PRODUCT INFORMATION. The WheelHorse

Transcription

1 PRODUCT INFORMATION The WheelHorse

2 PRODUCT INFORMATION The WheelHorse - The versatile forest machine Have You missed a machine for small scale forest work that are developed for accessibility, capacity and usability? We are extremely pleased to be able to present a revolutionary concept that involves an articulated thinning forwarder that you can both go on and manage by the joystick you know from IronHorse. We have used well-tried technology solutions from Iron Horse and combined this with the need for a new thinning forwader to the small-scale forestry. Just as the Iron Horse The Wheel Horse is a complete system for forest, farm and transport in different terrain. Flexibility, strength, and low ground pressure makes it an environmentally friendly alternative to heavier machines. The machine is easy to operate and easy to get started and work with. In comparison to the many ATV vehicles with trailers, this product is fully developed for practical use in the forest and at the same time, it has properties that allow it to quickly run slightly longer distances, due to its high speed gear.

3 MACHINE THE WHEELHORSE WheelHorse with T1700 4WD Part. No crane with grip 330 The WheelHorse is equipped with the reliable Honda engine of 13 Hp The vehicle is unique with its mechanical transmission and high- and low gear. The hydraulic engagement on the trailer is easy to control from the steering handle and the machine has 6 wheel traction, when there are need extra power for pulling. The trailer is equipped with a powerful grip that have a big lift capacity comparing to it size. Dim (mm) w x h x I Max load capacity Transmission Hydraulic Total weight incl. trailer Engine Traction trailer Max speed Cranes reach/lifting capacity Support legs Length WheelHorse with T1750 4WD 1300x1990x4650 (*incl rollover bar) 1500 Kg Variator/gearbox/Chain transmison Double pump 1,9/3,8 cm Kg Honda air Cold 4-stroke OHV Hydraulic transmission 15/6 km/h (gear high/low) 3,3 m/150kg 1,2 350 Kg Hydraulic 25 m Part. No crane with grip The WheelHorse is equipped with the reliable Honda engine of 13 Hp The vehicle is unique with its mechanical transmission and high- and low gear. The hydraulic engagement on the trailer is easy to control from the steering handle and the machine has 6 wheel traction, when there are need extra power for pulling. The trailer is equipped with a powerful grip that have a big lift capacity comparing to it size. Max load capacity Traction trailer Cranes reach/lifting capacity Support legs Crane Extensionsbar 90 cm Cranes reach/lifting capacity 2000 Kg Hydraulic transmission 3,5 m/240 Kg 1,2 600 Kg Hydraulik 4,4 m/160 Kg

4 ACCESSORIES WHEELHORSE Dredger bucket DS55 Part. No Dredger bucket is an accessory for the WheelHorse crane to be attached where the grip is mounted. It s perfect to have when cleaning the ditches or other areas combined with the dumper trailer. Also good to use when transporting soil, gravel or stones. Volume is 60 liter. Dumper trailer FL250V Part. No FL250V dumper trailer is adapted for tough handling, 3 mm thick plate in the lower part and reinforced side flaps. It s equipped with double rear folded flaps. You can transport soil, gravel, stones and equipment even people easily. The total trailer is galvanized for optimal long life span. Length: Total height flaps: Width: 225 cm 50 cm 122 cm Bracket for Gasoline can 10L Part. No Practical bracket for gasoline can.

5 Hydraulic winch, radio controlled Part no RC Hydraulic winch HV500 is a reliable and proven construction. The winch kit is complete with also radio controlled box, wire, hock, hoses, and electrical controlled hydraulic valve. Weight Speed Oil pressure Maximum pull strength Rec. Oil flow Radio controlled Wire/thickness Range RC Wire length 11 Kg 30 m/min 190 bar 500 Kg l/min 2 channels 5 mm Ca 50 m 25 m Snow chains Part No With the snow chains attached on the front wheels, You get the protection for preventing to slip. Meassure 10.0/75-15,3 Snow blade Part No Snow blade incl. the attachment rig is adapted to the WheelHorse and is easily mounted onto the machine. The attachment rig will be permanente attached to the machine, and when You need the blade You easily attaché the blade to the rig easily with 2 pins. It s the same easy procedure when You are disconnecting the blade from the machine. Width Height 182 cm 52 cm

6 Working lights LED 10-80V Part No LED lights are low power and have high tolerate of vibration and gives an terrific light. Every LED has it s own reflektion sektor. Winch for snowblade Part No WARN RT25 winch has a well-tested technic, high quality and modern engine which gives it a long life span with low power consumption.

7 Lennartsfors AB, has extensive experience in mechanical manufacturing, including as a manufacturer of office equipment, automotive components, and woodworking. Most of the employees have personal experience of practical work in the forest or woodworking, which means that we understand the importance of good quality and ease of use Milestones Was founded in 1947, the mechanical workshop that is the basis for the current operations was started the production of the first Swedish-built liquid duplicator Facit Answers Plento. In the early 1970s - were started production of woodworking machinery. Nowadays the business consists of the manufacturing of products for small-scale forestry and various transportation in terrain. The program consists of several models sawmill, The IronHorse and Wheelhorse. Various sub contraction manufactures are also performed an own subsidiary of Lennartsfors AB was formed manufacturing mopeds from Norsjö Mechanical AB in Forshaga. Today they are manufactured and marketed in Lennartsfors but under the name Norsjö Moped. Development and production Development is mainly done with own resources or in near co-operation with technology providers working closely with various agencies and users. Operations are carried out in a close relationship with nature and the environment. High level of expertise, quality and security are important to us constituents and all this should be reflected in our products. In order to satisfy the requirements for rational production, optimum quality and to the customer the best total economy, we have implemented a number of investments in both administrative systems and various production equipment. In addition to design and development department consists of our resources of modern machinery that includes various NC machines for cutting, robotic welding, environmentally friendly powder coating, assembly, and warehouse and distribution capacity. Our combined resources and experience, where our staff are our greatest asset, providing us with unique opportunities to work from concept to final product and distribution

8 Top speed is 15 km/h, on high gear! Lennartsfors AB Lennartsfors 1 S ÅRJÄNG Tel. +46 (0) Sweden Website Dealer