Sales, Orders and Enquiries. Tel: Fax: Web:

Transcription

1 HEAD OFFICE 1 Ramset Drive Chirnside Park, Victoria 3116 STATE BRANCHES VICTORIA 5/71 Victoria Crescent, Abbotsford Ramset Drive, Chirnside Park 3116 SOUTH AUSTRALIA 115 Sir Donald Bradman Drive, Hilton 5033 New South Wales 71 Carnarvon Street, Silverwater Gardeners Road, Mascot /8 Channel Road, Mayfield West 2304 ACT 5/19 Tennant Street, Fyshwick 2609 QUEENSLAND 53 Doggett Street, Newstead Ingham Road, Townsville 4810 WESTERN AUSTRALIA 525 Abernethy Road, Kewdale 6105 In the interests of product improvement, Ramset reserves the right to alter product specifications as required. Information included in this Product Catalogue is correct at time of printing. It is the responsibility of the user to ensure product selected is appropriate for its intended use. For further technical information go to or contact Ramset on the numbers indicated. ITW Australia Pty. Ltd. ABN trading as Ramset Copyright 2013 Trademarks of Cetram Pty. Ltd. used under license by Ramset FireFix is a trademark of Pirelli Cables. Hilti is a registered trademark of Hilti Corp. KingFlor is a registered trademark of Fielders Steel Roofing Pty. Ltd. CondeckHP is a registered trademark of Stramit Corporation Pty Ltd. Bondek is a registered trademark of BlueScope Steel Limited. Clipsal is a registered trademark of Clipsal Australia Pty. Ltd. Copyright 2010 RAM/DF10/2010 RAMPT0813 Sales, Orders and Enquiries Tel: Fax: Web: enquiry@ramset.com.au

2 Power Tools Product Catalogue

3 Introduction Power Tools Ramset have 35 years of experience and history in concrete drilling and cutting applications dealing, directly with everyday users. Our high performance range includes, DynaDrill Rotary Hammers, Cordless Tools, Carbide, Diamond Drilling Rigs and Accessories, Angle Grinders, Concrete Chaser and Laser Levels

4 Contents Power Tools Selection Guide 4 Cordless Power Tools 18V & 28V 5 Rotary Hammer - 18V Hammer Drill Driver - 18V Angle Grinder - 18V Impact Wrench - 18V Impact Driver - 18V Applicator - 18V Circular Saw - 18V Reciprocating Saw - 18V Torch - 18V Charger & Battery - 18V Rotary Hammer - 28V Hammer Drill Driver - 28V Angle Grinder - 28V Circular Saw - 28V Reciprocating Saw - 28V Torch - 28V Charger & Battery - 28V 18V & 28V Accessories DynaDrill Corded Power Tools 26 DynaDrill Combi Hammer DynaDrill Combi Hammer DynaDrill Combi Hammer DynaDrill Combi Hammer DynaDrill Combi Hammer DynaDrill Combi Hammer DynaDrill Demolition Hammer Accessories - Carbide, Drill Bits, Chisels & Core Bits Diamond Drilling Power Tools 38 Diamond Drilling Motor - RM160 Diamond Drilling Rig - Suits RM160 & RM250 Diamond Drilling Kit - RM160 Kit Diamond Drilling Motor - RM250 Diamond Drilling Motor - RM350 Diamond Drilling Rig - Suits RM250 & RM350 Diamond Core Bits Wet & Dry Vacuum 30L Accessories Cutting & Grinding Power Tools 49 Angle Grinders - 125mm Angle Grinder - 230mm Surface Grinder Wall Chaser Accessories - Diamond Blades and Cut Off Wheels Laser Devices 56 Rotary Lasers Multi-Liner Laser Cross Pointer Laser Cross Beam Laser Distance Meter Accessories

5 Selection Guide Rotary Hammer Which Ramset Rotary Hammer should I use? Concrete Drilling Concrete Demolition Corded DD522 DD529 DD533 DD544 DD565 DD576 DD610 Rated Input (watt) Rated Speed (rpm) Impact Rate (bpm) Impact Energy (joules) Power Source (volt) 240V 240V 240V 240V 240V 240V 240V Weight (kg) Tool Holder SDS Plus SDS Plus SDS Plus SDS Plus SDS Max SDS Max SDS Max Drilling Range (mm) Concrete Optimum Drilling (mm) Drilling Range (mm) Steel up to 13 up to 13 up to 13 up to 13 - Timber (mm) Core Cutting (mm) Chiselling Screwdriving Safety Clutch Double Insulated Sealed Lub. System Variable Speed Reversing Switch Impact Resistant Body Mouldings Adjustable Side Handle Service Light Indicator Electronic Monitoring Electro Pneumatic impact mechanism Quick Fit Chuck Optional Optional Optional Optional Optimum Use 8 Not Recommended Concrete Drilling Cordless CRHR18 CRHR V Battery 28V Battery SDS Plus SDS Plus up to 13 up to

6 Cordless Power Tools Cordless Power Tools

7 Rotary Hammer 18V Cordless Cordless Power Tools SDS-Plus chuck 4 mode setting - drilling, hammer drilling, chiseling & neutral Anti-Vibration System Variable trigger for maximum drilling control High powered servicable motor - 2.7J impact energy The powerful Ramset R18 Lithium Ion cordless rotary hammer delivers the highest performance to weight ratio in it s class. Corded tool performance for a variety of concrete drilling applications. Battery Pack Battery Type No-load Speed Blow Rate (Full-load) Impact Energy Maximum Drill Diameters Concrete Masonry (Using Core Bit) Steel Wood Optimum Drilling Diameter - Concrete Tool Holder Weight incl. Battery 18 V / 3.0 Ah / 4.0 Ah Li-Ion rpm bpm 2.7 J 20 mm 50 mm 13 mm 30 mm 6-14 mm SDS-Plus 3.5 kg Rotary Hammer Part No Order Qty CRHr18 Rotary Hammer* 1 CBASEKITr18 18V Base Kit (2x Batteries CBATR18, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. 1 KIT Builder Plumber Electrician Drilling into Concrete Light Chiseling 4 4 High quality, 18V battery pack delivers superior performance and run time Powerful hammer mechanism delivers 2.7J of impact energy Enhanced anti-vibration system provides maximum operator comfort This versatile tool provides rotary hammer, hammer only and rotation only functions Variable position chisel stop All metal gearbox for durability 2 year warranty Noise / Vibration Information Sound pressure level: 88dB (A) Sound power level: 99dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 12.2m/s 2 drill or 7.4m/s 2 chisel. Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger (CCR18) Carbide Drill Bits, Chisels & Cores

8 Hammer Drill Driver 18V Three Mode Drill All metal single sleeve 13mm/ 1/2 tungsten carbide jaw chuck Built in LED to illuminate workspace 4 pole frameless motor generates high torque Cordless Power Tools Large overmold soft grip handle for increased comfort Belt clip A powerful 18 volt combination tool for high torque drilling, screwdriving and percussion drilling. Battery Pack 18 V / 3.0 Ah / 4.0 Ah Battery Type Li-Ion No Load Speed (1st gear / 2nd gear) / rpm Beats Per Minute (1st gear / 2nd gear) / bpm Max. Drilling Capacity Steel / Wood / Masonry 13 / 38 / 16 mm Torque Settings 24 Max Torque 75 Nm Weight incl. Battery 2.6 kg Hammer Drill Driver Part No Order Qty CHDDR18 Hammer Drill Driver* 1 CBASEKITR18 18V Base Kit (2x Batteries CBATR18, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. 1 KIT Builder Plumber Electrician Carpenter HVAC Timber / Steel Drilling Masonry Drilling Screw Driving pole frameless motor generating a impressive 75Nm of torque Variable speed trigger for enhanced control Percussion drill mode for masonry and stone drilling 24 stage torque adjustment Spindle lock plus keyless chuck - convenient bit change with one hand Large ergonomic soft grip design for comfortable use 2 year warranty Noise / Vibration Information Sound pressure level: 75.5dB (A) Sound power level: 86.5dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 11.6m/s 2. Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger ( CCR18 ) Driver Bits

9 Angle Grinder 18V Cutting & Finishing Tool Cordless Power Tools Three position auxillary handle Convenient paddle switch design for increased operator control and comfort Quick tool free guard adjustment The Ramset R18 Lithium Ion cordless angle grinder is ideal for a variety of finishing jobs on the building site. Battery Pack 18 V / 3.0 Ah / 4.0 Ah Battery Type Li-Ion No Load Speed (1st gear / 2nd gear) 9000 rpm Max Disc Diameter 115 mm Spindle Size M14 Handle Positions 3 Weight incl. Battery 2.4 kg Drill Driver Part No Order Qty CAGR18 Angle Grinder* 1 CBASEKITR18 18V Base Kit (2x Batteries CBATR18, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Consumables Part No. Order Qty CW115SU Cut off wheel steel INOX 115mm 1 CW115S Cut off wheel steel 115mm 1 CW115M Cut off wheel masonry 115mm 1 GW115S Grinding wheel steel 115mm 1 Builder Plumber Electrician HVAC Concrete/Steel Cutting Concrete/Steel Grinding pole frameless motor delivers 9000 rpm Overload protection to protect the motor and the battery Paddle switch design mechanism increases control and comfort Dead man switch increases safety The large spindle lock provides fast and efficient wheel replacement Quick, tool free guard adjustment 2 year warranty Noise / Vibration Information Sound pressure level: 74.5dB (A) Sound power level: 85.5dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 6.1m/s 2. Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger (CCR18)

10 Impact Wrench 18V Heavy Duty Fastening Tool Magnesium gear case for added durability and lighter weight 4 pole frameless motor generating 610Nm torque Forward and reverse switch Large soft grip handle for comfortable use Cordless Power Tools A powerful 18V impact wrench for fast and easy fastening of large construction anchors, such as BraceSet and Boa Coil. Battery Pack Battery Type No Load Speed Impact Rate Drive Shank Square Torque Spindle Ø Weight incl. Battery 18 V / 3.0 Ah / 4.0 Ah Li-Ion rpm ipm ½ Square Drive 610 Nm M kg Impact Wrench Part No Order Qty CIWr18 Impact Wrench* 1 CBASEKITr18 18V Base Kit (2x Batteries CBATR18, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. Setting & Removing Anchors 1 KIT Builder Plumber HVAC Massive 610 Nm of torque Variable speed trigger for enhanced control Large soft grip handle reduces vibration and fatigue Dynamic brake stops unit immediately after switch is released for faster socket changes Magnesium gear case for added durability and lighter weight 2 year warranty Noise / Vibration Information Sound pressure level: 80dB (A) Sound power level: 91dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 11.3m/s 2. Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger (CCR18) Hex Sockets

11 Impact Driver 18V Fixing & Fastening Tool Cordless Power Tools 1/4 hex bit holder Built in LED to illuminate workspace High speed all metal gear and impact mechanism 160Nm torque Forward and reverse switch Soft grip handle for comfortable use Belt clip The Ramset R18 Lithium Ion cordless impact driver is a high speed and high torque tool for fixing and fastening applications. Battery Pack Battery Type No Load Speed Beats Per Minute Bit Retention Torque Weight incl. Battery 18 V / 3.0 Ah / 4.0 Ah Li-Ion rpm ipm ¼ Hex 158Nm 1.8kg Impact Driver Part No Order Qty CIDR18 Impact Driver* 1 CBASEKITR18 18V Base Kit (2x Batteries CBATR18, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. 1 KIT Builder Plumber Electrician Carpenter HVAC Screw Driving pole frameless motor delivers 158Nm of torque ¼ Hex bit holder Variable speed trigger for enhanced control LED lighting for working in dark spaces All metal gear and impact mechanism Large soft grip moulded handle for improved comfort 2 year warranty Noise / Vibration Information Sound pressure level: 78dB (A) Sound power level: 89dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 2.8m/s 2. Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger (CCR18) Driver Bits

12 Applicator 18V Power Supply Ramset proprietary coaxial drive system Six position adjustable control Cordless Power Tools Variable speed trigger Robust metal construction Fits all Ramset chemical anchor cartridges The powerful Ramset R18 Lithium Ion applicator is ideal for effortless dispensing of all Ramset Chemical injection products. 380ml & 750ml cartridge capacity. Reo502, StructaSet 401, ChemSet 801 and ChemSet 101. Battery Pack Battery Type Maximum Dispensing Rate Dispensing Force Cartridge Capacity Weight incl. Battery 18 V / 3.0 Ah Li-Ion 0-533ml/min. 430kg 380ml & 750ml 3.64kg Applicator Part No Order Qty CUAR18 18V Powered Applicator 1 TOOL CR18-CUA 18V Powered Applicator (2x Batteries CBATR18, 1x Charger CCR18, 1 KIT Battery (3.0Ah Lithium Ion - CBATR18) 18V Charger (CCR18) Reo502, StructaSet 401, ChemSet 801 and ChemSet 101 Variable speed trigger for enhanced control Anti-Drip mechanism instantly stops material dripping upon trigger release Six position adjustable speed control Robust, all metal gear system Class leading dispensing performance

13 Circular Saw 18V Timber Trim Saw Cordless Power Tools Electronic motor brake stops saw within seconds Large soft grip handle for comfortable use Lightweight aircraft aluminium shoe Magnesium upper and lower guards for impact resistance The powerful Ramset R18 Lithium Ion circular saw is ideal for cutting and trimming timber on the job site. Battery Pack Battery Type No Load Speed Blade Size Max Cutting Depth Weight incl. Battery 18 V / 3.0 Ah / 4.0 Ah Li-Ion rpm 165mm 90 54mm 45 41mm 4.0kg Circular Saw Part No Order Qty CCSR18 Circular Saw* 1 CBASEKITR18 18V Base Kit (2x Batteries CBATR18, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. Builder Carpenter Formworker Cutting Timber Noise / Vibration Information Sound pressure level: 91dB (A) Sound power level: 102dB (A) 1 KIT Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger (CCR18) The powerful 3500 rpm motor delivers fast, clean cuts in a variety of timbers Large ergonomic soft grip handle for comfortable use All magnesium upper and lower guards for impact resistance Compact, light and well balanced Excellent visibility of cutting line Light weight aircraft aluminium shoe Electronic motor brake, saw stops within seconds Spindle lock 2 year warranty Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 2.5m/s

14 Reciprocating Saw 18V Timber & Steel Cutting Heavy duty blades available for timber or steel Gear protecting clutch absorbs impact forces from blade jams Counter balance mechanism to reduce vibration and provide smooth cutting Cordless Power Tools Extendable shoe for full blade use The Ramset R18 Lithium Ion reciprocating saw offers cordless cutting convenience for a host of applications for tradesmen and maintenance workers.the saw is designed for maximum power, operator comfort and convenience. Battery Pack Battery Type Stroke Rate No Load Speed Stroke Length Weight incl. Battery Wear Eye and Ear Protection 18 V / 3.0 Ah / 4.0 Ah Li-Ion spm 25 mm 3.6 kg Reciprocating Saw Part No Order Qty CRSR18 Reciprocating Saw* 1 CBASEKITR18 18V Base Kit (2x Batteries CBATR18, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. 1 KIT Builder Plumber Electrician Carpenter HVAC Cutting Timber Cutting Steel Best in class 18V performance Compact lighter weight allows the user to work longer without fatigue Quick-shoe adjustment for efficient use of blade and cutting depth Quick release blade clamp for fast and easy blade changes without any key Comfortable two finger variable speed trigger Gear protection system - protects the gear box in case of blade lock-ups Low vibration due to counter balance mechanism 2 year warranty Noise / Vibration Information Sound pressure level: 80.5dB (A) Sound power level: 91.5dB (A) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 23.7m/s 2. Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger (CCR18)

15 Torch 18V Heavy Duty Jobsite Light Cordless Power Tools 135 Swivel head Large soft grip for maximum comfort Poweful 3.0Ah Li-Ion battery provides up to 5 hours lighting Versatile work light for job site illumination. Battery Pack Battery Type Weight incl. Battery 18 V / 3.0 Ah / 4.0Ah Li-Ion 1.1 kg Torch Part No Order Qty CTR18 Torch* 1 *Can be purchased as bare unit or as part of a kit. 135 swivel head provides floor to ceiling illumination. Soft grip for maximum comfort and control 2 year warranty Battery (3.0Ah Lithium Ion - CBATR18) (4.0Ah Lithium Ion - CBATR18HD) Charger (CCR18)

16 Charger & Battery 18V Power Supply LED charge indication Heavy duty construction withstands 2 metre drop Slide rail ensures secure conection to the tool Cordless Power Tools Easy to operate release latches Rubberized feet keeps in place on slick surfaces 3.0 Ah Lithium-Ion Battery 18V charger. Battery Pack Battery Type Charger Power Supply Weight (Battery) Weight (Charger) 18 V / 3.0 Ah / 4.0 Ah Li-Ion 240 V 0.68 Kg 0.66 Kg Charger & Battery Part No Order Qty CBATR18 18V 3.0Ah Battery 1 CCR18 18V / 28V Multi Voltage 1 Charger Batteries and charger can be purchased as individual items or as part of a base kit. Battery fuel gauge LED s light-up showing how much charge is left Heavy duty construction withstands up to a 2 metre drop Consistent Fade Free power throughout the discharge cycle Generator and inverter ready design Encapsulated circuit board protects charger from debris, moisture and impacts High visibility, 360 degree LED indicates charge status Design protects battery during charge cycle, prevents tipping and is wall mountable 45 minute charge time Durable non slip rubber footprint prevents slipping and protect against impacts 2 year warranty 18V Tool Range

17 18V Base Kit Cordless Power Tools Cordless Power Tools Base kit includes: 1 x Charger (CCR18), 2 x 18V Batteries (CBATR18), 1 x 18V Torch (CTR18) and 1 x Kit Bag (CKITBAG) Add any number of bare unit tools to the Base Kit to suit your trade requirements. 18V cordless range base tool kit. Add tools to this base kit. Battery Pack Battery Type 18V Base Kit 18 V / 3.0 Ah / 4.0 Ah Li-Ion Part No Order Qty CBASEKITR18 18V Base Kit (2x Batteries CBATR18 or CBATR18HD, 1x Charger CCR18, 1x Torch CTR18, 1x Bag CKITBAG) 1 KIT Items can also be purchased individually. 2 Year Warranty Every Ramset 18 Volt Lithium-Ion power tool (including battery charger) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, Ramset will repair or replace any part on a 18 Volt Lithium-Ion power tool which, after examination, is determined by Ramset to be defective in material or workmanship for a period of two (2) years* after the date of purchase. Return the 18 Volt Lithium-Ion power tool and a copy of proof of purchase to the Ramset National Service Centre, freight prepaid and insured, as requested for this warranty to be effective. This warranty does not apply to damage that Ramset determines to be from repairs made or attempted by anyone other than Ramset authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. *The warranty period for Li-Ion battery packs is two (2) years from the date of purchase. Our goods come with guarantees that cannot be excluded under the Australian and New Zealand Consumer Laws. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure

18 Rotary Hammer 28V Four Mode Hammer SDS-Plus chuck with quick change system for 3 jaw chuck 4 mode setting - drilling, hammer drilling, chiseling & neutral Variable trigger for maximum drilling control Cordless Power Tools 28V delivers high powered 3.2J impact of energy Powerful Ramset 28V cordless rotary hammer delivers corded tool performance for a variety of concrete drilling applications. Battery Pack 28 V / 3.0 Ah Battery Type Li-Ion No-load Speed rpm Blow Rate (Full-load) bpm Impact Energy 3.2 J Maximum Drill Diameters Concrete 26 mm Masonry (Using Core Bit) 68 mm Steel 13 mm Wood 30 mm Optimum Drilling Diameter - Concrete 8-16 mm Tool Holder SDS-Plus Weight incl. Battery 4.5 kg Rotary Hammer Part No Order Qty CRHR28 Rotary Hammer* 1 CBASEKITR28 18V Base Kit (2x Batteries CBATR28, 1x Charger CCR28, 1x Torch CTR28, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. 1 KIT Builder Plumber Electrician Drilling into Concrete Light Chiseling 4 4 High quality, large capacity 28V battery pack for fade free energy transfer and enhanced performance L-shape construction for perfect balance and control 4 mode - drilling, hammerdrilling, chiselling and neutral index All metal gearbox for durability High speed / maximum impact energy with safety clutch Block construction for exact seating of bearings and maximum robustness 2 year warranty Noise / Vibration Information Sound pressure level: 94dB (A) Sound power level: 105dB (A) Battery (3.0Ah Lithium Ion - CBATR28) Charger (CCR28) Carbide Drill Bits, Chisels & Cores

19 Hammer Drill Driver 28V Three Mode Drill Cordless Power Tools All metal single sleeve 13mm/ 1/2 tungsten carbide jaw chuck Built in LED illuminates workspace Extra long auxillary handle for increased control in high torque drilling applications 4 pole frameless motor delivers 85Nm of torque Large soft grip handle for increased comfort and reduced vibration A powerful 28V combination tool for high torque drilling, screwdriving and percussion drilling. Battery Pack 28 V / 3.0 Ah Battery Type Li-Ion No Load Speed (1st gear / 2nd gear) / rpm Beats Per Minute (1st gear / 2nd gear) / bpm Max. Drilling Capacity Steel / Wood / Masonry 13 / 32 / 16 mm Torque Settings 24 Max. Torque 85 Nm Weight incl. Battery 3.1 kg Hammer Drill Driver Part No Order Qty CHDDR28 Hammer Drill Driver* 1 CBASEKITR28 18V Base Kit (2x Batteries CBATR28, 1x Charger CCR28, 1x Torch CTR28, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. Builder Plumber Electrician Carpenter 1 KIT HVAC Timber / Steel Drilling Masonry Drilling Screw Driving Impressive 85 Nm of torque Variable speed trigger for enhanced control All metal planetary gears for durability and high torque performance Convenient percussion drill mode for masonry and stone drilling 24 stage torque adjustment Spindle lock plus keyless chuck - convenient bit change with one hand Ergonomic soft grip design for comfortable use 2 year warranty Noise / Vibration Information Sound pressure level: 90.5dB (A) Sound power level: 101.5dB (A) Battery (3.0Ah Lithium Ion - CBATR28) Charger (CCR28) Driver Bits Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 12.3m/s

20 Angle Grinder 28V Cutting & Finishing Tool Two position auxillary handle Cordless Power Tools Quick tool free guard adjustment The Ramset R28 Lithium Ion cordless angle grinder is ideal for a variety of finishing jobs on the building site. Battery Pack 28 V / 3.0 Ah Battery Type Li-Ion No Load Speed 9000 rpm Max Disc Diameter 115 mm Spindle Size M14 Handle Positions 2 Weight incl. Battery 3.0 kg Drill Driver Part No Order Qty CAGR28 Angle Grinder* 1 CBASEKITR28 18V Base Kit (2x Batteries CBATR28, 1x Charger CCR28, 1x Torch CTR28, 1x Bag CKITBAG) 1 KIT *Can be purchased as bare unit or as part of a kit. Consumables Part No. Order Qty CW115SU Cut off wheel steel INOX 115mm 1 CW115S Cut off wheel steel 115mm 1 CW115M Cut off wheel masonry 115mm 1 GW115S Grinding wheel steel 115mm 1 Builder Plumber Electrician HVAC Timber / Steel drilling Screw Driving The tough 9000 rpm motor powers through cutting applications without slowing down The battery lock out system prevents unintentional start ups Fixtec spindle change system allows for a quick changing of cutting wheel Ergonomic softgrip design for comfortable use 2 year warranty Noise / Vibration Information Sound pressure level: 79dB (A) Sound power level: 90dB (A) Battery (3.0Ah Lithium Ion - CBATR28) Charger (CCR28) Driver Bits Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 5.5m/s

21 Circular Saw 28V Timber Trim Saw Cordless Power Tools Electronic motor brake stops saw within seconds Soft grip handle for comfortable use Lightweight aircraft aluminium shoe All metal upper and lower guards for impact resistance Powerful 28 Volt circular saw ideal for cutting and trimming timber on the job site. Battery Pack Battery Type No Load Speed Blade Size Max Cutting Depth Weight incl. Battery 28 V / 3.0 Ah Li-Ion rpm 165mm 90 54mm 45 41mm 4.5kg Circular Saw Part No Order Qty CCSR28 Circular Saw* 1 CBASEKITR28 18V Base Kit (2x Batteries CBATR28, 1x Charger CCR28, 1x Torch CTR28, 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. 1 KIT Builder Carpenter Formworker Cutting Timber V Li-Ion technology with 3.0Ah for longer runtime Ergonomic soft grip handle for comfortable use All metal upper and lower guards for impact resistance Excellent visibility of cutting line Light weight aircraft aluminium shoe Electronic motor brake, saw stops within seconds Spindle lock 2 year warranty Noise / Vibration Information Sound pressure level: 91dB (A) Sound power level: 102dB (A) Battery (3.0Ah Lithium Ion - CBATR28) Charger (CCR28) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 2.5m/s

22 Reciprocating Saw 28V Timber & Steel Cutting Heavy duty blades available for timber or steel Quick blade release mechanism Powerful, all metal heavy duty motor Cordless Power Tools Extendable shoe for full blade use The Ramset R28 Lithium Ion reciprocating saw offers cordless cutting convenience for a host of applications for tradesmen and maintenance workers.the saw is designed for maximum power, operator comfort and convenience. Battery Pack Battery Type Stroke Rate No Load Speed Stroke Length Weight incl. Battery Wear Eye and Ear Protection 28 V / 3.0 Ah Li-Ion rpm 29 mm 4.1 kg Reciprocating Saw Part No Order Qty CRSr28 Reciprocating Saw* 1 CBASEKITr28 18V Base Kit (2x Batteries CBATR28, 1x Charger CCR28, 1x Torch CTR28 1x Bag CKITBAG) *Can be purchased as bare unit or as part of a kit. 1 KIT Builder Plumber Electrician Carpenter HVAC Cutting Timber Cutting Steel Powerful 28V tool delivers 3000 strokes per minute for heavy duty cutting application Lighter weight allows the user to work longer without fatigue Quick-shoe adjustment for efficient use of blade and cutting depth Quick release blade clamp for fast and easy blade changes without any key Comfortable two finger variable speed trigger Gear protection system - protects the gear box in case of blade lock-ups Low vibration due to Heavy-Duty wobble plate drive 2 year warranty Noise / Vibration Information Sound pressure level: 83dB (A) Sound power level: 94dB (A) Battery (3.0Ah Lithium Ion - CBATR28) Charger (CCR28) Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 16.8m/s

23 Torch 28V Heavy Duty Jobsite Light Cordless Power Tools 135 Swivel head Soft grip for maximum comfort Poweful 3.0Ah Li-Ion battery Versatile work light for job site illumination. Battery Pack Battery Type Weight Including Battery 28 V / 3.0 Ah Li-Ion 1.4 Kg Torch Part No Order Qty CTr28 Torch* 1 *Can be purchased as bare unit or as part of a kit. 135 swivel head provides floor to ceiling illumination Large soft grip for maximum comfort and control 2 year warranty (see page 22) Battery (3.0Ah Lithium Ion - CBATR28) Charger (CCR28)

24 Charger & Battery 28V Power Supply LED charge indication Heavy duty construction withstands 2 metre drop Slide rail ensures secure conection to the tool Cordless Power Tools Easy to operate release latches Rubberized feet keeps in place on slick surfaces 3.0 Ah Lithium-Ion Battery 28V charger. Battery Pack Battery Type Charger Power Supply Weight (Battery) Weight (Charger) 28 V / 3.0 Ah Li-Ion 240 V 1.0 Kg 0.85 Kg Charger & Battery Part No Order Qty CBATR28 28V 3.0Ah Battery 1 CCR28 28V Charger 1 Batteries and charger can be purchased as individual items or as part of a base kit. Battery fuel gauge LED s light-up showing how much charge is left Heavy duty construction withstands up to a 2 metre drop Consistent Fade Free power throughout the discharge cycle Generator and inverter ready design Encapsulated circuit board protects charger from debris, moisture and impacts High visibility, 360 LED indicates charge status Design protects battery during charge cycle, prevents tipping and is wall mountable 45 minute charge time Durable non slip rubber footprint prevents slipping and protect against impacts 2 year warranty (see page 22) 18V Tool Range

25 28V Base Kit Cordless Power Tools Cordless Power Tools Base kit includes: 1 x Charger (CCR28), 2 x 18V Batteries (CBATR28), 1 x 18V Torch (CTR28) and 1 x Kit Bag (CKITBAG) Add any number of bare unit tools to the Base Kit to suit your trade requirements. 28V cordless range base tool kit. Add tools to this base kit. Battery Pack Battery Type 18V Base Kit 28 V / 3.0 Ah Li-Ion Part No Order Qty CBASEKITR28 18V Base Kit (2x Batteries CBATR28, 1x Charger CCR28, 1x Torch CTR28, 1x Bag CKITBAG) 1 KIT Items can also be purchased individually. 2 Year Warranty Every Ramset 28 Volt Lithium-Ion power tool (including battery charger) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, Ramset will repair or replace any part on a 28 Volt Lithium-Ion power tool which, after examination, is determined by Ramset to be defective in material or workmanship for a period of two (2) years* after the date of purchase. Return the 28 Volt Lithium-Ion power tool and a copy of proof of purchase to the Ramset National Service Centre, freight prepaid and insured, as requested for this warranty to be effective. This warranty does not apply to damage that Ramset determines to be from repairs made or attempted by anyone other than Ramset authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. *The warranty period for Li-Ion battery packs is two (2) years from the date of purchase. Our goods come with guarantees that cannot be excluded under the Australian and New Zealand Consumer Laws. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure

26 Accessories Power Tools Phillips Head Driver Bits Part No. Driver Type Order Qty HDPH02025 #2 PH x 25 mm 10 HDPH02050 #2 PH x 50 mm 10 HDPH02100 #2 PH x 100 mm 10 Hex Driver Bits Part No. Driver Type Order Qty HDUN05065 Hex Drv. Mag 5/16 x 65 mm 10 Cordless Power Tools Hex Sockets Part No. Driver Type Order Qty IS mm Socket 1 IS mm Socket 1 IS mm Socket 1 IS mm Socket 1 IS mm Socket 1 IS mm Socket 1 IS mm Socket 1 ISD mm Long Socket 1 ISD mm Long Socket 1 ISD mm Long Socket 1 ISD mm Long Socket 1 ISD mm Long Socket 1 ISD mm Long Socket 1 ISD mm Long Socket SDS - ½ Drive Socket Adaptor 1 Cut Off & Grinding Wheels Part No. Order Qty CW100SU Cut off wheel steel INOX 102mm 1 CW115SU Cut off wheel steel INOX 115mm 1 CW125SU Cut off wheel steel INOX 125mm 1 CW100S Cut off wheel steel 102mm 1 CW115S Cut off wheel steel 115mm 1 CW125S Cut off wheel steel 125mm 1 CW230S Cut off wheel steel 230mm 1 CW355S Cut off wheel steel 355mm 1 CW100M Cut off wheel masonry 102mm 1 CW115M Cut off wheel masonry 115mm 1 CW125M Cut off wheel masonry 125mm 1 CW180M Cut off wheel masonry 180mm 1 CW230M Cut off wheel masonry 230mm 1 GW100S Grinding wheel steel 100mm 1 GW115S Grinding wheel steel 115mm 1 GW125S Grinding wheel steel 125mm 1 GW180S Grinding wheel steel 180mm 1 GW230S Grinding wheel steel 230mm

27 DynaDrill Corded Power Tools DynaDrill Corded Power Tools

28 DynaDrill 522 2kg Combi Hammer 4 mode setting - drilling, hammering, chiseling & neutral 790W Motor Soft grip handle for comfortable control DynaDrill Corded Power Tools The Ramset DynaDrill 522 Combi Hammer is the ideal tool choice for all those common drilling applications whether into concrete, timber or steel. Voltage 240V Power Input 790w Rated Speed rpm Impact Rate bpm Impact Force (Max) 2.7J Maximum Drill Diameters Concrete 24 mm Masonary (using Core Bit) 68 mm Steel 13 mm Wood 30 mm Optimum Drilling Size in Concrete 6-14 mm Weight 2.8Kg Tool Holder SDS-Plus DynaDrill 522 Part No. Order Qty DD522 2kg Electro Pneumatic Hammer 1 NEW 790W Motor 2.7 Joules of impact energy Block construction. Reliable and durable housing Forward and reverse rotation Depth gauge Chisel function Rotating brush plate for equal power in forward and reverse mode Builder Plumber Electirician Drilling into concrete Removing Tiles (light chiseling) 4 4 Core Cutting Noise / Vibration Information Sound pressure level: 91dB (A) Sound power level: 102dB (A) Carbide Drill Bits, Chisels and Cores Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 17m/s 2 or 13m/s 2 chisel

29 DynaDrill 529 2kg Combi Hammer DynaDrill Corded Power Tools Quick release exchangeable chuck system. Additional 3 jaw keyless chuck available as accessory (Part #054288) 4 mode setting - drilling, hammering, chiseling & neutral Powerful 850W Motor Reverse switch. Same power in forward and reverse The Ramset DynaDrill 529 Combi Hammer is truly the class leasing 2kg tool on the market. The tool of choice with its powerful motor, enhanced anti vibration and the versatility of the quick change chuck system. Voltage 240V Power Input 850w Rated Speed rpm Impact Rate bpm Impact Force (Max) 3.2J Maximum Drill Diameters Concrete 28mm Masonary (using Core Bit) 68mm Steel 13mm Wood 30mm Optimum Drilling Size in Concrete 8-16mm Weight 3.1Kg Tool Holder SDS Plus DynaDrill 529 Part No. Order Qty DD529 2kg Electro Pneumatic Hammer 1 Builder Plumber Electirician Drilling into concrete Removing Tiles (light chiseling) 4 4 Core Cutting NEW Powerful 850W Motor Class leading drilling rates and chisel performance Substantially improved vibration reduction Rotating brush plate for same power in forward or reverse mode Rotation stop for chiselling Quick change chuck system Noise / Vibration Information Sound pressure level: 91dB (A) Sound power level: 102dB (A) 3 Jaw Keyless Chuck (054288) Carbide Drill Bits, Chisels and Cores Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 11m/s 2 drill

30 DynaDrill 533 3kg Combi Hammer Quick release exchangeable chuck system. Additional 3 jaw keyless chuck available as accessory (Part #054288) 4 mode setting - drilling, hammering, chiseling & neutral Vibration dampening mechanism Compact and well balanced D-Shape design DynaDrill Corded Power Tools RVC RAMSET VIBRATION CONTROL Powerful 800W Motor The Ramset DynaDrill 533 sets new standards for a 3kg combi hammer.. Its ergonomic drop motor design gives the tool a more balance feel and delivers the additional performance when stepping up from a 2kg tool. Voltage 240V Power Input 800w Rated Speed 0-900rpm Impact Rate bpm Impact Force (Max) 3.5J Maximum Drill Diameters Concrete 28mm Masonary (using Core Bit) 82mm Steel 13mm Wood 30mm Optimum Drilling Size in Concrete 12-18mm Chiseling Positions Weight 3.6kg Tool Holder SDS-Plus NEW Powerful 800W Motor Class leading drilling and chiseling performance Low vibration due to the Ramset vibration control system Balanced weight distribution as a result of the L shaped design Quick change chuck system Rotation stop for chiselling DynaDrill 533 Part No. Order Qty DD533 3kg Electro Pneumatic Hammer 1 Noise / Vibration Information Builder Plumber Electirician Drilling into concrete Removing Tiles (light chiseling) 4 4 Core Cutting Sound pressure level: Sound power level: 91dB (A) 102dB (A) 3 Jaw Keyless Chuck (054288) Carbide Drill Bits, Chisels & Cores Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 12m/s 2 or 11m/s 2 chisel

31 DynaDrill 544 4kg Combi Hammer DynaDrill Corded Power Tools Quick release SDS drive tool holder. Additional 3 jaw keyless chuck available as accessory (Part No ) 180 auxillary handle adjustment for left and right handed use Vibration dampening mechanism Soft grip handle for comfortable use RVC RAMSET VIBRATION CONTROL Powerful 900w motor The Ramset DynaDrill 544 is a class leading 4kg combi hammer drill in terms of performance and vibration reduction mechanisms. A robust and ergonomic design makes it the ideal tool for volume drilling in concrete, light picking and chiselling. Voltage 240V Power Input 900w Rated Speed 0-760rpm Impact Rate bpm Impact Force (Max) 5.0J Maximum Drill Diameters Concrete 32mm Masonary (using Core Bit) 90mm Steel 13mm Wood 30mm Optimum Drilling Size in Concrete 14-25mm Chiselling Positions 12 Weight 4.7Kg Tool Holder SDS Plus DynaDrill 544 Part No. Order Qty DD544 4kg Electro Pneumatic Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete Removing Tiles (light chiseling) 4 4 Core Cutting Vibration damping mechanism for super smooth operation Quick lock keyless bit exchange Reverse switch Electro pneumatic impact mechanism In-built safety clutch providing operator protection should a drill bit jam. Soft grip, back and side handle for safe and fatigue free operations Finger tip control for point start accuracy with variable speed adjustment Sealed lubrication system for extended service intervals Noise / Vibration Information Sound pressure level: 93dB (A) Sound power level: 104dB (A) 3 Jaw Keyless Chuck (054288) Carbide Drill Bits, Chisels & Cores Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 10m/s 2 drill or 9m/s 2 chisel

32 DynaDrill 565 5kg Combi Hammer Improved impact mechanism excellent transfer of energy to the drill bit or chisel Vibration dampening mechanism Variable speed trigger DynaDrill Corded Power Tools The Ramset DynaDrill 565 Rotary Hammer is a versatile multiple use rotary hammer designed to get through the toughest job with ease. The DD565 incorporates many new innovative features that make it the ideal tool for those who want consistent hard work from a tool that can take it. Voltage 240V Power Input 1,100w Rated Speed 0-400rpm Impact Rate bpm Impact Force (Max) 10.0J Maximum Drill Diameters Concrete 40 mm Masonary (using Core Bit) 125 mm Optimum Drilling Size in Concrete 18-38mm Chiselling Positions 16 Weight 5.9Kg Tool Holder R3 Max Cable Length 4m DynaDrill 565 Part No. Order Qty DD565 5kg Electro Pneumatic Combi Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete Removing Tiles (light chiseling) 4 4 Core Cutting Robust design and oil lubrication, guarantees the longest tool lifetime, even under the toughest working conditions Ergonomically designed and well balanced High removal rates, excellent performance / weight ratio Safety clutch system allows continuous drilling even when the drill bit jams in the toughest materials Horizontal and vertical drilling level gauge for accurate drilling Vibration reduction system for comfort while working Power LED indicator Service LED indicator shows 8 hours before tool requires service Rotary and Hammer / Hammer only selector built into casing Noise / Vibration Information Sound pressure level: 98dB (A) Sound power level: 109dB (A) Carbide Drill Bits, Chisels & Cores Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 8.8m/s

33 DynaDrill 576 7kg Demolition Hammer DynaDrill Corded Power Tools 15 Joules of impact force Safety clutch mechanism Powerful 1350watt motor The Ramset DynaDrill 576 electro pneumatic combi hammer, is designed for large diameter drilling, picking and chiselling in concrete. Voltage 240V Power Input 1,350W Rated Speed 0-280rpm Impact Rate 0-2,800bpm Impact Force (Max) 15J Maximum Drill Diameters Concrete 45 mm Masonary (using Core Bit) 150 mm Optimum Drilling Size in Concrete 24-40mm Machine Weight 7.9kg Chiselling Positions 12 Tool Holder R3 Max Cable Length 4m DynaDrill 576 Part No. Order Qty DD576 7kg Electro Pneumatic Combi Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Drilling into concrete Removing Tiles (light chiseling) 4 4 Core Cutting Powerful and robust hammer for large diameter holes or concrete breaking Tool holder adjustment - 12 positions Safety clutch Optimum ergonomics Rotary and Hammer / Hammer only selector built into casing 15J of impact force Noise / Vibration Information Sound pressure level: 97dB (A) Sound power level: 110dB (A) R3 Max Carbide Drill Bits, Chisels & Cores Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 9m/s

34 DynaDrill kg Combi Hammer Vibration dampening mechanism DynaDrill Corded Power Tools 25J of impact force 360 rotary auxillary handle suitable for left or right hand use Powerful 1500w motor The Ramset DynaDrill 610 is a strong and robust demolition hammer. It s compact design with a high power to weight ratio, makes it ideal for large concrete demolition jobs. Voltage 240V Power Input 1,500w Impact Rate 950-1,890bpm Impact Force (Max) 6-25J Chiselling Positions 12 Weight 9.9Kg Tool Holder R3 Max Cable Length 4m DynaDrill 610 Part No. Order Qty DD610 10kg Demolition Hammer 1 Kit includes: Shock proof case, lubricating oil and instruction manual Builder Plumber Electirician Concrete Breaking High-performance and power make this demolition hammer one of the highest performing hammers of its kind on the market Impact force adjustable through 6 levels to match base material and application Multi position tool holder Fixed position power switch Noise / Vibration Information Sound power level: 108dB (A) R3 Max Chisels Wear ear and eye protection. Vibration: The typical weighted acceleration does not exceed 13m/s

35 Accessories Carbide, Drill Bits & Chisels UNIQUE DESIGN UNIVERSAL APPLICATION ULTIMATE PERFORMANCE Undulating tip design* Reduce contact line Extreme drilling progress Extra-long centering cutting edge* Improved durability Fully embedded cutting element High strength durable head Comfortable smooth drilling Two-point centering* Optimum drilling performance Two-point centering with recess Clear wear marking Accurate drill hole diameter Extreme drilling progress Extremely high service life Curved cutting edge* Wide carbide blades Extremely high service life U3 Ulitmate (Tri-Cutter) Carbide Drill Bits Part No. Diameter Work Length Total Length Use with Use with Use with Use with Use with Use with (mm/inch) (mm) (mm) DD522 DD529 DD533 DD544 CRHR18 CRHR28 DDU u u u 8 u u DDU u u u 8 u u DDU u u u 4 u DDU u u u 4 u DDU u u u 4 u DDU306050X3 1/4" u u u 4 u DDU306100X3 1/4" u u u 4 u DDU306150X3 1/4" u u u 4 u DDU u u 4 4 DDU u u 4 4 DDU u u 4 4 DDU u u 4 4 DDU u 4 4 DDU u 4 4 DDU u 4 4 DDU DDU u u 4 3 Optimum Use u Outside Optimum 8 Not Recommended

36 Accessories Carbide, Chisels & Core Bits R3 PLUS patented carbide drill bits are the perfect match for your Ramset DynaDrill or cordless rotary hammer. Together, they form a powerful concrete drilling system to get the job done faster. R3 PLUS carbide comprises tough tungsten carbide head design and 4 spiral flutes for faster waste removal and drilling speed. R3 PLUS Carbide and Chisels fit all SDS Plus machines. R3 PLUS carbide drill bits are also available with 4 cutter heads for greater performance and drilling accuracy. Standard (2 Cutter) Carbide Drill Bits Part No. Diameter (mm/inch) Work Length (mm) Total Length (mm) Use with DD522 Use with DD529 Use with DD533 Use with DD544 Use with CRHR18 Use with CRHR28 DDR u u u 8 u u DDR u u u 8 u u DDR305065X u u u 8 u u DDR305125X u u u 8 u u DDR u u u 4 u DDR u u u 4 u DDR u u u 4 u DDR306050X3 1/ u u u 4 u DDR306100X3 1/ u u u 4 u DDR306150X3 1/ u u u 4 u DDR u u u 4 u DDR u u 4 4 DDR u u 4 4 DDR u u 4 4 DDR u u 4 4 DDR u u 4 4 DDR u 4 4 DDR u 4 4 DDR u 4 4 DDR312125X7 1/ u 4 4 DDR DDR u u 4 DDR u u 4 DDR u u 4 DDR u u 4 3 Optimum Use u Outside Optimum 8 Not Recommended DynaDrill Corded Power Tools Carbide Drill Bits (Y Cutter) Part No. Diameter (mm/inch) Work Length (mm) Total Length (mm) Use with DD522 Use with DD529 Use with DD533 Use with DD544 Use with CRHR18 Use with CRHR28 DQR u u 4 DQR u u 4 DQR u u 4 4 u u DQR u u 4 4 u u DQR u u u 4 u u DQR u u u 4 u u DQR u u u 4 u u DQR u u u 4 8 u DQR u u u 4 8 u DQR u u u 4 8 u DQR u u u 4 8 u DQR u u 4 8 u DQR u u u 8 u DQR u u u 8 u 3 Optimum Use u Outside Optimum 8 Not Recommended

37 Accessories Carbide, Chisels & Core Bits DynaDrill Corded Power Tools Part No. Type Width (mm) Total Length (mm) Use with DD522 Use with DD529 Use with DD533 Use with DD544 DHR3PCS Point DHR3FCS Flat DHR3SC040 Spade Optimum Use Chisels U3 Ulitmate (Tri-Cutter) Carbide Drill Bits Part No. Diameter (mm) Work Length (mm) Total Length (mm) Use with DD565 Use with DD576 DDUM u DDUM u DDUM u DDUM u DYUM u DYUM u 4 Optimum Use u Outside Optimum 8 Not Recommended Carbide Drill Bits (Y-Cutter) R3 MAX Carbide Drill Bits and Chisels are tough, long-life and designed to also fit all SDS Max machines. R3 MAX Drill Bits have precision engineered cutting and cleaning flutes for efficient and trouble free drilling providing a long life solution. *Larger sizes above 16mm diameter have 4 tungsten carbide cutter heads for efficient heavy duty drilling and long life operation. Part No. Diameter (mm) Work Length (mm) Total Length (mm) Use with DD565 Use with DD576 DDYM u DDYM u DDYM u DDYM u DDYM u DDYM u DDYM u DDYM u DDYM u DDYM DDYM DDYM DDYM DDYM DDYM DDYM DDYM DDYM DDYM DDYM DDYM DDYM u 4 3 Optimum Use u Outside Optimum 8 Not Recommended

38 Accessories Carbide, Chisels & Core Bits Chisels Part No. Type Width (mm) Total Length (mm) Use with DD565 Use with DD576 Use with DD610 DHSMPCS Point DHSMPCM Point DHSMPCL Point DHSMFCS Flat DHSMFCM Flat DHSMFCL Flat DHSMSC050 Spade DHSMSC080 Spade DHSMSC115 Spade Optimum Use DynaDrill Corded Power Tools Core Bit System Part No. DDHR12150 DCHR050 DCHR065 DCHR080 DCHR100 DAHR25280 DAR3HR DASMHR DASMR3 12mm Pilot bit 50mm Core bit 65mm Core bit 80mm Core bit 100mm Core bit 250mm Extension R3 Plus Drive Adaptor R3 Max Drive Adaptor SDS Max Drive Adaptor to SDS Plus For large diameter concrete hole drilling. From 50mm to 100mm hole diameter. Suits both R3 PLUS and R3 Max drive systems

39 Diamond Drilling Power Tools

40 Drilling Motor RM w ½ BSP & 1¼ UNC Connection Water connection 3 speed selector Powerful 2000w motor Diamond Drilling Power Tools A comfortable yet powerful diamond core drill with superb power to weight ratio that can be hand operated or mounted on a rig. Voltage 240w Power Input 2000w Connection ½ BSP and 1¼ UNC Motor Speeds Speed 1 Speed 2 Speed 3 Load 0-660rpm rpm rpm Diameter mm 35-60mm 10-30mm Rig Compatibility TRIX160 Cable Length 5m Weight 5.9kg Diamond Motor RM160 Part No. Order Qty RM160 Ramset Diamond Motor 1 Accessories Copper Rings Core Bit Extension ½ x 300Mm Core Bit Extension 1-¼ x 400Mm Portable Water Supply Unit 1 Refer to Page 40 for the full range of core bits Plumber Electirician HVAC Concrete Coring Integrated friction clutch for highest level of safety Compact & ergonomic Optimal power / speed balance for maximum core drill life Integrated spirit levels for efficient and precise machine adjustment LED indicator for overpressure Noise / Vibration Information Sound pressure level: Sound power level: Wear ear and eye protection Drilling Rig Diamond Cores Wet and Dry Vacuums 85dB (A) 90dB (A)

41 Drilling Rig Suits RM160 & RM250 Motors Diamond Drilling Power Tools Adjustable angle Neck mount connection Integrated vacuum plate A lightweight and easy to handle rig that is capable of very accurate coring from 0 to 90. The trolley system is fitted with rollers to ensure smooth even work in the worst conditions. Height 880mm Length 340mm Width 250mm Weight 12Kg Max Drill Depth 850mm Max Core Diameter 200mm Operational Tilt 0-90 Motor Mounting 60mm connection neck mount Suitable for Motors RM160 & RM250 Diamond Rig TRIX160 Part No. Order Qty TRIX160 Rig to suit RM160 motor 1 Accessories SDP1 Vacuum Pump 200W Quick Release Connector Bolts Vacuum Set Small Water Collector Membranes For Water Collector Portable Water Supply Unit Sharpening Plate 1 Robust rig that enables more stable and controlled drilling Integrated vacuum plate Increased life of core bits Reduces drilling vibration Drilling Motors Wet and Dry Vacuums Diamond Cores

42 Drilling Kit RM160 Kit Diamond Drilling Power Tools A fully integrated diamond core drilling system supplied complete with drilling motor, drilling rig and connection systems. Entire kit is supplied in a robust double walled drilling case. Diamond Drilling Kit RM160KIT Part No Order Qty RM160 Ramset Drilling Motor 2000w 1 TRIX160 Drilling Rig 1 Accessories Copper rings 1 Diamond Carbide Tipped Drill bit 1 Diamond sharpening stone 1 DynaSet punch 1 Spanner set 1 Grease 1 Quick release connector bolts 1 Water connector 1 Powerful 2000w drilling motor that can be held or rig mounted Robust drilling rig suitable for drilling up to 200mm diameter Robust rotomolded plastic and stainless steel drilling case Solid recessed wheels for ease of transportation to and from the jobsite Integrated transport and carrying handles Molded lid enables nesting of multiple cases to prevent sliding during transport. Diamond Cores Wet & Dry Vacuum

43 Drilling Motor RM w Diamond Drilling Power Tools Powerful 2500w motor 2 speed selector Double shank 1 ¼ UNC & ½ BSP connection The RM250 is a high performance drilling machine designed for use in conjunction with a drilling rig. A 2 speed motor with a maximum drilling diameter of 250mm makes it the ideal machine for a range of coring applications on the construction site. Voltage 240V Power Input 2500w Connection ½ BSP & 1¼ UNC Max Drilling Capacity Rig Mounted 250mm Motor Speeds Speed 1 Speed 2 Load 360rpm 850rpm Diameter mm mm Rig Compatibility TRIX160 & TRIX350 Cable Length 3m Insulation Class II Weight 11Kg Diamond Motor RM250 Part No. Order Qty RM250 Diamond Drilling Motor 1 Accessories Core Bit Extension 1/2 x 300mm Core Bit Extension 1-1/4 x 400mm Copper Rings Portable Water Supply Unit 1 Plumber Electirician HVAC Integrated friction clutch for highest level of user safety 2 speed gear box Thermal protection to avoid over heating the motor Double shank means the machine is compatible with 1/2 and 1 1/4 cores Progressive start Noise / Vibration Information Noise level with motor: 90dB (A) Drilling Rig Diamond Cores Wet and Dry Vacuums Concrete Coring

44 Drilling Motor RM w UNC 1 ¼ connection Diamond Drilling Power Tools Powerful 3000w motor 3 speed selector The RM350 is designed for ease of use on the TRIX350 drilling rig. The combination is ideally suited to heavy duty work in the demanding conditions found on construction sites. With a 3000w motor, it is powerful enough to tackle even the biggest jobs. Voltage 240V Power Input 3000w Connection 1¼ UNC Max Drilling Capacity Rig Mounted 350mm Motor Speeds Speed 1 Speed 2 Speed 3 Load 230rpm 500rpm 1030rpm Diameter mm mm 50-90mm Rig Compatibility TRIX350 Cable Length 3m Insulation Class II Weight 13Kg Diamond Motor RM350 Part No. Order Qty RM350 Motor 1 Accessories Extension 1-1/4 x 400mm Copper Rings Portable Water Supply Unit 1 Plumber Electirician HVAC Integrated friction clutch for highest level of safety Robust and powerful design 3000w provides optimum torque and drilling speed Thermal protection Long life Noise / Vibration Information Noise level with motor: 90dB (A) Drilling Rig Diamond Cores Wet and Dry Vacuums Concrete Coring

45 Drilling Rig Suits RM250 & RM350 Motors Diamond Drilling Power Tools Block mount connection Adjustable angle Wheel for easy transport Integrated vacuum plate A heavy duty rig that is capable of very accurate coring up to a diameter of 350mm. The trolley system is fitted with rollers to ensure smooth operation even in the worst conditions. A simple low maintenance rig built strong enough to take a heavy work load. Height 1030mm Length 400mm Width 310mm Weight 20Kg Max Drill Depth 652mm Max Core Diameter 350mm Operational Tilt 0-45 Suitable for Motors RM250 & RM350 Diamond Rig TRIX350 Part No. Order Qty TRIX350 Large Drilling Rig 1 Accessories SDP1 Vacuum Pump 200W Vacuum Set Quick Release Connector Bolts Large Water Collector Membranes for Water Collector Portable Water Supply Unit Sharpening Plate 1 Continuous angle adjustment to any position Integrated vacuum plate Easy to operate and adjust Reduces drilling vibration Drilling Motors Wet and Dry Vacuums Diamond Cores

46 Diamond Core Bits Core Bits for Drilling Concete ½ BSP connection 1¼ UNC connection Operating Tips Refer to the drilling machine instructions to ensure the correct speed is selected for the hole size and the hardness of the material being drilled. General rule: Smaller holes higher speed Larger holes lower speed Ensure the motor has adequate power Keep constant pressure on the core, do not force it, allow the diamonds to cut at there own pace For best results ensure an adequate flow of water. Diamond Drilling Power Tools Laser welded diamond segments Ramset Diamond Cores use industrial grade diamond, which is the hardest material on earth. They are ground down into very small pieces and mixed with a metallic paste called the bond. This is what holds the diamonds in place and forms the segments or the teeth of the core bit. Diamonds within the segments are very brittle and break several times before wearing away, this breaking constantly exposes new sharp cutting edges and it is these edges that cut the material. Ramset offer a comprehensive range of Diamond Cores, which have been selected to meet most common coring applications. Diamond Core Drill Bits Part No. ½ BSP Thread Suits Drilling Motor DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160 DCDS mm x 300mm RM160, RM250 Drilling Motors Drilling Rigs Wet and Dry Vacuums Sharpening Plate Wet Core Drill Bits Part No. 1 1/4 UNC Thread Suits Drilling Motor DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM160, RM250, RM350 DCDL mm x 450mm RM250, RM350 DCDL mm x 450mm RM250, RM350 Other cores sizes ( mm) are available on request. Please consult your Ramset representative for advice

47 Wet & Dry Vacuum 30 Litre Diamond Drilling Power Tools Auxilliary Power Connection Permanent filter cleaning function Powerful 1600w motor Heavy duty wheels Powerful industrial quality vacuum cleaner for dust and water extraction. Auto electromagnetic pulse filter cleaning with Permanant Clean - cleans the filters permantly during the vacuuming process without interrupting the intake flow. Voltage Power Container Volume Max Airflow Max Water Column Depression Electric Cable Suction Hose Weight (without hose) 240V 1600W 30 Litres 61 L/s 248 mbar 8m 5m / Ø35mm 15kg Size 550 x 400 x 550mm Wet and Dry Vacuum AC1630P Part No. Order Qty AC1630P 30L vacuum wet & dry 1 Accessories m antistatic hose sets polyester filters Acessory Kit Dust Bags (Pack of 3) 1 Builder Plumber Electrician HVAC Core cutting dust extraction Wall chasing dust extraction 4 Angle Grinder dust extraction Permanent Clean function Powerful motor provides industrial quality cleaning Polyester filters provide longer life Dust free coring, grinding and cutting Dust bag optional All accessories included Suits all trades Noise / Vibration Information Noise level: 70dB (A) Drilling Motors Diamond Cores Angle Grinders Wall Chaser

48 Diamond Drilling Accessories Vacuum System Drill anywhere anchor free *for use in retrofit where anchors cannot be set Diamond Drilling Power Tools Water Collection Mess free concrete coring, water collection kit ensures that there is no mess, portable water unit allows you to work anywhere. Vacuum Cleaner - Part No. AC1630P Portable water supply unit - Part No

49 Diamond Drilling Accessories Diamond Drilling Power Tools Vacuum Sets Part No to suit TRIX160 Drilling Rig Part No to suit TRIX350 Drilling Rig Vacuum Pump For use with Diamond Drilling Rigs Voltage 240V Power Input 200W Current 0.9 A Frequency 50/60 Hz Airflow 30.51/Mn Max Vacuum 0.9 bar Insulation Class Class 1 Protection Class IPX4 IPX4 Dimensions Weight (without cable and hose) Cable length 310 x 238 x 250mm 6.7 kg 4m Vacuum Pump - Part No. SDP1 Vacuum Tank 5L - Pat No Quick Release Bolts M12 for fixing into DynaSet drop-in masonry anchors to secure drill rigs. Quick Realse Bolts - Part No Water Collector Water collector - to suit TRIX160 Rig - Part No Membranes for water collector - Part No Water collector to suit TRIX350 Rig- Part No Membranes for water collector- Part No Copper Rings and Sharpening Plate Set of 5 rings to suit 1 ¼ drive core drills to prevent seizure Copper Rings - Part No Sharpening plate - Part No Extensions for Core Drills ½ x 300mm - Part No ¼ x 400mm - Part No

50 Cutting & Grinding Power Tools

51 Angle Grinder 125mm (5 ) Diamond Drilling Power Tools Variable speed control 1050w motor The RGS125AV angle grinder is ideal for a variety of cutting and grinding applications on the job site Voltage 240V Power 1050w Motor Speed 12000rpm Max. Disc Diameter 125mm Cup Grinding Wheel Max 125mm Weight 1.6kg Cable Length 2.5m Size 300 x 107 x 142mm Angle Grinder Part No Order Qty RGS125AV Angle Grinder 125mm (5 ) 1050w 1 Consumables CW125SU Cut off wheel steel INOX125mm 1 CW125S Cut off wheel steel 125mm 1 CW125M Cut off wheel masonry 125mm 1 GW125S Grinding wheel steel 125mm Diamond Blade Concrete 125mm Diamond Blade Universal 125mm 1 Builder Plumber HVAC Formworker Concrete Grinding & Cutting 4 4 Steel Cutting & Grinding High quality 1050w motor Compact and lightweight Soft start for comfort and safety Anti restart function for added safety Anti vibration auxiliary handle Variable speed control Anti lock flanges for cutting Noise / Vibration Information Sound pressure level Sound power level Vibration Diamond Cutting Blades Cut Off Wheels 90dB(A) 102dB(A) The typical hand-arm vibration does not exceed 1.2m/s

52 Angle Grinder 125mm (5 ) Diamond Drilling Power Tools Anti vibration auxiliary handle Ergonomic housing optional grip Anti restart function DHG125 One click safety guard. Adjustable to 10 positions With 1400w of power and progressive start the RGP125AV is perfectly suited to most cutting and grinding jobs. Voltage Power Motor Speed Max. Disc Diameter Cup Grinding Wheel Max Weight Cable Length Size 240V 1400w 11000rpm 125mm 125mm 2kg 4m 300 x 107 x 142mm Angle Grinder Part No Order Qty RGP125AV Angle Grinder 125mm (5 ) 1400w 1 DHG125 Dust Hood - Grinding 1 Consumables CW125SU Cut off wheel steel INOX125mm 1 CW125S Cut off wheel steel 125mm 1 CW125M Cut off wheel masonry 125mm 1 GW125S Grinding wheel steel 125mm Diamond Blade Concrete 125mm Diamond Blade Universal 125mm Cup Wheel 125mm Double Row (Concrete) Cup Wheel 125mm Single Row (Concrete) Cup Wheel 125mm Turbo Grinding (Concrete) Cup Wheel 125mm Super Turbo (Concrete) 1 Builder Plumber HVAC Formworker Concrete Grinding & Cutting 4 4 Steel Cutting & Grinding Powerful high quality 1400w motor Soft start for comfort and safety Anti restart function for added safety Anti vibration auxiliary handle One touch safety guard with 10 positions Variable speed control Anti lock flanges for cutting Noise / Vibration Information Sound pressure level Sound power level Vibration Diamond Cutting Blades Diamond Cup Wheels Wet & Dry Vacuums Cut Off and Abrasive Wheels 91dB (A) 102B (A) The typical hand-arm vibration does not exceed 5.5m/s

53 Angle Grinder 230mm (9 ) Diamond Drilling Power Tools 3 position auxiliary handle 180 rotatable anti vibration handle Anti vibration housing damper Anti vibration auxiliary handle One touch safety guard With 2400w of power and progressive start the RGP230AV is perfectly suited to larger cutting and grinding jobs. Voltage Power Motor Speed Saw Diameter Cup Grinding Wheel Max Weight Cable Length Size 240V 2400w 6500rpm 230mm 180mm 5.2kg 5m 506 x 139 x 245mm Angle Grinder Part No Order Qty RGP230AV Angle Grinder 230mm (9 ) 2400w 1 Accessories Dust Hood - Cutting Dust Hood - Grinding 1 Consumables CW230S Cut off wheel steel 230mm 1 CW230M Cut off wheel masonry 230mm 1 GW230M Grinding wheel masonry 230mm Diamond Blade Concrete 230mm Diamond Blade Universal 230mm 1 Builder Plumber HVAC Formworker Concrete Grinding & Cutting 4 4 Steel Cutting & Grinding Powerful 2400w motor Soft start for comfort and safety 180 rotatable anti vibration back handle 3 position anti vibration auxiliary handle One touch safety guard Anti lock flanges for cutting Noise / Vibration Information Sound pressure level Sound power level Vibration Diamond Cutting Blades Diamond Cup Wheels Wet & Dry Vacuums Cut Off and Abrasive Wheels 90dB (A) 103B (A) The typical hand-arm vibration does not exceed 4m/s

54 Surface Grinder SG125E 1800w motor Dust extraction connection Ergonomic side handles Cutting & Grinding Power Tools Fast dust free concrete surface grinding. Ideal for small concrete grinding jobs. Power Speed (no load) Spindle Weight Cable 1800w 10000rpm M14 5.5kg 3m Surface Grinder SG125E Part No. Order Qty SG125E Concrete Surface Grinder 1 Accessories Cup wheel - 125mm Turbo Grinding (Concrete) Cup wheel - 125mm Single Row Grinding (Concrete) Cup wheel - 125mm Double Row Grinding (Concrete) Cup wheel - 125mm Superturbo Grinding (Concrete) 1 Builder Concretor Formworker 1800w motor Max. 10,000rpm Ergonomic side handles Dust extraction connection Noise / Vibration Information Sound pressure level: Sound intensity level: 93dB (A) 106dB (A) Concrete surface grinding Concrete finishing / polishing Cup Wheels Wet and Dry Vacuums Cup wheels are available in soft bond for concrete (hard) substrates and hard bond for abrasive (soft) materials to ensure longevity. Single row is for maximum material removal. Double row is used for universal grinding. Turbo cup wheels are designed for light grinding and finishing. The new Superturbo is designed for finishing applications such as formwork seams and graffiti removal

55 Wall Chaser RW150 Cutting & Grinding Power Tools Ergonomic handles Dust extraction connection Powerful 2200w motor mm wide x 50mm deep Fast and dust free concrete chasing. Ideal for concealment of conduit or wires adjustable from 2.6mm to 46.5mm wide and 50mm deep. Voltage Power Input Disc Diameter Groove Depth Groove Width Weight Concrete blades (610002) included 240 Watt 2,200 Watt 150mm 0-50mm mm 7.5kg Wall Chaser RW150E Part No. Order Qty RW150E Wall Chaser 1 Accessories Xtreme Universal 2 Builder Plumber Electrician HVAC Concrete Wall Chasing Quick blade fixing and removal Variable width and depth of the cut Safe ergonomic design Soft start motor Secure concrete face contact for straight cut Close to edge operation Constructed for optimum dust extraction Noise / Vibration Information Sound pressure level: Sound intensity level: 93dB (A) 106dB (A) Wet and Dry Vacuums Diamond Blades

56 Diamond Blade Acessories Diamond Drilling Power Tools Universal Blades are suited to most general cutting applications and have a large operating range for multi surface use. Turbo Titan+ is the long lasting choice into hard concrete. Abrasive Type A is the choice for use into abrasive materials such as brick and block. Material removal process Blade Types Part No. Diameter (mm) Xtreme Universal mm mm mm Xtreme Concrete mm mm Factors affecting the cutting characteristics of a diamond saw blade Cutting conditions Machine Material Cutting depth Power drawn Density Feed rate RPM Abrasivity Cutting pressure Condition of the machine Nature of aggregates Quality of coolant Coolant supply Size of aggregates Type of reinforcement Type of foundation

57 Laser Devices Measuring/Levelling Tools Laser Devices

58 Rotary Laser Green Rotating high powered green class 3R laser diode Laser Devices Dual rotating speeds and various scanning angles IP54 dust and water protection *Tripod not included A fully automatic horizontal and vertical green rotary laser. Compact ergonomic design and intuitive operation. A multi function laser designed for interior applications. Power Supply NiMH (Rechargeable) 24h Self Levelling Range 5 Laser Diode Green 532nm Accuracy Horizontal ± 1.0mm / 10m Accuracy Vertical ± 1.5mm / 10m Working Range with Receiver Ø 400m Rotating Speed 200, 500rpm Scan Angles 0, 45, 90 Manual Slope Setting X and Y Axis ± 5 (± 9%) Temperature Range 0 C C Dust and Water Protection IP54 Laser Class 3R Weight 1.95kg Formwork levelling & allignment Pipe & Cable tray installation Allignment and placement of drywall track Concrete levelling (interior) Builder Plumber Electrician HVAC Ceiling & Partitioners 4 Rotary Laser Part No Order Qty RL200G Rotating Laser - Green 1 Remote control, wall mount, magnetic target, rechargeable battery / charger, laser glasses and carry case High powered green laser beam for high visibility Rotating diode protected by cover Two rotating speeds Variable scanning and laser point mode for set-up Permanent 90 plumb up beam TILT function ensures rotation even with light vibration Adjusted slope setting (manual) up to ± 5 ( ± 9%) in X and Y axis for grade work Remote control Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave

59 Rotary Laser Red Laser Devices Rotating high powered red class 3R laser diode Vertical mode Dual rotating speeds and various scanning angles IP66 dust and water protection Bracket mounted A fully automatic horizontal and vertical laser. Compact ergonomic design and intuitive operation. A multi function laser for both interior and exterior applications. Power Supply 6.4V Li-Ion Self Levelling Range 5 Laser Diode Red 635nm Accuracy Horizontal ± 0.5mm / 10m Accuracy Vertical ± 1.0mm / 10m Working Range with Receiver Ø 600m Rotating Speed 800, 300rpm Scan Angles 0, 10, 45, 90, 180 Manual Slope Setting X and Y ± 5 (± 9%) Axis Temperature Range -10 C C Dust and Water Protection IP66 Laser Class 3R Weight 2.6kg Formwork levelling & allignment Pipe & Cable tray installation Allignment and placement of drywall track Concrete levelling 4 Site preparation & 4 excavation Builder Plumber Electrician HVAC Ceiling & Partitioners 4 Rotary Laser Part No Order Qty RL300 Rotating Laser 1 Remote control, floor mount, magnetic target, rechargeable battery / charger, laser glasses and carry case High powered laser beam for easy visibility Two rotating speeds Variable scanning and laser point mode for set-up Permanent 90 beam to zenith for set outs V-W-S function combined with TILT function ensures rotation even with light vibration Adjusted slope setting (manual) up to ± 5 ( ± 9%) in X and Y axis for grade work Li-Ion battery technology. No memory effect or self discharge Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave

60 Multi-Line Laser RLML - Interior Applications Plumb up and down laser beam Laser Devices 2 vertical and 1 horizontal laser lines Mini tripod A versatile laser for numerous indoor applications. Two laser crosses at 90 to each other. Laser cross to the ceiling. Plumb down beam to the floor Power Supply 3 x 1.5V AA Batteries Self Levelling Range ± 3 Laser Diode Red 635nm Accuracy ± 3mm / 10m Working Range without Receiver Ø 10m* Working Range with Receiver Ø 30m Operating Time 12h Temperature Range -10 C C Dust and Water Protection IP54 Laser Class 3R Weight 1.0kg * Depending on room illumination Multi-LIner Laser Part No Order Qty RLML Multi Liner Laser 1 Floor/wall mount, mini tripod, magnetic target, set of batteries and Padded carry case Allignment and placement of drywall track Allignment and placement of tiles Ceiling & Partitioners 4 Tiler 4 Two lasers cross at 90 to each other for set out work Laser cross to the ceiling giving plumb up Plumb down beam Pulse function for use with receiver giving extended range or outdoor use Locking device for safe transport Visual and audible alarm when out of level Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave

61 Cross Pointer Laser RLCP - Interior Applications Laser Devices Two Cross Lines (Vertical & Horizontal) 5 point 650nm red laser diode Strong magnetic base plate A versatile laser for numerous indoor applications. Three laser crosses at 90 to each other. Laser cross to the ceiling. Plumb down beam to the floor Power Supply 3 x 1.5V AA Batteries Self Levelling Range ± 4 Laser Diode Red 635nm Accuracy ± 3mm / 10m Working Range Ø 80m with receiver Operating Time 7h Temperature Range -10 C C Laser Class 2 Dust & Water Protection IP54 * Depending on room illumination Multi-Pointer Laser Part No Order Qty RLCP Cross Point Laser 1 Multi-functional mount, magnetic target, strap attachment, batteries & hard case Alignment of drywall 4 Planning, layout for 4 fixtures & fittings Conduit, trunking, 4 switches & sockets Pipes, cables & radiators Electrician Partitioners HVAC Plumber ways gives user more measurements without repositioning the laser, and is easily re-calibrated High accuracy delivers a better finish and reduces time spent on site Strong magnetic base plate allows laser to be set up where ever it is needed quickly and accurately Laser target helps operator use laser in high ambient light Ease of operation provides less chance of inaccurate readings Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave

62 Cross Beam Laser RLCL - Interior Applications Detachable multi functional mount Laser Devices High specification red 635nm laser diode Locking mechanism for safe transport Robust and handy high powered cross level laser for horizontal and vertical levelling and aligning Power Supply 3 x 1.5V AA Batteries Self Levelling Range ± 4 Laser Diode Red 635nm Accuracy ± 3mm / 10m Working Range without Receiver Ø 20m* Working Range with Receiver Ø 30m Operating Time 48h Temperature Range -10 C C Dust and Water Protection IP54 Laser Class 3R Weight 0.8kg * Depending on room illumination Cross Beam Laser Part No Order Qty RLcl Cross Beam Laser 1 Multi-Functional mount, magnetic target, set of batteries and padded carry case Plumber Electrician HVAC Conduit, Trunking, 4 Switches, Sockets Pipes 4 Cables & Radiators 4 High specification diodes for optimum visibility of laser lines Detachable multi-functional mount to fit 5/8 or 1/4 thread Strong and side magnets for easy positioning on steel structure Pulse function for use with receiver Locking device for safe transport Visual and audible alarm when out of level Related Accessories Universal Tripod Wall and Ceiling Mount Floor to Ceiling Pillar Stave

63 Distance Meter EL80 - Interior & Exterior Applications Laser Devices Illuminated display IP54 dust and water protection Area, volume, pythagoras and stake out measurent functions Stores up to 10 measurements The Ramset EL80 Easy Laser Distance Measurer has a multitude of functions designed for daily measurement tasks that exist on a job site. In addition to measuring lengths, area and volume the EL80 has a stake out function designed for the accurate placement of studs. It also includes Pythagoras functions for the measurement of inaccessible points. The Ramset Easy Laser has a maximum measuring distance of 80 metres. Power Supply 2 x AAA batteries Laser Diode 635nm<1mW Accuracy ± 1.5mm Measuring Range m Dimensions 117x57x32mm Laser Class 2 Dust and Water Protection IP54 Weight 130g Distance Meter Part No Order Qty EL80 Easy Laser 1 Builder Plumber Electrician HVAC Ceiling & Partitioners Measuring Distances Calculating area & volume of a room 4 Setting out studs 4 Small handy size with soft grip Allows highly accurate measurements to be taken Illuminated display for ease of use in low light conditions Robust design with IP54 spray water and dust resistant Includes stake out and Pythagoras functions Digital memory retains last 10 measurements

64 Laser Accessories Tripods Strong, durable and reliable tripods that is ideal for use with all laser measuring devices. Robust aluminium construction Quick clamp system Shoulder carrying strap RLTP FS30XS Tripod Head: Flat Head Flat Head Tripod Head Dia: 158mm Size: cm cm Weight: 5.1kg 5.7kg Laser Devices RLTP FS30XS Floor to Ceiling Pillar A floor to ceiling pillar for use indoor use to set and adjust the height positioning of a laser device. Pillar is made up of 5 sections 5/8 and 1/4 adaptor The individual; poles are equipped with 5/8 threads to enable them to be mounted on a tripod should no ceiling surface be available. Supplied with a carrying bag. Maximum Length: 3.4m Part No. RFSP Wall & Ceiling Mount A robust mount for use with all Ramset lasers on walls and ceilings. Ideal for indoor uses such as setting out suspended ceilings. Precise adjustment / alignment with large slow motion wheel Graduation - cm / inch Supplied with a carrying bag. Platform Size: 150 x 95mm Part No. RWCM Telescopic Leveling Staff A strong fully adjustable aluminium staff for easy reading of levels. Silver anodised finish Fully adjustable Secure snap-in at each metre. Front side cm-e graduation throughout total length Reverse side graduation in mm for height measurements. Maximum Height: 5m Part No. RST