Oh, Lic # SHOP DRAWINGS Lake Erie Electric, Inc. FOR DWG. & SPEC. CONFORMITY ONLY D.M.Y 08/15/2016

Transcription

1 Oh, Lic #26962 SHOP DRAWINGS Lake Erie Electric, Inc. FOR DWG. & SPEC. CONFORMITY ONLY D.M.Y 08/15/2016 By ebelba at 1:21 pm, Aug 29, 2016

2 Siemens Submittal Package Drexel Trash Ohio Labor Center Date : 8/2/2016 usa.siemens.com/compas

3 TRANSMITTAL LETTER Date: 8/2/2016 To: THE FURBAY ELECTRIC SUPPLY COMPANY 208 SCHROYER AVE SW CANTON, OH, US Job Name: Quote Name: Quote Number: Distributor: Drexel Trash Ohio Labor Center Drexel Trash Ohio Labor Center lopeaa100_ _00_00_o00 THE FURBAY ELECTRIC SUPPLY COMPANY Contractor: LAKE ERIE ELECTRIC INC Drawings are for: Approval Record Please find enclosed 1 Copy of the below listed materials for the above referenced job. Contents: IEC/OEM Control Components Panelboards Switchboards Approval Drawings: Upon the return of 1 Copy of Approved or No Exceptions Noted drawings with release, it will be considered fact that the material as shown meets the requirements of the plans and specifications. For drawings returned indicating Approved as Noted or Exceptions as Noted, the cost of any additional equipment not included in the original quotation will be reflected in the total invoice price. Any changes other than those shown on these returned drawings will not be considered the responsibility of Siemens. It must be noted that these drawings and descriptive literature incorporate Siemens interpretation of the plans and specifications and are subject to corrections of errors. The above material is on Hold for Release status and will not be released until the receipt of signed submittals having one of the above notations with formal release. These drawings along with release should be returned as soon as possible so as not to cause any delays in shipping and/or escalation that might be incurred due to these delays. Record Drawings: These drawings reflect the products manufactured by Siemens for this job. Submitted By: Alfredo A. López, PMP, LEED AP Siemens Industry, Inc 5350 Transportation Blvd Phone: E Mail: alfredolopez@siemens.com Fax:

4 Proposal To: THE FURBAY ELECTRIC SUPPLY COMPANY 208 SCHROYER AVE SW CANTON, OH USA From: Siemens Industry, Inc 5350 Transportation Blvd Garfield Heights, OH USA Attention: Alfredo A. López, PMP, LEED AP Tel. No.: Job Name: Quote Name: Quote #: Bid Date: 04/20/2016 Drexel Trash Ohio Labor Center Drexel Trash Ohio Labor Center lopeaa100_ _00_00_o00 Siemens Industry, Inc. (Company) agrees to sell to Purchaser and Purchaser agrees to purchase from the Company the goods described below. Written quotations are valid for 30 calendar days from price approval date unless otherwise stated in the quotation. Quotations are subject to change by Siemens Industry, Inc. at any time upon written notice to Purchaser. Quoted Lead times refer to the manufacturing cycles, in working days, at time of quotations and are subject to change. Quote Notes: Line #: Qty Description 10 1 Standard ProductVACUBRK SW 17IN 100A 3P 600V Catalog No.: V7E Standard ProductVACUBRK SW 17IN 400A 3P 600V Catalog No.: V7H Standard ProductTWIN MOUNT VB MTG KIT 30100A P5,SWBD Catalog No.: VB Standard Product400600A VB MTG KIT P5 PNLBD AND FC SWBD Catalog No.: VB Standard Product3.75 IN BLANK FILLER PLATE P4/P5/SWBD Catalog No.: 6FPB Standard Product5.00 IN BLANK FILLER PLATE P4/P5/SWBD Catalog No.: 6FPB H2PANELBOARD P1 1 SECTION P1E27BQ100CTST, System Voltage: 480Y/277 3Ø 4W Wye AC, lopeaa100_ _00_00_o00 1 8/2/2016

5 Proposal 14,000 AIC, Top Feed, Surface Mount, Bus Rating: 250A, Bus Material: Copper, Plating: Tin, NEMA 1 INDOOR. 15 BL/BQD PROVISION 1 INTERIOR W/ 100A /3PBQD MAIN BREAKER 1 (1)#8#1 Cu / #6#1/0 Al Subfeed/Feedthru Provision Master NP Secured Adhesive Card HolderStd Plastic Sleeve Certification UL Std Al/Cu Gnd Connector 3 20A /3PBQD 1 25A /3PBQD 1 SPD 1 250kA Lighting Panel SPD 1 Enclosure, Catalog Number B38 1 Front, Catalog Number S38B H1PANELBOARD P1 1 SECTION P1E30JX400CTST, System Voltage: 480Y/277 3Ø 4W Wye AC, 14,000 AIC, Top Feed, Surface Mount, Bus Rating: 400A, Bus Material: Copper, Plating: Tin, NEMA 1 INDOOR. 1 INTERIOR W/ 400A /3PJXD6 MAIN BREAKER 1 (2)3/0500Kcmil Cu/ 4/0500 Al Subfeed/Feedthru Provision Master NP Secured Adhesive Card HolderStd Plastic Sleeve Certification UL Std Al/Cu Gnd Connector 18 BL/BQD PROVISION 4 100A /3PBQD 1 SPD 1 250kA Lighting Panel SPD 1 Enclosure, Catalog Number B62 1 Front, Catalog Number S62B M1PANELBOARD P1 1 SECTION P1C42QJ225CTST, System Voltage: 208Y/120 3Ø 4W Wye AC, 10,000 AIC, Top Feed, Surface Mount, Bus Rating: 250A, Bus Material: Copper, Plating: Tin, NEMA 1 INDOOR. 1 INTERIOR W/ 225A /3PQJ2 MAIN BREAKER 1 (1)#6300Kcmil Cu / #4300 Al A /2PBL 40 20A /1PBL Subfeed/Feedthru Provision Master NP Secured Adhesive Card HolderStd Plastic Sleeve Certification UL Std Al/Cu Gnd Connector lopeaa100_ _00_00_o00 2 8/2/2016

6 Proposal 1 SPD 1 250kA Lighting Panel SPD 1 Enclosure, Catalog Number B44 1 Front, Catalog Number S44B TM13F3Y075D16 Series J Standard Dry Type, 3 Phase, 75 KVA, 480 Primary Voltage, 208Y/120 Secondary Voltage, 6 2.5% (2 FCAN 4 FCBN) Taps, 150C, Ventilated, Drip Shield Kit: Provided With Transformer, Seismic Rated: FLOOR MOUNTED ONLY. Catalog No.: A6X DSCH1200A 3P 600V 3W FUSED HD TYPE 3R Heavy Duty (600 V max), Fusible, Number of Poles: 3, Voltage AC Max: 600, Voltage DC Max: 250, Max Ampere Rating: 200, Less Neutral, Type 3R, Fuse Class Standard Mounting: Class H, K, Fuse Class Move Load Base: Class J, Fuse Class Need Mounting Kit: Class R, T. Catalog No.: HF364R DSD100A 3P 240V 4W FUSED HD TYPE 1 Heavy Duty (600 V max), Fusible, Number of Poles: 3, Voltage AC Max: 240, Voltage DC Max: 250, Max Ampere Rating: 100, With Neutral, Type 1, Fuse Class Standard Mounting: Class H, K, Fuse Class Move Load Base: Class J, Fuse Class Need Mounting Kit: Class R, T. Catalog No.: HF323N DSW30A 3P 240V 4W FUSED HD TYPE 1 Heavy Duty (600 V max), Fusible, Number of Poles: 3, Voltage AC Max: 240, Voltage DC Max: 250, Max Ampere Rating: 30, With Neutral, Type 1, Fuse Class Standard Mounting: Class H, K, Fuse Class Need Mounting Kit: Class R. Catalog No.: HF321N Group: Alternate M2PANELBOARD P1 1 SECTION P1C42QJ225CTST, System Voltage: 208Y/120 3Ø 4W Wye AC, 10,000 AIC, Top Feed, Surface Mount, Bus Rating: 250A, Bus Material: Copper, Plating: Tin, NEMA 1 INDOOR. 1 INTERIOR W/ 225A /3PQJ2 MAIN BREAKER 1 (1)#6300Kcmil Cu / #4300 Al A /3PBL 1 100A /3PBL 1 30A /2PBL 34 20A /1PBL 1 SPD Subfeed/Feedthru Provision Master NP Secured Adhesive Card HolderStd Plastic Sleeve Certification UL Std Al/Cu Gnd Connector lopeaa100_ _00_00_o00 3 8/2/2016

7 Proposal 1 250kA Lighting Panel SPD 1 Enclosure, Catalog Number B44 1 Front, Catalog Number S44B TM23F3Y075D16 Series J Standard Dry Type, 3 Phase, 75 KVA, 480 Primary Voltage, 208Y/120 Secondary Voltage, 6 2.5% (2 FCAN 4 FCBN) Taps, 150C, Ventilated, Drip Shield Kit: Provided With Transformer, Seismic Rated: FLOOR MOUNTED ONLY. Catalog No.: A6X Global Notes: Price Policy: Payment: Shipping: Freight: Delivery: Other: Standard quote is valid for 30 days from price approval date. Per Siemens distributor's terms. Shipment of goods will be made after receipt of all the following at Company's production facility: (a) Purchase Order / Electronic PO, (b) Technical Information, and if required (c) Drawing Approval. Freight allowed on orders over $ provided Seller selects the Route Option: BESTRT Best Route. FOB Shipping Point, unless stated otherwise. This proposal is subject to credit approval and US government regulation. It is also based on the Company's interpretation of the plans and specifications and is subject to correction for errors in such plans or specifications. This document and any other documents specifically referred to as being a part hereof constitute the entire agreement on the subject matter and it shall not be modified except in writing signed by both parties. THIS PROPOSAL IS BASED UPON SIEMENS STANDARD TERMS AND CONDITIONS OF SALE ATTACHED HERETO AND INCLUDED HEREIN. Company hereby objects to any additional or different terms set forth in Purchaser's request for proposal, specifications, purchase order, or any other document of Purchaser. Acceptance of additional or different terms must be specifically assented to in writing by Company. NUCLEAR Buyer represents and warrants that the goods covered by this contract shall not be used in or in connection with a nuclear facility or application. If Buyer is unable to make such representation and warranty, then Buyer agrees to indemnify and hold harmless Siemens and to waive and require its insurers to waive all right of recovery against Siemens for any damage, loss, destruction, injury or death resulting from a "nuclear incident", as that term is defined in the Atomic Energy Act of 1954, as amended, whether or not due to Siemens' negligence. lopeaa100_ _00_00_o00 4 8/2/2016

8 Proposal SIEMENS STANDARD TERMS AND CONDITIONS OF SALE FOR PRODUCTS Version1.1/Restricted Date: 07/01/ APPLICABLE TERMS. This Agreement governs the sale of equipment, components, parts, and materials provided by Siemens ( Products ). Any applicable addenda, these terms, Siemens proposal, price quote, purchase order, or acknowledgement issued by Siemens form the parties final agreement ( Agreement ). In the event of a conflict between these documents, precedence shall apply in accordance with the order listed in the previous sentence. Siemens proposal, offer or acceptance is conditioned on Buyer's acceptance of this Agreement. Any additional or conflicting terms in Buyer's request for proposal, specifications, purchase order or any other written or oral communication are not binding on Siemens unless separately signed by Siemens. Siemens failure to object to Buyer s additional or conflicting terms does not operate as a waiver of any terms contained in this Agreement. 2. PRICING & PAYMENT. Prices and payment terms are: (i) as stated in Siemens proposal, or if none are stated; (ii) Siemens' standard prices in effect when Siemens receives Buyer s purchase order; or if neither (i) or (ii) apply, then Siemens standard prices in effect when the Products ship. (a) Payment. Unless stated in Siemens proposal, all payments are due net thirty (30) days from the invoice date in United States Dollars. (b) Credit Approval. All orders are subject to credit approval by Siemens. Siemens may modify, suspend or withdraw the credit amount or payment terms at any time. If there is doubt as to Buyer s financial condition, Siemens may withhold manufacturing or shipment, require cash payments, or require other satisfactory security. Siemens may recover shipped Products from the carrier pending such assurances. (c) Installment Shipment. Where Products are delivered in shipments or only part of a shipment fails to comply with this Agreement, the Buyer may only reject the noncompliant portion. Buyer will separately pay for each shipment. If Siemens holds or stores Products for Buyer, it shall do so at Buyer's sole risk and expense. (d) Taxes, Shipping, Packing, Handling. Unless stated in writing by Siemens, Siemens prices exclude charges for freight, unloading, storage, insurance, taxes, excises, fees, duties or other government charges related to the Products. Buyer will pay these amounts or reimburse Siemens. If Buyer claims a tax or other exemption or direct payment permit, Buyer will provide a valid exemption certificate or permit and indemnify, defend and hold Siemens harmless from any taxes, costs and penalties arising from same. Siemens' prices include the costs of its standard domestic packing only. Any packing deviation, including U.S. Government sealed packing, will be charged to Buyer. Increases, changes (including in application), adjustments or surcharges which may be incurred are for Buyer s account. (e) Late Payments. Late payments shall bear interest at an annual percentage rate of twelve percent (12%) or the highest rate allowed by law, whichever is lower. (f) Disputed Invoice. If Buyer disputes all or any portion of an invoice, it must first deliver written notice to Siemens of the disputed amount and the basis for the dispute within twentyone (21) days of receiving the invoice. Failure of Buyer to timely notify Siemens of any dispute constitutes a waiver of Buyer s claim. If Buyer only disputes a portion of the invoice, Buyer must pay the undisputed portion in accordance with Article 2(a). Upon resolution of the dispute, Buyer must pay the invoice or the remainder of the invoice, plus any accrued interest on the late payment. (g) Suspension/Termination Right. Siemens may suspend work if an undisputed invoice is more than thirty (30) days past due. Siemens may terminate this Agreement if an undisputed invoice is more than sixty (60) days past due. Unless prohibited by law, Siemens may also terminate this Agreement immediately in the event of a material adverse change in Buyer s financial condition including, but not limited to, bankruptcy, insolvency, liquidation or similar financial condition. 3. DELIVERY; TITLE; RISK OF LOSS. Products will be delivered F.O.B. Siemens point of shipment with title and risk of loss or damage passing to Buyer at that point. Buyer is responsible for all transportation, insurance and related expenses. The related expenses shall include any taxes, duties or documentation fees. Siemens may make partial shipments. Any shipping, delivery and installation dates are estimated dates only. Siemens is not liable for any loss or expense incurred by Buyer or Buyer's customers if Siemens fails to meet its delivery schedule. 4. DEFERMENT AND CANCELLATION. Buyer has no right to defer shipment but may cancel this Agreement on thirty (30) days written notice if Siemens has not already performed. If Buyer cancels this Agreement, it shall pay all cancellation charges including, without limitation: (i) the full price for any finished Product; (ii) for partially completed product, the portion of the price determined to be due by Siemens based on its percentage of completion of the Product; (iii) reasonable overhead and profit; and (iv) any payments due subcontractors and/or suppliers for any materials, components or products ordered which cannot be cancelled, refunded, or redirected for other beneficial use. 5. TRANSPORTATION AND STORAGE. (a) When Products are ready for shipment, Siemens will: (i) inform Buyer, and Buyer will then promptly give shipping instructions to Siemens; (ii) determine the method of transportation and shipment routing; and (iii) ship the lopeaa100_ _00_00_o00 5 8/2/2016

9 Proposal Products with freight prepaid by normal transportation. If Buyer fails to provide timely shipping instructions, Siemens will ship the Products by normal transportation means to Buyer or to a storage location selected by Siemens. Buyer will pay or reimburse any excess transportation charges for special or expedited transportation. (b) If Products are placed into storage, delivery occurs and risk of loss transfers to Buyer when the Products are placed on the carrier for shipment to the storage location. If the Products are to be stored in the facility where manufactured, delivery occurs and risk of loss transfers to Buyer when placed in the storage location. Buyer will pay all Siemens storage expenses, including but not limited to, preparation for and placement into storage, handling, freight, storage, inspection, preservation, maintenance, taxes and insurance, upon receipt of an invoice(s) from Siemens. When conditions permit and upon payment to Siemens of all amounts due, Buyer must arrange, at its expense, to remove the Products from storage. Buyer bears the risk of loss, damage or destruction to Products in storage. 6. FORCE MAJEURE / DELAYS. If Siemens performance is delayed by any cause beyond its reasonable control (regardless of whether the cause was foreseeable), including without limitation acts of God, strikes, labor shortage or disturbance, fire, accident, war or civil disturbance, delays of carriers, cyberattacks, terrorist attacks, failure of normal sources of supply, or acts or inaction of government, Siemens time of performance will be extended by a period equal to the length of the delay plus any consequences of the delay. Siemens will notify Buyer within a reasonable time after becoming aware of any such delay. 7. BUYER S REQUIREMENTS. Siemens performance is contingent upon Buyer timely fulfilling all of its obligations under this Agreement. These obligations include the Buyer supplying all documents and approvals needed for Siemens to perform, including but not limited to technical information and data, drawing and document approvals, and necessary commercial documentation. Siemens may request a change order for an equitable adjustment in prices and times for performance, as well as for any additional costs or any delay resulting from the failure of Buyer or Buyer s contractors, successors or assigns to meet these obligations. 8. INDEMNITY. Siemens and Buyer (each as an Indemnitor ) shall indemnify the other ( Indemnitee ) from and against all third party claims alleging bodily injury, death or damage to a third party s tangible property, but only to the extent caused by the Indemnitor s negligent acts or omissions. If the injury or damage is caused by the parties joint or contributory negligence, the loss and/or expenses shall be borne by each party in proportion to its degree of fault. No part of the Product(s) or Buyer s site is considered third party property. Indemnitee shall provide the Indemnitor with prompt written notice of any third party claims covered by this Article. Indemnitor has the unrestricted right to select and hire counsel and the exclusive right to conduct the legal defense and/or settle the claim on the Indemnitee s behalf. The Indemnitee shall not make any admission(s) which might be prejudicial to the Indemnitor and shall not enter into a settlement without the express permission of the Indemnitor. 9. WARRANTIES. (a) Warranties. Siemens warrants that: (i) each Product is free from defects in material and workmanship; (ii) each Product materially conforms to Siemens' specifications that are attached to, or expressly incorporated into this Agreement; and (iii) at the time of delivery, Siemens has title to each Product free and clear of liens and encumbrances (collectively, the Warranties"). The Warranties do not apply to software furnished by Siemens. The sole and exclusive warranties for any software are set forth in the applicable Software License/Warranty Addendum. (b) Conditions to the Warranties. The Warranties are conditioned on: (i) no repairs, modifications or alterations being made to the Product other than by Siemens or its authorized representatives; (ii) Buyer handling, using, storing, installing, operating and maintaining the Product in compliance with any parameters or instructions in any specifications attached to, or incorporated into this Agreement; (iii) compliance with all generally accepted industry standards; (iv) Buyer discontinuing use of the Product after it has, or should have had, knowledge of any defect; (v) Buyer providing prompt written notice of any warranty claims within the warranty period described below; (vi) at Siemens' discretion, Buyer either removing and shipping the Product or nonconforming part thereof to Siemens, at Buyer's expense, or granting Siemens reasonable access to the Products to assess the warranty claims; (vii) Product not having been subjected to accident (including force majeure), alteration, abuse or misuse; and (viii) Buyer not being in default of any payment obligation. (c) Exclusions from Warranty Coverage. The Warranties do not apply to any equipment not provided by Siemens under this Agreement. Any Product that is described as being experimental, developmental, prototype, or pilot is specifically excluded from the Warranties and is provided to Buyer as is with no warranties of any kind. Normal wear and tear is excluded, including any expendable items that comprise part of the Product (such as fuses, light bulbs and lamps). Siemens does not warrant or guarantee that any Product will be secure from cyber threats, hacking or similar malicious activity. Products that are networked, connected to the internet, or otherwise connected to computers or other devices must be appropriately protected by Buyer and/or end user against unauthorized access. (d) Warranty Period. Buyer must provide written notice of any claims for breach of Warranties by the earlier of twelve (12) months from initial operation of the Product or eighteen (18) months from shipment. Additionally, absent written notice within the warranty period, any use or possession of the Product after expiration of the warranty period is conclusive evidence that the Warranties have been satisfied. (e) Remedies. Buyer's sole and exclusive remedies for breach of the Warranties are limited, at Siemens' discretion, to repair or replacement of the Product, or its nonconforming parts, within a reasonable time period, or refund of all or part of the purchase price. The warranty on lopeaa100_ _00_00_o00 6 8/2/2016

10 Proposal repaired or replaced parts is limited to the remainder of the original warranty period. Unless Siemens agrees otherwise in writing, Buyer will be responsible for any costs associated with: (i) gaining access to the Product; (ii) removal, disassembly, replacement, installation, or reinstallation of any equipment, materials or structures to permit Siemens to perform its warranty obligations; (iii) transportation to and from the Siemens factory or repair facility; and (iv) damage to equipment components or parts resulting in whole or in part from noncompliance by the Buyer with Article 9(b) or from their deteriorated condition. All exchanged Products replaced under this Warranty will become the property of Siemens. (f) Transferability. The Warranties are only transferable during the warranty period and only to the Product s initial enduser. (g) THE WARRANTIES IN THIS ARTICLE 9 ARE SIEMENS' SOLE AND EXCLUSIVE WARRANTIES AND ARE SUBJECT TO THE LIMITS OF LIABILITY IN ARTICLE 10 BELOW. SIEMENS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, COURSE OF DEALING AND USAGE OF TRADE. 10. LIMITATION OF LIABILITY. NOTWITHSTANDING ANYTHING IN THIS AGREEMENT TO THE CONTRARY, SIEMENS IS NOT LIABLE, WHETHER BASED IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, INDEMNITY OR ANY OTHER LEGAL OR EQUITABLE THEORY, FOR: LOSS OF USE, REVENUE, SAVINGS, PROFIT, INTEREST, GOODWILL OR OPPORTUNITY, COSTS OF CAPITAL, COSTS OF REPLACEMENT OR SUBSTITUTE USE OR PERFORMANCE, LOSS OF INFORMATION AND DATA, LOSS OF POWER, VOLTAGE IRREGULARITIES OR FREQUENCY FLUCTUATION, CLAIMS ARISING FROM BUYER S THIRD PARTY CONTRACTS, OR FOR ANY TYPE OF INDIRECT, SPECIAL, LIQUIDATED, PUNITIVE, EXEMPLARY, COLLATERAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR FOR ANY OTHER LOSS OR COST OF A SIMILAR TYPE. SIEMENS MAXIMUM LIABILITY UNDER THIS AGREEMENT IS THE ACTUAL PURCHASE PRICE RECEIVED BY SIEMENS FOR THE PRODUCT THAT GAVE RISE TO THE CLAIM. BUYER AGREES THAT THE EXCLUSIONS AND LIMITATIONS IN THIS ARTICLE 10 WILL PREVAIL OVER ANY CONFLICTING TERMS AND CONDITIONS IN THIS AGREEMENT AND MUST BE GIVEN FULL FORCE AND EFFECT, WHETHER OR NOT ANY OR ALL SUCH REMEDIES ARE DETERMINED TO HAVE FAILED OF THEIR ESSENTIAL PURPOSE. THESE LIMITATIONS OF LIABILITY ARE EFFECTIVE EVEN IF SIEMENS HAS BEEN ADVISED BY BUYER OF THE POSSIBILITY OF SUCH DAMAGES. THE WAIVERS AND DISCLAIMERS OF LIABILITY, RELEASES FROM LIABILITY AND LIMITATIONS ON LIABILITY EXPRESSED IN THIS ARTICLE 10 EXTEND TO SIEMENS AFFILIATES, PARTNERS, PRINCIPALS, SHAREHOLDERS, DIRECTORS, OFFICERS, EMPLOYEES, SUPPLIERS, AGENTS, AND SUCCESSORS AND ASSIGNS. 11. PATENT AND COPYRIGHT INFRINGEMENT. Siemens will, at its option and expense, defend or settle any suit or proceeding brought against Buyer based on an allegation that any Product or use thereof for its intended purpose constitutes an infringement of any Patent Cooperation Treaty country member s patent or misappropriation of a third party s trade secret or copyright in the country where the Product is delivered by Siemens. Buyer will promptly give Siemens written notice of the suit or proceeding and the authority, information, and assistance needed to defend the claims. Siemens shall have the full and exclusive authority to defend and settle such claim(s) and will pay the damages and costs awarded in any suit or proceeding so defended. Buyer shall not make any admission(s) which might be prejudicial to Siemens and shall not enter into a settlement without Siemens consent. Siemens is not responsible for any settlement made without its prior written consent. If the Product, or any part thereof, as a result of any suit or proceeding so defended is held to constitute infringement or its use by Buyer is enjoined, Siemens will, at its option and expense, either: (i) procure for Buyer the right to continue using said Product; (ii) replace it with substantially equivalent noninfringing Product; or (iii) modify the Product so it is noninfringing. Siemens will have no duty or obligation under this Article 11 if the Product is: (i) supplied according to Buyer's design or instructions and compliance therewith has caused Siemens to deviate from its normal course of performance; (ii) modified by Buyer or its contractors after delivery; or (iii) combined by Buyer or its contractors with devices, methods, systems or processes not furnished hereunder and by reason of said design, instruction, modification, or combination a suit is brought against Buyer. In addition, if by reason of such design, instruction, modification or combination, a suit or proceeding is brought against Siemens, Buyer must protect Siemens in the same manner and to the same extent that Siemens has agreed to protect Buyer under this Article 11. THIS ARTICLE 11 IS AN EXCLUSIVE STATEMENT OF SIEMENS DUTIES AND BUYER S REMEDIES RELATING TO PATENTS, TRADE SECRETS AND COPYRIGHTS, AND DIRECT OR CONTRIBUTORY INFRINGEMENT THEREOF. 12. CONFIDENTIALITY. (a) Both during and after the term of this Agreement, the parties will treat as confidential all information obtained from the disclosing party and all information compiled or generated by the disclosing party under this Agreement for the receiving party, including but not limited to business information, manufacturing information, technical data, drawings, flow charts, program listings, software code, and other software, plans and projections. Neither party may disclose or refer to the work to be performed under this Agreement in any manner that identifies the other party without advance written permission. However, Siemens has the right to share confidential information with its affiliates and subcontractors, provided those recipients are subject to the same confidentiality obligations set forth herein. (b) Nothing in this Agreement requires a party to treat as confidential any information which: (i) is or becomes generally known to the public, without the fault of the receiving party; (ii) is disclosed to the receiving party, without obligation of confidentiality, by a third party having the lopeaa100_ _00_00_o00 7 8/2/2016

11 Proposal right to make such disclosure; (iii) was previously known to the receiving party, without obligation of confidentiality, which fact can be demonstrated by means of documents which are in the possession of the receiving party upon the date of this Agreement; (iv) was independently developed by receiving party or its representatives, as evidenced by written records, without the use of discloser s confidential information; or (v) is required to be disclosed by law, except to the extent eligible for special treatment under an appropriate protective order, provided that the party required to disclose by law will promptly advise the originating party of any requirement to make such disclosure to allow the originating party the opportunity to obtain a protective order and assist the originating party in so doing. (c) It is Siemens policy not to unlawfully or improperly receive or use confidential information, including trade secrets, belonging to others. This policy precludes Siemens from obtaining, directly or indirectly from any employee, contractor, or other individual rendering services to Siemens confidential information of a prior employer, client or any other person which such employee, contractor, or individual is under an obligation not to disclose. Buyer agrees to abide by this policy. 13. COMPLIANCE WITH LAWS. The parties agree to comply with all applicable laws and regulations, including but not limited to those relating to the manufacture, purchase, resale, exportation, transfer, assignment or use of the Products. 14. CHANGES IN WORK. No change will be made to the scope of work unless Buyer and Siemens agree in writing to the change and any resulting price, schedule or other contractual modifications. If any change to any law, rule, regulation, order, code, standard or requirement impacts Siemens obligations or performance under this Agreement, Siemens may request a change order for an equitable adjustment in the price and time of performance. 15. NONWAIVER. Any waiver by a party of strict compliance with this Agreement must be in writing, and any failure by the parties to require strict compliance in one instance will not waive its right to insist on strict compliance thereafter. 16. MODIFICATION OF TERMS. This Agreement may only be modified by a written instrument signed by authorized representatives of both parties. 17. ASSIGNMENT. Neither party may assign all or part of this Agreement, or any rights or obligations under this Agreement, without the prior written consent of the other; but either party may assign its rights and obligations, without recourse or consent, to any parent, wholly owned subsidiary, or affiliate or affiliate s successor organization (whether as a result of reorganization, restructuring or sale of substantially all of a party s assets). However, Buyer shall not assign this Agreement to: a competitor of Siemens; an entity in litigation with Siemens; or an entity lacking the financial capability to satisfy Buyer s obligations. Any assignee expressly assumes the performance of any obligation assigned. Siemens may grant a security interest in this Agreement and/or assign proceeds of this Agreement without Buyer s consent. 18. APPLICABLE LAW AND JURISDICTION. This Agreement is governed by and construed in accordance with the laws of the State of Delaware, without regard to its conflict of laws principles. The application of the United Nations Convention on Contracts for the International Sale of Goods is excluded. BOTH SIEMENS AND BUYER KNOWINGLY, VOLUNTARILY AND IRREVOCABLY WAIVE ALL RIGHTS TO A JURY TRIAL IN ANY ACTION OR PROCEEDING RELATED IN ANY WAY TO THIS AGREEMENT. Each party agrees that claims and disputes arising out of this Agreement must be decided exclusively in a federal or state court of competent jurisdiction located in a state in which either Buyer or Siemens maintains its principal place of business. Each party submits to the personal jurisdiction of such courts for the purpose of litigating any claims or disputes. 19. SEVERABILITY. If any provision of this Agreement is held invalid, illegal or unenforceable, the remaining provisions will not in any way be affected or impaired. A court may modify the invalid, illegal or unenforceable provision to reflect, as closely as possible, the parties original intent. 20. EXPORT / IMPORT COMPLIANCE. Buyer acknowledges that Siemens is required to comply with applicable export / import laws and regulations relating to the sale, export, import, transfer, assignment, disposal and use of the Products, including any export / import license requirements. Buyer agrees that Products will not at any time directly or indirectly be used, exported, imported, sold, transferred, assigned or otherwise disposed of in a manner which will result in noncompliance with any export / import laws and regulations. Siemens continuing performance hereunder is conditioned on compliance with such export / import laws and regulations at all times. 21. PRODUCT RETURNS. Prior to the return of any Product to Siemens, Buyer must identify the Product or portion thereof and obtain written authorization and shipping instructions from Siemens. Siemens has the right, in its sole discretion, to permit or reject any such return. Siemens authorization to return any Product to Siemens does not relieve Buyer of its obligation to pay for such Product. Upon receipt, inspection, and acceptance of the Product by Siemens, Siemens will issue a credit memo to Buyer, less applicable restocking fees. Siemens reserves the right to reject any hazardous material. 22. NUCLEAR. Unless expressly authorized in writing by Siemens, the Products must not be used in or in connection with a nuclear facility or application. If Buyer uses any Product in connection with any nuclear facility or activity, it does so at its own risk and Buyer will indemnify, defend and hold Siemens harmless, and waives and will require its insurers to waive all right of recovery against Siemens for any damage, loss, destruction, injury or death resulting from a nuclear incident, as defined in the Atomic Energy Act of 1954, as amended, whether or not due to Siemens negligence. Siemens consent to Buyer s use of the Product in connection with any nuclear facility or application will be subject to additional terms and conditions that Siemens deems necessary to protect its interests. lopeaa100_ _00_00_o00 8 8/2/2016

12 Proposal 23. SURVIVAL. The articles titled Patent and Copyright Infringement, Limitation of Liability, Confidentiality, Delivery; Title; Risk of Loss, Export / Import Compliance, and Nuclear survive termination, expiration or cancellation of this Agreement. PURCHASER's ACCEPTANCE Siemens Industry, Inc. The foregoing is hereby accepted. By (Name of Purchaser) By Title Date Siemens Industry, Inc. SIEMENS STANDARD TERMS AND CONDITIONS OF SALE FOR PRODUCTS July 1, 2016 (Version1.1/Restricted) lopeaa100_ _00_00_o00 9 8/2/2016

13 Project Name: Quote #: Drexel Trash Ohio Labor Center lopeaa100_ _00_00_o00 CONTENTS: PANELBOARD P1 Drawings are for: Approval Record Engineer: Contractor: LAKE ERIE ELECTRIC INC Distributor: THE FURBAY ELECTRIC SUPPLY COMPANY Date: 08/02/2016 Submitted By: Alfredo A. López, PMP, LEED AP Tel. No.: Fax No.: Siemens Industry, Inc 5350 Transportation Blvd Garfield Heights, OH, 44125

14 DESIGNATION(S): H2 PANELBOARD NOTES SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1E27BQ100CTST :1 Indoor :480Y/277 3Ø 4W Wye AC :14 K AIC :100 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS Main : 1 100A /3PBQD MAIN BREAKER 1(1)#8#1 Cu / #6#1/0 Al Branches : 15 BL/BQD PROVISION 3 20A /3PBQD 1 25A /3PBQD MAIN BQD BQD BQD A/3P 20A/3P 25A/3P PROV PROV PROV PROV PROV PROV 20A/3P 20A/3P PROV 14 PROV 16 PROV 18 PROV 20 PROV 22 PROV 24 PROV 26 PROV 28 PROV 30 BQD 10 BQD 12 KIT Options : 1Subfeed/Feedthru Provision 1Master NP Secured Adhesive 1Card HolderStd Plastic Sleeve 1NP Location Trim 1Certification UL 1Std Al/Cu Gnd Connector 1250kA Lighting Panel SPD SPD 250 ka Deep lopeaa NO. REVISIONS DRAWN BY DATE JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 1 OF 4 REV. 1

15 PANELBOARD NOTES SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1E27BQ100CTST :1 Indoor :480Y/277 3Ø 4W Wye AC :14 K AIC :100 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW ABBREVIATIONS A 1 2 BQD 20A/3P B 100A/3P BQD MAIN 3 4 C (1)#8#1 CU / #6#1/0 AL/PH AND N 5 6 A 7 8 BQD 20A/3P B 9 10 C BQD 20A/3P A PROV B PROV C BQD 25A/3P PROV A PROV PROV B PROV PROV C PROV PROV A PROV PROV B PROV PROV C PROV PROV SPD' SURGE PROTECTIVE DEVICE SPD 250 ka JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 2 OF 4 REV. 1

16 CIRCUIT NUMBER UNIQUE ID NO. TRIP AMPS (A) POLES DEVICE TYPE CIRCUIT SCHEDULE INTERRUPT RATING (AIC) METER ACC CT RATING LOAD LUG SIZE PER PHASE 1/3/5 67 _ 3 BQD 7/9/ BQD 14,000 N/A N/A (1)#14#6 CU / #12#6 AL 13/15/ BQD 14,000 N/A N/A (1)#14#6 CU / #12#6 AL _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV CIRCUIT IDENTIFICATION 2/4/ BQD 14,000 N/A N/A (1)#14#6 CU / #12#6 AL 8/10/ BQD 14,000 N/A N/A (1)#14#6 CU / #12#6 AL _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 3 OF 4 REV. 1

17 MASTER DESCRIPTION NAMEPLATEUNIQUE NUMBER ID NO. NAMEPLATE SCHEDULE ENGRAVING 1 ENGRAVING 2 ENGRAVING 3 N1 H2 No LEAVE BLANK MASTER DEVICE NAMEPLATE SIZE COLOR SIZE COLOR 1x3 Black/White Core 1x3 Black/White Core JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 4 OF 4 REV. 1

18 DESIGNATION(S): H1 PANELBOARD NOTES SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1E30JX400CTST :1 Indoor :480Y/277 3Ø 4W Wye AC :14 K AIC :400 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW MAIN JXD6 400A/3P PANELBOARD COMPONENTS Main : 1 400A /3PJXD6 MAIN BREAKER 1(2)3/0500Kcmil Cu/ 4/0500 Al Branches : 18 BL/BQD PROVISION 4 100A /3PBQD BQD BQD A/3P 100A/3P PROV PROV PROV PROV PROV PROV PROV PROV PROV 100A/3P 100A/3P BQD 12 PROV 14 PROV 16 PROV 18 PROV 20 PROV 22 PROV 24 PROV 26 PROV 28 PROV 30 4 BQD 6 KIT Options : 1Subfeed/Feedthru Provision 1Master NP Secured Adhesive 1Card HolderStd Plastic Sleeve 1NP Location Trim 1Certification UL 1Std Al/Cu Gnd Connector 1250kA Lighting Panel SPD SPD 250 ka Deep lopeaa NO. REVISIONS DRAWN BY DATE JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 1 OF 4 REV. 1

19 PANELBOARD NOTES (2)3/0500KCMIL CU/ 4/0500 AL/PH AND N JXD6 400A/3P SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1E30JX400CTST :1 Indoor :480Y/277 3Ø 4W Wye AC :14 K AIC :400 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW ABBREVIATIONS BQD 100A/3P BQD 100A/3P PROV PROV PROV PROV PROV PROV PROV PROV PROV A A A A A B B B B B C C C C C 2 BQD 100A/3P BQD 100A/3P PROV 16 PROV 18 PROV 20 PROV 22 PROV 24 PROV 26 PROV 28 PROV 30 PROV SPD' SURGE PROTECTIVE DEVICE SPD 250 ka JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 2 OF 4 REV. 1

20 CIRCUIT NUMBER UNIQUE ID NO. TRIP AMPS (A) POLES DEVICE TYPE CIRCUIT SCHEDULE INTERRUPT RATING (AIC) METER ACC CT RATING LOAD LUG SIZE PER PHASE 1/3/ BQD 14,000 N/A N/A (1)#8#1 CU / #6#1/0 AL 7/9/ BQD 14,000 N/A N/A (1)#8#1 CU / #6#1/0 AL _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV CIRCUIT IDENTIFICATION 2/4/ BQD 14,000 N/A N/A (1)#8#1 CU / #6#1/0 AL 8/10/ BQD 14,000 N/A N/A (1)#8#1 CU / #6#1/0 AL _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV _ 1 BPROV JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 3 OF 4 REV. 1

21 MASTER DESCRIPTION NAMEPLATEUNIQUE NUMBER ID NO. NAMEPLATE SCHEDULE ENGRAVING 1 ENGRAVING 2 ENGRAVING 3 N1 H1 No LEAVE BLANK MASTER DEVICE NAMEPLATE SIZE COLOR SIZE COLOR 1x3 Black/White Core 1x3 Black/White Core JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. H1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 4 OF 4 REV. 1

22 DESIGNATION(S): M1 PANELBOARD NOTES MAIN QJ2 225A/3P SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1C42QJ225CTST :1 Indoor :208Y/120 3Ø 4W Wye AC :10 K AIC :225 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL 1 3 BL 5 20A/1P BL 7 20A/1P BL 9 20A/1P BL 11 20A/1P BL 13 20A/1P BL 15 20A/1P BL 17 20A/1P BL 19 20A/1P BL 21 20A/1P BL 23 20A/1P BL 25 20A/1P BL 27 20A/1P BL 29 20A/1P BL 31 20A/1P BL 33 20A/1P BL 35 20A/1P BL 37 20A/1P BL 39 20A/1P BL 41 20A/1P 30A/2P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P BL BL BL BL 10 BL 12 BL 14 BL 16 BL 18 BL 20 BL 22 BL 24 BL 26 BL 28 BL 30 BL 32 BL 34 BL 36 BL 38 BL 40 BL 42 BL KIT Main : 1 225A /3PQJ2 MAIN BREAKER 1(1)#6300Kcmil Cu / #4300 Al Branches : 1 30A /2PBL 40 20A /1PBL Options : 1Subfeed/Feedthru Provision 1Master NP Secured Adhesive 1Card HolderStd Plastic Sleeve 1NP Location Trim 1Certification UL 1Std Al/Cu Gnd Connector 1250kA Lighting Panel SPD 10.0 SPD 250 ka 5.75 Deep lopeaa NO. REVISIONS DRAWN BY DATE JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 1 OF 4 REV. 1

23 PANELBOARD NOTES (1)#6300KCMIL CU / #4300 AL/PH AND N QJ2 225A/3P SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1C42QJ225CTST :1 Indoor :208Y/120 3Ø 4W Wye AC :10 K AIC :225 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW BL 30A/2P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P A A A A A A A B B B B B B B C C C C C C C 2 BL 20A/1P 4 BL 20A/1P 6 BL 20A/1P 8 BL 20A/1P 10 BL 20A/1P 12 BL 20A/1P 14 BL 20A/1P 16 BL 20A/1P 18 BL 20A/1P 20 BL 20A/1P 22 BL 20A/1P 24 BL 20A/1P 26 BL 20A/1P 28 BL 20A/1P 30 BL 20A/1P 32 BL 20A/1P 34 BL 20A/1P 36 BL 20A/1P 38 BL 20A/1P 40 BL 20A/1P 42 BL 20A/1P ABBREVIATIONS SPD' SURGE PROTECTIVE DEVICE SPD 250 ka JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 2 OF 4 REV. 1

24 CIRCUIT NUMBER UNIQUE ID NO. TRIP AMPS (A) POLES DEVICE TYPE CIRCUIT SCHEDULE INTERRUPT RATING (AIC) METER ACC CT RATING LOAD LUG SIZE PER PHASE 1/ BL 10,000 N/A N/A (1)#14#6 CU / #12#6 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL CIRCUIT IDENTIFICATION BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 3 OF 4 REV. 1

25 MASTER DESCRIPTION NAMEPLATEUNIQUE NUMBER ID NO. NAMEPLATE SCHEDULE ENGRAVING 1 ENGRAVING 2 ENGRAVING 3 N1 M1 No LEAVE BLANK MASTER DEVICE NAMEPLATE SIZE COLOR SIZE COLOR 1x3 Black/White Core 1x3 Black/White Core JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M1 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 4 OF 4 REV. 1

26 DESIGNATION(S): M2 PANELBOARD NOTES MAIN QJ2 225A/3P SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1C42QJ225CTST :1 Indoor :208Y/120 3Ø 4W Wye AC :10 K AIC :225 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL 3 5 BL 7 9 BL 11 20A/1P BL 13 20A/1P BL 15 20A/1P BL 17 20A/1P BL 19 20A/1P BL 21 20A/1P BL 23 20A/1P BL 25 20A/1P BL 27 20A/1P BL 29 20A/1P BL 31 20A/1P BL 33 20A/1P BL 35 20A/1P BL 37 20A/1P BL 39 20A/1P BL 41 20A/1P 30A/3P 30A/2P 100A/3P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P 20A/1P BL BL 10 BL 12 BL 14 BL 16 BL 18 BL 20 BL 22 BL 24 BL 26 BL 28 BL 30 BL 32 BL 34 BL 36 BL 38 BL 40 BL 42 BL KIT Main : 1 225A /3PQJ2 MAIN BREAKER 1(1)#6300Kcmil Cu / #4300 Al Branches : 1 30A /3PBL 1 100A /3PBL 1 30A /2PBL 34 20A /1PBL Options : 1Subfeed/Feedthru Provision 1Master NP Secured Adhesive 1Card HolderStd Plastic Sleeve 1NP Location Trim 1Certification UL 1Std Al/Cu Gnd Connector 1250kA Lighting Panel SPD 10.0 SPD 250 ka 5.75 Deep lopeaa NO. REVISIONS DRAWN BY DATE JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 1 OF 4 REV. 1

27 PANELBOARD NOTES (1)#6300KCMIL CU / #4300 AL/PH AND N QJ2 225A/3P SECTION :1 OF 1 PANEL TYPE :P1 CATALOG NUMBER ENCLOSURE SYSTEM VOLTAGE IR RATING MAIN BUS BUS MATERIAL FEED MOUNTING SE LABEL SERIES RATED :P1C42QJ225CTST :1 Indoor :208Y/120 3Ø 4W Wye AC :10 K AIC :225 A :Copper Tin :Top :Surface :No :No CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLACEMENT OF BREAKERS ON THE MECHANICAL VIEW BL 30A/3P BL 30A/2P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P BL 20A/1P A A A A A A A B B B B B B B C C C C C C C 2 BL 100A/3P BL 20A/1P 10 BL 20A/1P 12 BL 20A/1P 14 BL 20A/1P 16 BL 20A/1P 18 BL 20A/1P 20 BL 20A/1P 22 BL 20A/1P 24 BL 20A/1P 26 BL 20A/1P 28 BL 20A/1P 30 BL 20A/1P 32 BL 20A/1P 34 BL 20A/1P 36 BL 20A/1P 38 BL 20A/1P 40 BL 20A/1P 42 BL 20A/1P ABBREVIATIONS SPD' SURGE PROTECTIVE DEVICE SPD 250 ka JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 2 OF 4 REV. 1

28 CIRCUIT NUMBER UNIQUE ID NO. TRIP AMPS (A) POLES DEVICE TYPE CIRCUIT SCHEDULE INTERRUPT RATING (AIC) METER ACC CT RATING LOAD LUG SIZE PER PHASE 1/3/ BL 10,000 N/A N/A (1)#14#6 CU / #12#6 AL 7/ BL 10,000 N/A N/A (1)#14#6 CU / #12#6 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL CIRCUIT IDENTIFICATION 2/4/ BL 10,000 N/A N/A (1)#4#1/0 CU / #2#1/0 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL BL 10,000 N/A N/A (1)#14#10 CU / #12#10 AL JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 3 OF 4 REV. 1

29 MASTER DESCRIPTION NAMEPLATEUNIQUE NUMBER ID NO. NAMEPLATE SCHEDULE ENGRAVING 1 ENGRAVING 2 ENGRAVING 3 N1 M2 No LEAVE BLANK MASTER DEVICE NAMEPLATE SIZE COLOR SIZE COLOR 1x3 Black/White Core 1x3 Black/White Core JOB P.O. TIE S.O. Drexel Trash Ohio Labor Center CONTR CONSLT LAKE ERIE ELECTRIC INC Siemens Industry, Inc. Norcross, Georgia CUST. THE FURBAY ELECTRIC SUPPLY COMPANY BY lopeaa1 DATE DWG. NO. M2 lopeaa100_ _00_00_o APP. MFG. LOC. APP. DWG. FILE ENG. LOC. DESIGNATION SHEET 4 OF 4 REV. 1

30 Project Name: Quote #: Drexel Trash Ohio Labor Center lopeaa100_ _00_00_o00 CONTENTS: 3F3Y075D16 Series J Drawings are for: Approval Record Engineer: Contractor: LAKE ERIE ELECTRIC INC Distributor: THE FURBAY ELECTRIC SUPPLY COMPANY Date: 08/02/2016 Submitted By: Alfredo A. López, PMP, LEED AP Tel. No.: Fax No.: Siemens Industry, Inc 5350 Transportation Blvd Garfield Heights, OH, 44125

31 Aluminum K1 3Phase Delta Primary Series J DOE Phase Dry Type Ventilated Transformer Reference Siemens Series below: 3BxxyyyD16 3CxxyyyD16 3FxxyyyD16 3GxxyyyD16 plus others Standard Temp Rise 150 C Reference Number Below: T208B T208F T208I T208K T240B T240E T240H T480E T480J T480M T480P T600I T208D T208G T208J T208L T240D T240F T240I T480G T480K T480N T600G plus others Series J Addendum J4 DOE 2016 Transformer Series J Addendum

32 Quick Reference for J Series Transformers Aluminium D16 Drawings and s AL 3 Phase Primary/ Secondary Primary Secondary Reference Wiring diagram (Tap = diagram #) Page Number AL 3B D/120 Y=T208K, M=T208L J22 AL 3B Y/120 Y=T208B, M=T208F, N=T208I J22 AL 3B Y/277 Y=T208D, M=T208G, N=T208J J22 AL 3C Y/120 Y=T240B, M=T240F, N=T240I J22 AL 3C Y/277 Y=T240D, M=T240E, N=T240H J23 AL 3F D/120 Y=T480G, T=T480N J24 AL 3F Y/120 Y=T480E, T=T480M J23 AL 3F Y/277 Y=T480J, T=T480P J23 AL 3F Y/219 T=T480K J24 AL 3G Y/120 T=T600G J24 AL 3G Y/277 T=T600I J24 Alluminium Reference Code / Table Drawing Kfactor Std = K1 K4 K13 K20 Temp Rise degrees C 150 (Std.) Page Numbers K1 J201 J202 J203 J4 / J5 / J6 K4 J209 J210 J211 J7 / J8 / J9 K13 J212 J213 J228 J10 / J11 / J12 K20 J214 J215 J230 J13 / J14 / J15 Copper D16 Drawings and s CU 3 Phase Primary/ Secondary Primary Secondary Reference Wiring diagram (Tap = diagram #) Page Number CU 3B D/120 Y=T208K, M=T208L J22 CU 3B Y/120 Y=T208B, M=T208F, N=T208I J22 CU 3B Y/277 Y=T208D, M=T208G, N=T208J J22 CU 3C Y/120 Y=T240B, M=T240F, N=T240I J22 CU 3C Y/277 Y=T240D, M=T240E, N=T240H J23 CU 3F D/120 Y=T480G, T=T480N J24 CU 3F Y/120 Y=T480E, T=T480M J23 CU 3F Y/277 Y=T480J, T=T480P J23 CU 3F Y/219 T=T480K J24 Copper Reference Code / Table Drawing Kfactor Std = K1 K4 K13 K20 Temp Rise degrees C 150 (Std.) Page Numbers K1 J216 J217 J218 J16 / J17 / J18 K4 J221 J222 J223 J19 / J20 / J21 Series J Addendum CU 3G Y/120 T=T600G J24 CU 3G Y/277 T=T600I J24 K13 J224 J225 J229 J22 / J23 / J24 K20 J226 J227 J231 J25 / J26 / J27 J2 DOE 2016 Transformer Series J Addendum

33 s T208A & * Primary: 208 Delta Secondary: 480Y/277 T208B & * Primary: 208 Delta Secondary: 208Y/120 T208D & * Primary: 208 Delta Secondary: 480Y/277 Primary Jumper Primary Lines Taps To X1, X2, X X1, X2, X X1, X2, X3 480 H1, H2, H3 277 Between H0 and 1 Phase H1 or H2 or H3 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X3 480 H1, H2, H3 277 Between H0 and 1 Phase H1 or H2 or H3 T208F & * Primary: 208 Delta Secondary: 208Y/120 T208G & * Primary: 208 Delta Secondary: 480Y/277 T208H & * Primary: 208 Delta Secondary: 208Y/120 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X X1, X2, X X1, X2, X X1, X2, X3 480 H1, H2, H3 277 Between H0 and 1 Phase H1 or H2 or H3 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Series J Addendum T208I & * Primary: 208 Delta Secondary: 208Y/120 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 T208J & * Primary: 208 Delta Secondary: 480Y/277 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X3 480 H1, H2, H3 277 Between H0 and 1 Phase H1 or H2 or H3 T208K & * Primary: 208 Delta Secondary: 240 Delta/ 120 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X3 240 H1, H2, H3 120 H1 and H4 or 1 Phase H2 and H4 J28 DOE 2016 Transformer Series J Addendum

34 s T208L & * Primary: 208 Delta Secondary: 240 Delta/ 120 T240A & * Primary: 240 Delta Secondary: 208Y/120 T240B & * Primary: 240 Delta Secondary: 208Y/120 Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 H1 and H4 or 1 Phase H2 and H4 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 T240D & * Primary: 240 Delta Secondary: 480Y/277 T240E & * Primary: 240 Delta Secondary: 480Y/277 T240F & * Primary: 240 Delta Secondary: 208Y/120 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X3 480 H1, H2, H3 277 Between H0 and 1 Phase H1 or H2 or H3 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X X1, X2, X X1, X2, X X1, X2, X3 480 H1, H2, H3 277 Between H0 and 1 Phase H1 or H2, or H3 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2, or X3 T240G & * Primary: 240 Delta Secondary: 480Y/277 Primary Jumper Primary Lines Taps To X1, X2, X X1, X2, X X1, X2, X3 480 H1, H2, H3 277 Between X0 and 1 phase H1 or H2 or H3 T240H & * Primary: 240 Delta Secondary: 480Y/277 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X3 480 H1, H2, H3 277 Between H0 and 1 Phase H1 or H2 or H3 T240I & * Primary: 240 Delta Secondary: 208Y/120 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Series J Addendum DOE 2016 Transformer Series J Addendum J29

35 s T460A & * Primary: 460 Delta Secondary: 220Y/127 T480A & * Primary: 480 Delta Secondary: 208Y/120 T480B & * Primary: 480 Delta Secondary: 240 Delta Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 220 X1, X2, X3 127 Between X0 and 1 Phase X1 or X2 or X3 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 phase X1 or X2 or X3 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 240 X1, X2, X3 T480C & * Primary: 480 Delta Secondary: 480Y/277 T480D & * Primary: 480 Secondary: 208Y/120 T480E & * Primary: 480 Delta Secondary: 208Y/120 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 277 Between X0 and 1 phase X1 or X2 or X3 Primary Interconnect Supply Lines 480 H1 & 6 H1, H2, H3 H2 & 4 H3 & H1 & 9 H1, H2, H3 H2 & 7 H3 & H1 & 12 H1, H2, H3 H2 & 10 H3 & 11 Load Lines 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Series J Addendum T480F & Primary: 480 Delta Secondary: 480 Delta Primary On Each Coil Primary Lines Jumper Between Taps H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 T480G & * Primary: 480 Delta Secondary: 240 Delta/ 120 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 240 X1, X2, X3 120 X1 and X4 or 1 Phase X2 and X4 T480I & * Primary: 480 Delta Secondary: 380Y/220 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 380 X1, X2, X3 220 Between X0 and 1 Phase X1 or X2 or X3 J30 DOE 2016 Transformer Series J Addendum

36 s T480J & * Primary: 480 Delta Secondary: 480Y/277 T480K & * Primary: 480 Delta Secondary: 380Y/220 Group T480L & * Primary: 480 Delta Secondary: 400Y/231 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 277 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 380 X1, X2, X3 220 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Between Taps H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 400 X1, X2, X3 231 Between X0 and 1 Phase X1 or X2 or X3 T480M & * T480N & * T480P & * Primary: 480 Delta Secondary: 208Y /120 Primary: 480 Delta Secondary: 240 Delta/ 120 Primary: 480 Delta Secondary: 480Y /277 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 240 X1, X2, X3 120 X1 and X4 or 1 Phase X2 and X4 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 277 Between X0 and 1 Phase X1 or X2 or X3 T480Q & * Primary: 480 Delta Secondary: 480 Delta Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 T480R & * Primary: 480 Delta Secondary: 600 Delta Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H3 600 X1, X2, X3 T480T & * Primary: 480 Delta Secondary: 600 Delta Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X3 600 H1, H2, H3 Series J Addendum DOE 2016 Transformer Series J Addendum J31

37 s T480U & * Primary: 480 Delta Secondary: 400Y/231 T480V & * Primary: 480 Delta Secondary: 600 Delta T600A & * Primary: 600 Delta Secondary: 208Y/120 Primary On Each Coil Primary Lines Jumper Taps To H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 400 X1, X2, X3 231 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To X1, X2, X X1, X2, X X1, X2, X X1, X2, X X1, X2, X3 600 H1, H2, H3 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 phase X1 or X2 or X3 T600B & * Primary: 600 Secondary: 208Y/120 T600D & * Primary: 600 Secondary: 240 Delta/ 120 T600E & * Primary: 600 Delta Secondary: 240 Delta Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 240 X1, X2, X3 120 X1 and X4 or 1 Phase X2 and X4 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 240 X1, X2, X3 Series J Addendum T600F & * Primary: 600 Secondary: 240 Delta/ 120 Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 240 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 T600G & * Primary: 600 Secondary: 208Y/120 Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 208 X1, X2, X3 120 Between X0 and 1 Phase X1 or X2 or X3 T600H & * Primary: 600 Delta Secondary: 480Y/277 Primary Jumper Primary Lines Taps to H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 277 Between X0 and 1 Phase X1 or X2 or X3 J32 DOE 2016 Transformer Series J Addendum

38 s T600I & * Primary: 600 Secondary: 480Y/277 T600J & * Primary: 600 Delta Secondary: 240 Delta T600K & * Primary: 600 Secondary: 480 Delta Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 277 Between X0 and 1 Phase X1 or X2 or X3 Primary Jumper Primary Lines Taps To H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 T600L & * Primary: 600 Delta Secondary: 480 Delta T600M & * Primary: 600 Secondary: 480Y/277 Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 Primary On Each Coil Primary Lines Jumper Taps To Between Lines H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H H1, H2, H3 480 X1, X2, X3 277 Between X0 and 1 Phase X1 or X2 or X3 Series J Addendum DOE 2016 Transformer Series J Addendum J33

39 Project Name: Quote #: Drexel Trash Ohio Labor Center lopeaa100_ _00_00_o00 CONTENTS: 200A 3P 600V 3W FUSED HD TYPE 3R Drawings are for: Approval Record Engineer: Contractor: LAKE ERIE ELECTRIC INC Distributor: THE FURBAY ELECTRIC SUPPLY COMPANY Date: 08/02/2016 Submitted By: Alfredo A. López, PMP, LEED AP Tel. No.: Fax No.: Siemens Industry, Inc 5350 Transportation Blvd Garfield Heights, OH, 44125

40

41 Heavy Duty Safety Switch Type VBII, 200 Amp, Type 3R (Outdoor) Standards and Ratings UL Listed under file #E4776 Meets UL98 for switches and UL 50 for enclosures Meets NEMA Standard KS1 for enclosed switches Meets NEC wire bending space requirements Rated 10,000 AIC with Class H fuses or 200,000 AIC with Class R, T and J fuses Rated 100,000 AIC at 600Vdc with Class R or J fuses I 2 t rated (Amps 2 x Seconds = 2,000,000) 12X overload current rating exceeds 10X industry standard General Information Horsepower Ratings Suitable for use as service entrance equipment Features Quickmake and break switching action Double break visible blade design Highly visible ON/OFF indication Rugged installer friendly enclosure design Modular design allows quick and easy replacement of parts Front removable lugs which can easily be converted to copper body or compression type lugs Defeatable dual cover interlock Catalog Shipping Number Description Weight (lbs.) HF224NR Pole, 3 Wire, Fusible 48 HF324NR Pole, 4 Wire, Fusible 50 HF364R Pole, 3 Wire, Fusible 49 HF364NR Pole, 4 Wire, Fusible 50 HNF364R Pole, 3 Wire, NonFusible 47 Catalog 1 Phase, 240V AC 3 Phase, 240V AC 250V Number Std Max Std Max DC HF224NR HF324NR Horsepower Ratings Catalog 3 Phase, 480V AC 3 Phase, 600V AC 600V Number Std Max Std Max DC HF364R HF364NR HNF364NR Mechanical Lug Wire Ranges (75 C, Cu/Al) Description Wire Range Line, Load, Neutral #6 AWG 300 Kcmil 200% and Standard Neutral Ground #141/0AWG Ground Lug Kit #144 AWG 200% Neutral (2) #6 AWG 300 Kcmil 1 These switches are UL Listed for application on grounded B phase systems. 2 Dual horsepower ratings: Std applies when nontime delay fuses are installed. Max applies when timedelay fuses are installed. 3 Horsepower ratings listed also apply to Design E motors with no derating. 4 Also rated 60 HP on 3phase, 240V AC systems. Product Specification Sheet HD200.3 Answers for industry.

42 Product Specification Sheet #HD200.3 (page 2 of 3) Accessories Replacement Parts Catalog Catalog Number Description Number Description HA One Normally Open and Closed Auxiliary Switches HFB64 Fusible Line Side Replacement Base (HF224NR, HA Two Normally Open and Closed Auxiliary Switches HF324NR, HF364R, HF364NR) HA Low Voltage Auxiliary Switch HBB64 Fusible Load Side Replacement Base (HF224NR, HG61234 Equipment Ground Lug Kit HF324NR, HF364R, HF364NR) HG Isolated Equipment Ground Lug Kit HNB64 NonFusible Replacement Base (HNF364R) HN64 Neutral Kit HH64 Replacement Handle/Handle Guard HN % Neutral Kit HL64 Replacement Lugs (3 lugs per kit) HT Volt Class T Fuse Clip Kit (1Pole per kit) (HF224NR, HF324NR) HM64 1 Replacement Mechanism Replacement Door HT Volt Class T Fuse Clip Kit (1Pole per kit) (HF364R, HF364NR) HR64 Class R Fuse Clip Kit (3 fuse clips per kit) (HF224NR, HF324NR HF364R, HF364NR) HLC64 Copper Lug Kit (9 lugs per kit) ECHS Type HS Outdoor Hub ECHS Type HS Outdoor Hub Compression Lugs Wire Burndy ThomasBetts Ilsco Size CU ONLY CU/AL CU ONLY CU/AL CU ONLY CU/AL YA2CL Box YA2CA TB CRB2 IACL2 #2 YA2C CRB2L ACN2 #1 YA1CL Box YA1CA CRA138 ACN1 YA1C 54947BE CRA1L 1/0 YA25L Box YA25A TB CRA0 IACL1/0 YA BE CRA1/0L ACN1/0 YA26L3 YA26A CRA2/0 ACL2/0 2/0 YA CRA2/0L IACL2/ BE 3/0 YA27L3 YA27A TB CRC3/0 IACL3/0 YA CRB3/0L ACL3/0 4/0 YA28L3 YA28A CRC4/0 IACL4/0 YA28TC CRB4/0L ACL4/0 250 Kcmil YA29L CRA250 IACL BE CRA250L 300 Kcmil Place Door at the end of the switch catalog number.

43 Product Specification Sheet #HD200.3 (page 3 of 3) Dimension Drawing 7.30 [ 185 ] PROVISION FOR TYPE HS HUB.65 [ 17 ] 1.32 [ 34 ] 7.19 [ 183 ] [ 405 ] SEE DETAIL C 5.10 [ 130 ].35 [ 9 ] 4.39 [ 112 ] [ 313 ] [ 258 ] 6.36 [ 162 ].33 DIA (4) [ 8 ] OF BOX [ 570 ] [ 789 ].91 [ 23 ] A LEFT & RIGHT SIDE [ 759 ] A (2) [ 315 ] 2.31 [ 59 ] 8.19 [ 208 ] 3.68 [ 93 ] 5.50 [ 140 ].88 DIA KNOCKOUT.87 [ 22 ] 2.45 [ 62 ] 3.10 [ 79 ] 4.88 [ 124 ] Dimensions shown in inches and millimeters ( ). Dimension shown accurate to + ¹ ₈ inch [ 208 ] [ 432 ] [ 371 ] 5.50 [ 140 ] 4.88 [ 124 ].25 DIA GROUND KNOCKOUT A (3).81 [ 21 ].20 [ 5 ] KNOCKOUT CONDUIT CODE SIZE A (Tangential) [ 111 ] 1.44 [ 37 ].47 [ 12 ] 9.74 [ 247 ] LINE SIDE WIRE BEND DETAIL C.81 [ 21 ].38 DIA [ 10 ] LOAD SIDE WIRE BEND 240V Fused 7.87 (200) (263) 600V Fused 7.87 (200) 7.84 (199) NonFused 7.87 (200) (402) 1.00 DIA [ 25 ] Enclosure: Galvanized Steel.054 (17 Gauge) Finish: ANSI Grey #61 Paint Siemens Industry, Inc. Building Technologies Division 5400 Triangle Parkway Norcross, GA Subject to change without prior notice All rights reserved Printed in USA 2009 Siemens Industry, Inc. Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective copanies. Specifications subject to change without notice.

44 Project Name: Quote #: Drexel Trash Ohio Labor Center lopeaa100_ _00_00_o00 CONTENTS: 100A 3P 240V 4W FUSED HD TYPE 1 Drawings are for: Approval Record Engineer: Contractor: LAKE ERIE ELECTRIC INC Distributor: THE FURBAY ELECTRIC SUPPLY COMPANY Date: 08/02/2016 Submitted By: Alfredo A. López, PMP, LEED AP Tel. No.: Fax No.: Siemens Industry, Inc 5350 Transportation Blvd Garfield Heights, OH, 44125

45 Heavy Duty Safety Switch Type VBII, 100 Amp, Type 1 (Indoor) Standards and Ratings UL Listed under file #E4776 Meets UL98 for switches and UL 50 for enclosures Meets NEMA Standard KS1 for enclosed switches Meets NEC wire bending space requirements Rated 10,000 AIC with Class H fuses or 200,000 AIC with Class R, T and J fuses Rated 100,000 AIC at 600Vdc with Class R or J fuses I 2 t rated (Amps 2 x Seconds = 500,000) 12X overload current rating exceeds 10X industry standard Suitable for use as service entrance equipment Features Quickmake and break switching action Double break visible blade design Highly visible ON/OFF indication Rugged installer friendly enclosure design Modular design allows quick and easy replacement of parts Front removable lugs which can easily be converted to copper body or compression type lugs Defeatable dual cover interlock General Information Catalog Shipping Number Description Weight (lbs.) HF223N Pole, 3 Wire, Fusible 23 HF323N Pole, 4 Wire, Fusible 25 HF Pole, 2 Wire, Fusible 26 HF Pole, 3 Wire, Fusible 24 HF363N Pole, 4 Wire, Fusible 25 HNF Pole, 2 Wire, NonFusible 25 HNF Pole, 3 Wire, NonFusible 23 Horsepower Ratings Catalog 1 Phase, 240V AC 3 Phase, 240V AC 250V Number Std Max Std Max DC HF223N 7¹ ₂ HF323N 7¹ ₂ Horsepower Ratings Catalog 3 Phase, 480V AC 3 Phase, 600V AC 600V Number Std Max Std Max DC HF HF HF363N HNF HNF Mechanical Lug Wire Ranges (60/75 C, Cu/Al) Description Wire Range Line, Load Neutral Ground #121/0 (Al) AWG or #141/0 (Cu) AWG #144 AWG 1 These switches are UL Listed for application on grounded B phase systems. 2 Dual horsepower ratings: Std applies when nontime delay fuses are installed. Max applies when timedelay fuses are installed. 3 Horsepower ratings listed also apply to Design E motors with no derating. 4 Also rated 20HP at 250V DC. 5 Also rated 30HP at 480V and 40HP at 600V, 1 phase. 6 Also rated 40HP on 3phase, 240V AC systems. Product Specification Sheet HD100.1 Answers for industry.

46 Product Specification Sheet #HD100.1 (page 2 of 2) Accessories Catalog Number Description HA One Normally Open and Closed Auxiliary Switches HA Two Normally Open and Closed Auxiliary Switches HA Low Voltage Auxiliary Switch HG61234 Equipment Ground Lug Kit HG Isolated Equipment Ground Lug Kit HP63 Fuse Puller (3 per kit) (HF223N, HF323N,HF263,HF363, HF363N) HN623 Neutral Kit HR63 Class R Fuse Clip Kit (3 fuse clips per kit) (HF223N, HF323N, HF263, HF363, HF363N) HT Volt Class T Fuse Clip Kit (1Pole per kit) (HF223N, HF323N) HT Volt Class T Fuse Clip Kit (1Pole per kit) (HF263, HF363, HF363N) HLC63 Copper Lug Kit (9 lugs per kit) HCL623 Compression Lug Neutral Barrier Kit Compression Lugs 2 Replacement Parts Catalog Number Description HFB63 Fusible Line Side Replacement Base (HF223N, HF323N, HF263,HF363, HF363N) HBB63 Fusible Load Side Replacement Base (HF223N, HF323N, HF263, HF363, HF363N) HNB623 NonFusible Replacement Base (HNF263, HNF363) HH6123 Replacement Handle/Handle Guard HL63 Replacement Lugs (3 lugs per kit) HM6123 Replacement Mechanism 1 Replacement Door Wire Burndy ThomasBetts Ilsco Size CU Only CU/AL CU Only CU/AL CU Only CU/AL #6 YA6CL BOX YA6CA CRB6 ACL6 YA6C 54905BE CRB6L #4 YA4CL BOX YA4CA CRB4 ACL4 YA4C 54906BE CRB4L #2 YA2CL2 BOX YA2CA CRB2 ACL2 YA2C CRB2L #1 YA1CL CRB114 YA1C 54947BE CRA1L 1/ Place Door at the end of the switch catalog number. 2 If compression lugs are used for the neutral, order compression lug neutral barrier kit HCL623. Dimension Drawing 1.88 [ 48 ] 4.71 [ 120 ] [ 271 ] 5.68 [ 144 ] 1.61 [ 41 ] SEE DETAIL C 1.19 [ 30 ] 2.68 [ 68 ] [ 258 ] 8.25 [ 210 ] 5.05 [ 128 ].25 DIA GROUND KNOCKOUT TOP & BOTTOM 6.52 [ 166 ].98 [ 25 ] [ 305 ].88 DIA KNOCKOUT B TOP & BOTTOM A (2) TOP & BOTTOM 27 DIA (3) 7 ] 1.21 [ 31 ] 2.96 [ 75 ] OF BOX 7.00 [ 178 ] 3.50 [ 89 ] B (4) [ 475 ] Dimensions shown in inches and millimeters ( ). Dimension shown accurate to + ¹ ₈ inch [ 492 ] 1.51 [ 38 ] [ 588 ] B (2) LEFT& RIGHT SIDE 8.76 [ 223 ] 2.42 [ 62 ] 8.35 [ 212 ].85 [ 22 ] DIA KNOCKOUT CONDUIT CODE SIZE A (Tangential) B (Tangential) [ 62 ] 2.45 [ 62 ] [ 557 ] LINE SIDE WIRE BEND 1.94 [ 49 ] 2.88 [ 73 ].65 [ 16 ] LOAD SIDE WIRE BEND 240V Fused 6.07 (154) 8.10 (205) 600V Fused 6.07 (154) 6.10 (155) NonFused 6.07 (154) (291).28 [ 7 ] 9.64 [ 245 ] DETAIL C 2.88 [ 73 ].27 DIA [ 7 ].75 [ 19 ].25 [ 6 ] Enclosure: Cold Rolled Steel.054 Thick (17 Gauge) Finish: ANSI Grey #61 Paint Siemens Industry, Inc. Building Technologies Division 5400 Triangle Parkway Norcross, GA Subject to change without prior notice All rights reserved Printed in USA 2009 Siemens Industry, Inc. Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective copanies. Specifications subject to change without notice.

47

48 Project Name: Quote #: Drexel Trash Ohio Labor Center lopeaa100_ _00_00_o00 CONTENTS: 30A 3P 240V 4W FUSED HD TYPE 1 Drawings are for: Approval Record Engineer: Contractor: LAKE ERIE ELECTRIC INC Distributor: THE FURBAY ELECTRIC SUPPLY COMPANY Date: 08/02/2016 Submitted By: Alfredo A. López, PMP, LEED AP Tel. No.: Fax No.: Siemens Industry, Inc 5350 Transportation Blvd Garfield Heights, OH, 44125

49 Heavy Duty Safety Switch Type VBII, 30 Amp, Type 1 (Indoor) Standards and Ratings UL Listed under file #E4776 Meets UL98 for switches and UL 50 for enclosures Meets NEMA Standard KS1 for enclosed switches Meets NEC wire bending space requirements Rated 10,000 AIC with Class H fuses or 200,000 AIC with Class R and J fuses Rated 100,000 AIC at 600Vdc with Class R or J fuses I 2 t rated (Amps 2 x Seconds = 50,000) 12X overload current rating exceeds 10X industry standard Suitable for use as service entrance equipment General Information Horsepower Ratings Features Quickmake and break switching action Double break visible blade design Highly visible ON/OFF indication Rugged installer friendly enclosure design Modular design allows quick and easy replacement of parts Front removable wire grips which can easily be converted to copper body or compression type lugs Defeatable dual cover interlock Catalog Shipping Number Description Weight (lbs.) HF221N Pole, 3 Wire, Fusible 12 HF321N Pole, 4 Wire, Fusible 14 HF Pole, 2 Wire, Fusible 15 HF Pole, 3 Wire, Fusible 14 HF361N Pole, 4 Wire, Fusible 14 Catalog 1 Phase, 240V AC 3 Phase, 240V AC 250V Number Std Max Std Max DC HF221N 1¹ ₂ 3 3 7¹ ₂ 5 HF321N 1¹ ₂ 3 3 7¹ ₂ 5 Horsepower Ratings Catalog 3 Phase, 480V AC 3 Phase, 600V AC 600V Number Std Max Std Max DC HF HF ¹ ₂ 20 HF361N ¹ ₂ 20 Mechanical Lug Wire Ranges (60/75 C, Cu/Al) Description Line, Load Neutral Ground Wire Range #126 AWG (Al) or #146 AWG (Cu) #144 AWG 1 These switches are UL Listed for application on grounded B phase systems. 2 Dual horsepower ratings: Std applies when nontime delay fuses are installed. Max applies when timedelay fuses are installed. 3 Horsepower ratings listed also apply to Design E motors with no derating. 4 Also rated 5HP at 250V DC. 5 Also rated 7¹ ₂ HP at 480V, 1 phase and 10HP at 600V, 1 phase. Product Specification Sheet HD30.2 Answers for industry.

50 Product Specification Sheet #HD30.2 (page 2 of 2) Accessories Catalog Number HA HA HA HG61234 HG HP61 HN612 HR21 HR612 HLC612 HCL612 Description One Normally Open and Closed Auxiliary Switches Two Normally Open and Closed Auxiliary Switches Low Voltage Auxiliary Switch Equipment Ground Lug Kit Isolated Equipment Ground Lug Kit Fuse Puller (3 per kit) Neutral Kit 240 Volt Class R Fuse Clip Kit (3 fuse clips per kit) (HF221N, HF321N) 600 Volt Class R Fuse Clip Kit (3 fuse clips per kit) (HF261, HF361, HF361N) Copper Lug Kit (9 lugs per kit) Compression Lug Neutral Barrier Kit Replacement Parts Catalog Number Description HFB Volt Line Side Replacement Base (HF221N, HF321N) HBB Volt Load Side Replacement Base (HF221N, HF321N) HFB Volt Line Side Replacement Base (HF261, HF361, HF361N) HBB Volt Load Side Replacement Base (HF261, HF361, HF361N) HH6123 Replacement Handle/Handle Guard HL612 Replacement Lugs (3 lugs per kit) HM6123 Replacement Mechanism 1 Replacement Door Compression Lugs 2 Wire Burndy ThomasBetts Ilsco Size CU Only CU/AL CU Only CU/AL CU Only CU/AL # #8 YA8CL BOX CRA8 ACL8 YA8CL1 BOX ACN # Place DOOR at the end of the switch catalog number. 2 If compression lugs are used for the neutral, order compression lug neutral barrier kit HCL612. Dimension Drawing 1.88 [ 48 ] 1.04 [ 26 ].27 DIA (3) [7].79 [ 20 ] 3.21 [ 82 ] 2.42 [ 62 ] 7.67 [ 195 ] 4.34 [ 110 ] OF BOX 4.84 [ 123 ] [ 258 ] SEE DETAIL C [ 209 ] [ 8 ] 1.35 [ 34 ] A (4) [ 257 ] [ 315 ].94 [ 24 ].82 [ 21 ] [ 393 ] 4.07 [ 103 ] 1.90 [ 48 ] 8.35 [ 212 ] 5.05 [ 128 ] 1.46 [ 37 ] B (2) LEFT & RIGHT SIDE.91 [ 23 ] 1.46 [ 37 ] [ 362 ] 5.95 [ 151 ].91 [ 23 ] 1.51 [ 38 ] 1.80 [ 46 ].65 [ 16 ] 9.01 [ 229 ].28 [ 7 ] 6.64 [ 169 ] 1.80 [ 46 ].27 DIA [ 7 ].75 [ 19 ].25 DIA GROUND KNOCKOUT TOP & BOTTOM B (3) TOP & BOTTOM.25 [ 6 ] DETAIL C Dimensions shown in inches and millimeters ( ). Dimension shown accurate to + ¹ ₈ inch. KNOCKOUT CONDUIT CODE SIZE A (Concentric) B (Tangential) LINE SIDE LOAD SIDE WIRE BEND WIRE BEND 240V 3.02 (77) 5.36 (136) 600V 3.02 (77) 2.61 (66) Enclosure: Cold Rolled Steel.054 Thick (17 Gauge) Finish: ANSI Grey #61 Paint Siemens Industry, Inc. Building Technologies Division 5400 Triangle Parkway Norcross, GA Subject to change without prior notice All rights reserved Printed in USA 2009 Siemens Industry, Inc. Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective copanies. Specifications subject to change without notice.

51 VacuBreak Fusible Panel Units Selection and Application Guide

52 Sentron TM High Contact Pressure Switch Features UL Listed Switch Design Visible Contacts Suitable For Many Bolted Switch Applications Field Installable Shunt Trip and Auxiliary Switch Accessory Kits Available As F2 Panelboard Main Installs in Existing Siemens Switchboards Can Mix With Other 30 through 600 Ampere Switches, and 100 Through 1200 Ampere Breakers Horizontally Mounted Units Fit In A Standard 38 Wide Distribution Section 16 1/4 Mounting Height Smallest 1200A Design In The Industry Field Reversible Horizontally Mounted Design For Left Or Right Hand Cabling Contents Sentron High Contact Pressure Switch Inside Front Cover Fusible Panelboard/Switchboard Features VacuBreak Clampmatic Design and Operation VacuBreak 12 Panel 240V AC Switches & Accessories Panel Switch Dimensions VacuBreak 17 Panel 240V AC Switches & Accessories Panel 240V AC Switch Dimensions VacuBreak 17 Panel 600V AC Switches & Accessories Panel 600V AC Switch Dimensions Main Switch 600V AC Dimensions Panelboard/Switchboard HCP Switches & Accessories HCP Switch Horizontal and Group Mounting Assembly VacuBreak 21 Panel 240 and 600V AC Switches Panelboard Units 240V 600V AC Dimensions Critical Pan Dimensions 12 and 17 Units Fuse Information The Right Combination ForThe Best Performance Guide Form Specifications Catalog Number Breakdown Explanation Back Cover NOTE: Information related to specific catalog numbers does not guarantee product availability. Technical information may change due to product revisions. Consult Siemens sales office concerning any variation of product information contained herein.

53 Fusible Panelboard and Switchboard Switch Features Exclusive VacuBreak Clampmatic Arc Control Hazardous switching arcs are safely confined and controlled in the VacuBreak chamber. NEMA Phasing All line connections are phased as per NEMA Standards, I.E., left to right and top to bottom as you face the unit. Pressure Terminal Connectors Suitable for aluminum or copper (100 Amps and larger). All Terminal Connectors 200 Amps and larger are removable. Connection Screws Bullet nosed for positive location and seating of screw. QuickMake QuickBreak Assured by design of cam mechanism and powerful springs. Positive operation in ON or OFF position results from design of the cross arm and VacuBreak head linkage. Easy Mounting Mounting feet have captive bullet nosed screws added, which seat quickly and positively, reducing installation time. Padlocking Member Provides easier locking of handle in the ON or OFF position. Fiber End Barriers Insulated End Barriers prevent damage to wire during installation and are designed with openings large enough to accommodate removable wire grips (200 Amps and larger units). High Pressure Spring Reinforced Copper Fuse Clips Provided extra pressure at the contact points Fuse clips are removable from the front in 7 1/2 and 10 units and from the rear of 5 units. Voidable Cover Interlock Permits only authorized personnel to void the door interlock and open door with switch ON. Fool proof mechanism will not permit door to be closed with handle in the wrong position. 1

54 VacuBreak Clampmatic Design and Operation Siemens exclusive VacuBreak switch combines the latest in fusible technology with Clampmatic action for quick make/quick break performance and reliability. Quick because the unique inseries twin arcs of the Clampmatic action extinguish much faster than the long arc common to other designs and clean because the arc surfaces are separate from the continuous current carrying contact surface. Shorter arcs minimize carbon buildup, and the burnishing effect of the sliding action keeps the contacts smooth. Exclusive VacuBreak action confines and controls arcing through a combination of four effective art interruption methods. Enclosed Art Chamber, DoubleBreak Action, Magnetic BlowOut Force and Controlled Arcing Surfaces. Enclosed Arc Chamber The VacuBreak Head, made of strong Melamine or Glass Polyester insulating material, completely encloses the switching contacts. Specifically designed to isolate and temper arcing effects at contactbreak when switching contacts and burning action of the arcs on the switching contacts caused by oxidation. In addition, this arcsecluding enclosure effectively shields the balance of the switch unit. DoubleBreak Action DoubleBreak action refers to the formation of two separate arcs in series at the switching contacts. As the head moves to the OFF position, the movable contact reaches a point in its travel where it breaks contact with both the stationary line and load jaws.at that instant, an arc is formed between the movable contact and each of the stationary contacts. SeriesArcing permits speedier arc interruption because it doubles the breakdistance or arc path. Magnetic BlowOut Force As in any electrical conductor, a magnetic field surrounds each of the arcs within the VacuBreak Head. Since these fields are in opposition to each other, the arc is forced outward against the enclosing head material. Heat transference between the arcs and the head material speeds up the rate of gas deionization.this action also further increases the length the arc must travel by forcing it to take a curved path. Controlled Arcing Surfaces The presence of the arcs, even for the infinitesimal time that they are in existence, may result in some pitting and burning at the contact points. Movable contact and stationary jaws were specially designed with beveled edges on which the arcs can extinguish leaving the main contact surfaces smooth and clean. Arc Chamber Load Full ON Position Arc Control Section Line and Load Jaws Seal Arc Chamber Load Breaking The Circuit Movable Contact Partitioned Arc Chamber Load Partition Divides Chamber Arc Into Isolating 2 Cells Line Load and Jaws Line Line Stationary Line Jaws and Support Load and Moving Guide Arc the Chamber Line 2 Full OFF Position

55 Clampmatic Pressure Spring Action To avoid overheating at the contact points, it is essential that a bolttight pressure be developed and maintained while the switch is in the ON position, even after repeated operations. At the same time, the pressure at the contact points must be released quickly so as not to interfere with the quickbreak mechanism when the unit is switched to the OFF position.with the development of theclampmaticpressurespring Action both of these requirements have been effectively and successfully fulfilled in all VacuBreak Units. The Clampmatic pressure unit is a U shaped special spring located at the top of the VacuBreak Head arc chamber. As the Head is moved to the ON position, the movable contact is guided into position between the stationary line and load jaws and aligned prior to the time the Clampmatic spring is forced over the outside edges of the stationary line and and load jaws and clamps the movable contact in position.the beveled edges of the Clampmatic spring and the switch jaws allow the spring to guide itself into position. In the full ON position, the Clampmatic spring applies pressure against the beveled surfaces of the switch jaws. When the Unit is switched OFF the Clampmatic spring slides of the stationary jaws releasing the pressure on the movable contact before it begins its movement to the OFF position. In this way, the Clampmatic spring does not interfere with or delay the quickbreak action of the operation mechanism. Vacu Break Head The combination of VacuBreak Arc Control and Clampmatic Pressure Spring Action on all Siemens Vacu Break units affords an unequaled performance for switching applications in the low voltage field. Clampmatic Spring Movable Contact Slug Center Insulating Barrier Stationary Line Side Jaw Exclusive VacuBreak Action confines and controls arcing through a combination of four effective arc interruption methods: Enclosed Arc Chamber, Stationary Load Side Jaw DoubleBreak Action, Magnetic Blow Out Force and Controlled Arcing Surfaces. 3

56 12 VacuBreak Panel 240V AC 240V AC 12 Panel Dimensions Horsepower Rating Catalog No. of (inches) 240V AC Number Amperes Poles Branches H W D Std. Max. DC 250V V2A V2A V2B V2B V2B3211R V2B V2B V2B3212R V2B V2B V2B3222R V2E V2E V2E V2F Main Switch (Horizontal Mounted Back Connected) V2F3204MS Note: Order 2 Pole Units by adding appropriate connection designation LM, LR or MR (indicating Left, Middle and Right Facing the panel). Switch setup for Rfuse application only. 4

57 12 VacuBreak Accessories Accessories 240V AC VacuBreak 12 Panel VacuBreak Depth JFuse RFuse TFuse Number and Ranges Catalog Number Extension Kit Adaptor Kit Adaptor Kit Adaptor Kit Lugs Per Pole V2A2211 W43000 (1)#14#8 AWG CU V2A3211 W43000 (1)#14#8 AWG CU V2B2211 W43002 (1)#14#4 AWG CU V2B3211 W43002 (1)#14#4 AWG CU V2B3211R W43002 Factory Installed (1)#14#4 AWG CU V2B2212 W43002 (1)#14#4 AWG CU V2B3212 W43002 (1)#14#4 AWG CU V2B3212R W43002 Factory Installed (1)#14#4 AWG CU V2B2222 W43002 (1)#14#4 AWG CU V2B3222 W43002 (1)#14#4 AWG CU V2B3222R W43002 Factory Installed (1)#14#4 AWG CU V2E2203 W49827 W55365 TFAK32 (1)#101/0 CU/AL V2E3203 W49827 W55365 TFAK32 (1)#101/0 CU/AL V2F2204 W49819 W55366 TFAK42 (1)#6250Kcmil CU/AL V2F3204 W49819 W55366 TFAK42 (1)#6250Kcmil CU/AL V2F3204MS W49819 W55366 TFAK42 (1)#6250Kcmil CU/AL W43000 and W43002 Hardware to extend unit depth from 4.56 to 6.75 inches. T Fuse Kit includes hardware for 1 pole only. ¹ ₄20 Screws A Box Extensions (Spacers) ⁵ ₁₆18 Screws Bus Bar Connectors 5

58 Double and Single Units 12 Panel Dimensions 240V AC Compact 2.5 Sliding Contact Unit 2 and 3Pole Double Branch Units Ampere 2 and 3Pole Single Branch Units 30 30, and Ampere 23 Pole Single Branch Units 100 Ampere Catalog Numbers V2E2203LR V2E3203 Catalog Numbers V2A2211 V2A3211 Catalog Numbers V2B2211 V2B2212 V2B3211 V2B3212 V2B3211R V2B3212R V2B2222 V2B3222 V2B3222R Indicates bus connection configuration with suffix LR LM MR. 6

59 2Pole Single Branch Units 200 Ampere 3Pole Single Branch Units 200 Ampere Catalog Number V2E2204 Catalog Number V2F3204 Indicates bus connection configuration with suffix LR LM MR. 7

60 17 VacuBreak Panel 240V AC 8 240V AC 17 Panel Dimensions Horsepower Rating Catalog No. of (inches) 240V AC Number Amperes Poles Branches H W D Std. Max. DC 250V V7A V7A V7B V7B V7B3211R V7B V7B V7B3212R V7B V7B V7B3222R V7E V7E V7E V7E V7E3233R V7E V7F V7F3244R V7E V7F V7H V7H V7H V7H V7H Main Switch (Horizontal Mounted Back Connected) V7E3203MS V7E2204MS V7F3204MS V7H2205MS V7H3205MS V7H2206MS V7H3206MS Main Switch (Vertical Mounted Top Feed) VMS325T VMS326T Main Switch (Vertical Mounted Bottom Feed) VMS325B VMS326B Note: Order 2 Pole Units by adding appropriate connection designation LM, LR or MR (indicating Left, Middle and Right, Facing the panel). This unit is not a VacuBreak unit, but rather operates on a sliding contact design. Rated 10,000 AIC max. with Class H or R fuses.will not accept Class R fuse clip kits. Switch setup for Rfuse application only. Rated 600V AC but factory configured to accepted 250V Class H, K or R fuses. Convertible for Class J fuses. Available as Type LR connection designation only.

61 17 VacuBreak Accessories Accessories 240V AC VacuBreak 17 Panel VacuBreak Depth JFuse RFuse TFuse Number and Ranges Catalog Number Extension Kit Adaptor Kit Adaptor Kit Adaptor Kit Lugs Per Pole (Cu/Al) V7A2211 W48762 PC. #14 To #8 V7A3211 W48762 PC. #14 To #8 V7B2211 W48763 PC. #14 To #4 V7B3211 W48763 PC. #14 To #4 V7B3211R W48763 Factory Installed PC. #14 To #4 V7B2212 W48763 PC. #14 To #2 V7B3212 W48763 PC. #14 To #2 V7B3212R W48763 Factory Installed PC. #14 To #2 V7B2222 W48763 PC. #14 To #2 V7B3222 W48763 PC. #14 To #2 V7B3222R W48763 Factory Installed PC. #14 To #2 V7E3223 W48764 W A W A TFAK32100A PC. #10 To #1/0 W A W A PC. #14 To #1/0 V7E2223 W48764 W A W A TFAK32100A PC. #12 To #1/0 W A W A PC. #14 To #1/0 V7E2233 W48764 W49827 W55365 TFAK32 1 PC. #12 To #1/0 V7E3233 & W48764 W49827 W55365 V7E3233R TFAK32 1 PC. #10 To #1/0 V7F3644 & W48765 W55366 V7F3244R TFAK42 1 PC. #6 To 250kcmil V7E2204 W48764 W49819 W55366 TFAK42 PC. #6 To 250kcmil V7F3204 W48765 W49819 W55366 TFAK42 PC. #6 To 250kcmil V7H2205 W49814 W55367 TFAK52 PC. #1/0 To 500kcmil V7H3205 W49814 W55367 TFAK52 PC. #1/0 To 500kcmil V7H W49814 W55367 TFAK52 1 PC kcmil V7H2206 W49813 W55368 TFAK62 PC. #4/0 To 500kcmil V7H3206 W49813 W55368 TFAK62 2 PC. #4/0 To 500kcmil V7F3203MS W48764 W49827 W55365 TFAK32 Supplied w/cu pads V7F3204MS W48765 W49819 W55366 TFAK42 Supplied w/cu pads V7F3205MS W49814 W55367 TFAK52 Supplied w/cu pads V7F3206MS W49813 W55368 TFAK62 Supplied w/cu pads W48762, W48763, W48764, W48765 Hardware to extend unit depth from 6.75 to inches. Double branch units require 2 kits per unit. T fuse adapter kit includes hardware for 1 pole only. VacuBreak Connecting Strap Kits For Panelboards and Switchboards For 240V AC J Fuse application, use 600V AC unit and appropriate 240V AC J Fuse kit 30A Unit W49831; 60A Unit W Factory installed in V7E3233R. Factory installed in V7F3244R. Ampere 240V Unit 600V Unit S4/F1, FPP (10 Deep) S5/F2, FPP (12.75 Deep) SB1, SB2, SB3, FC20, FC1 Rating Height (Inches) Height (Inches) Strap Kit Strap Kit VB5,VB6 Strap Kit F602 F602D F657 F657D VB F657 F657D VB F657 F657D VB F657 F657D VB F657 F657D VB F657 F657D VB , , 10 F671 F671D VB F672 F672D VB F6150 F6150D VB F6150 F6150D VB6150 9

62 Double and Single Units 17 Panel Dimensions 240V AC Compact 2.5 Sliding Contact Units 2 and 3Pole Double Branch Units Ampere 2.50 High x Wide x and 3Pole Double Branch Units 30 30, and Ampere 5.00 High x Wide x 6.25 Deep Catalog Numbers V7A2211 V7A3211 Indicates bus connection configuration with suffix LR LM MR. 10 Catalog Numbers V7B2211 V7B2212 V7B2222 V7B3211(R) V7B3212(R) V7B3222(R)

63 2 and 3Pole Double Branch Units Ampere Ampere 2Pole Single Branch Units 200 Ampere Catalog Numbers V7E2233 V7E3233(R) V7E2223 V7E3223 Indicates bus connection configuration with suffix LR LM MR. Catalog Number V7E

64 Double and Single Units 17 Panel Dimensions 240V AC 3Pole Single Branch Units 200 Ampere 2 and 3Pole Single Branch Units 400 Ampere Catalog Numbers V7H2205 V7H3205 V7H Catalog Number V7F3204 Indicates bus connection configuration with suffix LR LM MR. 12

65 2 and3 Pole Single Branch Unit 600 Ampere 3Pole Main Switch Units 400 and 600 Ampere Catalog Numbers V7H2206 V7H3206 Indicates bus connection configuration with suffix LR LM MR. Catalog Numbers VMS325T VMS326T VMS325B VMS326B 13

66 17 VacuBreak Panel 600V AC 600V AC 17 Panel Dimensions Horsepower Rating Catalog No. of (inches) 480V AC 600V AC Number Amperes Poles Branches H W D Std. Max. Std. Max. V7E V7E V7E3611R V7E V7E V7E V7E V7E3622R V7E V7E V7E V7E3633R V7E V7E V7F V7F V7F V7F3604R V7H V7H V7H V7H _ V7H Main Switch (Horizontal Mounted Back Connected) V7E3603MS V7F3604MS V7H3605MS V7H3606MS Main Switch (Vertical Mounted Top Feed) VMS365T VMS366T Main Switch (Vertical Mounted Bottom Feed) VMS365B VMS366B Order 2 pole branch units by adding appropriate connection designation LR, LM or MR (indicating Left, Middle and Right, facing the panel). Switch setup for Rfuse applications only. Factory supplied in 250V AC class H position. For 600V AC applications, use class J position. 14

67 17 VacuBreak Accessories Accessories 600V AC VacuBreak 17 Panel VacuBreak Depth JFuse RFuse TFuse Number and Ranges Catalog Number Extension Kit Adaptor Kit Adaptor Kit Adaptor Kit Lugs Per Pole (Cu/Al) V7E3611 W48764 W49832 W56623 PC. #14 To #4 V7E3612 W48764 W A W A 1 PC. #14 To #2 W A W A V7E3622 W48764 W49830 W56629 PC. #14 To #2 V7E3623 W48764 W A W A 1 PC. #14 To #1/0 W A W A TFAK35 V7E3633 W48764 W49828 W55365 TFAK35 PC. #14 To #1/0 V7E3603 W48764 W49828 W55365 TFAK35 PC. #14 To #1/0 V7F3644 W48765 W55366 TFAK45 PC. #6 To 250kcmil V7F3604 W48765 W49818 W55366 TFAK45 PC. #6 To 250kcmil V7H3605 W49816 W55367 TFAK55 PC. #1/0 To 500kcmil V7H W49816 W55367 TFAK55 1 PC. 250 To 750kcmil V7H3606 W49815 W55368 TFAK65 2 PC. #4/0 To 500kcmil V7E3603MS W48764 W49828 W55365 TFAK35 Supplied w/cu pads V7F3604MS W48765 W49818 W55366 TFAK45 Supplied w/cu pads V7H3605MS W49816 W55367 TFAK55 Supplied w/cu pads V7H3606MS W49815 W55368 TFAK65 Supplied w/cu pads W48764 and W48765 Hardware to extend unit depth from 6.75 to inches. Double branch units require 2 kits per unit. T Fuse Kit includes hardware for 1 pole only. Also applies to catalog numberv7e3611r. Also applied to catalog numberv7e3622r. VacuBreak Connecting Strap Kits For Panelboards and Switchboards Also applies to catalog numberv7e3633r. No kit required. Fuse clips can be repositioned for Class J fuse applications. Also applies to catalog numberv7e3604r. Ampere 240V Unit 600V Unit S4/F1, FPP (10 Deep) S5/F2, FPP (12.75 Deep) SB1, SB2, SB3, FC20, FC1 Rating Height (Inches) Height (Inches) Strap Kit Strap Kit VB5,VB6 Strap Kit F602 F602D F657 F657D VB F657 F657D VB F657 F657D VB F657 F657D VB F657 F657D VB F657 F657D VB , , 10 F671 F671D VB F672 F672D F6150D VB F6150D VB

68 Double and Single Units 17 Panel Dimensions 600V AC 3Pole Double Branch Units 30 30, and Ampere 3Pole Double Branch Units Ampere 3Pole Single Branch Units 100 Ampere Catalog Numbers V7E2611 V7E3611(R) V7E2612LR V7E2622 V7E3612 V7E3622(R) Catalog Numbers V7E2633 V7E3623 V7E3633(R) Catalog Number V7E2603 V7E3603 Indicates bus connection configuration with suffix LR LM MR. Use 3pole unit for 2pole application. 16

69 3Pole Double Branch Units Ampere 3Pole Single Branch Units 200 Ampere 3Pole Single Branch Units Ampere Catalog Number V7F3644(R) Catalog Numbers V7H2605 V7H3605 V7H V7H2606 V7H3606 Catalog Number V7F2604LR V7F3604(R) Indicates bus connection configuration with suffix LR LM MR. 17

70 17 Main Switch 600V AC A Vertical Mounted Top and Bottom Feed Catalog Numbers VMS365T VMS365B VMS366T VMS366B 18

71 17 Panelboard/Switchboard Sentron TM HCP Switch and Accessories 3Pole, Horizontal Mount Maximum Maximum Horsepower Rating Catalog Ampere Voltage Fuse Dimensions (inches) 240V AC 480V 600V 250V Number Rating Rating Class H W D Std. Max. Std. Max. Std. Max. DC HCP367HJ J HCP367HJ J HCP327HT T HCP367H L HCP328HT T HCP368H L Pole,Vertical Mount HCP367VJ J HCP367VJ J HCP327VT T HCP367V L HCP328VT T HCP368V L Accessories Terminal Connectors (one lug per kit) Ampere Catalog Connector Rating Number Wire Range A TA2K500 (2) #1 AWG500 kcmil (Cu or Al) A TC2K500 (2) #1 AWG500 kcmil (Cu only) A TA3K500 (3) #1 AWG500 kcmil (Cu or Al) A TC3K500 (3) #1 AWG350 kcmil (Cu only) A TA4H500 (4) #2 AWG500 kcmil (Cu or Al) A TA3H750 (3) kcmil (Cu or Al) Auxiliary Switch Kit Contact Maximum Ampere Voltage Switch Catalog Rating AC DC Mounting Contacts Number 15A Left Pole 1NO/1NC A01HCPL4 15A Right Pole 1NO/1NC A01HCPR4 10A Left Pole 2NO/2NC A01HCPL2 Shunt Trip Kit TFuse Adapter Kits (one per pole) Catalog Number Description TFAK72 800A, 300V AC TFAK75 800A, 600V AC TFAK A, 300V AC Compression Lug Adapter Kit The use of this kit provides for the mounting of up to four lugs per phase. Each kit accepts lugs with (2) 3/8 diameter mounting holes on 1 centers. One kit per pole line or load is required. Lugs are not provided. Ampere Catalog Rating Number A HCPCLP Control Voltage AC DC Catalog Number 120 HCPST HCPST HCPST277 Switchboard 480 HCPST480 Ampere 48 HCPST48 Rating 125 HCPST125 For horizontal mounting only in either 38 wide min switchboards or S5/F2 power panelboards. Connection Strap Kit Catalog Number A F6162D 19

72 RESET Horizontal Mount Drawing WIRE CONNECTOR (OPTIONAL) ENCLOSURE MOUNTING 5X.228 THROUGH X X WIRE CONNECTOR (OPTIONAL) X 3/816 TAPPED 2X.34 THRU HOLES THRU DETAIL A LUG, REF 3 PLACES LOAD END (HARDWARE NOT SHOWN FOR CLARITY) X.34 THRU C L OF THRU HOLES EDGE OF DIMPLE SEE DETAIL B SEE DETAIL A FILLER PLATE LUG, REF DETAIL B 3 PLACES LINE END MAX. AVAIL. TERMINAL SURFACE 2X 3/816 TAPPED HOLES THRU MOUNTING HOLES FOR 1/4" SCREWS 4 PLACES LINE SIDE ON VOIDABLE INTERLOCK LOAD SIDE MOUNTING HOLES FOR 1/4" SCREWS FARSIDE, 4 PLS DOOR OPEN OFF 5.97 DOOR LOCK BRKT SW. ENCLOSURE GROUND LUG Group Mounting Assembly (Horizontal Mount Only) Z RAIL DETAIL A DETAIL A Note: Right exit shown, rotate 180 for left exit Note: Items 26 & 27 are used to ground the switch enclosure (Route bonding wire along flange) LOAD WIRE CONNECTOR (OPTIONAL) Item Connection Parts Supplied Strap in Kit Qty. Cat. No. F6162D 12 A/CØ Strap (Short) 1ea. 34 BØ Strap 1ea. 56 A/C Ø Strap (Long) 1ea. 78 Switch Mounting Bracket 1ea. 9 Insulation /8 Insulator 11 3/816 X 3/4 HHMS 12 3/8 Lock Washer 13 3/8 Flat Washer 14 3/816 X 3/4 RHSNB 3 15 Strap Bus Hardware Kit /428 X 3/8 SHWHSW /1618 Insert 18 5/1618 X 1 SRHMS 19 5/16 Flat Washer 20 5/16 Lock Washer /420 X 1 SRHMS 2 26 Ground Bracket X 1/4 SHWHSW 2

73 21 VacuBreak Panel 240 and 600V AC and Accessories Top Feed 240 and 600V AC 21 Panel Dimensions Horsepower Rating Catalog No. of (inches) 240V AC 480V AC 600V AC Number Amperes Poles H L D Std. Max. Std. Max. Std. Max. VF357TL/BL VB357TL/BL VF358TL/BL VB358TL/BL Interrupting Ratings TFuse RMS Adaptor Kit Switch Rating Fuse Type Voltage Symm.Amp 1 Kit Per Pole 800A Class L 600V or Less 200,000 None 800A Class 240V AC 200,000 TFAK72 800A Class T 600V AC 200,000 TFAK A Class L 600V or Less 100,000 None 1200A Class T 240V AC 200,000 None Note: 21 wide 800 and 1200A VacuBreak Fusible Panelboard switches are supplied with spade type bolted terminal pads. Lugs are not factory installed. Bottom Feed 21

74 21 Panelboard Units V AC Class L Fuse 2Pole Switchboard Unit Top Feed Class L Fusing 800 and 1200 Ampere Catalog Number Volt Amp VF357TL VB357TL VF358TL VB358TL Pole Switchboard Unit Bottom Feed Class L Fusing 800 and 1200 Ampere Catalog Number Volt Amp VF357BL VB357BL VF358BL VB358BL