phase, double conversion online UPS with Li-Ion batteries and advanced management features Smart-UPS On-Line Lithium Ion UPS 230V Single-phase, double conversion online UPS with Li-Ion batteries and advanced management features A UPS developed for availability of your most critical loads under

More information

Technical Article. How to implement a low-cost, accurate state-of-charge gauge for an electric scooter. Manfred Brandl

Technical Article. How to implement a low-cost, accurate state-of-charge gauge for an electric scooter. Manfred Brandl Technical How to implement a low-cost, accurate state-of-charge gauge for an electric scooter Manfred Brandl How to implement a low-cost, accurate state-of-charge gauge for an electric scooter Manfred

More information

CENTAURI ENERGY SERVER TECHNICAL DATA kw POWER

CENTAURI ENERGY SERVER TECHNICAL DATA kw POWER Chassis Inverter power Rated input Rated output Battery pack Safeties Environment Others Input Voltage Lower Limit Input Voltage Upper Limit Power Input Current Output Voltage Output accuracy Transient

More information

Special Specification 6058 Battery Back-Up System for Signal Cabinets

Special Specification 6058 Battery Back-Up System for Signal Cabinets Special Specification Battery Back-Up System for Signal Cabinets 1. DESCRIPTION 2. DEFINITIONS Install a Battery Back-Up System (BBU System) for traffic signals that will provide reliable emergency power

More information

Understanding the benefits of using a digital valve controller. Mark Buzzell Business Manager, Metso Flow Control

Understanding the benefits of using a digital valve controller. Mark Buzzell Business Manager, Metso Flow Control Understanding the benefits of using a digital valve controller Mark Buzzell Business Manager, Metso Flow Control Evolution of Valve Positioners Digital (Next Generation) Digital (First Generation) Analog

More information

Fluke 500 Series Battery Analyzers

Fluke 500 Series Battery Analyzers Fluke 500 Series Battery Analyzers Technical Data Intelligent test probe with integrated LCD display Reduced testing complexity, a simplified workflow and an intuitive user interface provide a new level

More information

RF80-K Aircraft Battery Charger / Analyzer

RF80-K Aircraft Battery Charger / Analyzer RF80-K Aircraft Battery Charger / Analyzer Features Automatic Operation Heavy Duty Design And Performance Digital Timing / Display Charges And Analyzes Aircraft Batteries (3-75 AH) One-hour Main Charge,

More information

INTRODUCTION. Specifications. Operating voltage range:

INTRODUCTION. Specifications. Operating voltage range: INTRODUCTION INTRODUCTION Thank you for purchasing the EcoPower Electron 65 AC Charger. This product is a fast charger with a high performance microprocessor and specialized operating software. Please

More information

TORKEL 840/860. Battery Load Units TORKEL 840/860

TORKEL 840/860. Battery Load Units TORKEL 840/860 TORKEL 840/860 Battery Load Units Batteries in power plants and transformer substations must provide the equipment they serve with standby power in the event of a power failure. Unfortunately, however,

More information

l The Battery Tester is designed for measuring the l AC four-terminal method to measure the internal

l The Battery Tester is designed for measuring the l AC four-terminal method to measure the internal Certificate of Calibration We hereby certify that this product has been calibrated and found to be in accordance with the applicable SPECIFICATIONS and STANDARDS. Accuracies of the standard equipment used

More information

Illuminator Series CM. GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION. 500W, 1000W, 1500W and 2000W Single-Phase Emergency Power System

Illuminator Series CM. GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION. 500W, 1000W, 1500W and 2000W Single-Phase Emergency Power System Illuminator Series CM GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION 500W, 1000W, 1500W and 2000W Single-Phase Emergency Power System This description contains all the necessary functional and technical

More information

W SERIES IMPULSE VOLTAGE TEST SYSTEM APPLICATION FEATURES

W SERIES IMPULSE VOLTAGE TEST SYSTEM APPLICATION FEATURES W SERIES IMPULSE VOLTAGE TEST SYSTEM Impulse Voltage Test System is used to generate impulse voltages from 100 KV to 2400 KV simulating lightning strokes and switching surges with energies up to 240 KJ.

More information

SimpliPhi Power PHI Battery

SimpliPhi Power PHI Battery Power. On Your Terms. SimpliPhi Power PHI Battery INTEGRATION GUIDE: VICTRON Optimized Energy Storage & Management for Residential & Commercial Applications Utilizing Efficient, Safe, Non-Toxic, Energy

More information

RF80-M. Features. Lead Acid Batteries Multistep Programmable. Automatic Operation Stores 100 Programs

RF80-M. Features. Lead Acid Batteries Multistep Programmable. Automatic Operation Stores 100 Programs RF80-M CHRISTIE Aircraft Battery Charger / Analyzer Features Nickel Cadmium Batteries Lead Acid Batteries Multistep Programmable Automatic Operation Stores 100 Programs Unique ReFLEX Charging Exclusive

More information

EVO SERIES BATTERY CHARGER SERIES BATTERY CHARGER

EVO SERIES BATTERY CHARGER SERIES BATTERY CHARGER EVO SERIES BATTERY CHARGER SERIES BATTERY CHARGER Evo Series battery charger designed with YOU in mind. Evo Series battery charger is a next generation SCR-based utility battery charger. This evolutionary

More information

QUANTUM LX CONTROL PANEL

QUANTUM LX CONTROL PANEL Form E90-020 SPC (APR 2006) File: EQUIPMENT MANUAL - Section 90 Replaces: E90-020 SPC (JUN 2005) Dist: 1, 1a, 1b, 1c, 4a, 4b, 4c QUANTUM LX CONTROL PANEL The most technologically advanced screw compressor

More information

Super Brain 977. AC/DC Charger with Dual Output and Discharge Function. User s Manual. Model Rectifier Corporation

Super Brain 977. AC/DC Charger with Dual Output and Discharge Function. User s Manual. Model Rectifier Corporation Super Brain 977 AC/DC Charger with Dual Output and Discharge Function User s Manual Model Rectifier Corporation 80 Newfield Avenue Edison, NJ 08837-3817 Phone: 732-225-6360 www.modelrectifier.com Please

More information

Traffic Logix SafePace 100 Radar Speed Sign Product Specifications Version 2.7

Traffic Logix SafePace 100 Radar Speed Sign Product Specifications Version 2.7 Traffic Logix SafePace 100 Radar Speed Sign Product Specifications Version 2.7 1 Table of Contents Dimensions... 3 Technical Specifications... 4 Communication... 5 Programming... 6 Data Collection and

More information

Small size High power

Small size High power YOUR POWER TESTNG SOLUTON T8900A/E Series High Power DC Electronic Load Small size High power T8900A/E Series High Power DC Electronic Load APPLCATONS ndustry Server power supply Communication power supply

More information

Power Conversion Systems 2005/2006. Schaefer the Power to make it happen.

Power Conversion Systems 2005/2006. Schaefer the Power to make it happen. Power Conversion Systems 2005/2006 Schaefer the Power to make it happen. Company profile workforce experience customer orientation flexibility reliability Schaefer Elektronik, founded in 1969, has grown

More information

To put integrity before opportunity To be passionate and persistent To encourage individuals to rise to the occasion

To put integrity before opportunity To be passionate and persistent To encourage individuals to rise to the occasion SignalQuest, based in New Hampshire, USA, designs and manufactures electronic sensors that measure tilt angle, acceleration, shock, vibration and movement as well as application specific inertial measurement

More information

Low Profile DC Power Supply with Zero Voltage Soft Switching

Low Profile DC Power Supply with Zero Voltage Soft Switching Sorensen XFR Series Low Profile DC Power Supply with Zero Voltage Soft Switching Analog programming Zero voltage soft switching Constant voltage or constant current operation with automatic crossover and

More information

Sealed Lead-Acid Batteries

Sealed Lead-Acid Batteries Sealed Lead-Acid Batteries FEATURES Sealed/Maintenance-Free The valve regulated, spill-proof construction of the Power-Sonic battery allows trouble-free, safe operation in any position. There is no need

More information

Power Conversion System The Best Technology for your photovoltaic and storage system

Power Conversion System The Best Technology for your photovoltaic and storage system The Best Technology for your photovoltaic and storage system The Best Technology for your photovoltaic and storage system EEI. Experience and Reliability since 1978 EEI s mission started in 1978 coming

More information

RH Series Battery Testers

RH Series Battery Testers RH Series Battery Testers 10340 Palmer Rd., S.W. Pataskala, OH 43062 RHSBTP-3-12 Copyright 2012 All Rights Reserved Ph: 740-964-4000 Fx: 740-927-6017 www.redhawkenergy.net Battery Testers Avoid Costly

More information

FUTUR / FUTUR smart. Energy. Endurance. Performance.

FUTUR / FUTUR smart. Energy. Endurance. Performance. FUTUR / FUTUR smart Energy. Endurance. Performance. MAXIMUM EFFICIENCY You can t get any more efficient than this With the new TriCOM FUTUR, we introduce the first fully resonant switching HF (High Frequency)

More information

Installation Guide Smart-UPS On-Line SRT1000/1500 UXI-NCLI, SRT1000/1500 UXI-LI, Tower/Rack-Mount

Installation Guide Smart-UPS On-Line SRT1000/1500 UXI-NCLI, SRT1000/1500 UXI-LI, Tower/Rack-Mount Installation Guide Smart-UPS On-Line SRT1000/1500 UXI-NCLI, SRT1000/1500 UXI-LI, Tower/Rack-Mount Important Safety Messages Read the instructions carefully to become familiar with the equipment before

More information

CONTENTS TABLE OF CONTENTS... 1 INTRODUCTION... 2 SEC 1 - SPECIFICATIONS... 3 SEC 2 - DESCRIPTION... 5 SEC 3 - OPERATING INSTRUCTIONS...

CONTENTS TABLE OF CONTENTS... 1 INTRODUCTION... 2 SEC 1 - SPECIFICATIONS... 3 SEC 2 - DESCRIPTION... 5 SEC 3 - OPERATING INSTRUCTIONS... CONTENTS SUBJECT PAGE TABLE OF CONTENTS... 1 INTRODUCTION... 2 SEC 1 - SPECIFICATIONS... 3 SEC 2 - DESCRIPTION... 5 SEC 3 - OPERATING INSTRUCTIONS... 8 SEC 4 - BATTERY CHARGING NOTES... 9 SEC 5 - VERIFICATION

More information

RF80-M. Features. Lead Acid Batteries Multistep Programmable. Automatic Operation Stores 100 Programs

RF80-M. Features. Lead Acid Batteries Multistep Programmable. Automatic Operation Stores 100 Programs RF80-M CHRISTIE Aircraft Battery Charger / Analyzer Features Nickel Cadmium Batteries Lead Acid Batteries Multistep Programmable Automatic Operation Stores 100 Programs Unique ReFLEX Charging Exclusive

More information

User Manual Solar Charge Controller 3KW

User Manual Solar Charge Controller 3KW User Manual Solar Charge Controller 3KW Version: 1.3 CONTENTS 1 ABOUT THIS MANUAL... 1 1.1 Purpose... 1 1.2 Scope... 1 1.3 SAFETY INSTRUCTIONS... 1 2 INTRODUCTION... 2 2.1 Features... 2 2.2 Product Overview...

More information

Itech Portable Lithium Battery Safety Test Solutions

Itech Portable Lithium Battery Safety Test Solutions Itech Portable Lithium Battery Safety Test Solutions IT6400 Bipolar Dual-Channel DC Power Source, New Arrival Keywords: wearable devices, portable devices, handheld devices, mobile communications devices,

More information

Automatic DC Power Supply/Battery Charger

Automatic DC Power Supply/Battery Charger Automatic DC Power Supply/Battery Charger PATENTED U.S. 9,270,140; 9,385,556; 9,413,186; 9,509,164 NEW in 2015: Field selectable AC input voltage in high-powered units Automatic battery commissioning mode

More information

Critical Safety Elements in Smart Battery Pack Design

Critical Safety Elements in Smart Battery Pack Design Critical Safety Elements in Smart Battery Pack Design Smart Battery Data Expo Portable Design Conference January 15, 2002 Iilonga Thandiwe Staff Engineer Motorola Energy Systems Group Safety Circuit Design

More information

ADJUSTABLE FREQUENCY CRANE CONTROLS

ADJUSTABLE FREQUENCY CRANE CONTROLS IMPULSE G+ MINI ADJUSTABLE FREQUENCY CRANE CONTROLS The IMPULSEG+ Mini from Magnetek continues our history of providing the most reliable and cost-effective adjustable frequency crane controls available.

More information

HYPERION EOS 5i. User s Manual. Power, with Ease

HYPERION EOS 5i. User s Manual. Power, with Ease HYPERION EOS 5i User s Manual Power, with Ease HYPERION EOS 5i - User s Manual Please read the following instructions carefully, to insure safety and convenience EOS 5i Special Features *Powerful, yet

More information

Batteries for HTM. D. J. McMahon rev cewood

Batteries for HTM. D. J. McMahon rev cewood Batteries for HTM D. J. McMahon 141004 rev cewood 2017-10-09 Key Points Batteries: - chemistry; know the characteristic cell voltages of common chemistries: NiCd/ NiMH 1.2V Hg 1.35V Zn Alkaline 1.5V Ag

More information

Intelligent Pulse Charger/Discharger KP-100W6 USER S MANUAL

Intelligent Pulse Charger/Discharger KP-100W6 USER S MANUAL Intelligent Pulse Charger/Discharger KP-100W6 USER S MANUAL 1. Features... 1 2. Specifications... 1 3. Unit Exterior & Accessories... 2 4. Operation Intro.. 3 5. Lithium battery balance charging information...

More information

Functions and Displays

Functions and Displays Functions and Displays No. 4125 (12V/220V only - Euro-Connector) No. 4127 (12V/220V only - GB-Connector) No. 4129 (12V/110V only US/Japan-Connector) Dear Customer, thank you for purchasing this LRP product.

More information

Sealed Lead-Acid Batteries

Sealed Lead-Acid Batteries Sealed Lead-Acid Batteries FEATURES Sealed/Maintenance-Free The valve regulated, spill-proof construction of the Power-Sonic battery allows trouble-free, safe operation in any position. There is no need

More information

Multifunction Electronic Load (EBC-A10) User Manual EBC-A10 User Manual Copyright (C) ZKE Technology

Multifunction Electronic Load (EBC-A10) User Manual EBC-A10 User Manual Copyright (C) ZKE Technology Multifunction Electronic Load (EBC-A10) User Manual 1. Features 1.1 Battery capacity test The tester is designed for charging lead-acid/lithium battery (pack), and discharge/capacity test of all kinds

More information

Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications

Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a single phase, on-line, double conversion, solid state

More information

Batteries for HTM. Basic Battery Parameters:

Batteries for HTM. Basic Battery Parameters: Batteries for HTM Key Points Batteries: - chemistry; know the characteristic cell voltages of common chemistries: NiCd/ NiMH 1.2V Hg 1.35V Zn Alkaline 1.5V Ag Oxide 1.55V Pb 2.0V Li 3.0V LiIon/ LiPo 3.6V

More information

DATASHEET TECHNICAL INFORMATION. Stationary applications, island solutions

DATASHEET TECHNICAL INFORMATION. Stationary applications, island solutions Multi-Grid - Lithium-ion Battery System ON/OFF-GRID POWER SUPPLY WITH INVERTER SAFE, TURN-KEY READY 24 V DC / 48 V DC - 4 to 12 kwh Scalable and Modular-System (24 V DC / 48 V DC) High energy and power

More information

Versatile and Rugged Industrial LIthium/LiPO Charger Series

Versatile and Rugged Industrial LIthium/LiPO Charger Series Versatile and Rugged Industrial LIthium/LiPO Charger Series Description The M-series is an environmentally robust and sophisticated battery chargers with models supporting Lithium or LiPo batteries. With

More information

ABB June 19, Slide 1

ABB June 19, Slide 1 Dr Simon Round, Head of Technology Management, MATLAB Conference 2015, Bern Switzerland, 9 June 2015 A Decade of Efficiency Gains Leveraging modern development methods and the rising computational performance-price

More information

Sola/Hevi-Duty S3K Series Mini-Tower UPS

Sola/Hevi-Duty S3K Series Mini-Tower UPS Sola/Hevi-Duty S3K Series Mini-Tower UPS GUIDE SPECIFICATIONS 700VA to 1600VA 120V models Single - Phase Uninterruptible Power Supply Systems 1.1 SUMMARY 1.0 GENERAL This specification defines the electrical

More information

MIT515, MIT525, MIT1025, MIT1525

MIT515, MIT525, MIT1025, MIT1525 MIT515, MIT525, MIT1025, MIT1525 Measures up to 30 TΩ Safety rated up to CAT IV 1000 V to 3000 m Unique dual-case design - additional user protection Operates from battery or a.c. mains supply Rapid charge

More information

Belt Scales Table of Contents

Belt Scales Table of Contents Belt Scales Table of Contents Master 311M...164 Medium to Heavy Capacity Weigh Frame Master 221DB...165 Medium to Heavy Capacity Belt Scale Master 211...166 Medium to Heavy Capacity Weigh Frame Master

More information

Operating Instructions CHARGERY C650. Microprocessor controlled high performance rapid charger for LiPo battery packs with cell balancer.

Operating Instructions CHARGERY C650. Microprocessor controlled high performance rapid charger for LiPo battery packs with cell balancer. Operating Instructions CHARGERY C650 Microprocessor controlled high performance rapid charger for LiPo battery packs with cell balancer. Charge current up to 8A, 100W, for 1-6 LiPo cells 8 Chargery Power

More information

LS1024BP/ LS2024BP. Solar Charge Controller USER MANUAL

LS1024BP/ LS2024BP. Solar Charge Controller USER MANUAL EPSOLAR LS1024BP/ LS2024BP Solar Charge Controller USER MANUAL Thank you very much for selecting our product! This manual offers important information and suggestions with respect to installation, use

More information

MX1S Matrix Converter

MX1S Matrix Converter MX1S Matrix Converter Energy-Saving Medium-Voltage Drive with Power Regeneration 4.16 kv, 500 to 4000 HP, UL Listed Also available in 3 kv and 6kV Class Certified for ISO9001 and ISO14001 CERTI F I ED

More information

BLU SERIES Battery Load Units

BLU SERIES Battery Load Units BLU SERIES Battery Load Units Lightweight starting from 12,8 kg (28.2 lbs) Powerful discharge power of up to 28,4 kw Voltage measurement range: 5,25-500 V DC Discharge current up to 340 A DC Easily expandable

More information

Battery Monitoring System

Battery Monitoring System GE Critical Power Battery Monitoring System Battery management at its best gecriticalpower.com GE s Battery Monitoring System If you re operating mission critical systems relying on the protection of a

More information

EVO AT SERIES BATTERY CHARGER

EVO AT SERIES BATTERY CHARGER EVO AT SERIES BATTERY CHARGER AT SERIES BATTERY CHARGER P R O D U C T PATENT PENDING hindlepowerinc.com 610-330-9000 Evo AT Series battery charger designed with YOU in mind. Evo AT Series battery charger

More information

User Manual. Solar Charge Controller 3KW

User Manual. Solar Charge Controller 3KW User Manual Solar Charge Controller 3KW 1 CONTENTS 1 ABOUT THIS MANUAL... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 SAFETY INSTRUCTIONS... 3 2 INTRODUCTION... 4 2.1 Features... 4 2.2 Product Overview... 5

More information

Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications

Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a stand-by, three-phase, solid state Lighting Inverter System

More information

Battery Monitoring Why Technology Matters. Mats Karlstrom V.P. Sales & Marketing, Alber

Battery Monitoring Why Technology Matters. Mats Karlstrom V.P. Sales & Marketing, Alber Battery Monitoring Why Technology Matters Mats Karlstrom V.P. Sales & Marketing, Alber 1 Agenda Introduction Why is battery monitoring needed? Example of battery failure Why are resistance measurements

More information

Analog Input Terminal

Analog Input Terminal Analog Input Terminal I/O Interface Converts Analog Input Data into Binary Data Four inputs available. High resolution of 1/6000. Conversion is possible within a range of 5% to 105% FS. High conversion

More information

DC Electronic Loads simulate NTC devices for temperature monitoring in battery test applications

DC Electronic Loads simulate NTC devices for temperature monitoring in battery test applications DC Electronic Loads simulate NTC devices for temperature monitoring in battery test applications This application note discusses the use of programmable DC loads to simulate temperature sensors used in

More information

Lithium battery charging

Lithium battery charging Lithium battery charging How to charge to extend battery life? Why Lithium? Compared with the traditional battery, lithium ion battery charge faster, last longer, and have a higher power density for more

More information

EV Display User Guide

EV Display User Guide EV Display User Guide CleanPowerAuto LLC Brief Description: EV Display is designed to track battery state of charge and other related data in battery powered Electric Vehicle. EV Display is primarily designed

More information

Marsh McBirney Flo-Dar

Marsh McBirney Flo-Dar Marsh McBirney Flo-Dar Accurate Flow Measurement Flo-Dar TM provides the user with highly accurate flow measurements under a wide range of flows and site conditions. By measuring the velocity of the fluid

More information

Top quality For industrial use

Top quality For industrial use HAND PALLET TRUCK SCALES RAVAS-110 Pallet truck scale with basic scale functions BENEFITS: The RAVAS work horse All basic scale functions Competitive pricing Low power consumption For checking incoming

More information

Dynamic DC Emulator Efficient testing of charging technology and power electronics

Dynamic DC Emulator Efficient testing of charging technology and power electronics Dynamic DC Emulator Efficient testing of charging technology and power electronics Highlights Efficient testing of charging technology The Scienlab ChargingDiscoverySystem (CDS) can be combined with the

More information

Explosion-Proof Painting Robots

Explosion-Proof Painting Robots Explosion-Proof Painting Robots up to 20 kg payload Kawasaki Robotics (USA), Inc. EXPLOSION-PROOF PAINTING ROBOTS The K-Series line of painting robots combines high operational performance with powerful

More information

Super Brain 992 Palm Charger

Super Brain 992 Palm Charger Super Brain 992 Palm Charger INSTRUCTION MANUAL Features and Specifications DC charger with separate AC power supply included (DC input of 12V to 18V) Large backlit LCD Adjustable charge rate from 0.2

More information

Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications

Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a three phase, on-line, double conversion, solid state Uninterruptible

More information

Keysight Technologies Battery Temperature Profiling While Charging and Discharging. Application Note

Keysight Technologies Battery Temperature Profiling While Charging and Discharging. Application Note Keysight Technologies Battery Temperature Profiling While Charging and Discharging Application Note 02 Keysight Battery Temperature Profiling While Charging and Discharging - Application Note Why is Temperature

More information

All In one uninterruptible power supply solutions

All In one uninterruptible power supply solutions All In one uninterruptible power supply solutions For the life of your systems with Battery Care concept Integrated Electronic Solution Yet another strong proposition from Adelsystem, result of the continuing

More information

BLU SERIES Battery Load Units

BLU SERIES Battery Load Units BLU SERIES Battery Load Units Lightweight starting from 12,8 kg (28.2 lbs) Powerful discharge power of up to 28,4 kw Voltage measurement range: 5,25-500 V DC Discharge current up to 340 A DC Easily expandable

More information

Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications

Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. The Defender Mini CLI specification describes a single phase, online, solid state Lighting

More information

Fluidic Oscillation Compact Heat Meter

Fluidic Oscillation Compact Heat Meter Fluidic Oscillation Compact Heat Meter Application The Superstatic 749 is an autonomous compact thermal energy meter consisting of a flow meter a detachable integrator with a wide range of communications

More information

General Description. BADICHEQ 3000 (Battery Diagnostic & Charge Equalizing) The compact solution for perfect battery management

General Description. BADICHEQ 3000 (Battery Diagnostic & Charge Equalizing) The compact solution for perfect battery management General Description BADICHEQ 3000 1 Chapter1: Introduction I: The problem General Description BADICHEQ 3000 (Battery Diagnostic & Charge Equalizing) The compact solution for perfect battery management

More information

engineered to order solutions

engineered to order solutions DM-Series engineered to order solutions for Transformer Bushing and Partial Discharge (PD) Monitoring Features & Benefits Bushing Monitoring Partial Discharge Monitoring Optional Thermal Modelling with

More information

ASPIRO & GUARDIAN BATTERY MANAGEMENT WITH ACC EXTENDED CONTROLLER

ASPIRO & GUARDIAN BATTERY MANAGEMENT WITH ACC EXTENDED CONTROLLER DESCRIPTION Battery management is implemented in the Aspiro and Guardian DC Power Systems using the ACC Extended (ACX) controller. ASPIRO & GUARDIAN BATTERY MANAGEMENT WITH ACC EXTENDED CONTROLLER The

More information

Elite Power Solutions Automatic Battery Control (ABC) Operation Manual

Elite Power Solutions Automatic Battery Control (ABC) Operation Manual Elite Power Solutions Automatic Battery Control (ABC) Operation Manual Elite Power Solutions 335 E Warner Rd. STE 3 Chandler, AZ 85225 www.elitepowersolutions.com ABC Operation Manual Page 1 Table of Contents

More information

Illuminator Series CR NEMA 3R

Illuminator Series CR NEMA 3R Illuminator Series CR NEMA 3R GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION For 3.0, 4.0, 5.0, 6.5, 8.0kVA / kw Series CR - Single Phase Uninterruptible Power System This description contains all the

More information

SP5 INSTALLATION AND SETUP MANUAL

SP5 INSTALLATION AND SETUP MANUAL SP5 INSTALLATION AND SETUP MANUAL 1 Installation 1.1 Introduction The SP5 System consists of a Data Acquisition unit (DAQ) with two complete Roller control channels, each Roller Control Channel consists

More information

Designing Applications with Lithium-Ion Batteries

Designing Applications with Lithium-Ion Batteries Application Note Roland van Roy AN025 Sep 2014 Designing Applications with Lithium-Ion Batteries Contents 1. Introduction...1 2. Single Li-Ion Cell as Power Source...2 3. Battery Charging...6 4. Battery

More information

ENGINEERED TO ORDER SOLUTIONS

ENGINEERED TO ORDER SOLUTIONS DM-Series ENGINEERED TO ORDER SOLUTIONS for Transformer Bushing, Winding Hot Spot and PD Monitoring Features & Benefits Advanced Analytics Flexible and Modular Hardware Platform Bushing Monitoring Optional

More information

Lithium Ion Battery Charger for Solar-Powered Systems

Lithium Ion Battery Charger for Solar-Powered Systems Lithium Ion Battery Charger for Solar-Powered Systems General Description: The is a complete constant-current /constant voltage linear charger for single cell Li-ion and Li Polymer rechargeable batteries.

More information