Infinity. Vista Patient Monitor. Because you care

Transcription

1 Infinity Vista Patient Monitor The Infinity Vista patient monitor offers basic monitoring in a compact, lightweight format. Designed for low- to mid-acuity monitoring, the standard configuration includes a 4-channel display, the essential vital signs parameters, and basic arrhythmia. The Vista monitor can be expanded with wireless networking, one or two IBP channels, advanced arrhythmia, and ST segment analysis. An optional lithium-ion battery provides three hours of battery life. Features Supports low to mid-acuity patients Expands with advanced monitoring features and wireless networking Offers 3-hour battery option TECHNICAL DA T A Monitoring Capabilities Neonatal, pediatric and adult applications ECG Available leads 3-lead set Leads: I, II, III 5-lead set Leads: I, II, III, avr, avl, avf, V 6-lead set Leads: I, II, III, avr, avl, avf, V, V+ 15 to 300 bpm ±5 bpm or ±2% (whichever is greater) Frequency range (±3 db) 0.5 Hz to 28 Hz (50 Hz) 0.5 Hz to 40 Hz (60 Hz) Filter frequency 50 to 60 Hz QRS Detection Range Alarms Pacer detection Accessories User-selectable upper and lower limits Leads: I and II or III Amplitude: ±5 to ±700 mv Separation between pulses: 30 msec Width (dp): 0.1 to 2.0 msec 3-, 5- or 6-lead electrode set Emergency Care Perioperative Care Critical Care Perinatal Care Home Care Because you care

2 Dual Lead ST Analysis Available leads Default leads ECG complex length Sample rate Units of measure Minimum number of beats Resolution Trends Upper and lower ST alarms Isoelectric measurement point Default Respiration Sensing lead Measuring method Auxiliary current Detection threshold Alarms Pulse Oximetry (SpO 2 ) Displayed parameters Measuring method Alarms Accessories Choice of any two leads II, V (if used with MultiMed 5 or 6 lead) 900 msec 250 samples/sec. mm and mv, with a default of mm One required in updated interval ±0.1 mm/±0.01 mv < ±1 mm/±0.1 mv (RTI with respect to input) Graphical and tabular, as provided by monitor function mm to mm in 0.1 mm increments mv to mv in 0.01 mv increments Start of ECG complex to fiducial point -15 to +15 mm or -1.5 to +1.5 mv QRS onset 28 msec II Impedance pneumography 10µA for any active electrode 0.2Ω to 4.0Ω in manual mode (user adjustment) 0.2Ω to 1.5Ω in auto mode (automatic adjustment) 0 to 155 breaths/min ±1 breath/min or ±2% (whichever is greater) User-selectable upper and lower respiration rate Saturation (fraction of oxyhemoglobin to functional hemoglobin) and pulse (rate and curve) Absorption spectrophotometry Pulse: 30 to 250 bpm SpO 2 : 0 to 69% not specified SpO 2 : 70 to 100% ±2% (except Masimo LNOP-Ear which is ±3.5% and Nellcor DS100A which is ±3%) Saturation accuracy range increases by ±1 digit for neonates Pulse: ±3 bpm or ±3% (whichever is greater) User-selectable upper and lower limits for SpO 2 and pulse rate Dräger Medical-approved Masimo and Nellcor sensors

3 Temperature Displayed parameters Alarms Accessories Absolute temperature 0 to 50 C Probe: ±0.1 C System: ±0.2 C User-selectable upper and lower limits Dräger Medical-approved core and skin probes Noninvasive Blood Pressure (NBP) Displayed parameters Measuring method Modes of operation Systolic, mean and diastolic pressures Oscillometric utilizing step deflation Manual (single measurement) or interval Interval times Off, 2, 2.5, 3, 5 (increments of 5), 30, 45, 60, 120, 240 minutes (default) Adult (270 mmhg) Pediatric (180 mmhg) Neonatal (140 mmhg) Heart rate: 30 to 240 bpm Systolic: 30 to 250 mmhg Mean: 20 to 230 mmhg Diastolic: 10 to 210 mmhg Heart rate: 30 to 240 bpm Systolic: 30 to 170 mmhg Mean: 20 to 150 mmhg Diastolic: 10 to 130 mmhg Heart rate: 30 to 240 bpm Systolic: 30 to 130 mmhg Mean: 20 to 110 mmhg Diastolic: 10 to 100 mmhg Cuff pressure Default inflation pressure Adult: 160 mmhg ±10 mmhg Pediatric: 120 mmhg ±10 mmhg Neonatal: 110 mmhg ±10 mmhg Inflation pressure after a valid measurement Adult: Systolic +25 mmhg ±10 mmhg Pediatric: Systolic +25 mmhg ±10 mmhg Neonatal: Systolic +30 mmhg ±10 mmhg Maximum inflation pressure Adult: 265 mmhg ±5 mmhg Pediatric: 180 mmhg ±10 mmhg Neonatal: 142 mmhg ±10 mmhg Minimum inflation pressure Connector Adult: 110 mmhg ±10 mmhg Pediatric: 90 mmhg ±10 mmhg Neonatal: 70 mmhg ±10 mmhg Quick-release connector with single airway

4 Invasive Blood Pressure (optional) Displays up to 2 pressures (with IBP options) Measuring method Resistive strain gauge transducer Display resolution 1 mmhg -50 to 399 mmhg Frequency range DC to 16 Hz Zero balance range ±190 mmhg Transducer specifications Dräger Medical-approved transducers with a resistance of 300Ω to 2000Ω and an equivalent pressure sensitivity of 5µV/V/mmHg ±10% ±2 mmhg or ±3%, (whichever is greater) after successful zero and calibration (exclusive of transducer) IBP alarms User-selectable upper and lower limits for systolic, diastolic and mean pressures Accessories Dräger Medical-approved pressure transducers Display Specifications Type Size Channels Viewing area Resolution Thin Film Transistor-Liquid Crystal Display Active Matrix (TFT-LCD) 21cm (8.4 in.) diagonal 4 standard mm x mm 640 x 480 pixels User Interface Rotary knob for selection and confirmation of changes Easy-to-use menu structure and fixed keys Three alarm levels Life-threatening, Serious and Advisory Physical Specifications Cooling Size (H x W x D) Weight Convection (no fan) 196 x 267 x 147 mm (7.7 x 10.5 x 5.8 in.) 3.32 kg (7.32 lbs.) without battery Information Management Capabilities Data storage Data resolution Trend tables Trend graphs Trend type Electrical Specifications 24 hours 60 seconds 1, 5, 15, 30 or 60 minute display formats 1, 2, 4, 8 or 12 hour display formats Tabular and graphical tables and event recalls (10 events) Input voltage 11 to 14V DC, 2.5A Power consumption 52 watts (fully loaded) Patient leakage current 10µA Protection class Internally powered (per IEC )

5 Power adapter Power requirements 100 to 120V AC, 0.8A 200 to 240V AC, 0.4A Frequency 50 to 60 Hz Chassis leakage current Battery Specifications 300µA at 110V AC and 60 Hz 500µA at 220V AC and 50 Hz Internal battery Battery type: lead-acid Battery capacity: 75 minutes Charging time: 5.5 hours at 25 C External auxiliary battery Battery type: Lithium-ion Battery capacity: Minimum 180 minutes Charging time: 8 hours at 25 C Battery life is specified under the following conditions: NBP measurement every 15 minutes connected and running at 25 C Battery life may diminish after extended use. Environmental Requirements Temperature range Relative humidity Atmospheric pressure Operating: 0 C to 45 C (without recorder) Storage: -20 C to 50 C Operating: >10% and <95%, non-condensing Storage: >10% and <95%, non-condensing Operating: 525 to 795 mmhg (70 to 106 kpa) Storage: 375 to 795 mmhg (50 to 106 kpa) Standards IEC and applicable particular and collateral standards, IEC , Electromagnetic compatibility CISPR 11, Class B The Infinity Vista monitor complies with Medical Devices Directive (MDD) 93/42 EEC and bears the CE mark.

6 Ordering Information Infinity Vista or Infinity Vista with R , MU20539, Power AC power adapter (100V 240V AC) (included with monitor) MS18508 Power Cables Europe, CEE North America, 5-15R Switzerland, SEV Great Britain, BS Australia, New Zealand, AS China, power cord Danish power cord MultiMed Pods MultiMed Multi-parameter pod to monitor 3-, 5- or 6- lead ECG, impedance respiration, temperature and SpO 2 MultiMed Multi-parameter pod to monitor 3-, 5- or 6- lead ECG, impedance respiration, temperature and SpO 2 NeoMed The NeoMed pod supports monitoring of 3-lead ECG, impedance respiration, temperature and SpO 2. (FiO 2 not supported.) SpO 2 Pod Masimo SET SpO 2 SmartPod Kit (see individual datasheet for details) Software Options Vista 1st invasive blood pressure (IBP1) Vista 2nd invasive blood pressure (IBP2) Vista OCRG Vista dual-lead ST-segment analysis Vista full arrhythmia Vista wireless networking VF6 Plus (for SpO 2 pods) (Option included with new monitor orders) MS16900 MS15069 MS15063 MS15064 MS15065 MS15067 MS15068 MS17038

7 Recorder Options R50 2-channel recorder R50-N 2-channel network recorder Infinity Network laser printer (115V) Infinity Network laser printer (220V) Other Accessories Replacement battery (lead-acid) Lithium-ion battery (180 minute, optional) Battery charger (lead-acid) Mounts Wall mount, 23 cm arm Rolling stand Shelf mount

8 Europe, Middle East, Africa, Latin America, Asia, Pacific: Dräger Medical AG & Co. KG Moislinger Allee Lübeck GERMANY Tel: Fax: USA: Draeger Medical, Inc Quarry Road Telford, PA USA Tel: Toll-free: Fax: Canada: Draeger Medical Canada, Inc. 120 East Beaver Creek Road Suite 104 Richmond Hill Ontario L4B 4V1 CANADA Tel: Toll-free: Fax: Manufacturer: Draeger Medical Systems, Inc. Telford, PA USA The quality management system at Draeger Medical Systems, Inc. is certified according to ISO 13485, and Annex II of Directive 93/42/EEC (Medical devices). Note: Limited Availability The Infinity Vista monitor is available in selected markets only. It is not available in the US, Canada, Western Europe, Australia or Japan. Contact your local sales representative for details. Masimo is a registered trademark of Masimo Corporation Nellcor is a registered trademark of Nellcor Puritan Bennett Inc. PDF1120 / / gt / Subject to modifications / 2007 Dräger Medical AG & Co. KG