PART # PRODUCT DESCRIPTION RRP INC GST X-POWER 500 watt MSW Inverter / 12 Volt $ PART # PRODUCT DESCRIPTION RRP INC GST

Transcription

1 POWER INVERTERS MODIFIED AND PURE SINE WAVE DC to AC Inverters: XANTREX X-POWER Consumer Modified Sine Wave X-POWER 500 watt MSW Inverter / 12 Volt $ Low cost power inverter alternative, with a great 2 Year warranty back up support. All units have the required DC connection cables included, have high surge capabilities (over 2 x rated power), and will offer great performance at a reasonable price. Output is Modified Sine Wave from these Inverters. Include DC connection cables. DC to AC Inverters: XANTREX PROwatt SW Consumer Pure Sine Wave PROwatt SW Pure Sine Inverter 700 watt / 12 Volt $ PROwatt SW Pure Sine Inverter 1400 watt / 12 Volt $ PROwatt SW Remote Control Panel with ignition lockout $ DC to AC Inverters: TBS Powersine Pure Sine Wave DISCOUNTS AVALIBLE FOR BULK BUY IN LOTS OF 3,6,& 9. CALL US FOR PRICING New in 2011, a lower cost power inverter alternative from Xantrex, with their no-fuss great 2 Year warranty back up support. All units have very solid bolt on DC connection points for secure connections of battery cables. They feature high surge capabilities (over 2 x rated power), and will offer great performance at a reasonable price. Output is Pure Sine Wave from these Inverters (no transfer switch included). For more professional systems look to either TBS or PROsine models. A-200i-12 POWERsine 200 watt 12v Pure Sine wave Inverter $ A-200i-24 POWERsine 200 watt 24v Pure Sine wave Inverter $ A-200i-48 POWERsine 200 watt 48v Pure Sine wave Inverter $ A-300i-12 POWERsine 300 watt 12v Pure Sine wave Inverter $ A-350i-24 POWERsine 350 watt 24v Pure Sine wave Inverter $ A-600i-12 POWERsine 600 watt 12v Pure Sine wave Inverter $ A-800i-24 POWERsine 800 watt 24v Pure Sine wave Inverter $ A-1600i-12 POWERsine 1600 watt 12v Pure Sine wave Inverter $ 2, A-1800i-24 POWERsine 1800 watt 24v Pure Sine wave Inverter $ 2, Serious power with reliability and quality AC power at the centre of their design brief. If you want a quality product, that will provide years of trouble free operation, then look no further than the TBS inverter range Proudly designed and built in the Netherlands 2 Year Product Warranty

2 POWER INVERTERS MODIFIED AND PURE SINE WAVE DC to AC Inverters: XANTREX PROsine Pure Sine Wave PROsine 1000i / 12 volt inverter (with auto AC transfer switch) $ 1, PROsine 1000i / 24 volt inverter (with auto AC transfer switch) $ 1, PROsine 1800i / 12 volt inverter (with auto AC transfer switch) $ 2, PROsine 1800i / 24 volt inverter (with auto AC transfer switch) $ 2, PROsine with RCD & GPO GPO PROsine 1000w / 12 volt inverter (with Built in RCD & GPO) $ 1, GPO PROsine 1800w / 12 volt inverter (with Built in RCD & GPO) $ 2, GPO PROsine 1000w / 24 volt inverter (with Built in RCD & GPO) $ 1, GPO PROsine 1800w / 24 volt inverter (with Built in RCD & GPO) $ 2, IMPORTANT INSTALLERS NOTE: Enerdrive offers the ability for your PROsine supplied with the Auto AC transfer switch, to now have an automatic Mains Earth Neutral (M.E.N) fitted internally in the inverter. This is a new required component for power inverters under the new Australian standard. Please ensure that appropriate electrical safety guidelines are complied, and that a Residual Current Device (RCD) is used after inverter output. **MUST BE SPECIFIED AT TIME OF ORDER** Circuit Fuse Protection CIRCUIT BREAKERS AND FUSE PROTECTION Mega250 In Line DC Fuse kit for PROsine and any inverter between watts. Not suitable for transformer based inverters $ TFB 300 Enerdrive Class T In-Line DC Fuse & Holder 300 amps rating $ TFB 400 Enerdrive Class T In-Line DC Fuse & Holder 400 amps rating $ TFB 300S Spare Class T Fuse 300 amp rating $ TFB 400S Spare Class T Fuse 400 amp rating $ Every good DC power system needs a fuse, and our Bussman and Class T are perfect for almost every high amperage set up. Bussman are perfect for all switch-mode inverters up to around the 2000 watts power range, and the Enerdrive Class T are best for all transformer based inverters.

3 SMART MULTI-STAGE BATTERY CHARGERS Smart Battery Chargers: XANTREX TRUEcharge2 **Latest Design in Smart Chargers** 12 Volt TRUEcharge2 Range TRUEcharge2 20amp / 12v Smart Charger Three Output $ TRUEcharge2 40amp / 12v Smart Charger Three Output $ TRUEcharge2 60amp / 12v Smart Charger Three Output $ DISCOUNTS AVALIBLE FOR BULK BUY IN LOTS OF 3,6,& 9. CALL US FOR PRICING 24 Volt TRUEcharge2 Range Due The Beginning of TRUEcharge2 10amp / 24v Smart Charger Three Output $ TRUEcharge2 20amp / 24v Smart Charger Three Output $ TRUEcharge2 30amp / 24v Smart Charger Three Output $ Optional Accessories Optional Remote Control Display With Full Function Control $ Temperature Sensor to Suit TRUEcharge2 with 6 meter lead $ The revolution in smart battery chargers is here. The TRUEcharge2 is the next generation for the long term success of the original TRUEcharge smart battery charger. Providing power factor corrected charging for the most efficient and exact charge of up to 3 battery banks. IP32 drip proof rating, low noise fan and full charging current rated at 50 C. Ability to exactly charge Wet, Gel, AGM or Calcium battery technology (via selectable switches no guessing). Easily run the 40amp model off a small 1000watt generator, and be assured of quick, effortless charging while on the go. TRUEcharge2 Chargers excel in battery charging conditions where constant loads are running from battery while charger is on For an understanding why this is so important be sure to talk to Enerdrive. 2 YEAR WARRANTY and great looks makes this the number 1 choice in battery chargers. How s This For a Smart Battery Charger Xantrex TRUEcharge2 works perfectly under full battery load, and will complete a full charge cycle to float, regardless if a load exists on the battery system. The graph opposite shows the frequent microprocessor testing of the charger, and shows the perfect multi-stages included in the chargers design.

4 SMART MULTI-STAGE BATTERY CHARGERS Smart Battery Chargers: TBS Omnicharge Programmable Charger Series Omnicharge 12v / 40amp Charger with 2 Outlets vac Input $ Omnicharge 12v / 60amp Charger with 2 Outlets vac Input $ 1, Omnicharge 24v / 20amp Charger with 2 Outlets vac Input $ Omnicharge 24v / 30amp Charger with 2 Outlets vac Input $ 1, TBS Universal Remote Control Panel $ Omnicharge 12-60, 12-40, & TBS Electronics introduces a number of newly developed state of the art programmable battery chargers. The latest power conversion techniques have been incorporated to set new reliability and efficiency standards. Combining new power conversion techniques and the best available parts with years of power electronics design expertise, the Omnicharge battery chargers will deliver long life performance even in the most demanding applications. A unique active rectifier output stage ensures unmatched efficiency figures. Combined with active PFC, the Onmicharge battery chargers are very energy efficient. This will reduce running costs and guarantees a maximum charge current per ac wats All Omnicharge battery chargers are equipped with advanced 4 stage charging algorithms and temperature compensation for optimal battery performance and long lifetimes. Users are also allowed to create a custom charging algorithm for their specific battery, using the TBS "Dashboard" software. The standard available TBSLink port enables remote control and readout via the optional TBS Universal Remote Panel. Fully programmable Universal AC input with PFC Two outputs Very efficient intelligent charging algorithms 24 month warranty UNITS FEATURE ALARM OUTPUT RELAYS FOR REMOTE MONITORING 2 YEAR WARRANTY

5 SMART MULTI-STAGE BATTERY CHARGERS Smart Battery Chargers: Delta-Q Electric Vehicle Smart Chargers QuiQ smart battery charger 24 volt / 25amps charger $ QuiQ smart battery charger 36 volt / 21amps charger $ QuiQ smart battery charger 48 volt / 18amps charger $ DCI QuiQ smart battery charger 48 volt / 18amps charger with 12v DCI $ 1, QuiQ smart battery charger 72 volt / 12amps charger $ QuiQ smart battery charger 96 volt / 10amps charger $ 1, DELTA-Q Accessories QuiQ PC Programmer For Trade use only Battery Charging for Higher voltage ranges, 24v, 36v, 48v, 72v & 96v The perfect choice for all your Electric Vehicle and Electric motor requirements. Waterproof IP65 design with the exact charging algorithms to suit individual battery brands exactly. These chargers are becoming the standard fit across all Golf Carts in a very short period of time. 2 Year Warranty Programmer only to be used for internal use (suggested if large numbers of Delta-Q chargers are sold to various battery types). Delta-q chargers are just about everywhere now, with most major OEM brands of golf buggies, work platforms, floor scrubbers etc standardising on Delta-q for all their charging requirements. Smart Battery Chargers: Mori High Output Professional Smart Chargers PSW2460 Mori PowerSwitch 24v / 60amp smart battery charger $ 1, PSW2490 Mori PowerSwitch 24v / 90amp smart battery charger - PFC $ 2, PSW24120 Mori PowerSwitch 24v / 120amp smart battery charger - 3 phase $ 3, PSW24240 Mori PowerSwitch 24v / 240amp smart battery charger - 3 phase $ 5, PSW3640 Mori PowerSwitch 36v / 40amp smart battery charger $ 1, PSW3660 Mori PowerSwitch 36v / 60amp smart battery charger - PFC $ 2, PSW4830 Mori PowerSwitch 48v / 30amp smart battery charger $ 1, PSW4845PFC Mori PowerSwitch 48v / 45amp smart battery charger - PFC $ 2, PSW4865 Mori PowerSwitch 48v / 65amp smart battery charger - PFC $ 3, PSW4880 Mori PowerSwitch 48v / 80amp smart battery charger - 3phase $ 2, PSW48120 Mori PowerSwitch 48v / 120amp smart battery charger - 3 phase $ 4, Battery Charging for Higher voltage ranges, 24v, 36v, 48v & 72v. The PowerSwitch switch mode charger range are designed to recharge whatever battery type you require, from traction to standby type. The main feature of the Mori range is their ability to be properly set up and configured without the use of dip switches, instead using a PC programmer. Mori are very lightweight vs their power output and will be perfect for all commercial charging applications you might have. Products manufactured in Italy. 2 Year Warranty

6 BATTERY MONITOR SYSTEMS Enerdrive Battery Monitors: Smart, Precise Windows to Your Batteries EN55010 EN55030 EN55040 Enerdrive elite Battery Monitor. 12v to 24v range battery monitor including 500amp shunt. Two voltage inputs (main and start battery), single alarm output based upon % State of charge. Shows Volts, Amps, Amp-hours and percentage state of charge. Perfect for nearly all battery monitor requirements. Enerdrive epro Battery Monitor. 12v to 24v range battery monitor including 500amp shunt. Adaptable up to 500vdc battery system using optional prescaler kit ( ). Two voltage inputs (main and start battery), and multiple alarm outputs (voltage, state of charge, DC load, and programmable set points). Shows Volts, Amps, Amp-hours, Percentage State of Charge & Time to go. epro HV Model. Same model as PRO version however designed specifically for 36 to 48 volt battery banks. No Prescaler required with input window from 14 to 70vdc. Perfect for all professional installations $ $ $ PC Communication Kit to Suit Enerdrive epro monitors, includes bundled software. Allows recording of all parameters including temperature (via additional temp sensor) - USB Connection $ PC Communication Kit Same as above but with RS232 Connection $ Prescaler kit for retro fit of all other battery monitors up to 500vdc $ Battery Monitor temperature sensor to suit epro only. $ epro Alarm expander board expands alarm relays from 1 to 4 $ Twisted pair battery monitor connection cable. Available in per meter lengths, or cut to bulk roll length as required. Ask us for bulk per meter price. 4 pair Colour coded, tinned and the correct gauge as recommended for use with all battery monitors. $ 5.50 P/m EN5-QC1.5 EN5-QC3.0 EN5-QC5.0 EN5-QC10.0 emonitor Quick Connect Adaptor with 1.5m Cat5e Cable emonitor Quick Connect Adaptor with 3m Cat5e Cable emonitor Quick Connect Adaptor with 5m Cat5e Cable emonitor Quick Connect Adaptor with 10m Cat5e Cable Battery monitors are the window to your batteries, and now Enerdrive has released two all new models. The elite is perfect for nearly all applications, at a more affordable price. For professional installations, the epro is the only choice with more alarm adaptability and programming points of the meter. For higher voltage set ups simply connect with optional prescaler or use dedicated epro HV model.

7 INVERTER / CHARGER COMBINATION SYSTEMS Pure Sine Wave Inverter / Charger Combi s : MAGNASINE by Enerdrive Magnasine 230v Units Includes MS-RC50 Remote & battery temperature sensor standard. MMS-912E MS-1512E MS-2712E MS-4124E MS-4348PE MagnaSine 900watt / 12 volt Pure sine wave Inverter / Charger Combi. 40amp 5 stage battery charger included (PFC). MS912E is rated at 30 minute surge power of 1100watts AC; and a peak surge for 5 seconds of 1600watts. Constant power at 25 C is 900watts. MagnaSine 1500watt / 12 volt Pure sine wave Inverter / Charger Combi. 70amp 5 stage battery charger included (PFC). MS912E is rated at 30 minute surge power of 0000watts AC; and a peak surge for 5 seconds of 0000watts. Constant power at 25 C is 1500watts. MagnaSine 2700watt / 12 volt Pure sine wave Inverter / Charger Combi. 125amp 5 stage battery charger included (PFC). MS2700 is rated at 30 minute surge power of 3500watts AC; and a peak surge for 5 seconds of 4100watts. Constant power at 25 C is 2700watts. Now with TFB 400amp fuse & Holder included MagnaSine 4100watt / 24 volt Pure sine wave Inverter / Charger Combi. 105amp 5 stage battery charger included (PFC). MS4100 is rated at 30 minute surge power of 4600watts AC; and a peak surge for 5 seconds of 6300watts. Constant power at 25 C is 4100watts. Now with TFB 300amp fuse & Holder included MagnaSine 4300watt / 48 volt Pure sine wave Inverter / Charger Combi. 60amp 5 stage battery charger included (PFC). MS4348PE is rated at 30 minute surge power of 0000watts AC; and a peak surge for 5 seconds of 0000watts. Constant power at 25 C is 4300watts. $ 1, $ 2, $ 3, $ 4, $ 4, Magnasine 110v Units Includes MS-RC50 Remote & battery temperature sensor standard. Enerdrive TFB fuse & Holder to match MS-2712E & MS-4124E Combo Units now included at no Charge. MS-2812 MS-4024 MS-4024PE MagnaSine 2800watt / 12 volt Pure sine wave Inverter / Charger Combi. 125amp 5 stage battery charger included (PFC). MS2812 is rated at 30 minute surge power of 3000watts AC; and a peak surge for 5 seconds of 3900watts. Constant power at 25 C is 2800watts. MagnaSine 4000watt / 24 volt Pure sine wave Inverter / Charger Combi. 105amp 5 stage battery charger included (PFC). MS4000 is rated at 30 minute surge power of 4500watts AC; and a peak surge for 5 seconds of 5800watts. Constant power at 25 C is 4000watts. MagnaSine 4000watt / 24 volt Pure sine wave Inverter / Charger Combi. 105amp 5 stage battery charger included (PFC). MS4000PE is rated at 30 minute surge power of 4500watts AC; and a peak surge for 5 seconds of 5800watts. Constant power at 25 C is 4000watts. $ 3, $ 4, $ 4,000.00

8 INVERTER / CHARGER COMBINATION SYSTEMS Pure Sine Wave Inverter / Charger Combi s : MAGNASINE by Enerdrive MS-ARC50 Upgrade MS-RC50 MS-ARC50 ME-BMK ME-AGS-N ME-AGS-S ME-SBC This is to upgrade the MS-RC50 to the MS-ARC50 which gives you more control of the Auto Gen Start features and other advanced programming. This price is to upgrade remote when buying a Magnasine Kit. Large format LCD remote with rotary push type knob and fast access buttons. Only required separately when using Automatic Generator Start function without MagnaSine Combi system. Like the MS-RC50 but the MS-ARC50 gives you more control of the Auto Gen Start features and other advanced programming. MagnaSine Battery Monitor Kit. All the functions you ever need for single bank battery monitoring via a 500amp/50mV shunt. Includes all wiring required for connection along with the voltage / current sense module. A must for all installations Automatic Generator Start device for use with MagnaSine Combi s. Enjoy all the freedom and automation of having a hybrid power system combining your on-board generator, Combi and batteries. Compatible with most generators with 2 or 3 wire start function. This Automatic Generator Start device is for stand alone use with no Combi system. Requires integration with MS-RC50 controller. Smart Battery Combiner uses solid state control to direct the charge current from a single output Combi system to a secondary start battery. Charge current maintained at 25amps to secondary battery to prevent excess current and overcharging. $ $ $ $ $ $ $ Important NOTE: The MagnaSine by Enerdrive range of Inverter / Charger Combi s feature STANDARD the part MS-RC50 LCD remote control panel. This remote provides full EASY configuration of the entire MagnaSine series in one easy location (No PC required). The interface is via a Rotary push type knob for easy and intuitive use; along with hot press buttons to advance directly to specific parameters. The remote comes with a 15 meter length of 4wire / twisted pair for plenty of flexibility in where to install remote. Built from the base up, these Combi systems are a revolution in system design. MagnaSine was developed with many years of experience from brands you know and have trusted for well over the past decade. Quality, performance and reliability are their main design requirements. Pure Sine Wave output with massive surge capabilities due to simplified low frequency transformer design. The unit is also built for ease of install with bench or wall mount design and LARGE easy to access wiring compartments for AC, and external multi direction DC terminals. All remotes fit EXACTLY into most other competitors cut outs. Standard 2 year warranty, designed with construction based around a simple top down service philosophy. Talk to Enerdrive about the service abilities of the MagnaSine brand and how this will benefit your customers well into the future.

9 Enerdrive Voltage Sensitive Relays (VSR s) Dual Battery Controllers & Kits EN Enerdrive Voltage Sensitive Relay controller (VSR). 140amps of current, Dual sensing (will connect with charge from either battery source). $ Enerdrive Voltage Sensitive Relay Controller. With a set point of 13.3vdc for connection, and a disconnection voltage of 12.8vdc; this controller will be perfect for all lower voltage output type dual battery systems. 140amps of current capability and dual voltage sensing for bi-directional charging. Great looking packaging for any in-store application. Enerdrive Dual Battery Kit EN Enerdrive Dual Battery Kit Featuring; VSR, 3 x battery terminal clamps, battery cable positive & negative along with required accessories. $ In addition to the all new Enerdrive VSR product, we are pleased to present an all new dual battery kit. These look sensational, and come packaged with a full kit for any DIY installer. Includes all the required accessories and a full and extensive installation user manual for all DIY Installers. Cable is 16mm². Enerdrive Low Battery Cutouts (LBC) EN62001 EN62020 EN62030 Enerdrive Low Battery Cut out 12v-40amp 11±0.1 volts 12.8±0.1 volts Enerdrive Low Battery Cut out 12v-80amp 11±0.1 volts 12.8±0.1 volts Enerdrive Low Battery Cut out 24v-40amp 22±0.2 volts 25.6±0.2 volts Low Battery Cut Out Range $ $ $ The Enerdrive Low Battery Cut Out (LBCO) is used to prevent main battery excessively discharge. This system eliminates the possibility of draining the battery and protects sensitive electronic equipment powered from the house battery from harmful engine start up spikes.

10 Enerdrive Solar Panels Solar Panels PART # PRODUCT DESCRIPTION RRP INC GST SP-EN10W 10 Watt Mono-crystalline (305 x 305 x 30mm x 1.4kg) $ SP-EN20W 20 Watt Mono-crystalline (350 x 541 x 30mm x 2.56kg) $ SP-EN55W 55 Watt Mono-crystalline (840 x 541 x 35mm x 5kg) $ SP-EN80W 80 Watt Mono-crystalline (1195 x 541 x 35mm x 8.6kg) $ SP-EN130W 130 Watt Poly-crystalline (1482 x 676 x 35mm x 11.6kg) $ Solar panels including Folding Kits can be purchased In quantity of 10 buy with reduced cost. This can be made up of a mixed assortment of sizes. SP-SC10 SP-QC 2 x 5m Solar Cables with Enerdrive Plug at one End Quick Connect Parallel Panel Connectors x Pair Please Note: Due to freight and packing issue we cannot split 80w and 130w panels. These need to be purchased in packs of 2. Enerdrive Folding Solar Panels Our range of Mono-Crystalline panels starts at 10watts and has the sizes up to 80watts. In larger modules we have a 130watt Poly- Crystalline module in our range. Each module is typically around 20+vdc open circuit and are well suited to 12v installations (or 24v by series connections of panels). A fly lead cable is provided for connection of the 10 & 20w modules while the 55, 80 & 130w modules have Quick connect solar cable connectors (Commonly used on all Panels) included. (Enerdrive has spare cables in stock as well). Warranty 2 years Backed by Enerdrive. SPF-EN80W 80 Watt Mono-crystalline Folding Panel Kit 2 x 40w $ SPF-EN100W 100 Watt Mono-crystalline Folding Panel Kit 2 x 50w $ Solar panels including Folding Kits can be purchased In quantity of 10 buy with reduced cost. This can be made up of a mixed assortment of sizes.

11 Enerdrive Solar Regulators ENERDRIVE SOLAR PRODUCTS EN41010 Enerdrive 10amp Solar Controller with Load Disconnect $ EN41020 Enerdrive 20amp Solar Controller with Load Disconnect $ Protects battery from overcharge and discharge Only for 12 Volt solar panels and batteries Handles up to 20 Amps of Array Current Handles up to 350 Watts of solar power Maintenance free protection of your solar panel and batteries Maintains battery voltage 10 & 20 Amp Charge Controllers LED status indicator provides quick reference to Charger, Battery and load status Selectable battery type Temperature compensation High precision on voltage setpoint Wall mountable Dimensions: 10.5 x 10.5 x 3.4 cm(l x W x H) Weight: 0.3 kg 2 Year Warranty C35 C Series Multi Stage Solar Controller for 12 or 24 35amps $ C40 C Series Multi Stage Solar Controller for 12, 24, 48 40amps $ C60 C Series Multi Stage Solar Controller for 12 or 24 60amps $ Accessories for C-Series Controllers CM (DVM) LCD Display Panel for C Series Solar Controller - Fixed Mount $ CM/R-50 Remote Control for C Series Solar Controller - Remote Display $ BTS/35 C Series Battery Temperature Sensor - 3 Meter Lead $ The C-Series have long been regarded for their high output, reliability and ease of precise programmability. C-Series can be used for either a solar controller, or load control device. For PV monitoring use either of the remote control options listed above. 2 Year Warranty

12 MORNINGSTAR SOLAR PRODUCTS Morningstar TriStar MPPT Solar Charge Controllers: SR-TS-MPPT-45 SR-TS-MPPT-60 TS MPPT 45AMP Solar Controller for 12, 24, 36, 48 45amps (Input 150voc) TS MPPT 60AMP Solar Controller for 12, 24, 36, 48 60amps (Input 150voc) Meter Not Supplied. See Accessories for Pricing $ $ Morningstar SunSaver MPPT Solar Charge Controllers: SR-SS-MPPT-15L Sunsaver 15amp MPPT for 12, 24 15amps (Input 75voc) $ Morningstar TriStar PWM Solar Charge Controllers: SR-TS-45 SR-TS-60 TS 45AMP Solar Controller for 12, 24, 48 45amps (Input 125voc) TS 60AMP Solar Controller for 12, 24, 48 60amps (Input 125voc) Meter Not Supplied. See Accessories for Pricing $ $ Morningstar ProStar PWM Solar Charge Controllers: SR-PS-30M PS 30M Solar Controller for 12, 24 30amps with Meter $ Morningstar SunSaver PWM Solar Charge Controllers: SR-SS-10L-24V SUNSAVER Solar Controller for 24 10amps $ SR-SS-20L-24V SUNSAVER Solar Controller for 24 60amps $

13 MORNINGSTAR SOLAR PRODUCTS Morningstar SunLight PWM Solar Charge Controllers: SR-SL-10-12V SUNLIGHT Solar Controller for 12 10amps $ SR-SL-10-24V SUNLIGHT Solar Controller for 24 10amps $ SR-SL-20-12V SUNLIGHT Solar Controller for 12 20amps $ SR-SL-20-24V SUNLIGHT Solar Controller for 24 20amps $ Morningstar SunGuard PWM Solar Charge Controllers: SR-SG-4 SUNGUARD-4amp Solar Controller for 12 4amps $ Morningstar Accessories: SR-TS-M-2 TriStar Digital Meter for use with TS & TS-MPPT $ SR-TS-RM-2 TriStar Remote Digital Meter for use with TS & TS-MPPT $ SR-HUB-1 Meter Hub to connect multiple units (SS-MPPT, TriStar, TS-MPPT, TS-M-2, TS-RM-2 or Relay Driver RD-1) $ About Morningstar Morningstar is a privately owned US corporation. Our commercial office is located near Philadelphia, and our engineering lab in Columbia, Maryland. Our products are manufactured in an ISO 9001 certified facility. Morningstar's products have been recognized in the international PV markets as the most advanced and highest-quality products available as noted below: Reliability : Exceeds all other PV controllers and inverters for protection against lightning surges and the harsh operating temperatures common to remote PV systems. Battery Charging : Advanced PWM, constant voltage, pulsing charge algorithm results in an increase in battery capacity and operating life.

14 REDARC POWER CONVERTERS AND ACCESSORIES REDARC Power Conversion Products SBI-12 12volt Dual Battery Isolator 100amp current rating *Top Seller* $ SBI-24 24volt Dual Battery Isolator 100amp current rated relay $ VOLTAGE REDUCERS SMF20 Voltage Reducers 24v to 12v - 20amps $ SMF30 Voltage Reducers 24v to 12v - 30amps $ SMF40 Voltage Reducers 24v to 12v - 40amps $ SMF60 Voltage Reducers 24v to 12v - 60amps $ CHARGE EQUALISERS CE Switch mode Charge Equalizer 20amp with 13.8 constant out $ CE Switch mode Charge Equalizer 30amp with 13.8 constant out $ CE Switch mode Charge Equalizer 40amp with 13.8 constant out $ BCDC1220 Smart DC to DC 3 Stage Battery charger 20amps $ BCDC1240 Smart DC to DC 3 Stage Battery charger 40amps with MPPT $ We support the Australian Made REDARC range of products, and can offer any specific product in their range. We have only listed a handful of the more popular products we supply. If products are not listed, Please contact Enerdrive for pricing.

15 BALMAR ALTERNATORS AND REGULATORS Alternator Regulators: Balmar Max Charge Series (Premium Range) & Centerfielder MC614-H Balmar MC-614 Series 12volt Alternator Regulator w / Harness $ MC624-H Balmar MC-624 Series 24volt Alternator Regulator w / Harness $ CF-12/24 Balmar Centerfielder Alternator Balancing Controller 12 or 24v $ The Max Charge Series is the premium range of smart alternator regulator controllers offered by Balmar. Includes 7 selectable settings for standard deep cycle batteries as well as gel, AGM and spiral wound batteries such as Optima. The MC 612 Series can be used to regulate two separate alternators into one battery bank with the addition of the Centerfielder controller. The Centerfielder is essential in any twin engine charging system and works in either 12 or 24v configurations and ONLY WORKS with MC612 & MC624 Series regulators. All Balmar Regulators operate in P-Type (Positive Field) Alternators ONLY. Ensure regulators are installed in a well ventilated location with temp lower than 43 C Alternator Regulators: Balmar ARS Series ARS-5H Balmar ARS-5 12volt Alternator Regulator w / Harness (P Type) $ The ARS Series is the simplified version of the Max Charge series, designed for more basic systems. Includes 5 preset battery programs. **The ARS-5 series can only be used on Single alternators feeding their own battery banks**. Temp sensors available (below). Ensure regulators are installed in a well ventilated location with temp lower than 43 C Alternator Regulators: Balmar Duo Charge DDC-12/24 Balmar Digital Duo Charge Dual Battery Controller / Charger $ The Duo Charge allows for high output smart alternators to direct their charge to the house bank (where the charge is required most), with the Duo Charge providing correct 3 stage battery charging to the start battery (not connected to the alternator output). With programmable battery type you can easily mix battery technologies between start and house banks. Single unit does either 12 or 24 volt DC and can use temp sensors (below) Alternator Regulators: Temperature Sensors MC-TS-A Balmar Alternator Temperature Sensor - 135cm long $ MC-TS-B Balmar Battery Temperature Sensor - 6m long $ Temperature sensors can be used with either the Max Charge or ARS-5 series regulators. Available for either alternator or battery sensing allows the regulator to more appropriately respond to ambient heat conditions. Above sensors can also be used with the Duo Charge for efficient dual bank charging.

16 High Power Alternators: Balmar 6-Series BALMAR ALTERNATORS AND REGULATORS PRODUCT PRICE LIST February 2012 (RRP) SR-IG Balmar 6 Series 70amp / 12v alternator suit Yanmar, Nani, Mercruiser with 3.15 dual saddle mount $ SR-IG Same as SR-IG but 100amp / 12v $ SR-IG Same as SR-IG but 120amp / 12v $ SR-IG Same as SR-IG but 70amp / 24v $ SR-IG Balmar 6 Series 70amp / 12v alternator suit Volvo, 1 or 2 Single foot mount $ SR-IG As above but 100amp / 12v output $ SR-IG Same as SE-IG but 120amp / 12v output $ SR-IG Same as SE-IG but 70amp / 24v output $ The 6-Series is the mainstay of the Balmar Alternator range, and the most common seller. For product specifications and exact engine mounting, refer to the Balmar catalogue (Contact us should you require copy via post or ). High Power Alternator Kits: Balmar 7, 94 & 95-Series Series 3.15 Saddle 80amps / 12v Single Pulley $ Series 3.15 Saddle 110amps / 12v Single Pulley $ Series 2 Single Foot 80amps / 12v Single Pulley $ Series 2 Single Foot 110amps / 12v Single Pulley $ IG 94-Series 2 Single Foot 165amps / 12v Dual Pulley $ 1, IG 94-Series 2 Single Foot 210amps / 12v Dual Pulley $ 1, IG 94-Series 2 Single Foot 140amps / 24v Dual Pulley $ 1, IG 95-Series 4 Saddle 165amps / 12v Dual Pulley $ 1, IG 95-Series 4 Saddle 210amps / 12v Dual Pulley $ 1, IG 95-Series 4 Saddle 140amps / 24v Dual Pulley $ 1, The Balmar range of Alternators is very extensive. Above we have listed a number of the more common type higher power alternators available from Balmar. For a complete price list by individual part number including spare parts please contact Enerdrive. PRICE LIST EFFECTIVE FROM FEBRUARY 2012 RRP PRICING Page 16