RIDER AUTOSCRUBBER. Parts List Models: (28D), (34D OBC), (34D) (28B), (28B OBC), (28D OBC)

Transcription

1 RIDER AUTOSCRUBBER Parts List Models: (8D), (34D OBC), (34D) (8B), (8B OBC), (8D OBC) Form No /0 revised /07 REV I

2 PARTS LIST 5/04 GENERAL VIEW Item Ref. No. Qty Description Chassis System Control System 3 Electrical System 4 Onboard Charger Assembly 5 Recovery System 6 Scrub System-8 BOOST 7 Scrub System-8D 8 Scrub System-34D 9 Scrub System BOOST Skirt Assemblies 0 Scrub System 8-34 Disk Skirt Assemblies Solution System Squeegee Mount System 3 Squeegee Assy ii Focus II Rider /0

3 7/05 TABLE OF CONTENTS DESCRIPTION PAGE Chassis System Control System Decal System Electrical System Onboard Charger Assembly Recovery System Scrub System-8 BOOST Scrub System-8 BOOST Scrub System-8D Scrub System-34D Scrub System - BOOST Skirt Assemblies Scrub System Disk Skirt Assemblies Solution System Squeegee Mount System Squeegee Assy-8 Inch Squeegee Assy-34 Inch... 3 Ladder Diagram Ladder Diagram Ladder Diagram- [After June 04] Ladder Diagram- [After June 04] Optional Kits & Accessories Brush Selector Guide-Disk... 4 Pad Selector Guide... 4 Squeegee Blade Selector Guide WHEN ORDERING PARTS PARTS LIST * Use the part numbers from the Ref. No. columns in this parts list. If the Ref. No. column is blank; look under the Kit column to identify which kit contains the part in question, then use the kit callout, for example K, to find the Ref. No. for that kit. Kit Item Ref. No. Qty Description K 6 Washer Flat 3/6 Zinc Plat K Screw-BHS-Brass-0-3x3/8-MS K 3 3 Washer EPDM 7/3 X / Chain-Cover Caster Swivel 4 Gray Non MA K 6 Nut, Hex Nyl Loc 0-4 K 7 3 Scr- Hex SS /4-0 X.75 K 8 6 Scr, Hex Hd Loc /4-0 x.50 K 9 3 Wsh, Flt SS.60 X.000 X Solution Tank Hinge Plate K Kit-Hardware Solution Tank * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No. 6/ Focus II Rider

4 PARTS LIST /07 CHASSIS SYSTEM ALUMINUM CASTING (NOT AVAILABLE) GEAR BOX (NOT AVAILABLE) BRACKET(NOT AVAILABLE) 7b 7e 7g i 7a 7f 7c 7h 7d SEE NOTE Focus II Rider /0

5 /07 PARTS LIST CHASSIS SYSTEM Kit Item Ref. No. Qty Description K4 Scr-Hex 5/6-8 X.88 K Scr, Soc Hd 5/6-8 X.00 K 3 Nut, Hex Nyl Loc-Thin K 4 Scr Pan Phil SS M4-.07 x 40mm K4 5 Scr, Hex Thd To Hd 5/6-8 X 3.50 K6 6 4 Scr, Hex Hd Loc K 7 Nut, Hex Nyl Loc-Thin Scr, Hex Loc M0-.5 X 0mm K 9 4 Scr-Hex M0-.5 X 40mm 0 Intentionally Omitted K3 Wsh, Int Shprf #0 K3 3 Scr, Hex Thd Form 0-4 X.38 K4 3 Wsh, Flt Std 5/6 K4 4 Wsh, Flt.344 X.938 X.5 5# Chassis Weldment TSB-FC K5, K6 6 Bearing Cup K5, K6 7 Bearing Cone K5, K6 8 Seal, Shaft K 9 Bushing K6 0 Block, Bearing Wsh, Flt.406 X.5 X.875 K5, K6 Bearing Ball Wheel TSB-FC Trim Edge Horn/Backup Alarm (H) K 6 Clamp-P Motor / Drive Wheel (M) 7a Kit, Drive Motor Tire W/Hub (for ) 7b Replacement Motor, Drive Motor (for ) 7c Tire (for ) NOTE 7d Carbon Brush Kit (for ) 7e Brake, Electromagnetic (for ) (Y) 7f Tire Puller Kit (for ) 7g Drive Motor Cover (for ) 7h Kit, Brake Lever (for ) 7i Cover, Gearbox Motor (for ) K 8 Spindle Weldt K 9 Plate, Steering K3 30 Ground Chain K4 3 Nut, Hex Nyl Loc 5/6-8 K4 3 Clamp-P K4 33 Nut, Hex Jam 5/6-8 34# Nut, Hex Nyl Loc SS 5/6-8 35# Screw, Hex Loc Hex 5/6-8 X.75 36# Bracket Service Kits K 5647 Plate Kit-Steering K 5647 Spindle Kit-Motor K Chain Kit-Ground K Hardware Kit-Chassis System K Bearing Kit-Spindle K Bearing Block Assembly # = Revised or new since last update NOTE : Puller Kit is required in order to replace the tire only. 6/ Focus II Rider 3

6 PARTS LIST /05 CONTROL SYSTEM Focus II Rider /0

7 3/06 PARTS LIST CONTROL SYSTEM Kit Item Ref. No. Qty Description K Wsh-Flt SAE / K6 4 Wsh, Flt SAE 3/8 K5 3 Scr, Soc Set Loc 5/6-8 X.5 K7 4 3 Wsh, Flt SAE /4 K7 5 3 Scr-Pan Phil /4-0 X.50 K4 6 3 Scr-Pan Phil /4-0 X.75 K 7 Nut, Hex Nyl Loc-Thin K5 8 Scr, Soc Set Loc 3/8-6 X.38 K6 9 4 Scr, Hex Thd To Hd M0-.5 X 5mm K 0 Key, Wdf.6 X.9 K5 3 Key, Wdf.75 X.9 K7,K 3 Scr-Hex 5/6-8 x.5 K5 3 Scr, Pan Phil Thd Form 8-3 X.38 K5 4 4 Scr, Pan Phil Thd Form /4-0 X.50 K3,K8 5 5 Scr-Truss Phil Blk 0-4x.75 K5 6 Bushing Seat Panel Weldt K3 8 User Interface Panel Assembly (A) NOTE K8 UI Panel Assy-BOOST (A) NOTE Steering Column Weldt Shroud-Column K4 Foot Pedal Assy K5 Bearing, Flange Key Switch Assembly (S) K5 4 Collar, Shaft Chain, Roller Universal Joint K5 7 Sprocket Steering Wheel Shaft, Lower Steering K 30 Shaft, Upper Steering K7,K 3 Knob, 5/6 Stud K Switch (S) K 33 Seat NOTE Tie, Cable K Clip, Conduit K7,K 36 3 Flanged Bushing Seat K3,K Washer-Black Nylon-6/6 Service Kits K Seat Kit K Shaft Kit-Upper Steering K User Interface Panel Kit NOTE K UI Panel Interface Kit-BOOST NOTE K Foot Pedal Kit K Hardware Kit-Steering Column K Hardware Kit-Steering Mount K Hardware Kit-Seat NOTE : Used on all models except BOOST. NOTE : Used on BOOST models only. NOTE 3: Seat (steel seat pan) has been replaced by Seat (plastic seat pan) in production. Please order Seat Kit when replacing Seat / Focus II Rider 5

8 PARTS LIST 7/0 DECAL SYSTEM Focus II Rider /0

9 7/0 PARTS LIST DECAL SYSTEM Kit Item Ref. No. Qty Description K Decal, Caution NA Serial Plate Data Table K 3 Decal, Circuit Breaker K 4 Decal-Battery Wiring K 5 Decal-Error Codes K 6 Decal Clarke K 7 Front Decal Focus II Service Kit K 5643 Decal Kit-Focus Rider 6/ Focus II Rider 7

10 PARTS LIST 0/0 ELECTRICAL SYSTEM Focus II Rider /0

11 /05 PARTS LIST ELECTRICAL SYSTEM Kit Item Ref. No. Qty Description K5 8 Cable Tie K6 3 Wsh, Flt SAE 5/6 K6 3 Scr-Pan Phil 8-3 X.6 K6 4 3 Scr-Pan Phil /4-0 X.75 K 5 3 Nut, Hex W/ Shprf /4-0 K6 6 3 Scr-Hex 5/6-8 X.75 K6 7 4 Nut, Hex Nyl Loc-Thin /4-0 K3 8 Scr-Pan Phil /4-0 X.75 K6 9 3 Wsh-Flt.8 x.875 x.036 K6 0 Scr Hex Thd Form 0-4x.38 K3 Wsh, Flt SS.60 X.000 X.074 K3 Spacer, Phenolic [3] Harness-Main Panel-Electrical Panel-Switch Harness-Power (machine) Controller-Speed (A) Gasket-.5 X.50 X Gasket-.5 X.50 X 3.50 [0] Harness-Traction K5 8 Boot-Battery Post K Disconnect, Emergency (S4) K5 3 3 Cable,Battery K 4 Fuse, 50 Amp (F) Contactor, 4 VDC (K) (Brush) K Circuit Breaker, 70 Amp (CB) (Traverse) K4 7 Boot, Reset Button K 8 3 Electrical Mount K Circuit Breaker, 0 Amp (CB) (Key Switch) Connector Assy (Battery) Contactor 4V, 00 Amp (K) (Vacuum) K3 3 Prop Rod, Seat K 33 Emergency Button Guard K 34 3 Stud, / Cable, Jumper [ ] Rectifier Assembly Service Kits K E-Stop Kit K Standoff and Breaker Kit K Prop Rod Kit K Circuit Breaker Kit K Battery Cable Kit K Hardware Kit-Elec System [ ] = Not Shown 6/ Focus II Rider 9

12 PARTS LIST 0/04 ONBOARD CHARGER ASSEMBLY Focus II Rider /0

13 /07 PARTS LIST ONBOARD CHARGER ASSEMBLY Item Ref. No. Qty Description Scr-Hex /4-0 X Wsh, Flt Std / Scr-Hex /4-0 X Nut, Hex Nyl Loc / Adapter-Charger Deltaq Power Charger-Onboard 4vdc 650w NOTE, TSB-FC Sensor-Deltaq Charge Temp Cord-AC Nema Iec30 - Deltaq Adapter-Interlock Bracket-Pbc Mount Clamp-P 6598A Bracket, Cord Wrap Tye Rap Harness-Charger Strain Relief Kit NOTE : The onboard battery charger has been replaced in production by If you need to replace please order Onboard Charger Kit / Focus II Rider

14 PARTS LIST 4/04 RECOVERY SYSTEM Focus II Rider /0

15 /07 PARTS LIST Kit Item Ref. No. Qty Description Gasket-Air Duct K3 Clamp, Plastic K Gasket, Vacuum Duct K3, K4 4 9 Scr-Pan Phil 0-4 X.50 K4 5 4 Wsh, Flt Std #0 K4 6 Scr, Pan Phil SS /4-0 X 75 K4 7 Scr-Pan Phil 0-4 X.88 K3 8 Clamp-Hose K4 9 Wsh-Flt SAE SS # Tank-Recovery Cover-Recovery Tank Drain Hose Assy-.5- NOTE Recovery Hose Assy Gasket-Recovery Tank K Seal Assy-Vac Fan Float Duct Shroud, Vac Motor K 8 3 Mount, Vibration K 9 Foam Tube Assembly K 0 Cage, Float K Ball, Float K Motor, Vac 4VDC (M5) [ ] Carbon Brush Set of (for Vac Motor) K3 3 Clamp- Hose SAE #3 K 4 Tie, Cable Hinge Clamp Strainer Basket Cover, Debris Service Kits K Kit-Float Ball Cage K Vac Motor Kit K Hose Clamp Kit-Drain K Hardware Kit-Recovery System DELETED [ ] = Not Shown RECOVERY SYSTEM NOTE : Drain hose replaced hose If you are replacing order drain hose kit / Focus II Rider 3

16 PARTS LIST /03 SCRUB SYSTEM-8 BOOST FRONT 5 5C 5B 5D 5E 5J H 5F 5A 5G 4 Focus II Rider /0

17 3/06 PARTS LIST SCRUB SYSTEM-8 BOOST - Kit Item Ref. No. Qty Description K3, K6 Wsh-Flt SAE / K0 Scr-Hex 3/8-6 X.75 K0 3 Nut, Hex Nyl Loc-Thin K0,K3,K6 4 3 Pin, Cotter Hair K4 5 3 Scr Hex 5/6-8 X.75 K0 6 Pin, Cotter Hair.095 X Ring, Ret Ext Type E 0.50 Dia K3, K6 8 Scr, Hex Loc M-.75 X 35mm Nut, Hex Jam SS M Scr, Hex Thd To Hd SS M-.75 X 70mm K0 Pin, Ring.50 X.63 K3, K6 Pin, Ring.500 X.8 K0 3 Pin- Clevis SS.375 X Left Skirt Assy NOTE Right Skirt Assy NOTE K4 6 Roller Brkt Weldt-8 [ ] Connector-Adaptor K3 8 Bushing.50 x.6 x.7 K3, K6 9 Bushing Knob - M-.75 Thru Wheel, Roller K3, K6 Bearing, Flange K3 3 Deck Linkage, Weldment K0 4 Yoke, Actuator Lift Actuator Assembly 5A Scr, Hex Thd Form /4-0 X.38 5B Scr, Pan Phil Thd Form /4-0 X.50 5C Actuator, Motor (M4) 5D Spring Housing Guide 5E Compression Spring 5F 5646 Housing Spring 5G Nut Retainer 5H Nut Retainer 5J Compression Spring Knob Pin K 8 Clamp- Hose SAE # BOOST Deck Assy NOTE K 30 Hose, Solution Decal, No Step BOOST Label K4 33 Bearing, Flange Service Kits K Hardware Kit-Actuator K Lift Kit-Deck K Roller Mount Kit-RT 8D K Hose Kit-Solution Boost K Hardware Kit-Deck Linkage [ ] = Not Shown NOTE : See Scrub System - BOOST Skirt Assemblies. NOTE : See Scrub System-8 BOOST - 6/ Focus II Rider 5

18 PARTS LIST /03 SCRUB SYSTEM-8 BOOST Focus II Rider /0

19 7/04 PARTS LIST Kit Item Ref. No. Qty Description Scr-Flt Soc /4-0 X Scr-Pan Phil 0-4 X Scr-Hex Loc SS 5/6-8 X.88 K 4 4 Shoulder Bolt - BOOST Plate Weldment Rod-Up Stop 7 Intentionally Omitted K 8 FlexPlate-Boost 8 Machined Up Stop Mount 0 87A 3 Nut, /4-0 Hex ESNA Clamp, Manifold K, K3 Pin, Roll K, K 3 8 Washer, /4 Starlock, External Washer, 3/8 Lock K 5 Washer, Lock / Pad, Red, 8 (case of 5) NOTE Boost Plate Weldt Manifold Assy K, K 9 8 Isolator Duro /4-0 K, K Shield Boost Bearing K, K 8 Isolator-40 Duro /4-0 K Plate Driver Stud Stablizer Short 4 Intentionally Omitted Motor 4VDC (M8) [ ] Carbon Brush Set of 4 K A Bearing K 7 Retainer, Eccentric K, K3 8 Eccentric K 9 Retainer, Bearing 30 Intentionally Omitted A Screw 3/8-4 X Hex Head K, K 3 6 Nut, Serrated Flange K 33 3 Screw, 0-3 X.50 P.H A 3 Screw, /4-0 X / P.H. K 35 Scr-Hex /4-0 X Scr, Hex Thd Form /4-0 X.38 Service Kits K Kit Flex Plate BOOST 8LG K Kit Isolator K Kit Eccentric & Shield [ ] = Not Shown SCRUB SYSTEM-8 BOOST - NOTE : See the page at the end of this manual labeled PAD SELECTOR GUIDE-BOOST for additional pads and suggested applications. 6/ Focus II Rider 7

20 PARTS LIST /03 SCRUB SYSTEM-8D 46B 46D 46A 46G C 37 46F E C 53 53B 53H 53D 53E 53J 53A FRONT 53F 30 53G Rotation Focus II Rider /0

21 /03 PARTS LIST SCRUB SYSTEM-8D Kit Item Ref. No. Qty Description K3, K6 Wsh-Flt SAE / K4 Scr-Pan Phil 0-4 X.75 K4 3 3 Scr-Hex 5/6-8 X.75 K0 4 Scr-Hex 3/8-6 X.75 K4 5 3 Nut, Hex Nyl Loc 5/6-8 K0 6 Nut, Hex Nyl Loc-Thin K0,K3,K6 7 3 Pin, Cotter Hair K4 8 Scr-Hex SS K0 9 Pin, Cotter Hair.095 X.375 K 0 8 Scr, Hex SS M6- X mm K4 Ring, Ret Ext Type E 0.50 Dia K9 Scr-Hex Loc SS 5/6-8 X.88 K3, K6 3 Scr, Hex Loc M-.75 X 35mm K, K4 4 6 Nut, Hex Nyl Loc SS M6- K 5 5 Scr, Hex Thd To Hd SS M6- X 0mm K 6 Screw, Gimbal Mount K 7 Key, Square.5 X Nut, Hex Jam SS M Scr, Hex Thd To Hd SS M-.75 X 70mm K0 0 Pin, Ring.50 X.63 K4 Scr, Hex Thd To Hd SS M6- X 5mm K4 Wsh-Flt SS.33 X.00 X.060 K3, K6 3 Pin, Ring.500 X.8 K0 4 Pin- Clevis SS.375 X.50 K 5 Scr, Pan Phil Thd Form 0-4 X.50 K9 6 Wsh, Flt Harden.344 x.000 x.0/ Decal, No Step K 8 Shaft-Hub Mount Left Skirt Assy-8D NOTE Right Skirt Assy-8-34D NOTE K4 3 Roller Brkt Weldt-8 K 3 Clamp- Hose SAE # K 33 Hose, Spiral.500 K 34 Tee, Barb 3/4 X / X / K 35 Hose K4 36 Pin K 37 Clamp-P K3, K6 38 Bushing Knob - M-.75 Thru K 40 Gimbal-Collar Assembly Kit Item Ref. No. Qty Description K4 4 Wheel, Roller K4 4 Clamp,.5 Hose Support K3, K6 43 Bearing, Flange Tie, Cable Scrub Deck, Cast K9 46 Motor Gearbox Assy (M7) (M9) 46A Gearbox 46B Bearing (Brush End) 46C Bearing (Fan End) 46D Carbon Brush 46E Brush Motor Cover 46F Motor Fan 46G Key, 6mm Square K3 47 Deck Linkage, Weldt Blade, Front 8 (Gum) Rod-Up Stop K0 50 Yoke, Actuator Up Stop Mount K 5 Bracket, Motor Lift Actuator Assembly 53A Scr, Hex Thd Form /4-0 X.38 53B Scr, Pan Phil Thd Form /4-0 X.50 53C Actuator, Motor (M4) 53D Spring Housing Guide 53E Compression Spring 53F 5646 Housing Spring 53G Nut Retainer 53H Nut Retainer 53J Compression Spring Knob K4 55 Bearing, Flange Service Kits K 5648 Gimbal Kit K 5648 Shaft Kit-Hub Mount K Roller Kit-L/R K Motor Kit-Brush K Hardware Kit-Actuator K 5649 Hardware Kit-Motor Brkt K Manifold Kit-Solution 8D K Lift Kit-Deck K Roller Mount Kit-RT 8D K Hardware Kit-8D Scrub System K Hardware Kit-Deck Linkage [ ] = Not Shown NOTE : See Scrub System Disk Skirt Assemblies. 6/ Focus II Rider 9

22 PARTS LIST /03 SCRUB SYSTEM-34D 45A 45G 45C 45F 45B 45D 45E FRONT C 53B 53D 53E 53J Rotation 53H 53A 53G 53F 0 Focus II Rider /0

23 3/06 PARTS LIST SCRUB SYSTEM-34D Kit Item Ref. No. Qty Description K3, K6 Wsh-Flt SAE / K5 Scr-Pan Phil 0-4 X.75 K3 3 3 Scr-Hex 5/6-8 X.75 K0 4 Scr-Hex 3/8-6 X.75 K3 5 3 Nut, Hex Nyl Loc 5/6-8 K0 6 Nut, Hex Nyl Loc-Thin K0,K3,K6 7 3 Pin, Cotter Hair K5 8 Scr-Hex SS K0 9 Pin, Cotter Hair.095 X.375 K 0 8 Scr, Hex SS M6- X mm K5 7 Rivet, Nylon Tree Push-In (.5) K4 Ring, Ret Ext Type E 0.50 Dia K9 3 Scr-Hex Loc SS 5/6-8 X.88 K3, K6 4 Scr, Hex Loc M-.75 X 35mm K, K5 5 9 Nut, Hex Nyl Loc SS M6- K, K5 6 8 Scr, Hex Thd To Hd SS M6- X 0mm K 7 Key, Square.5 X.44 K5 8 4 Nut, Hex Jam SS M-.75 K0 9 Pin, Ring.50 X.63 K5 0 Scr, Hex Thd To Hd SS M6- X 5mm K5 Wsh-Flt SS.33 X.00 X.060 K3, K6 Pin, Ring.500 X.8 K0 3 Pin- Clevis SS.375 X.50 K6 4 Scr, Pan Phil Thd Form 0-4 X.50 K9 5 Wsh, Flt Harden.344 x.000 x.0/.35 K5 6 4 Scr, Hex Thd To Hd M-.75 X 5mm Decal, No Step K 8 Shaft-Hub Mount Right Skirt Assy-8-34D NOTE Left Skirt Assy-34D NOTE K3 3 Roller Brkt Weldt-34 K6 3 Clamp- Hose SAE # K6 33 Tee, Barb 3/4 X / X / K 34 Screw, Gimbal Mount K6 35 Clamp-P K3, K6 36 Bushing Knob - M-.75 Thru K 38 Gimbal-Collar Assembly K6 39 Hose, Spiral.500 K4 40 Wheel, Roller Kit Item Ref. No. Qty Description K5 4 Clamp,.5 Hose Support K3, K6 4 Bearing, Flange Tie, Cable Scrub Deck, Cast K9 45 Motor Gearbox Assy (M7) (M9) 45A Gearbox 45B Bearing (Brush End) 45C Bearing (Fan End) 45D Carbon Brush 45E Brush Motor Cover 45F Motor Fan 45G Key, 6mm Square K3 46 Deck Linkage, Weldt K5 47 Blade Front 34 Gum Skirt Bracket, Front Rod-Up Stop K0 50 Yoke, Actuator Up Stop Mount K 5 Bracket, Motor Lift Actuator Assembly 53A Scr, Hex Thd Form /4-0 X.38 53B Scr, Pan Phil Thd Form /4-0 X.50 53C Actuator, Motor (M4) 53D Spring Housing Guide 53E Compression Spring 53F 5646 Housing Spring 53G Nut Retainer 53H Nut Retainer 53J Compression Spring Brush Cover Side Skirt Weldment Knob K4 57 Pin K6 58 Hose K3 59 Bearing, Flange Service Kits K 5648 Gimbal Kit K 5648 Shaft Kit-Hub Mount K Roller Kit-L/R K Motor Kit-Brush K Hardware Kit-Actuator K 5649 Hardware Kit-Motor Brkt K Lift Kit-Deck K Blade Kit-Front 34 Gum w/fast K Manifold Kit-Solution 34 K Roller Mount Kit-RT34D K Hardware Kit-34D Scrub System K Hardware Kit-Deck Linkage [ ] = Not Shown NOTE : See Scrub System Disk Skirt Assemblies. 6/ Focus II Rider

24 PARTS LIST /03 SCRUB SYSTEM - BOOST SKIRT ASSEMBLIES Left Skirt Right Skirt Focus II Rider /0

25 /03 PARTS LIST Kit Item Ref. No. Qty Description Left Skirt Assy (items -6) K 8 Scr-Carriage SS /4-0 X.75 K 8 Nut- Wing Plastic Loc / Lt Skirt Weldt-Boost NOTE 3 K 4 Blade-Skirt Gum Strap Front 8B Lt NOTE Strap Rear 8B Lt NOTE Right Skirt Assy (items 7-) K 7 8 Scr-Carriage SS /4-0 X.75 K 8 8 Nut- Wing Plastic Loc /4-0 K 9 Blade-Skirt Gum Rt Skirt Weldt-Boost NOTE Strap Front 8B Rt NOTE Strap Rear 8B Rt NOTE 6 Service Kits K 5649 Hardware Kit-Skirt NOTE K Blade Kit, Gum NOTE * Blade Kit, PU NOTE * Blade Kit-Red Gum NOTE * = Optional, Not Included SCRUB SYSTE M - BOOST SKIRT ASSEMBLIES NOTE : One Hardware Kit is required per skirt assembly (two per machine). NOTE : Blade Kits include both left and right side deck blades (one per machine). NOTE 3: The design of this part was changed after February 03. If replacing this weldment on a machine built before march of 03 you will also need to order items 5 and 6. NOTE 4: This part is only used on machines built after February 03. Machines built before March 03 used a single strap that ran across the entire length of the blade, the part number for that strap is NOTE 5: The design of this part was changed after February 03. If replacing this weldment on a machine built before march of 03 you will also need to order items and. NOTE 6: This part is only used on machines built after February 03. Machines built before March 03 used a single strap that ran across the entire length of the blade, the part number for that strap is / Focus II Rider 3

26 PARTS LIST /03 SCRUB SYSTEM DISK SKIRT ASSEMBLIES Left Skirt 8D Left Skirt 34D Right Skirt Focus II Rider /0

27 /03 PARTS LIST Kit Item Ref. No. Qty Description 5640 Left Skirt Assy-8D (items -6) K 8 Scr-Carriage SS /4-0 X.75 K 8 Nut- Wing Plastic Loc / Skirt Bkt Weldt-Lt-8D NOTE 3 K 4 Blade-Skirt-8dD34D-Gum Strap Front 8D 34D NOTE Strap Rear 8D 34D NOTE Left Skirt Assy-34D (items 7-) K 7 9 Scr-Carriage SS /4-0 X.75 K 8 9 Nut- Wing Plastic Loc / Skirt Bkt-Lt-34D Weldt NOTE 5 K 0 Blade-Skirt-8D34D-Gum Strap Front 34D Lt NOTE Strap Rear 34D Lt NOTE 6 SCRUB SYSTEM DISK SKIRT ASSEMBLIES 564 Right Skirt Assy-8-34D (R 6 7, 86) (items 3-8) K 3 8 Scr-Carriage SS /4-0 X.75 K 4 8 Nut- Wing Plastic Loc / Skirt Bkt Weldt-Rt-8-34D NOTE 7 K 6 Blade-Skirt-8D34D-Gum Strap Front 8D 34D NOTE Strap Rear 8D 34D NOTE 4 Service Kits K 5649 Hardware Kit-Skirt NOTE K Skirt Kit-8D34D-Gum NOTE * Skirt Kit-8D34D-PU NOTE * Skirt Kit-8D34D-Red Gum NOTE * = Optional, Not Included NOTE : One Hardware Kit is required per skirt assembly (two per machine). NOTE : Blade Kits include both left and right side deck blades (one per machine). NOTE 3: The design of this part was changed after February 03. If replacing this weldment on a machine built before march of 03 you will also need to order items 5 and 6. NOTE 4: This part is only used on machines built after February 03. Machines built before March 03 used a single strap that ran across the entire length of the blade, the part number for that strap is 564. NOTE 5: The design of this part was changed after February 03. If replacing this weldment on a machine built before march of 03 you will also need to order items and. NOTE 6: This part is only used on machines built after February 03. Machines built before March 03 used a single strap that ran across the entire length of the blade, the part number for that strap is NOTE 7: The design of this part was changed after February 03. If replacing this weldment on a machine built before march of 03 you will also need to order items 7 and 8. 6/ Focus II Rider 5

28 PARTS LIST 7/05 SOLUTION SYSTEM To Scrub Deck Focus II Rider /0

29 3/06 PARTS LIST SOLUTION SYSTEM Kit Item Ref. No. Qty Description K Barb K4 Wsh, Flt SAE #0 K, K4 3 4 Scr-Pan Phil 0-4 x.50 K 4 3 Scr-Pan Phil /4-0 x.6 K 5 Rubber Tip-Black K3 6 Grommet K3 7 Hosebarb, 90 Degree Tank-Solution Cover-Electrical K3 0 Tube-PVC.38 x.50 x Gasket-.5 X.50 X K, K 4 Clamp- Hose SAE # K 3 Cap, Pipe GHT Nylon K 4 Hose 7 K 5 Barb Elbow K Solution Filter K 7 Ball Valve K 8 Nipple, Hex 3/ Cap-Spindle Solenoid Valve Assy (L) TSB-FC K Clamp-Hose (Double) / O.D Battery Box K 3 Tee, Special, 3/4 X 3/6 X /NPT K 4 Hose Clip Cap-Extra Vent TSB-FC K 6 Hose, Solution (Flex) Wsh-Flt.8 X.875 X Clamp,.5 Hose Support K 9 Wsh Flt Rubber.65cv80l Clamp P Scr Pan Phil /4-0 X Scr Hex Loc Ss /4-0 X Wsh Int Shprf /4 Service Kits K Hose Kit-Drain K Valve and Filter Kit K Sight Gauge Kit K Hardware Kit-Elec Cover 6/ Focus II Rider 7

30 PARTS LIST SQUEEGEE MOUNT SYSTEM Focus II Rider /0

31 PARTS LIST SQUEEGEE MOUNT SYSTEM Kit Item Ref. No. Qty Description Spacer K4 Nut, Hex Nyl Loc SS /4-0 K4 3 Nut, Hex Nyl Loc SS 5/6-8 K4 4 Scr- Hex SS /4-0 X.00 K4 5 Scr- Hex SS 3/8-6 X Wsh-Flt SAE SS 3/8 K4 7 Wsh-Flt SAE SS 5/ Nut, Hex Nyl Loc 3/ Hose K4 0 Nut, Hex Nyl Loc SS 3/8-6 K, K4 4 Pin, Cotter Hair K Ring, Ret Ext Type E 0.38 Dia K4 3 Ring, Ret Ext Type E 0.50 Dia K4 4 Scr-Hex Thd To Hd SS 5/6-8 X 4.00 K 5 3 Pin-Clevis.375 X.5 K4 6 Wsh-Flt SS.33 X.00 X.060 K4 7 Pin-Clevis.38 X Nut, Hex Jam 3/8-4 K4 9 Nut-Hex Jam SS 5/ Rod End K4 6 Bearing, Flange Bushing.3x.44x.5 K4 3 Washer, Polyurethane Bracket-Squeegee Pivot Weldt Bar Weldment Bracket-Squeegee Mount Weldt K4 7 Knob K 8 Pin K3 9 Wheel K 30 Roller Spring, Extension K 3 Spacer, Squeegee Cable Actuator- Motor 4V (M3) K 34 Cable Assembly Shaft 36 NA Squeegee Assembly (see appropriate Squeegee Assembly page) Service Kits K Cable Kit-Squeegee K Roller Kit-Squeegee K Hardware Kit-Squeegee Bracket [ ] = Not Shown 6/ Focus II Rider 9

32 PARTS LIST SQUEEGEE ASSY-8 INCH FRONT 0 Item Ref. No. Qty Description Squeegee Assembly (Includes Gum Rubber Blades) Nut, Hex Nyl Loc-Thin SS 5/ Wsh-Flt SAE SS 5/ Scr-Hex Thd To Hd SS 5/6-8 X Scr, Thumb SS 5/6-8 X Nut-Hex Jam SS 5/ Button Plug Nut Thumb Item Ref. No. Qty Description Blade Kit-Squeegee-Gum 8 NOTE * Blade Kit-Squeegee-PU 8 NOTE * Blade Kit-Squeegee-Red Gum 8 NOTE 9 Squeegee-Casting 8 Inch NOTE Clamp-Band 8 Inch Assembly Bushing, Nylon Wheel, 4.00 OD Front Strap Weldment * = Optional, Not Included NOTE : All squeegee blade kits include both front and rear squeegee blades. NOTE : The squeegee casting is not available for sale separately. If you need to replace your squeegee casting please order a new Squeegee Assembly part number Focus II Rider /0

33 PARTS LIST SQUEEGEE ASSY-34 INCH 6 FRONT Item Ref. No. Qty Description Squeegee Assembly (Includes Gum Rubber Blades) Nut, Hex Nyl Loc-Thin SS 5/ Wsh-Flt SAE SS 5/ Scr-Hex Thd To Hd SS 5/6-8 X Scr, Thumb SS 5/6-8 X Nut-Hex Jam SS 5/ Button Plug Nut Thumb Item Ref. No. Qty Description Blade Kit-Squeegee-Gum 34 NOTE * Blade Kit-Squeegee-PU 34 NOTE * Blade Kit-Squeegee-Red Gum 34 NOTE 9 Squeegee-Casting 34 Inch NOTE Clamp-Band 34 Inch Assembly Bushing, Nylon Wheel, 4.00 OD Front Strap Weldment * = Optional, Not Included NOTE : All squeegee blade kits include both front and rear squeegee blades. NOTE : The squeegee casting is not available for sale separately. If you need to replace your squeegee casting please order a new Squeegee Assembly part number / Focus II Rider 3

34 PARTS LIST LADDER DIAGRAM- CB RED CIRCUIT BREAKER, 70A. RED YEL/ORN CIRCUIT BREAKER, 0 AMP CB BRN/VIO RED ON BOARD BATTERY CHARGER B+ (OPTIONAL) B- INTERLOCK 3 KEY SWITCH S GRA/ RED/VIO F FUSE, 50A. EMERGENCY SWITCH S4 RED WHT/BRN LP BATTERY PACK, 4 Vdc + BT - FLASHING WARNING BEACON OPTIONAL SEAT SWITCH S WHT/BRN BRN BRN/ RED B+ WHT/BRN WHT/BRN WHT/BRN BRN/VIO GRA/ J3- B+ J3-8 B+ J3-4 KEY SWITCH SEAT SWITCH J3-4 Y ELECTRIC BRAKE A WHEEL DRIVE CONTROLLER J-3 BAT CHARGER ON BOARD COMMUNICATION 3 K MOTION J3-6 RED/WHT PIN 6 - BRAKE GRY/ J3- VACUUM PIN 9 - STATUS CONTACTOR STATUS J3-7 ORN/BLU REV. ALARM J3-5 BLU/ CONTACTOR, VACUUM PIN 6 - REV. ALARM PIN 8 - MODE REVERSE J3-3 RED/BRN 3 K PIN 7 - REVERSE SPEED LIMIT J-4 /WHT PIN 8 - SPEED LIMIT 3 4 WHT/RED J3-3 BRUSH VIO PIN 3 - POT. LOW CONTACTOR CONTACTOR BRUSH GRY PIN 4 - POT. WIPER POT. HIGH J-6 YEL A MAIN MACHINE CONTROLLER R B L POT. LOW J-5 VIO C A YEL PIN 3 - HIGH VIO/ J3- SOLUTION SOLENOID DRIVE PEDAL SOLUTION SOLENOID VALVE SENSOR. WHEN NO CHARGER IS PRESENT INSTALL JUMPER BETWEEN PIN AND PIN 3. ADD RECTIFIER ASSEMBLY( ) TO CONTACTORS K AND K AS SHOWN ON DIAGRAM BRN RED/WHT ORN PIN 4 - BRAKE + PIN 5 - KSI B+ B- M RED/GRN - M M + M YEL/ MOTOR, WHEEL DRIVE B- 3 Focus II Rider /0

35 /07 PARTS LIST LADDER DIAGRAM- Item Ref. No. Qty Description A# User Interface Panel Kit NOTE # User Interface Panel Kit NOTE 3 A Controller, Speed BT Battery F Fuse, 50 Amp (Standoff and Breaker Kit) CB Circuit Breaker, 70 Amp (Traverse) CB Circuit Breaker, 0 Amp (Key Switch) K Contactor 4v, 00 Amp (Vac) K Contactor 4v (Brush) L Solenoid Valve Assy TSB-FC LP 5646 Beacon, Warning (optional) M Motor / Drive Wheel R Part of Foot Pedal S Key Switch * A/R Replacement Key Set S Switch, Seat S Disconnect, Emergency (E-Stop Kit) Y Brake, Electromagnetic (replacement part for Motor / Drive Wheel) * Kit-OBC Focus II Rider NOTE * = Optional, Not Included # = Revised or new since last update NOTE : The onboard battery charger has been replaced in production by If you need to replace please order Onboard Charger Kit NOTE : Used on all models except BOOST. NOTE 3: Used on BOOST models only. 6/ Focus II Rider 33

36 PARTS LIST LADDER DIAGRAM- B+ RED RED OPTIONAL - M M H - + HORN + DETERGENT PUMP ORN/RED GRN/ RED/YEL BLU/GRY K CONTACTOR, VACUUM WHT SQUEEGEE ACT(-) J-9 SQUEEGEE ACT(+) J-0 A MAIN MACHINE CONTROLLER B- J-8 J3-0 HORN + J3-9 HORN - J- + DETERGENT PUMP J-3 - DETERGENT PUMP POSITION J- POSITION J- DECK ACT (-) J-5 DECK ACT (+) J-4 BRUSH MOTOR SENSE J-0 VACUUM MOTOR SENSE J-9 B- J-8 B- J-7 B- J- B- J- B- J3- B /YEL MOTOR,SQUEEGE LIFT ACTUACTOR M3 A B A WHT/GRN /WHT C ORN/ B A BLU RED/VIO YEL/VIO YEL/ BRN/RED + + M4 M M - S5 S6 MOTOR,DECK LIFT ACTUACTOR M5 - B- WHT M MOTOR, VAC (OPTIONAL) M6 M MOTOR, VAC RED + M7 M - RED K RED CONTACTOR, BRUSH RED MOTOR, BRUSH LEFT DISK AND CYLINDRICAL M8 - M RED + MOTOR, BRUSH CENTER DISK AND BOOST M9 RED + M - MOTOR, BRUSH RIGHT DISK AND CYLINDERICAL 34 Focus II Rider /0

37 /07 PARTS LIST LADDER DIAGRAM- Item Ref. No. Qty Description A# User Interface Panel Kit NOTE # User Interface Panel Kit NOTE H Horn/Backup Alarm K Contactor 4V, 00 Amp (Vac) K Contactor 4V (Brush) M Pump, Detergent (optional) M Actuator, Motor 4V (Squeegee Lift) M Lift Actuator Assembly (Deck Lift) M Motor, Vac 4VDC (Vac Motor Kit) [ ] Carbon Brush Set of (for Vac Motor) M Motor, Vac 4VDC (optional) (Vac Motor Kit) [ ] Carbon Brush Set of (for Vac Motor) M Motor Gearbox Assy (disk) (8 & 34) (Motor Kit) [ ] Carbon Brush Set of (for Disk Motor) M Motor 4VDC (BOOST) [ ] Carbon Brush Set of 4 (for ) M Motor Gearbox Assy (disk) (8 & 34) (Motor Kit) [ ] Carbon Brush Set of (for Disk Motor) S5 Part of A S6 Part of A [ ] = Not Shown # = Revised or new since last update NOTE : Used on all models except BOOST. NOTE : Used on BOOST models only. 6/ Focus II Rider 35

38 PARTS LIST 5/04 LADDER DIAGRAM- [AFTER JUNE 04] CB RED CIRCUIT BREAKER, 70A. RED F FUSE, 50A. RED BATTERY PACK, 4 Vdc + BT - BRN/ A B ON BOARD BATTERY CHARGER (OPTIONAL) RED YEL/ORN CIRCUIT BREAKER, 0 AMP CB BRN/VIO BRN/VIO 3 BRN 3 FUSE INLINE, 3A EMERGENCY SWITCH F S4 GRA/ KEY SWITCH S WHT/BRN LP FLASHING WARNING BEACON OPTIONAL SEAT SWITCH S WHT/BRN BRN RED B+ WHT/BRN WHT/BRN WHT/BRN BRN/VIO GRA/ J3- B+ J3-8 B+ J3-4 KEY SWITCH SEAT SWITCH J3-4 Y ELECTRIC BRAKE A WHEEL DRIVE CONTROLLER J-3 BAT CHARGER ON BOARD COMMUNICATION 3 K MOTION J3-6 RED/WHT PIN 6 - BRAKE GRY/ J3- VACUUM STATUS J3-7 ORN/BLU PIN 9 - STATUS CONTACTOR REV. ALARM J3-5 BLU/ CONTACTOR, VACUUM PIN 6 - REV. ALARM PIN 8 - MODE REVERSE J3-3 RED/BRN 3 K PIN 7 - REVERSE SPEED LIMIT J-4 /WHT PIN 8 - SPEED LIMIT 3 4 WHT/RED J3-3 BRUSH VIO PIN 3 - POT. LOW CONTACTOR CONTACTOR BRUSH GRY PIN 4 - POT. WIPER POT. HIGH J-6 YEL A MAIN MACHINE CONTROLLER R B L POT. LOW J-5 VIO C A YEL PIN 3 - HIGH VIO/ J3- SOLUTION SOLENOID DRIVE PEDAL SOLUTION SOLENOID VALVE SENSOR. WHEN NO CHARGER IS PRESENT INSTALL JUMPER BETWEEN PIN AND PIN 3. ADD RECTIFIER ASSEMBLY( ) TO CONTACTORS K AND K AS SHOWN ON DIAGRAM BRN RED/WHT ORN PIN 4 - BRAKE + PIN 5 - KSI B+ B- M RED/GRN - M M + M YEL/ MOTOR, WHEEL DRIVE B- 36 Focus II Rider /0

39 /07 PARTS LIST LADDER DIAGRAM- [AFTER JUNE 04] Item Ref. No. Qty Description A# User Interface Panel Kit NOTE # User Interface Panel Kit NOTE 3 A Controller, Speed BT Battery F Fuse, 50 Amp (Standoff and Breaker Kit) CB Circuit Breaker, 70 Amp (Traverse) CB Circuit Breaker, 0 Amp (Key Switch) K Contactor 4v, 00 Amp (Vac) K Contactor 4v (Brush) L Solenoid Valve Assy TSB-FC LP 5646 Beacon, Warning (optional) M Motor / Drive Wheel R Part of Foot Pedal S Key Switch * A/R Replacement Key Set S Switch, Seat S Disconnect, Emergency (E-Stop Kit) Y Brake, Electromagnetic (replacement part for Motor / Drive Wheel) * Kit-OBC Focus II Rider NOTE * = Optional, Not Included # = Revised or new since last update NOTE : The onboard battery charger has been replaced in production by If you need to replace please order Onboard Charger Kit NOTE : Used on all models except BOOST. NOTE 3: Used on BOOST models only. 6/ Focus II Rider 37

40 PARTS LIST 5/04 LADDER DIAGRAM- [AFTER JUNE 04] B+ RED RED OPTIONAL - M M H - + HORN + DETERGENT PUMP ORN/RED GRN/ RED/YEL BLU/GRY K CONTACTOR, VACUUM WHT SQUEEGEE ACT(-) J-9 SQUEEGEE ACT(+) J-0 A MAIN MACHINE CONTROLLER B- J-8 J3-0 HORN + J3-9 HORN - J- + DETERGENT PUMP J-3 - DETERGENT PUMP POSITION J- POSITION J- DECK ACT (-) J-5 DECK ACT (+) J-4 BRUSH MOTOR SENSE J-0 VACUUM MOTOR SENSE J-9 B- J-8 B- J-7 B- J- B- J- B- J3- B /YEL MOTOR,SQUEEGE LIFT ACTUACTOR M3 A B A WHT/GRN /WHT C ORN/ B A BLU RED/VIO YEL/VIO YEL/ BRN/RED + + M4 M M - S5 S6 MOTOR,DECK LIFT ACTUACTOR M5 - B- WHT M MOTOR, VAC (OPTIONAL) M6 M MOTOR, VAC RED + M7 M - RED K RED CONTACTOR, BRUSH RED MOTOR, BRUSH LEFT DISK AND CYLINDRICAL M8 - M RED + MOTOR, BRUSH CENTER DISK AND BOOST M9 RED + M - MOTOR, BRUSH RIGHT DISK AND CYLINDERICAL 38 Focus II Rider /0

41 /07 PARTS LIST LADDER DIAGRAM- [AFTER JUNE 04] Item Ref. No. Qty Description A# User Interface Panel Kit NOTE # User Interface Panel Kit NOTE H Horn/Backup Alarm K Contactor 4V, 00 Amp (Vac) K Contactor 4V (Brush) M Pump, Detergent (optional) M Actuator, Motor 4V (Squeegee Lift) M Lift Actuator Assembly (Deck Lift) M Motor, Vac 4VDC (Vac Motor Kit) [ ] Carbon Brush Set of (for Vac Motor) M Motor, Vac 4VDC (optional) (Vac Motor Kit) [ ] Carbon Brush Set of (for Vac Motor) M Motor Gearbox Assy (disk) (8 & 34) (Motor Kit) [ ] Carbon Brush Set of (for Disk Motor) M Motor 4VDC (BOOST) [ ] Carbon Brush Set of 4 (for ) M Motor Gearbox Assy (disk) (8 & 34) (Motor Kit) [ ] Carbon Brush Set of (for Disk Motor) S5 Part of A S6 Part of A [ ] = Not Shown # = Revised or new since last update NOTE : Used on all models except BOOST. NOTE : Used on BOOST models only. 6/ Focus II Rider 39

42 PARTS LIST 7/05 OPTIONAL KITS & ACCESSORIES Item Ref. No. Qty Description Kits * Kit-Battery Fill Indicator * Kit-Seat Armrests NOTE 4 * Arm Rest Kit R/H + L/H NOTE 5 * Kit-Warning Beacon * Kit-Vacuum Wand With Caddy * 5646 Kit-Seat Belt * Kit-Dual Vac Motor * Battery Watering Kit * Kit-On Board Chemical * Kit-Vacuum Sound Reduction * Kit-OBC Focus II Rider 8 Squeegee Blade Kits Blade Kit-Squeegee-Gum 8 NOTE * Blade Kit-Squeegee-PU 8 NOTE * Blade Kit-Squeegee-Red Gum 8 NOTE 34 Squeegee Blade Kits Blade Kit-Squeegee-Gum 34 NOTE * Blade Kit-Squeegee-PU 34 NOTE * Blade Kit-Squeegee-Red Gum 34 NOTE Item Ref. No. Qty Description BOOST Pads (See Pad Selector Guide) * Pad-Maroon-4x8-0/Cs (Qty 0) * 30794A Velcro, Sided 4 x 8 * Pad, White, 4 x 8 (Qty 5) * Pad, Red, 4 x 8 (Qty 5) * Pad, Blue, 4 x 8 (Qty 5) * Pad, Black, 4 x 8 (Qty 5) * Pad, 3M Hi Pro, 4 x 8 (Qty 0) * Pad, Grout, 4 x 8 (Qty 4) * BOOST Wet Screen 60 Grit (Qty 0) * BOOST Wet Screen 80 Grit (Qty 0) * BOOST Wet Screen 00 Grit (Qty 0) * 9970 BOOST Wet Screen 0 Grit (Qty 0) * = Optional, Not Included Disk Deck Blade Kits Skirt Kit-8D34D-Gum (Gum) NOTE * Skirt Kit-8D34D-PU (PU) NOTE * Skirt Kit-8D34D-Red Gum (Red Gum) NOTE Blade Front 8 Gum (Gum) * Blade Front 8 PU (PU) Blade Front 34 Gum (Gum) * Blade Kit-Front 34 IN W/FAST (includes mounting rivets) * Blade Front 34 PU (PU) BOOST Deck Blade Kits Blade Kit-Gum NOTE 3 * Blade Kit-PU NOTE 3 * Blade Kit-Red Gum NOTE 3 Accessories * Programmer-User * Programmer Cable-Molex * Literature Pack (manufactured before July 04) * Literature Pack (manufactured after June 04) 8 Disk Scrub Brushes (See Brush Selector Guide) * 5644 Pad Driver * 5644 Soft Nylon * 5643 Poly * 5645 Lite Grit * 5646 Medium Grit * 5647 Heavy Grit 34 Disk Scrub Brushes (See Brush Selector Guide) * Pad Driver * 5649 Soft Nylon * 5648 Poly Brush * Lite Grit * 5643 Medium Grit * 5643 Heavy Grit NOTE : All squeegee blade kits include both front and rear squeegee blades. NOTE : All disk deck blade kits include all side skirt blades, does not include the front deck blade. NOTE 3: All BOOST deck blade kits include both left and right side deck blades. NOTE 4: Only for (seat with steel seat pan). NOTE 5: Only for (seat with plastic seat pan). 40 Focus II Rider /0

43 PARTS LIST BRUSH SELECTOR GUIDE-DISK We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. Soft Nylon: Bristles are made from light-duty polypropylene for general scrubbing when you do not want to scratch or remove finish from the floor. Recommended for use in place of red pads. Poly: Lite Grit: Medium Grit: Heavy Grit: Polypropylene material for medium-duty scrubbing on concrete, terrazzo and vinyl floor tile. Recommended for use in place of green or blue pads. For light scrubbing when used wet; buffing or polishing when used dry on urethane coated, sealed concrete or other resilient hard surface floors. Recommended for use in place of red or white pads. For general purpose scrubbing of sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. For aggresive, heavy-duty scrubbing or stripping of floors. Recommended for use in place of brown pads. 8 DECK BRUSHES Pad Driver Soft Nylon Poly Lite Grit Medium Grit Heavy Grit 34 DECK BRUSHES Pad Driver Soft Nylon Poly Lite Grit Medium Grit Heavy Grit DISC BRUSH APPLICATION GUIDE (SUGGESTION ONLY) Heavy Medium Lite Soft Application Grit Grit Grit Poly Nylon Stripping: Concrete X Terrazzo X Ceramic/Quarry tile X Vinyl tile X General Scrubbing: Concrete X X X X Terrazzo X X X Ceramic/Quarry tile X X X Marble X X X Vinyl tile X X X Raised-rubber tile X X X 6/ Focus II Rider 4

44 PARTS LIST 7/04 PAD SELECTOR GUIDE-BOOST We provide pads that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. White: Grout Cleaning Pads: Red: Blue: Black: 3M Hi Pro: Maroon: For very light scrubbing on high gloss floor finishes where a red pad may be too aggressive. For scrubbing grouted tile floors, terrazzo, poured non-slip floors and other uneven floors. Aggressive but not abrasive. Green in color. Serged to secure the edges. Most popular daily cleaning and scrubbing pad for use on a wide varieties of floors. For heavy duty scrubbing prior to recoating. Removes dirt, spills and scuffs, leaving a clean surface ready for recoating. For conventional stripping with chemicals. For conventional stripping with chemicals. Unique open web construction allows stripping solution to flow through the pad to rinse out dirt and reduce loading for increased pad-to-floor contact and more efficient stripping. Prepares wood, vinyl tile, sheet vinyl, marble, terrazzo and concrete floors for refinishing. 8 BOOST DECK PADS 30794A - Velcro, Sided White (Case of 5) Grout Cleaning Pads (Case of 4) Red (Case of 5) Blue (Case of 5) Black (Case of 5) M Hi Pro (Case of 0) Maroon Surface Prep (Case of 0) 8 BOOST SANDING SCREENS BOOST Wet Screen 60 Grit BOOST Wet Screen 80 Grit BOOST Wet Screen 00 Grit BOOST Wet Screen 0 Grit 4 Focus II Rider /0

45 7/04 PARTS LIST SQUEEGEE BLADE SELECTOR GUIDE Gum Rubber: Red Gum Rubber: Polyurethane: Provides superior wiping action on tile, terrazzo, and polished floors. Provides longest life on finished or unfinished concrete floors. Oil resistance provides superior life in applications with oily floors. SQUEEGEE BLADE APPLICATION GUIDE(SUGGESTION ONLY) Performance Traits Gum Rubber (Natural Rubber) Red Gum Rubber (Natural Rubber) Polyurethane/ Pentathane Tear Strength X X Abrasion Resistance X X Applications Oil Resistant Applications X Appearance Tan Red Translucent 6/ Focus II Rider 43

46

47

48 A Nilfisk Brand 9435 Winnetka Ave North Minneapolis, MN Phone: Fax: Nilfi sk, Inc.