Associated Equipment. Online Auction Of Automotive Test Rigs & Associated Equipment. Lot no. Description
|
|
- Aleesha Jackson
- 6 years ago
- Views:
Transcription
1 Torotrak Sale 3: Automotive Test Rigs Associated Equipment (Ends: :00:00.0) Online Auction Of Automotive Test Rigs & Associated Equipment. Lot Kw Engine Dynamometer Dynamometer: DC motoring / absorbing dyno (David McClure 315kW DC motor) Engine and transmission connection: Pallet system (for swift connection to rig I/O and to the dynamometer gearbox) 2-off pallet frames available Fuel measurement system: AVL 733S Fuel Temperature Control: Date of rig installation: a Light Run Test Rig (Noise Cell) Overview "This rig is used to: (i) Spin testing transmissions following build (end of line pass off) (ii) Conduct NVH investigative tests on a transmission system The noise cell was constructed around the spin rig frame, where transmissions for test are mounted on a vertical face plate (motor drive Sicmemotori 55kW Electric Motor With Control Panel Sicmemotori 55kW Electric Motor With Control Panel, Parker AC 690+ inverter is fitted with a CANopen card Page 1 of 15
2 1003 Hydraulic Power Pack Hydraulic Power Pack, With filters, valves, heater Hydraulic power pack is fitted with a quad gang (4-outlet) pump. Control stand containing Hydraforce pressure control valves are also included 1004 Rig Control Panel Rig Control Panel Primary control module is an Pi Innovo OpenECU M220, with additional CAN modules (ESD and Axiomatic) to enhance the I/O channel count. CAN-CBX-AI814: 8 A/D-Converter Inputs Axiomatic: Thermocouple scanner 1005 HBM MGC Data Acquisition System HBM MGC Data Acquisition System 1006 ABB 93kW Electric Motor And Control Panel ABB 93kW Electric Motor And Control Panel. Motor: ABB HDP VM4 motor with encoder Inverter: ABB ACS Inverter drive 90kW, with CAN interface and an encoder output Motor and encoder were bought, installed and commissioned in Hydraulic Power Pack Hydraulic Power Pack, With filters, valves, heater Hydraulic power pack is fitted with a quad gang (4-outlet) pump Control stand containing Hydraforce pressure control valves are also included Page 2 of 15
3 1008 Rig Control Panel Rig Control Panel In the description add: Primary control module is an Pi Innovo OpenECU M220, with additional CAN modules (ESD and Axiomatic) to enhance the I/O channel count. CAN-CBX-AI814: 8 A/D-Converter Inputs Axiomatic: Thermocouple scanner Accelerometer signal conditioning box provides an RMS ABB 93kW Electric Motor And Control Panel ABB 93kW Electric Motor And Control Panel Motor: ABB HDP VM4 motor with encoder Inverter: ABB ACS Inverter drive 90kW, with CAN interface and an encoder output Motor and encoder were bought, installed and commissioned in Hydraulic Power Pack 1011 Rig Control Panel Hydraulic Power Pack, With filters, valves, heater : Hydraulic power pack is fitted with a quad gang (4-outlet) pump. o Control stand containing Hydraforce pressure control valves Rig Control Panel 1012 steel cabinet In the description add: Primary control module is an Pi Innovo OpenECU M220, with additional CAN modules (ESD and Axiomatic) to enhance the I/O channel count. CAN-CBX-AI814: 8 A/D-Converter Inputs Axiomatic: Thermocouple scanner Accelerometer signal conditioning box provides an RMS... steel cabinet Page 3 of 15
4 1013 wooden topped bench wooden topped bench 1014 Steel Trolley Steel Trolley 1015 HBM Spider 8 Data Acquisition Panels HBM Spider 8 Data Acquisition Panels 1016 Pneumatic Fitting Release Tools Pneumatic Fitting Release Tools, 6, 8, 10, 12mm 1017 LOT WITHDRAWN 3 Electric Motors With Control Panels, 2 off 587kW motors,1 off 150kW motor 1018 LOT WITHDRAWN David Brown Gearboxes with hydraulic power packs, David Brown Gearboxes: kw 600 to 2000 rpm Maximum Test Piece Input Torque: 3, rpm [ 1 : 1 Ratio gearbox ] 1, rpm [ 1 : Ratio ] rpm [ 1 : Ratio ] Maximum Test Piece Input Speed: 2,000 rpm [ 1:... Page 4 of 15
5 1019 Hydraulic Power Pack 1020 LOT WITHDRAWN Hydraulic Power Pack, With filters, valves, heater Hydraulic power pack is fitted with a quad gang (4-outlet) pump. Control stand containing Hydraforce pressure control valves. Hydraulic Power Pack, With filters, valves, heater Hydraulic power pack is fitted with a quad gang (4-outlet) pump. Control stand containing Hydraforce pressure control valves LOT WITHDRAWN HBM T10F/FS Torque Cell 2kNm 1022 LOT WITHDRAWN HBM Torque Cell 2kNm 1023 LOT WITHDRAWN Stromag Electro-magnetic clutch Model: MWU20-50 Rated torque: 500 Nm Page 5 of 15
6 1024 LOT WITHDRAWN Assorted Prop Shafts 1025 LOT WITHDRAWN Electronic Control Panel 1026 Quantity Of Fixings Quantity Of Fixings 1027 Vivoil Hydraulic Pumps Vivoil Hydraulic Pumps 1028 Inline Hydraulic Valves Inline Hydraulic Valves Page 6 of 15
7 1029 Assorted Hydraulic Valves Assorted Hydraulic Valves 1030 Assorted Bearings Assorted Bearings 1031 Isotron Accelerometers, Unused Isotron Accelerometers, Unused 1032 Phoenix Brushless Speed Controls Phoenix Brushless Speed Controls 1033 omegadyne Load Cells omegadyne Load Cells Page 7 of 15
8 1034 BMW Actuators BMW Actuators 1035 Axiomatic Valve Controllers Axiomatic Valve Controllers 1036 LOT WITHDRAWN Tractor Radar Ground Speed Sensor 1037 Chelsea PTO, unused Chelsea PTO, unused 1038 SKF Bearing Houses SKF Bearing Houses Page 8 of 15
9 1039 Box Of Valve Coils Box Of Valve Coils 1040 Hydraulic Accumulators Hydraulic Accumulators 1041 Assorted Spring Stock Assorted Spring Stock 1042 NeuMotors with integrated gearbox (4-off) NeuMotors with integrated gearbox (4-off) unused Specifications: 2-off: 1905/2.5Y/S/6.7HD 2-off: 1907/1.5Y/H/ Poly V Drive Pulleys Poly-V drive pulleys Manufacturers: INA: 8-off Litens: 3-off Page 9 of 15
10 off M36 x 160mm - grade 12.9 bolts 21-off M36 x 160mm - grade 12.9 bolts 1045 PALL differential pressure sensors PALL differential pressure sensors 12-off Actuation pressure:2.4bar 1046 Haldex Tandem Oil Pumps Haldex Tandem Oil Pumps, unused 1047 Magnetic Inline filters Magnetic Inline filters, unused 1048 Quantity Of Lin Bins Mixture of three sizes (small, medium, large) Page 10 of 15
11 1049 Quantity Of Lin Bins Mixture of three sizes (small, medium, large) 1050 Quantity Of Lin Bins Mixture of three sizes (small, medium, large) 1051 Quantity Of Lin Bins Mixture of three sizes (small, medium, large) 1052 Quantity Of Lin Bins Mixture of three sizes (small, medium, large) Page 11 of 15
12 Bosch Motors 4 Unused Bosch motors Unused Red Plastic Bins 60 Unused Red Plastic Bins 1055 HBM T40 200Nm torque transducer HBM T40 200Nm torque transducer 1056 HBM T40 200Nm torque transducer HBM T40 200Nm torque transducer lpm positive displacement flow meter (KEM) 70 lpm positive displacement flow meter (KEM) 1058 Hydraulic Power Pack This hydraulic power pack consists of the following sub-assemblies: 1x 5.5kW motor driving a quad gang of hydraulic pumps (for lubrication and test piece control) 1x 0.12kW motor driving a low pressure pump for offline filtration 1x Variable speed motor (motor has an integrated inverter) and pump assembly;... Page 12 of 15
13 1059 Inverters and AC motors (75kW) The Inverter drive cabinet was upgraded in 2012; it contains 2-off PARKER AC integrator 690+ series (75kW rating) with AC supply filter (EMC). Motor 1: Sicmemotori ACVA 160 BM, 3-phase AC motor, 75 kw, 255 Nm. Motor 2: Vascat MAC-Q 132X, 3-phase AC motor, 78 kw, 270Nm, Max speed of 6000 rpm, year of DONATI column mounted jib crane Donati crane Overall height = 2850 mm Jib length = 2850 mm (from centre line of pivot to the end of the jib) Load rating = 250kg Installed new and commissioned by Dales ( Torotrak high speed gearboxes Torotrak high speed gearbox; 20,000 rpm on the high speed shaft 3-off ratios available. All ratio use Gates Poly Chain Carbon belt: products/industrial/industrial-belts/synchronous-belts/ poly-chain-gt-carbon-belts Gearboxes are supplied with mounting frame shown in the photographs pivoting cantilevered gantry cable tray Overall height = 2700 mm Arm overall length = 1650 mm (from pivot pin centre line to end of the jib) x Prop-shaft and calibration fixtures Prop-shafts were manufactured by Dunning & Fairbank: Prop-shaft #1: length = 680 mm (min) and 750 mm (max) Prop-shaft #2: length = 785 mm (min) and 855 mm (max) Page 13 of 15
14 1064 Wheel torque and speed sensors Michigan Scientific Michigan Scientific Wheel Torque Transducers Integrated weatherproof torque transducer, slip ring, encoder, and amplifier assemblies: 5-off: Torque wheel transducers, modified wheel with rim adapters, hub adaptors (see photos) 5-off: Slip ring assemblies (see photos) These wheel and type assemblies were Neugart Model PLS 90 HP Gearboxes 2 of Neugart Modle PLS 90 HP Unused gearboxes. Ratio:4:1 Still boxed in original packaging Quantity of Lin Bins 3 cradboard boxes of Lin Bins. Mixed Sizes Instrument Rack 19" Instrument Rack containing HMB MGC+ (data acquisition), CnM H channel network box (with 2 off cameras), Netgear 5 Port Switch, AC to DC 24v 20 amp power supply JPS Fuel Flow Meter JPS Fuel Flow Meter Page 14 of 15
15 2000 LOT WITHDRAWN, OFFER ACCEPTED Rig architecture overview "Motor - motor power recirculation test rig for the testing of large main drive transmission systems. On the 'input' side of the test transmission, there is a 'main drive' motor, which is mechanically coupled to, and driven by a 'pony motor'. On the 'output' side of the test... Page 15 of 15
and General Factory Equipment Inspection Equipment
Torotrak Sale 1 : Automotive Industry (Ends: 2017-10-04 14:00:00.0) and General Factory Equipment Inspection Equipment Online Auction Of Automotive Industry Related Equipment & Inspection Equipment. Lot
More informationDavid Meek. Engineering Director Intertek Transportation Technologies. Sponsors
David Meek Engineering Director Intertek Transportation Technologies Sponsors NEW DEVELOPMENTS IN HIGH VOLTAGE EV SYSTEMS TESTING Innovations in Testing and Data Acquisition Dave Meek Engineering Director
More informationTE 91 PRECISION ROTARY VACUUM TRIBOMETER
TE 91 PRECISION ROTARY VACUUM TRIBOMETER Description The TE 91 Precision Rotary Vacuum Tribometer is based on a bench mounted test chamber. A motor driven test spindle, in the form of standard rotary feedthrough,
More informationFaculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III
. (R 03) Semester III AT63 AUTOMOTIVE COMPONENTS LABORATORY Multi Cylinder Petrol Engine. 3. 4. 5. 6. 7. 8. 9. 0. Multi Cylinder Diesel Engine Petrol and Diesel fuel systems each Heavy duty vehicle chassis
More informationProduct line: transmission systems for full electric and hybrid vehicles
CUSTOMER Bolloré line: transmission systems for full electric and Bluecar front wheel drive, front transversal electric motor coupled with gearbox 1 speed transaxle 50 kw, max. speed 12000 rpm, max. torque
More informationServo Systems KNIGHT GLOBAL CREATING A NEW STANDARD. Intelligent Assist Devices (IAD) Servo Technology Improves Productivity with Speed and Precision
Servo Systems Intelligent Assist Devices (IAD) KNIGHT GLOBAL CREATING A NEW STANDARD Servo Technology Improves Productivity with Speed and Precision VER. 01/12 Knight Servo Systems Knight Servo Systems
More informationDOUBLE ENDED AXLE MACHINE IS INCREASING AXLE DEMAND... AT A GLANCE. Welding. to robotic input conveyor feed... From robotic part pick-up...
MTIwelding.com IS INCREASING AXLE DEMAND... Out-pacing your manually loaded, single-end, axle welder s capability? Straining your scheduling because of long tooling change-overs? Overloading current cycle
More informationAXILINE TRANSMISSION DYNAMOMETER
AXILINE 97000 TRANSMISSION DYNAMOMETER Digital for Ease & Accuracy The Axiline 97000 is the perfect transmission dynamometer for most light to medium-duty front wheel drive, rear wheel drive, transverse,
More informationInnovative Testing Equipment. Torque sensors Vehicle Applications Actuators
Innovative Testing Equipment Torque sensors Vehicle Applications Actuators Custom-made measuring solutions As a leading drivetrain testing company, ATESTEO specialises in drivetrain and transmission testing
More informationPLC. Power Supply. Data overview. Peak force F peak [N]
CASM electric cylinders with brushless DC motors Introduction CASM electric cylinders powered by brushless DC motors are ideally suited for fast and powerful movements. Replacement of pneumatic cylinders
More informationVehicle Powertrain Dynamometer
Vehicle Powertrain Dynamometer Tender Documentation 1 Contents Description of the dynamometer... 3 Summary... 3 motors specification of the dynamometer for differentials... 4 Technical specification power
More informationCHAPTER-3 EXPERIMENTAL SETUP. The experimental set up is made with necessary. instrumentations to evaluate the performance, emission and
95 CHAPTER-3 EXPERIMENTAL SETUP The experimental set up is made with necessary instrumentations to evaluate the performance, emission and combustion parameters of the compression ignition engine at different
More informationThe Hydraulic Warehouse Australian Distributor of Quality Hydraulic Brands
Product RANGE The Hydraulic Warehouse Australian Distributor of Quality Hydraulic Brands The Hydraulic Warehouse is Australia s leading distributor of quality hydraulic brands. Based in Sydney Australia,
More informationEddy current Dynamometers
Eddy Current Brakes Depliant_2015 Page 1 of 41 Eddy Current Dynamometers from 5 kw to 3200 kw Apicom Eddy Current Dynamometers for all type of engine load test: Steady State load test Transient load test
More informationAir-Cooled Eddy Current Engine Dynamometers
Air-Cooled Eddy Current Engine Dynamometers Mustang s ED Series Air-Cooled Engine Dynamometers are the answer for ED Series Engine due Dynamometers most engine Air-Cooled testing applications to their
More informationCHAPTER 3 EXPERIMENTAL SET-UP AND TECHNIQUES
37 CHAPTER 3 EXPERIMENTAL SET-UP AND TECHNIQUES 3.1 EXPERIMENTAL SET-UP The schematic view of the experimental test set-up used in the present investigation is shown in Figure 3.1. A photographic view
More informationROBOTICS SAFETY MOTION & CONTROL. SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL
MOTION & CONTROL ROBOTICS SAFETY SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL Cedarburg Headquarters 7400 Quail Court P.O. BOX 860 Cedarburg, WI 53012 Weston Branch 4601-A Camp Phillips Rd Weston, WI 54476
More informationServices. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains
RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established
More informationINCREASED THE MACHINE PERFORMANCES OF
Tecnolo ecnologia ENGAGED ON PAPER ELECTRONIC AUTOMATION FIELD, SINCE EVER, SAEL HAS REBUILT THE 350-2150 DD2 SINCHRO JAGEMBERG SHEETER DATED 1999 AT PAPIERGARDA PLANT.THE OLD CABINETS HAVE BEEN RENEWED,
More informationLarge Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock & Consumables
Stanref International Ltd, Pressure (Ends: 2018-04-24 14:00:00.0) Vessel Manufacturing Equipment.(Further lots to be added) Large Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock
More informationMechanical Engineering
Mechanical Engineering Stepper Motor Drive Full step controlling of stepper Motor Single step, low and high speed, Forward and Reverse Small stepper Motor with driver and Power Circuit Necessary Power
More informationLinear gantries Key features
Key features At a glance A linear gantry (YXCL) is an assembly of several axis modules (EHM /DHMZ) to produce a movement in 2D space. Ideal for long gantry strokes and heavy loads High mechanical rigidity
More informationSeismic Engineering Research Infrastructures for European Synergies. JRA1: Small Lab Experience. Iasi 13th July 2009
Seismic Engineering Research Infrastructures for European Synergies Structural Dynamics Research Group Department of Engineering Science University of Oxford JRA1: Small Lab Experience Iasi 13th July 2009
More informationInnovative Motion Control Solutions for Industry
Innovative Motion Control Solutions for Industry Worldwide Offices and Alliance Partners Franksville, WI Canada England Germany Michigan Venezuela Peoples Republic of China Japan Unico Test Stand Expertise
More informationCHAPTER 4 VARIABLE COMPRESSION RATIO ENGINE WITH DATA ACQUISITION SYSTEM
57 CHAPTER 4 VARIABLE COMPRESSION RATIO ENGINE WITH DATA ACQUISITION SYSTEM 4.1 GENERAL The variable compression ratio engine was developed by Legion brothers, Bangalore, India. This chapter briefly discusses
More informationSystem Engineering for the Battery Industry. Electric mobility.
System Engineering for the Battery Industry Electric mobility. 2 3 Extensive experience, a global leader with close proximity to the customers. thyssenkrupp System Engineering is an internationally acting
More informationMaking a Safer World Through Accuracy and Precision. Product Bulletin
Making a Safer World Through Accuracy and Precision Product Bulletin Follow us on Twitter @mountztorque PB # 0058 October 2014 www.mountztorque.com HD-Series Torque & Automation Control System The Mountz
More informationThree-dimensional gantries
Key features At a glance A three-dimensional gantry (YXCR) is an assembly of several axis modules (EHM /DHMZ) to produce a movement in 3D space. Can be used universally for handling light to very heavy
More informationTHERMODYNAMICS. T85D - Internal Combustion Engine Test Bed
THERMODYNAMICS T85D - Internal Combustion Engine Test Bed 1. General Didacta s T85D Internal Combustion Engine Test Bed has been specially designed for use in testing laboratories, and to ensure the greatest
More informationSingle-axis systems Key features
Key features At a glance A single-axis system (YXCS) is an axis module (EHM ) for any single-axis movement. Ideal for long gantry strokes and heavy loads High mechanical rigidity and sturdy design Use
More informationInnovative Testing Equipment. Series DF torque sensors
Innovative Testing Equipment Series DF torque sensors The DF sensor ATESTEO is the leading specialist for drivetrain testing combined with component validation, vehicle measurement technology, and engineering
More informationExperimental Measurement of Frictional Torque in End Pivoted Roller Finger Follower Valve Train
ISBN 978-93-84422-76-9 6th International Conference on Developments in Engineering and Technology (ICDET-2017) Bangkok (Thailand) Feb.6-7, 2017 Experimental Measurement of Frictional Torque in End Pivoted
More informationJCB FASTRAC 2155/2170
ABS BRAKING FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB SMOOTHSHIFT TRANSMISSION. C A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 m (ft-in) A Height to cab 2.88 (9-5) B
More informationSP4 DOCUMENTATION. 1. SP4 Reference manual SP4 console.
SP4 DOCUMENTATION 1. SP4 Reference manual.... 1 1.1. SP4 console... 1 1.2 Configuration... 3 1.3 SP4 I/O module.... 6 2. Dynamometer Installation... 7 2.1. Installation parts.... 8 2.2. Connectors and
More informationKnight Servo Systems. Servo Hoist Articulating Extension Arm Floor. Servo Tractor with Z Control Combines X,Y and Z movements in one handle.
s Knight Servo Systems Knight Servo Systems are Intelligent Assist Devices (IAD) that provide controlled transfers of workloads. Various programmable options allow for multiple product functions. Traditional
More informationInventory # Lot # Lead
2125800 5 Transformer Cooler 2125801 6 Valves 2125802 7 Globe Valve 2125803 8 Check Valve 2125804 9 Flow Control Valve 2125805 10 Tricentic Valves 2125806 11 Gate Valve 2125807 12 Gate Valves 2125808 13
More informationAir-Cooled Eddy Current ED Series Engine Dynamometers
Air-Cooled Eddy Current ED Series Engine Dynamometers ED Series Air-Cooled Engine Dynamometers Mustang s ED Series Air-Cooled Engine Dynamometers are the answer for most engine testing applications due
More informationJCB FASTRAC 3200/3230
FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB SMOOTHSHIFT TRANSMISSION. STATIC DIMENSIONS A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 495/70R24 A Height to exhaust 3.15
More informationWhat is a Dynamometer. Dynamometer is an apparatus for measuring the mechanical power generated, or absorbed by a rotating machine
What is a Dynamometer Dynamometer is an apparatus for measuring the mechanical power generated, or absorbed by a rotating machine Modes of Operation Loading resisting the motion of a rotating device. Motoring
More informationTorque transducers the complete range for all tasks. Sensors and transducers
Torque transducers the complete range for all tasks Sensors and transducers HBM torque transducers High quality as standard For over fifty years we have been the specialists in the electrical measurement
More informationDESIGN AND EXPERIMENTATION OF TEST RIG TO CHARACTERIZE HYDROSTATIC DRIVEFOR LINEAR ACTUATOR
DESIGN AND EXPERIMENTATION OF TEST RIG TO CHARACTERIZE HYDROSTATIC DRIVEFOR LINEAR ACTUATOR Sherif Elbaz 1, Moatasem 2, Ibrahim 3, Nabila 4, Mohamed 5 1 Automotive Engineering Department, Ain-Shames University,
More informationRETROFIT OF A ROLLER BRAKE TESTER AT FAMENA
Mladen Božić Ante Vučetić Petar Ilinčić Zoran Lulić ISSN 1333-1124 eissn 1849-1391 RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA Summary UDC 629.3.017/018 The vehicle brake tester described in this paper
More informationFront longitudinal engine, rear mounted six speed automatic transmission coupled with separate rear differential module, rear wheel drive
Aston Martin Lagonda DB9 (automatic) Front longitudinal engine, rear mounted six speed automatic transmission coupled with separate rear differential module, rear wheel drive Rear limited slip differential
More informationSCHMIDT ManualPress 300 Series
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationSteering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2
Steering Test Rigs The World of Steering Test Machines Steering column assemblies, are by their nature extremely safety critical, thus the ability to test them accurately and repeatedly is extremely important.
More informationLinear gantries Key features
Key features At a glance A linear gantry (YXCL) is an assembly of several axis modules (EHM /DHMZ) to produce a movement in 2D space. The linear gantry facilitates movement in 2D space. Depending on the
More informationBRAND NAME LISTING. Gear pumps and motors, directional control. valves. AGA approved industrial and commercial gas hose assemblies.
ALFA ENGINEERING ALFORD BRAND NAME LISTING ALLIED HEAT TRANSFER AUBURN GEAR ASTM BAKER HYDRAULICS BOSCH BREVINI CEJN CENTAFLEX CESSNA CHARLYNN CHELSEA Specialist hydraulic fittings and adaptors. Agricultural
More informationEnvironmental Lab Tour Lab Overview
Environmental Lab Tour Lab Overview Keystone Compliance s environmental test laboratory offers a well-lit, clean, temperature-controlled environment. The lab is powered by 2,000 amps, 480 volts of electrical
More informationLinear Flexible Joint Cart Plus Single Inverted Pendulum (LFJC+SIP)
Linear Motion Servo Plants: IP01 and IP02 Linear Flexible Joint Cart Plus Single Inverted Pendulum (LFJC+SIP) User Manual Table of Contents 1. Linear Flexible Joint Cart Plus Single Inverted Pendulum System
More informationContents. Preface... xiii Introduction... xv. Chapter 1: The Systems Approach to Control and Instrumentation... 1
Contents Preface... xiii Introduction... xv Chapter 1: The Systems Approach to Control and Instrumentation... 1 Chapter Overview...1 Concept of a System...2 Block Diagram Representation of a System...3
More informationPlanar surface gantries
Key features At a glance The planar surface gantry facilitates movement in 2D space. Depending on the requirements, the gantry is either composed of several axis modules (YXCF) or using the planar surface
More informationIndustrial Machinery & Equipment > Maynards Industries (1991) Inc > Electrolux Canada Corp Online. MasterLock Lock Box. Lot #7 (Sale Order 7 of 112)
Industrial Machinery & Equipment > Maynards Industries (1991) Inc > Electrolux Canada Corp Online Electrolux Canada Corp Online by Maynards Industries (1991) Inc Event Begins: Tuesday, June 2, 9:00 AM
More informationCHARITY AUCTION CLEARING SALE ALL PROCEEDS TO THE LOOKOUT RESIDENTIAL REHAB CENTRE
1. 7 Piece table setting 2. 5 Green slider chairs 3. 5 Green slider chairs 4. 5 Green slider chairs 5. 5 Green slider chairs 6. 5 Green slider chairs 7. 5 Black chairs 8. 3 Gas office chairs (brown) 9.
More informationUpgrading the Sure Coat Modular Gun Control System
Instruction Sheet P/N 007365B Upgrading the Sure Coat Modular Gun Control System WARNING: Read the Safety section in the Sure Coat Modular Gun Control System manual before performing any of the following
More informationThe new Unimog. Technical information U 4023/U 5023.
The new Unimog. Technical information U 4023/U 5023. Dimensions and weights. Technical drawing for U 4023 BlueTec 6, model designation 437.427 2345 23 Possible body lengths 4100 Front edge of body 70 120
More information3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS
17 3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS 3.1. INTRODUCTION The earthquake simulator is a system that consists of several components which must be designed to effectively work together. Each
More informationWeatherproof Tubular Slip Ring Assembly
Weatherproof Tubular Slip Ring Assembly Model B8-4.3W 8 circuit weatherproof slip ring Compact design Mounts on shafts up to 4.3 [109.2 mm] in diameter Permanently lubricated bearings Rugged stainless
More informationMECHATRONICS LAB MANUAL
MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and
More informationStromag Dessau. safety in motion PRODUCT CATALOGUE. NFF4F-LS Brake. for Slow-Running High Torque Drivelines, in harsh environment
Stromag Dessau safety in motion PRODUCT CATALOGUE NFF4F-LS Brake for Slow-Running High Torque Drivelines, in harsh environment ENGINEERING THAT MOVES THE WORLD Applications Holding brake variations with
More informationDemag DCS-Pro chain hoist Demag DCMS-Pro Manulift. With infinitely variable speed control
Demag DCS-Pro chain hoist Demag DCMS-Pro Manulift With infinitely variable speed control Infinitely variable speed control for even faster and more precise handling Demag chain hoists with infinitely variable
More informationAn Introduction to Fatigue Testing Equipment, Test Setup & Data Collection
An Introduction to Fatigue Testing Equipment, Test Setup & Data Collection Lisa Goodwin Servohydraulic Sales Specialist & Market Manager - Instron The difference is measurable 1 Themes.. Certainty of Measurement
More informationCURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) GANPAT UNIVERSITY
ANNEXURE - A CURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) Host Institute: GANPAT UNIVERSITY Contents of Basic Industrial Pneumatics -----------------------------------------------------------------------------------------------------------------
More informationSTI LVDT Displacement Sensors
STI LVDT Displacement Sensors The LVDT Still the most reliable and widely used displacement transducer available today. The best performance to cost ratio of any of its rival products in today s market.
More informationGuaranteed Technical Particulars(GTP) Deviation/Remarks Specify if any. Computerized Motor testing system suitable to test LV 3 phase motors
Section II - Technical Specification Tender Enquiry No: BUY/EATD(BEE)-01/12-13 Name of the Equipment: MOTOR TESTING SYSTEM Note: The Offers should be submitted only in this format otherwise the offer will
More informationChallenges of Precision Testing of EV Drives
Challenges of Precision Testing of EV Drives Future Powertrain Conference 2017 David Meek (M.Eng and Man) Chief Engineer 1 st March 2017 What We Do What We Do Everyday Where Which Economic Sectors Assurance
More informationPOWERSPORTS DYNAMOMETER HARDWARE AND SOFTWARE
POWERSPORTS DYNAMOMETER HARDWARE AND SOFTWARE DYNOWARE RT DYNAMOMETER HARDWARE DYNOWARE RT THE NEXT GENERATION OF DYNOJET DYNAMOMETER ELECTRONICS AND SOFTWARE HAS ARRIVED. DynoWare RT is the next generation
More informationTesting Energy Storage Systems: From EVs to Utility Grid
Testing Energy Storage Systems: From EVs to Utility Grid Jonathan P. Murray Business Development Manager 2008 Bloomy Controls. All Rights Reserved Agenda Energy storage system landscape Electric vehicle
More informationIndustrial Bay International Auctions
Industrial Bay International Auctions Industrial Equipment, Diesel Engines and Generators Ended 15 nov. 2017 3:04 EST (8:04 GMT) Online Only Cambridge Ontario Cambridge Canada Lot Description 1 Rolls of
More informationInstallation & Calibration
Installation & Calibration ED2E Elite SkidWeigh System Lift Truck On-board Weighing Scale ED2-Elite V1.0 General Installation Guide This ED2-Elite SkidWeigh system installation & calibration guide describes
More informationQH331 CONE CRUSHER FEATURES & BENEFITS. Rev Rev
CONE CRUSHER FEATURES & BENEFITS Rev 2 23-03-15 Rev 1 01-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Standard features Options Benefits overview 2 HOPPER DOORS Heavy
More informationMRO Systems and Retrofits for Industrial & Manufacturing Applications
www.cmafh.com MRO Systems and Retrofits for Industrial & Manufacturing Applications Hello! Are you aware that CMAFH serves the MRO industry with custom designed systems and retrofits relating to fluid
More information5TH CATEGORY - HISTORIC RACING. GROUP Sc APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Sc APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More information10 1 Oxy Acetylene Hoses and Accessories Including Gauges, Torches & Trolley Bailey Extension Ladder 150Kg Capacity, 23 Step
1 1 Uni-Mig AW2002 Mig Welder Portable 2 1 WIA Weldmatic 335 Mig Welder 3 1 CIG Professional Welder 4 1 Work Bench Portable, with Weldmatic 2RD Remote Wire Feed Unit Serial No: C440 1201088 On Trolley
More informationMain Gearbox Testing for Light Utility Helicopter of HAL
8 th International Symposium on NDT in Aerospace, November 3-5, 2016 Main Gearbox Testing for Light Utility Helicopter of HAL MURALIDHAR B.S. 1, Bhawani Singh RATHORE 1 More info about this article: http://www.ndt.net/?id=20582
More informationPneumatics & Fluid Control. Industrial Hydraulics & Lubrication. Motion Control & Automation. Mobile Products. Engineered Systems & Services
Pneumatics & Fluid Control Industrial Hydraulics & Lubrication Motion Control & Automation Mobile Products Engineered Systems & Services ENGINEERED SYSTEMS & SERVICES Ball or roller screw integrated motor
More informationNew 2019 Ram 1500 SPECIFICATIONS
New 2019 Ram 1500 SPECIFICATIONS Specifications are based on the latest product information available at the time of publication. All dimensions are in inches (millimeters) unless otherwise noted. All
More informationNIBTORQUE Pty Ltd 2015 PRICE LIST VALID UNTIL DECEMBER
NIBTORQUE Pty Ltd 2015 PRICE LIST VALID UNTIL DECEMBER 30 2015 PRICE SHEET = VERSION 1.3 PISTOL GRIP STYLE PNEUMATIC GEAR DRIVEN TORQUE TOOLS 2015* MADE IN GERMANY = 12 MONTH WARRANTY PRICE INCLUDES FRL
More informationLINEAR ACTUATOR MODULE Page 5-1. Table Of Contents
LINEAR ACTUATOR MODULE Page 5-1 Table Of Contents Section Description Page # 5. Linear Actuator Module... 5-2 5.1 Description... 5-2 5.2 Operation... 5-2 5.2.1 Sensors... 5-3 5.2.1.1 Linear Sensor... 5-3
More informationReplace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
More informationAgenda 10/4/2016. Servo Technology Experience 2016 TO (Nashville) SERVE, TO STRIVE, WITHOUT COMPROMISE.
Servo Technology Experience 2016 (Nashville) Agenda Why transfers? Transfer Technology History How Transfer s Integrate with Presses Transfer Tooling Options Auxiliary Tooling & Die Options New Technologies
More informationDevelopment Of A Power Re-Circulating Gear Test Rig
Development Of A Power Re-Circulating Gear Test Rig V. Manoj, K. Gopinath and G.Muthuveerappan Dept. of Mech. Engg. IIT Madras, Chennai-600 036 manoj_v98@yahoo.com / gopinath@iitm.ac.in ABSTRACT In order
More information96.0 x 83.0 (3.78 x 3.27)
2013 Jeep Grand Cherokee All dimensions are in millimetres (inches) unless otherwise noted. All dimensions are measured at curb weight with standard wheels and tires unless otherwise noted. NOTE: Information
More informationdspace GmbH Rathenaustr Paderborn Germany dspace Technology Conference Workshop #2
dspace Engineering - Mechatronic Test Benches Matthias Deter Group Manager Engineering E-Drive Applications dspace Technology Conference 2017 Workshop #2 dspace GmbH Rathenaustr. 26 33102 Paderborn Germany
More informationDATUM ELECTRONICS RS425 NON-CONTACT TORQUE TRANSDUCER PRODUCT OVERVIEW
DATUM ELECTRONICS LIMITED TELEPHONE: +44 (0) 1983 28 28 34 FAX: +44 (0) 1983 28 28 35 EMAIL: support@datum-electronics.co.uk WEB: www.datum-electronics.co.uk DATUM ELECTRONICS RS425 NON-CONTACT TORQUE
More information3/3-Way-Proportional Valve
3/3-Way-Proportional Valve Content Page General Description 1 Design 2 Function 2 Technical Data 3 Options 4 Dimensions 5 Accessories 6 Flow Curves 7 General Description This proportional valve in combination
More information8R/8RT Series Tractors 224 to 298 kw (305 to 405 hp) 97/68 EC with Intelligent Power Management
8R/8RT Series Tractors 224 to 298 kw (305 to 405 hp) 97/68 EC with Intelligent Power Management 34 8R Series Tractors Specifications 8R Series Tractors Specifications ENGINE PERFORMANCE COUNTRIES to select
More informationJBI Docupunch P33 Automatic Punch
JBI Docupunch P33 Automatic Punch Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com TABLE OF CONTENTS SECTION I: INSTALLATION & TESTING: 1) Uncrating, Inspection & removal
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationA. General Specifications. B. Dimensional Layout. BTU International Specification: Model 150Nz12 Reflow Solder System Date: 11/05/09 Page: 1/6
Page: 1/6 A. General Specifications Maximum temperature rating (all zones): 350 C Nominal operating temperature: 80-350 C Number of controlled heated zones: 12 Top 12 Bottom Oven atmosphere: Air/N 2 Working
More informationCamshaft Torque Analysis of Diesel Engine
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2017 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Swapnil
More informationSERVICE PARTS for MCC XCELSIOR SERIES T -367PL REV. 02/ Mobile Climate Control
T--367PL Manual SERVICE PARTS for MCC XCELSIOR SERIES 50-2104 T -367PL REV. 02/2015 PARAGRAPH NUMBER TABLE OF CONTENTS INTRODUCTION... II MODEL/SERIAL NUMBER PLATE LOCATION... II MODEL CHART... II ORDERING
More informationSpearhead Excel 565, 605 & 645T
1 Spearhead Twiga 5000, 6000, 6000LR & 6000 T Parts Book 11 th Edition February 2010 Green-Tec A/S Merkurvej 25 DK 6000 Kolding Tel: +45 7555 3644 Fax: +45 7555 4243 www.greentec.eu info@greentec.eu Spearhead
More informationW O R K B O AT R A N G E
WORKBOAT RANGE Engine Range Workboat Engine Range February 2014 Engine Model 20WB 30WB 40WB 50WB 70WB 85WB 130WB Cylinders 3 3 4 4 4 4 6 Horsepower 20 30 40 50 70 85 130 RPM 2800 3000 2600 3000 2500 2500
More informationELECTRIFICATION TESTING SYSTEMS
ELECTRIFICATION TESTING SYSTEMS AVL ITA - 5 Luglio - Circuito Tazio Nuvolari Luigi Giordano AVL List GmbH (Headquarters) AVL DEVELOPMENT SYSTEMS FOR ELECTRIFICATION Dedicated application team since 2011
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationBG45 BG65S BG75 Axial Parallel Axial Parallel Axial Parallel CASM-32 (LS/BS/BN) X X CASM-40 (LS/BS/BN) X X X X CASM-63 (LS/BN/BF) X X
1 System Overview CASM electric cylinders powered by brushless DC motors are ideally suited for fast and powerful movements. Replacement of pneumatic cylinders has never been easier. Just parameterize
More informationMTS Criterion Series 40 Specifications - Comparative
MTS Criterion Series 40 Specifications - Comparative Model 41 Model 42 Model 43 Model 44 C41.103 C42.503 C43.104 C43.304 C43.504 C44.104 C44.304 Maximum Rated kn 1 5 10 30 50 10 30 Force Capacity lbf 220
More informationD4: Racing Infrastructure
Section D: Racecourse Facilities D4: Racing Infrastructure Issued: July 1, 2004 Greyhound Racing NSW Quad 2, Level 2, 8 Parkview Drive Homebush Bay NSW 2127 Correspondence Locked Bag 170 Concord West NSW
More informationInstrumentation. Visit Us Online WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS For Panel Fabricators
WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS. Moody Price LLC moodyprice@moodyprice.com 225-767-7755 225-763-6005 18320 Petroleum Drive, Baton Rouge, LA 70809 Visit Us Online 800-272-9832 Instrumentation
More informationArticulated Truck TA 230
Articulated Truck TA 230 litronic` Operating Weight: 23,300 kg Engine Output: 270 kw / 367 HP Dump Body Capacity: 19.0 m 3 Payload: 30,000 kg Technical Data Engine Liebherr Diesel Engine D 936 L A6 Design
More information