REFERENCE SPECIFICATIONS

Size: px
Start display at page:

Download "REFERENCE SPECIFICATIONS"

Transcription

1 No. SX-DSV03190 REFERENCE SPECIFICATIONS MODEL Product Nam: AC srvo drivr Modl: MINAS A6BE Sris Issud on Fb. 15, 2017 (Rvisd on Apr.28,2017) Motor Businss Unit, Elctromchanical Control Businss Division Automotiv & Industrial Systms Company, Panasonic Corporation Morofuku, Daito-City, Osaka , Japan Phon: Fax:

2 REVISIONS No. SX-DSV03190 Dat Pag Rv. Dscription Signd Fb. 15, Initial Rlas - Apr. 28, 2017 Appndix 1.0 Add th Dfault of th paramtrs - P3 Add th Product Cods and Conformanc Tstd - Corrct th rrors

3 No. SX-DSV03190 Contnts 1.Scop Modl numbr Product Lin-up Standard typ Spcifications Apparanc and Nams Dimnsions Configuration of connctors and trminal blocks Powr connctors XA, XB, XC, XD and trminal blocks USB connctor X EthrCAT connctors X2A X2B I/O connctor X Encodr connctor X Monitor connctor X Intrfac Circuit Wiring and systm configuration Usd cabls and maximum cabl lngths Cabl Sid Connctor Prcautions for wiring Dynamic brak Mounting dirction and spacing Complianc with global standards Conforming standards Europan EC dirctiv Priphral dvic configuration List of priphral dvics applicabl to srvo drivr Complianc with UL standard Radio wavs act (South Kora) prcautions Complianc with SEMI F47 instantanous stop standard Harmonic supprssion masurs Safty prcautions Lifspan Lifspan xpctancy of th srvo drivr Typical lifspan Warranty Othrs... 64

4 No. SX-DSV03190 Appndix: Spcification for ach modl Appndix: I/O connctor (X4) dfault stting Appndix tabl: Dfault of th paramtrs

5 No. SX-DSV Scop Th spcifications ar for AC srvo drivr MINAS-A6BE Sris mad by Motor Businss Unit, Elctromchanical Control Businss Division, Automotiv & Industrial amplifir Systms Company, Panasonic Corporation. Th products spcifid on this documnt can b usd for industrial purposs only. Do not us in a gnral houshold. <About EthrCAT> EthrCAT (Ethrnt for Control Automation Tchnology) is opn ntwork communication using ral-tim- -Ethrnt btwn mastrs and slavs dvlopd by Bckhoff Automation GmbH. ETG (EthrCAT Tchnology Group) has control ovr it. EthrCAT is rgistrd tradmark and patntd tchnology, licnsd by Bckhoff Automation GmbH, Grmany. <IMPORTANT> All rights rsrvd. No part of this publication may b rproducd or transmittd in any form without prior prmission. Motor Businss Unit, Panasonic Corporation rsrvs th right to mak modifications and improvmnts to its products and/or documntation, including spcifications and softwar, without prior notic. This product might rquir upgrad according to th spcifications chang rqustd by ETG. W do not hav liability for xpnss of such upgrads.

6 No. SX-DSV Modl numbr Th modl numbr is structurd as follows: M A D L N 1 5 B E * * * Classification srvo drivr Siz A: Siz A B: Siz B C: Siz C D: Siz D E: Siz E F: Siz F Spcific Modl Functionality E: Standard typ AC Srvo driv L: A6 family Intrfac B: EthrCAT Safty function N: Without safty I/F Output classification This mans adaptd motor siz Powr supply voltag 1: Singl phas 100 V 3: 3 phas 200 V 5: Singl or 3 phas 200 V

7 No. SX-DSV Product Lin-up 3-1 Standard typ Modl No. Product Cod (Not 1) EthrCAT Conformanc Tst (Not 2) Siz Powr supply input Ratd output of applicabl motor (Not 3) MADLN01BE Max 50 W Singl-phas AC V MADLN11BE Max 100 W A MADLN05BE Max 100 W Singl/3-phas AC V MADLN15BE Max 200 W MBDLN21BE Singl phas AC V Max 200 W B MBDLN25BE Singl/3-phas AC V Max 400 W MCDLN31BE Singl phas AC V Max 400 W C MCDLN35BE Singl/3-phas AC V Max 750 W MDDLN45BE Max 1000 W D Singl/3-phas AC V MDDLN55BE Max 1500 W MEDLN83BE A Max 2000 W E 3-phas AC V MEDLN93BE B Max 2400 W MFDLNA3BE C Max 3000 W F 3-phas AC V MFDLNB3BE D Max 5000 W (Not 1) This is th Product cod of our Srvo Driv writtn in th ESI fil (Hx numral). (Not 2) This shows that this product has passd th EthrCAT conformanc Tst conductd at EthrCAT tst cntr. (Not 3) Som of th combinations shown in this tabl cannot b usd dpnding on motors. For th combination of a drivr and a motor, rfr to MINAS-A6 sris catalog.

8 No. SX-DSV Spcifications Basic spcifications Itm Dscription Input powr supply 100 V 200 V Main circuit powr Control circuit powr A-D Main circuit powr E-F Control circuit A-D Singl phas V (+10 %/-15 %) 50/60 Hz Singl phas V (+10 %/-15 %) 50/60 Hz Singl/3-phas V (+10 %/-15 %) 50/60 Hz 3-phas V (+10 %/-15 %) 50/60 Hz Singl phas V (+10 %/-15 %) 50/60 Hz powr E-F Singl phas V (+10 %/-15 %) 50/60 Hz Opration tmpratur: 0-55 dgrs C (no frzing) Tmpratur Storag tmpratur: dgrs C Opration conditions Humidity (Max.tmpratur guarant : 80 dgrs C for 72 hours without dw condnsation *not) Opration and storag humidity: %RH or lss (no dw condnsation prmittd *not) Elvation 1000 m or lss abov sa lvl Vibration 5.88 m/s 2 or lss, Hz Insulation voltag Rsistant to 1500 V AC btwn primary powr supply and ground for a minut Control mthod IGBT PWM mthod, sinusoidal driv Encodr fdback 23Bit(rsolution: ) 7cors-srial absolut ncodr 8 x multi-function input ports Input Control Function of ach multi-function input is assignabl by paramtr. signal 3 x multi-function output ports Output Function of ach multi-function output is assignabl by paramtr. Analog signal Output 2 x output ports for analog monitor Puls signal Output 2 x output ports Lin drivr output for ncodr pulss (A/B signal) EthrCAT Intrfac for motion control. Communication USB USB intrfac to connct to computrs for paramtr stting or status monitoring. Front panl 1 2-digit rotary switch 22-digit 7-sgmnt LED, 4 x LED for status indication 3Monitor connctor Rgnration Siz A, B: Extrnal rgn rsistor only Siz C - F: Built-in rgn rsistor (Extrnal rgn is also availabl) Dynamic brak Siz A - F: Built-in Control mod Position control: Profil position mod (pp), Cyclic synchronous position mod (csp), Homing mod (hm) Vlocity control: Profil vlocity mod (pv), Cyclic synchronous vlocity mod (csv) Torqu control: Torqu profil mod (tq), Cyclic synchronous torqu mod (cst) Ths mods ar switchabl ach othr with commands through EthrCAT. (*not) Plas not that condnsation tnd to occur whn tmpratur fall.

9 No. SX-DSV Apparanc and Nams Siz A, B 100 V / 200 V X7: Monitor connctor (Molx) Front panl Charg lamp XA: Powr supply input connction 05JFAT-SAXGGKK-A (JST) XA: Powr supply input S05B-F32SK-GGXR (JST) XB: Motor output S06B-F32SK-GGXR (JST) X1: USB connction UB-M5BR-S14-4S(LF)(SN) (JST) X2A: EthrCAT connctor (RX) MOD-WRJ88LY1G-TP+ (HTK) X2B: EthrCAT connctor (TX) MOD-WRJ88LY1G-TP+ (HTK) XB: Motor connction 06JFAT-SAXGGKK-A (JST) X4: Paralll I/O connction DF02R026NA2 (JAE) X6: Encodr connction 3E KAV (3M) XA: Powr supply input connction Earth connction scrw XB: Motor connction L1 L2 L3 L1C L2C Main powr supply input Control powr supply input P N B U V W Rgnrativ rsistor connction Motor output

10 No. SX-DSV Siz C, D 100 V / 200 V Charg lamp Front panl X7: Monitor connctor (Molx) XA: Powr supply input S05B-F32SK-GGXR (JST) 相当品 XB: Motor output S06B-F32SK-GGXR (JST) X1: USB connction UB-M5BR-S14-4S(LF)(SN) (JST) X2A: EthrCAT connctor (RX) MOD-WRJ88LY1G-TP+ (HTK) X2B: EthrCAT connctor (TX) MOD-WRJ88LY1G-TP+ (HTK) XA: Powr supply input connction 05JFAT-SAXGGKK-A (JST) XB: Motor connction 06JFAT-SAXGGKK-A (JST) Earth connction scrw X4: Paralll I/O connction DF02R026NA2 (JAE) XA: Powr supply input connction XB: Motor connction L1 L2 L3 L1C L2C P RB B U V W Main powr supply input Control powr supply input Rgnrativ rsistor connction Motor output X6: Encodr connction 3E KAV (3M)

11 No. SX-DSV Siz E 200 V Charg lamp XA: Powr supply input S05B-JTSLSK-GSANXR (JST) XB: Motor output S03B-JTSLSK-GSANXR (JST) X7: Monitor connctor (Molx) XC: Rgnrativ rsistor connction S04B-JTSLSS-GSANXR (JST) Front panl X1: USB connction UB-M5BR-S14-4S(LF)(SN) (JST) X2A: EthrCAT connctor (RX) MOD-WRJ88LY1G-TP+ (HTK) X2B: EthrCAT connctor (TX) MOD-WRJ88LY1G-TP+ (HTK) XA: Powr supply input connction 05JFAT-SAXGSA-L (JST) XC: Rgnrativ rsistor connction 04JFAT-SAXGSA-L (JST) XB: Motor connction 03JFAT-SAXGSA-L (JST) X4: Paralll I/O connction DF02R026NA2 (JAE) X6: Encodr connction 3E KAV (3M) Main powr supply input Control powr supply input L1 L2 L3 L1C L2C Rgnrativ rsistor connction P RB B N Motor output U V W XA: Powr supply input connction Earth connction scrw XC: Rgnrativ rsistor connction XB: Motor output

12 No. SX-DSV Siz F 200 V Front panl Charg lamp X1: USB connction UB-M5BR-S14-4S(LF)(SN) (JST) X2A: EthrCAT connctor (RX) MOD-WRJ88LY1G-TP+ (HTK) X7: Monitor connctor (Molx) X2B: EthrCAT connctor (TX) MOD-WRJ88LY1G-TP+ (HTK) X4: Paralll I/O connction DF02R026NA2 (JAE) X6: Encodr connction 3E KAV (3M) Earth connction scrw L1 Main powr supply input L2 L3 Control powr supply input L1C L2C P Rgnrativ rsistor connction RB B N U Motor output V W R1.0 Motor Businss Unit, Panasonic Corporation

13 No. SX-DSV Exampl of a nam plat Modl numbr Srial numbr P N Lot numbr Month of production Yar of production (Lowr 2 digit of AD yar) QR cod Standard mark Input/Output voltag Numbr of phas Ratd input/output currnt Input/Output frquncy Ratd output of applicabl motor Manufactur dat Country of origin Manufactur dat Manufactur month Manufactur yar

14 No. SX-DSV Front panl 2-digit 7-sgmnt LED RUN LED (grn) Link/Activity IN LED (grn) ERROR LED (rd) Link/Activity OUT LED (grn) X7-1pin 2-digit rotary switch for nod Addrss stting Stting rang:0 - FF Analog monitor connctor(x7)

15 No. SX-DSV Dimnsions Siz A 100 V / 200 V 2-M4 Effctiv scrw dpth 7 Nam plat 2-M4 Effctiv scrw dpth 7 Unit: mm * Plas do not us th scrw hols of no dscription of th siz.

16 No. SX-DSV [Rack-mounting TYPE (Option: Mountd on th front)] Mounting brackt (Option) Nam plat Mounting brackt (Option) Unit: mm *Plas do not us th scrw hols of no dscription of th siz. *Mounting brackt is optional parts. Mounting brackt dos not shippd with th product.

17 No. SX-DSV Siz B 100 V / 200 V 2-M4 Effctiv scrw dpth 6.5 Nam plat 2-M4 Effctiv scrw dpth 7 Unit: mm *Plas do not us th scrw hols of no dscription of th siz

18 No. SX-DSV [Rack-mounting TYPE (Option: Mountd on th front)] Mounting brackt (Option) Nam plat Mounting brackt (Option) Unit: mm *Plas do not us th scrw hols of no dscription of th siz. *Mounting brackt is optional parts. Mounting brackt dos not shippd with th product.

19 No. SX-DSV Siz C 100 V / 200 V 2-M4 Effctiv scrw dpth 6.5 Nam plat 2-M4 Effctiv scrw dpth 6 Unit: mm *Plas do not us th scrw hols of no dscription of th siz.

20 No. SX-DSV [Rack-mounting TYPE (Option: Mountd on th front)] Mounting brackt (Option) Nam plat Mounting brackt (Option) Unit: mm *Plas do not us th scrw hols of no dscription of th siz. *Mounting brackt is optional parts. Mounting brackt dos not shippd with th product.

21 No. SX-DSV Siz D 200 V 2-M4 Effctiv scrw dpth 6.5 Nam plat 2-M4 Effctiv scrw dpth 6 Unit: mm *Plas do not us th scrw hols of no dscription of th siz.

22 No. SX-DSV [Rack-mounting TYPE (Option: Mountd on th front)] Mounting brackt (Option) Nam plat Mounting brackt (Option) Unit: mm *Plas do not us th scrw hols of no dscription of th siz. *Mounting brackt is optional parts. Mounting brackt dos not shippd with th product.

23 No. SX-DSV Siz E 200 V [Rack-mounting TYPE (Standard)] 4-M4 Effctiv scrw dpth 6 Nam plat 4-M4 Effctiv scrw dpth 6 Unit: mm

24 No. SX-DSV [Bas-mounting TYPE (Chang from standard)] Nam plat Unit: mm

25 No. SX-DSV Siz F 200 V [Rack-mounting TYPE (Standard)] 4-M4 Effctiv scrw dpth 9 Nam plat 4-M4 Effctiv scrw dpth 9 Unit: mm

26 No. SX-DSV [Bas-mounting TYPE (Chang from standard)] Nam plat Unit: mm

27 No. SX-DSV Configuration of connctors and trminal blocks 7-1 Powr connctors XA, XB, XC, XD and trminal blocks Siz A, B 100V / 200 V XA Connctor pin No. Trminal symbol 5 L1 4 L2 Nam Main powr supply input 100 V 200 V Dscription Singl phas + 10 % 50/60 Hz input V - 15 % Us L1 and L3 trminal for singl phas input Singl or 3 phas V + 10 % - 15 % 50/60 Hz input 3 L3 Us L1 and L3 trminal for singl phas input 2 L1C Control powr 100 V supply input 1 L2C 200 V Singl phas V Singl phas V + 10 % - 15 % + 10 % - 15 % 50/60 Hz input 50/60 Hz input XB 6 P 5 N 4 B Rgn rsistor connction Whn a trip happns du to a rgnrativ load protction rror, connct an xtrnal rgnrativ rsistor (prpard by customr) btwn P and B. Thn, spcify th xtrnal rgnrativ rsistor for th paramtr Pr0.16. Do not connct N trminal. 3 U 2 V 1 W Motor connction Connct ach phas of th motor winding. U: U phas V: V phas W: W phas Earth Earth trminal for grounding * Tightn th arth scrws M4 with th Nm torqu rspctivly.

28 No. SX-DSV Siz C, D 100 V / 200 V XA XC XB Connctor pin No. Trminal symbol 5 L1 4 L2 Nam Main powr supply input 100 V 200 V Dscription Singl phas + 10 % 50/60 Hz input V - 15 % Us L1 and L3 trminal for singl phas input Singl or 3 phas V + 10 % - 15 % 50/60 Hz input 3 L3 Us L1 and L3 trminal for singl phas input 2 L1C Control powr 100 V 1 L2C supply input 200 V N P 6 P 5 RB 4 B 3 U 2 V 1 W Rgn rsistor connction Singl phas V - Do not connct. Motor connction Singl phas V + 10 % - 15 % + 10 % - 15 % 50/60 Hz input 50/60 Hz input Normally, short out th circuit btwn B and RB. (Sizs C, D) Whn a trip happns du to a rgnrativ load protction rror, opn th circuit btwn B and RB and connct an xtrnal rgnrativ rsistor (prpard by customr) btwn P and B. Thn, spcify th xtrnal rgnrativ rsistor for th paramtr Pr Connct ach phas of th motor winding. U: U phas V: V phas W: W phas Earth Earth trminal for grounding * Tightn th arth scrws M4 with th Nm torqu rspctivly.

29 No. SX-DSV Siz E 200 V XA Connctor pin No. Trminal symbol 5 L1 4 L2 3 L3 名称内容 Main powr supply input 2 L1C Control powr 1 L2C supply input 200 V 3 phas V 200 V Singl phas V + 10 % - 15 % + 10 % - 15 % 50/60 Hz input 50/60 Hz input XC 4 P 3 RB 2 B 1 N Rgn rsistor connction Normally, short out th circuit btwn RB and B. Whn a trip happns du to a rgnrativ load protction rror, opn th circuit btwn RB and B and connct an xtrnal rgnrativ rsistor (prpard by customr) btwn P and B. Thn, spcify th xtrnal rgnrativ rsistor for paramtr Pr Do not connct N trminal. XB 3 U 2 V 1 W Motor connction Connct ach phas of th motor winding. U: U phas V: V phas W: W phas Earth Earth trminal for grounding * Tightn th arth scrws M4 with th Nm torqu rspctivly.

30 No. SX-DSV Siz F 200 V Trminal block is usd instad of connctor Trminal block Trminal No. (Uppr to bottom) Trminal symbol Nam 1 L1 Main powr 2 L2 supply input 3 L3 4 L1C Control powr 5 L2C supply input 6 P 7 RB 8 B 9 N Rgn rsistor connction 3 phas V + 10 % - 15 % Dscription 50/60 Hz input Singl phas + 10 % 50/60 Hz input V - 15 % Normally, short out th circuit btwn RB and B. Whn a trip happns du to a rgnrativ load protction rror, opn th circuit btwn RB and B and connct an xtrnal rgnrativ rsistor (prpard by customr) btwn P and B. Thn, spcify th xtrnal rgnrativ rsistor for paramtr Pr Do not connct N trminal. 10 U 11 V 12 W Motor connction Earth Connct ach phas of th motor winding. U: U phas V: V phas W: W phas Earth trminal for grounding * Tightn th arth scrws M5 with th Nm torqus rspctivly. * Tightn th trminal block scrws M5 with th Nm torqus rspctivly. * Tightn th fixing scrw M3 for th trminal block covr with th Nm torqu. * If th maximum of tightning torqu is xcdd, th trminal block could b damagd.

31 No. SX-DSV USB connctor X1 By conncting to a computr or a controllr via USB intrfac, th following oprations ar availabl paramtr rfrnc / chang paramtr sav / load monitoring of status chcking alarm status or alarm history Nam Symbol Pin No Dscription VBUS 1 USB signal D- 2 Communicat with a computr or a controllr D+ 3 For manufacturr us 4 Do not connct Signal ground GND 5 Signal ground

32 No. SX-DSV EthrCAT connctors X2A X2B For connction, us RJ45 connctor [X2A] / [X2B] Nam Symbol Connctor pin no. Dscription Ntwork output / input + TX/RX+ 1 Connct to pin 1 on TX connctor of snding sid nod. Ntwork output / input - TX/RX- 2 Connct to pin 2 on TX connctor of snding sid nod. Ntwork input / output + RX/TX+ 3 Connct to pin 3 on TX connctor of snding sid nod. Unusd - 4 Connct to pin 4 on TX connctor of snding sid nod. Unusd - 5 Connct to pin 5 on TX connctor of snding sid nod. Ntwork input / output - RX/TX- 6 Connct to pin 6 on TX connctor of snding sid nod. Unusd - 7 Connct to pin 7 on TX connctor of snding sid nod. Unusd - 8 Connct to pin 8 on TX connctor of snding sid nod. Fram ground - Shll Connct to shild of cabl. * B sur to us shildd twistd pair (STP) compatibl with 5 of TIA/EIA-568 or highr catgory * Auto MDI/MDI-X assigns functions to pin no.1,2,3,6.

33 No. SX-DSV I/O connctor X4 Input signals Nam Symbol Pin No. Dscription Circuit Powr supply input I-COM 6 Connct to positiv/ngativ polarity of th xtrnal powr supply Us a 12 V (±5 %) to 24 V (±5 %) powr supply Insulation is ndd against th primary sid powr supply. Plas do not connct thm with th sam powr supply. Multi-function input 1 SI1 5 Multi-function input 2 SI2 7 Multi-function input 3 SI3 8 Multi-function input 4 SI4 9 Multi-function input 5 SI5 10 Multi-function input 6 SI6 11 Multi-function input 7 SI7 12 Multi-function input 8 SI8 13 Assign functions using paramtrs. For dtails, rfr to th tchnical data Basic function spcification SX-DSV Rang of availabl functions is limitd. For xampl, xtrnal latch input EXT1 can b allocatd only to SI5, EXT2 to SI6 and EXT3 to SI7. For th factory dfault stting, rfr to appndix Spcification for Each Modl. i-1 Output signals Nam Symbol Pin No. Dscription Circuit Multi-function output 1 Multi-function output 2 Multi-function output 3 SO1- SO1+ SO2- SO2+ SO3- SO Assign functions using paramtrs For dtails, rfr to th tchnical data Basic function Spcification SX-DSV For th factory dfault stting, rfr to appndix Spcification for Each Modl. o-1 Encodr output signal Nam Symbol Pin No. Dscription Circuit Phas A output/ Position compar output 1 Phas B output/ Position compar output 2 Position compar output 3 OA+/ OCMP1+ OA-/ OCMP1- OB+/ OCMP2+ OB-/ OCMP OCMP3+ 21 OCMP3-22 Diffrntial output of dividd ncodr signal or xtrnal scal signal (A B phas). (RS422 compatibl) Th ground of lin drivr of output circuit is connctd to th signal ground (GND) and kpt non-insulatd. Maximum output frquncy is 4 Mpuls/s (aftr multiplid by 4). Us a lin rcivr to rciv th diffrntial signals, and connct a trmination rsistor (Approx. 330 Ω) btwn th input trminals of th lin rcivr A twistd-pair cabl with shild is rquird for th wiring, and its shild has to b connctd to th connctor s shll. Z-phas signal is for th position compar output function only. Do-1 Signal ground GND 16 Signal ground B sur to connct th ground of th lin rcivr to this trminal.

34 No. SX-DSV Encodr backup powr input Nam Symbol Pin No. Dscription Circuit Battry input to absolut ncodr BTP-I 14 BTN-I 15 Connct to th absolut ncodr backup battry (rcommndd battry: Toshiba ER6V 3.6 V) BTP-I: positiv, BTN-I: ngativ Th powr ncssary to stor multi-turn data is supplid to th absolut ncodr via BTP-0 (pin 3) and BTN-0 (pin 4) of ncodr connctor (CN2). Us any of th following mthods to connct th battry for absolut ncodr. (1) Dirctly connctd to th motor. (2) Connctd to th ncodr cabl. (3) Connctd to this connctor. Othr Nam Symbol Pin No. Dscription Circuit Rsrvd - 23,24 Do not connct Fram ground FG Shll Connctd to th arth trminal in th srvo drivr. 7-5 Encodr connctor X6 Nam Symbol Pin No. Dscription Encodr powr supply output Absolut ncodr battry backup output (Not 2) E5V 1 Encodr powr supply E0V 2 Ground of ncodr powr supply (Not 1) BTP-O 3 Battry output (+) BTN-O 4 Battry output (-) Encodr signal I/O (diffrntial srial signal) PS 5 Encodr signal No-invrting input and output /PS 6 Encodr signal Invrting input and output Fram ground FG shll Intrnally connctd to th arth trminal. *Not 1) Th E0V of th ncodr powr supply output is connctd with th control circuit ground of th connctor X4. *Not 2) Connctd to th absolut ncodr battry input trminals BTP-I and BTN-I of connctor X4 in th srvo drivr. Whn conncting th battry dirctly to th ncodr connction cabl, lav ths pins unconnctd. 7-6 Monitor connctor X7 Nam Symbol Pin No. Dscription Circuit Analog monitor output 1 AM1 1 Analog monitor output 2 AM2 2 Analog signal output for monitoring Monitoring objct changs according to th paramtr stting. Ao-1 Signal ground GND 3 Signal ground Rsrvd - 4,5 Do not connct

35 No. SX-DSV Intrfac Circuit i-1 o-1 V DC V P S or 4.7k 1000p 1k V DC V 50 ma or lss V DC V Ao-1 S P 4.7k 1000p 1k Pins; S: (X4) 5,7,8,9,10,11,12,13 P: (X4) 6 Pins; +: (X4) 1,3,25 -: (X4) 2,4,26 *Not) To dirctly run th rlay, attach a diod in Paralll with th rlay and in th dirction shown in th figur abov. Do-1 + 1k Twistd Pair + Equivalnt of AM26C31 GND Pins; +: (X7) 1,2 -: (X7) 3 Signal amplitud is ±10 V - GND Pins; +: (X4) 17,20,21 -: (X4) 18,19,22 Connct a trminating rsistor (approx. 330 Ω) btwn th input trminals of th lin rcivr. - 16

36 No. SX-DSV Wiring and systm configuration 8-1 Usd cabls and maximum cabl lngths Nam Symbol Maximum cabl lngth (Not 1) Usd cabl Main powr supply L1,L2,L3 - Rfr to spcification Control powr supply L1C,L2C - Rfr to spcification Motor connction U,V,W, 20 m Rfr to spcification Earth cabl - Rfr to spcification Encodr connction X6 20 m I/O connction X4 3 m EthrCAT connction X2A, X2B 100 m (Not 2) Collctivly shildd twistd-pair cabl Cor cabl: 0.18mm 2 or mor TIA/EIA-568 CAT5 STP *Not 1)Ths s do not nsur your work nvironmnt but man our tsting status. *Not 2) Rfr to Connction to connctors X2A X2B. 8-2 Cabl Sid Connctor Connctor symbol Part nam Part numbr Manufacturr Soldr plug DF02P026F22A1 (soldring typ) X4 JAE Shll kit DF02D026B22A X6 Rcptacl Shll kit 3E KV 3E M JAPAN X7 Connctor Trminal Molx Us connctors listd abov or quivalnts.

37 No. SX-DSV Prcautions for wiring Wiring to powr connctor and trminal block 100/ 200 V sizs A - B Built-in thrmostat of an xtrnal rgnrativ rsistor (light yllow) ON OFF MC1 ALM Coli surg supprssion units Powr supply (3-phas) *Whn you us singl phas, connct th main powr btwn L1 and L3 trminals. MCCB Nois filtr MC L L1 L2 L3 L1C L2C XA Main powr supply Control powr supply Extrnal rgnrativ rsistor Rd Whit Black P N B U V W XB Do not connct th short cabl Motor connction motor Grn or Grn/Yllow ALM X4 Insulatd DC12 to 24 V (±5 %) ALM+ ALM- Connction of rgnrativ rsistor Siz A B Shorting cabl (Accssoris) Not attachd Intrnal rgnrativ rsistor Not installd Connction of th connctor XB In cas of using th xtrnal In cas of not using th xtrnal rgnrativ rsistor rgnrativ rsistor Btwn P and B: Connct th xtrnal rgnrativ rsistor. Btwn P and B: Kp opn - Th circuit connctd to trminal X1 X7 ar scondary circuits. Insulation is ndd against th primary sid powr supply (powr supply of th motor brak). Plas do not connct thm with th sam powr supply.

38 No. SX-DSV / 200 V sizs C - D Built-in thrmostat of an xtrnal rgnrativ rsistor (light yllow) ON OFF MC1 ALM Coli surg supprssion units Powr supply (3-phas) *Whn you us singl phas, connct th main powr btwn L1 and L3 trminals. MCCB Nois filtr MC L L1 L2 L3 L1C L2C XA Main powr supply Control powr supply P N XC Short cabl In cas of using th xtrnal rgnrativ rsistor, disconnct th short cabl. Extrnal rgnrativ rsistor Rd Whit Black P RB B U V W XB Motor connction motor Grn or Grn/Yllow ALM X4 Insulatd DC12 to 24 V (±5 %) ALM+ ALM- Connction of rgnrativ rsistor Siz C D Shorting cabl (Accssoris) Supplid Intrnal rgnrativ rsistor Installd In cas of using th xtrnal rgnrativ rsistor Btwn RB and B: Disconnct th short cabl Btwn P and B: Connct th xtrnal rgnrativ rsistor Connction of th connctor XB In cas of not using th xtrnal rgnrativ rsistor Btwn RB and B: Connct th shorting cabl - Th circuit connctd to trminal X1 X7 ar scondary circuits. Insulation is ndd against th primary sid powr supply (powr supply of th motor brak). Plas do not connct thm with th sam powr supply.

39 No. SX-DSV V siz E Built-in thrmostat of an xtrnal rgnrativ rsistor (light yllow) ON OFF MC1 ALM Coli surg supprssion units Powr supply (3-phas) MCCB Nois filtr MC L L1 L2 L3 L1C L2C XA Main powr supply Control powr supply Short cabl In cas of using th xtrnal rgnrativ rsistor, disconnct th short cabl. Extrnal rgnrativ rsistor Rd Whit Black P RB B N U V W XC XB Motor connction motor Grn or Grn/Yllow ALM X4 Insulatd DC12 to 24 V (±5 %) ALM+ ALM- Connction of rgnrativ rsistor Siz Shorting cabl (Accssoris) Intrnal rgnrativ rsistor E Supplid Installd In cas of using th xtrnal rgnrativ rsistor Btwn RB and B: Disconnct th short cabl Btwn P and B: Connct th xtrnal rgnrativ rsistor Connction of th connctor XC In cas of not using th xtrnal rgnrativ rsistor Btwn RB and B: Connct th shorting cabl - Th circuit connctd to trminal X1 X7 ar scondary circuits. Insulation is ndd against th primary sid powr supply (powr supply of th motor brak). Plas do not connct thm with th sam powr supply.

40 No. SX-DSV V siz F Built-in thrmostat of an xtrnal rgnrativ rsistor (light yllow) ON OFF MC1 ALM Coli surg supprssion units Powr supply (3-phas) MCCB Nois filtr MC Short bar In cas of using th xtrnal rgnrativ rsistor, disconnct th short cabl. Extrnal rgnrativ rsistor L L1 L2 L3 L1C L2C P RB B N U V W Main powr supply Control powr supply Motor connction Motor Rd Whit Black Grn or Grn/Yllow ALM X4 Insulatd DC12 to 24 V (±5 %) ALM+ ALM- Connction of rgnrativ rsistor Siz Short bar (Accssoris) Intrnal rgnrativ rsistor F Supplid Installd In cas of using th xtrnal rgnrativ rsistor Btwn RB and B: Disconnct th short bar Btwn P and B: Connct th xtrnal rgnrativ rsistor Connction of th connctor XC In cas of not using th xtrnal rgnrativ rsistor Btwn RB and B: Connct th short bar - Th ability of th built-in dynamic brak rsistor allows up to thr continuous braking from th ratd spd with th maximal allowabl inrtia. Excding this condition can caus an unrcovrabl damag on th brak rsistr and a malfunction of th dynamic brak. - Th circuits connctd to trminal X1 X7 ar scondary circuits. Insulation is ndd against th primary sid powr supply (powr supply of th motor brak). Plas do not connct thm with th sam powr supply.

41 No. SX-DSV [1] Whn th srvo drivr uss singl phas powr supply for sizs A - D, connct th srvo drivr to th trminals L1, L3 of main powr supply input. Do not connct anything to th trminal L2. [2] Surly insrt th connctor into plac until it clicks. [3] Mak sur to us an insulation coatd crimp trminal whn conncting to ach trminal on th trminal block. [4] Trminal block covr is fixd with scrws. Whn wiring to th trminal block, unscrw ths scrws to uncovr th covr. Tightn th covr fixing scrw with th torqu of Nm. [5] Apply th powr supply of th voltag indicatd on th namplat. [6] Do not rvrs-connct th powr input trminals (L1, L2, and L3) and th motor output trminals (U, V, and W). [7] Do not connct th motor output trminals (U, V, and W) to ground or short out thm. [8] Bcaus high voltag is applid to th powr connctors XA, XB, XC and th trminal block, nvr touch thm on any account. It may caus lctric shock. [9] Suitabl for us on a circuit capabl of dlivring not mor than 5000 rms symmtrical amprs, blow th maximum input voltag of th product. [10] An AC srvomotor, unlik an induction motor, cannot chang th rotation dirction by xchanging thr phass. Mak sur to coincid th motor output trminals (U, V, and W) of th srvo drivr with th colors (pin numbr for cannon plugs) of th motor output cabls. [11] Surly connct th ground trminals of th motor and th srvo drivr and arth th ground trminal as wll as that of th nois filtr. In addition, arth th quipmnt unit. To arth thm, us th arth (ground rsistanc: 100 ohm or lss) for grounding. Plas tight th arth scrws by appropriat torqu and us corrct siz arth cabl dcidd in th spcifications. In ordr to avoid th impact of lctrolytic corrosion, do not immdiatly hav any contact btwn aluminum and coppr. [12] Attach th srg absorbing circuits for prvnting noiss to an lctromagntic contactor placd around th srvo drivr, a coil btwn rlay contact points, and a brak winding of motor with a brak. [13] Attach th no fus brakr. In cas of mrgncy, mak sur to powr off outsid th srvo drivr. To us an arth lakag circuit brakr, us that in which a high frquncy wav countrmasur is takn. [14] In ordr to rduc th trminal nois voltag, install a nois filtr. [15] Customr is rsponsibl for th powr supply of th brak attachd to a motor. [16] Turn ON th powr aftr th wiring was finishd.

42 No. SX-DSV [17] About th rgnrativ rsistor, - Th rgnrativ rsistor is not built into A, B. - Th rgnrativ rsistor is built into F fram. Th rgnrativ rsistor bcoms ffctiv whn th short-circuitd btwn th trminal RB and B. - Whn a trip occurs du to th rgnrativ load protction rror (rror No.18.0), xtrnally install a rgnrativ rsistor. To xtrnally install a rgnrativ rsistor, rmov a connction cabl or connction bar btwn trminals RB and B and thn connct th rgnrativ rsistor btwn trminals P and B. To us an xtrnal rgnrativ rsistor, st Pr0.16 (xtrnal rgnrativ rsistor slction) to 1 or 2. * As for xtrnal rgnrativ rsistor, w rcommnd th rsistors blow: Input powr voltag Siz Singl phas 100 V Singl phas200 V /3-phas 200V DV0P4281(100 W or lss) A DV0P4280 DV0P4283(200 W) B DV0P4283 DV0P4283 C DV0P4282 DV0P4283 D E F - DV0P4284 DV0P4284 x 2 in paralll or DV0P4285 x 1 DV0P4285 x 2 in paralll Manufacturr by Iwaki Musn Knkyusho Spcification Part numbr Ratd powr Manu Rsis (for rfrnc) (Not 1) Built-in thrmal protctor oprat -facturr's -tanc Fr air Fan usd ional tmpratur modl (1 m/s) [Ω] [W] [W] DV0P4280 RF70M ± 5 dg. Clsius DV0P4281 RF70M Contact point B DV0P4282 RF180B Opn/clos capacity (rsistanc load) DV0P4283 RF180B A 125 VAC, 6000 tims DV0P4284 RF A 250 VAC, tims DV0P4285 RH450F *Not 1) Elctric powr availabl without running th built-in thrmal protctor. *Not 2) For safty, ach rgnrativ rsistor has a built in tmpratur fus and a thrmal protctor. Configur th circuit so as to turn off th powr supply whn th thrmal protctor is running. ( Plas rfr to sction Wiring and systm configuration.) Th built-in tmpratur fus can brak according to th radiation condition, th usd tmpratur rang, th powr supply voltag, and th load chang. Mak sur that th surfac tmpratur of rgnrativ rsistor is bing kpt 100 dg. Clsius or lss undr bad conditions (high powr supply voltag, larg load inrtia, short dclration tim, tc.) subjct to rgnration by mbdding th rgnrativ rsistor in quipmnts and running th quipmnts. Attach th rgnrativ rsistor on th incombustibls such as mtal. Install th rgnrativ rsistor so that popl can not dirctly touch it, such as th incombustibl to covr it. Kp th tmpratur of placs, which popl can dirctly touch, blow 70 dg. Clsius.

43 No. SX-DSV Mthod for connction to powr connctor Us th following procdur for connction to connctors XA, XB, XC and XD. <Mthod for connction> 1. Strip off th insulation of th wir. (a) XA, XB, XC (b) XD 10 mm (Siz A-D) 13 mm (Siz E) 8 mm 2.Insrt a wir into th connctor. [1] Prss th lvr attachd abov th uppr slot with a fingr to push down th spring. [2] Whil prssing down th lvr, insrt a wir into th insrtion opning (round hol) until it stops. *Not that all parts of wir ar insrtd. [3] Rlas th lvr to connct th wir. *Pull th wir lightly to chck th connction. <Prcautions> Strip off corrct lngth of insulation of a wir. Whn conncting a wir to th connctor, b sur to disconnct th connctor from th srvo drivr in advanc. Insrt only 1 wir into a wir insrtion opning. Wir can b rlasd by prssing down th lvr.

44 No. SX-DSV Wiring to connctor X4 [1] Customr is rsponsibl for th control signal powr supply at VDC for xtrnal control connctd btwn COM+ and COM-.Insulation is ndd against th primary sid powr supply (powr supply of th motor brak). Plas do not connct thm with th sam powr supply. [2] Plac th srvo drivr and its priphral dvic as narly as possibl (up to 3 m) so as to shortn th wiring. [3] Wir th wiring as far away as possibl (30 cm or mor) from th powr lins (L1, L2, L3, L1C, L2C, U, V, W, ). Do not put thm in th sam duct or bind thm togthr. Digital input X4 I-COM 6 4.7k SI1 5 1k 4.7k SI2 7 1k 4.7k SI3 8 1k 4.7k SI4 9 1k 4.7k SI5 10 1k 4.7k DC 12~24 V SI6 11 1k 4.7k SI7 12 1k 4.7k SI8 13 1k Srvo drivr Th functions of th pins SI1-SI8 ar assignd by paramtrs. For th factory dfault stting, rfr to Appndix I/O connctor (X4) factory dfault stting.

45 No. SX-DSV Digital Output [1] B awar of th polarity of th powr supply for control signals. Th polarity connction contrary to th figur shown abov can damag th srvo drivr. [2] To dirctly driv th rlay with ach output signal, mak sur to attach a diod in paralll to th rlay and in th dirction as shown in th figur blow. Th srvo drivr can b damagd if th diod is not attachd or th diod is attachd in th rvrs dirction. [3] Whn a logic circuit such as a gat rcivs ach output signal, tak car so that a nois dos not impact on th circuit. [4] Apply 50 ma or lss of currnt to ach output. [5] Sinc th connction of transistor for th output is Darlington connction, th VCE(SAT) btwn th collctor and mittr will b approximatly 1V whn th transistor is ON. Thrfor th rgular TTL IC dos not fulfill th VIL, so plas b awar that dirct connction cannot b don. Th functions of th pins S01-S03 ar assignd by paramtrs. For factory dfault sttings, rfr to Appndix I/O connctor (X4) factory dfault stting.

46 No. SX-DSV Fdback puls of rotary ncodr RS422 lin rcivr AM26C32 or quivalnt OA+ OA OA- X Lin drivr AM26C31or quivalnt A OB OB+ OB B Scaling circuit GND 16 FG Srvo drivr sid [1] To rciv th output puls, us RS422 lin rcivr (AM26C32 or quivalnt), with an appropriat trmination rsistor (approx. 330 Ω) connctd across its inputs. [2] Us th pulss at lss than or qual to th maximum output frquncy 4 Mpps (aftr quad dg valuation).

47 No. SX-DSV Wiring to connctor X6 [1] As for th ncodr cabl, us th batch shildd twistd wir pairs whos cor is 0.18 mm 2 or mor. [2] Th cabl lngth should b up to 20 m. Whn th wiring is long, w rcommnd you to us th doubl wiring for th 5 V powr supply in ordr to rduc th impact of voltag drop. [3] Shildd cabl of th ncodr cabl is connctd to th FG trminal at th motor nd, b sur to connct to th shll (FG) of X6 in th srvo drivr sid. [4] Wir th wiring as far away as possibl (30 cm or mor) from th powr lins (L1, L2, L3, L1C, L2C, U, V, W, ). Do not put thm in th sam duct or bind thm togthr. Not using th multi-turn data *Usd as an incrmntal ncodr *Usd as on rvolution absolut ncodr Lad wir typ MSMF 50 W W MHMF 50 W W MQMF 100 W W Twistd pair Whit Black Rd Pink Cyan Purpl Yllow/Grn E5V E0V BAT+ BAT- PS PS FG X6 +5 V E5V 0 V E0V BTP-O BTN-O PS PS Shll(FG) Rgulator Motor Tyco Elctronics Tyco Elctronics Motor Encodr cabl Srvo drivr

48 No. SX-DSV Connctor Typ MSMF 50 W W MHMF 50 W W MQMF 100 W W Twistd pair E5V E0V BAT X6 E5V E0V BTP-O +5 V 0 V Rgulator BAT- 2 4 BTN-O JN6CR07PM2 JAE PS PS FG JN6FR07SM1 JAE 5 6 PS PS Shll(FG) Motor Encodr cabl Srvo drivr MSMF 1.0 kw kw MHMF 1.0 kw kw MDMF 1.0 kw kw MGMF 0.85 kw kw Twistd pair E5V E0V BAT X6 E5V E0V BTP-O +5 V 0 V Rgulator BAT- 5 4 BTN-O JN2AS10ML3-R JAE PS PS FG JN2DS10SL1-R JAE 5 6 PS PS Shll(FG) Motor Encodr cabl Srvo drivr

49 No. SX-DSV Cannon plug typ MSMF 1.0 kw kw MHMF 1.0 kw kw MDMF 1.0 kw kw MGMF 0.85 kw kw Twistd pair E5V E0V BAT+ H G T X6 E5V E0V BTP-O +5 V 0 V Rgulator BAT- S 4 BTN-O JL10-2E20-29P JAE PS PS FG K L J JL10-6A20-29S JAE 5 6 PS PS Shll(FG) Motor Encodr cabl Srvo drivr

50 No. SX-DSV Using th multi-turn data *Cas of build absolut systm Lad wir typ MSMF 50 W W MHMF 50 W W MQMF 100 W W Twistd pair Whit Black Rd Pink Cyan Purpl Yllow/Grn E5V E0V BAT+ BAT- PS PS FG Battry X6 +5 V E5V 0 V E0V BTP-O BTN-O PS PS Shll(FG) Rgulator Motor Tyco Elctronics Tyco Elctronics Motor Encodr cabl Srvo drivr Connctor Typ MSMF 50 W W MHMF 50 W W MQMF 100 W W Twistd pair E5V E0V BAT Battry X6 E5V E0V BTP-O +5 V 0 V Rgulator BAT- 2 4 BTN-O JN6CR07PM2 JAE PS PS FG JN6FR07SM1 JAE 5 6 PS PS Shll(FG) Motor Encodr cabl Srvo drivr

51 No. SX-DSV MSMF 1.0 kw kw MHMF 1.0 kw kw MDMF 1.0 kw kw MGMF 0.85 kw kw Twistd pair E5V E0V BAT Battry X6 E5V E0V BTP-O +5 V 0 V Rgulator BAT- 5 4 BTN-O JN2AS10ML3-R JAE PS PS FG JN2DS10SL1-R JAE 5 6 PS PS Shll(FG) Motor Encodr cabl Srvo drivr Cannon plug typ MSMF 1.0 kw kw MHMF 1.0 kw kw MDMF 1.0 kw kw MGMF 0.85 kw kw Twistd pair E5V E0V BAT+ H G T Battry X6 E5V E0V BTP-O +5 V 0 V Rgulator BAT- S 4 BTN-O JL10-2E20-29P JAE PS PS FG K L J JL10-6A20-29S N/M A JAE 5 6 PS PS Shll(FG) Motor Encodr cabl Srvo drivr

52 No. SX-DSV Absolut ncodr battry connction Connct th absolut ncodr battry dirctly to th BAT+ and BAT- connctors of th ncodr at th motor. Or, it is also possibl to connct th battry to th 14 and 15 pins of th X4, and thn connct through th pins 3 and 4 of th X6. X6 BAT+ BAT- 3 4 BTP-O BTN-O X4 BTP-I BTN-I Battry FG Shll(FG) Motor Encodr cabl Srvo drivr Not: If th battry is dirctly connctd to th ncodr connctors at th motor, do not connct any wir to th pins 3 and 4 of th X6.

53 No. SX-DSV Prcautions in using a battry for absolut ncodr An rror ariss from th absolut ncodr whn a battry voltag drop occurs. Th voltag drop occurs du to th lif span of a battry or voltag dlay. (1) Th lif span of a battry may bcom short dpnding on ambint nvironmnt. (2) Lithium battris hav a transint minimum voltag ffct (voltag dlay phnomnon), in which a voltag drop may occur tmporarily whn discharg starts. For this rason, th battris should b rfrshd whn usd. <Whn a battry is usd for th first tim> Bfor using our optional battry unit DV0P2990 (Built-in battry: Manufacturd by TOSHIBA LIFESTYLE, ER6V-3.6 V), connct th connctor with lad wirs to th battry as shown in th right figur and lav it for about 5 minuts. And thn disconnct th connctor from th CN601, and install it to th srvo drivr. If using anothr battry, w rcommnd that you also rfrsh th battry. For rfrshing a battry, consult with th manufacturr of th battry. <Aftr installing battry> CN601 W rcommnd that control powr b turnd on/off onc a day. If usd incorrctly, battris may caus troubls such as corrosion du to lakag and hazards such as xplosion. So, obsrv th following ruls: [1] Insrt a battry corrctly without confusing + and - trminals. [2] If a battry usd for a long tim or no longr usd is lft insid quipmnt, a troubl such as lakag may occur. Rplac such a battry as soon as possibl. (As a standard, w rcommnd rplacing battris vry 2 yars.) Th battry lctrolyt is highly corrosiv. It not only corrods surrounding parts, but it also causs hazards such as a short-circuit du to its conductivity. Rplac battris priodically. [3] Do not disassmbl battris or throw thm into fir. Do not disassmbl th battry bcaus it is vry dangrous if a splash of th contnts coms into an y. Also, do not throw th battry into fir or hat it bcaus it may burst, causing hazards. [4] Do not short-circuit th battry or rmov its tub. If th battry + and - trminals ar connctd togthr with a conductiv matrial such as a mtal, a larg currnt flows, not only wakning th battry, but also gnrating xcssiv hat, rsulting in a burst to caus hazards. [5] Nvr attmpt to charg th battry bcaus it is not rchargabl. Disposal of old battris aftr rplacmnt may b rstrictd by local govrnmnts. Dispos of battris following such a rstriction. Air transportation Application for approval of hazardous matrial air transportation is rquird (for both passngr and cargo airplans). (UN packing is rquird.) Whn you ask for air transportation, you ar rqustd to submit ncssary documnts (paramtr shts and SDS tc.). In this cas, mak a rqust to us through a dalr you purchasd from. UN packing Consult with your transport company.

54 No. SX-DSV Wiring to connctor X2A, X2B [1] Us shildd twistd pair (STP) compatibl with catgory 5 of SIA/EIA-568 or highr spcifications. [2] If both nds of th shild ar not groundd, EMC prformanc will dgrad. Whn installing connctor plug on both nds of shildd cabl, positivly connct th shild to th mtallic plug shll. [3] For colors of wir and matching connctor pins, rfr to TIA/E1A568B (s figur blow). Pins 3 and 6 ar for signal wir. Connct wir to 3 pin pairs on th connctor: 1 2, 4 5 and 7 8. [4] Whn using 2-pair wir in plac of 4-pair wir, us pins 1 2 and 3 6 and lav pins 4 5 and 7 8 on connctor unconnctd. [5] Lngth of communication cabl Btwn 2 nods: max. 100 m Both rquirmnts should b mt. If th rquirmnt b abov cannot b mt, consult with us. [6] Bcaus spcifications such as flxural charactristic, tmpratur rang and insulation matrial diffr from manufacturr to manufacturr, slct th cabl bst suitabl for your application. Slct th cabl for movabl application according to your oprating condition. Connction to X2A / X2B MAX: 100 m Connctor RJ45 plug RJ45 plug RJ45 connctor X2A 1 Whit/Orang 1 TX/RX+ X2B TX/RX+ 2 Orang TX/RX- 2 TX/RX- 3 Whit/Grn 3 RX/TX+ RX/TX+ 4 Blu Whit/Blu Grn 6 RX/TX- RX/TX- 7 Whit/Brown Brown Shild on connctor Shild on connctor Srvo drivr Shildd twistd pair cabl of 5 or highr catgory Highr-lvl dvic or srvo drivr in th subsqunt circuit Pin placmnt of th RJ45 plug 1 8

55 No. SX-DSV Dynamic brak Srvo drivr(siz A-F) has built-in dynamic brak function to stop motor in an mrgncy. Dynamic brak can b opratd in th following cass 1. Th main powr off 2. Th srvo off 3. Protction action 4. Connctor X4 driving ban importation (POT, NOT) action On th abov 1-4 cass, valid or invalid of dynamic brak can b dtrmind by th paramtrs. Howvr, whn th control powr off, dynamic brak of siz A-F kp valid condition. Dynamic brak is what is intndd for us in a short tim as only mrgncy 1. Do not start / stop th motor by th srvo signal (SRV-ON). Built-in dynamic brak circuit may b damagd. 2. Do not driv th motor with xtrnal torqu. Motor gnrats lctricity by xtrnal torqu. Dynamic brak circuit will b damagd and it is possibl that short-circuit currnt caus smok or combustion. 3. Allow approx. 10 minuts paus whn th dynamic brak is activatd during high-spd running. Rsistor is damagd and th dynamic brak might not work whn using it undr mor critical oprating condition. 8-5 Mounting dirction and spacing -To prform ffctiv cooling, allow sufficint ambint spac. -Provid a fan so as to mak uniform th tmpratur in th control panl. -Each of Sizs D to F is quippd with a cooling fan on th bottom. -Adhr to nvironmntal conditions for th nvironmnt in th control panl. -Srvo drivr is fixd to th groundd conductiv fram -In cas th portion to rciv srvo drivr coatd, pling off th coating bfor installing srvo drivr hombuilt brackts with conductiv plating provids ffctiv anti-nois masurs. -Cas of mak mounting brackt, plas conductiv plating procss th surfac of th brackt. - Plas masur th ambint tmpratur at 50 mm distanc from th sid or bottom of amplfir. If it is impossibl, masur th ambint tmpratur at 50 mm distanc from th top of amplfir. 40mm or mor Control panl Fan Fan 100mm or mor d d d 40mm or mor Sizs A-F d 10 mm or mor Dirction of air flowing from th intrnal cooling fan (Sizs D F) 100mm or mor

56 No. SX-DSV Complianc with global standards 9-1 Conforming standards Europan EC dirctiv UL standard CSA standard KC EMC dirctiv Low voltag dirctiv IEC : Intrnational Elctrotchnical Commission EN : Europaischn Norman EMC : Elctromagntic Compatibility UL : Undr writrs Laboratoris CSA : Canadian Standards Association KC : Radio Wavs Act(South Kora) Standard numbr EN55011 EN EN EN EN EN50178 UL508C (Fil No.E164620) C22.2 No.14 KN11 KN ,3,4,5,6,8, Europan EC dirctiv Our products, in ordr to mak it asy for th mbddd quipmnts and dvics to b compliant with EC dirctiv, provid th complianc with th standards associatd with low voltag dirctiv Complianc with EMC dirctiv Our srvo systm dtrmins th modl (conditions) such as th installd distanc and th wiring of th srvo drivr and th srvomotor and maks th modl compliant with th standards associatd with EMC dirctiv. Whn quipmnts and dvics ar mbddd in practic, wiring and grounding conditions, tc. may b not th sam as th modl. Thus, it is ncssary to masur how th final quipmnts and dvics whr th srvo drivr and th srvo motor ar mbddd ar compliant (spcially unncssary radiation nois, nois trminal voltag) with EMC dirctiv.

57 No. SX-DSV Priphral dvic configuration Installation nvironmnt Us th srvo drivr undr th nvironmnt of pollution lvl 2 or 1 dfind in IEC (Exampl: Installd in th IP54 control panl.) Th circuit brakr (MCCB) or fus (crtifid to IEC standards and UL) must b connctd to th main powr supply. Us th DC 24 V powr supply with doubl or rinforcd insulation for paralll I/O. 100 V/200 V typ Mtallic control box Powr supply Rsidual Currnt dvic (RCD) Circuit brakr Surg absorbr Frrit cor <Ddicatd to powr supply cabl> Nois filtr NF1 XA L1 L2 L3 L1C L2C Drivr U V W Frrit cor <Ddicatd to motor cabl> XB X6 X3 NF2 Motor M RE X4 Insulatd powr supply for intrfac Controllr Safty Controllr Ground (PE) Th numbr of Frrit cor Using Symbol position Scop NF1 (100 V) C Powr (200 V) C,D supply (100 V) A,B cabl (200 V) A,B,E NF2 (100 V) A,B,C Motor (200 V) A,B,C,D,E cabl Part No. DV0P1460 Manufactur s Part No. ZCAT Quantity (200 V) F 2 *Th numbr of winding turns on th frrit cor for ach modl is

58 No. SX-DSV Powr supply 100 V systm: Singl phas 100 V V 200 V systm (Sizs A-D): Singl / 3 phas 200 V V 200 V systm (Sizs E-F): 3 phas 200 V V +10 % -15% +10 % -15% +10 % -15% 50/60 Hz 50/60 Hz 50/60 Hz [1] Us it undr th nvironmnt of ovrvoltag catgory III dfind in IEC [2] As for th paralll I/O powr supply, us th CE marking conforming product or th VDC powr supply of insulation typ compliant with EN standard (EN60950) Circuit brakr Mak sur to connct a circuit brakr compliant with IEC standard and UL crtification (markd with LISTED, U L ) btwn th powr supply and th nois filtr. Intgral solid stat short circuit protction dos not provid branch circuit protction. Branch circuit protction must b providd in accordanc with th National Elctrical Cod and any additional local cods Nois filtr To install on nois filtr as a whol in th powr unit whn multipl srvo drivrs ar usd, consult th nois filtr manufacturr Surg absorbr Install th surg absorbr in th primary sid of th nois filtr. - Plas! To carry out a prssur tst of quipmnts and dvics, mak sur to dtach th surg absorbr. Othrwis, th surg absorbr can b damagd Frrit cor Install th nois filtrs for signal lin in powr supply and motor cabl Grounding [1] In ordr to avoid an lctric shock, mak sur to connct a protction ground trminal ( ) of th srvo drivr and th protction ground (PE) of th control panl. [2] Do not tightn th connction to th protction ground trminal ( ) along with othr parts. Th srvo drivr has two protction ground trminals.

59 No. SX-DSV List of priphral dvics applicabl to srvo drivr Srvo drivr Voltag spc Powr capacity (Ratd currnt) Elctromagnti c contactor (Ratd currnt/ Rlasd hat currnt) Circuit brakr (Ratd curr nt) Nois filtr Surg absorbr Frrit cor Powr cabl Motor cabl MADL 01 MADL 11 Singl phas 100 V Approx. 0.4 kva MADL 05 MADL 15 MBDL 21 MBDL 25 MCDL 31 MCDL 35 Singl/ 3 phas 200 V Singl phas 100 V Singl/ 3 phas 200 V Singl phas 100 V Singl/ 3 phas 200 V Approx. 0.5 kva Approx. 0.5 kva Approx. 0.9 kva Approx. 0.9 kva Approx. 1.3 kva 20 A 10 A DV0P4170 (for singl phas) / DV0PM20042 DV0P4190 (for singl phas) / DV0P1450 (for 3 phas) 15 A DV0PM20042 DV0P1460 DV0P1460 MDDL 45 MDDL 55 Singl/ 3 phas 200 V Approx. 1.8 kva Approx. 2.3 kva 30 A 20 A DV0P4220 MEDL 83 MEDL 93 Approx. 3.8 kva Approx. 4.5 kva 60 A 30 A DV0PM20043 MFDL A3 MFDL B3 3phas 200 V Approx. 4.5 kva Approx. 7.5 kva 100 A 50 A DV0P3410 DV0P1450 *Slct th spcification common to singl/ 3 phas 200 V according to th powr supply.

60 No. SX-DSV Rmarks Slct a circuit brakr and a nois filtr with th capacity comparabl to th powr capacity (by taking into account th load condition). Trminal block and arth trminal For wiring, us th coppr conductor cabl of th tmpratur rating 75dg. Clsius or mor. For th protction arth trminal, us M4 for Sizs A-E, M5 for Sizs F. Th trminal block can b damagd if th scrw tightning torqu xcds th maximum. (S th pag for xplanation of trminal blocks.) Us arth cabl having a cross sction ara of 2.0 mm 2 (AWG 14) or mor for an output of 50 W to 2.5 kw, 3.5 mm 2 (AWG 12) or mor for an output of 3.0 kw to 5.0 kw, 13.3 mm 2 (AWG 6) or mor for an output of 6.0 kw to 11.0 kw, or 21.1 mm 2 (AWG 4) or mor for an output of 15 kw. For Sizs A - E, us th ddicatd connctor which cam with th product. In this cas, th strippd cabl lngth should b 8-9 mm. Th tightning torqu of connctor (X4) with th uppr controllr should b Nm. Th torqu which xcds 0.35 Nm can damag th drivr's connctor. Optional part numbr Part numbr of manufacturr Manufacturr Absorbr DV0P1450 DV0P4190 R A V-781BXZ-4 R A V-781BWZ-4 Okaya Elctric Industris Frrit cor DV0P1460 ZCAT TDK DV0P4170 SUP-EK5-ER-6 Nois filtr DV0P4220 DV0P3410 3SUP-HU30-ER-6 3SUP-HL50-ER-6B Okaya Elctric Industris DV0PM SUP-HU10-ER-6 DV0PM SUP-HU50-ER-6

General Information. Ordering. Popular Downloads. Dimensions. Technical

General Information. Ordering. Popular Downloads. Dimensions. Technical AFS16Z-30-22-30 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AFS16Z-30-22-30 Product ID: 1SBL176082R3022 EAN: 3471523158399

More information

REFERENCE SPECIFICATIONS

REFERENCE SPECIFICATIONS No. SX-DSV03089 REFERENCE SPECIFICATIONS MODEL Product Name: AC servo driver Model Number: MINAS A6N Series Issued on 1 Feb. 2016 Motor Business Unit, Smart Factory Solutions Business Division Automotive

More information

Power Distribution Board SVS201-PWR (ControlPlex )

Power Distribution Board SVS201-PWR (ControlPlex ) Powr Distribution Board SVS20PWR (ControlPlx ) Dscription Togthr with th bus controllr CPC10 and th lctronic circuit protctor ESX50D-S1xx th powr distribution board typ SVS20PWR-xx forms th intllignt powr

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF16-30-10-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF16-30-10-13 Product ID: 1SBL177001R1310 EAN: 3471523110632 Catalog

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF30-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF30-30-00-13 Product ID: 1SBL277001R1300 EAN: 3471523111233 Catalog

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF52-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF52-30-00-13 Product ID: 1SBL367001R1300 EAN: 3471523132337 Catalog

More information

A V 50Hz / V 60Hz

A V 50Hz / V 60Hz A12-30-10 415-440V 50Hz / 440-460V 60Hz Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: A12-30-10 415-440V 50Hz / 440-460V 60Hz

More information

TF General Information. Ordering. Dimensions. Popular Downloads. Technical

TF General Information. Ordering. Dimensions. Popular Downloads. Technical TF65-47 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF65-47 Product ID: 1SAZ811201R1004 EAN: 4013614482946 Catalog Dscription:

More information

Factory Modifications

Factory Modifications Slction Ordring Information modifications will consist of Simns standard componnts as availabl. Standard quipmnt dimnsions and nclosur construction may not apply whn crtain modifications and spcial faturs

More information

TF General Information. Ordering. Dimensions. Popular Downloads. Technical

TF General Information. Ordering. Dimensions. Popular Downloads. Technical TF42-7.6 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF42-7.6 Product ID: 1SAZ721201R1040 EAN: 4013614398117 Catalog Dscription:

More information

REFERENCE SPECIFICATIONS

REFERENCE SPECIFICATIONS No. SX-DSV02201 REFERENCE SPECIFICATIONS MODEL Product Name : AC servo driver Part Number : MINAS-A5N, A5N01 Series Issued on May. 31 th, 2011 Revised on Feb. 15 th, 2013 Motor Business Unit, Appliances

More information

Speed Controller with One-touch Fittings

Speed Controller with One-touch Fittings 4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. mounting DIN

More information

Speed Controller with One-touch Fittings

Speed Controller with One-touch Fittings In-lin Typ 4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. Controlld

More information

Selection of pressure gauges The bowl is covered with a transparent bowl guard! Square embedded type pressure gauge.

Selection of pressure gauges The bowl is covered with a transparent bowl guard! Square embedded type pressure gauge. Modular F.R.L. Units ttr visibility & nvironmntal rsistanc Doubl layr dsign RoHS Slction of prssur gaugs Th bowl is covrd with a transparnt bowl guard! Intrchangability Intrchangabl with th prvious R sris

More information

FRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS

FRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS FRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS QCI5001 Rv 0 Pag 1 Crtifid 06/21/2016 MAINTENANCE: Two primary matrials ar usd to manufactur your nw bath nclosur: tmprd glass and anodizd aluminum. To assur

More information

CAUTION: Do not install damaged parts!!!

CAUTION: Do not install damaged parts!!! Your satisfaction is important to us, plas lt us hlp! If you hav any qustions or concrns during th installation, our support rprsntativs ar availabl to assist you. Plas call: 1-877-769-3765 or Liv Chat

More information

Leadership in Filtration. ENTARON XD/MD 40 High performance for high air flows

Leadership in Filtration. ENTARON XD/MD 40 High performance for high air flows Ladrship in Filtration XD/MD 40 High prformanc for high air flows 2 XD/MD 40 For nominal flow rats up to 40 m 3 /min XD 40 MD 40 MD 40 WITH DUALSPIN XT Applications Extrmly dusty applications Mobil applications,

More information

BKF Off-line filter / cooler unit

BKF Off-line filter / cooler unit BKF Off-lin filtr / coolr unit Compact dsign Filling function optional (BKF 18/3) Easy installation Low- nois pump DIN filtr lmnts Efficint plat hat xchangr DE 38 1/14 Pag 1/6 Bühlr Tchnologis GmbH D -

More information

Air Combination Air Filter + Regulator + Lubricator. AC20-A to AC40-A. How to Order. Description. Rc NPT 1/8 1/4 3/8 1/2 3/4

Air Combination Air Filter + Regulator + Lubricator. AC20-A to AC40-A. How to Order. Description. Rc NPT 1/8 1/4 3/8 1/2 3/4 ourtsy of /lodyn/ydradyn otion ontrol ydraulic Pnumatic Elctrical chanical (8) 26-8 www.cmafh.com I ymbol w r t y L ot ) Option ttachmnt mi-standard 3 Thrad typ a b c d f g h 2 Port siz ir ombination ir

More information

8. INSTALLATION/WIRE CONNECT GUIDE

8. INSTALLATION/WIRE CONNECT GUIDE 8. INSTALLATION/WIRE CONNECT GUIDE Bfor Starting 1. This st is xclusivly for us in cars with a ngativ groun, 12 V powr supply. 2. Ra ths instructions carfully. 3. B sur to isconnct th attry - trminal for

More information

REFERENCE SPECIFICATIONS

REFERENCE SPECIFICATIONS No. SX-DSV02471 REFERENCE SPECIFICATIONS MODEL Product Name : AC servo driver Part Number : MINAS-A5B, A5B01 Series Issued on Oct. 24, 2013 Revised on Mar. 13, 2014 Motor Business Division, Appliances

More information

Switches and Indicators 14

Switches and Indicators 14 Switchs and Indicators 14 14 Switchs and Indicators Indx Sris 14 Dscription Pag 331 Product Assmbly Pag 332 Product Rang - pushbuttons for standard mounting - pushbuttons for flush mounting - accssoris

More information

Sliding clamp, compact single acting with spring return

Sliding clamp, compact single acting with spring return Sliding clamp, compact singl acting with spring rturn adaptr Clamping block Prss bd Hydraulic clamping block Optimun adaptation in narrow construction spacs Applications: th compact sliding clamp is a

More information

PIglide AT3 Linear Stage with Air Bearings

PIglide AT3 Linear Stage with Air Bearings PIglid AT3 Linar Stag with Air Barings High Prformanc Nanopositioning Stag A-123 Idal for scanning applications or highprcision positioning Clanroom compatibl Siz of th motion platform 210 mm 210 mm Travl

More information

REFERENCE SPECIFICATIONS

REFERENCE SPECIFICATIONS No.SX-DSV03015 REFERENCE SPECIFICATIONS MODEL Product Name: AC servo driver Part Number : MINAS-A6 series (Basic type) Issued on Spt. 1, 2015 Revised on Nov. 1, 2015 Motor Business Unit, Smart Factory

More information

Series AW. Modular Type Filter Regulators AC AF AR AL A G AV AW10 AW20 AW30 AW40 AW40-06 AW60 AW20K AW30K AW40K AW40K-06 AW60K AWM20 AWM30 AWM40 AWD20

Series AW. Modular Type Filter Regulators AC AF AR AL A G AV AW10 AW20 AW30 AW40 AW40-06 AW60 AW20K AW30K AW40K AW40K-06 AW60K AWM20 AWM30 AWM40 AWD20 Modular Typ Filtr gulators ris W Filtr gulator ris W W M5 x.8 Options W2 /8, /4 W3 /4, 3/8 W4 /4, 3/8, /2 W4-6 Pags 366 through to 377 W6, Filtr gulator ith ackflo Function ris WK W2K /8, /4 W3K /4, 3/8

More information

PIMag High-Load Linear Stage

PIMag High-Load Linear Stage PIMag High-Load Linar Stag High Prformanc and Cost Efficincy, Linar Motor V-412 Width 116 mm Travl rang to 610 mm Nominal forc 33 N Incrmntal or absolut linar ncodr Prcision rcirculating ball barings,

More information

Port A. Slew rate gate drive logic level shift GND. Fig. 1 - Typical Application Circuit

Port A. Slew rate gate drive logic level shift GND. Fig. 1 - Typical Application Circuit 6.5 m, Bidirctional Battry Switch in Compact WCSP DESCRIPTION Th bidirctional switch fatur rvrs blocking capability to isolat th battry from th systm. Th intrnal switch has an ultra low 6.5 m (typ. at

More information

System 6 Quickfit-Expando Connectors

System 6 Quickfit-Expando Connectors Connctors Systm Faturs A fac boring connctor family for 32mm systm drilling with full rang of panl and application variants for all cabint manufacturing applications Minimum drilling rquirmnts Linar cam

More information

Konsole Typ Traglast/Paar kg

Konsole Typ Traglast/Paar kg Carrying consols for asy an fficint i chang on th prss Konsol Typ 1835- Konsol Typ 1835- Colour: RAL 1004, goln yllow Carrying consol, hanging Th carrying consols ar hung in th hooks on th i changing si

More information

Centred disc butterfly valves with AMRING elastomer liner. PS 16 bar: DN 40 to 200. PS 10 bar: DN 250 to 1000

Centred disc butterfly valves with AMRING elastomer liner. PS 16 bar: DN 40 to 200. PS 10 bar: DN 250 to 1000 Typ sris booklt 8409.14/3-10 OX - Cntrd disc buttrfly valvs with MRING lastomr linr PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 to 1000 Dsign in accordanc with EN 593 and ISO 10631 pplications Gnral circuits:

More information

ROTARY TILLER "N" SERIES

ROTARY TILLER N SERIES ROTARY TILLER "N" SERIES Opration, Srvic & Parts Manual Octobr 2006 FORM: NTillrBook/NTillrBook_08-17 No part of this manual shall b rproducd, copid or dissminatd by any mans, without manufacturr prior

More information

Precision Linear Stage

Precision Linear Stage Prcision Linar Stag Compact Dsign, for Loads to 10 kg L-509 Travl rangs from 26 to 102 mm (1'' to 4") Rpatability to 0.1 µm Optional with Dirct-Masuring Linar Encodr ActivDriv DC,DC, BLDC, and DC gar motors

More information

MBF Series. Xe nâng Pallet chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50. Frame and body

MBF Series. Xe nâng Pallet chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50. Frame and body MBF Sris X nâng Pallt chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50 Top quality dosn't nd to com at a high pric. Our low-cost hand pallt - trucks giv you vrything you nd to do th job - plus a

More information

How to Order. Description. Without backflow function With backflow function. Metric thread (M5) Rc NPT G M5 1/8 1/4 3/8 1/2 3/4

How to Order. Description. Without backflow function With backflow function. Metric thread (M5) Rc NPT G M5 1/8 1/4 3/8 1/2 3/4 Filtr gulator W to W6 Filtr gulator ith ackflo Function W2K to W6K Exampl) Whn th air supply is cut off and rlasing th inlt prssur to th atmosphr, th rsidual prssur rlas of th outlt sid can b nsurd for

More information

EN Structural Bolts

EN Structural Bolts EN 14399-3 Structural Bolts SUPPLIED BY ALLTHREAD INDUSTRIES PTY LTD AND FIRST FORGE AUSTRALIA PTY LTD Pty Ltd 1 Tabl of Contnts Introduction to Allthrad Industris and First Forg Australia Introduction

More information

Precision Rotation Stage

Precision Rotation Stage Prcision Rotation Stag High Travl Accuracy L-611 Unlimitd travl rang Vry high rsolution Maximum vlocity 200 /s Optional angl masuring systm for dirct position masurmnt DC, BLDC, and stppr motors Dirction-snsing

More information

Needle Felted Camping Tutorial

Needle Felted Camping Tutorial Ndl Fltd Camping Tutorial Th ndl fltd Camping World tutorial show you stp by stp, how to ndl fltd owl, tr stump, fishing rod and fish, a blazing campfir, a fox, a tr and a tnt. Ths figurins will provid

More information

PREMIER PUMP & SUPPLY

PREMIER PUMP & SUPPLY WRK16MB1A0 SCMPC100LLCGM WRK16MB2A0 SCMPC200LLCGM VOLTAG 115V 115V 225.24 156.03 225.24 156.03 PC UNITS AR DIRCT PIN FOR PIN RPLACMNT MANUFACTURD BY SYMCOM ORDR BY COMPONNT NUMBR - - - - - 16MXXXX 4TH

More information

High-Precision Linear Stage

High-Precision Linear Stage High-Prcision Linar Stag High Travl Accuracy L-511 Travl rangs to 155 mm (6") Rpatability to 0.1 µm DC, BLDC, and DC gar motors Stppr motors Optional linar ncodr for dirct position masurmnt Dirction-snsing

More information

Province of Alberta FORESTS ACT SCALING REGULATION. Alberta Regulation 195/2002. With amendments up to and including Alberta Regulation 99/2012

Province of Alberta FORESTS ACT SCALING REGULATION. Alberta Regulation 195/2002. With amendments up to and including Alberta Regulation 99/2012 Provinc of Albrta FORESTS ACT SCALING REGULATION Albrta Rgulation 195/2002 With amndmnts up to and including Albrta Rgulation 99/2012 Offic Consolidation Publishd by Albrta Qun s Printr Albrta Qun s Printr

More information

ELEC th Tutorial Additional Slides

ELEC th Tutorial Additional Slides ELEC 344 7 th Tutorial Additional Slids Midtrm Rsult & Induction Machin Novmbr 18, 2016 Wonba Choi Th Univrsity of British Columbia 1. Structur of Induction Machin 2. Working principl of induction motors

More information

FEATURES APPLICATIONS. Port B. Slew Rate Gate Drive Logic LevelShift. SiP32101, SiP32102 GND. Fig. 1 - Typical Application Circuit

FEATURES APPLICATIONS. Port B. Slew Rate Gate Drive Logic LevelShift. SiP32101, SiP32102 GND. Fig. 1 - Typical Application Circuit 6.5 mω, Bi-Dirctional Battry Switch in Compact WCSP DESCRIPTION Th SiP321, SiP322, and SiP323 bidirctional switchs fatur rvrs blocking capability to isolat th battry from th systm. Th intrnal switch has

More information

TECO Induction Motors up to 600kW Installation and Maintenance Instructions

TECO Induction Motors up to 600kW Installation and Maintenance Instructions TECO Induction Motors up to 600kW Installation and Maintnanc Instructions Bfor Installation & Us Warnings 1. Ensur namplat data corrsponds with your rquirmnts 2. Ensur th motor is undamagd 3. Rmov any

More information

AVANTAGE. Smoke evacuation shutter. V13-H 12/2015

AVANTAGE. Smoke evacuation shutter.  V13-H 12/2015 Organism Crtificatur AFNOR Crtification - www.marqu-nf.com AVANTAGE Smok vacuation shuttr. n Clapts coup-fu t Volts d désnfumag D.A.S. Rf-Tchnologis nv Lang Ambachtstraat 40 9860 Oostrzl Blgium Tl +32

More information

Centred disc butterfly valves with AMRING elastomer liner. DN 32 to 600 Allowable pressure PS 20 bar Design in accordance with EN 593 and ISO 10631

Centred disc butterfly valves with AMRING elastomer liner. DN 32 to 600 Allowable pressure PS 20 bar Design in accordance with EN 593 and ISO 10631 Typ sris booklt 8446.1/6-10 ISORIA 20 Cntrd disc buttrfly valvs with AMRING lastomr linr DN 32 to 600 Allowabl prssur PS 20 bar Dsign in accordanc with EN 593 and ISO 10631 Applications Flow shut--off

More information

Pre-Load Bolt Assemblies BS EN HRC Assemblies BAPP

Pre-Load Bolt Assemblies BS EN HRC Assemblies BAPP Pr-Loa Bolt Assmblis Pr-Loa Bolt Assmblis k BS EN 14399-10 HRC Hxagon Bolt Dimnsions b(rf.) c a s w k kw r s pb c max. min. max. max. min. max. min. min. nom. max. min. min. min. max. min. M12 1.75 30

More information

K Series. 360 screening for full EMC shielding high packing density for space savings rugged housing for extreme working conditions.

K Series. 360 screening for full EMC shielding high packing density for space savings rugged housing for extreme working conditions. K K sris connctors hav bn spcifically dsignd for outdoor applications. Thy includ an innr slv and two sals to prvnt pntration of solids or liquids into th housing formd by th plug, fr sockt, fixd sockt

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available poxy terminal seal compatible with bottom-wash cleaning Typical Applications Test & measurement equipment

More information

ESCC Qualified SMPS Capacitors

ESCC Qualified SMPS Capacitors SCC Qualifid SMPS Capacitors High Voltag Chip/add Capacitors HIGH VOTAG CHIP CAPACITORS Capacitors, ixd, Chip, Cramic Dilctric, Typ II, High Voltag, Basd on Styls 82 and 825 for us in SCC spac programs,

More information

SPIRAL STAIR INSTALLATION GUIDE. Salter -Wood Tread Covers -Continuous Sleeve -Aluminum Handrail -Primed or Powdercoated

SPIRAL STAIR INSTALLATION GUIDE. Salter -Wood Tread Covers -Continuous Sleeve -Aluminum Handrail -Primed or Powdercoated 29 SPIRAL STAIR INSTALLATION GUI Salter -Wood Tread Covers -Continuous Sleeve -Aluminum Handrail -Primed or Powdercoated PARTS 1 2 3 BASPLAT BOTTOM BALUSTR MAIN BALUSTR 4 5 6 CNTR BALUSTR CNTR COLUMN TRA

More information

Boeing 377 Stratocruiser Check-lists For A2A Simulations Boeing 377 Stratocruiser Boeing 377 Stratocruiser Check-lists

Boeing 377 Stratocruiser Check-lists For A2A Simulations Boeing 377 Stratocruiser  Boeing 377 Stratocruiser Check-lists Boeing 377 Stratocruiser Check-lists 1 NTRING TH COCKPIT BATTRY P MASTR P AVIONICS P NGIN SLCTOR GNRATORS VOLTMTR BUS APU FUL VALVS FUL BOOSTR PUMPS ANTI-IC SWITCHS CARBURTOR HAT INTRCOOLR FLAPS CLOSD

More information

15. Package Information for Cyclone II Devices

15. Package Information for Cyclone II Devices 15. Packag Information for Cyclon II vics CII51015-2.3 Introduction This chaptr provids packag information for Altra Cyclon II dvics, including: vic and packag cross rfrnc Thrmal rsistanc valus Packag

More information

REFERENCE SPECIFICATIONS

REFERENCE SPECIFICATIONS No.SX-DSV03025 REFERENCE SPECIFICATIONS MODEL Product Name: AC servo driver Part Number : MINAS-A6 series (Multifunction type) Issued on Spt. 1, 2015 Revised on Nov. 11, 2015 Motor Business Unit, Smart

More information

16. Package Information for Stratix II & Stratix II GX Devices

16. Package Information for Stratix II & Stratix II GX Devices 16. Packag Information for Stratix II & Stratix II GX vics SII52010-4.3 Introduction This chaptr provids packag information for Altra Stratix II and Stratix II GX dvics, including: vic and packag cross

More information

Paper F9. Financial Management. March/June 2018 Sample Questions. Fundamentals Level Skills Module. The Association of Chartered Certified Accountants

Paper F9. Financial Management. March/June 2018 Sample Questions. Fundamentals Level Skills Module. The Association of Chartered Certified Accountants Fundamntals Lvl Skills Modul Financial Managmnt March/Jun 218 Sampl Qustions F9 ACCA Tim allowd: 3 hours 15 minuts This qustion papr is dividd into thr sctions: Sction A ALL 15 qustions ar compulsory and

More information

o one can argue the fact that Volkswagen made all the right moves when it came to the inception of the Gen-IV Golf. German engineers put tremendous

o one can argue the fact that Volkswagen made all the right moves when it came to the inception of the Gen-IV Golf. German engineers put tremendous N o on can argu th fact that Volkswagn mad all th right movs whn it cam to th incption of th Gn-IV Golf. Grman nginrs put trmndous thought into th s!yiing of th alrady-infamous hatchback with spcial mphasis

More information

typ. (1) Load (2) 4:1 Input Single or Dual Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming

typ. (1) Load (2) 4:1 Input Single or Dual Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming Faturs Rgulatd Convrtrs 4:1 wid put voltag rang Compact siz 1 x1 packag Efficinc up to 9% Wid opratg tmpratur from -4 C to +7 C without dratg Contuous short circuit protction Dscription Slction Guid Pt

More information

Spray Control Systems CLASSIC METAL SPRAY CONTROL SOLUTIONS ENGINEERED FOR OPTIMAL PERFORMANCE AND STYLE

Spray Control Systems CLASSIC METAL SPRAY CONTROL SOLUTIONS ENGINEERED FOR OPTIMAL PERFORMANCE AND STYLE Spray Control Systms CLASSIC METAL SPRAY CONTROL SOLUTIONS ENGINEERED FOR OPTIMAL PERFORMANCE AND STYLE Timlss Spray Control Systms Prformanc and Styling with Timlss Appal. Unqustionably, th top prioritis

More information

Steam-converting Valve Type DUP. and spray water valve

Steam-converting Valve Type DUP. and spray water valve Stam-convrting Valv Typ DUP and spray watr valv Application Stam-convrting valv for powr stations and industrial plants combind with a spray watr valv in on unit Inlt: DN 40 a NPS 1½ a 20 PN 16 a 630 Class

More information

Section 2. PROGEF Natural PP Piping System. Serviced by GF Tustin

Section 2. PROGEF Natural PP Piping System. Serviced by GF Tustin Sction 2 PROGEF Natural PP Piping Systm Srvic by GF Tustin Tabl of Contnts PROGEF Natural (PP) Spcifications 2.4 Fittings Pip 2.5 90 Elbow 2.6 45 Elbow 2.7 T 2.8 Analytical Snsor T 2.9 Rucr 2.10 Union

More information

AMENDMENT No. 5 dated 21/9/2017

AMENDMENT No. 5 dated 21/9/2017 MINISTRY OF HEALTH & FAMILY WELFARE National AIDS Control Organization (NACO) Govrnmnt of India Through Stratgic Allianc Managmnt Srvics Pvt. Ltd. (SAMS) B01-B03, Vardhman Diamond Plaza, Community Cntr,

More information

MX MXA ALUMINIUM MOBILE ENCLOSURE APPLICATON EXAMPLE. DESKTOP AUDIO PREAMPLIFIER with USB WIRELESS MICROPHONE SYSTEM MODEL RAILROAD CONTROLLER

MX MXA ALUMINIUM MOBILE ENCLOSURE APPLICATON EXAMPLE. DESKTOP AUDIO PREAMPLIFIER with USB WIRELESS MICROPHONE SYSTEM MODEL RAILROAD CONTROLLER MX MX Th MX mobil nlosur is dsignd with a bautiful and lgant finish in mind. ith its taprd panl dgs and roundd dsign, it fits omfortably in your hand, whil giving off a simpl yt slk look. Suitabl for us

More information

EK-X Technical Data vertical order pickers EK-X

EK-X Technical Data vertical order pickers EK-X @ Tchnical Data vrtical ordr pickrs vrtical ordr pickr This spcification sht to VDI guidlin 2198 only givs th tchnical figurs for slctd quipmnt variants. Othr Elctric-ngin Prformanc data Dimnsions Tyrs/chassis

More information

C&K S Series Slide Switches

C&K S Series Slide Switches Switches Features/Benefits 6 to 15 S nclosed housing PC and Snap-in panel mounting Reversing option Models Available Typical Applications Portable tools Small appliances Floor care products Build-A-Switch

More information

Financial Management (FM)

Financial Management (FM) Applid Skills Financial Managmnt (FM) Sptmbr/Dcmbr 218 Sampl Qustions FM ACCA FM Tim allowd: 3 hours 15 minuts This qustion papr is dividd into thr sctions: Sction A ALL 15 qustions ar compulsory and MUST

More information

product catalogueq2 14 High Precision Performance Connection 1140BAR PSI installed in minutes no welding metal-to-metal sealed

product catalogueq2 14 High Precision Performance Connection 1140BAR PSI installed in minutes no welding metal-to-metal sealed installd in minuts no wlding mtal-to-mtal sald 16 500PSI CERTIFIED 1140BAR Now approvd and crtifid for 1140bar, 16 500 PSI. 100% no wldd parts. crtifid Swiss original High Prcision Prformanc Connction

More information

13. Package Information for Stratix Devices

13. Package Information for Stratix Devices 13. Packag Information for Stratix vics S53008-3.0 Introduction This data sht provids packag information for Altra dvics. It includs ths sctions: Sction Pag vic & Packag Cross Rfrnc.....................

More information

Date of issue Version No. 2 Page No. 1 of: 5

Date of issue Version No. 2 Page No. 1 of: 5 Nam and Addrss: Laboratory Nam Main offic Addrss Phon Fax E-Mail Shkl Scals Ltd. Kibbutz Bit Ksht, 1524700, Isral +972-4-662-9118 +972-4-676-5775 ronn@shklonlin.com Dat of issu 29.09.2016 Vrsion No. 2

More information

SITE NAME: PROJECT SITE I.D.#: PROJECT #: LOCATION #: SITE ADDRESS: DENVER (56.9 MI) EXIT 153 I-25 COLORADO SPRINGS NOT TO SCALE DIRECTIONS

SITE NAME: PROJECT SITE I.D.#: PROJECT #: LOCATION #: SITE ADDRESS: DENVER (56.9 MI) EXIT 153 I-25 COLORADO SPRINGS NOT TO SCALE DIRECTIONS PNTRATIONS : PROJCT #: PROJCT #: ANTNNAS LOCATION #: SIT ADDRSS: DNVR (56.9 MI) IT 153 INTRQUST PKWY (1.9 MI) CO-21 S (11.9 MI) DRAWING IND I-25 COLORADO SPRINGS GALLY RD. (0.7 MI) SHT DSCRIPTION T1.00

More information

Centred disc butterfly valves with AMRING elastomer liner. PS 16 bar : DN 40 to 200. PS 10 bar : DN 250 to 1000

Centred disc butterfly valves with AMRING elastomer liner. PS 16 bar : DN 40 to 200. PS 10 bar : DN 250 to 1000 Typ sris booklt 8409.11/12-10 Cntrd disc buttrfly valvs with MRING lastomr linr PS 16 bar : DN 40 to 200 OX - OX - Gaz OX - Mat E OX - Mat P PS 10 bar : DN 250 to 1000 Dsign in accordanc with EN 593 and

More information

Principles of design CLT

Principles of design CLT Principls of dsign CLT EN 1995-1-1:2004 + AC:2006 + A1:2008 / Principls of dsign CLT 1 Editorial This brochur is dsignd to provid an ovrviw of situations frquntly ncountrd in fixing plywood / cross-aminat

More information

2004 LEGACY SERVICE MANUAL QUICK REFERENCE INDEX

2004 LEGACY SERVICE MANUAL QUICK REFERENCE INDEX 2004 LGACY SRVIC MANUAL QUICK RFRNC INDX CHASSIS SCTION FRONT SUSPNSION FS RAR SUSPNSION RS WHL AND TIR SYSTM WT This service manual has been prepared to provide SUBARU service personnel with the necessary

More information

AVX European Space Agency and CECC Ceramic Capacitor Products

AVX European Space Agency and CECC Ceramic Capacitor Products Cramic Capacitor Products Europan Spac www.avx.com Vrsion.4 Tabl of Contnts AVAIABE TYPES................................................ 2 AVAIABE REIABIITY EVES / TYPES............................ 2

More information

GVR FUSELESS DIODE RECTIFIER

GVR FUSELESS DIODE RECTIFIER Kinetics System Number: OPRATION AND MAINTNANC MANUAL Kinetics Industries GVR FUSLSS DIOD RCTIFIR And RGA - RGNRATION ABSORPTION CONTROLS GVR MODL: GVR005M-00CUL GVR010M-005CUL GVR015M-005CUL GVR00M-005CUL

More information

SPIRAL STAIR INSTALLATION GUIDE

SPIRAL STAIR INSTALLATION GUIDE SPIRAL STAIR INSTALLATION UI Salter -Continuous Sleeve -Aluminum Handrail -alvanized 14 Illustrations are general and may not match your specific stair design. PARTS 1 2 3 BASPLAT BOTTOM BALUSTR MAIN BALUSTR

More information

Evaporative Air Conditioning Product Range. bonaire.com.au. Office Locations BONAIRE A CLIMATE TECHNOLOGIES BRAND ABN

Evaporative Air Conditioning Product Range. bonaire.com.au. Office Locations BONAIRE A CLIMATE TECHNOLOGIES BRAND ABN Evaporativ Air Conditioning Product Rang Offic Locations Dubbo Rogrs Industris 6 Richard Ryan Plac, Dubbo NSW 2830 02 6882 2733 Albury 592 Dallingr Rd, Lavington 02 6882 2733 Prth offic 32 Waltrs Way Forrstfild

More information

European Technical Approval ETA-08/0184

European Technical Approval ETA-08/0184 Europan Tchnical Approval ETA-08/0184 - Original vrsion in Grman languag andlsbzichnung Trad nam -alknschuh 08 Zulassungsinhabr oldr of approval Zulassungsggnstand und Vrwndungszwck Gnric typ and us of

More information

G5-series AC Servo Drives with Built-in EtherCAT Communications

G5-series AC Servo Drives with Built-in EtherCAT Communications s with Built-in R88D-KN@-ECT Contents Ordering Information Specifications General Specifications Characteristics Servo Drives with Single-phase 100 VAC Input Power Servo Drives with Single-phase or Three-phase

More information

Hydraulic cylinders type CH - square heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

Hydraulic cylinders type CH - square heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar) www.atos.com Tabl 0-9/ Hydraulic cylindrs typ - squar hads with countrflangs to ISO 600- - nominal prssur 6 MPa (60 bar) - max 5 MPa (50 bar) SWC Cylindrs Dsignr Softwar for assistd slction of tos cylindrs

More information

Research on Braking Stability of Electro-mechanical Hybrid Braking System in Electric Vehicles

Research on Braking Stability of Electro-mechanical Hybrid Braking System in Electric Vehicles Pag000217 EVS25 Shnzhn, China, Nov 5-9, 2010 Rsarch on Braking Stability of Elctro-mchanical Hybri Braking Systm in Elctric Vhicls nzhu Ji 1, Mi Tian 2 School of transportation scinc an nginring, Bihang

More information

Section 4. SYGEF Plus HP PVDF Piping System. Serviced by GF Tustin

Section 4. SYGEF Plus HP PVDF Piping System. Serviced by GF Tustin Sction 4 SYGEF Plus HP PVDF Piping Systm Srvic by GF Tustin Tabl of Contnts SYGEF Plus HP PVDF Spcifications 4.4 Fittings Pip 4.5 90 Elbow 4.6 45 Elbow 4.7 T 4.7 Mol Rucing T 4.8 Fabricat Rucing T 4.9

More information

Transport anchor system. Lifting Socket. Flat Lifting Socket. Short Anchor

Transport anchor system. Lifting Socket. Flat Lifting Socket. Short Anchor Transport anchor systm W provi a complt Transport anchor systm, from various Transport Anchors, lifting vics to plastic accssoris as wll as Tchnical support. Casting in th anchors into th concrt with avanc

More information

VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)

VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) VHICL DYNAMICS CONTROL (VDC) (DIAGNOSTICS) . Basic Diagnostic Procedure A: PROCDUR Basic Diagnostic Procedure CAUTION: Remove foreign matter (dust, water, oil etc.) from the VDCCM&H/U connector during

More information

Paper F9. Financial Management. September/December 2017 Sample Questions. Fundamentals Level Skills Module

Paper F9. Financial Management. September/December 2017 Sample Questions. Fundamentals Level Skills Module Fundamntals Lvl Skills Modul Financial Managmnt Sptmbr/Dcmbr 217 Sampl Qustions Tim allowd: 3 hours 15 minuts This qustion papr is dividd into thr sctions: Sction A ALL 15 qustions ar compulsory and MUST

More information

Hydraulic cylinders type CK - square heads with tie rods to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

Hydraulic cylinders type CK - square heads with tie rods to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar) www.atos.com Tabl 7-/ Hydraulic cylindrs typ CK - squar hads with ti rods to ISO 600- - nominal prssur 6 MPa (60 bar) - max MPa (0 bar) SWC Cylindrs Dsignr Softwar for assistd slction of tos cylindrs &

More information

KSM MOUNTED UNITS CATALOGUE

KSM MOUNTED UNITS CATALOGUE MOUNTED UNITS CATALOGUE Tchnical Information Fatur Pags for rfr 8~23 8 2 Lubrication 8~9 3 Tolrancs for Mountd Units 9~4 4 Radial Intrnal Claranc of Barings 5 Slction of Baring Siz 6~2 6 Slction of s

More information

/ /rip P 1 42LT EL: important MANUAL Do Not Throw Away LAWN TRACTOR Rev. 1 o8.19.o_ AP Printed in the U.S.A. WARNING:

/ /rip P 1 42LT EL: important MANUAL Do Not Throw Away LAWN TRACTOR Rev. 1 o8.19.o_ AP Printed in the U.S.A. WARNING: important MANUAL Do Not Throw Away / /rip 03076 OPERATOR'S MANUAL EL: P 1 42LT LAWN TRACTOR WARNING: Rad this Manual and follow all Warnings and Safty instructions. Failur to do so can rsult in srious

More information

INSTRUCTION MANUAL NASHVILLE KNOX CHIFFOROBE. Model No: UPC CODE: NOTE: Lot number: Date of purchase: BR (Rustic Gray)

INSTRUCTION MANUAL NASHVILLE KNOX CHIFFOROBE.   Model No: UPC CODE: NOTE: Lot number: Date of purchase: BR (Rustic Gray) INSTRUCTION MANUAL Model No: R1519-4 (Rustic Gray) NASHVILL KNOX CHIFFORO UPC COD: 0-65857-17291-1 NOT: THIS INSTRUCTION OOKLT CONTAINS IMPORTANT SAFTY INFORMATION. PLAS RAD AND KP FOR FUTUR RFRNC. Lot

More information

2307/08.02 RIVKLE. Fasteners for sheet metal and plastic, offering a simple solution even for single-sided installation.

2307/08.02 RIVKLE. Fasteners for sheet metal and plastic, offering a simple solution even for single-sided installation. 23008.02 RIVK Fastnrs for sht mtal an plastic, offring a simpl solution vn for singl-si installation. RIVK lin rivt nuts an stus, our prouct portfolio Stl Stainlss stl Aluminium Sizs Flat ha Countrsunk

More information

RIVNUT. Blind Rivet Nuts and Studs

RIVNUT. Blind Rivet Nuts and Studs 230UK0.03 lin Rivt Nuts an Stus Fastnrs for sht mtal an plastic, offring a simpl solution for mounting strong thras vn for singl-si installation. www.bollhoff.comuk lin rivt nuts an stus, our prouct portfolio

More information

LS4, LS4_K, LS4_H series

LS4, LS4_K, LS4_H series faturs LS, LS_K, LS_H Typ according to IEC 6196-1 and IEC 6196-2 Compact housing (28 x 0 mm) and no dad zon on cap sid Rsolution 1 mm for fingr protction, 20, 0, 0 mm for hand protction, 50, 90 mm for

More information

Three Phase Flat Motors Three Phase Saw Arbor Motors. for sawing, milling, routing of wood, plastics and metal. type of protection IP 54

Three Phase Flat Motors Three Phase Saw Arbor Motors. for sawing, milling, routing of wood, plastics and metal. type of protection IP 54 Thr Phs Flt Motors Thr Phs Sw Arbor Motors for swing, milling, routing of wood, plstics nd mtl of protction IP 54 Thr phs flt motors with br of protction IP 54 Thr phs flt motors of protction IP 55 (possibl

More information

Zone 1 Zone 2 Zone 3 Old Rate Everyone Adult

Zone 1 Zone 2 Zone 3 Old Rate Everyone Adult Why Bring Back Concssions? Lack of concssions as wll as th club s corrct nam not bing usd ar th two major factors for supportr dissatisfaction It will hlp to stop protsts and bring back lost supportrs

More information

Electric Motors. Electric Motors

Electric Motors. Electric Motors Basic Specifications and -2 Three Phase TFC General Purpose Motors -3 to -5 Single Phase TFC General Purpose Motors -6 SyMax Permanent Magnet AC Motors -6 Totally nclosed Brakemotors -7 PowerWash XT Washdown

More information

Single-Hung Windows Builders Aluminum

Single-Hung Windows Builders Aluminum TABL OF CONTNTS Specifications... 1-2 QuickSpecGuide... 1-3 levations: Scale Single-Hung... 1-4 Single-Hung-FloridaSizes... 1-8 Grille Patterns... 1-9 SectionDetails: 6 Scale... 1-10 InstallationWallDetails...

More information

Single-Hung Side Load Windows Builders Vinyl

Single-Hung Side Load Windows Builders Vinyl TABL OF CONTNTS Specifications... 3-2 QuickSpecGuide... 3-3 levations: 1/4 Scale Single-HungSideLoad... 3-4 2-WideSingle-HungSideLoad... 3-14 3-WideSingle-HungSideLoadwithCenterPicturewith24 Flanker...

More information

CH4. Alarms & Remote Start. Automotive Data Solutions Inc.

CH4. Alarms & Remote Start. Automotive Data Solutions Inc. Alarms & Remote Start Automotive Data Solutions Inc. CH INSTALL UID OL-AL(MDB)-CH-N Available for : OL-MDB-ALL Rev. Date: October 8, 0 Doc. No.: ##9## U.S. Patent No. 8,8,780 The brand names and logos

More information

SPIRAL STAIR INSTALLATION GUIDE

SPIRAL STAIR INSTALLATION GUIDE SPIRAL STAIR INSTALLATION UI cono Stair -Vinyl Handrail -alvanized Illustrations are general and may not match your specific stair design. PARTS 1 4 BASPLAT MAIN BALUSTR CNTR BALUSTR 5 6 7 CNTR COLUMN

More information

Innovations in Canada The Future of Construction

Innovations in Canada The Future of Construction World Economic Forum Global Trnds with E&C Innovations in Canada Th Futur of Construction Prsntation by: Pirr Bouchr CCI Prsidnt Octobr 26 th, 2016 World Economic Forum Global Trnds with E&C What is CCI?

More information