Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Small and Medium Three-phase Asynchronous Motors
|
|
- Cori Ferguson
- 6 years ago
- Views:
Transcription
1 ICS F 01 NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA 中华人民共和国国家标准 GB Replace GB Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Small and Medium Three-phase Asynchronous Motors 中小型三相异步电动机能效限定值及能效等级 How to BUY & immediately GET a full-copy of this standard? Search --> Add to Cart --> Checkout (3-steps); 3. No action is required - Full-copy of this standard will be automatically & immediately delivered to your address in 0~60 minutes. 4. Support: Sales@ChineseStandard.net. Wayne, Sales manager Issued on: May 11, 2012 Implemented on: September 1, 2012 Jointly Issued by: the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; and the Standardization Administration of the People s Republic of China 1
2 Contents Foreword... 3 Introduction Scope Normative and Quoted References Terms and Definitions Technical Requirements Test Method
3 Foreword Clause 4.3 of this Standard is mandatory and others are recommendatory. This standard is drafted according to the rules specified in GB/T This standard replaces GB "Minimum Allowable Values of Energy Efficiency and the Energy Efficiency Grades for Small and Medium Three-phase Asynchronous Motors" and has the key changes as follows: The range of rated power was changed from 0.55kW~315kW in the original standard to 0.75kW~375kW; All-level energy efficiency indexes of motors were improved correspondingly; The test method is to measure according to Method B analysis method for measurement of input-output power loss in GB/T 1032; The efficiency requirements of motors under 75% rated output power were cancelled; The requirements of power factor in of the original standard were cancelled; The requirements of energy efficiency grade marking in Chapter 6 of the original standard were cancelled. This Standard was referred to IEC "Efficiency Classes of Single-speed, Three-phase, Cage-induction Motors". This standard is proposed by the Resource Conservation and Environmental Protection Division of National Development and Reform Commission. This standard is under the jurisdiction of the National Technical Committee on Energy Fundamentals and Management of Standardization Administration of China (SAC/TC20). Drafting organizations of this standard: China National Institute of Standardization, Shanghai Electrical Apparatus Research Institute (Group Co., Ltd.), Nanyang Explosion Protection Group Co., Ltd, Nanyang Explosion Protected Electrical Apparatus Research Institute, International Copper Association (China), Beijing 3
4 B.J.Elecrtic Motor Co.,Ltd., Wuxi Huada Motors Co.,Ltd., Hebei Electric Motor Co., Ltd., ABB Shanghai Motors Co., Ltd., Yunnan Copper Science & Technology Develop Corporation Limited and China National Quality Supervisory and Test Centers for Small and Medium Electrical Machines. Chief drafting staffs of this standard: Zhao Yuejin, Li Xiuying, Yang Shengcheng, Wu guohua, Zhou Shoulian, Zhao Kai, Yang Cheng, Yang Xu, Li Meilan, Ni Lixin, Xu Li, Zhang Xin, Wang Gen. The previous editions of standard replaced by this standard are: GB ; GB
5 Introduction This revision of GB has referred to the international standard "Efficiency Classes of Single-speed, Three-phase, Cage-induction Motors" (IEC ), to enable the motor efficiency level of China meets the requirements of the international standard; the rated power and number of poles of motors specified in GB are kept consistent with those specified in IEC ; the efficiency values of Grade 3, Grade 2 and Grade 1 energy efficiency specified in GB are kept consistent with IE2, IE3 and the recommended table in Appendix A of IEC respectively. 5
6 NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA 中华人民共和国国家标准 GB Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Small and Medium Three-phase Asynchronous Motors 中小型三相异步电动机能效限定值及能效等级 1 Scope This standard specifies the limited values of energy efficiency grade; allowable values of energy efficiency; target allowable values of energy efficiency; evaluating values of energy conservation; and test methods for small and medium three-phase asynchronous motors (hereinafter referred to as: motors). This standard is applicable to general-purpose motors or general-purpose explosion-proof motors of single-speed enclosed self fan cooled; N design; and continuous duty system with a voltage below 1000V; powered by a 50 Hz three-phase AC supply; the rated power is within a range of 0.55kW~315kW; and the number of poles is 2, 4 and 6. 2 Normative and Quoted References The following referenced documents are indispensable for the application of this document. For dated references, only the dated versions apply to this standard. For undated references, the latest edition of the normative document (including all the 6
7 amendments) is applicable to this standard. GB Rotating Electrical Machines--Rating and Performance (IEC :2004, IDT) GB/T 1032 Test Procedure for Three-phase Induction Motors 3 Terms and Definitions The following terms and definitions are applicable to this document. 3.1 minimum allowable values of energy efficiency for motors Under the testing conditions specified in this Standard, the minimum standard value allowed for efficiency of motor. 3.2 target minimum allowable values of energy efficiency for motors After this Standard has been implemented for certain years (Translator s Note: see clause 4.4 for the exact number of years), the minimum standard value allowed for efficiency of motor. 3.3 evaluating values of energy conservation for motors The minimum standard value of motor efficiency which meets the requirements of energy conservation certification, under the testing conditions specified by this Standard 4 Technical Requirements 4.1 Basic requirements The general performance, safety performance, explosion-proof performance as well as noise and vibration requirements of motors shall meet the relevant standards respectively. 7
8 ==================================== Some pages are intentionally removed. Translated by:
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA
Translated English of Chinese Standard: GB4094.2-2017 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T 08
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T18386-2017 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T
More informationMT/T Translated English of Chinese Standard: MT/T COAL INDUSTRY STANDARD
Translated English of Chinese Standard: MT/T249-1997 www.chinesestandard.net Sales@ChineseStandard.net COAL INDUSTRY STANDARD MT OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.160.30 K 25 MT/T 249-1997 Flameproof
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T34014-2017 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.040 T 47 GB/T 34014-2017 Coding regulation
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T 20234.2-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.040.99 T 35 GB/T 20234.2-2015 Replacing
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB9744-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.10 G 41 GB/T 9744-2015 Replacing
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB Translated English of Chinese Standard: GB
Translated English of Chinese Standard: GB23255-2009 www.chinesestandard.net Sales@ChineseStandard.net ICS 43.040.20 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T38 Photometric characteristics
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T12939-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.99 G 41 GB/T 12939-2015 Replacing
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA
ICS 43.020 T 04 GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T 12540-2009 Replacing GB/ T12540-1990 Minimum Turning Circle Diameter, Minimum Turning Clearance Circle Diameter and Out Value
More informationGB/T / IEC :2007
Translated English of Chinese Standard: GB/T16935.1-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.120 K 30 GB/T 16935.1-2008 / IEC
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB9743-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.10 G 41 GB/T 9743-2015 Replacing
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. QCT Translated English of Chinese Standard: QC/T
Translated English of Chinese Standard: QC/T791-2007 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL AUTOMOTIVE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA QC ICS 43.140 T 80 QC/T 791-2007
More informationElectric Vehicles Engineering Approval Evaluation Program 电动汽车定型试验规程
Translated English of Chinese Standard: GB/T18388-2005 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 43.080.01 T 47 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC
More informationNational Standard of the People s Republic of China
Translated English of Chinese Standard: GB/T18287-2013 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 29.220.01 K 82 National Standard of the People s Republic
More informationCycle life requirements and test methods for traction battery of electric vehicle
Translated English of Chinese Standard: GB/T 31484-2015 www.chinesestandard.net Sales@ChineseStandard.net ICS 43.120 T 47 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB GB/T 31484-2015 Cycle life
More informationMT/T Translated English of Chinese Standard: MT/T COAL INDUSTRY STANDARD OF
Translated English of Chinese Standard: MT/T478-2011 www.chinesestandard.net Sales@ChineseStandard.net MT COAL INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.160.30;29.260.20 K 25 Registration
More informationGB/T NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA. The reliability test methods of drive motor system for electric vehicles
Translated English of Chinese Standard: GB/T29307-2012 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 43.040 T 21 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF
Translated English of Chinese Standard: GB/T3917.3-2009 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.30 W 04 GB/T 3917.3-2009 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T19751-2005 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.080.01 T 47 GB/T 19751-2005 Hybrid
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T25978-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T 04 GB/T 25978-2010 Road vehicles
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. QC/T Translated English of Chinese Standard: QC/T
Translated English of Chinese Standard: QC/T340-2017 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net AUTOMOBILE INDUSTRY STANDARD QC OF THE PEOPLE S REPUBLIC OF CHINA ICS
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T31255-2014 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 13.110 J 09 GB/T 31255-2014 Safety of
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T28542-2012 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE GB PEOPLE S REPUBLIC OF CHINA ICS 43.040.10 T 37 GB/T 28542-2012 Road Vehicles
More informationNB/T Translated English of Chinese Standard: NB/T ENERGY INDUSTRY STANDARD
Translated English of Chinese Standard: NB/T 33001-2010 www.chinesestandard.net Sales@ChineseStandard.net ICS 29.200 K 81 NB ENERGY INDUSTRY STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA NB/T 33001-2010 Specification
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T4501-2016 www.chinesestandard.net Sales@ChineseStandard.net GB ICS 83.160.10 G 41 GB/T 4501-2016 Replacing GB/T 4501-2008 Laboratory Test Methods for Truck and
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T1171-2006 www.chinesestandard.net Sales@ChineseStandard.net GB ICS 21.220.10 G 42 National Standard of the People s Republic of China GB/T 1171-2006 Replacing
More informationSeries of Motorcycle Tyres
GB/T 2983-28 Translated English of Chinese Standard: GB/T2983-28 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 83.16.1 G 41 NATIONAL STANDARD OF THE PEOPLE
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T
Translated English of Chinese Standard: www.chinesestandard.net Sales@ChineseStandard.net ICS 43.040.99 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T 35 Replacing GB/T 20234.1-2011 Connection
More informationGB / ISO :2011
Translated English of Chinese Standard: GB10827.1-2014 www.chinesestandard.net Sales@ChineseStandard.net ICS 53.060 J 83 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB / ISO 3691-1:2011 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T2977-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.10 G 41 GB/T 2977-2008 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T Translated by:
Translated English of Chinese Standard: GB/T4502-2009 Translated by: www.chinesestandard.net Email: Sales@ChineseStandard.net ICS 83.160.10 National Standard of the People s Republic of China GB G 41 GB/T
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T14951-2007 www.chinesestandard.net Sales@ChineseStandard.net ICS 43.020 R 06 National Standard of the People s Republic of China GB Replacing GB/T 14951-1994,
More informationNATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中华人民共和国国家标准. Lubricating oils for turbines 涡轮机油
ICS 75.100 E 34 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中华人民共和国国家标准 GB 11120-2011 Replacing GB 11120-1989 Lubricating oils for turbines 涡轮机油 [ISO 8068: 2006, Lubricants9industrial oils and
More informationNational Standard of the People s Republic of China
ICS 43.040.99 T 35 National Standard of the People s Republic of China GB/T 20234.2-2011 Connection set for conductive charging of electric vehicles Part 2: AC charging coupler 电动汽车传导充电用连接装置第 2 部分 : 交流充电接口
More informationGB / IEC :2005
Translated English of Chinese Standard: GB5226.1-2008 GB National Standard ICS 29.020 J 09 of the People s Republic of China GB 5226.1-2008 / IEC 60204-1:2005 Replacing GB 5226.1-2002 Electrical safety
More informationNational Environmental Protection Standard of the People s Republic of China 中华人民共和国国家环境保护标准
National Environmental Protection Standard of the People s Republic of China 中华人民共和国国家环境保护标准 HJ 438 2008 Durability of Emission Control Systems of Compression Ignition and Gas Fuelled Positive Ignition
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB29743-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 03.220.20 R 16 GB 29743-2013 Motor Vehicle
More informationQC/T Translated English of Chinese Standard: QC/T AUTOMOBILE INDUSTRY STANDARD
Translated English of Chinese Standard: QC/T707-2004 www.chinesestandard.net Sales@ChineseStandard.net AUTOMOBILE INDUSTRY STANDARD QC OF THE PEOPLE S REPUBLIC OF CHINA QC/T 707-2004 Technical specification
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB Translated English of Chinese Standard: GB
Translated English of Chinese Standard: www.chinesestandard.net Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T 04 Replacing GB/T 1589-2004 Limits of dimensions,
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB15085-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.040.60 T 26 GB 15085-2013 Replacing
More informationNB/T Translated English of Chinese Standard: NB/T Energy Industry Standard
Translated English of Chinese Standard: NB/T33002-2010 www.chinesestandard.net Sales@ChineseStandard.net ICS 29.200 NB K 81 Energy Industry Standard of the People s Republic of China NB/T 33002-2010 Specification
More informationQC/T Translated English of Chinese Standard: QC/T AUTOMOTIVE INDUSTRY STANDARD
QC/T 198- Translated English of Chinese Standard: QC/T198- www.chinesestandard.net Sales@ChineseStandard.net QC ICS 43.040.10 AUTOMOTIVE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA T 36 QC/T 198-
More informationGB/T Translated English of Chinese Standard: GB
Translated English of Chinese Standard: GB25389.1-2010 www.chinesestandard.net Sales@ChineseStandard.net GB ICS 27.180 E 11 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T 25389.1-2010 Wind turbine
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T18487.2-2017 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 33.100
More informationNational Standard. of the People s Republic of China
Translated English of Chinese Standard: GB4793.1-2007 www.chinesestandard.net Sales@ChineseStandard.net ICS 19.080; 71.040.10 L 09 National Standard GB of the People s Republic of China GB 4793.1-2007
More informationQB/T Translated English of Chinese Standard: QB/T
Translated English of Chinese Standard: QB/T2858-2007 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL LIGHT INDUSTRY STANDARD QB OF THE PEOPLE S REPUBLIC OF CHINA ICS 97 180 Y 50 Reference No.
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
More informationNational Standard of People s Republic of China
Translated English of Chinese Standard: GB 8410-2006 www.chinesestandard.net Email: Sales@ChineseStandard.net ICS 13. 220. 40 T 09 National Standard of People s Republic of China GB GB 8410-2006 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T11918.1-2014 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.120.30 K 30 GB/T 11918.1-2014 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T31467.3-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.080 T 47 GB/T 31467.3-2015 Lithium-ion
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. QC/T Translated English of Chinese Standard: QC/T
Translated English of Chinese Standard: QC/T970- www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net AUTOMOTIVE INDUSTRY STANDARD QC OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.060.20
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T3190-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 77.150.10 H 60 GB/T 3190-2008 Replacing
More informationSafety Requirements for Portable Metal Ladders 便携式金属梯安全要求
ICS 13.100 C 68 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中华人民共和国国家标准 GB 12142-2007 Replace GB 12142-1989 and GB 7059.3-1986 Safety Requirements for Portable Metal Ladders 便携式金属梯安全要求 How to BUY
More informationElectric Vehicle Conductive Charging System A.C./D.C. Electric Vehicle Charging Station
Translated English of Chinese Standard: GB/T18487.3-2001 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE GB PEOPLE S REPUBLIC OF CHINA ICS 29.060.10 T 36 GB/T 1 8487.3-2001 Electric
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB 811-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 13.340.20 C 73 GB 811-2010 Replacing GB
More informationQC/T Translated English of Chinese Standard: QC/T
Translated English of Chinese Standard: QC/T792-2007 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL AUTOMOTIVE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA QC ICS 43.140 T 81 QC/T 792-2007
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T31258-2014 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 97.200.40
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. JT/T Translated English of Chinese Standard: JT/T
Translated English of Chinese Standard: JT/T1094-2016 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL TRANSPORTATION INDUSTRY JT STANDARD OF THEPEOPLE S REPUBLIC OF CHINA ICS 43.080.20 T 42
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T26774-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.150 T 50 GB/T 26774-2016 Replacing
More informationTechnical Information
Subject Regulations on the sulphur content of fuel oil within the Yangtze River Delta emission control area implemented from 1 September 2017 To whom it may concern Technical Information No. TEC-1130 Date
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB15084-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.040.60 T 26 GB 15084-2013 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T702-2008 www.chinesestandard.net Sales@ChineseStandard.net GB ICS 70.140.60 H 44 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T 702-2008 Replacing
More informationThePeople s RepublicofChina
ThePeople s RepublicofChina EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equaljusticefor al,abeterinformedcitizenry,theruleoflaw,worldtradeandworld peace,thislegaldocumentisherebymadeavailableonanoncommercial
More informationThePeople s RepublicofChina
ThePeople s RepublicofChina EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equaljusticefor al,abeterinformedcitizenry,theruleoflaw,worldtradeandworld peace,thislegaldocumentisherebymadeavailableonanoncommercial
More informationSafety Requirements for Portable Metal Ladders
Translated English of Chinese Standard: GB12142-2007 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 13.100 C 68 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32599-2 SOUTH AFRICAN NATIONAL STANDARD Electrical security installations Part 3: Electric fences (non-lethal) and manufacture requirements WARNING This document references other documents
More informationGB / IEC :2011
Translated English of Chinese Standard: GB7251.1-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.130 K 31 GB 7251.1-2013 / IEC 60439-1:2011
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T
Translated English of Chinese Standard: GB/T23341.2-2009 www.chinesestandard.net Sales@ChineseStandard.net ICS 27.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB J 91 Turbochargers - Part 2:
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T4780-2000 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.040.60 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB
More informationTECHNICAL SPECIFICATION
IEC/TS 62257-7-3 TECHNICAL SPECIFICATION Edition 1.0 2008-04 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set Selection of generator sets
More informationJJG Translated English of Chinese Standard: JJG Wayne Zheng et. al
Translated English of Chinese Standard: JJG797-2013 www.chinesestandard.net Wayne Zheng et. al Sales@ChineseStandard.net JJG National Metrological Verification Regulations of the People s Republic of China
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16852 Second edition 2016-10-15 Flame arresters Performance requirements, test methods and limits for use Arrête-flammes Exigences de performance, méthodes d essai et limites
More informationISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Fourth edition 2011-05-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2011(E)
More informationJJG Translated English of Chinese Standard: JJG
Translated English of Chinese Standard: JJG646-2006 www.chinesestandard.net Sales@ChineseStandard.net National Metrological Verification Regulation of the People's Republic of China JJG JJG 646-2006 Locomotive
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-1 Second edition 2016-04-01 Road vehicles Circuit breakers Part 1: Definitions and general test requirements Véhicules routiers Coupe-circuits Partie 1: Définitions et
More informationISO 1185 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1185 Third edition 2003-10-15 Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal
More informationISO 2941 INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating
INTERNATIONAL STANDARD ISO 2941 Second edition 2009-04-01 Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating Transmissions hydrauliques Éléments filtrants Vérification
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28761-0 SOUTH AFRICAN NATIONAL STANDARD Earthing of low-voltage (LV) distribution systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33678-3 SANS 1239:2004 Any reference to SABS 1239 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Plugs, socket-outlets
More informationTSG N Translated English of Chinese Standard: TSG N TSG
Translated English of Chinese Standard: TSG N0001-2017 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net TSG SPECIAL EQUIPMENT SAFETY TECHNICAL SPECIFICATION TSG N0001-2017
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
More informationAS/NZS :2016. Grid connection of energy systems via inverters AS/NZS :2016. Part 1: Installation requirements
AS/NZS 4777.1:2016 Australian/New Zealand Standard Grid connection of energy systems via inverters Part 1: Installation requirements AS/NZS 4777.1:2016 AS/NZS 4777.1:2016 This joint Australian/New Zealand
More informationAS AS Australian Standard. Starter batteries Lead acid. This is a free 6 page sample. Access the full version online.
AS 2149 2003 AS 2149 Australian Standard Starter batteries Lead acid This Australian Standard was prepared by Committee EL-005, Secondary Batteries. It was approved on behalf of the Council of Standards
More informationAustralian Standard. Rotating electrical machines. Part 9: Noise limits AS IEC , Ed. 4.1 (2007) AS
AS 60034.9 2009 IEC 60034-9, Ed. 4.1 (2007) AS 60034.9 2009 Australian Standard Rotating electrical machines Part 9: Noise limits This Australian Standard was prepared by Committee EL-009, Rotating Electrical
More informationISO/TC 131/SC Pneumatic fluid power Cylinders, kpa (10 bar) series Mounting dimensions of rod-end clevises
DRAFT INTERNATIONAL STANDARD ISO/DIS 8140 ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on: 2017-06-07 2017-08-29 Pneumatic fluid power Cylinders, 1 000 kpa (10 bar) series Mounting
More informationISO/TC 131/SC
DRAFT INTERNATIONAL STANDARD ISO/DIS 6149-1 ISO/TC 131/SC 4 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
More informationISO 4411 INTERNATIONAL STANDARD. Hydraulic fluid power Valves Determination of pressure differential/flow characteristics
INTERNATIONAL STANDARD ISO 4411 Second edition 2008-10-01 Hydraulic fluid power Valves Determination of pressure differential/flow characteristics Transmissions hydrauliques Distributeurs Détermination
More informationISO 4395 INTERNATIONAL STANDARD. Fluid power systems and components Cylinder piston rod end types and dimensions
INTERNATIONAL STANDARD ISO 4395 Second edition 2009-10-15 Fluid power systems and components Cylinder piston rod end types and dimensions Transmissions hydrauliques et pneumatiques Dimensions et types
More informationالهيئة السعىدية للمىاصفبت والمقبييس والجىدة Saudi Standards, Metrology and Quality Org (SASO)
الهيئة السعىدية للمىاصفبت والمقبييس والجىدة Saudi Standards, Metrology and Quality Org (SASO) Draft Standard SASO IEC 60034-30-1:XXXX ROTATING ELECTRICAL MACHINES Part 30-1: Efficiency classes of line
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T18487.1-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.040.99 T 35 GB/T 18487.1-2015 Replacing
More informationISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie
INTERNATIONAL STANDARD ISO 9129 Second edition 2008-05-15 Motorcycles Measurement methods for moments of inertia Motocycles Méthodes de mesure des moments d'inertie Reference number ISO 2008 PDF disclaimer
More informationISO 2320 INTERNATIONAL STANDARD. Prevailing torque type steel nuts Mechanical and performance properties
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 2320 Fourth edition 2008-11-01 Prevailing torque type steel nuts Mechanical and performance properties Écrous autofreinés en acier Caractéristiques
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6149-1 Second edition 2006-02-15 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31488-0 SOUTH AFRICAN NATIONAL STANDARD Switchgear Metal-enclosed ring main units for rated a.c. voltages above 1 kv and up to and including 36 kv WARNING This document references other
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62281 Edition 2.0 2012-12 colour inside Safety of primary and secondary lithium cells and batteries during transport INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE T ICS
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 23671 Second edition 2015-09-01 Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres Pneumatiques pour voitures particulières Méthode de mesure
More information