DRONE & UAV.

Transcription

1 DRONE & UAV Extended flight time Proven to be reliable, safe and easy to use Various fields of operation Completely autonomous, and manually controlled

2 ERAP DRONE & UAV WHY ERAP s MAPPING DRONE? 1. Map more, more accurately The ERAP s mapping drones can cover up to 5~70 sq. km(depengind on the model) in a single flight, and over more focused areas, flying at lower altitudes; they can acquire images with a Cannon 5DII & Cannon 5DMarkII of down to 1.5cm/pixel. 2. No flying skills required The ERAP s mapping drones are easy to launch with the auto launch system. They then fly, capture images & land themselves. (However you can reprogram their flight or land manually if required.) 3. Safety matters The ERAP s mapping drones use Fiber Reinforced Plastics material and stable structure, minimizing their impact energy. 4. It s all you need The ERAP s mapping drones are supplied with two sturdy carry cases and two software packages: Ground station (flight planning and control) & UAV 3D Mapping (professional photogrammetric) ED 550M (NIMBLE) ED 560M (COSMIC) Frame Character Performance Frame Weight 1kg Hovering Accuracy(GPS Mode) Diameter 55cm Max Yaw Angular Operation Range Up to 10 Km Velocity Takeoff Weight kg Operating Propeller In ; In Temperature Vertical:±0.8mHorizontal:±2.5m 200 /s -30 C 50 C Battery 3S 4S LiPo Transmitter PCM or 2.4GHz with minimum 4 Motor 22 12mm channels Flight time 60 min Max Speed 50km/h

3 Multi-purpose Unmanned Aerial System ED 550W A battery-powered quad-rotor multi-purpose VTOL designed for law enforcement, search & rescue, investigation, military operations and surveillance etc. in inclement weather or around water Water-resistance: Take-off and landing on water, as well as maneuver on the surface of the water. Waterproofed HD Camera: LED lights providing night time illumination to facilitate night time filming and underwater observation Standard Payloads: 2D stabilized gimbal, HD EO camera, FLIR Thermal Imager Diameter 50cm (19.7 Inch) Max Altitude 762m (2500 ft) Propeller size 23.9 X 10.9cm (9.4 X 4.3 Inch) Max Speed 37km/h UAV Weight 1.6kg (3.53 lbs) GPS Accuracy 2.5meter CEP (SBAS available) Flight Time Up to 25min Payload 0.4kg Battery Li-Po, 4S1P Operation range Up to 5 Km ED 500 A battery-powered hex-rotor multi-purpose VTOL unmanned aerial system designed for law enforcement, search and rescue, fire management, and infrastructure inspection markets Standard Payloads: 2D stabilized gimbal, HD EO camera, FLIR Thermal Imager Diameter 68cm (26.8 Inch) Max Altitude 1,524m (5000 ft) Propeller size X 10.16cm (13 X 4 Inch) Max Speed 40.2 km/h UAV Weight 1.47 kg (3.23 lbs) GPS Accuracy 2.5 meter CEP (SBAS available Flight Time Up to 30 min Payload 0.4 kg (0.88 lbs) Battery Li-Po, 4S1P Operation range Up to 5 Km

4 ERAP DRONE & UAV Multi-purpose Unmanned Aerial System ED800 Hardware Weight (inc. supplied camera): Approx. 6.5kg Wingspan: 1300mm Material: Fiber Reinforced Plastics Propulsion: Electric pusher propeller, 520 W brushless DC motor Battery: 22.2 V, mah Camera (supplied): SONY NEX-7 Cameras (optional): SONY A7R Carry Case: :1000mm 1000mm 1000mm 10.00KG Operation Maximum flight time: 20 minutes Nominal cruise speed: 12 m/s Radio link range: 10km Maximum coverage (single flight): 5 km² Wind resistance: Up to 45 km/h (12m/s or 28 mph) Ground Sampling Distance (GSD): Down to 1.5 cm (0.6 in) per pixel Relative orthomosaic/3d model accuracy: 1-3x GSD Absolute horizontal/vertical accuracy (w/gcps): Down to 3 cm (1.2 in) / 5 cm (2 in) Absolute horizontal/vertical accuracy (no GCPs): 1-5 m ( ft) Multi-drone operation: Yes (inc. mid-air collision avoidance) Automatic 3D flight planning: Yes Linear landing accuracy: Approx. 5 m (16.4 ft) ERAP s VTOL ideal for your application 1. Waypoints changeable during the mission 2. FPV (First Person View) and autonomous mission capability 3. Standard failsafe modes to protect against damage by returning to launch, upon low battery voltage or GPS fault detection 4. Autopilot with PixHawk, GPS-assisted, gyro and accelerometer flight control 5. Control system including Jam-resistant spread spectrum and frequency hopping 6. Stabilized Flight System with 3-axes gyros and accelerometers, barometer, and magnetometer

5 ED700 Hardware Max Take-off Weight: 25 kg Max Payload Weight: 10 kg Max dimensions: Diameter 2136 mm (including blade protectors) Height: 600mm Operation Operating Speed (ground speed): 0 70 km/h Operational Altitude: <200 m AGL Service Ceiling: 1000 m AGL Max Service Ceiling: 2000 m AGL Max Flight time: If payload weight is 1kg flight time is up to 60min If payload weight is 7kg flight time is 40min Control Data Link Range: Up to 5 km (up to 60km as an option) Telemetry Range: Up to 3 km (up to 60km as an option) Control: Manual / Autonomous GCS consoles connection: Wireless Secondary Console: Payload control, Wireless HD video, Seperate from pilot Power Source: Rechargeable Li-Po Batteries

6 ERAP DRONE & UAV Multi-purpose Unmanned Aerial System Operation Hardware Weight (inc. supplied camera): Approx. 3.0 kg Wingspan: 1640mm Material: Fiber Reinforced Plastics Propulsion: Electric pusher propeller, 520 W brushless DC motor Battery: 14.8 V, mah Camera (supplied): SONY NEX-7 Cameras (optional): SONY A7R Carry case Case1: 1060mm 460mm 310mm 11.95KG Maximum flight time: 60 minutes Nominal cruise speed: 65 km/h Radio link range: 20-60km Maximum coverage (single flight): 15 km² Wind resistance: Up to 45 km/h (12m/s or 28 mph) Ground Sampling Distance (GSD): Down to 1.5 cm (0.6 in) per pixel Relative orthomosaic/3d model accuracy: 1-3x GSD Absolute horizontal/vertical accuracy (w/gcps): Down to 3 cm (1.2 in) / 5 cm (2 in) Absolute horizontal/vertical accuracy (no GCPs): 1-5 m ( ft) Multi-drone operation: Yes (inc. mid-air collision avoidance) Automatic 3D flight planning: Yes Linear landing accuracy: Approx. 5 m (16.4 ft) Plan your SAFE flight The ground station software makes it easy to plan and simulate your mapping mission. Plan: Import your preferred base map and define the area you want to cover. Then specify your required ground resolution, with a maximum GSD of 1.5 cm, and image overlap. The ground station automatically generates a full flight plan, calculating the required altitude and displaying its projected trajectory. Flying over uneven terrain? : Use a 3D mission planning feature of the ground station to take elevation data into account when setting the altitude of waypoints and the resulting flight lines improving ground resolution and increasing safety. Simulation: Make any required flight plan updates and prepare to launch to ensure the success of your mission, run a virtual flight that simulates wind strength and directions.

7 Tested in thousands of hours of flight Proven to be reliable, safe, and easy to use. Mapping of 1,000 acres in less than 100 minutes at 5cm resolution Completely autonomous, or manually controlled. Day/Night time surveillance for long endurance missions in remote areas Dimensions Wingspan 190cm (74.8 Inch) Opertion Range Complete mission planning and operations SW Operating Conditions Length 70km (44 miles) Map 130cm (75 x 51 Inch) For your Windows 7 or 8 laptop (not included) Up to 960 geo-referenced acres per flight at 3.0cm/ pixel resolution (390 Ha) Autonomous flight, Return-to-launch, Automated pre-flight checklists etc. MSL Ceiling 3,960 meters, (13,000 ft), - auto take-off tested to 3,100 meters, (10,000 ft) Max wind speed Telemetry Range 10 m/sec, (22 mph) for autonomous operation 1km from ground station to aircraft, (0.6 mi) Weight 2.5kg (5.6lbs) Payload Automatic lens protection for landing Endurance 1 hour to 1 ½ hours (1kg/2.2lbs) Electro Optical (HD Video) Flight Speed 46.8km/h (29mph) Infra Red (FLIR-320)

8 ERAP DRONE & UAV Multi-purpose Unmanned Aerial System Hardware Weight (inc. supplied camera): Approx kg Wingspan: 2800 mm Material: Fiber Reinforced Plastics Propulsion: Gasoline Engine Fuel load: 6.0L Camera (supplied): Cannon 5DMarkII Cameras (optional): S110 RGB, thermo MAP Carry case dimensions: Case 1: 875mm 355mm 620mm 15.0KG Case 2: 920mm 255mm 650mm 16.0KG Operation Maximum flight time: 2-3hours Nominal cruise speed: 110 km/h Radio link range: 20-60km Maximum coverage (single flight): km² Wind resistance: Up to 45 km/h (12m/s or 28 mph) Ground Sampling Distance (GSD): Down to 1.5 cm (0.6 in) per pixel Relative orthomosaic/3d model accuracy: 1-3x GSD Absolute horizontal/vertical accuracy (w/gcps): Down to 3 cm (1.2 in) / 5 cm (2 in) Absolute horizontal/vertical accuracy (no GCPs): 1-5 m ( ft) Multi-drone operation: Yes (inc. mid-air collision avoidance) Automatic 3D flight planning: Yes Linear landing accuracy: Approx. 5 m (16.4 ft)

9 Specification Material: Fiber-Glass Wing Span: 2030mm Empty Weight: 700g Take off Weight :2100g Max Takeoff Weight : 3500g Flight Time: Up to 1 hour Motor: Electric, Brushless 4822 Battery: Li-Po, 5S 6000mah Propeller: 11*5.5E 2-blade Features Fiber-glass 2M wingspan T -tail UAV Platform Large size cabin for FPV Autopilot or other system instalation Man portable - detachable main wings and tail wings, easy to install and un-install Fiber-Glass fuselage, balsa wood wing reinforced, carbon fiber tail pipe Improvement with additional software and payload options upon customer request. Create ACCURATE flight output Process: Use ERAP s UAV supplying UAV Mapping software to easily process your flight s photos. In just a few clicks you can transform this imagery into geo-referenced 2D orthomosaics, 3D point clouds, triangle models and Digital Elevation Models (DEMs). Accuracy: With the GSD of down to 1.5 cm, relative orthomosaic/3d model accuracy of 1-3x GSD, and absolute horizontal/vertical accuracy of down to 3/5cm, you can have full confidence in the accuracy of the outputs you produce. Result: Once you have created your orthomosaic and 3D model, it's time to put this data to work - for example by measuring distances, taking cross-sections, extracting volume data, or exporting to third-party software to add GIS data or create custom maps.

10 ERAP DRONE & UAV Multi-purpose Unmanned Aerial System Operation Hardware Weight (inc. supplied camera): Approx. 9.0 kg Wingspan: 2000 mm Material: Fiber Reinforced Plastics Propulsion: Gasoline Engine Fuel load: 3.0L Camera (supplied): Cannon 5DII Cameras (optional): S110 RGB, thermo MAP Carry case dimensions: Case 1: 875mm 355mm 620mm 12.1KG Case 2: 920mm 255mm 650mm 15.8KG Maximum flight time: 4 hours Flight speed: 110 km/h Radio link range: 20-60km Operation range (single flight): km² Wind resistance: Up to 45 km/h (12m/s or 28 mph) Ground Sampling Distance (GSD): Down to 1.5 cm (0.6 in) per pixel Relative orthomosaic/3d model accuracy: 1-3x GSD Absolute horizontal/vertical accuracy (w/ GCPs): Down to 3 cm (1.2 in) / 5 cm (2 in) Absolute horizontal/vertical accuracy (no GCPs): 1-5 m ( ft) Multi-drone operation: Yes (inc. mid-air collision avoidance) Automatic 3D flight planning: Yes Linear landing accuracy: Approx. 5 m (16.4 ft) Make your flight EASIER Launch: The artificial intelligence inside the autopilot continuously analyses data provided by the Inertial Measurement Unit and onboard GPS to control every aspect of its flight. Monitor: Using the ground station software you can view the flight parameters, battery level and image acquisition progress in real time. Control: Made a mistake with your planning? Reprogram your drone s flight plan and landing point mid-flight.

11 GCS & Camera Specification Airframe Length 850 mm Wing span 1,200 mm Empty weight 3.1 kg Performance Flight duration 1 hour Flight range 5 km Flight speed 50~70 km/h Integrated GCS EO camera Integral GCS EO/IR camera FCC provides manual and automatic mode Manual Mode / Altitude Mode / Home Mode / Loiter Mode / Navigation Waypoint Mode Camera of aircraft acquires image of mission area - Acquire image by real-time(eo/ir camera) - Target tracking function(target Lock-on) Military operation - Outstanding performance of secrecy and operability - Perform reconnaissance and surveillance missions Civil operation - Replace reconnaissance aircraft(helicopter) that is utilized in existing (Dramatic reduction in operation and maintenance costs)

12 Head Office: Migun II - #212, Yongsan-dong, Yuseong-gu, Daejeon, Korea T: F: Factory: Hansan-gil 16, Cheongbuk-myeon, Pyeongtaek-si, Gyeonggi-do, Korea T: F: Seoul Office: Ace-Hi End 6, 19th Fl. 234, Beotkkot-ro, Geumcheon-gu, Seoul T: F: Sales@erapkorea.co.kr Website :