Fast Charger SL01/02

Size: px
Start display at page:

Download "Fast Charger SL01/02"

Transcription

1 Fast Charger SL01/02 User Manual This manual contains important information for commissioning and handling. Please read them first before use of the SL01 or SL02 and keep these instruction, so you can look up any time. English SL V1.27

2 Copyright All company and product names included are trademarks of their respective owners. All rights reserved. Segway is a trademark of Segway Inc. Segway PT is the standard term for the Segway Personal Transporter with patented balance technology described in this manual. The principles in this guide apply to both (although not identical) Segway PT models (i2 and x 2). All other trademarks are the property of their respective owners. The Segway Personal transporter, short Segway PT, for simplicity will be referred to as the Segway in this document. The SEGWAY brand is protected by law and is used here only for product description of your quick charger. For simplicity the fast charger in this guide is called the SL. Disclaimer This manual has been created with the utmost care. Should you find any faults or miss some content, please contact us. On the last page of the instructions you will find our corresponding address. The Pukshofer Company assumes no liability for technical and typographical errors and reserves the right to make modifications to the product and/or the manual at any time without further notice. Pukshofer is not responsible or liable for direct or indirect consequential damages arising in connection with the facilities and the use of this product. We assume no guarantee for the content of this document. S 2

3 Dear customer, Thank you for purchasing this product. The SL01 or the SL02 is designed to charge your Segway battery faster. These two chargers are an independent development and have no relation to Segway Inc. The two chargers were developed with the utmost care and designed in a way, that they can charge the Segway s battery faster while still not overstrain the latter. One SL can charge only one Segway battery. For charging a Segway with two batteries you will need two SLs. You can use two SL01 or combine also one SL01 and one SL02. The Chargers can charge the battery with 0.6 amps, just as the original chargers, or faster with 2 amps. To toggle between the modes (0,6A/2A) push the button on the SL or only for the SL02 set the modes by Software on the PC. The operating modes of the SL01/02 are indicated by two LEDs. The built-in "charging connector" allows for connecting different charging cables. The SL01 is designed as a simple model for daily use and can charge with 0.6 or 2 amps. The SL02 is the luxury model with many additional features to the charging modes. The SL02 also contains a "graphical user interface" (GUI). With this interface you can control the SL02 and read, save and process its data on the PC. Function Overview: SL01: * charging at 0.6 amps * charging at 2 amps SL02: * charging at 0.6 amps * charging at 2 amps * reanimate batteries * read cell status * GUI * graphical representation of all measured values S 3

4 Content Copyright... 2 Introduction.. 3 functions... 3 Content.. 4 Safety instructions & warranty.. 5 Use of the SL01 / Setting the charging modes... 6 Checking the charging mode Charging a Segway battery Security check before charge with 2A Reading the charging mode Use of the SL02 s GUI... 8 GUI setup Installing the driver for the data connection Installing the GUI software GUI-Window: Control GUI-Window: Scan cells GUI-Window: Reanimation Error situations Examples Technical Data Icons used in this manual Note: This symbol shows you important information. Recycling: The recycling symbol reminds you to dispose of the SL after his lifetime not in the domestic waste. S 4

5 Safety instructions & warranty Dear customer, the following safety and hazard information is not only for the protection of your health, but also for the protection of the device. Please read the following points carefully: This manual shows you the proper operation of your SL01/02. Keep these instructions accessible at any time! That device is for indoor use only. Please operate the device exclusively as described in this manual. Whatever other usage may cause serious damage to the device. It is not permitted to make any modifications to this product. Never try to open the product. Internal inspections, modifications and repairs must be performed only by authorized personnel. For repair please consult the Pukshofer Company. Handle the product carefully. It can be damaged by shocks or falling down, even from low heights. To avoid the risk of electrical shock, never touch inside parts. Contact the customer service immediately, if something at the device seems broken. Keep the product from moisture and heat. Never cover the ventilation opening. The SL is cooled by a fan that turns on if the temperature increases. The fan speed is regulated. There can be chirping noises when the fan turns very slowly. That is normal behavior. Never immerse the product in water or other liquids. The product s housing is not waterproof. Should water or other foreign bodies penetrate into the Interior of the housing, pull out the power cord immediately from its socket. Don t use substances containing alcohol, benzene, thinners, or other flammable substances for cleaning or maintenance of the device => Risk of fire. Keep this device out of the reach of children and infants. Unattended children could injure themselves. Important disposal instructions This appliance does not belong to the waste. For the professional disposal please contact the public collecting points or send it back to the Pukshofer company. You can find the address on the last page of these instruction manual or under S 5

6 Using the SL01/02 Modebutton Connector 230V - Socket charge-led(blue) Error-LED(red) Plug the power cable into the 230 V socket of the SLs. After connection both LEDs will flash twice (function test). The red Error LED lights up when no battery is connected (this is normal). As soon as you connect a battery the charging starts. The red error LED goes off and the blue charging LED will light. Setting the charging modes: Set the charge mode with the "mode" button. To do this press the "mode" button and hold it down. The blue charging LED starts flashing. The "charging LED" now flashes slowly for 3 seconds, then fast and slow flashing is alternating about every 3 seconds. Depending on when you release the button the appropriate mode is set: Release the button while slow flashing: the charging mode 0,6A is active. Release the button while fast flashing: the charging mode 2A is active. The selected mode is stored in the SL and retained even after switching off. Check the charging mode: You can easily check the mode by pressing the mode" button shortly. The charging LED flashes slowly if the charging mode 0,6A is used. If it flashes rapidly, the charging mode 2A is active. S 6

7 Charging a Segway battery: After the SL is connected to the 230 V power socket and the correct mode is set, you can connect the charging cable to the SL s charging connector and the Segway s battery. After 4 seconds the SL will detect the connected battery and switch from the red Error LED" blue charging LED. The charging process will then start with the selected charging mode". to the If you have plenty of time for the charging process or you have an already older battery, then you should use the 0,6A mode. If you want to charge fast, use the 2A mode. The SL tries to charge the battery as gently as possible in the 2A-Mode. Therefore, the SL charges the battery only up to a certain limit with 2A. Then it reduces the current and finishes the rest with 0,6A. When the Segway battery is fully charged the SL switches to trickle charging. Just as you know it from the Segway. the charging LED lights up only shortly. Security check before charge with 2A: If the SL is set to the Charging mode 2A and you reconnect a battery, the SL will remain in charging mode 0,6A for the first 10 seconds to check the possibility for charging the battery with 2A. In case it s possible it switches to the mode 2A. Now, also the flash frequency of the "charge LED" changes. If the SL does not switch to the mode 2A for any reason (e.g. battery almost fully charged), it will remain charging with 0,6A and the "charging LED" lights will stay solid blue. The 10 seconds check is not active when you toggle by GUI from 0,6A to 2A! Read the charging mode: During the charging process you can see the charging mode set by the status of the blue "charging LED. If the LED "charging" is not flashing the SL charges with 0,6A. If it is flashing slowly it is charging with 2A LED state meaning mode illuminates solid blue Charging with 0,6 Ampere (original) 0,6 A - as above, with short flashes Charging with 2 Ampere (fast) 2 A S 7

8 Using the SL02 s GUI The manual operation of both the SL01 and the SL02 are equal. You can operate both with the button. Also, the "charging modes" are equal. The SL02 has a data interface and an advanced firmware. With the SL02 an additional "user interface" (GUI) is supplied. The GUI runs on Windows systems: XP; Vista, Win7,... You can connect it to the PC with the supplied USB adapter. You can control, evaluate and analyze data. The data connection is electrically isolated, so one can operate several SLs on one PC at the same time. The following additional functions are only available with the SL02: Control o view the status of the SL02 o switch between modes (0,6A or 2A) o start and stop the charging o display voltage o graph the voltage in a chart window, copy, print, and save o read the firmware version Scan cells o read all 23 cell values If you can see broken cells, maybe the battery no longer works o read the load state of the battery (also compare the InfoKey display on your Segway). o read the battery temperature o check battery status (showing that the battery is working properly) Battery reanimation o reanimate deep-discharged Segway batteries The Segway recognizes discharged batteries as defective. o Reanimation process can revive these batteries o graphical representation of the voltage o save and print image o display of elapsed time in minutes o various protective functions S 8

9 GUI setup Installing the driver for data connection: A USB converter from Delock ships with the SL02. This converter is equipped with a plug for connection to the SL02. The driver software must first be installed from the enclosed CD. Connect the USB converter to the PC, the PC should recognize this. Now you need to determine which COM port the PC assigns to the USB converter. (you must set the COM-port in the GUI, so that the GUI can establish a connection to the SL02.) Always use the same USB port on your computer! You can open the Windows Device Manager and search the COM ports. A preferred method is the program HTerm.exe" (You will find this program on the USB drive in the folder Tools") Start the program and click Port". You will then get a list of all COM ports available on your PC. The newest port is used by the USB converter. Installing the GUI: On the enclosed USB flash drive you will find the folder SL_GUI_V2.01" You can copy this folder to your hard drive or copy a link to the stick. If you want to start the GUI you need to run the program SL_GUI_V2.01.exe". Create a shortcut on the desktop, so you can easily start the GUI from the desktop. Before you can use the GUI with the SL02 the USB converter must be connected to the PC. The PC must have recognized it first also. Then open the window to set the COM interface. Now you see the hardware window of the GUI.. S 9

10 Select "all" COM connections. With the Ändern = "Change" button you can then set the COM port of the USB converter. If both Daten Abfrage = "data query" LEDs will illuminate in sequence, sending and receiving data to the SL02 will work. S 10

11 GUI-Window: Control With the main window Steuerung = "Control", you can completely control your SL02 by a Windows- PC. The window is divided into several areas: In the Status section you see the state of the SL02. In addition, even the LEDs from the SL02 are shown (blue, red). In the area Spannung = "Voltage" you will see the charging voltage of the SL02. The charging current is limited to 0,6A or 2A and according to the battery status different voltages will drive battery. If the battery is completely empty you will see a voltage of 65V, while the battery is fully loaded at 81V. The voltage will be shown only when the SL02 is active and charging is on. With Steuerung = "Control" you can control the SL02, start and stop charging and select the modes. To do this, use the mouse and click on the red buttons. Laden EIN = charging ON ; Laden AUS = charging OFF The field Daten Abfrage = "data query" is activated automatically after startup. The data will be automatically read from the SL02. The top LED symbolizes data-sending and the bottom LED datareceiving. If the data connection is established properly, there will be sent some data to the SL02 first and then the SL02 will receive some data. If the LEDs are not in this rhythm, something is wrong with the data connection. With the large chart window (Center) you can show the voltage on a timeline. Press the large REC button on the right side to begin. The voltage is now displayed graphically. The default setting of the window is a sampling time of 500ms and a switched on auto-zoom function. If you press the little black arrow in the bottom left of the window, a setting window opens up. Here you can set various other parameters and you can save or print the Chart window. If you press the little black arrow once again the setting window will disappear. With the right button below you can read the firmware version of the SL02. S 11

12 GUI-Window: Scan cells With the main window Zellen-Scan = "Scan cells" you can read the internal data of the battery. To read the data press the big red button START It takes a few seconds until all data can be shown. 92 cells are built into every Segway battery. These a grouped together into packages of 4 cells and each battery consists of 23 of these packages in an electrical series connection. In the field Zellen = "Cells" you will see the voltage of each of the cell packages (Z1 to Z23). The bars indicate the voltage in percent. Voltages below 100% are represented in green colour whereas voltages above 100% are represented in red colour. Generally all the cells should be located within the green area. With this window one can check, if the battery is evenly loaded or if maybe a cell is defective. If a cell is damaged the red indicator below the respective graph additionally lights up. You can read the charge status of the whole battery in the section Striche am Key = "dashes in the key". This corresponds with the graph on the INfoKey. Akku Temperatur = "Battery temperature" displays the temperature in the battery housing. Akku status = "Battery status" displays the battery status of the Segway s battery. Green: the Segway will accept the battery. The battery will not work with the Segway! S 12

13 GUI-Window: Reanimation In the main window Akku reanimation you can reanimate deeply discharged batteries. If a Segway battery is discharged under 50V, the Segway no longer recognizes the battery and it can't anymore be used with a Segway. By the reanimation process the battery will be charged topping 50V so that the Segway can detect the accumulator and recognize it again. Attention The reanimation is done at your own risk! No liability is assumed! Never leave the battery unattended! You need the red cable for the reanimation process. Connect the SL02 to the Segway s battery. Start the graphical representation of the voltage with the REC button,on the right side and press the green button START Now the blue and red LEDs flash alternately. In the chart window you can see the voltage rise up slowly. The revive is performed at the lowest performance at approx. 0,4A. There are four built-in protection functions: The cable must be the correct one (red). (otherwise the error LED flashes) resuscitation time max. 60 minutes resuscitation voltage max. 60V Short circuit protection (longer than 15 seconds = power off) If one of these protection functions is active (except cable) each event slowly fills up the "boundary error" bar. When it is full the SL02 stops the resuscitation process. S 13

14 When the battery has reached 60V you can unplug it and try to charge it with the SL or with the Segway. If nothing is broken on the battery (such as single cells) or if cell voltage is not too low still, it should be possible to charge the battery after the reanimation process. If you recharge with the SL, don't forget to unplug the red cable and reconnect the default charging cable! Error situations: If the red error LED flashes at revive, you have connected the wrong cable. Only use the red wire to revive! If the voltage exceeds 60V, the SL switches off after 15 seconds. If there is a short circuit in the battery, the SL turns off also after 15 seconds. S 14

15 A Segway battery has a capacity of 5,2Ah When the Segway battery is completely empty (voltages lower than 60V) the Segway needs 8:25 hours to fully charge the battery. The SL in the mode 2A only need 1:45 hours to charge the battery to approx. 70% (=3,72Ah). For the remaining 30% the SL then needs 2:35 hours because it finishes the charging process with reduced power. In sum the SL needs 4:20 hours for a total fast charge. For a complete charging the SL is twice as fast compared to the Segway s built-in charging mechanism. For charging up to 70% the SL is even 3 times faster as the Segway! Example with Segway X 2: approx. 20 km range For a ride of 1km the Segway needs to charge for 25 minutes. With the SL the same can be achieved in approx. 8 minutes (up to 70% charge) Example with Segway I2: approx. 35 km range For a ride of 1km the Segway needs to charge for 14 minutes. With the SL the same can be achieved in approx. 4 minutes (up to 70% charge) S 15

16 Technical Data Operating voltage input VAC 50Hz Output voltage max. 82V = Output current max. 2A Power consumption idle ca. 7 Watt Power consumption max. 200 Watt Fuse primary 6 Ampere Fuse secondary 4 Ampere Ventilation / cooling Speed controlled by temperature Weight 800 gramms Size 180(200)*90*50mm Data connection to the PC (SL02) Galvanically isolated Working temperature -10 bis +35 C EMC LVD EN55022:1998+A1:2000+A2:2003 EN55024:1998+A1:2001+A2:2003 (EN :1995+A1:1998+A2:2001) EN :2002 EN :1995+A1:2000+A2:2001 EN :1995+A1:2000 EN :2001 EN :2001) EN :2002+EN :2002 Copyright 2013 This manual is protected by copyright. All rights reserved. Reproduction in mechanical, electronic and any other form without the permission from the manufacturer is prohibited. Copyright by the PUKSHOFER Company Robert Pukshofer Triesterstr Graz (Austria) S 16

Functions and Displays

Functions and Displays Functions and Displays No. 4125 (12V/220V only - Euro-Connector) No. 4127 (12V/220V only - GB-Connector) No. 4129 (12V/110V only US/Japan-Connector) Dear Customer, thank you for purchasing this LRP product.

More information

Solar Hybrid Power Generating System CPS1200EOH12SC CPS2200EOH24SC CPS3000EOH24SC. User s Manual K01-C

Solar Hybrid Power Generating System CPS1200EOH12SC CPS2200EOH24SC CPS3000EOH24SC. User s Manual K01-C Solar Hybrid Power Generating System CPS1200EOH12SC CPS2200EOH24SC CPS3000EOH24SC User s Manual K01-C000304-02 2 TABLE OF CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS..4 2 INSTALLATION....5 2-1 Unpacking...5

More information

c-go 24V/6A 24V/8A 24V/12A

c-go 24V/6A 24V/8A 24V/12A c-go 24V/6A 24V/8A 24V/12A Battery charger GB Instruction manual 1 Index 1. Product description... 2 2. Safety advices... 3 3. Quick start guide... 4 4. Operation... 4 5. Problem solving... 6 6. Specifications...

More information

SI AT A22. English. Printed: Doc-Nr: PUB / / 000 / 01

SI AT A22. English. Printed: Doc-Nr: PUB / / 000 / 01 SI AT A22 English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and

More information

User Manual Digital Energy Uninterruptible Power Supply ML Series UPS VA GE Digital Energy Power Quality

User Manual Digital Energy Uninterruptible Power Supply ML Series UPS VA GE Digital Energy Power Quality GE Digital Energy Power Quality User Manual Digital Energy Uninterruptible Power Supply ML Series UPS 350-500-700-1000 VA GE imagination at work GB User Manual Digital Energy Uninterruptible Power Supply

More information

SI AT A22. English. Printed: Doc-Nr: PUB / / 000 / 03

SI AT A22. English. Printed: Doc-Nr: PUB / / 000 / 03 SI AT A22 English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and

More information

Lithium Power Supply

Lithium Power Supply Lithium Power Supply User Manual LPS 1200W-60Ah LPS 1500W-100Ah LPS 2500W-100Ah Compact lithium battery based power supply - for easy acces to 230V and 12V energy, everywhere! V1.1 Safety Instructions

More information

SBC V In-Car Charger Dual Input (Solar MPPT & DC)

SBC V In-Car Charger Dual Input (Solar MPPT & DC) SBC-5926 12V In-Car Charger Dual Input (Solar MPPT & DC) Operation manual Keep this manual in a safe place for quick reference at all times. This manual contains important safety and operation instructions

More information

User Manual. Digital Energy Uninterruptible Power Supply ML Series UPS VA. GE Digital Energy Power Quality. GE imagination at work

User Manual. Digital Energy Uninterruptible Power Supply ML Series UPS VA. GE Digital Energy Power Quality. GE imagination at work GE Digital Energy Power Quality User Manual Digital Energy Uninterruptible Power Supply ML Series UPS 350-500-700-1000 VA GE Consumer & Industrial SA General Electric Company CH 6595 Riazzino (Locarno)

More information

Match 19" GE Digital Energy. Uninterruptible Power Supply VA. Technology for the Digital World. Match 19" UPS.

Match 19 GE Digital Energy. Uninterruptible Power Supply VA. Technology for the Digital World. Match 19 UPS. Match 19" Uninterruptible Power Supply 700-1500 VA Manufactured by: General Electric Company Telephone +41 (0)91 / 850 51 51 CH 6595 Riazzino (Locarno) Fax +41 (0)91 / 850 51 44 Switzerland Website www.gedigitalenergy.com

More information

Intelligent Battery Charger

Intelligent Battery Charger Intelligent Battery Charger PA-NT2000 USER S MANUAL www.power-charger.net CONTENTS 1. Intended Use... 2 2. Delivery content... 3 3. Safety Instructions... 3 3.1Product Safety... 3 3.2 Battery safety...

More information

SC-Max 48V series. User Manual. Solar Charge Controller 30A

SC-Max 48V series. User Manual. Solar Charge Controller 30A SC-Max 48V series Solar Charge Controller 30A User Manual Contents 1 Description of function 2 Safety Instructions and Waiver of Liability 2.1 Safety 2.2 Liability Exclusion 3 Dimensions 4 Optional 4.1

More information

5 IN 1 JUMP START OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JS5IN1 PART NO: LS0810

5 IN 1 JUMP START OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JS5IN1 PART NO: LS0810 5 IN 1 JUMP START MODEL NO: JS5IN1 PART NO: 6240005 OPERATION & MAINTENANCE INSTRUCTIONS LS0810 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please

More information

User Manual IQ338. We thank you that you have decided to purchase our intelligent charger.

User Manual IQ338. We thank you that you have decided to purchase our intelligent charger. User Manual IQ338 Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. 9 120004 642783 Please follow the safety and care instructions

More information

12 amp RMS Battery Charger

12 amp RMS Battery Charger 12 amp RMS Battery Charger 83-5000-12 If faults cannot be remedied, contact the Helpline on 020 8391 6767 helpline@hilka.co.uk Manufactured under license by Hilka Pro Imports GUARANTEE This product is

More information

Design Features: User Manual. 1. PFC function. 2. LCD remote control. 3. Battery temperature sensor function.

Design Features: User Manual. 1. PFC function. 2. LCD remote control. 3. Battery temperature sensor function. User Manual Design Features: 1. PFC function. except BC-1215HT / BC-2407HT 2. LCD remote control. BC-1215HT / BC-2407HT 3. Battery temperature sensor function. 4. Tri-LED color indicator for different

More information

Super Brain 992 Palm Charger

Super Brain 992 Palm Charger Super Brain 992 Palm Charger INSTRUCTION MANUAL Features and Specifications DC charger with separate AC power supply included (DC input of 12V to 18V) Large backlit LCD Adjustable charge rate from 0.2

More information

On Line UPS. LUC 1000E / LUC 2000E / LUC 3000E User Manual

On Line UPS. LUC 1000E / LUC 2000E / LUC 3000E User Manual On Line UPS LUC 1000E / LUC 2000E / LUC 3000E User Manual Save This Manual Please read this manual carefully prior to storage, installation, wiring, operation and maintenance of the UPS. This manual contains

More information

c-go 12V/10A 12V/20A Power supply and battery charger Instruction manual

c-go 12V/10A 12V/20A Power supply and battery charger Instruction manual c-go 12V/10A 12V/20A Power supply and battery charger GB Instruction manual 1 Index 1. Product description... 2 2. Safety advices... 3 3. Mounting and installation... 4 4. Operation... 5 5. Problem solving...

More information

Prop-Tech Vacuum Analyzer

Prop-Tech Vacuum Analyzer Electronic Carburettor / Injector Balancing Tool 1. WARNING THIS PRODUCT IS A PROFESSIONAL TOOL WHICH SHOULD ONLY BE OPERATED BY A COMPETENT TRAINED TECHNICIAN AND ONLY FOR THE PURPOSE WHICH IT WAS DESIGNED

More information

Operating Instructions & Parts Manual. Portable Power Supply & Jump Starter ! WARNING

Operating Instructions & Parts Manual. Portable Power Supply & Jump Starter ! WARNING Operating Instructions & Parts Manual Portable Power Supply & Jump Starter Model 80600, 80600R Capacity 6,000 mah US Patent No. 6,531,789 B1 US Patent No. 7,498,798 B2! This is the safety alert symbol.

More information

Intelligent NiMH/NiCd/Li-ion Charger TN456

Intelligent NiMH/NiCd/Li-ion Charger TN456 Intelligent NiMH/NiCd/Li-ion Charger TN456 USER S MANUAL www.tenergy.com CONTENTS 1. Intended Use...3 2. Package Contents...4 3. Safety Instructions...4 3.1 Product Safety...4 3.2 Battery safety...4 4.

More information

PCBA Instruction Manual

PCBA Instruction Manual PCBA 5010-4 Instruction Manual Disclaimer The PCBA 5010-4 has been designed and manufactured with careful consideration to the issues of safety from electrical shock, thermal hazards and RFI compliance

More information

User Manual. User Manual IQ338XL

User Manual. User Manual IQ338XL User Manual IQ338XL Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. Please follow the safety and care instructions in

More information

Pulsar EXtreme CLA 1500C

Pulsar EXtreme CLA 1500C www.mgeups.com MGE UPS SYSTEMS Pulsar EXtreme CLA 500C Installation and user manual 503998EN/AA - Page Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.

More information

CBC-9130 / V 30A / 24V 15A Pro. Charger. Operation manual

CBC-9130 / V 30A / 24V 15A Pro. Charger. Operation manual CBC-9130 / 9215 12V 30A / 24V 15A Pro. Charger Operation manual Keep this manual in a safe place for quick reference at all times. This manual contains important safety and operation instructions for correct

More information

PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011

PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011 g ordon PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER 4603 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Copyright 200 by Harbor Freight Tools. All rights reserved. No portion

More information

EPAS Desktop Pro Software User Manual

EPAS Desktop Pro Software User Manual Software User Manual Issue 1.10 Contents 1 Introduction 4 1.1 What is EPAS Desktop Pro? 4 1.2 About This Manual 4 1.3 Typographical Conventions 5 1.4 Getting Technical Support 5 2 Getting Started 6 2.1

More information

USER S MANUAL SOLAR POWER INVERTER KW-6KW

USER S MANUAL SOLAR POWER INVERTER KW-6KW USER S MANUAL ------SOLAR POWER INVERTER------ 1KW-6KW Appliances--------------------------------------------- Content Content Content... 1 1 Figures of unit... 2 2 Specification... 3 3 Front panel...

More information

Power Inverter. User s Manual. Diamond Series CPD1200EILCD

Power Inverter. User s Manual. Diamond Series CPD1200EILCD Power Inverter Diamond Series CPD1200EILCD User s Manual 2 TABLE OF CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS..4 2 INSTALLATION....5 2-1 Unpacking...5 2-2 Product Overview & Outlook..5 2-3 Power Requirements

More information

SMART FLIGHT BATTERY OPERATING MANUAL

SMART FLIGHT BATTERY OPERATING MANUAL SMART FLIGHT BATTERY OPERATING MANUAL English Disclaimer Before using smart flight battery, please read the operating manual carefully and familiarize yourself with the operations, warnings and applications.

More information

BMS SV 24S for 2S-24S LiPo, LiFe & LiTO&others Low power consumption High accuracy 2.8 TFT LCD display Programmable

BMS SV 24S for 2S-24S LiPo, LiFe & LiTO&others Low power consumption High accuracy 2.8 TFT LCD display Programmable BMS SV 24S for 2S-24S LiPo, LiFe & LiTO&others Low power consumption High accuracy 2.8 TFT LCD display Programmable Thanks for your purchasing the for your vehicle. Read the ENTIRE instruction manual to

More information

OPERATING MANUAL Digital Diesel Control Remote control panel for WhisperPower generator sets

OPERATING MANUAL Digital Diesel Control Remote control panel for WhisperPower generator sets Art. nr. 40200261 OPERATING MANUAL Digital Diesel Control Remote control panel for WhisperPower generator sets WHISPERPOWER BV Kelvinlaan 82 9207 JB Drachten Netherlands Tel.: +31-512-571550 Fax.: +31-512-571599

More information

RED CHARGER FOR RED BRICK V-LOCK LITHIUM ION BATTERIES OPERATING MANUAL

RED CHARGER FOR RED BRICK V-LOCK LITHIUM ION BATTERIES OPERATING MANUAL RED CHARGER FOR RED BRICK V-LOCK LITHIUM ION BATTERIES OPERATING MANUAL Please read these instructions concerning your safety The RED CHARGER lithium-ion battery charger has been designed to manage relatively

More information

TM Intelligent battery charger for Car- System

TM Intelligent battery charger for Car- System TM-42200 Intelligent battery charger for Car- System User's manual 2011 BioDigit Ltd. All rights reserved. It is forbidden to reproduce and/or publish the contents of the present document in any form including

More information

UPS USER MANUAL F-11 LINE INTERACTIVE UPS GENERAL PURPOSE UPS 650VA/1200VA/2200VA

UPS USER MANUAL F-11 LINE INTERACTIVE UPS GENERAL PURPOSE UPS 650VA/1200VA/2200VA UPS USER MANUAL F-11 LINE INTERACTIVE UPS GENERAL PURPOSE UPS 650VA/1200VA/2200VA IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions for models Aurora Vista

More information

MANUAL BAT/48342 IMPORTANT NOTE : BEFORE FIRST USE CHARGE THE JUMP STARTER WITH THE SUPPLIED CHARGER FOR AT LEAST 12 HOURS.

MANUAL BAT/48342 IMPORTANT NOTE : BEFORE FIRST USE CHARGE THE JUMP STARTER WITH THE SUPPLIED CHARGER FOR AT LEAST 12 HOURS. CONGRATULATIONS: You have purchased a carefully Swiss engineered, top quality product. Your engine starter is designed to give you the quality and convenience you expect in a jump starter. We have taken

More information

EASY CHARGE Waterproof portable Battery Charger

EASY CHARGE Waterproof portable Battery Charger EASY CHARGE Waterproof portable Battery Charger 1.1 AND 4.3 AMP MODELS EN NL, DE, FR, ES, IT USER S MANUAL WWW.MASTERVOLT.COM/EASYCHARGE-PORTABLE 10000009117/04 2 EN / EasyCharge 1.1 and 4.3 Amp - User

More information

CX Series User s Manual

CX Series User s Manual CX Series User s Manual Advanced Converter / Charger Legal Provisions Copyrights 2016 COTEK Electronic IND. CO. All Rights Reserved. Any part of this document may not be reproduced in any form for any

More information

SK-10. Features. Solar Charge Controller User Manual. Important Safety Information

SK-10. Features. Solar Charge Controller User Manual. Important Safety Information SK-10 Solar Charge Controller User Manual 12V/24V 10Amp Dear Users: Thank you for selecting our product. Please read this manual carefully before you use this product. This product is of cutting edge design,

More information

EV Power - A-Series 8 Cell, 16 Cell and 24Cell Chargers Installation & Usage Instructions.

EV Power - A-Series 8 Cell, 16 Cell and 24Cell Chargers Installation & Usage Instructions. A-CHARGERS MANUAL 1.1 EV Power - A-Series 8 Cell, 16 Cell and 24Cell Chargers Installation & Usage Instructions. A-Series Charger Features - Simple to install and use, microprocessor control. - LiFePO4

More information

Instruction of connection and programming of the VECTOR controller

Instruction of connection and programming of the VECTOR controller Instruction of connection and programming of the VECTOR controller 1. Connection of wiring 1.1.VECTOR Connection diagram Fig. 1 VECTOR Diagram of connection to the vehicle wiring. 1.2.Connection of wiring

More information

OPERATIONS MANUAL CR Thermoreactor

OPERATIONS MANUAL CR Thermoreactor OPERATIONS MANUAL CR 2200 Thermoreactor CR 2200 Note For the most recent version of the manual, please visit www.ysi.com. Contact Copyright YSI 1725 Brannum Lane Yellow Springs, OH 45387 USA Tel: +1 937-767-7241

More information

(R86049) WARNING: To reduce the risk of injury, the user must read and understand the operator s manual before using this product.

(R86049) WARNING: To reduce the risk of injury, the user must read and understand the operator s manual before using this product. OPERATOR S MANUAL 12 VOLT LITHIUM-ION BATTERY CHARGER 140446001 (R86049) Your charger has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety.

More information

Operating Instructions

Operating Instructions Operating Instructions LRC-Battery-Tester LRC-Battery-Tester with LED indicator ST000154 LRC-Battery-Tester with LED indicator and RS232 ST000155 LBT M E 01 04 2012 Page 2 Seite 3 TOC - Table of Contents

More information

Instruction of Solar Charge Controller. User s Manual

Instruction of Solar Charge Controller. User s Manual Instruction of Solar Charge Controller User s Manual 12V/24V 30A Dear Users: Thank you for selecting our product. Please read this manual carefully before you use this product. The controller is for off-grid

More information

BMS24. Thanks for your purchasing the BMS24 for your vehicle.

BMS24. Thanks for your purchasing the BMS24 for your vehicle. BMS24 for 2S-24S LiPo & LiFe Low power consumption High accuracy 2.8 TFT LCD display Programmable Thanks for your purchasing the BMS24 for your vehicle. Read the ENTIRE instruction manual to become familiar

More information

15Amp Intelligent Battery Charger Suitable for SLA, Gel, Maintenance Free, AGM, Deep Cycle batteries

15Amp Intelligent Battery Charger Suitable for SLA, Gel, Maintenance Free, AGM, Deep Cycle batteries 15Amp Intelligent Battery Charger Suitable for SLA, Gel, Maintenance Free, AGM, Deep Cycle batteries MB-3622 READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE! 1 CAUTION! When working

More information

Digital-Control and Programmable DC Power Supply Models: , , , & User Manual

Digital-Control and Programmable DC Power Supply Models: , , , & User Manual Digital-Control and Programmable DC Power Supply Models: 72-2535, 72-2540, 72-2545, 72-2550 & 72-10480 User Manual Page 19/05/16 V1.0 Safety Symbols This chapter contains important safety instructions

More information

Your new LM controller is a state-of-the art device which was developed in accordance with the latest

Your new LM controller is a state-of-the art device which was developed in accordance with the latest CAP LM-series Solar charge controller User Manual Thank you very much for buying this CAP product. Please read the instructions carefully and thoroughly before using the products. Your new LM controller

More information

Relay Retrofit Program Cutting Tool Safety Guide

Relay Retrofit Program Cutting Tool Safety Guide Relay Retrofit Program Cutting Tool Safety Guide Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted

More information

Piko Head Unit Piko 3 Piko X Piko U3

Piko Head Unit Piko 3 Piko X Piko U3 www.lupine.de Piko Head Unit Piko 3 Piko X Piko U3 OWNERS MANUAL Piko 1 Read this manual before using Mounting 2 General: The light and charger are ready for use when delivered. All you have to do is charge

More information

BMS16. Thanks for your purchasing the BMS16 for your vehicle.

BMS16. Thanks for your purchasing the BMS16 for your vehicle. BMS16 BMS for 2S-16S LiPo & LiFe Low power consumption High accuracy 2.8 TFT LCD display Programmable Thanks for your purchasing the BMS16 for your vehicle. Read the ENTIRE instruction manual to become

More information

User Manual Solar Charge Controller 3KW

User Manual Solar Charge Controller 3KW User Manual Solar Charge Controller 3KW Version: 1.3 CONTENTS 1 ABOUT THIS MANUAL... 1 1.1 Purpose... 1 1.2 Scope... 1 1.3 SAFETY INSTRUCTIONS... 1 2 INTRODUCTION... 2 2.1 Features... 2 2.2 Product Overview...

More information

Low Frequency Inverter. User Manual

Low Frequency Inverter. User Manual Pure Sine Wave 220-240V 50-60Hz Low Frequency Inverter User Manual For LK/LW series Power Star inverters only, models: LK2000, LK2000-24, LK3000, LK3000-24, LK3000-48, LK6000-24, LK6000-48 1. Safety precautions

More information

OPERATION AND MAINTENANCE

OPERATION AND MAINTENANCE Table of Contents GENERAL INFORMATION INTRODUCTION... 1 Operating Specifications... 1 FEATURES... 1 SAFETY PRECAUTIONS... 2 SET-UP... 2 OPERATION AND MAINTENANCE TESTING AN IGNITION MODULE OR IGNITION

More information

Phocos CML-V2. Solar charge controller. User Manual (English) Dear customer,

Phocos CML-V2. Solar charge controller. User Manual (English) Dear customer, Phocos CML-V2 Solar charge controller User Manual (English) Dear customer, Thank you very much for buying this Phocos product. Please read the instructions carefully and thoroughly before using the product.

More information

EV Power - Battery Control Unit Instructions. 8 Cell 24V

EV Power - Battery Control Unit Instructions. 8 Cell 24V EV Power - Battery Control Unit Instructions. 8 Cell 24V PAGE 1 OF 12 BCU-EVPPAK Features - Simple to install and use, microprocessor control. - Low power requirement, just 15mA when switched on with relay

More information

MODEL 908. Read Instructions Carefully! Fuel Gauge CURTIS INSTRUMENTS, INC.

MODEL 908. Read Instructions Carefully! Fuel Gauge CURTIS INSTRUMENTS, INC. MODEL 908 Fuel Gauge CURTIS INSTRUMENTS, INC. 200 Kisco Ave. Mount Kisco, New York 10549 914-666-2971 www.curtisinstruments.com 53051 Rev C 9/15 Read Instructions Carefully! SAFETY INSTRUCTIONS This instrument

More information

HPP1 MK5 Owner s Manual

HPP1 MK5 Owner s Manual J Wolmarans Page 1 2017/03/07 Page 1 of 10 TABLE OF CONTENTS Page 1 Introduction...2 2 Models...2 3 Safety warnings...3 4 Features...3 5 Contents...3 6 Installation...3 6.1 Mounting the unit:...3 6.2 Connecting

More information

100 Watt Power Inverter + USB INSTRUCTION MANUAL HT8710-AUOXY

100 Watt Power Inverter + USB INSTRUCTION MANUAL HT8710-AUOXY 100 Watt Power Inverter + USB INSTRUCTION MANUAL HT8710-AUOXY CONTENTS Warranty 2 Introduction 3 Environmental protection 3 Specifications 3 General safety warnings and instructions 4 Know your product

More information

Power your day-to-day when others are power-less. Humless Sentinel User s Guide.

Power your day-to-day when others are power-less. Humless Sentinel User s Guide. Power your day-to-day when others are power-less. Humless Sentinel User s Guide www. User s Guide Contents Safety Instructions page 6 Meet The Power page 7 Charging Your Unit page 12 Powering Your Devices

More information

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC Automatic Battery Charger Switching mode with Micro-controlled Input:220-260Vac / Output: 12Volt DC User s Manual and Important Safety Information Model: OC-SW121080 / OC-SW121160 / OC-SW121210 FEATURES

More information

Original Operating Manual

Original Operating Manual 2010-10-29 Original Operating Manual Control Panel Comfort for Pedelecs Series 4313 Save for future use! Marquardt GmbH Schlossstraße 16 78604 Rietheim-Weilheim E-mail: marquardt@marquardt.de Website:

More information

Issue 2.0 December EPAS Midi User Manual EPAS35

Issue 2.0 December EPAS Midi User Manual EPAS35 Issue 2.0 December 2017 EPAS Midi EPAS35 CONTENTS 1 Introduction 4 1.1 What is EPAS Desktop Pro? 4 1.2 About This Manual 4 1.3 Typographical Conventions 5 1.4 Getting Technical Support 5 2 Getting Started

More information

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC Automatic Battery Charger Switching mode with Micro-controlled Input:220-260Vac / Output: 12Volt DC User s Manual and Important Safety Information Model: OC-SW121080 / OC-SW121160 / OC-SW121210 FEATURES

More information

Jumpbox Model SP-12V1500-JB1

Jumpbox Model SP-12V1500-JB1 FLEET PRO 1500D Jumpbox Model SP-12V1500-JB1 Questions, missing parts, problems? Before returning to your retailer, send us a message through our Contact Us page on Starkpower.com ONE YEAR LIMITED WARRANTY

More information

Item no Smart AC 200 USB. User s Manual

Item no Smart AC 200 USB. User s Manual R Item no. 2402 Smart AC 200 USB User s Manual Smart AC 200 Watt with USB by Wagan Tech User s Manual Read before using this equipment Thank you for purchasing Smart AC 200 Watt with USB by Wagan Tech.

More information

Instruction manual. 0 Manual Control and Switch Panel DT 201 B. Table of contents

Instruction manual. 0 Manual Control and Switch Panel DT 201 B. Table of contents Instruction manual 0 Manual Control and Switch Panel DT 201 B Control and switch panel DT 201 B Table of contents 1 Introduction..........................................2 2 Safety information.....................................2

More information

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600 BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600 PART NO: 6261200 OPERATION & MAINTENANCE INSTRUCTIONS LS0815 INTRODUCTION Thank you for purchasing this CLARKE Battery booster / charger which is suitable

More information

Automatic Burnout Furnaces 115 to 230-volt Models OPERATOR S MANUAL

Automatic Burnout Furnaces 115 to 230-volt Models OPERATOR S MANUAL Automatic Burnout Furnaces 115 to 230-volt Models OPERATOR S MANUAL TABLE OF CONTENTS Introduction...3 Warranty...3 On-Line Warranty Registration...3 Safety Instructions........................................................3

More information

DC TO AC POWER INVERTER PWRIC150012W INSTRUCTION MANUAL

DC TO AC POWER INVERTER PWRIC150012W INSTRUCTION MANUAL DC TO AC POWER INVERTER PWRIC150012W INSTRUCTION MANUAL SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts

More information

AUTO PUMP STATUS CENTER

AUTO PUMP STATUS CENTER INSTRUCTION MANUAL AUTO PUMP STATUS CENTER VOLTAGE & PRESSURE MODEL #: 091-198-12-PP File: IM_091-198-12-PP_revD.indd Rev: D Revised By: MFG/PSS Date: 1-30-2015 3 YEAR WARRANTY scan using your mobile device

More information

Features: Enhanced throttle response, excellent acceleration, linearity and driveability

Features: Enhanced throttle response, excellent acceleration, linearity and driveability 120A/150A ESC X-Car 120A/150A Series Sensored/Sensorless Brushless ESC for 1:8 scale Car or Truck Thank you for purchasing the X-Car Brushless Electronic Speed Controller (ESC). The X-Car 1:8 Scale 120A/150A

More information

UltraCell XX25-A1. Operating Manual

UltraCell XX25-A1. Operating Manual XX25-A1 Operating Manual XX25-A1 unit not for commercial distribution This product has been released for test purposes only Startup and operation limited to trained personnel only Patents Pending December,

More information

Rescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference

Rescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference Please dispose of Packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

Installation and Operating Instructions. MPPT Solar System Controller ISC3040

Installation and Operating Instructions. MPPT Solar System Controller ISC3040 Installation and Operating Instructions MPPT Solar System Controller ISC3040 ABOUT THIS MANUAL These operating instructions come with the product and should be kept with it as a reference to all user s

More information

BMS16T BMS24T. Thanks for your purchasing the BMS16T or BMS24T for your vehicle.

BMS16T BMS24T. Thanks for your purchasing the BMS16T or BMS24T for your vehicle. BMS16T BMS24T for 2S-16S or 2S-24S LiPo, LiFe & LiTO Low power consumption High accuracy 2.8 TFT LCD display Programmable Thanks for your purchasing the BMS16T or BMS24T for your vehicle. Read the ENTIRE

More information

Operating Manual MP-3739

Operating Manual MP-3739 Operating Manual MP-3739 1 About this manual These operating instructions come with the product and should be kept for the life of the product for proper installation and usage. Read these operating instructions

More information

Begin to Use The New ESC: Before use the new ESC please carefully check every connections are correct or not. Yellow motor wire B Blue motor wire A

Begin to Use The New ESC: Before use the new ESC please carefully check every connections are correct or not. Yellow motor wire B Blue motor wire A HIMOTO ZTW Brushless Electronic Speed Control for car or truck Thank you for purchasing ZTW Brushless Electronic Speed Controller(ESC). The ZTW electronic speed control (ESC) is specifically designed for

More information

Foreword

Foreword Foreword Content 1. Summary 2. Safety instruction Safety Symbol Indication Attention Static discharge sensitive Electric shock Dangerous Indicate risk of serious injury or death or seriously damage the

More information

Installation Guide Smart-UPS On-Line SRT1000/1500 UXI-NCLI, SRT1000/1500 UXI-LI, Tower/Rack-Mount

Installation Guide Smart-UPS On-Line SRT1000/1500 UXI-NCLI, SRT1000/1500 UXI-LI, Tower/Rack-Mount Installation Guide Smart-UPS On-Line SRT1000/1500 UXI-NCLI, SRT1000/1500 UXI-LI, Tower/Rack-Mount Important Safety Messages Read the instructions carefully to become familiar with the equipment before

More information

INSTRUCTION & INSTALLATION

INSTRUCTION & INSTALLATION INSTRUCTION & INSTALLATION MANUAL MODELS: CCL-eHOME T1C16 CCL-eHOME T1C32 CCL-eHOME T2C16 CCL-eHOME T2C32 WALLBOX ehome SERIES WALLBOX ehome Instruction and Installation manual This document is copyrighted,

More information

Important instructions

Important instructions Operation manual Please read this manual, before starting the unit. It contains important notes on commissioning and handling. Keep these instructions for future reference. Be careful even if you pass

More information

Table of Contents HAVE A QUESTION? WE RE HERE TO HELP. CALL US AT OR VISIT JACOINC.COM/SUPPORT

Table of Contents HAVE A QUESTION? WE RE HERE TO HELP. CALL US AT OR VISIT JACOINC.COM/SUPPORT 25-0186 Rev 02 Table of Contents 500 SERIES, MODEL & PART NUMBERS... 2 SYMBOL INFORMATION... 3 PRODUCT LABELING... 3 GENERAL MOBILE CART SPECIFICATION... 4 SAFETY RECOMMENDATIONS AND WARNINGS... 5 PROPER

More information

Installation Guide Smart-UPS On-Line External Battery Pack XBP48RM1U-LI

Installation Guide Smart-UPS On-Line External Battery Pack XBP48RM1U-LI Installation Guide Smart-UPS On-Line External Battery Pack XBP48RM1U-LI Important Safety Messages Read the instructions carefully to become familiar with the equipment before trying to install, operate,

More information

Fleet Micro Series Advanced Battery Charging System Dual and Quad Instructional Manual

Fleet Micro Series Advanced Battery Charging System Dual and Quad Instructional Manual Fleet Micro Series Advanced Battery Charging System Dual and Quad Instructional Manual Introduction: Thank you for your choice in purchasing a Core SWX Fleet Micro Charger. The charger is designed to provide

More information

User manual Temperature Calibrator JOFRA CTC-140/320/650 A/B JOFRA CTC-1200 A Copyright 2005 AMETEK DENMARK A/S ( UK)

User manual Temperature Calibrator JOFRA CTC-140/320/650 A/B JOFRA CTC-1200 A Copyright 2005 AMETEK DENMARK A/S ( UK) User manual Temperature Calibrator JOFRA CTC-140/320/650 A/B JOFRA CTC-1200 A Copyright 2005 AMETEK DENMARK A/S (123199-UK) FIG. 1 1 2 3 4 5 CALI BRAT ION I NSTRUM ENTS 6 + - Switch Test RS232 7 8 11

More information

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900 BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900 PART NO: 6261205 OPERATION & MAINTENANCE INSTRUCTIONS LS0715 INTRODUCTION Thank you for purchasing this CLARKE Battery booster / charger which is suitable

More information

REV F2.0. User's Manual. Hydraulic ABS (HABS) Hydraulic Power Brake (HPB) Page 1 of 28

REV F2.0. User's Manual. Hydraulic ABS (HABS) Hydraulic Power Brake (HPB) Page 1 of 28 REV F2.0 User's Manual Hydraulic ABS (HABS) Hydraulic Power Brake (HPB) Page 1 of 28 Table of Contents INTRODUCTION...4 Starting TOOLBOX Software... 5 MAIN MENU...6 System Setup... 6 Language... 7 Select

More information

User Manual. User Manual IQ 328+

User Manual. User Manual IQ 328+ User Manual IQ 328+ Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. Please follow the safety and care instructions in

More information

Installation and Operating Instructions. Solar System Controller ISC3030

Installation and Operating Instructions. Solar System Controller ISC3030 Installation and Operating Instructions Solar System Controller ISC3030 ABOUT THIS MANUAL These operating instructions come with the product and should be kept with it as a reference to all user s of the

More information

Pro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.

Pro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

IV. PROOF OF PURCHASE: A warranty claim must be accompanied by proof of the date of purchase.

IV. PROOF OF PURCHASE: A warranty claim must be accompanied by proof of the date of purchase. PD9100 / 9200 SERIES POWER CONVERTER OWNERS MANUAL PROGRESSIVE DYNAMICS, INC. POWER CONVERTER LIMITED WARRANTY I. LIMITED WARRANTY: Progressive Dynamics, Inc. warrants its power converter to be free from

More information

Instruction Manual. H.I.D Digital Ballasts 400W 600W 1000W. All our ballasts are compatible with Safe Grow Hydroponic Smart System.

Instruction Manual. H.I.D Digital Ballasts 400W 600W 1000W. All our ballasts are compatible with Safe Grow Hydroponic Smart System. Instruction Manual H.I.D Digital Ballasts 400W 600W 1000W All our ballasts are compatible with Safe Grow Hydroponic Smart System. IMPORTANT PRODUCT INFORMATION READ IMMEDIATELY SAFETY FIRST! Failure to

More information

V4 Cordless Lamp System User Guide

V4 Cordless Lamp System User Guide V4 Cordless Lamp System User Guide Contents Welcome Important Notes Components + Connection Diagram Charging Status Indicator Charging the Battery Lamp Control + Operating Modes Turning Function Operating

More information

DRIFTER Manual. Please read the Installation section of this manual before installing the product.

DRIFTER Manual. Please read the Installation section of this manual before installing the product. DRIFTER Manual Please read the Installation section of this manual before installing the product. Copyright Setec 2014 Disclaimer Setec makes no claim as to the accuracy or suitability of the information

More information

SL2380. Installer s guide. Owner skit. Blind control device Battery module.

SL2380. Installer s guide. Owner skit. Blind control device Battery module. SL2380 1 Owner skit Blind control device Battery module Installer s guide www.pellini.net BATTERY MODULE SL2380 The battery module SL2380 supplies power to the W system ScreenLine motorised blind. The

More information

Where There is Miboxer There is Power. User Manual. Model No.: C2-6000

Where There is Miboxer There is Power. User Manual. Model No.: C2-6000 Where There is Miboxer There is Power User Manual Model No.: C2-6000 Introduction C2-6000 is a highly advanced battery charger, that includes a power bank function. The charger automatically adapts the

More information

CP900EPFCLCD User s Manual K

CP900EPFCLCD User s Manual K CP900EPFCLCD User s Manual K01-0000190-00 IMPORTANT SAFETY INSTRUCTIONS This manual contains important safety instructions. Please read and follow all instructions carefully during installation and operation

More information