Prof. Dr. Hu J., University of Michigan (USA) Prof. Kampker A., RWTH Aachen (D) Prof. Kolar J., ETH Zuerich (CH) Prof. Meins J., TU Braunschweig (D)

Size: px
Start display at page:

Download "Prof. Dr. Hu J., University of Michigan (USA) Prof. Kampker A., RWTH Aachen (D) Prof. Kolar J., ETH Zuerich (CH) Prof. Meins J., TU Braunschweig (D)"

Transcription

1

2

3 CONTENT ABOUT E DPC COMMITTEES... 3 FOREWORDS... 5 SPONSORS PARTNERS TIME TABLE - OVERVIEW TUTORIALS TIME SCHEDULE E T EV TECHNICAL TOURS EXHIBITION SOCIAL PROGRAMM ON-SITE PLAN APPROACH Increasing power consumption, CO2 reduction, growing mobility or progressing automation all of these future megatrends are not possible without powerful electric drives. The electrification of the automobile powertrain system is considered crucial, as the whole sector is facing difficulties resulting from the substitution of the complete conventional powertrain. Besides advancing ideas on the design of powerful electric drives, the organization of the manufacturing processes and systems is of great importance. The second International Electric Drives Production Conference offers an outstanding platform for the exchange of experiences for developers, researchers and potential users. The focus of the conference will be set on the presentation of highly innovative products from various industries as well as manufacturing processes and strategies. The focus of the accompanying E TEV Conference 2012 will be set on the technology of the wireless power transfer as well as the mark e t development and needed prearrangements. Following the conference, there will be an industrial exhibition, tutorials, a poster presentation and technical tours. INTERNATIONAL CONFERENCE COMMITTEE CONFERENCE CHAIRMAN INTERNATIONAL PROGRAM COMMITTEE Prof. Franke J., University of Erlangen Nuremberg (D) PUBLICATION CHAIRMAN Prof. Hahn I., U niversity of Erlangen Nuremberg (D) LOCAL ORGANIZING COMMITTEE Dr. Becker S., U niversity of Erlangen Nuremberg (D) Prof. Drummer D., University of Erlangen Nuremberg (D) Prof. Feldmann K., University of Erlangen Nuremberg (D) Prof. Kremser A., University of Applied Sciences Nuremberg (D) Kuehl A., University of Erlangen Nuremberg (D) Prof. Piepenbreier B., University of Erlangen Nuremberg (D) Prof. Willner K., University of Erlangen Nuremberg (D) Prof. Abele E., TU Darmstadt (D) Prof. Arai T., University of Tokyo (J) Baumueller A., Baumueller GmbH (D) Dr. Brandes J., Siemens AG (D) Prof. Consoli A., University of Catania (I) Prof. Dietz A., University of Applied Sciences Nuremberg (D) Prof. Ehmann B., University of Queensland (AUS) Dr. Endisch C., Audi AG (D) Prof. Frey L., Fraunhofer IISB (D) Fritsch W., ABM Greiffenberger Antriebstechnik GmbH (D) Prof. Gerling D., University of the Federal Armed Forces Munich (D) Dr. Gerstenberger J., Robert Bosch GmbH (D) Hagemann B., Power Transmission Research Association FVA (D) Prof. Dr. Hu J., University of Michigan (USA) Prof. Kampker A., RWTH Aachen (D) Prof. Kolar J., ETH Zuerich (CH) Prof. Meins J., TU Braunschweig (D) Dr. Moebius F., BMW Peugeot Citroen Electrification GmbH (D) PD Dr. Moeckel A., Technical University of Ilmenau (D) Prof. Monkman G., University of Applied Sciences Regensburg (D) Muhr P., Buehler Motor GmbH (D) Prof. Muhs J., Utah State University (USA) Prof. Muetze A., TU Graz (A) Noguchi K., Aichi Steel Corporation (J) Pollmeier S., VDE Power Engineering Society (D) Dr. Sakki R., ABB Ltd (FIN) Prof. Schluecker E., University of Erlangen Nuremberg (D) Prof. Schmidt M., University of Erlangen Nuremberg (D) Prof. Steinhilper R., University of Bayreuth (D) Prof. Suh I.-S., Korea Advanced Institute of Science and Technology (KOR) Prof. Verl A., University of Stuttgart (D) Dr. Vitek O., Brno University of Technology (CZ) Dr. Waasner M., Gebr. Waasner GmbH (D) Prof. Werner R., TU Chemnitz (D) 3

4

5 FOREWORD BY THE LORD MAYOR OF NUREMBERG Dear reader, I cordially welcome all participants to E DPC 2012 The 2 ence on Electric Drives Production here in Nuremberg. International Confernd Nuremberg is an international meeting place for researchers, developers and producers. The conditions at the Nuremberg congress location are ideal for exchanging views and developing ideas. The City of Nuremberg is a perfect location for your conference activities. Tackling the global questions that arise from a growing demand in energy and the prevention of man-made climate change, we have to substitute fossil power generation with renewable technologies and dramatically reduce our energy consumption. For the latter, cheap, efficient electric drives are of central importance. Even more so as such drives will soon play a central role in the implementation of electric mobility. Dr. Ulrich Maly Lord Mayor of the City of Nuremberg At the 2 nd International Conference on Electric Drives Production aforementioned efficient electric drives, cost-effective production technologies and electric mobility will be discussed. The Conference is well placed in the Nuremberg Metropolitan Region as it is an important European business location with strong clusters in "automation and production", "energy and environment" and "power electronics". I wish the 2 nd International Conference on Electric Drives Production success and the participants interesting, informative and profitable days. I hope you will also find a little time to retire from the hectic daily routine of the meeting and get to know the City of Nuremberg better. Try exploring Nuremberg's varied tourist, cultural and culinary trails and have a pleasant stay. Dr. Ulrich Maly Lord Mayor of the City of Nuremberg 5

6 FOREWORD BY THE CONFERENCE SPONSOR The mandate of sustainability Our entrepreneurship is governed by increasing urbanization, resulting in greater mobility and growing demand for electricity, but at the same time by our concerns for climate protection and reduction of CO2 emissions. Since we focus on mastering those challenges in the best possible way I was especially alarmed to hear that global carbon dioxide emissions in 2011 were the highest ever recorded. Did we not take our mandate of sustainability seriously enough? The main causers are the emerging countries in which industrialization and urbanization are growing at a rate that is much faster than the average. Whereas industrialized countries are already taking new and generally successful steps to drastically reduce CO2 emissions, these countries remain on the starting line in terms of sustainable industrial activity. Ralf-Michael Franke CEO Drive Technologies Siemens Industry As a global-player company, we regard it as our duty to support the industry in these countries in particular, and to provide concrete solutions for sustainability. The key to this is local presence. Only when we understand the markets and needs of the participating players, are we in a position to provide optimum benefit. Only when we are available locally, are we able to respond quickly and reliably to requirements. It is just as important, however, to maintain a clear overview a holistic approach. It is not the most innovative solution, but the most easily integrated one, that will be successful: Easily integrated in an existing plant, in an existing infrastructure, and ultimately in the respective living environment. It is clear from political efforts that electromobility is one of the most promising levers for reducing CO2 emissions. In China, for example, the number of private automobiles is predicted to rise from 55 million today to 140 million in The Chinese government hopes that almost 12 million of these will be electric cars. How can we as a globally acting industrial corporation contribute to this? Through software integration and IT solutions with the focus on energy efficiency, we can ensure an integrated production process for our customers that will allow them to achieve maximum productivity and a faster time-to-market. We also develop key technological components for the drive train of electrically driven cars and light commercial vehicles. Our portfolio includes electric motors, power electronics and intelligent onboard charging technology. Here we can rely on the experience gained through our partnerships with leading automobile manufacturers. Ralf-Michael Franke CEO Drive Technologies Siemens Industry 6

7 FOREWORD BY THE EXHIBITION ORGANIZER Welcome to E DPC 2012! As a conference and exhibition organizer dedicated to technology topics it is one of our most fascinating tasks to develop and support new platforms helping to promote communication between scientific ideas and industrial requirements. This year, we are delighted to co-organize the second edition of E DPC alongside the Institute for Factory Automation and Production Systems. The growing success of electric drives in every-day applications and products, the growth of renewable energy production, e-mobility, advancing automation and the demands of new legislations have brought many challenges to the industry and place high emphasis on the development of new and cost-effective production technologies. As a result, companies have to react fast to new settings and need to adapt to a changing reality. Still, many questions and problems remain unresolved. Petra Haaarburger President Mesago Messe Frankfurt GmbH At this point of the development it is important to create a mutual, international platform for the exchange of information, for collaborations and cooperations along the entire value chain. E DPC has committed to becoming that platform. At E DPC you get first-hand information about materials, technologies and applications for the production of electric drives. The close link between the conference and the exhibition guarantees a comprehensive overview about trends and innovations and offers the opportunity for discussions about today's developments and tomorrow's opportunities. With this in mind I wish you inspiring conference and exhibition days at E DPC 2012! Petra Haarburger Mesago Messe Frankfurt GmbH 7

8

9 FOREWORD BY THE CONFERENCE CHAIRMAN Dear Participants of the E DPC 2012! Innovative electric drive concepts help to solve the enormous challenges of our modern civilization: Electric generators provide disregarded almost 100 % of the growing demand for electric energy, electric traction drives enable clean, quiet and efficient mobility and electric motors borrow men's work in production, at construction sites and at home. Besides the importance of a differentiating design of the electric motors the perfect fulfillment of the entire supply chain, the ability to use and process new materials, the deep knowledge of all production processes and the capability to operate them at their limits as well as a holistic view on the integrated production system is exceedingly decisive for the competitiveness of the electric motor manufactures in a global market. Prof. Dr.-Ing. Jörg Franke Head of the Institute for Manufacturing Automation and Production Systems University of Erlangen Nuremberg So energy density and efficiency, weight and installation size, quality and reliability, environmental and social compatibility and last but not least costs and risks are tremendously predisposed by manufacturing. To correspond to these increasing requirements for engineers in product and process nd development the 2 International Electric Drives Production Conference (E DPC) 2012 offers in 66 profound presentations the latest know-how in all related areas, from innovative motor and control concepts, new materials and their preparation methods, detailed processes of power electronics assembly, wire winding, magnet handling, final test, and remanufacturing strategies. Furthermore, for the first time the increasing demand for innovative charging technologies for electric vehicles is communicated in a new platform: The Energy Transfer in Electric Vehicle Conference (E TEV 2012). For basic physical principles, core materials, and main production processes are similar, the E TEV is complementing the E DPC simultaneously at the same congress site. We are proud having been successful in gathering the who-is-who in the worldwide inductive power transfer community. With the accompanying dedicated exhibition, the instructive tutorials at the beginning, the world's most comprehensive congress program in electric drives production, the exciting technical tours to leading manufacturers and research institutes as well as the diverting social program, the E DPC 2012 will offer you a great opportunity to inspire your creativity and to meet interesting like-minded people. I am looking forward to meeting you at E DPC 2012 in Nuremberg! Prof. Dr.-Ing. Jörg Franke E DPC Chairman 9

10

11

12 TIMETABLE - OVERVIEW Monday, October 15 th, :00 AM Tutorials 7:00 PM Speakers Reception 9:00 AM 10:30 AM Opening Session Coffee Break Tuesday, October 16 th, 2012 Session Chair: Prof. Franke J., University of Erlangen-Nuremberg (D) 11:00 AM Session 1 Session 2 Future Challenges in Production New Electric Motor Concepts Session Chair: Prof. Kampker A., RWTH Aachen University (D) Session Chair: Prof. Hahn I., University of Erlangen-Nuremberg (D) 12:15 PM Lunch Break 1:45 PM Session 3 Session 4 Session E TEV I Magnetic Sheet Metal Processing Control Methods Wireless Power Transfer Technology Session Chair: Dr. Waasner M., Gebrueder Waasner GmbH (D) Session Chair: Prof. Piepenbreier B., University of Erlangen-Nuremberg (D) Session Chair: Muhs J., Energy Dynamics Laboratory, Logan (USA) 3:30 PM Coffee Break 4:30 PM Session 5 Session 6 Session E TEV II Integration and Production of Simulation and Calculation Power Electronics Session Chair: Prof. Kremser A., University of Applied Sciences Nuremberg (D) Session Chair: Dr. Becker S., University of Erlangen-Nuremberg (D) Pre-arrangements for Initial Market Development Session Chair: Prof. Meins J., TU Braunschweig (D) 7:00 PM Conference Dinner 9:00 AM Session 7 Session 8 Session E TEV III Winding Technologies Session Chair: Prof. Willner K., University Erlangen-Nuremberg (D) Wednesday, October 17 th, 2012 Magnet Manufacturing and Test Session Chair: Prof. Drummer D., University of Erlangen-Nuremberg (D) Technology Integration and Standardization Session Chair: Prof. Frey L., Fraunhofer IISB, Erlangen (D) 10:40 AM Coffee Break 11:25 AM Session 9 Session 10 Session E TEV IV Winding Assembly and Quality Assurance Session Chair: PD Dr. Moeckel A., Ilmenau University of Technology (D) Innovative Approaches for the Magnetic Flux Session Chair: Prof. Gerling D., University of the Federal Armed Forces Munich (D) Further Considerations for Mass Market Development Session Chair: Prof. Weigel R., University of Erlangen-Nuremberg (D) 1:05 PM Lunch Break & Postersession Session Chair: Prof. Dietz A., University of Applied Sciences Nuremberg (D) 2:45 PM Session 11 Session 12 Innovative Production New Materials Concepts and Processes Session Chair: Prof. Steinhilper R., University of Bayreuth (D) Session Chair: Prof. Feldmann K., University of Erlangen-Nuremberg (D) 4:25 PM Coffee Break 5:00 PM Best Paper Award 5:25 PM 9:30 AM Closing Words and Look-Out Technical Tours Thursday, October 18 th,

13 TUTORIALS During the tutorials vendors of materials, product and process technologies, service providers and research organizations will provide the participants with a profound and applied know-how about specific topics. Tutorials will be held in English or German. Find more information on our website Monday, October 15 th, 2012 Tutorial 1: 10:00 AM - 1:00 PM; CCN Ost Ebene 2 - Raum Prag EUR 100,- Energy-Efficient Drives Baumueller Nuernberg GmbH The production expenses (cost of materials, manufacturing costs ) of three typical motor types will be compared. Those will be opposed to the efficiency of the motors in the machine. In addition there will be an explanation of the means to influence energy efficiency based on the life cycle costs of production plants and machines. Example calculations will underline these comments. Tutorial 2: 10:00 AM - 1:00 PM; CCN Ost Ebene 2 - Raum Budapest EUR 100,- Acoustics of Electric Drives University of Erlangen-Nuremberg, Institute of Process Machinery and Systems Engineering The tutorial will give an overview of different mechanisms of sound generation and currently used important measurement and computational techniques for the determination of the acoustic field in electric drive systems. Three basic phenomena of sound generation can be distinguished: flow-induced sound created by the unsteady flow in the cooling systems and both vibrational sound due to moving surfaces and electromagnetic forces. Besides these basic mechanisms complex interactions are possible. Another important issue of the tutorial is the psychoacoustic analysis of the radiated sound field. Tutorial 3: 2:00 PM - 5:00 PM; CCN Ost Ebene 2 - Raum Prag EUR 100,- Magnetic Field Camera for Fast and Complete Inspection of Permanent Magnets MagCam NV This tutorial introduces the participants to the possibilities of magnetic field camera technology for fast and accurate inspection of permanent magnets in R&D, production and quality control of electric drives. Tutorial 4: 2:00 PM - 5:00 PM; CCN Ost Ebene 2 - Raum Budapest EUR 100,- Symbolic Techniques for Model- Based Design of Energy Storage and Electric Drive Systems for Plug-In Hybrid Electric Vehicles Maplesoft Europe GmbH This tutorial will guide you through the process of developing a symbolic model of a power-split PHEV, consisting of a controller to control vehicle and battery states, a mean-value internal combustion (IC) engine, an electric generator powered by the IC engine, a battery, a DC motor/generator, and a 3D vehicle multibody dynamic model. 13

14 ON-SITE ORGANIZATION The registration desk is located in level 0 of the NCC Ost. Opening time: Monday, th October 15, 2012: 8:00 AM - 7:00 PM Tuesday, th October 16, 2012: 8:00 AM - 7:00 PM th Wednesday, October 17, 2012: 8:00 AM - 7:00 PM Phone: +49 (911) Conference bags can be picked up at the registration desk. On-spot registrations for the conference, the technical tours, the evening event and the conference WiFi will be possible. On-site payments can be settled in cash (EUR) or by a credit card. The on-spot speakers reception and welcome drink will th take place on Monday, October 15, :00 PM in the exhibition foyer. PUBLICATION All papers accepted and registered will be included in conference proceedings and also published at ieeexplore.org and scopus.com. TIME SCHEDULE Tuesday, October 16 th, 2012 Morning Opening Session 9:00 AM 9:30 AM 10:00 AM 10:30 AM The All-Electric Society Based on Electric Drives, Prof. Franke J., University of Erlangen-Nuremberg (D) Experience Drives Innovation, Franke R.-M., CEO Drive Technologies - Siemens AG (D) E-Drives for Automotive Applications, Dr. Humpert A., MD EM-motive GmbH (D) Coffee Break Session 1 Session 2 Future Challenges in Production New Electric Motor Concepts Session Chair: Prof. Kampker A., RWTH Aachen University (D) Session Chair: Prof. Hahn I., University of Erlangen-Nuremberg (D) 11:00 AM Flexible Production Lines for Series Production of Automotive Electric Drives Stoll J., Karlsruhe Institute of Technology (D) 11:25 AM The Global Markets for Energy Efficient Motors and Drives Chausovsky A., IMS Research, Austin (USA) 11:50 AM Remanufacturing of Components for Automotive E-Mobility Prof. Steinhilper R., University of Bayreuth (D) 12:15 PM Cost, Quality and Scalability: Impact on the ValueChainofElectricEngineProduction Nee C., RWTH Aachen University (D) A Highly Innovated Transversal Flux Motor Design with Integrated Inverter Dr. Mueller C., Compact Dynamics GmbH, Starnberg (D) Features of the Design of Traction Induction Motors Dr. Florentsev S., Ruselprom-ElectroDrive Ltd, Moscow (RUS) Electrical Machines with Laminated Winding for Hybrid Vehicle Applications Hoegmark C., Lund University (S) Low Costs and High-Efficiency Electric Machines Dr. Dajaku G., FEAAM GmbH, Neubiberg (D) 12:15 PM Lunch Break 14

15 TIME SCHEDULE Tuesday, October 16 th, 2012 Afternoon 12:15 PM Lunch Break Session 3 Session 4 Magnetic Sheet Metal Processing Control Methods Session Chair: Dr. Waasner M., Gebrueder Waasner GmbH (D) Session Chair: Prof. Piepenbreier B., University Erlangen-Nuremberg (D) 1:45 PM Highly Flexible and Efficient Shaft Manufacture for Customized Electric Machines Dr. Junker S., Baumueller Nuernberg GmbH, Nuremberg (D) 2:10 PM Rotational Cutting of Lamination Sheets for Electrical Machines Hackert J., Vipem Hackert GmbH, Gruenbach (D) 2:35 PM Various Aspects of Rotor Eddy Current Losses in Permanent Magnet Machines Dorfner M., Siemens AG, Munich (D) 3:00 PM Investigations of Eddy Current Losses in Laminated Cores Due to the Impact of Various Stacking Processes Lamprecht E., Daimler AG, Stuttgart (D) Compositional Modeling and Control for Safety-Critical Manufacturing Systems Uygur G., University of Erlangen-Nuremberg (D) A Novel Algorithm for Model Predictive Control of AC Electric Drives Saeidi S., Munich University of Technology (D) Performance of Position Control of a Permanent Magnet Sensorless Drive Dr. Alatalo M., AROS Electronics AB, Moelndal (S) Novel Control Method Enabling the Adaptability of Multi-Phase Inverters for Electric Vehicles Knischourek E., FEAAM GmbH, Neubiberg (D) 3:30 PM Coffee Break Session 5 Session 6 Integration and Production of Power Electronics Simulation and Calculation Session Chair: Prof. Kremser A., University of Applied Sciences Nuremberg (D) Session Chair: Dr. Becker S., University of Erlangen-Nuremberg (D) 4:30 PM Pre-applied Thermal Interface Solution Simplifies Mounting and Reduces Assembly- and Maintenance Times Dr. Schulz M., Infineon Technologies, Warstein (D) 4:55 PM Methodical Integration of Assembly Specific Influences concerning High-Voltage Components into the Virtual Validation Process Dr. Matzka S., Audi AG, Ingolstadt (D) 5:20 PM Embedding of Electronic Components for Electromobility Randoll R., Daimler AG, Boeblingen (D) 5:45 PM Compact Power Electronic Modules for E-Mobility, Drive and Lighting Technologies Prof. Albrecht H.J., Siemens AG, Berlin (D) Energy Optimisation of Sensorless Induction Motor Drives Using a Novel Robust-Adaptive Flux Simulator Ashari D., University of Huddersfield (GB) Symbolic Techniques for Model-based Design of Energy Storage and Electric Drive Systems for Plug-in Hybrid Electric Vehicles Dr. Dao T., Maplesoft, Waterloo (CDN) Development of a Model to Describe the Stiffness of an Electric Motor Lamination Stack Luchscheider V., University of Erlangen-Nuremberg (D) Improved Iron Loss Modelling Approach for Advanced Electrical Steels Operating at High Frequencies and High Inductions in Automotive Machines Jacobs S., ArcelorMittal, Zwijnaarde (B) 7:00 PM Conference Dinner 15

16 TIME SCHEDULE Wednesday, October 17 th, 2012 Morning Session 7 Session 8 Winding Technologies Session Chair: Prof. Willner K., University Erlangen-Nuremberg (D) Magnet Manufacturing and Test Session Chair: Prof. Drummer D., University of Erlangen-Nuremberg (D) 9:00 AM Manufacturing Cell for Winding and Assembling a Segmented Stator of PM-Synchronous Machines for Hybrid Vehicles Bickel B., University of Erlangen-Nuremberg (D) 9:25 AM An Alternative Production Process for Electric Machine Windings Svensson L., Lund University (S) Improvement of the Filler Orientability during Injection Molding of Multi-Polar SmCo-Magnets by Premagnetization Gardocki A., University of Erlangen-Nuremberg (D) Analysis of the Injection Molding Process of Soft Magnetic Plastics Compounds Fragner J., RWTH Aachen University (D) 9:50 AM Winding Processes - Current and Future Challenges and Opportunities Hall Sensor Line Array for Magnetic Field Inline Measurements of PM-Exited Rotors for Automation Equipment Suppliers Tremel J., University of Erlangen-Nuremberg (D) Lang, T., ATS Wickel- und Montagetechnik AG, Würenlos (CH) 10:15 AM Evolution of Winding Technologies on Open Poles Stators Kiefer D., Marsilli & Co. S.p.A., Castelleone (I) Large Area Magnetic Field Camera for Inline Motor Magnet Inspection Dr. Vervaeke K., MagCam NV, Leuven (B) 10:40 AM Coffee Break Session 9 Session 10 Winding Assembly and Quality Assurance Innovative Approaches for the Magnetic Flux Session Chair: PD Dr. Moeckel A., Ilmenau University of Technology (D) Session Chair: Prof. Gerling D., University of the Federal Armed Forces Munich (D) 11:25 AM Increased Power Density of Permanent Magnet Synchronous Machines Permanent Magnet Technology for Electric Motors in Automotive Applications by Use of Concentrated Bar Windings Dr. Zhang S., Endert F., Ilmenau University of Technology (D) Brose Fahrzeugteile GmbH & Co. KG, Wuerzburg (D) 11:50 AM Development of Divided Core Motor Production Technique Featuring Assembly by Press Fitting Yamamoto K., Mitsubishi Electric, Amagasaki (J) 12:15 PM Vacuum-Aided Potting for High-Voltage Components MurgiaM.,ScheugenpflugAG,Neustadta.d.Donau(D) 12:40 PM The Ideal Depth of Value Added in Disruptive Markets Using the Production of TractionMotorsasanExample Wowreczko D., RWTH Aachen University (D) Comparison of Soft Magnetic Composites (SMC) and Electrical Steel Boehm A., University of Erlangen-Nuremberg (D) The Scale of Permanent Magnet Materials for Automotive Traction Motors FyhrP.,LundUniversity(S) Influencing Factors on Rotor Overmold Designs for Robustness against Media and Thermal Shocks Dr. Boehm R., Buehler Motor GmbH, Nuremberg (D) 1:05 PM Lunch Break & Postersession 16

17 TIME SCHEDULE Wednesday, October 17 th, 2012 Afternoon 1:05 PM Lunch Break & Postersession Postersession Session Chair: Prof. Dietz A., University of Applied Sciences Nuremberg (D) Ecological Lifecycle Assessment of an Electronic Drive for the Automotive Industry Buchkremer S., RWTH Aachen University (D) Innovative Motion Control in Medical Technology A novel approach with emphasis on PADs (Piezoelectric Actuator Drives) Farmbauer K., Siemens AG, Kemnath (D) Heat Conductive Thermosets for the Injection Moulding Process Rudin B., University of Erlangen-Nuremberg (D) The Influence of CAD/CAM Application Driven Tool Path Generation on the Design Process of Electric Drive Trains for Machine Tools Schreiner T., Fraunhofer IPT, Aachen (D) Effects of Powertrain Electrification on Production and Personnel Structures Herrmann F., Fraunhofer IAO, Stuttgart (D) ModularInverterPowerElectronicfor Intelligent e-drives Hofmann M., Fraunhofer IISB, Erlangen (D) Electric Vehicles - A Cost Model of Electric Propulsion Systems Seisenberger S., University of Erlangen-Nuremberg (D) Magnetoresistive Sensors for High Performance Electric Drives Dr. Slatter R., Sensitec GmbH, Lahnau (D) Modular Three-Phase Machines with Laminated Winding for Hybrid Vehicle Applications Andersson R., Lund University (S) Production Planning Scenarios for Manufacturing of Electric Drives Kreitlein S., University of Erlangen-Nuremberg (D) Target Technology Development for Small Handheld Powertool Motor with Outstanding Power Density Neubauer A., ANDREAS STIHL AG & Co. KG, Waiblingen (D) Special Manufacturing Technologies for Power Resistors in Drive Applications Stahlhoven B., GINO AG, Bonn (D) New Manufacturing Methods for Electric Motors Using Different Soft Magnetic Material Combinations Svensson L., Lund University (S) Soft-Transition Automotive Inverters with Integrated Battery Charging Function Zarate Vargas O.R., Volkswagen AG, Wolfsburg (D) 17

18 TIME SCHEDULE Wednesday, October 17 th, 2012 Afternoon 1:05 PM Lunch Break & Postersession Session 11 Session 12 Innovative Production Concepts and Processes New Materials Session Chair: Prof. Steinhilper R., University of Bayreuth (D) Session Chair: Prof. Feldmann K., University of Erlangen-Nuremberg (D) 2:45 PM High Volume Production Solutions for Hybrid and Electric Vehicle Powertrains Weseler M., Continental AG, Berlin (D) 3:10 PM Joining Techniques of the Radial Rotor Segmentation of PM-Synchronous Machines for Hybrid Drives Albrecht T., Daimler AG, Stuttgart (D) A Study of the Characteristics of Traction Motor Performance for EV by Electrical Steel Lim Y., POSCO, Seoul (KOR) Application-specific Development of Non-Oriented Electrical Steel for EV Traction Drives Tietz M., ThyssenKrupp Electrical Steel GmbH, Bochum (D) 3:35 PM Robust Laser Micro Welding of Aluminium and Drive Your Drives More Efficiently Copper for Vehicle Electrical Systems Zettler M., VICTREX Europa GmbH, Hofheim (D) Hugger F., Bayerisches Laserzentrum, Erlangen (D) 4:00 PM 3D Screen Printing Technology Opportunities to use Revolutionary Materials and Machine Designs Braeuer P., Chemnitz University of Technology (D) Assembly Injection Molded Friction Clutches as Mechanical Overload Protection for Mechatronic Devices Merken D., University of Erlangen-Nuremberg (D) 4:25 PM Coffee Break 5:00 PM Best Paper Award 5:25 PM Closing Words and Look-Out 18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33 SOCIAL PROGRAM Tuesday, October 16 th, 2012 CONFERENCE DINNER GUIDED WALKING TOURS The E DPC 2012 evening event is an official stand-up reception, given by the Lord Mayor of the City of Nuremberg at the historic townhall of Nuremberg, Rathausplatz 2. Detailed technical discussions are guaranteed and accompanied by piano background music and a carried franconian buffet. Parallel to the conference dinner several half-hour guided tours through the historical town of Nuremberg will be offered free of charge. Please register for one of the following tours, using the form on the backside: GUIDED WALKING TOUR A Medieval Dungeons Just walk downstairs and take a tour through the vaulted cellars below the historic townhall, built in Nuremberg's golden age. Let these mediaeval dungeons and the feeling of being imprisoned in the Middle Ages give you some goose bumps. BUFFET A regional buffet will be prepared and served by the catering company ifi -institute for integration. Ifi catering is an integration project and the main part of the workforce is made up of people with disabilities, mostly speech and hearing-impaired. AGENDA 07:30 p.m.: Welcome Adress Dr. Fraas M., Deputy mayor for economic affairs, City of Nuremberg 08:00 p.m.: Opening of the buffet 08:30 p.m.: WalkingTour A, Medieval Dungeons 08:45 p.m.: WalkingTour B, City Museum Fembohaus 09:00 p.m.: WalkingTour C, Nuremberg old town Coypright City of Nuremberg GUIDEDWALKINGTOUR B City Museum Fembohaus A fresh look at history: Nuremberg's only remaining large late Renaissance merchant's house invites visitors on an eventful journey through Nuremberg's history. GUIDEDWALKINGTOUR C Nuremberg old town Take an exciting walk from the townhall, via the famous fountain "Schöner Brunnen" to the castle of Nuremberg. There you'll enjoy the beautiful view over Nuremberg. Please find more information on our website Coypright City of Nuremberg HOTEL RECOMMENDATION For hotel recommendation please contact the tourist office Nuremberg: Tel.: +49 (911) TOURIST INFORMATION Nuremberg Convention and Tourist Office Frauentorgraben Nuremberg Tel.: +49 (911) Historic townhall of Nuremberg Coypright City of Nuremberg 33

34

35

36

2012 2nd International Electric Drives Production Conference (EDPC 2012) Nuremberg, Germany October IEEE Catalog Number: ISBN:

2012 2nd International Electric Drives Production Conference (EDPC 2012) Nuremberg, Germany October IEEE Catalog Number: ISBN: 2012 2nd International Electric Drives Production Conference (EDPC 2012) Nuremberg, Germany 15-18 October 2012 IEEE Catalog Number: ISBN: CFP1285P-PRT 978-1-4673-3007-7 Table of contents 1: Future Challenges

More information

2011 1st International Electric Drives Production Conference (EDPC 2011) Nuremberg, Germany September IEEE Catalog Number: ISBN:

2011 1st International Electric Drives Production Conference (EDPC 2011) Nuremberg, Germany September IEEE Catalog Number: ISBN: 2011 1st International Electric Drives Production Conference (EDPC 2011) Nuremberg, Germany 28-29 September 2011 IEEE Catalog Number: ISBN: CFP1185P-PRT 978-1-4577-1371-2 Table of contents 1: New Electric

More information

The Future of Automobiles and Mobility

The Future of Automobiles and Mobility The Future of Automobiles and Mobility Call for Papers www.fisita2008.com Organised by VDI Our Challenges: Road Safety, Energy and Environment Dear members of the automotive society, The Association of

More information

Call for papers DIESEL POWERTRAINS 3.0. Conference in Stuttgart Area, July 2017 Conference chair: Thomas Körfer FEV Group Holding GmbH

Call for papers DIESEL POWERTRAINS 3.0. Conference in Stuttgart Area, July 2017 Conference chair: Thomas Körfer FEV Group Holding GmbH Call for papers DIESEL POWERTRAINS 3.0 TAILORED ELECTRIFICATION FOR A CLEANER ENVIRONMENT IN 2025 Conference in Stuttgart Area, July 2017 Conference chair: Thomas Körfer FEV Group Holding GmbH IN COOPERATION

More information

Siemens Pioneer in Electric Mobility

Siemens Pioneer in Electric Mobility Siemens Pioneer in Electric Mobility Prof. Dr. Siegfried Russwurm Member of the Managing Board of Siemens AG CEO Siemens Press Conference Munich, August 31, 2011 Siemens Siemens AG, 2011. AG, 2011. All

More information

MAHLE Supervisory Board appoints Dr. Jörg Stratmann as the new Chairman of the Management Board and CEO

MAHLE Supervisory Board appoints Dr. Jörg Stratmann as the new Chairman of the Management Board and CEO P R E S S R E L E A S E MAHLE Supervisory Board appoints Dr. Jörg Stratmann as the new Chairman of the Management Board and CEO The 48-year-old industrial engineer becomes the new CEO of the MAHLE Group

More information

innotrans 2014 mobility the future of september BErliN English innotrans.com

innotrans 2014 mobility the future of september BErliN English innotrans.com innotrans 2014 23 26 september BErliN International Trade Fair for Transport Technology Innovative Components Vehicles Systems innotrans.com the future of mobility English innotrans 2014 2 The future of

More information

IMTC 2015 for Lightweight Structures

IMTC 2015 for Lightweight Structures CLUSTER OF EXCELLENCE MERGE Merge Technologies for Multifunctional Lightweight IMTC 2015 for Lightweight International MERGE Technologies Conference Invitation and Preliminary Programme October 1-2, 2015

More information

Press release. From battery cell to electric motor Bosch paving the way to electromobility 21 projects with 13 automakers by 2013

Press release. From battery cell to electric motor Bosch paving the way to electromobility 21 projects with 13 automakers by 2013 Press release From battery cell to electric motor Bosch paving the way to electromobility 21 projects with 13 automakers by 2013 November 2011 PI 7475 GS mic/af Systems competence is a success factor Joint

More information

Into the Future with E-Mobility

Into the Future with E-Mobility Into the Future with E-Mobility ZF products for hybrid and electric vehicles 2 Content 3 01 Electric Mobility 04 Electric Mobility A Megatrend with Potential 02 03 Drive Systems Products 09 10 11 12 13

More information

19th International Forum on Advanced Microsystems for Automotive Applications

19th International Forum on Advanced Microsystems for Automotive Applications Welcome Address 19th International Forum on Advanced Microsystems for Automotive Applications Berlin, July 7, 2015 Dr. Christian Martin German Federal Ministry of Education and Research (BMBF) Unit Electronic

More information

SYNCHRONIZATION SYSTEMS

SYNCHRONIZATION SYSTEMS SYNCHRONIZATION SYSTEMS Partners for Solutions TWO PARTNERS ONE JOINT SOLUTION Dear Customer, This cooperation highly suggests itself, not only because of our close proximity to each other at several locations

More information

2.2 Deep-dive E-Mobility

2.2 Deep-dive E-Mobility Dr. Jochen Schröder President Business Division E-Mobility Capital Markets Day 2018 Berlin Disclaimer This presentation contains forward-looking statements. The words "anticipate", "assume", "believe",

More information

Deep-dive E-Mobility

Deep-dive E-Mobility Dr. Jochen Schröder President Business Division E-Mobility CES - 17th Annual J.P. Morgan Auto Tech Conference Las Vegas Automotive OEM at a glance Automotive OEM At a Glance Sales and EBIT margin 3) Sales

More information

News Release. BASF further broadens its technology base and global market access for battery materials

News Release. BASF further broadens its technology base and global market access for battery materials News Release BASF further broadens its technology base and global market access for battery materials BASF wants to become the world's leading system supplier of functional materials for high-performance

More information

Member of the Board of Management of BMW AG, Finance

Member of the Board of Management of BMW AG, Finance Statement Dr Friedrich Eichiner Member of the Board of Management of BMW AG, Finance International Press Launch of BMW 5 Series Lisbon, 28 November 2016 I, too, would like to welcome you here today. I

More information

Electrification is taking combustion engines to new heights

Electrification is taking combustion engines to new heights Electrification is taking combustion engines to new heights Dr. Rolf Bulander Member of the board of management of Robert Bosch GmbH Chairman of the Mobility Solutions business sector 1 Megatrends are

More information

Electromobility made in Berlin-Brandenburg

Electromobility made in Berlin-Brandenburg Electromobility made in Berlin-Brandenburg Gernot Lobenberg, Director, Berlin Agency for Electromobility emo 2 Agenda) emo and Partner Electromobility made in Berlin-Brandenburg International Cooperations

More information

Industrial machinery and heavy equipment. Hatz Diesel. Developing a water-cooled industrial engine with the help of Siemens PLM Software

Industrial machinery and heavy equipment. Hatz Diesel. Developing a water-cooled industrial engine with the help of Siemens PLM Software Industrial machinery and heavy equipment Product Simcenter Manufacturer uses Simcenter Amesim to design diesel engines faster and more efficiently Business challenges Meet strict governmental standards

More information

Statement Dr. Norbert Reithofer Chairman of the Board of Management of BMW AG Conference Call Interim Report to 30 June August 2013, 10:00 a.m.

Statement Dr. Norbert Reithofer Chairman of the Board of Management of BMW AG Conference Call Interim Report to 30 June August 2013, 10:00 a.m. - Check against delivery - Statement Dr. Norbert Reithofer Chairman of the Board of Management of BMW AG Conference Call Interim Report to 30 June 2013, 10:00 a.m. Good morning, Ladies and Gentlemen, Today

More information

Electrical 48-V Main Coolant Pump to Reduce CO 2 Emissions

Electrical 48-V Main Coolant Pump to Reduce CO 2 Emissions DEVELOPMENT Cooling Electrical 48-V Main Coolant Pump to Reduce CO 2 Emissions Mahle has developed an electrical main coolant pump for the 48-V on-board net. It replaces the mechanical pump and offers

More information

Auto Move Technologies

Auto Move Technologies We move more for you! Innovative drive solutions »We are satisfied only when our customers are truly impressed. Therefore we move more than is expected from us.«armin Schmid, Managing Director We move

More information

VEDECOM. Institute for Energy Transition. Presentation

VEDECOM. Institute for Energy Transition. Presentation VEDECOM Institute for Energy Transition Presentation version 30/01/2017 TABLE OF CONTENTS 2 1. A research ecosystem unparalleled in France 2. PFA NFI - VEDECOM 3. Corporate film 4. Aim and vision of VEDECOM

More information

HORIBA CONCEPT EUROPE 2018 CONference for Combustion Emissions Particulates and Testing. DATE March 22 nd - 23 rd, 2018 LOCATION.

HORIBA CONCEPT EUROPE 2018 CONference for Combustion Emissions Particulates and Testing. DATE March 22 nd - 23 rd, 2018 LOCATION. HORIBA CONCEPT EUROPE 2018 CONference for Combustion Emissions Particulates and Testing DATE March 22 nd - 23 rd, 2018 LOCATION TOPICS Dresden, Germany Future Emission Requirements and Legislation Testing

More information

Presentor: Jussi Palola, CEO of Virta SWISSCHARGE SEMINAR 1/2018

Presentor: Jussi Palola, CEO of Virta SWISSCHARGE SEMINAR 1/2018 Presentor: Jussi Palola, CEO of Virta SWISSCHARGE SEMINAR 1/2018 Pg 1 SHORT INTRODUCTION Virta Multi-sided Platform EV charging services for the whole value chain Private Electric Charging EV Drivers Mobility

More information

Innovation a Strategic Success Factor for Evonik

Innovation a Strategic Success Factor for Evonik Innovation a Strategic Success Factor for Evonik Forum Chemical Industry Tokyo, September 30, 2015 Dr. Ralf Mayer, Evonik Japan Evonik a global leader in specialty chemicals: key figures 2014 Employees

More information

BERNSTEIN STRATEGIC DECISIONS CONFERENCE 2018

BERNSTEIN STRATEGIC DECISIONS CONFERENCE 2018 ABB LTD, NEW YORK CITY, USA, 31 MAY 2018 Positioned for profitable growth BERNSTEIN STRATEGIC DECISIONS CONFERENCE 2018 Ulrich Spiesshofer, CEO Important notice This presentation includes forward-looking

More information

April 18 25, National Exhibition and Convention Center (Shanghai)

April 18 25, National Exhibition and Convention Center (Shanghai) April 18 25, 2019 National Exhibition Convention Center (Shanghai) Organizers China Association of Automobile Manufacturers China Council for the Promotion of International Trade, Shanghai Sub-Council

More information

Nancy Gioia Director, Global Electrification Ford Motor Company

Nancy Gioia Director, Global Electrification Ford Motor Company Electrification of Transportation It s s a matter of when, not if Key Trends and Drivers for the Future June 14, 2011 Nancy Gioia Director, Global Electrification Ford Motor Company From our Executive

More information

Thema der Arbeit. Discussion of IT-infrastructure for electric mobility. Bachelorarbeit. vorgelegt von. Patrick-Oliver Groß

Thema der Arbeit. Discussion of IT-infrastructure for electric mobility. Bachelorarbeit. vorgelegt von. Patrick-Oliver Groß Thema der Arbeit Discussion of IT-infrastructure for electric mobility Bachelorarbeit zur Erlangung des akademischen Grades Bachelor of Science (B.Sc.) im Studiengang Wirtschaftswissenschaft der Wirtschaftswissenschaftlichen

More information

Concurrent Technical Forums / Conference

Concurrent Technical Forums / Conference Concurrent Technical Forums / Conference SAE China 2005 Congress & International Conference on the Development of China Auto Parts Industry Background Automobile changes the world and human traditional

More information

AND CHANGES IN URBAN MOBILITY PATTERNS

AND CHANGES IN URBAN MOBILITY PATTERNS TECHNOLOGY-ENABLED MOBILITY: Virtual TEsting of Autonomous Vehicles AND CHANGES IN URBAN MOBILITY PATTERNS Technology-Enabled Mobility In the era of the digital revolution everything is inter-connected.

More information

AUDI SUSTAINABILITY PROGRAM

AUDI SUSTAINABILITY PROGRAM Audi Sustainability Report 2017 1 AUDI SUSTAINABILITY PROGRAM The Audi Sustainability Program combines strategic goals in the area of sustainability with concrete measures. It is divided into the four

More information

EVUE Frankfurt am Main - Promoting the use of electric vehicles in daily operations

EVUE Frankfurt am Main - Promoting the use of electric vehicles in daily operations EVUE Frankfurt am Main - Promoting the use of electric vehicles in daily operations Conditions European strategies - White paper for transport 2011 By 2050, key goals for urban transport will include a

More information

May, 21-24, 2007 I Vienna - Austria

May, 21-24, 2007 I Vienna - Austria Vienna 07 25 th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction FIRST ANNOUNCEMENT May, 21-24, 2007 I Vienna - Austria www.cimac.com Come to Vienna,

More information

AVL InMotion 4. Test driving starts now

AVL InMotion 4. Test driving starts now AVL InMotion 4 Test driving starts now THE ADDED VALUE Improved efficiency. Enhanced flexibility. Increased productivity. AVL InMotion 4 is a system driven hardware-in-the-loop test solution for virtual

More information

Annual General Meeting Infineon Technologies AG

Annual General Meeting Infineon Technologies AG Annual General Meeting Infineon Technologies AG Peter Bauer, Chief Executive Officer Infineon Technologies AG Munich, February 17, 2011 Infineon is in a better shape than ever before Restructuring Refinancing

More information

P R E S S R E L E A S E. Balancing heat and cold for improved cruising range, performance, and comfort in electric vehicles

P R E S S R E L E A S E. Balancing heat and cold for improved cruising range, performance, and comfort in electric vehicles P R E S S R E L E A S E Balancing heat and cold for improved cruising range, performance, and comfort in electric vehicles MAHLE s thermal management technology paves the way for electric mobility Cruising

More information

R&D: FUTURE-PROOFING THE BMW GROUP. DR. HERBERT DIESS MEMBER OF THE BOARD OF MANAGEMENT OF BMW AG, DEVELOPMENT

R&D: FUTURE-PROOFING THE BMW GROUP. DR. HERBERT DIESS MEMBER OF THE BOARD OF MANAGEMENT OF BMW AG, DEVELOPMENT March 20, 2013 R&D: FUTURE-PROOFING THE BMW GROUP. DR. HERBERT DIESS MEMBER OF THE BOARD OF MANAGEMENT OF BMW AG, DEVELOPMENT OVERVIEW. 1 Challenges in the automotive industry 2 Our solutions Evolution

More information

Keynote from Andreas Renschler, CEO Volkswagen Truck & Bus GmbH and Yoshio Shimo, President & CEO Hino Motors Ltd.

Keynote from Andreas Renschler, CEO Volkswagen Truck & Bus GmbH and Yoshio Shimo, President & CEO Hino Motors Ltd. Keynote from Andreas Renschler, CEO Volkswagen Truck & Bus GmbH and Yoshio Shimo, President & CEO Hino Motors Ltd.. THE SPOKEN WORD PREVAILS Tokyo, 12.04.2018 Good afternoon. I am Yoshio Shimo, President

More information

System Engineering for the Battery Industry. Electric mobility.

System Engineering for the Battery Industry. Electric mobility. System Engineering for the Battery Industry Electric mobility. 2 3 Extensive experience, a global leader with close proximity to the customers. thyssenkrupp System Engineering is an internationally acting

More information

ELECTRICAL 48 V MAIN COOLANT PUMP TO REDUCE CO 2 EMISSIONS

ELECTRICAL 48 V MAIN COOLANT PUMP TO REDUCE CO 2 EMISSIONS ELECTRICAL 48 V MAIN COOLANT PUMP TO REDUCE CO 2 EMISSIONS Mahle has developed an electrical main coolant pump for the 48 V on-board net. It replaces the mechanical pump and offers further reductions in

More information

North Rhine-Westphalia Moving towards Electromobility. Dr. Matthias Dürr Head of Electromobility NRW

North Rhine-Westphalia Moving towards Electromobility. Dr. Matthias Dürr Head of Electromobility NRW North Rhine-Westphalia Moving towards Electromobility Dr. Matthias Dürr Head of Electromobility NRW Dusseldorf 20 th Oct. 2014 Agenda ElectroMobility NRW Who are we? Motivation for E-mobility Objectives

More information

Focus on the Future Powertrain Strategies for the 21st Century

Focus on the Future Powertrain Strategies for the 21st Century Focus on the Future Powertrain Strategies for the 21st Century University of Michigan July 12, 2011 1 / P ES / Guenther Raab / July 2011 Continental Agenda Challenges in Future Mobility Continental Powertrain

More information

SAFETY ON EVERY CURVE

SAFETY ON EVERY CURVE SAFETY ON EVERY CURVE STEERING AHEAD The Mission of the Willi Elbe Group 2 Comprehensive development expertise, constantly up-to-date operational management, and state-of-the-art production. Discover here

More information

Microgrid solutions Delivering resilient power anywhere at any time

Microgrid solutions Delivering resilient power anywhere at any time Microgrid solutions Delivering resilient power anywhere at any time 2 3 Innovative and flexible solutions for today s energy challenges The global energy and grid transformation is creating multiple challenges

More information

Welcome to the world of electromobility!

Welcome to the world of electromobility! www.siemens.com/drivergy Welcome to the world of electromobility! Drivergy puts electricity on the road Answers for the environment. Contents The future has begun 3 Convenient and economical: Home charging

More information

Orlando, Florida March 25 th, 2013 Automation and Power World 2013 Investor Event

Orlando, Florida March 25 th, 2013 Automation and Power World 2013 Investor Event Orlando, Florida March 25 th, 2013 Automation and Power World 2013 Investor Event Safe-harbor statement This presentation includes forward-looking information and statements including statements concerning

More information

Energy and Mobility Transition in Metropolitan Areas

Energy and Mobility Transition in Metropolitan Areas Energy and Mobility Transition in Metropolitan Areas GOOD GOVERNANCE FOR ENERGY TRANSITION Uruguay, Montevideo, 05/06 October 2016 Energy and Mobility Transition in Metropolitan Areas Agenda I. INTRODUCTION

More information

BOGE Rubber & Plastics achieves record sales and extends its product portfolio with Fiberreinforced rubber-elastic coupling

BOGE Rubber & Plastics achieves record sales and extends its product portfolio with Fiberreinforced rubber-elastic coupling Automotive supplier remains on an expansion course BOGE Rubber & Plastics achieves record sales and extends its product portfolio with Fiberreinforced rubber-elastic coupling Sales grow by 8.6 percent

More information

Stationary Energy Storage Solutions 3. Stationary Energy Storage Solutions

Stationary Energy Storage Solutions 3. Stationary Energy Storage Solutions Stationary Energy Storage Solutions 3 Stationary Energy Storage Solutions 2 Stationary Energy Storage Solutions Stationary Storage: Key element of the future energy system Worldwide growing energy demand,

More information

CHEMICALS AND REFINING. ABB in chemicals and refining A proven approach for transforming your challenges into opportunities

CHEMICALS AND REFINING. ABB in chemicals and refining A proven approach for transforming your challenges into opportunities CHEMICALS AND REFINING ABB in chemicals and refining A proven approach for transforming your challenges into opportunities 2 ABB in Chemicals and Refining A proven approach for transforming your challenges

More information

Dr. Wilhelm Binder Day

Dr. Wilhelm Binder Day Dr. Wilhelm Binder Day Presentation Amsterdam, Monday 4 October 2010 Villingen, Thursday 7 October 2010 2 Today's presentation covers the automotive market outlook, trends for the industry, and innovation

More information

Meeting the Future of Combustion Engines

Meeting the Future of Combustion Engines CALL FOR PAPERS 19 CONGRESS VANCOUVER, JUNE 10-14, 2019 Meeting the Future of Combustion Engines 29th CIMAC WORLD CONGRESS Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction

More information

Fuel Cells and Hydrogen 2 Joint Undertaking (FCH 2 JU) Frequently Asked Questions

Fuel Cells and Hydrogen 2 Joint Undertaking (FCH 2 JU) Frequently Asked Questions Fuel Cells and Hydrogen 2 Joint Undertaking (FCH 2 JU) Frequently Asked Questions Background information: The Fuel Cells and Hydrogen Joint Undertaking was established in 2008-2013, as the first publicprivate

More information

Press release (blocking period: , 6:00) Industry Study. E-Mobility 2019: An International Comparison of Important Automotive Markets.

Press release (blocking period: , 6:00) Industry Study. E-Mobility 2019: An International Comparison of Important Automotive Markets. Press release (blocking period: 17.1.2019, 6:00) Industry Study E-Mobility 2019: An International Comparison of Important Automotive Markets. Consolidated sales trends for full-year 2018 and forecast for

More information

High efficient electric motors with bar windings for serial production

High efficient electric motors with bar windings for serial production High efficient electric motors with bar windings for serial production Dr. Andreas Eilenberger Dipl.-Ing. Roland Hintringer, MBA Dipl.-Ing. Mateo Primorac Dipl.-Ing. David Scherrer all of Miba AG Laakirchen,

More information

How do we make city buses cleaner and more comfortable?

How do we make city buses cleaner and more comfortable? How do we make city buses cleaner and more comfortable? With the intelligent and leading edge ELFA hybrid drive system Answers for industry. Economical, ecological and efficient: The intelligent response

More information

Customised drive solutions

Customised drive solutions Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous

More information

EV ELECTRIFICATION FOR SUSTAINABLE PROFITABILITY

EV ELECTRIFICATION FOR SUSTAINABLE PROFITABILITY EV ELECTRIFICATION FOR SUSTAINABLE PROFITABILITY AGENDA 03 Emobility Experts 05 Think Global Act Local 06 Brand Identity Focus 07 08 Experience Projects Major Deliverables 09 Contact EMOBILITY EXPERTS

More information

Charging Electric Vehicles in the Hanover Region: Toolbased Scenario Analyses. Bachelorarbeit

Charging Electric Vehicles in the Hanover Region: Toolbased Scenario Analyses. Bachelorarbeit Charging Electric Vehicles in the Hanover Region: Toolbased Scenario Analyses Bachelorarbeit zur Erlangung des akademischen Grades Bachelor of Science (B. Sc.) im Studiengang Wirtschaftsingenieur der Fakultät

More information

Reliability is our profession

Reliability is our profession Reliability is our profession Drive components for wind turbines Siemens AG Am Industriepark 2 46562 Voerde Germany Phone +49 2871 92-4 Fax +49 2871 92-2487 E-Mail info@winergy-group.com www.winergy-group.com

More information

Industry Best Practices in Reliability Prediction and Assurance for Power Electronics: Part 1 - Reliability of Power Electronics Components

Industry Best Practices in Reliability Prediction and Assurance for Power Electronics: Part 1 - Reliability of Power Electronics Components Industry Best Practices in Reliability Prediction and Assurance for Power Electronics: Part 1 - Reliability of Power Electronics Components NAME AND AFFILIATION OF THE AUTHORS Eckhard Wolfgang, ECPE e.v.

More information

2.1 Automotive OEM. Matthias Zink CEO Automotive OEM. September 20, 2018 Capital Markets Day 2018 Berlin

2.1 Automotive OEM. Matthias Zink CEO Automotive OEM. September 20, 2018 Capital Markets Day 2018 Berlin 2.1 Automotive OEM Matthias Zink CEO Automotive OEM Capital Markets Day 2018 Berlin Disclaimer This presentation contains forward-looking statements. The words "anticipate", "assume", "believe", "estimate",

More information

Electric Machines Roadmap. Updated by the Advanced Propulsion Centre in collaboration with and on behalf of the Automotive Council

Electric Machines Roadmap. Updated by the Advanced Propulsion Centre in collaboration with and on behalf of the Automotive Council Electric Machines Roadmap Updated by the Advanced Propulsion Centre in collaboration with and on behalf of the Automotive Council Executive summary Electric machines 2013 roadmap focused on a number of

More information

setting a course 6 9 september 2016 hamburg a new dedicated exhibit area at SMM: the leading international maritime trade fair hamburg

setting a course 6 9 september 2016 hamburg a new dedicated exhibit area at SMM: the leading international maritime trade fair hamburg smm-hamburg.com the leading international maritime trade fair 53 33 47 N, 9 58 33 E hamburg a new dedicated exhibit area at SMM: alternative marine propulsion setting a course 6 9 september 2016 hamburg

More information

Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model.

Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model. Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model. Mike Dempsey Optimised Engineering Design Conference 2016 Claytex Services Limited Software, Consultancy, Training

More information

MacAuto Electric Machines and Vehicle Drive Systems Colloquium

MacAuto Electric Machines and Vehicle Drive Systems Colloquium MacAuto Electric Machines and Vehicle Drive Systems Colloquium 19 th September 2014 Supported by the IET Toronto Local Network and IEEE Hamilton Power Chapter Technical presentations will start at 13:00

More information

Green Mobility Technology Roadmap

Green Mobility Technology Roadmap Green Mobility Technology Roadmap Prof. Dr.-Ing. Horst E. Friedrich Institute of Vehicle Concepts German Aerospace Center (DLR) SCCER-Mobility 1st Annual Conference at ETH Zürich 11 th September 2014 www.dlr.de

More information

China International Automotive Congress Vehicle concepts, tailor made for e-propulsion. Shenyang, 13. September 2009

China International Automotive Congress Vehicle concepts, tailor made for e-propulsion. Shenyang, 13. September 2009 China International Automotive Congress 2009 Vehicle concepts, tailor made for e-propulsion Shenyang, 13. September 2009 Prof. Dr.-Ing. habil. J.-W. Biermann Dipl.-Ing. Bastian Hartmann Institut für Kraftfahrzeuge

More information

E-DRIVE: HIGHLY INTEGRATED AND HIGH EFFICIENT

E-DRIVE: HIGHLY INTEGRATED AND HIGH EFFICIENT E-DRIVE: HIGHLY INTEGRATED AND HIGH EFFICIENT Korea EV Engineering & Testing Exhibition Roger Perthen AVL List GmbH (Headquarters) KEY ASPECTS FOR BATTERY ELECTRIC VEHICLES (BEVs) E-DRIVE: AFFORDABLE -

More information

HORIBA CONCEPT EUROPE 2018 CONference for Combustion Emissions Particulates and Testing. DATE March 22 nd - 23 rd, 2018 LOCATION.

HORIBA CONCEPT EUROPE 2018 CONference for Combustion Emissions Particulates and Testing. DATE March 22 nd - 23 rd, 2018 LOCATION. HORIBA CONCEPT EUROPE 2018 CONference for Combustion Emissions Particulates and Testing DATE March 22 nd - 23 rd, 2018 LOCATION TOPICS Dresden, Germany Future Emission Requirements and Legislation Testing

More information

PwC Autofacts. The Transformation of the Automotive Value Chain.

PwC Autofacts. The Transformation of the Automotive Value Chain. www.pwc.de The Transformation of the Automotive Value Chain Research results on how the automotive transformation will impact value add October 18 DON T PANIC: The automotive transformation will bring

More information

Global Perspectives of ITS

Global Perspectives of ITS ITU-T WORKSHOP ICTs: Building the Green City of the Future United Nations Pavilion, EXPO-2010-14 May 2010, Shanghai, China Building Sustainable Green Smart City of the Future enabled by ICT: Global Perspectives

More information

SEMINAR PROGRAM ICM INTERNATIONAL CONGRESS CENTER MÜNCHEN 13 TH SEMINAR POWER ELECTRONICS FOR PHOTOVOLTAICS AND BATTERY SYSTEMS

SEMINAR PROGRAM ICM INTERNATIONAL CONGRESS CENTER MÜNCHEN 13 TH SEMINAR POWER ELECTRONICS FOR PHOTOVOLTAICS AND BATTERY SYSTEMS SEMINAR PROGRAM ICM INTERNATIONAL CONGRESS CENTER MÜNCHEN 13 TH SEMINAR POWER ELECTRONICS FOR PHOTOVOLTAICS AND BATTERY SYSTEMS POWER ELECTRONICS SEMINAR PROGRAM CHAIRMAN 2018 Prof. Dr.-Ing. Bruno Burger

More information

About LMC Automotive. LMC Automotive the company. Global Car & Truck Forecast. Automotive Production Forecasts

About LMC Automotive. LMC Automotive the company. Global Car & Truck Forecast. Automotive Production Forecasts About LMC Automotive LMC Automotive the company LMC Automotive is a market leader in the provision of automotive intelligence and forecasts to an extensive client base of car and truck makers, component

More information

Intelligent Balancing Solutions

Intelligent Balancing Solutions Intelligent Balancing Solutions Smooth running brought to the point. Measuring and Balancing Technologies from Hofmann In every vehicle on the road, on rails, in the air, and on water a large number of

More information

Closed Size: 194x197mm Open Size: 388x197mm SOLAR DECATHLON MIDDLE EAST DUBAI The Solar Decathlon Middle East s Organising Partners

Closed Size: 194x197mm Open Size: 388x197mm SOLAR DECATHLON MIDDLE EAST DUBAI The Solar Decathlon Middle East s Organising Partners Closed Size: 194x197mm Open Size: 388x197mm SOLAR DECATHLON MIDDLE EAST DUBAI 2018 The Solar Decathlon Middle East s Organising Partners SOLAR DECATHLON MIDDLE EAST www.solardecathlonme.com 1 What is the

More information

INNOVATION INSIDE. SENSORS & TPMS COMPONENTS FLUID CONTROL & HIGHLY ENGINEERED VALVES TIRE HARDWARE, REPAIR & AIR ACCESSORIES

INNOVATION INSIDE. SENSORS & TPMS COMPONENTS FLUID CONTROL & HIGHLY ENGINEERED VALVES TIRE HARDWARE, REPAIR & AIR ACCESSORIES INNOVATION INSIDE. For automotive and industrial leaders whose reputations ride on reliability, Schrader is the valve and sensing technology pioneer that delivers innovative solutions they can trust because

More information

PRESS RELEASE. Significant fuel savings and rapid payback shown for rail flywheel hybrid technology. 16 June 2015

PRESS RELEASE. Significant fuel savings and rapid payback shown for rail flywheel hybrid technology. 16 June 2015 PRESS RELEASE 16 June 2015 Significant fuel savings and rapid payback shown for rail flywheel hybrid technology Research and development conducted by Ricardo, Artemis Intelligent Power and Bombardier Transportation

More information

Motors and Gearboxes for Material Handling. Innovative Energy efficient Reliable

Motors and Gearboxes for Material Handling. Innovative Energy efficient Reliable Motors and Gearboxes for Material Handling Innovative Energy efficient Reliable Reliability In All Areas ABM Greiffenberger develops and manufactures cutting edge drive solutions in highest quality. Individual

More information

The Aachen Approach on E-Mobility

The Aachen Approach on E-Mobility The Aachen Approach on E-Mobility Jan Ole Hansen Sao Paulo, October 2017 Production Engineering at RWTH Aachen University Founded in 1870 One of only 11 Elite Universities Highest third-party funds in

More information

SUSTAINABILITY BMW GROUP EDIE SUSTAINABILITY LEADERS FORUM 2017, 26TH JANUARY 2017

SUSTAINABILITY BMW GROUP EDIE SUSTAINABILITY LEADERS FORUM 2017, 26TH JANUARY 2017 SUSTAINABILITY INNOVATION @ BMW GROUP EDIE SUSTAINABILITY LEADERS FORUM 2017, 26TH JANUARY 2017 Ursula Mathar Sustainability and environmental protection BMW Group business fields. Automobiles Motorcycles

More information

Technology Trends in emotor Components for Automotive Applications. Mateo Primorac , Miba AG

Technology Trends in emotor Components for Automotive Applications. Mateo Primorac , Miba AG Technology Trends in emotor Components for Automotive Applications Mateo Primorac 09.11.2017, Miba AG Introduction Relevant market shares of electric vehicles about to happen in near future Market share

More information

The 15th Shanghai International Automobile Industry Exhibition is. The 15th Shanghai International Automobile Industry Exhibition (Auto

The 15th Shanghai International Automobile Industry Exhibition is. The 15th Shanghai International Automobile Industry Exhibition (Auto The 15th Shanghai International Automobile Industry Exhibition is finished successfully The 15th Shanghai International Automobile Industry Exhibition (Auto Shanghai 2013) with the tagline "Innovation

More information

Automotive Electronics/Connectivity/IoT/Smart City Track

Automotive Electronics/Connectivity/IoT/Smart City Track Automotive Electronics/Connectivity/IoT/Smart City Track The Automobile Electronics Sessions explore and investigate the ever-growing world of automobile electronics that affect virtually every aspect

More information

2018 ANSYS, Inc. ANSYS.COM

2018 ANSYS, Inc. ANSYS.COM Dramatic innovations in electrical systems are underway to increase the energy efficiency of the millions of industrial motors that power fans, pumps and compressors used around the globe. The targeted

More information

Magna Steyr Engineering

Magna Steyr Engineering Automobile and transportation Product Simcenter Leading partner for OEMs implements model-based systems engineering for hybrid vehicle development Business challenges Improve vehicle fuel efficiency in

More information

FORD AND AZURE DYNAMICS COLLABORATE ON TRANSIT CONNECT ELECTRIC FOR EUROPE

FORD AND AZURE DYNAMICS COLLABORATE ON TRANSIT CONNECT ELECTRIC FOR EUROPE PERSINFORMATIE FORD AND AZURE DYNAMICS COLLABORATE ON TRANSIT CONNECT ELECTRIC FOR EUROPE Ford Motor Company will collaborate with Azure Dynamics to begin delivering the Transit Connect Electric to European

More information

BMW GROUP DIALOGUE. HANGZHOU 2017 TAKE AWAYS.

BMW GROUP DIALOGUE. HANGZHOU 2017 TAKE AWAYS. BMW GROUP DIALOGUE. HANGZHOU 2017 TAKE AWAYS. BMW GROUP DIALOGUE. CONTENT. A B C Executive Summary: Top Stakeholder Expert Perceptions & Recommendations from Hangzhou Background: Mobility in Hangzhou 2017,

More information

Film title: Key Technology Battery A Global Challenge for German Engineering Companies

Film title: Key Technology Battery A Global Challenge for German Engineering Companies Film title: Key Technology Battery A Global Challenge for German Engineering Companies Length: 14:28 Format: 1080-i/50 : Project No.: 11_0048 Webbox-ID: 318 TC Text 00.01 Resource depletion and key climate

More information

Automotive Forum&Expo AUTOMOTIVE FORUM: AUTOMOTIVE CONFERENCE AUTOMOTIVE MEETINGS AUTOMOTIVE CARRIER DAYS AUTOMOTIVE EXPO AUTOMOTIVE FUTURE

Automotive Forum&Expo AUTOMOTIVE FORUM: AUTOMOTIVE CONFERENCE AUTOMOTIVE MEETINGS AUTOMOTIVE CARRIER DAYS AUTOMOTIVE EXPO AUTOMOTIVE FUTURE Automotive Forum&Expo Sofia 2018 AUTOMOTIVE FORUM: AUTOMOTIVE CONFERENCE AUTOMOTIVE MEETINGS AUTOMOTIVE CARRIER DAYS AUTOMOTIVE EXPO AUTOMOTIVE FUTURE 01 Automotive Forum & Expo Sofia 2018 Automotive Forum

More information

Marketable solutions for climate-friendly electric mobility

Marketable solutions for climate-friendly electric mobility Marketable solutions for climate-friendly electric mobility Renewably mobile CLEAN Electric vehicles and solar or wind power are ideal partners mobile and emission-free. With vehicular traffic on the increase

More information

Power Electronics and Drives (PED)

Power Electronics and Drives (PED) Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters

More information

How to address the electromobility ecosystem?

How to address the electromobility ecosystem? Berlin Extension Innovation Ecosystems and Sustainable Mobility Wednesday, September 21, 2016 How to address the electromobility ecosystem? Carole DONADA 1 Agenda With a chair on Electromobility Emergence

More information

BMW GROUP AND THE FUTURE OF MOBILITY. AUTOMOBILITY MODULES FOR VOCATIONAL EDUCATION AND TRAINING.

BMW GROUP AND THE FUTURE OF MOBILITY. AUTOMOBILITY MODULES FOR VOCATIONAL EDUCATION AND TRAINING. Thiemo Schalk. Steering Government and External Affairs, Sustainability Communications / Urban Mobility. October 7th 2015. BMW GROUP AND THE FUTURE OF MOBILITY. AUTOMOBILITY MODULES FOR VOCATIONAL EDUCATION

More information

InnoTrans SEPTEMBER BERLIN

InnoTrans SEPTEMBER BERLIN InnoTrans 2016 20 23 SEPTEMBER BERLIN International Trade Fair for Transport Technology Innovative Components Vehicles Systems innotrans.com English Increase in the number of trade visitors 2014 133,595

More information

POWER-GEN Africa 2012

POWER-GEN Africa 2012 Johannesburg, November 6 8 POWER-GEN Africa 2012 Driving the new electricity era together Answers for energy. Get in touch with the Siemens experts at exhibition booth F24 We kindly invite you to attend

More information

BMW Group Investor Relations.

BMW Group Investor Relations. Capital Markets Day China 2010 Beijing September 16, 2010 - Please check against delivery - Statement by Dr. Friedrich Eichiner Member of the Board of Management of BMW AG, Finance Capital Markets Day

More information

AGENDA: DAY 1 19 April (Tuesday)

AGENDA: DAY 1 19 April (Tuesday) AGENDA: DAY 1 19 April (Tuesday) TIME PRESENTATION COMPANY 8:00-9:00 Registration 9:00-9:30 Introduction & Version 12.1 Overview ThermoAnalytics, Inc. 9:30-10:00 Automotive Cabin Solar Loading Impact for

More information