EA - Elektro-Automatik. Hightech Power Supplies and Electronic Loads. Elektro-Automatik

Transcription

1 EA - Elektro-Automatik Hightech Power Supplies and Electronic Loads Elektro-Automatik

2 DEVELOPING TOMORROW S VISIONS TODAY... Technical know-how, flexibility and short lead times make EA the preferred supplier for well-known companies and institutes.

3 High power electronics made in Germany EA-Elektro-Automatik LLC is Germany s leading manufacturer of laboratory power supplies, high performance mains units and electronic loads. EA-Elektro-Automatik was founded in 1974 by Helmut Nolden with the vision of developing high quality power supplies for all applications. Today EA-Elektro-Automatik is a modern medium-sized enterprise. Approximately 250 employees research, develop and manufacture at the m² main site in Viersen. With the aid of an extensive dealer network, high-tech technology from Niederrhein is delivered globally. Switched on: Development competence of the highest level Concept, design, technical development and specification of our power supply systems is carried out in-house as a matter of principle. In this way the technical advances made by our development team can be incorporated directly in finished products. Thus our engineers look not only at the market requirements of today but develop solutions for the technical challenges of tomorrow. Energized: short time-to-market Development cycles for new systems are getting shorter. Technological excellence means that we must have flexible production processes so that we can answer short term production-specific customer demands. We guarantee our customers rapid reaction in the event of an emergency. Innovation through R & D Innovation is of major significance at EA. We are passionate in our development and production of laboratory and high performance power supplies as well as electronic loads, which set standards for functionality, flexibility and reliability. The results of more than four decades research and development flow directly into new products. With the introduction of flexible output stages in laboratory power supplies and energy recovery from electronic loads we are pioneers of new technologies. High quality and absolute reliability New ideas and visions for products of the future Short development cycles for new equipment

4 SMD assembly AOI Selective soldering Automatic PCA test Technological leadership Competence in testing at our own laboratories All EMC measurements and safety related tests are carried out in our inhouse testing laboratories. Furthermore, our high-tech devices are TÜV certified to EN class B. During the manufacturing process the incorporated modules and building blocks are tested with an automatic test adaptor. Subsequently a computer controlled test system calibrates and performs tests for function and all quality relevant parameters. All test and calibration data are recorded and can be retrieved. Following final control all devices undergo a burn-in test under maximum load. These are carried out at an ambient temperature of 40 C using an electronic load with energy feedback. Thus the power consumed in the test is not released as heat but rather fed back into the domestic power supply. Proximity to customers We maintain close contact with our customers. Thus we understand their needs. The high level of technical know-how of our associates enable us to deliver power supply units and systems which exactly meet customer requirements. Our highly specialised team are developing innovative solutions today for the technical demands of tomorrow. Focus on new technology When it comes to introducing new technologies EA is the leader in its sector. Laboratory power supplies with an auto-ranging feature of a flexible output stage and electronic loads with energy recovery were both the brainchild of EA. Colour TFT touch screens for intuitive operation of laboratory power supplies also have their origin at EA. Recovery 95% = 2.85 kw 100 % U Nom Extra power P Nom AC DC E.U.T e.g. power supply 50 % Standard power I Nom Extra power Consumer e.g. 3 kw 50 % 100 %

5 Wave soldering line Manufacturing Automatic unit end test Burn In Custom made: Products and support Whether in the laboratory, industry or training, EA offers a wide and deep product spectrum for virtually any application: laboratory and industry power supplies, electronic loads as well as mountable, DIN rail or 19 plug-in power supplies. Based on these standard programs we also develop custom built equipment and systems to meet your requirements. A specific attribute is that all our products have an optimised energy usage by reaching an above average efficiency of up to 95%. In addition, our EA team of highly specialised technology experts are there to help with all issues around power supply units and electronic loads. Well prepared: viewing the future With manufacturing sites in Germany and the Far East, EA is well prepared for the future. The signs are set for expansion: technical know-how, flexibility and short lead times make us a globally preferred supplier of wellknown companies and institutes. Quality is our standard A quality management system certified to DIN ISO ensures that processes in all phases of the value chain are documented. This leads to the high technical reliability of our power supply equipment and electronic loads. We guarantee a continuous high quality, from goods receipt through all manufacturing steps to final inspection. Production on the highest technical level Short routes and quick reactions Long standing experience, knowledge and a progressive working style

6 Programmable DC laboratory power supplies 1 kw - 3 kw in 19" format PSI U PS U Wide choice of voltages, current and powers Flexible output stage High efficiency of up to 93% Intuitive handling due to multi-language colour TFT touch panel Clear blue LCD display (PS U) Extensive function generator (PSI) Simulation of an internal resistance (PSI) For photovoltaics, battery and fuel cell tests (PSI) Master-slave feature (PSI) Protective features (OVP, OCP, OT ) USB and analog interface integrated Ethernet interface integrated (PS) Plug&Play slot for digital interfaces (PSI) All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package IVI driver package (PSI) SCPI & Modbus protocol 40V models according to SELV 19 enclosures in 1U or 2U U I P R OVP OCP OPP OTP USB LAN Series Power Voltage Current R mode Height FG (1 MS (2 Display Optional digital interfaces PS U 1.5 / 3 kw V A no 1 U no no LCD - PS U 1 / 1.5 / 3 kw V A no 2 U no no TFT Touch GPIB PSI U 1 / 1.5 / 3 kw V A yes 2 U yes yes TFT Touch GPIB, CAN, Profibus, Ethernet, CANopen (1 Function generator (2 Master-slave 6

7 Technical specifications Series PS U Series PS U Series PSI U AC: Voltage range 1500 W: V 3000 W: V AC 1ph+N, Hz, power factor >0.99 DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power Protections Insulation <0.1% of rated value <0.2% of rated value <1% of rated value Standards EN 61326, EN Cooling Weight 1000 W / 1500 W: V 3000 W: V Overtemperature, overvoltage, overcurrent, overpower, power fail Output to enclosure: max. 400 V on the DC minus, max. 400 V DC + output voltage on the DC plus Temperature controlled fans 1500 W: 10.5 kg 3000 W: 11 kg 1000 W / 1500 W: 12 kg 3000 W: 15 kg 1000 W / 1500 W: V 3000 W: V 1000 W / 1500 W: 12 kg 3000 W: 15 kg Dimensions (W x H x D) 19" x 1U x 500 mm 19" x 2U x 463 mm 19" x 2U x 463 mm Model PSI U PS U PSI U PS U PSI U PS U PSI U PS U PSI U PS U PSI U PS U Voltage rating V V V V V V Current rating A A A A A A Power rating W W W W W W Ripple U 114 mv PP / 8 mv RMS 114 mv PP / 8 mv RMS 164 mv PP / 34 mv RMS 210 mv PP / 59 mv RMS 190 mv PP / 48 mv RMS 50 mv PP / 6 mv RMS Efficiency 92% 92% 93% 93% 93% 93% Model PSI U PS U PSI U PS U PSI U PS U PSI U PS U PSI U PS U PSI U PS U Voltage rating V V V V V V Current rating A A A A A A Power rating W W W W W W Ripple U 114 mv PP / 8 mv RMS 114 mv PP / 8 mv RMS 164 mv PP / 34 mv RMS 210 mv PP / 59 mv RMS 190 mv PP / 48 mv RMS 212 mv PP / 60 mv RMS Efficiency 92% 92% 93% 93% 93% 93% Model PSI U PS U PSI U PS U PSI U PS U PSI U PS U PSI U PS U PSI U PS U Voltage rating V V V V V V Current rating A A A A A A Power rating W W W W W W Ripple U 114 mv PP / 8 mv RMS 114 mv PP / 8 mv RMS 164 mv PP / 34 mv RMS 210 mv PP / 59 mv RMS 190 mv PP / 48 mv RMS 212 mv PP / 60 mv RMS Efficiency 92% 92% 93% 93% 93% 93% Model PS U PS U PS U PS U PS U Voltage rating V V V V V Current rating A A A A A Power rating W W W W W Ripple U 100 mv PP / 5.2 mv RMS 293 mv PP / 51 mv RMS 195 mv PP / 33 mv RMS 293 mv PP / 63 mv RMS 260 mv PP / 40 mv RMS Model PS U PS U PS U PS U PS U Voltage rating V V V V V Current rating A A A A A Power rating W W W W W Ripple U 76 mv PP / 4.2 mv RMS 234 mv PP / 40 mv RMS 156 mv PP / 25 mv RMS 234 mv PP / 50 mv RMS 260 mv PP / 40 mv RMS 7

8 Programmable DC high efficiency power supplies PSI U PS U For 400 V grids (PSI / PS) For 380 V, 400 V and 480 V grids (PSI WR Wide choice of voltages, current and powers Flexible output stage Intuitive handling due to multi-language colour TFT touch panel Extensive function generator (PSI) Simulation of an internal resistance (PSI) For photovoltaics, battery and fuel cell tests (PSI) Master-slave feature (PSI) Protective features (OVP, OCP, OT ) USB and analog interface integrated Ethernet interface integrated (PS) Plug&Play slot for digital interfaces (PSI) All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package IVI driver package (PSI) Slave units for power stacking (PSI / PSI WR) Cabinet systems up to 90 kw (p. 12) Custom built cabinet systems up to 480 kw (p. 15) U I P R OVP OCP OPP OTP USB LAN Series Power Voltage Current R mode FG (1 MS (2 Display Optional digital interfaces PS U 5 / 10 / 15 kw V A no no no TFT GPIB PSI U 5 / 10 / 15 kw V A yes yes yes TFT Touch GPIB, CAN, Profibus, Ethernet, CANopen, EtherCAT... PSI 9000 WR 5 / 10 / 15 kw V A yes yes yes TFT Touch GPIB, CAN, Profibus, Ethernet, CANopen, EtherCAT... (1 Function generator (2 Master-slave 8

9 Technical specifications Series PS U Series PSI U Series PSI 9000 WR AC V, 2/3ph, Hz, power factor > V, 2/3ph, Hz, power factor >0.99 DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power Protections Standards Cooling <0.1% of rated value <0.2% of rated value <1% of rated value Overtemperature, overvoltage, overcurrent, overpower, power fail EN 61326, EN 61010, EN class B Temperature controlled fans (optional: water) Dimensions (W x H x D) 19" x 3U x 609 mm 19" x 3U x 670 mm Model PSI U PS U PSI WR PSI U PSI WR PS U 9 PSI U PSI WR PS U PSI U PSI WR PS U PSI U PSI WR PS U Voltage rating V V V V V V Current rating A A A A A A Power rating W W W W W W Insulation DC- / DC+ ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±600 V ±400 V / ±600 V ±725 V / ±1000 V ±1500 V / ±1800 V (WR) Weight 17 kg 18 kg 17 kg / 18 kg (WR) 17 kg / 18 kg (WR) 17 kg / 18 kg (WR) 17 kg / 18 kg (WR) Model PSI U PSI WR PS U PSI U PS U PSI U PS U PSI WR PSI U PSI WR PS U PSI U PSI WR PS U Voltage rating V V V V V V Current rating A A A A A A Power rating W W W W W W Insulation DC- / DC+ ±725 V / ±1000 V ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±600 V ±1500 V / ±1800 V (WR) Weight 17 kg / 18 kg (WR) 24 kg 30 kg 25 kg 24 kg / 25 kg (WR) 24 kg / 25 kg (WR) Model PSI U PSI WR PS U PSI U PSI WR PS U PSI U PSI WR PS U PSI U PS U PSI WR Voltage rating V V V V V V PSI U PSI WR PS U Current rating A A A A A A Power rating W W W W W W Insulation DC- / DC+ ±400 V / ±600 V ±725 V / ±1000 V ±725 V / ±1000 V ±725 V / ±1000 V ±400 V / ±400 V ±400 V / ±400 V ±1500 V / ±1800 V (WR) ±1500 V / ±1800 V (WR) Weight 24 kg / 25 kg (WR) 24 kg / 25 kg (WR) 24 kg / 25 kg (WR) 25 kg 31 kg 30 kg / 32 kg (WR) Model PSI U PSI WR PS U PSI U PSI WR PS U PSI U PSI WR PS U PSI U PSI WR PS U PSI U PSI WR PS U PSI U PSI WR PS U Voltage rating V V V V V V Current rating A A A A A A Power rating W W W W W W Insulation DC- / DC+ ±400 V / ±600 V ±400 V / ±600 V ±725 V / ±1000 V ±725 V / ±1000 V ±725 V / ±1000 V ±725 V / ±1000 V ±1500 V / ±1800 V (WR) ±1500 V / ±1800 V (WR) ±1500 V / ±1800 V (WR) ±1500 V / ±1800 V (WR) Weight 30 kg / 32 kg (WR) 30 kg / 32 kg (WR) 30 kg / 32 kg (WR) 30 kg / 32 kg (WR) 30 kg / 32 kg (WR) 30 kg / 32 kg (WR)

10 Bidirectional DC high efficiency power supplies 5 kw - 15 kw in 19" format PSB 9000 Wide input range for 380 V, 400 V and 480 V grids Wide choice of voltages, current and powers Bidirectional - power supply and electronic load in one Energy recovery of consumed energy in sink operation Intuitive handling due to multi-language colour TFT touch panel Extensive function generator For photovoltaics, battery and fuel cell tests Master-slave feature (PSI) Protective features (OVP, OCP, OT ) USB and analog interface integrated Ethernet interface integrated (PS) Plug&Play slot for digital interfaces (PSI) All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package Slave units for power stacking 19 enclosures in 3U Cabinet systems up to 90 kw (p. 12) Custom specific systems up to 480 kw (p. 15) U I P R OVP OCP OPP OTP USB Technical specifications Series PSB 9000 AC V, 2/3ph, Hz, power factor >0.99 DC: Accuracy of voltage <0.1% vof rated value DC: Accuracy of current <0.2% of rated value DC: Accuracy of power <1% of rated value DC: Accuracy of resistance <1% of rated max. value + 0.3% of current rating Protections Overtemperature, overvoltage, overcurrent, overpower, power fail Standards EN 60950, EN Cooling Temperature controlled fans (optional: water) Optional interfaces CAN, GPIB, Ethernet, EtherCAT, Profinet, Profibus, RS232, CANopen, ModBus TCP Dimensions (W x H x D) 19" x 3U x 670 mm 10

11 Model PSB PSB PSB PSB PSB Voltage rating V V V V V Ripple <200 mv PP / <16 mv RMS <200 mv PP / <16 mv RMS <300 mv PP / <40 mv RMS <320 mv PP / <55 mv RMS <350 mv PP / <70 mv RMS Current rating A A A A A Power rating W W W W W Insulation DC- / DC+ ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±600 V ±400 V / ±600 V ±1500 V / ±1800 V Slave extension Weight 18 kg 18 kg 18 kg 18 kg 18 kg Model PSB PSB PSB PSB PSB Voltage rating V V V V V Ripple <800 mv PP / <200 mv RMS <320 mv PP / <25 mv RMS <320 mv PP / <25 mv RMS <300 mv PP / <40 mv RMS <320 mv PP / <55 mv RMS Current rating A A A A A Power rating W W W W W Insulation DC- / DC+ ±1500 V / ±1800 V ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±600 V ±400 V / ±600 V Slave extension Weight 18 kg 25 kg 25 kg 25 kg 25 kg Model PSB PSB PSB PSB PSB Voltage rating V V V V V Ripple <350 mv PP / <70 mv RMS <800 mv PP / <200 mv RMS <320 mv PP / <25 mv RMS <320 mv PP / <25 mv RMS <300 mv PP / <40 mv RMS Current rating A A A A A Power rating W W W W W Insulation DC- / DC+ ±1500 V / ±1800 V ±1500 V / ±1800 V ±400 V / ±400 V ±400 V / ±400 V ±400 V / ±600 V Slave extension - - PSB Slave PSB Slave PSB Slave Weight 25 kg 25 kg 32 kg 32 kg 32 kg Model PSB PSB PSB PSB PSB Voltage rating V V V V V Ripple <320 mv PP / <55 mv RMS <350 mv PP / <70 mv RMS <800 mv PP / <200 mv RMS <1600 mv PP / <300 mv RMS <2400 mv PP / <400 mv RMS Current rating A A A A A Power rating W W W W W Insulation DC- / DC+ ±400 V / ±600 V ±1500 V / ±1800 V ±1500 V / ±1800 V ±1500 V / ±1800 V ±1500 V / ±1800 V Slave extension PSB Slave PSB Slave PSB Slave PSB Slave PSB Slave Weight 32 kg 32 kg 32 kg 32 kg 32 kg 11

12 Programmable high efficiency power supplies 30 kw - 90 kw as 19" cabinet Also as bidirectional variants (PSB 9000) or with recovering electronics loads (ELR 9000 HP) PSI U & PSB U PSI U & PSB U Preconfigured for instant operation Wide choice of voltages, current and powers Flexible output stage High efficiency of up to 93% Intuitive handling due to multi-lingual colour TFT touch panel Extensive function generator Simulation of an internal resistance For tests on photovoltaics, fuel cells and more Protective features (OVP, OCP, OT ) USB and analog interface integrated Plug&Play slot for digital interfaces (PSE/PSI) All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package IVI driver package (PSI) SCPI & Modbus protocols supported 19 cabinets in 15U or 24U, mobile U I P R OVP OCP OPP OTP USB Series Power Voltage Current Optional digital interfaces PSI U kw V A PSI U kw V A PSB U kw V A PSB U kw V A GPIB, CAN, Profibus, Profinet, EtherCAT, Ethernet, CANopen, RS232, ModBus TCP ELR 9000 HP 15U kw V A ELR 9000 HP 24U kw V A 12

13 Technical specifications Series PSI U / Series PSI U AC V, 3ph, Hz, power factor >0.99 DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power Protections Standards Cooling Dimensions (W x H x D) <0.1% of rated value <0.2% of rated value <1% of rated value Overtemperature, overvoltage, overcurrent, overpower, power fail EN 61326, EN 61010, EN class B Temperature controlled fans (optional: water) 15U models: 19" x 15U x 1000 mm 24U models: 19" x 24U x 1000 mm Model Voltage rating Current rating Power rating AC supply current Insulation DC- / DC+ to PE Height PSI U V A kw ~ 56 A ± 400 V V 15U PSI U V A kw ~ 56 A ± 400 V V 15U PSI U V A kw ~ 56 A ± 400 V V 15U PSI U V A kw ~ 56 A ± 725 V V 15U PSI U V A kw ~ 56 A ± 725 V V 15U PSI U V A kw ~ 56 A ± 1000 V V 15U PSI U V A kw ~ 56 A ± 1000 V V 15U PSI U V A kw ~ 84 A ± 400 V V 15U PSI U V A kw ~ 84 A ± 400 V V 15U PSI U V A kw ~ 84 A ± 400 V V 15U PSI U V A kw ~ 84 A ± 725 V V 15U PSI U V A kw ~ 84 A ± 725 V V 15U PSI U V A kw ~ 84 A ± 1000 V V 15U PSI U V A kw ~ 84 A ± 1000 V V 15U PSI U V A kw ~ 112 A ± 400 V V 24U PSI U V A kw ~ 112 A ± 400 V V 24U PSI U V A kw ~ 112 A ± 400 V V 24U PSI U V A kw ~ 112 A ± 725 V V 24U PSI U V A kw ~ 112 A ± 725 V V 24U PSI U V A kw ~ 112 A ± 1000 V V 24U PSI U V A kw ~ 112 A ± 1000 V V 24U PSI U V A kw ~ 140 A ± 400 V V 24U PSI U V A kw ~ 140 A ± 400 V V 24U PSI U V A kw ~ 140 A ± 400 V V 24U PSI U V A kw ~ 140 A ± 725 V V 24U PSI U V A kw ~ 140 A ± 725 V V 24U PSI U V A kw ~ 140 A ± 1000 V V 24U PSI U V A kw ~ 140 A ± 1000 V V 24U PSI U V A kw ~ 168 A ± 400 V V 24U PSI U V A kw ~ 168 A ± 400 V V 24U PSI U V A kw ~ 168 A ± 400 V V 24U PSI U V A kw ~ 168 A ± 725 V V 24U PSI U V A kw ~ 168 A ± 725 V V 24U PSI U V A kw ~ 168 A ± 1000 V V 24U PSI U V A kw ~ 168 A ± 1000 V V 24U 13

14 Technical specifications Series PSB U / Series PSB U AC V, 3ph, Hz, power factor >0.99 DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power Protections <0.1% of rated value <0.2% of rated value <1% of rated value Standards EN 61326, EN Cooling Dimensions (W x H x D) Overtemperature, overvoltage, overcurrent, overpower, power fail Temperature controlled fans (optional: water) 15U models: 19" x 15U x 1000 mm 24U models: 19" x 24U x 1000 mm Model Voltage rating Current rating Power rating AC supply current Insulation DC- / DC+ to PE Height PSB U V A kw ~ 56 A ± 400 V V 15U PSB U V A kw ~ 56 A ± 400 V V 15U PSB U V A kw ~ 56 A ± 400 V V 15U PSB U V A kw ~ 56 A ± 1500 V V 15U PSB U V A kw ~ 56 A ± 1500 V V 15U PSB U V A kw ~ 56 A ± 1500 V V 15U PSB U V A kw ~ 56 A ± 1500 V V 15U PSB U V A kw ~ 84 A ± 400 V V 15U PSB U V A kw ~ 84 A ± 400 V V 15U PSB U V A kw ~ 84 A ± 400 V V 15U PSB U V A kw ~ 84 A ± 1500 V V 15U PSB U V A kw ~ 84 A ± 1500 V V 15U PSB U V A kw ~ 84 A ± 1500 V V 15U PSB U V A kw ~ 84 A ± 1500 V V 15U PSB U V A kw ~ 112 A ± 400 V V 24U PSB U V A kw ~ 112 A ± 400 V V 24U PSB U V A kw ~ 112 A ± 400 V V 24U PSB U V A kw ~ 112 A ± 1500 V V 24U PSB U V A kw ~ 112 A ± 1500 V V 24U PSB U V A kw ~ 112 A ± 1500 V V 24U PSB U V A kw ~ 112 A ± 1500 V V 24U PSB U V A kw ~ 140 A ± 400 V V 24U PSB U V A kw ~ 140 A ± 400 V V 24U PSB U V A kw ~ 140 A ± 400 V V 24U PSB U V A kw ~ 140 A ± 1500 V V 24U PSB U V A kw ~ 140 A ± 1500 V V 24U PSB U V A kw ~ 140 A ± 1500 V V 24U PSB U V A kw ~ 140 A ± 1500 V V 24U PSB U V A kw ~ 168 A ± 400 V V 24U PSB U V A kw ~ 168 A ± 400 V V 24U PSB U V A kw ~ 168 A ± 400 V V 24U PSB U V A kw ~ 168 A ± 1500 V V 24U PSB U V A kw ~ 168 A ± 1500 V V 24U PSB U V A kw ~ 168 A ± 1500 V V 24U PSB U V A kw ~ 168 A ± 1500 V V 24U 14

15 High efficiency DC power supply systems Up to 480 kw in 19" cabinets Custom-made cabinet systems U I P R OVP OCP OPP OTP USB... Customer specific, fully configured cabinet systems For standard or bidirectional power supplies and loads: PSB 9000 PSI U PSI 9000 WR PS U ELR 9000 ELR 9000 HP Master-slave system, also with true slave models Up to 180 kw per cabinet in max. 47U Air cooling or water cooling Delivered either assembled or disassembled Safety of machinery acc. EN UL 508 / NFPA 79 Many options: Emergency stop Water cooling Door contacts AC cord with CEE plug Grid protection Insulation guard etc. Technical specifications Base systems Type EA Rittal TS8 Cabinet width 600 mm 600 mm Cabinet depth 1000 mm 1000 mm AC supply type Three-phase Three-phase AC supply voltage V or V ( V or V (2 Cabinet height (U) x Max. number of devices Max. power (1 45 kw 90 kw 120 kw 150 kw 450 kw 180 kw (1 Depending on the power rating of the installed devices (2) Depending on the installed devices 15

16 Programmable DC laboratory power supplies 320 W kw in desktop enclosure PS 9000 T PSI 9000 DT Wide AC input range V AC Wide choice of voltages, current and powers Flexible output stage Intuitive handling due to multi-language colour TFT touch panel Extensive function generator (PSI) Simulation of an internal resistance (PSI) For photovoltaics or fuel cell tests and more (PSI) Protective features (OVP, OCP, OT ) Analog interface integrated (PSI 9000 DT) USB & Ethernet integrated (PSI 9000 DT) USB as standard port All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package IVI driver package (PSI) SCPI & Modbus protocol 40V models (SELV) Enclosures as tower or desktop version U I P R OVP OCP OPP OTP USB LAN Series Power Voltage Current Function generator Display Handle USB LAN Analog PS 9000 T W V 4-60 A no TFT Touch no yes optional optional PSI 9000 T W V 4-60 A yes TFT Touch no yes optional optional PSI 9000 DT 1000 W / 1500 W V 4-60 A yes TFT Touch yes yes yes yes 16

17 Technical specifications Model PSI T PS T Series PSI 9000 T / Series PS 9000 T / Series PSI 9000 DT AC V, 1ph+N, Hz, power factor >0.99 DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power Protections Standards Cooling <0.1% of rated value <0.1% of rated value <1% of rated value Overtemperature, overvoltage, overcurrent, overpower, power fail EN 61326, EN 61010, EN Klasse B Temperature controlled fan Weight 320 W / 640 W: ca. 7 kg 1000 W / 1500 W: ca. 8 kg Dimensions (W x H x D) PS 9000 / PSI 9000 T 320 W / 640 W: 92 x 239 x 352 mm PS 9000 / PSI 9000 T 1000 W / 1500 W: 92 x 239 x 412 mm PSI 9000 DT: 320 W / 640 W: 308 x 103 x 355 mm PSI 9000 DT: 1000 W / 1500 W: 308 x 103 x 415 mm PSI T PS T PSI T PS T PSI T PS T PSI T PS T PSI T PS T PSI T PS T Voltage V V V V V V V Current A A A A A A A Power W W W W W W W Ripple U 20 mv PP / 2 mv RMS 20 mv PP / 2 mv RMS 50 mv PP / 6 mv RMS 20 mv PP / 2 mv RMS 20 mv PP / 2 mv RMS 50 mv PP / 6 mv RMS 25 mv PP / 4 mv RMS Ripple I 1 ma RMS 1 ma RMS 1.5 ma RMS 1 ma RMS 1 ma RMS 1.5 ma RMS 6 ma RMS Model PSI T PS T PSI T PS T PSI T PS T PSI T PS T PSI T PS T PSI T PS T PSI T PS T Voltage V V V V V V V Current A A A A A A A Power W W W W W W W Ripple U 25 mv PP / 4 mv RMS 150 mv PP / 23 mv RMS 150 mv PP / 23 mv RMS 25 mv PP / 4 mv RMS 25 mv PP / 4 mv RMS 150 mv PP / 23 mv RMS 155 mv PP / 33 mv RMS Ripple I 6 ma RMS 1.8 ma RMS 8 ma RMS 6 ma RMS 6 ma RMS 1.8 ma RMS 8 ma RMS Model PSI DT PSI DT PSI DT PSI DT PSI DT PSI DT PSI DT Voltage V V V V V V V Current A A A A A A A Power W W W W W W W Ripple U 8 mv PP / 0.8 mv RMS 8 mv PP / 0.8 mv RMS 20 mv PP / 2.5 mv RMS 8 mv PP / 0.8 mv RMS 8 mv PP / 0.8 mv RMS 20 mv PP / 2.5 mv RMS 10 mv PP / 1.5 mv RMS Ripple I 1 ma RMS 1 ma RMS 1.5 ma RMS 1 ma RMS 1 ma RMS 1.5 ma RMS 6 ma RMS Model PSI DT PSI DT PSI DT PSI DT PSI DT PSI DT PSI DT Voltage V V V V V V V Current A A A A A A A Power W W W W W W W Ripple U 10 mv PP / 1.5 mv RMS 60 mv PP / 9 mv RMS 58 mv PP / 11 mv RMS 62 mv PP / 13 mv RMS 94 mv PP / 16 mv RMS 10 mv PP / 1.5 mv RMS 10 mv PP / 1.5 mv RMS Ripple I 6 ma RMS 1.8 ma RMS 2 ma RMS 8 ma RMS 10 ma RMS 6 ma RMS 6 ma RMS Model PSI DT PSI DT PSI DT PSI DT Voltage V V V V Current A A A A Power W W W W Ripple U 60 mv PP / 9 mv RMS 58 mv PP / 11 mv RMS 62 mv PP / 13 mv RMS 94 mv PP / 16 mv RMS Ripple I 1.8 ma RMS 2 ma RMS 8 ma RMS 10 ma RMS 17

18 Programmable DC laboratory power supplies 160 W W in desktop enclosure PS 3000 C Wide AC input range V AC Flexible output stage Intuitive handling due to colour TFT touch panel Multi-language display Protective features (OVP, OCP, OT ) Optional analog interface Optional USB & Ethernet All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package SCPI & Modbus protocol 40V models (SELV) Desktop enclosure with carrying handle U I P OVP OCP OPP OTP Model PS C PS C PS C PS C PS C PS C PS C PS C PS C AC V, 1ph+N, Hz, power factor >0.99 DC: Voltage rating V V V V V V V V V DC: Current rating A A A A A A A A A DC: Power rating W W W W W W W W W DC: Accuracy of voltage <0.1% of rated value DC: Accuracy of current <0.2% of rated value DC: Accuracy of power <0.5% of rated value C OUT 3005 μf 990 μf 194 μf 3005 μf 990 μf 194 μf 4080 μf 2720 μf 500 μf Cooling Temperature controlled fan Weight 2 kg 2 kg 2 kg 2.5 kg 2.5 kg 2.5 kg 3 kg 3 kg 3 kg Dimensions (W x H x D) 308 x 103 x 325 mm 308 x 103 x 350 mm 18

19 Programmable DC electronic loads 400 W in desktop enclosure EL 3000 B CV CC CP CR OVP OCP OPP OTP Wide AC input range V AC Flexible input stage Intuitive handling due to colour TFT touch panel Multi-language display Function generator for ramps Regulation modes CV, CC, CP and CR Battery test, MPP tracking simulation Protective features (OVP, OCP, OT ) Optional analog interface Optional USB & Ethernet All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package SCPI & Modbus protocol 40V models (SELV) Desktop enclosure with carrying handle Model EL B EL B EL B AC V, 1ph+N, Hz, max. 40 W power consumption DC: Voltage rating V V V DC: Current rating A A A DC: Power rating W W W DC: Resistance Ω Ω Ω DC: Accuracy of voltage <0.1% of rated value DC: Accuracy of current <0.2% of rated value DC: Accuracy of power <0.5% of rated value DC: Accuracy of resistance <1% of rated max. value + 0.3% of current rating Cooling / Weight Temperature controlled fan / 4 kg Dimensions (W x H x D) 308 x 103 x 325 mm 19

20 Programmable electronic DC loads 300 W W in desktop enclosure EL 9000 T EL 9000 DT Wide AC input range V Flexible input stage Intuitive handling due to colour TFT touch panel (PSI) Multilingual display (ger, eng, chin, russ) Extensive function generator Regulation modes CV, CC, CP and CR For photovoltaics and battery tests and more Protective features (OVP, OCP, OT ) USB as standard port Ethernet & analog interface integrated (EL 9000 DT) All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package SCPI & Modbus protocol Enclosures as tower or desktop version Compact size and high performance CV CC CP CR OVP OCP OPP OTP USB LAN Series Power Voltage Current Handle Orientation Optional digital interfaces EL 9000 DT 400 W W V 5-60 A ja lying (DT models) - EL 9000 T 400 W W 80 V / 200 V / 500 V 8 A / 18 A / 45 A nein standing (T model) USB + Ethernet + Analog 20

21 Technical specifications AC DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power DC: Accuracy of resistance Protections Remote sensing Cooling Dimensions (W x H x D) Series EL 9000 DT / Series EL 9000 T V, 1ph+N, Hz, max. 40 W power consumption <0.1% of rated value <0.2% of rated value <0.5% of rated value <1% of rated max. value + 0.3% of current rating Overtemperature, overvoltage, overcurrent, overpower, power fail yes (connector on front side) Temperature controlled fan(s) EL 9000 DT: 308 x 103 x 415 mm EL 9000 T: 92 x 239 x 352 mm Model EL DT EL DT EL DT EL DT EL DT DC: Voltage V V V V V DC: Current A A A A A DC: 25 C W W W W W DC: 40 C W W W W W DC: Resistance Ω Ω Ω Ω Ω Weight ~6.5 kg ~6.5 kg ~6.5 kg ~6.5 kg ~6.5 kg Model EL DT EL DT EL DT EL DT EL DT DC: Voltage V V V V V DC: Current A A A A A DC: 25 C W W W W W DC: 40 C W W W W W DC: Resistance Ω Ω Ω Ω Ω Weight ~7.5 kg ~7.5 kg ~7.5 kg ~7.5 kg ~7.5 kg Model EL T EL T EL T DC: Voltage V V V DC: Current A A A DC: 25 C W W W DC: 40 C W W W DC: Resistance Ω Ω Ω Weight ~7 kg ~7 kg ~7 kg 21

22 Programmable electronic DC loads 600 W W in 19 format EL 9000 B HP EL 9000 B 2Q Wide AC input range V AC Wide choice of voltages, current and powers Flexible input stage Intuitive handling due to colour TFT touch panel with multi lingual display (EL 9000 B HP) Extensive function generator Regulation modes CV, CC, CP and CR For photovoltaics and battery tests and more Protective features (OVP, OCP, OT ) Master-slave feature USB as standard port Plug&Play slot for digital interfaces All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package SCPI & Modbus protocol 2Q models for power extension of the HP models or for two-quadrants operation with power supplies 19 enclosures in 2 CV CC CP CR OVP OCP OPP OTP USB Series Power Voltage Current Display Optional digital interfaces EL 9000 B HP 600 W W V A TFT Touch CAN, Profibus, Profinet, EtherCAT, Ethernet, CANopen, RS232 EL 9000 B 2Q 600 W W V A LEDs CAN, Profibus, Profinet, EtherCAT, Ethernet, CANopen, RS232 22

23 Technical specifications AC DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power DC: Accuracy of resistance Protections Remote sensing Cooling Dimensions (W x H x D) Series EL 9000 B HP / Series EL 9000 B 2Q V, 1ph+N, Hz, max. 80 W power consumption <0.1% of rated value <0.2% of rated value <0.5% of rated value <1% of rated max. value + 0.3% of current rating Overtemperature, overvoltage, overcurrent, overpower, power fail yes (connector on front side) Temperature controlled fans 19" x 2U x 464 mm Model EL B HP EL B 2Q EL B HP EL B 2Q EL B HP EL B 2Q EL B HP EL B 2Q EL B HP EL B 2Q DC: Voltage V V V V V DC: Current A A A A A DC: 25 C W W W W W DC: 40 C W W W W W DC: Resistance Ω Ω Ω Ω Ω U MIN for I MAX (1 ~2.2 V ~2 V ~2 V ~6.5 V ~5.5 V Weight ~9 kg ~9 kg ~9 kg ~9 kg ~9 kg Model EL B HP EL B 2Q EL B HP EL B 2Q EL B HP EL B 2Q EL B HP EL B 2Q EL B HP EL B 2Q DC: Voltage V V V V V DC: Current A A A A A DC: 25 C W W W W W DC: 40 C W W W W W DC: Resistance Ω Ω Ω Ω Ω U MIN for I MAX (1 ~2.2 V ~2 V ~2 V ~6.5 V ~5.5 V Weight ~13 kg ~13 kg ~13 kg ~13 kg ~13 kg (1 Minimum input voltage which is required to draw the max. current 23

24 Programmable electronic DC loads 1,8 kw - 43,2 kw in 19 format EL 9000 B 24U EL 9000 B Wide AC input range V AC Wide choice of voltages, current and powers Flexible input stage Intuitive handling due to colour TFT touch panel (PSI) Multilingual display (ger, eng, chin, russ) Extensive function generator Regulation modes CV, CC, CP and CR For photovoltaics and battery tests and more Protective features (OVP, OCP, OT ) USB as standard port Plug&Play slot for digital interfaces All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package SCPI & Modbus protocol Slave units for power stacking 19" enclosures in 3U or 6U 19" cabinets in 15U or 24U Customer specific cabinet systems up to 480 kw (p. 15) CV CC CP CR OVP OCP OPP OTP USB Series Power (peak) Power (steady) Voltage Current Height Optional digital interfaces EL 9000 B 3U 1,8-7.2 kw kw V A 3U EL 9000 B 6U kw kw V A 6U EL 9000 B 15U kw 10.8 kw - 18 kw V A 15U GPIB, RS232, CAN, CANopen, Ethernet, Profinet, Profibus, ModBus TCP, EtherCAT EL 9000 B 24U kw kw V A 24U 24

25 Technical specifications AC Power consumption DC: Accuracy of voltage DC: Accuracy of current DC: Accuracy of power DC: Accuracy of resistance Protections Remote sensing Cooling Dimensions (W x H x D) Series EL 9000 B V, 1ph+N, Hz 3U models: max. 130 W 6U models: max. 260 W 15U models: max. 390 W 24U models: max. 780 W <0.1% of rated value <0.2% of rated value <0.5% of rated value <1% of rated max. value + 0.3% of current rating Overtemperature, overvoltage, overcurrent, overpower, power fail yes (connector on front side) Temperature controlled fans 3U models: 19" x 3U x 464 mm 6U models: 19" x 6U x 464 mm 15U models: 19 x 15U x 688 mm 24U models: 19 x 24U x 688 mm Model Power max. 21 C Voltage Current Model Power max. 21 C Voltage Current EL B 3U W 1500 W V A EL B 3U W 1500 W V A EL B 3U W 1500 W V A EL B 3U W 1200 W V A EL B 3U W 1200 W V A EL B 3U W 3000 W V A EL B 3U W 3000 W V A EL B 3U W 3000 W V A EL B 3U W 2400 W V A EL B 3U W 2400 W V A EL B 3U W 4500 W V A EL B 3U W 4500 W V A EL B 3U W 4500 W V A EL B 3U W 3600 W V A EL B 3U W 3600 W V A EL B 6U W 9000 W V A EL B 6U W 9000 W V A EL B 6U W 9000 W V A EL B 6U W 7200 W V A EL B 6U W 7200 W V A EL B 15U 21.6 kw kw V A EL B 15U 18 kw kw V A EL B 15U 16.2 kw kw V A EL B 15U 10.8 kw kw V A EL B 15U 10.8 kw kw V A EL B 24U 28.8 kw kw V A EL B 24U 24 kw kw V A EL B 24U 21.6 kw kw V A EL B 24U 14.4 kw kw V A EL B 24U 14.4 kw kw V A EL B 24U 36 kw kw V A EL B 24U 30 kw kw V A EL B 24U 27 kw kw V A EL B 24U 18 kw kw V A EL B 24U 18 kw kw V A EL B 24U 43.2 kw kw V A EL B 24U 36 kw kw V A EL B 24U 32.4 kw kw V A EL B 24U 21.6 kw kw V A EL B 24U 21.6 kw kw V A 25

26 Programmable electronic DC loads, recovering 3,5 W - 15 kw in 19 format Also configurable up to 480 kw in cabinet systems Recovery 95% = 2.85 kw AC DC E.U.T e.g. power supply Consumer e.g. 3 kw ELR 9000 Recovery into the local 230 V grid (ELR) Recovery into 380 V, 400 V or 480 V grids (ELR HP) Wide choice of voltages, current and powers Flexible input stage Intuitive handling due to colour TFT touch panel Multilingual display (ger, eng, chin, russ) Extensive function generator Regulation modes CV, CC, CP and CR For photovoltaics and battery tests and more Protective features (OVP, OCP, OT ) USB port as standard Plug&Play slot for digital interfaces All interfaces galvanically isolated Remote control software (Windows) LabVIEW VI package SCPI & Modbus protocol 19 enclosures in 3U Customer specific cabinets up to 480 kw (p. 15) CV CC CP CR OVP OCP OPP OTP USB Series Power Voltage Current Optional digital interfaces ELR / 7 / 10.5 kw V A GPIB, CAN, CANopen, Ethernet, Profinet, Profibus, ModBus TCP, EtherCAT, RS232 ELR 9000 HP 5 / 10 / 15 kw V A GPIB, CAN, CANopen, Ethernet, Profinet, Profibus, ModBus TCP, EtherCAT, RS232 26

27 Technische Daten Series ELR 9000 Series ELR 9000 HP AC V, 2/3ph+N, Hz V, 2/3ph, Hz DC: Accuracy of voltage <0.2% of rated value <0.2% of rated value DC: Accuracy of current <0.1% of rated value <0.1% of rated value DC: Accuracy of power <1% of rated value <1% of rated value DC: Accuracy of resistance <1% of rated max. value + 0.3% of current rating <1% of rated max. value + 0.3% of current rating Protections Overtemperature, overvoltage, overcurrent, overpower, power fail Overtemperature, overvoltage, overcurrent, overpower, power fail Cooling Temperature controlled fans Temperature controlled fans Weight 3.5 kw models: ca. 17 kg 7 kw models: ca. 24 kg 10.5 kw models: ca. 31 kg 5 kw models: ca. 18 kg 10 kw models: ca. 25 kg 15 kw models: ca. 32 kg Dimensions (W x H x D) 19 x 3U x 609 mm 19 x 3U x 670 mm Model Power Voltage Current Resistance ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω ELR kw V A Ω Model Power Voltage Current Resistance ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω ELR HP kw V A Ω 27

28 Elektro-Automatik Elektro-Automatik Elektro-Automatik Elektro-Automatik Elektro-Automatik Headquarter Vi e r s e n Moscow EA South USA Shanghai We are a global supplier The EA supply chain covers the whole world. Our headquarters site and main research centre is placed directly in the strategic heart of Europe, in Viersen. There, and in our subsidiaries in South Germany, China (Shanghai) and Russia (Moscow), we employ approx. 250 members of staff. They all work to provide the optimal solutions to the requirements of each and every customer, now and in the future. Elektro-Automatik