Residential Standby Power

Transcription

1 Residential Standby Home Connected/Home Protected Products and Systems.1 Transfer Switch Panels Product Description Application Description Features, Benefits and Functions Standards and Certifications Reference Information Product Selection Accessories Technical Data and Specifications Dimensions Portable Generators Product Selection Dimensions Standby Generator System Product Description Application Description Features, Benefits and Functions Standards and Certifications Number Selection Product Selection Technical Data and Specifications Dimensions Automatic Transfer Switches Product Description Application Description Standards and Certifications Product Selection Dimensions Volume 1 Residential and Light Commercial CA E December

2 .1 Residential Standby Transfer Switch Panels All Panels are Manufactured in the USA and Meet UL 1008 Product Description A transfer switch panel is a device that is mounted next to the loadcenter (distribution panel) in the home or small business. The transfer switch panel is used in conjunction with an emergency generator and serves the purpose of turning selected circuits on and off during a power outage. The transfer switch panel allows the owner to start up a generator and then restore power to critical circuits when utility power is not available. The owner designates which circuits are critical, such as their refrigerator and certain lights. Sometimes called emergency power panels, emergency generator panels, gen. panels, transfer switches or emergency panels; transfer switch panels provide the homeowner or small business owner with a safe and easy way to continue using electrical appliances when the utility power is unavailable. Application Description Transfer switch panels are most often used in residential, agricultural and light commercial applications. Comfort and safety are key concerns of many homeowners who are dependent on an uninterrupted supply of electricity. The increase in our dependence on power is due in part to the popularity of home offices and in-home health care. Various heavily populated regions of the United States experience periodic power outages due to extreme weather conditions, such as ice and snowstorms, heat waves, tornadoes or hurricanes. These regions that include the Pacific Northwest, Atlantic Coast and the Gulf Coast are the strongest markets for portable generators and Transfer Switch Panels. Contents Description Page Transfer Switch Panels Standards and Certifications Reference Information Product Selection Accessories Technical Data and Specifications Dimensions Learn Online Features, Benefits and Functions Eaton offers two unique emergency power solutions: Manual transfer switches Emergency generator panels Manual Transfer Switches Panel and components sold separately Hardwired generator connection Ideal for new construction/ larger loads Sturdy copper bus construction Types (CH and CHNT) breakers are sold separately Mechanically interlocked main disconnects to prevent paralleling of normal and emergency power source Indoor and outdoor designs offered Indoor Design Indoor/Outdoor Design 108 Volume 1 Residential and Light Commercial CA E December

3 Residential Standby Transfer Switch Panels.1 Emergency Generator Panels Panel and components sold separately Plug-in generator connection All circuit breakers are included switching duty rated Includes dual wattmeters for load balancing Mechanically interlocked main disconnects prevent paralleling of normal and emergency power source Indoor and outdoor designs offered Indoor Design Outdoor Design Standards and Certifications UL 67 listed UL 1008 listed Reference Information Cross-Reference Watts Number of Circuits Ampere Rating Number Eaton Gen/Tran EmerGen Square D Generac CH48GEN060R QO48M0DSGP 15, CH816GEN6060 QO48M60DSGP CH6EGEN CH6EGEN2060R R RTE CH6EGEN2060SU CH6EGEN2060RSU CH10EGEN CH10EGEN060R R RTE CH10EGEN060SUR CH10EGEN060RSU CH10GEN500SN CH10GEN500RSN 12, CH10GEN5050SN 12, CH10GEN5050RSN Notes Gen/Trans device is not supplied with a power cord. Generac device is 7200 maximum watts on six-circuit device and 12,000 maximum watts on 10-circuit device. Volume 1 Residential and Light Commercial CA E December

4 .1 Residential Standby Transfer Switch Panels Product Selection Warranty Manual Transfer Switch 15-year loadcenter warranty Lifetime branch breaker warranty Transfer Switch and Generator Panel Selection Extend the warranty to 20 years by purchasing an emergency generator panel with surge protection Emergency Generator Panel 15-year loadcenter warranty Lifetime branch breaker warranty Extend the warranty to 20 years by purchasing an emergency generator panel with surge protection Accessories Accessories Description Flush flange kit (for use with emergency generator panel only) Enclosure Type Watts Number of Circuits Standard Manual Transfer Switch Ampere Rating Main/ Emergency Ampere Rating Feeder Breakers Included Accessories Number NEMA R Provision Provision None CH48GEN060R NEMA 1 10, Provision Provision None CH816GEN6060 Emergency Generator Panel NEMA /20 5 1P151 1P20 None CH6EGEN2060 NEMA R /20 5 1P151 1P20 None CH6EGEN2060R NEMA /20 5 1P151 1P20 Two-pole surge protector CH6EGEN2060SUR NEMA R /20 5 1P151 1P20 Two-pole surge protector CH6EGEN2060RSU NEMA /0 6 1P152 1P2012P0 None CH10EGEN060 NEMA R /0 6 1P152 1P2012P0 None CH10EGEN060R NEMA /0 7 1P152 1P2012P0 Two-pole surge protector CH10EGEN060SUR NEMA R /0 7 1P152 1P2012P0 Two-pole surge protector CH10EGEN060RSU Switched Neutral Manual Transfer Switch NEMA /0 6 1P15, 2 1P20, 1 2P0 None CH10GEN500SN NEMA R /0 6 1P15, 2 1P20, 1 2P0 None CH10GEN500RSN NEMA 1 12, /50 6 1P15, 2 1P20, 1 2P0 None CH10GEN5050SN NEMA R 12, /50 6 1P15, 2 1P20, 1 2P0 None CH10GEN5050RSN Ampere Rating Number CHEGENFKIT 25-foot (7.62m) power cord 0 CHGENCORD0 inlet box 20 EGSPIB20 inlet box 0 EGSPIB0 110 Volume 1 Residential and Light Commercial CA E December

5 Residential Standby Transfer Switch Panels.2 Technical Data and Specifications 10,000 AIC rating Switching devices must be circuit breakers Transfer switch panel must be supplied with neutral and ground inlet box must include a circuit breaker for generator protection Installation Diagrams Manual Transfer Switches Indoor Installation Diagram Eaton Emergency Panel/ Manual Transfer Switch Inlet Box* Cord* Generator* Manual Transfer Switches Outdoor Installation Diagram Eaton Emergency Panel/ Manual Transfer Switch Inlet Box* Cord* Generator* Dimensions Approximate Dimensions in Inches (mm) Manual Transfer Switch Hardwired Electrical Connection* Hardwired Electrical Connection* Enclosure Type Height Width Depth Utility Feed Existing Main Panel (Loadcenter) Two-Pole, 60A Breaker* to Feed the Emergency Panel From Your Existing Main Panel (Loadcenter) Not Included * Utility Feed Existing Main Panel (Loadcenter) Two-Pole, 60A Breaker* to Feed the Emergency Panel From Your Existing Main Panel (Loadcenter) * Not Included Weight Lbs (kg) NEMA (425.5) 14.1 (6.5).88 (98.5) 25 (11) NEMA R 1.00 (0.2) (279.4).56 (90.4) 14 (6) Emergency Generator Panels Indoor Installation Diagram Inlet Box* Cord* Generator* Electrical Wiring or Cord* Emergency Generator Panels Outdoor Installation Diagram Two-Pole, 60A Breaker* to Feed the Emergency Generator Panel From Your Existing Main Panel Utility Feed Generator* Emergency Generator Panel Emergency Generator Panel Prewired Connector for Faster Installation - Included Emergency Generator Panel Enclosure Type Height Width Depth *Not Included Utility Feed Existing Main Panel (Loadcenter) Two-Pole, 60A Breaker* to Feed the Emergency Generator Panel From Your Existing Main Panel (Loadcenter) Prewired Connector for Faster Installation - Included Cord* * Not Included Weight Lbs (kg) Six-Circuit 10-Circuit NEMA (6.0) (289.8) 4.10 (104.1) 24 (11) 26 (12) NEMA R (44.8) 9.45 (240.0) 7.16 (181.9) 29 (1) 1 (14) Volume 1 Residential and Light Commercial CA E December

6 .2 Residential Standby Portable Generators Model 07 Product Selection 572CH 5724CH 576CH 562CH 5625CH 5626CH Portable Generators Running Watts Starting Watts Engine Size and Type Outlets Contents Description Page Portable Generators Dimensions Starting Method Fuel Tank Type and Size Warranty Number cc OHV 2 x 5 20R Recoil Steel, 4.0 gallon 2 year limited 572CH cc OHV 4 x 5 20R Recoil Steel, 4.0 gallon 2 year limited 5724CH cc OHV 4 x 5 20R and 1 x L14 0R Recoil Steel, 6.6 gallon 2 year limited 576CH cc OHV 4 x 5 20R and 1 x L14 0R Recoil Steel, 6.6 gallon 2 year limited 562CH cc OHVI 4 x 5 20R / 1 x L14 0R Recoil Steel, 8.0 gallon 2 year limited 5625CH cc OHVI 4 x 5 20R / 1 x L14 0R Electric/recoil Steel, 8.0 gallon 2 year limited 5626CH 112 Volume 1 Residential and Light Commercial CA E December

7 Residential Standby Portable Generators CH 5681CH 574CH 575CH 5604CH 5605CH 5606CH 5607CH Portable Generators, continued Running Starting Engine Size Starting Fuel Tank Watts Watts and Type Outlets Method Type and Size Warranty Number , cc OHVI 4 x 5 20R / 1 x L14 0R Recoil Steel, 8.0 gallon 2 year limited 5680CH , cc OHVI 4 x 5 20R / 1 x L14 0R Electric/recoil Steel, 8.0 gallon 2 year limited 5681CH 15,000 22, cc OHVI 2 x 5 20R / GFCI 2 x 5 20R / 2 x L5 0R / 1 x L14 0R / 1 x 14 50R / 1 x 10A 12 Vdc 17,500 26, cc OHVI 2 x 5 20R / GFCI 2 x 5 20R / 2 x L5 0R / 1 x L14 0R / 1 x 14-50R / 1 x 10A 12 Vdc Electric Resin, 16.0 gallon 2 year limited 574CH Electric Resin, 16.0 gallon 2 year limited 575CH cc OHVI GFCI 4 x 5 20R / 1 x L14 20R Recoil Steel, 5.0 gallon year limited 5604CH cc OHVI Recoil Steel, 9.0 gallon year limited 5605CH , cc OHVI GFCI 4 x 5 20R / 1 x L14 20R Electric/recoil Steel, 9.0 gallon year limited 5606CH 10,000 15, cc OHVI GFCI 4 x 5 20R / 1 x L5 0R / 1 x 14 50R Electric Steel, 10.0 gallon year limited 5607CH Volume 1 Residential and Light Commercial CA E December

8 .2 Residential Standby Portable Generators Dimensions Approximate Dimension in Inches (mm) Portable Generators Number Length Width Height Weight Lbs (kg) 572CH 2.50 (596.9) (41.8) (444.5) (41.1) 5724CH (647.7) (5.4) (482.6) (46.1) 576CH.50 (850.9) (67.1) (698.5) (81.7) 562CH.50 (850.9) (67.1) (698.5) (84.0) 5625CH.50 (850.9) (67.1) (698.5) (86.) 5626CH.50 (850.9) (67.1) (698.5) (88.5) 5680CH.50 (850.9) (67.1) (698.5) (90.8) 5681CH.50 (850.9) (67.1) (698.5) (9.1) 574CH (121.9) 0.75 (781.1) 8.50 (977.9) 7.00 (169.) 575CH (121.9) 0.75 (781.1) 8.50 (977.9) (181.6) 5604CH 0.00 (762.0) (641.4) (666.8) (74.9) 5605CH 2.50 (825.5) 2.00 (584.2) (749.) (86.) 5606CH 2.50 (825.5) 2.00 (584.2) (749.) (90.8) 5607CH 5.00 (889.0) (65.0) 6.00 (914.4) (16.2) 114 Volume 1 Residential and Light Commercial CA E December

9 Residential Standby Standby Generator System. Standby Generator Systems Contents Description Page Standby Generator System Number Selection Product Selection Technical Data and Specifications Dimensions EGEN20A EGEN150 Product Description A standby generator system is a package of equipment specifically designed to provide substitute electrical power to a residence in the event of a utility power outage or other emergency. These systems are comprised of a generator, transfer switch and the connections necessary for installation. Eaton s standby generator line consists of air and liquid-cooled models ranging from 8000 watts up to 150,000 watts. Air Cooled Standby Eaton s air cooled generators range from 8 20 kw and these units are perfect for automatically backing up emergency circuits or running every circuit within a home. Eaton s 8 and 10 kw air cooled standby generators boast 410 cc and 50 cc engines. These units are perfect for automatically backing up emergency circuits such as refrigerators, furnace fans, sump pumps and water pumps. Eaton s 14, 17 and 20 kw air cooled standby generators offer fully automatic operation and provide most homeowners with enough power for complete whole house comfort. These units all operate at ultra quiet 66 db, or less, sound level. Liquid Cooled Standby Eaton's liquid cooled generators feature automotive style engines that operate at 1800 or 600 RPM. These units run so quiet that you ll forget that you own a generator until you need it. These units are available in steel or aluminum enclosures and are available in single- and three-phase in four voltages: 120/240V, single-phase; 120/208V, three-phase; 240V, three-phase; and 277/480V, three-phase. Application Description Standby generator systems are most often used in residential, agricultural and light commercial applications. Comfort and safety are key concerns of many homeowners who are dependent on an uninterrupted supply of electricity. The increase in our dependence on power is due in part to the popularity of home offices and in-home health care. Many regions of the United States experience periodic power outages due to extreme weather conditions such as ice and snowstorms, heat waves, tornadoes or hurricanes. Portable generator systems are primarily used for smaller homes or for construction sites where temporary power is required. Permanently installed standby systems are designed for larger homes, small businesses or secondary residences such as vacation homes, cabins, etc., that require uninterrupted power for critical loads. Eaton highly recommends that any generator system be installed by a qualified electrician and/or generator installer. Features, Benefits and Functions Eaton s generator systems offer a wide range of features. All systems feature: ful engines Reliable Eaton transfer switches and control systems using switching duty rated circuit breakers Transfer switches are mechanically interlocked to prevent paralleling of normal and emergency power sources Automatic Transfer system features automatic start/stop and provision for using propane or natural gas Diagnostic panel with remote system status Weekly exercise function Automatic battery charger Run-time meter Four sound absorbing, weather-protected panels Volume 1 Residential and Light Commercial CA E December

10 . Residential Standby Standby Generator System Standards and Certifications CSA, cul and UL 2200 listed and approved All transfer switches are UL 67 and UL 1008 listed as Transfer Switches All generators are UL 2200 listed Number Selection Liquid Cooled ka Rating Product Selection Air Cooled Standby Number Rated (LPG/NG) EGEN8 8000/ 7000 EGEN10 10,000/ 9000 EGEN14 14,000/ 1,000 EGEN17 17,000/ 16,000 EGEN17A 17,000/ 16,000 EGEN20A 20,000/ 18, Surge Watts (LPG/NG) 12,240/ 11,040 15,120/ 1,50 24,480/ 22,800 0,000/ 28,080 0,000/ 28,080 5,000/ 1,920 Voltage Required A = Single-phase 120/240V G = Three-phase 208V J = Three-phase 240V K = Three-phase 480V Engine Operation Voltage 410 cc Fully automatic 50 cc Fully automatic 992 cc Fully automatic 992 cc Fully automatic 992 cc Fully automatic 999 cc Fully automatic Rated Amps at 240V (LPG/NG)./ / / / / / 75.0 EGEN 22 A L A N Fuel Type N = Natural gas L = Liquid propane Rated Amps at 120V (LPG/NG) 66.7/ / / / / / Enclosure Material Enclosure A = Aluminum S = Steel Engine Speed (Rated Sync. RPM) SCAQMD Compliance N =No Y = Yes Number of Cylinders Fuel Type Warranty Steel Liquid propane/ Natural gas Steel Liquid propane/ Natural gas Steel Liquid propane/ Natural gas Steel Liquid propane/ Natural gas Aluminum Liquid propane/ Natural gas Aluminum Liquid propane/ Natural gas Battery Charger years Yes 62 years Yes 6 years Yes 66 years Yes 66 years Yes 66 years Yes 66 Sound Emissions (db at 7 meters) 116 Volume 1 Residential and Light Commercial CA E December

11 Residential Standby Standby Generator System. Liquid Cooled Number Prefix kw Rating Voltages Available Fuel Type Enclosure EGEN22 22 A 120/240V, single-phase N NG/LP Field Convertible A Aluminum (Default setup for NG) J 240V, three-phase EGEN25 25 A 120/240V, single-phase N NG/LP Field Convertible S Steel (Default setup for NG) J 240V, three-phase EGEN27 27 A 120/240V, single-phase N NG/LP Field Convertible A Aluminum (Default setup for NG) J 240V, three-phase EGEN0 0 A 120/240V, single-phase N NG/LP Field Convertible S Steel (Default setup for NG) J 240V, three-phase EGEN6 6 A 120/240V, single-phase N NG/LP Field Convertible A Aluminum Y Yes (Default setup for NG) J 240V, three-phase N No EGEN45 45 A 120/240V, single-phase N NG/LP Field Convertible S Steel Y Yes (Default setup for NG) J 240V, three-phase N No EGEN48 48 A 120/240V, single-phase N NG/LP Field Convertible A Aluminum Y Yes Default setup for NG) J 240V, three-phase N No EGEN60 60 A 120/240V, single-phase N Natural Gas A Aluminum Y Yes J 240V, three-phase L Liquid Propane S Steel N No EGEN70 70 A 120/240V, single-phase N Natural Gas A Aluminum Y Yes J 240V, three-phase L Liquid Propane S Steel N No EGEN80 80 A 120/240V, single-phase N Natural Gas A Aluminum Y Yes J 240V, three-phase L Liquid Propane S Steel N No EGEN A 120/240V, single-phase N Natural Gas A Aluminum Y Yes J 240V, three-phase L Liquid Propane S Steel N No EGEN10 10 A 120/240V, single-phase N Natural Gas A Aluminum Y Yes J 240V, three-phase L Liquid Propane S Steel N No EGEN A 120/240V, single-phase N Natural Gas A Aluminum Y Yes J 240V, three-phase L Liquid Propane S Steel N No SCAQMD Compliance Y Yes (Default Compliant) Y Yes (Default Compliant) Y Yes (Default Compliant) Y Yes (Default Compliant) Volume 1 Residential and Light Commercial CA E December

12 . Residential Standby Standby Generator System Technical Data and Specifications All systems allow the user to pre-select critical circuits that will need power during an outage as shown in the table below. When selecting the essential circuits that will be switched to Backup, it is important that the sum of the combined circuit loads does not exceed the wattage/amperage capacity of the generator. To help you with your selection of essential circuits, please add up the total wattage of all electrical devices to be connected at one time. This total should NOT be greater than the generator s wattage capacity. Circuit Selection Device Running Watts Air conditioner (12,000 btu) 1700 Air conditioner (24,000 btu) 800 Air Conditioner (40,000 btu) 6000 Battery charger (20 amp) 500 Circular saw (6-1/2-inch) Clothes dryer (electric) 5750 Clothes dryer (gas) 700 Clothes washer 1150 Coffee maker 1750 Compressor (1 hp) 2000 Compressor (1/2 hp) 1400 Compressor (/4 hp) 1800 Curling iron 700 Dehumidifier 650 Electric blanket 400 Electric range (per element) 1500 Electric skillet 1250 Freezer 700 Furnace fan (/5 hp) 875 Garage door opener Hair dryer 1200 Hand drill Iron 1200 Jet pump 800 Light bulb 100 Microwave oven Milk cooler 1100 Oil burner on furnace 00 Oil fired space heater (140,000 btu) 400 Oil fired space heater (0,000 btu) 150 Oil fired space heater (85,000 btu) 225 Radio Refrigerator 700 Slow cooker 200 Submersible pump (1 hp) 2000 Submersible pump (1/2 hp) 1500 Submersible pump (1-1/2 hp) 2800 Sump pump Table saw (10-inch) Television Toaster Dimensions Approximate Dimension in Inches (mm) Air Cooled Standby Number Length Width Height Liquid Cooled Standby Weight in Lbs (kg) EGEN (1219.2) (65.0) (76.6) 40 (154.4) EGEN (1219.2) (65.0) (76.6) 87 (175.7) EGEN (1219.2) (65.0) (76.6) 49 (199.) EGEN (1219.2) (65.0) (76.6) 455 (206.6) EGEN17A (1219.2) (65.0) (76.6) 421 (191.1) EGEN20A (1219.2) (65.0) (76.6) 451 (204.8) Number Length Width Height Weight in Lbs (kg) EGEN (1574.8) (76.6) 4.00 (86.6) 895 (406.) EGEN (1600.2) 0.00 (762.0) 5.00 (889.0) 875 (97.) EGEN (1625.6) 1.00 (787.4) 6.00 (914.4) 891 (404.5) EGEN (1651.0) 2.00 (812.8) 7.00 (99.8) 95 (424.5) EGEN (1955.8) 4.00 (86.6) (114.0) 168 (764.1) EGEN (1981.2) 5.00 (889.0) (1168.4) 1414 (642.0) EGEN (2006.6) 6.00 (914.4) (119.8) 170 (77.2) EGEN (202.0) 7.00 (99.8) (1219.2) 1650 (749.1) EGEN (246.8) 7.00 (99.8) (1219.2) 2185 (992.0) EGEN (2921.0) 6.80 (94.7) (2006.6) 2010 (912.5) EGEN (2946.4) 6.80 (94.7) (202.0) 2705 (1228.1) EGEN (2971.8) 6.80 (94.7) (2057.4) 287 (104.) EGEN (2997.2) 6.80 (94.7) (2082.8) 2666 (1210.4) Notes The rated wattage of lights can be taken from light bulbs. The rated wattage of tools, appliances and motors can usually be found on a data plate or decal affixed to the device. If the appliance, tool or motor does not give wattage, multiply 120 volts times the ampere rating to determine watts (volts x amps = watts). Some electric motors (induction types) require about three times more watts of power for starting than for running. This surge lasts for only a few seconds. Be sure you allow for this high starting wattage when selecting electrical devices that will be energized by the backup power system: Figure the watts required to start the largest motor. Add that to the total running watts of all other connected loads. All weights are given with steel enclosures. 118 Volume 1 Residential and Light Commercial CA E December

13 Residential Standby Automatic Transfer Switches.4 Residential Automatic Transfer Switches Contents Description Page Automatic Transfer Switches Product Selection Dimensions Product Description 50, 100, 150, 200 and 400A Fully Automatic All Eaton switches monitor utility and generator voltages and will automatically connect to the appropriate source of power. Green Line of Automatic Transfer Switches With the rising cost of commodities and fuel in today s economy, consumers are concerned with maximizing the value of their purchases. Electrical loads are now intelligently managed with Eaton s Green Line of automatic transfer switches (ATS). With these ATSs, the consumer can maximize the output of a smaller generator and reduce upfront and ongoing costs. As a part of our commitment to quality, every Green ATS, at no extra cost, will ship with Eaton s CHSPULTRA. CHSP will help prevent potential damage that can be caused by surges in the utility line. ATS Ready Loadcenter Eaton s Lincoln Flex Center announces the release of the ATS Ready loadcenter. With increasing power outage concerns and an aging electrical infrastructure, emergency power is more important than ever. Eaton s ATS Ready loadcenter addresses future emergency power needs by enabling a fast, efficient installation of an automatic transfer switch kit to convert from utility to emergency power. The ATS Ready loadcenter gives homebuilders and electrical contractors the flexibility to easily add an ATS in the future. The ATS Ready loadcenter is currently available in Eaton s premium CH brand. Order your ATS Ready loadcenter today. ATS kit can be ordered separately or factory installed! CH 200A single-phase MCB 6-circuit loadcenter For use with 7 12 kw generators NEMA 1 design Cat. No. CH6B200EGP Order 50A transfer switch kit separately ATS Kit Cat. No. CHEGR50KIT ATS factory installed in ATS Ready loadcenter Cat. No. CH6B200EGPK CH cover included Application Description 100, 200 and 400A switches are capable of whole house power transfer in residential/ small business applications. Standards and Certifications UL 1008 listed 50A Indoor Installation Selected Load Pre-Wired Standby Generator Sound Shield Fuel Supply (NG or LP) Meter Air Conditioner 50A Indoor Transfer Switch 100/200A Service Panel 100/200A Outdoor Installation Whole House Pre-Wired Standby Generator Sound Shield Fuel Supply (NG or LP) Service Disconnect Meter Air Conditioner Low Voltage Disconnect 100/200A Outdoor Transfer Switch 100/200A Service Panel Volume 1 Residential and Light Commercial CA E December

14 .4 Residential Standby Automatic Transfer Switches Product Selection EGS100L24R Automatic Transfer Switches Service Entrance Disconnect Voltage Circuits Included Amperes Standard Automatic Transfer Switches Load Mgmt. CHSHP Ultra Surge Included No. of Poles Frequency UL Listed Switch Type Enclosure 120/ No 50 No No 2 50/ Electrically held NEMA 1 (indoor) 120/ No 50 No No 2 50/ Electrically held NEMA R 120/240 N/A No 100 No No 2 50/ Mechanically held NEMA R 120/240 N/A Yes 100 No No 2 50/ Mechanically held NEMA R 120/ No 100 No No 2 50/ Mechanically held NEMA R 120/240 N/A No 200 No No 2 50/ Mechanically held NEMA R 120/240 N/A Yes 200 No No 2 50/ Mechanically held NEMA R 120/240 N/A Yes 400 No No 2 50/ Mechanically held NEMA R Green Automatic Transfer Switches 120/240 N/A No 100 Yes Yes 2 50/ Mechanically held NEMA R 120/240 N/A Yes 100 Yes Yes 2 50/ Mechanically held NEMA R 120/ No 100 Yes Yes 2 50/ Mechanically held NEMA R 120/240 N/A Yes 150 Yes Yes 2 50/ Mechanically held NEMA R 120/240 N/A No 200 Yes Yes 2 50/ Mechanically held NEMA R 120/240 N/A Yes 200 Yes Yes 2 50/ Mechanically held NEMA R 120/240 N/A Yes 400 Yes Yes 2 50/ Mechanically held NEMA R Number EGS50L12 EGS50L12R EGS100 EGS100SE EGS100L24R EGS200 EGS200SE EGS400NSE EGSU100AC EGSU100NSEAC EGSU100L24RAC EGSU150NSEAC EGSU200AC EGSU200NSEAC EGSU400NSEAC 120 Volume 1 Residential and Light Commercial CA E December

15 Residential Standby Automatic Transfer Switches.4 CH6B200EGP CHEGR50KIT ATS Ready Loadcenters Description ATS Ready loadcenter ATS kit for ATS Ready loadcenter Number CH6B200EGP CHEGR50KIT Dimensions Approximate Dimension in Inches (mm) Automatic Transfer Switches Number Width Height Depth Weight Lbs (kg) EGS50L (62.0) (5.4) 4.00 (101.6) 25 (11.) EGS50L12R (62.0) (5.4) 6.00 (152.4) 29 (1.15) EGS (67.) (428.5) 5.2 (15.1) 25 (11.) EGS100SE (67.) (428.5) 5.2 (15.1) 28 (12.70) EGS100L24R (67.) 29. (744.0) 5.2 (15.1) 8 (17.24) EGS (67.) (67.0) 5.25 (1.4) 5 (15.87) EGS200SE (67.) (741.7) 5.2 (15.1) 45 (20.41) EGS400NSE 2.14 (587.8) 5.55 (90.0) (254.0) 120 (54.4) EGSU100AC (67.) (428.5) 5.2 (15.1) 25 (11.) EGSU100NSEAC (67.) (428.5) 5.2 (15.1) 28 (12.70) EGSU100L24RAC (67.) 29. (745.0) 5.2 (15.1) 8 (17.24) EGSU150NSEAC (67.) (741.7) 5.2 (15.1) 45 (20.41) EGSU200AC (67.) (67.0) 5.25 (1.4) 5 (15.88) EGSU200NSEAC (67.) (741.7) 5.2 (15.1) 45 (20.41) EGSU400NSEAC 2.14 (587.8) 5.55 (90.0) (254.0) 120 (54.4) CH6B200EGPK ATS Ready LC with factory-installed ATS kit CH6B200EGPK Volume 1 Residential and Light Commercial CA E December

16 .4 Residential Standby Automatic Transfer Switches 122 Volume 1 Residential and Light Commercial CA E December