Left handed Intergraded Nonreciprocating LINCH. Davis Tactical Solutions Patent Number:
|
|
- Rafe Jenkins
- 6 years ago
- Views:
Transcription
1 Left handed Intergraded Nonreciprocating Charging Handle LINCH Davis Tactical Solutions Patent Number:
2 Table of contents 1. PRODUCT OVERVIEW 2. RIFLE COMPATIBILITY 3. OPTICAL RAILS AND ACCESSORIES 4. INSTALLATION INSTRUCTIONS 5. PREVENTIVE MAINTENANCE 6. FAL CHARGING HANDLES INSTALLATION 7. PARTS
3 PRODUCT OVERVIEW THE LEFT HANDED INTERGRADED NON-RECIPROCATING CHARGING HANDLE IS DESIGNED AS A DROP-IN APPLICATION FOR THE KALASHNIKOV RIFLES. THIS CHARGING HANDLE REQUIRES NO MODIFICATIONS TO THE WEAPON SYSTEM. WHEN INSTALLED A PRIMARY AND ALTERNATE MEANS OF OPERATING THE BOLT CARRIER WILL BE ESTABLISHED. THE CHARGING HANDLE IS NON-RECIPROCATING DURING FIRING. ANY MODIFIED FN-FAL CHARGING HANDLE CAN BE UTILIZED. THIS PRODUCT WILL WORK WITH ALL SMALL CALIBERS FOR THE KALASHNIKOV PLATFORM, 5.45X39, 5.56X45, AND THE 7.62X39.
4 THE LINCH COVERS WEIGH 7.25 OUNCES. BULGARIAN RIBBED COVERS WEIGH 3.0 OUNCES. BULGARIAN SMOOTH COVERS WEIGH 4.0 OUNCES.
5 RIFLE COMPATIBILITY THE LINCH TOP COVERS ARE BASED ON BULGARIAN SMOOTH DESIGN. THIS PRODUCT INSTALLS ON MOST KALASHNIKOV RIFLES. THE LENGTH IS TENTATIVELY INCHES. SOME COVERS MAY NEED TO BE FILED DOWN ON THE FRONT EDGE FOR A PROPER FIT. THE WIDTH OUTSIDE DIAMETER IS TENTATIVELY INCHES. SOME KALASHNIKOV COVERS FACILITATE REARS SIGHTS. THIS PRODUCT WOULD NOT BE A DIRECT REPLACEMENT ON THOSE RIFLES.
6 RIFLE COMPATIBILITY THE LINCH WAS DESIGNED TO WORK WITH ALL STANDARD LENGTH KALASHNIKOV RECEIVERS. THIS DISTANCE IS INDICATED FROM THE REAR SIGHT BLOCK TO THE REAR TRUNNION. THE WIDTH OF THE RECEIVER SHOULD BE INCHES.
7 RIFLE COMPATIBILITY LISTING RIFLES CARBINES BULLPUP RPK MACHINE GUNS AK-47 AK-102 WZ-2002-BIN RPK AKM AK-104 WZ-2005-JANTAR RPK-74 AK-101 AK-105 RPKM/RPK-74M AK-103 MPI-AKS-74NK AK-63 PM-MOD-90-CAR AKM-63 PM-MOD-86- CAR AMD-65 TYPE-56C AK-74 AMD-65-CAR SNIPER RIFLE AK-74M WZ-1989-ONYKS MPI-KM TABUK RIFLE MPI-KM-74N PM-MOD-63/65 PM-MOD-90 PM-MOD-86 ROMANIAN WUM/SAR/WASR-ALL TYPE-56 NORINCO-ALL WZ-1960 WZ-1988 TANTAL WIEGER-STG-940
8 RIFLE NON-COMPATIBILITY LISTING RIFLES CARBINES SNIPER RIFLE RPK MACHINE GUNS GALIL ACE ACE-CAR GALATZ ARM AR MAR SR-99 SAR ZASTAVA M-70 M-85 M-76 M-72 M-77 M-92 M-91 M-77 M-90 M-21 VALMET M-76 M-88 M-78 M-82 RK-62 RK-95-TP USSR AK-107/108 AKMSU ROMANIAN PSL NONE AKS-74U SHOT GUNS SAIGA-12 (IZHMASH) NONE
9 OPTICAL RAILS AND ACCESSORIES THE LINCH TOP COVER WILL NOT FUNCTION WITH SIDE MOUNTED OPTICS. THE LINCH IS NON-RECIPROCATING DURING FIRING. ALTHOUGH THE OPTICS CAN BE INSTALLED THE CHARGING HANDLE WILL BE NON-OPERATIONAL. POSP 2.5 X 5 POWER ON AK-74 CLONE WITH LINCH COVER
10 OPTICAL RAILS AND ACCESSORIES MOST LOW MOUNTED OPTICS CAN BE INSTALLED WITH THE LINCH PRODUCT. IF YOU ARE HAVING CLEARANCE ISSUES REMOVE THE LINCH COVER AND REPLACE IT WITH THE STANDARD TOP COVER. THIS SHOULD ONLY TAKE A FEW MINUTES. COBRA REFLEXTIVE SITE ON AK-74 CLONE WITH LINCH COVER
11 OPTICAL RAILS AND ACCESSORIES BERYL STYLE MOUNTS WITH OPTICS CAN BE INSTALLED WITH THE LINCH PRODUCT. IF YOU ARE HAVING CLEARANCE ISSUES RELOCATE YOUR OPTIC OR REPLACE THE CHARGING HANDLE WITH ANOTHER METRIC FN FAL KNOB. ROMAINIAN CLONE 7.62X39 WITH A WARRIOR BERYL MOUNT AND EOTECH REFLECTIVE SIGHT SAIGA 7.62X39 WITH A DOG LEG GEN 1 AND 4 POWER SCOPE
12 OPTICAL RAILS AND ACCESSORIES THE ULTIMAK RAIL SYSTEM WITH OPTICS CAN BE INSTALLED WITH THE LINCH COVERS. THE LINCH WAS DESIGN TO WORK IN CONJUNCTION WITH ULTIMAK RAIL ALLOWING CO-WITNESSING SIGHTS. ULTIMAK RAIL SYSTEM BULGARIAN SLR 106CR 5.56X45 WITH ULTIMAK RAIL AND VORTEX REFLECTIVE SIGHT
13 OPTICAL RAILS AND MOUNTS COMPATIBILITY CHART WARRIOR BERYL MOUNT ULTIMAK RAIL SYSTEM DOG LEG GEN 1 KREBS CUSTOMS RAIL MOUNT
14 INSTALLATION INSTRUCTIONS WARNING! INSURE THE WEAPON SYSTEM IS UNLOADED AND ORIENTATED IN A SAFE DIRECTION. USE SAFE HANDLING PROCEDURES AT ALL TIME. INSTALLING THE LINCH COVER IS THE SAME AS STANDARD COVER INSTALLATION. INSURE THE CHANGING HANDLE IS FORWARD IN A LOCKED POSITION BEFORE INSTALLING. THE CHARGING HANDLE PIN MUST REMAIN IN FRONT OF THE BOLT CARRIER FOR PROPER FUNCTION. FRONT VIEW OF LINCH INTERACTION WITH THE BOLT CARRIER SIDE VIEW OF LINCH CHARGING PIN MAKING CONTACT WITH THE LEFT SIDE OF THE BOLT CARRIER
15 INSTALLATION INSTRUCTIONS WEAPON CLEARING PROCEDURES ORIENTATE THE WEAPON SYSTEM IN A SAFE DIRECTION AT ALL TIMES 1. POINT WEAPON IN A SAFE DIRECTION. 2. PLACE FIRING SELECTOR ON SAFE. (UP POSITION FULL) 3. REMOVE THE MAGAZINE. 4. MOVE THE FIRING SELECTOR TO FIRE. (DOWN POSITION FULL) 5. PULL THE CHARGING HANDLE BACK AND STOP, OBSERVE FOR AN EJECTED ROUND, AND VERIFY THE CHAMBER IS CLEAR. 6. RELEASE THE CHARGING HANDLE. 7. ORIENTATE THE WEAPON IN A SAFE DIRECTION AND SQUEEZE TRIGGER. 8. MOVE THE FIRING SELECTOR TO SAFE. (UP POSITION FULL)
16 REMOVING COVER 1. LEAN THE RIFLE AGAINST A TABLE. 2. HOLDING THE RIFLE BY THE FORWARD PART OF THE BUTT WITH THE RIGHT HAND. 3. DEPRESS THE GUIDE FACE WITH THUMB INTO THE COVER HOLE. 4. RAISE THE COVER WITH THE LEFT HAND.
17 INSTALLING LINCH COVER 1. INSURE THE LINCH CHARGING HANDLE IS IN THE FORWARD POSITION AND FOLDED DOWN BEFORE INSTALLATION. 2. HOLD THE RIFLE BY THE FORWARD PORTION OF THE RECEIVER WITH THE LEFT HAND. 3. WITH THE RIGHT HAND INSERT THE COVER SO THAT ITS FORWARD FACE ENTERS THE SEMICIRCULAR GROVE IN THE REAR SIGHT BASE. 4. MOVE THE COVER FORWARD AS FAR AS POSSIBLE; PRESS THE REAR PORTION OF THE COVER FORWARD AND DOWNWARD; THUS COMPLETING THE INSTALLATION.
18 PREVENTIVE MAINTENANCE INSPECT THE LINCH COVER FOR CRACKS DEEP DENTS IN ALL OPERATIONAL AREAS. MAKE SURE THE SLIDE CHANNEL AND CHARGING SLIDE MOVE PROPERLY. THE CHARGING PIN SHOULD BE TIGHT AND ANGLED BEVELED END DOWNWARD TOWARD THE BOLT CARRIER. UTILIZE A LIGHT COAT OF OIL ON THE LINCH TOP COVER. A CLP, WHITE LITHIUM GREASE, OR REMINGTON TEFLON CAN BE USED IN THE SLIDE CHANNEL. THE LINCH COVER SHOULD BE HELD BY THE GUIDE REAR FACE LUGS, AND THE REAR FACE SHOULD MOVE FORWARD FREELY WHEN THE LUG IS PRESSED BY THE FINGER, AND SHOULD MOVE QUICKLY UNDER THE ACTION OF THE RETURN SPRING WHEN THE LUG IS RELEASED.
19 FAL CHARGING HANDLES INSTALLATION
20 FAL CHARGING HANDLES MODIFICATIONS WARNING! DO NOT USE FULL LENGTH FN FAL CHARGING HANDLES ON THIS PRODUCT. IF THE OPERATOR PULLS THE CHARGING HANDLE BACK WITH THE WEAPON AT THE READY INJURY COULD OCCUR. ALL CHARGING HANDLES SHOULD BE CUT AT INCHES IN LENGTH. THE CHARGING HANDLE USED IN THE LINCH COVER ARE STANDARD DESIGN, WITH THE EXCEPTION OF LENGTH REQUIREMENTS. THE LINCH FOLDING CHARGING HANDLE HAS A BALL PLUNGER TO PROVIDE FORWARD LOCKING DURING OPERATION. THE BALL PLUNGER KEEPS THE CHARGING HANDLE FROM FALLING BACK WHEN THE RIFLE IS ELEVATED DURING ENGAGEMENTS. THE CHARGING PIN IS ALSO DESIGNED FOR A UNIVERSAL FIT FOR METRIC AND INCH PATTERN CHARGING HANDLES. THE METRIC CHARGING HANDLE IS RETAINED ON THE FORWARD POSITION OF THE CHARGING PIN, WHILE THE INCH FOLDING CHARGING HANDLE IS RETAINED TOWARDS THE REAR. (DRAWING 21) THE BEVELED END OF THE CHARGING PIN WILL ALWAYS FACE DOWN TOWARDS THE BOLT CARRIER. (DRAWING 22)
21
22
23
24
25
26 CHARGING HANDLE ASSEMBLY CHARGING HANDLE ASSEMBLY SHOULD NOT BE PERFORMED IN A FIELD ENVIRONMENT. 1. INSERT THE CHARGING SLIDE INTO THE SLIDE CHANNEL AND MOVE THE CHARGING SLIDE BACK TO ALIGN ALL HOLES.(DRAWING 24) 2. MOVE THE CHARGING PIN WITH THE BEVEL DOWN UP THROUGH THE UNDER SIDE OF THE COVER.(DRAWING 25, AREA 6) 3. SECURE THE LINCH COVER ON A FLAT SURFACE AND TAP THE CHARGING PIN INTO THE ALIGNED HOLES.(DRAWING 23) A BRASS PUNCH MAYBE NEEDED WITH A HAMMER. OBSERVE THE MOVEMENT OF THE CHARGING PIN THROUGH THE HOLE AND INSURE PROPER ALIGNMENT. A SMALL SET OF PLIERS CAN BE USED TO TURN THE CHARGING PIN FOR ALIGNMENT ISSUES. 4. THE RETAINING PIN IS INSERTED INTO THE CHARGING HANDLE SLIDE. THIS WILL ALSO REQUIRE A BRASS PUNCH WITH A HAMMER. THE CHARGING HANDLE PIN SHOULD BE TIGHT WITHOUT MOVEMENT.(DRAWING 25, AREA 4) 5. THE CHARGING HANDLE KNOB, SPRING, AND PLUNGER SHOULD BE ASSEMBLED, AND THE PIVOT PIN INSTALLED.(DRAWING 25, AREA 1,2,3,5)
27 PARTS
28 1. CHARGING KNOB 2. PLUNGER SPRING 3. PLUNGER 4. PIVOT PIN 5. CHARGING SLIDE 6. BALL PLUNGER 7. RETAINING PIN 8. CHARGING PIN 9. TOP COVER 10. SLIDE CHANNEL PART NUMBERS
29 DAVIS TACTICAL SOLUTIONS L.L.C. DOUGLAS DAVIS (251) lastroundholdopenak47.com
Assembling an AR-15 Parts CheckList:
Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts.............................. A, A2 & A3 sights............................................. 2-3 BARREL COMPONENTS.........................................
More informationType : Assault rifle Accuracy : -1 Availability : Rare Concealability : Long coat Magazine : 20 Rate of fire : 2/20
CONTEMPORARY ASSAULT RIFLES Assault rifles appeared during World War II. The concept was to give the ground soldier a weapon which could fire rapidly while in close combat, and have good precision for
More informationStandard Direct Impingement AR-15 Parts Check List
Standard Direct Impingement AR-15 s List UPPER RECEIVER COMMON PARTS 1. Select (1) of the following UPPER RECEIVER options: Complete Upper Receiver with Barrel, or Complete Upper Receiver Without Barrel
More informationLatest Press Release. Smart point for wine on weight watchers
corp@stantec.com Latest Press Release Smart point for wine on weight watchers S Phoenix sports equipment and guns for sale classifieds for rifles, bikes, golf clubs, skis, and more. Post ads for free with
More informationPRODUCTS HIGH QUALITY HIGH CAPACITY
PRODUCTS H I G H C A P A C I T Y M A G A Z I N E S HIGH QUALITY HIGH CAPACITY X-5 Fully Loaded Weight: 9mm 1.96 lbs. /.88 KG Fits all MP5 and stamped receiver clones. *May not work in guns that accept
More informationPRECISION REFLEX. Thank you for your past support and we look forward to helping you in the future. Sincerely, All of the staff at PRI
PRECISION REFLEX Precision Reflex, Inc., (PRI) is a family owned business that was started on January 1, 1979, to manufacture shooting accessories for all types of firearms and many different styles of
More informationANNUAL REPORT ON EXPORTS AND IMPORTS OF CONVENTIONAL ARMS, IN ACCORDANCE WITH ARTICLE 13(3) OF THE ARMS TRADE TREATY
GOVERNMENT OF REPUBLIC OF SLOVENIA ANNUAL REPORT ON EXPORTS AND IMPORTS OF CONVENTIONAL ARMS, IN ACCORDANCE WITH ARTICLE 13(3) OF THE ARMS TRADE TREATY REPORT FOR THE CALENDAR YEAR 2017 National Point
More informationSU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355
SU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355 384 357 402 137 103 365 438 367 367 434 294 480 481 202 103 C-BARREL 137 GAS BLOCK FRONT SIGHT 202 RECEIVER RECEIVER SCREW 294 O'RING 355
More informationUnderstanding the Saiga AK-74 Assault Rifle Used in the Dallas Police Shooting
Understanding the Saiga AK-74 Assault Rifle Used in the Dallas Police Shooting Violence Policy Center July 2016 Violence Policy Center www.vpc.org The Saiga AK 74 Assault Rifle On Thursday, July 7, 2016,
More informationPRODUCTS. Quick Start Guide
PRODUCTS Quick Start Guide Safety Warnings Firearm and ammunition handling and use increases exposure to lead and other substances which can be toxic. Please use and maintain firearms and this device in
More informationAbout the Small Arms Survey
About the Small Arms Survey The Small Arms Survey is a global centre of excellence whose mandate is to generate evidencebased, impartial, and policy-relevant knowledge on all aspects of small arms and
More informationHaenel / Schmeisser The "Sturmgewehr" MP 43 MP 44 Stg. 44 assault rifle (Germany)
1 2 Haenel / Schmeisser The "Sturmgewehr" MP 43 MP 44 Stg. 44 assault rifle (Germany) Caliber: 7.92x33 mm (7.92mm Kurz) Action: Gas operated, tilting bolt Overall length: 940 mm Barrel length: 419 mm Weigth:
More informationHow to Assemble the Allegro Tower of Power
How to Assemble the Allegro Tower of Power Prior to assembly, check the parts and components received against the following list. If you are missing any parts, contact the Balanced Body customer service
More informationKNS Precision Inc. Adjustable Gas Piston for AK-47 Family Firearms Installation & Operation User Manual. Patent Pending
KNS Precision Inc. Adjustable Gas Piston for AK-47 Family Firearms Installation & Operation User Manual Patent Pending Safety Notes -Always obey the four laws of gun handling: -Treat every gun as if it
More informationDOLARIAN CAPITAL, INC.
New, Used & Refurbished Weapon Systems www.dolarian.com AMMUNITION HIGH STNADARD A LL RIFLE MANUFACTURED NEW TO U NITED S TATES M ILITARY S PECIFICATIONS COMMANDO 7.5 Barrel Flat Top, 5.56mm NATO, Collapsing
More information39 Jerusalem st. Ono mall, Kiryat Ono Israel Phone: , Fax:
39 Jerusalem st. Ono mall, Kiryat Ono 55423 Israel Phone: +972-3-6326666, Fax: +972-3-6326099 www.gilboa-rifle.com The Gilboa, a new series of military-grade firearms made in Israel, is produced using
More information2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE
2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE THE FUTURE OF THE MSR HAS BEEN REDEFINED. DPMS GII HAS ARRIVED. THE LIGHTEST, MOST RELIABLE, TECHNICALLY ADVANCED.308 MSR. DESIGNED II DOMINATE. DPMS
More informationROCK RIVER ARMS. All prices, configurations and specifications subject to change without notice.
JUNE 2004 ROCK RIVER ARMS Table of Contents RRA Custom 1911 Pistols, Parts & Customizing Services.............. Pages 3 / 6 RRA Custom Carbines & Rifles.................................... Pages 7 / 12
More informationLTC Mark Owens Program Manager
LTC Mark Owens Program Manager AMMO & WEAPONS Visual Augmentation Systems Helmet Mounted Handheld Weapon Mounted Ammo & Weapons Portfolio Sniper Scope w/improved Night Observation Device (INOD) Weapons
More informationCZ-USA SHOTGUN INSTRUCTION MANUAL CZ-USA
CZ-USA SHOTGUN INSTRUCTION MANUAL CZ-USA SAFETY INSTRUCTIONS Over & Under Shotguns ASSEMBLY Over & Under Shotguns USAGE - Detach the forearm from the barrel. CHOKE TUBES 3 Over & Under Shotguns USAGE ASSEMBLY
More informationREPAIR MANUAL URW SERIES. URW-6, 8, 9, 10 & 12 Series Repair Manual
REPAIR MANUAL URW SERIES URW-6, 8, 9, 10 & 12 Series Repair Manual Contents Page 1. Tools Needed for Repair 1 2. Disassembly and Reassembly of the Cam Casing 2-4 3. Disassembly and Reassembly of the Gear
More informationFigure 3-1. MK 67 MOD 7 gun cradle.
CHAPTER 3 GROUND AND VEHICLE MOUNTS The MK 19 is used in either the ground- or vehicle-mount mode. The most often used ground mount is the M3 tripod. The M3 serves as a stable platform when the weapon
More informationSTEYR ARMS 3 SUB-MOA GUARANTEE ON ALL BOLT ACTION RIFLES
STEYR ARMS SUB-MOA GUARANTEE ON ALL BOLT ACTION RIFLES STEYR PISTOLS 4-7 STEYR AUG A3 M1 8-11 STEYR PRECISION RIFLES STEYR PRO THB 13 STEYR SSG 04 14-15 STEYR SSG 08 16-17 STEYR SSG 08-A1 18-19 STEYR HS.50-M1
More informationUNITED STATES PATENT OFFICE
UNITED STATES PATENT OFFICE JOHN M. BROWNING, OF OGDEN, UTAH. FIREARM. 984,519. Specification of Letters Patent. Patented Feb. 14, 1911. Application filed February 17, 19. Serial No. 544,0. 5 To all whom
More informationBallistic Block Penetration Ballistic Testing Test Report Report Date: May 14, 2010 By Sam Raheb
Ballistic Block Ballistic Testing Test Report Report Date: May 14, 2010 By Sam Raheb Customer Rephouse America LLC 995 Alta Mar Terrace, San Jose CA 95126 Phone: 559 840 3546 Mike Brinkers Email: Email:
More informationRichmond County Gunsmithing - Services List and Pricing
Richmond County Gunsmithing - Services List and Pricing This is not a complete set of services provided. Please call for more info. All services require presentation of a valid and current government issued
More informationEcho 1 M16 Rifle Cortesía de Universo Sniper Airsoft,
Echo 1 M16 Rifle Cortesía de Universo Sniper Airsoft, www.universosniperairsoft.com TECHNICAL DATA Magazine Capacity 300 BBs Power Source Electric Muzzle Velocity 350 fps with.2g BBs Accuracy 150 ft (
More informationGS3400 Telescoping System User Assembly and Operation Manual
GS3400 Telescoping System User Assembly and Operation Manual Congratulations on your GearSpace 34 purchase. This cargo carrier is shipped pre-assembled in knock down form for freight shipment with minimal
More informationLTC Mark Owens Program Manager
UNCLASSIFIED SPECIAL OPERATIONS FORCES INDUSTRY CONFERENCE Win Transform People LTC Mark Owens Program Manager AMMO & WEAPONS UNCLASSIFIED DISTRIBUTION A: APPROVED FOR PUBLIC RELEASE Ammo & Weapons Portfolio
More informationCompy Model: HPL-1 Instructions
Compy Model: HPL-1 Instructions Installation Standard kit includes materials needed to convert one side of a typical boat or utility trailer axle spindle(s) up to three axle spindles per side can be manifolded
More informationTransmission Overhaul Procedures-Bench Service
How to Assemble the Lower Reverse Idler Gear Assembly Special Instructions In 1996 Eaton changed the reverse idler system design. In the nut design, the reverse idler bearing was lubricated through a hole
More informationAR HINGE FOLDING STOCK ADAPTER
AR HINGE FOLDING STOCK ADAPTER User s Manual SYLVAN ARMS AR HINGE FOLDING STOCK ADAPTER This product is use for use with buffer adaptable platforms including calibers from 5.56 to.308. www.sylvanarms.com
More informationLone Star Field Products
537 Easy Street, Garland, Texas 75042 www.lonestarfieldproducts.com 972-276-3110 Lone Star Field Products Spec-Rest Sportsman Field & Modular Sniper Optimization Platform MODSOP User s Manual Copyright
More informationFluid-O-Tech ROTOFLOW ROTARY VANE PUMP REBUILD MANUAL
Fluid-O-Tech PUMP TECHNOLOGY AT ITS BEST WWW.FLUID-O-TECH.COM Office: 161 Atwater St., Plantsville, CT 06479 Phone: (860) 276-9270 Fax: (860) 620-0193 ROTOFLOW ROTARY VANE PUMP REBUILD MANUAL 08/09 Ed.,
More informationSmith Enterprise, Inc
Smith Enterprise, Inc M21A5/14SEI, M14-18, and MK14 SEI Programs and Systems Overview January 2008 M21A5/M14SEI OVERVIEW Program Rationale 96,000 Condition Code A M14s in inventory. Will realize significant
More informationCopyright 2013 by Modern Gun School Modern Schools of America P.O. Box 846 St. Albans, VT
Copyright 2013 by Modern Gun School Modern Schools of America P.O. Box 846 St. Albans, VT 05478-0846 Printed in the United States of America. All rights reserved. Modern Gun School Introduction Congratulations
More informationMaintenance Manual. Hydrant Coupler. F250 Series
Hydrant Coupler F250 Series LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical line in the outer margin of the page. When
More informationAimpoint Inc Pricelist North America (US$) Effective January 1, 2015
Aimpoint Inc. 2015 Pricelist North America (US$) Effective January 1, 2015 EAN CONTRACT PRICE Full Size 30mm Sights 12841 PATROL RIFLE OPTIC (PRO) 73 5000 438 339 9 $407.11 200174 AIMPOINT CARBINE OPTIC
More informationMaintenance Information
16572679 Edition 2 May 2014 Air Drill QP Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially
More informationInstallation Manual TWM Performance Short Shifter 2008 Mitsubishi Lancer
Page 1 Installation Manual TWM Performance Short Shifter 2008 Mitsubishi Lancer Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift
More informationREAR STEEL BUMPER INSTALLATION INSTRUCTIONS Runner
REAR STEEL BUMPER INSTALLATION INSTRUCTIONS 2010+ 4Runner Version 2.1.0 - September 2016 Thank you for purchasing the Southern Style OffRoad Toyota 4Runner 5 th Gen Modular Rear Plate Steel Bumper. It
More informationENGINEERED TO OUTPERFORM
ENGINEERED TO OUTPERFORM 2 0 0 9 ENGINEERED TO OUTPERFORM Established in 1988, KWA has been the leading designer and manufacturer of airsoft replica weapons for law enforcement and military training simulations.
More informationINSTALLATION INSTRUCTIONS South Highway 11 Westminster, SC Toll Free (888) (864) FAX (864)
1.0 Purpose: To identify requirements for the replacement of ISS seals, o-ring and installation of gland nut to rod. 2.0 Scope: This instruction applies to the ISS units manufactured at Lift Technologies
More informationMamod SL1K Locomotive Assembly Instructions
Mamod SL1K Locomotive Assembly Instructions LOCOMOTIVE ASSEMBLY INSTRUCTIONS To ensure ease of construction reference to these instructions are essential. All the major parts are in the front of the box
More informationSR 75. Power Steering (Gear Housing) Gear Housing (4WD) REMOVAL AND INSTALLATION OF GEAR HOUSING Remove and install the parts as shown.
STEERING SR75 Gear Housing (4WD) REMOVAL AND INSTALLATION OF GEAR HOUSING Remove and install the parts as shown. SR76 STEERING (MAIN POINT OF REMOVAL AND INSTALLATION) 1. REMOVE RESERVOIR TANK 2. REMOVE
More informationML15. mm х170х70 kg 2,9...3,5. Beech. 5.5mm mm mm mm.25. 9mm bar 260 см 3 compressed air bolt action stock
www.ataman-guns.com ML15 New product mm 1010-1100х170х70 kg 2,9...3,5 4.5mm.177 5.5mm.22 6.35mm.25 7.62mm.30 9mm.35 300 bar 260 см 3 compressed air bolt action stock Beech www.ataman-guns.com mm 710-800х213х72
More information1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns
STEERING COLUMN 1989 STEERING Jeep Steering Columns DESCRIPTION All models use collapsible steering columns. All columns have integral ignition switch and locking device. Optional tilt wheel is available
More information.38 Special The standard sidearm for U.S. aircrews, including helicopter crews. The pistol is also in use by many civilian police forces worldwide.
Revolvers.38 Special The standard sidearm for U.S. aircrews, including helicopter crews. The pistol is also in use by many civilian police forces worldwide. Ammo:.38 Special Wt: 0.5 kg, 0.1 kg per 6 rounds
More information2014 Lancer Systems all rights reserved
2014 Lancer Systems all rights reserved PROPRIETARY NOTICE: This contains Lancer Systems confidential, proprietary and/or competition sensitive data. ITAR NOTICE: Warning This document contains technical
More informationInstallation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#
Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,
More informationREd Dot Scope. Venom red dot
REd Dot Scope Venom red dot The Venom Red Dot combines speed and simplicity in a tiny, powerful package. The 3 MOA dot diameter gets you on target quickly and precisely. Anti-reflective lens coating on
More information351GF-15. Hydrant Coupler INSTALLATION / OPERATION / MAINTENANCE MODEL
INSTALLATION / OPERATION / MAINTENANCE MODEL 351GF-15 Hydrant Coupler 351GF-15 Hydrant Coupler This installation/operation/maintenance guide is designed to provide instructions for the installation operation
More information626F Exit Device Trim Installation Instructions
626F Exit Device Trim Installation Instructions For use with all Yale 7000, 2100, 1800 and 1500 Series Exit Devices (Wood and Metal Doors) Attention Installer Any retrofit or other field modification to
More informationSport Model with an easy-lube spindle
1. List of tools: Back To Top 1. Safety glasses 2. Hammer 3. Brass or aluminum punch 4. channel locks 5. Block of wood or plastic 6. grease gun 7. razor knife 8. 6" long, 2" diameter or 1 ½" diameter pipe
More informationInstallation Instructions INDY SHIFTER Fits: Mustang Fastback & Convertible with MT-82 Transmission Catalog #
Installation Instructions INDY SHIFTER Fits: 2015-2018 Mustang Fastback & Convertible with MT-82 Transmission Catalog # 3916036 Watch our installation video on YouTube WORK SAFELY! For maximum safety,
More informationInstallation Instructions Capacity 10,000 lbs. (100 Series Lift)
Installation Instructions Capacity 10,000 lbs. (100 Series Lift) IMPORTANT Reference ANSI/ALI ALIS, Safety Requirements for Installation and Service of Automotive Lifts before installing lift. OPERATING
More information<< FEATURES AND BENEFITS >>
PISTOL SLIDE MANUAL TABLE OF CONTENTS FEATURES AND BENEFITS... 2 ASSEMBLY AND INSTALLATION...3-4 INSTALLING TRIJICON RMR PLATE... 5 IMPORTANT SAFETY INFORMATION... 6 LIMITED WARRANTY... 7-10
More informationSR 55 POWER STEERING GEAR. POWER STEERING GEAR REMOVAL AND INSTALLATION Remove and install the parts, as shown.
STEERING SR55 GEAR GEAR REMOVAL AND INSTALLATION Remove and install the parts, as shown. SR56 STEERING MAIN POINT OF REMOVAL AND INSTALLATION 1. REMOVE OIL RESERVOIR 2. REMOVE AIR CLEANER ASSEMBLY 3. DISCONNECT
More informationREMOVAL & INSTALLATION
REMOVAL & INSTALLATION Removal 1. Center steering wheel. Disconnect negative battery cable. Remove steering coupling shield (if equipped). Disconnect steering shaft at flexible coupling or pot joint. Note
More informationMIURA II. to quickly select which barrel to shoot first under hunting conditions. The Miura
MIURA II MIURA II: GA and GA, 3 stainless steel receiver, satin walnut The over and under double trigger model is favorite of traditionalists. It s easier to quickly select which barrel to shoot first
More informationThe CBJ Technology. 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball
The CBJ Technology 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball The CBJ Technology CBJ Tech AB has developed the 6.5x25 CBJ Cartridge, which utilizes subcaliber technology (tungsten core projectile inside
More informationSTYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
STYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation, and maintenance.
More informationCJRK Tactical Riflescope Mount
USER MANUAL CJRK Tactical Riflescope Mount SM34004 English ENGLISH FEATURES: Quick detach weaver/picatinny mount Quick detach provides return to zero Cantilever design provides proper eye relief on various
More informationRRA Rifle/Upper Half Identification. RRA Warranty Information. RRA Order/Return Information
MADE IN U.S.A. MADE IN U.S.A. In 1996, brothers Mark and Chuck Larson founded Rock River Arms in an 1,800 square foot shop in Cleveland, Illinois. Mark and Chuck together brought over 40 years of varied
More information1911 CUSTOMIZATION PRICE LIST
1911 CUSTOMIZATION PRICE LIST Pricing effective August 1, 2017 NOTES ON CUSTOM WORK Colt will perform work on 1911 pistols that were manufactured by Colt only. Colt will not perform work on firearms that
More informationNext, set the bar level and tighten it down. Do this on both the driver and passenger sides.
Next, set the bar level and tighten it down. Do this on both the driver and passenger sides. Using two tape measures, measure the outside width at the front and the rear of the tubes. The front dimension
More informationOPERATOR S MANUAL 2200 SERIES LIFT - LIL HOISTER. July 2017
July 2017 OPERATOR S MANUAL 2200 SERIES LIFT - LIL HOISTER! Before operating this lift, read and understand this Operator s Manual. Become familiar with the potential hazards of this unit. Call SUMNER
More information632 Western Avenue Henniker, New Hampshire Tel. (603) Fax (603) POSITION OF THE ROLLER PLATES
POSITION OF THE ROLLER PLATES The roller plate must be positioned as shown. The measurement to both of the roller plates is taken from the face of the kingpin shaft to the inside edge of the roller wheel
More informationSERVICE INSTRUCTIONS D TON
1120 SOUTH CRYSTAL AVE * BENTON HARBOR MI PH: 269-925-7777 FAX: 269-925-6656 SERVICE INSTRUCTIONS D-51223 4 TON TO ASSEMBLE: 1. Check the handle set screw for tightness. CUSTOMER PRE-USE INSTRUCTIONS THE
More informationThe Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM
The Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM 898.00. The Whiskey-3 rifle stock DETAILED DESCRIPTION - Call ~ 01507 343898 or 0774 7771962 The Whiskey-3 Chassis (W3C) (Generation V Chassis)
More informationFig Variable Speed Valve Parts
5 DISASSEMBLY OF VARIABLE SPEED CONTROL VALVE (Seal Replacement with Control Valve in the Bobcat). Remove seat and seat plate (Fig. ).. Remove variable speed control lever linkage rod. 3. Remove temperature
More informationMODELS 3100,3130,3160, 1300, 1330,1360 EXHAUST SYSTEM
MODELS 3100,3130,3160, 1300, 1330,1360 EXHAUST SYSTEM WALBRO CARBURETOR "WA" SERIES MUFFLER REMOVAL CARBURETOR REMOVAL The muffler assembly should beremoved periodically to inspect for excessive carbon
More information1999 F-150/250 Workshop Manual
Page 1 of 30 SECTION 205-03: Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 1999 F-150/250 Workshop Manual DISASSEMBLY AND ASSEMBLY Procedure revision date: 01/08/2003 Axle Front Drive Special Tool(s)
More informationOwner s Manual Electric Swivel
12-225- 11/6/17 1 of 22 Owner s Manual Electric Swivel Onboard Systems International 13915 NW 3rd Court Vancouver, WA 98685 United States of America Cage Code: 1Y921 Toll Free Phone: (8) 275-883 Phone:
More informationTrailGator REAR BUMPER INSTALLATION INSTRUCTIONS Runner
TrailGator REAR BUMPER INSTALLATION INSTRUCTIONS 2010+ 4Runner Version 3.1.0 - December 2018 Thank you for purchasing the Southern Style OffRoad Toyota 4Runner 5 th Gen Modular Rear Plate Steel Bumper.
More informationDISASSEMBLY AND ASSEMBLY
205-03-1 Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 205-03-1 DISASSEMBLY AND ASSEMBLY Axle Front Drive Special Tool(s) 2-Jaw Puller 205-D072 (D97L-4221-A) Special Tool(s) Carrier Bearing Replacer
More information~ ~j)~~ @) A WC (after 5/91) STURMEY ARCHER 3 SPEED COASTER BRAKE S3C
STURMEY ARCHER 3 SPEED COASTER BRAKE A WC (after 5/91) ~ ~j)~~ @@ ~~@~~ @) @@ S3C «~ @OOlQj@l~ 'The lockwasher, brake arm nut and brake arm as a unit may be interchanged. 2Same as AW. 3HSA 469 replaces
More informationLock-N-Load. Powder Measure and Case Activated Powder Drop
Lock-N-Load Powder Measure and Case Activated Powder Drop TABLE OF CONTENTS Chapter 1: Lock-N-Load Powder Measure Page Overview 4 Step 1: Disassemble 4 Step 2: Assemble 5 Step 3: Operate and Adjustment
More informationFirst, check and record the camber and caster readings, they will be adjusted later.
First, check and record the camber and caster readings, they will be adjusted later. The caliper-mounting bosses are machined perpendicular to the spindle so they are an excellent place for the level.
More informationMANUFACTURING CO. THE FIRST NAME IN QUALITY COUPLINGS. Installation, Inspection, Operation & Maintenance Guide. Model 880 Coupling IMPORTANT
MANUFACTURING CO. THE FIRST NAME IN QUALITY COUPLINGS Installation, Inspection, Operation & Maintenance Guide Model 880 Coupling IMPORTANT Read these instructions completely before installing, using or
More informationInstallation Instructions Capacity 10,000 lbs. DP10 (200 Series Lift)
Installation Instructions Capacity 10,000 lbs. DP10 (200 Series Lift) IMPORTANT Reference ANSI/ALI ALIS, Safety Requirements for Installation and Service of Automotive Lifts before installing lift. OPERATING
More informationPage 1 of 26 Oteco Inc. Houston, Texas
Page 1 of 26 Page 2 of 26 1.0 OVERVIEW CONTENTS 2.0 INSTALLATION GUIDELINES 2.1 Preferred Valve Orientation 2.2 Pressure Rating and Orientation of Discharge line 2.3 Reaction Forces and Anchoring of Reset
More informationFig. 1: Exploded view of the 2WD hub and bearings
Page 1 of 8 Front Wheel Bearings REPLACEMENT NOTE: Sodium-based grease is not compatible with lithium-based grease. Read the package labels and be careful not to mix the two types. If there is any doubt
More informationFSG175 FENCE STAPLE GUN
Kencove Farm Fence Supplies 344 Kendall Rd Blairsville, PA 15717 1-800-KENCOVE sales@kencove.com www.kencove.com OPERATING MANUAL FSG175 FENCE STAPLE GUN To reduce the risk of possible injury, read the
More informationAXLE SHAFTS - 2.2L Toyota Celica DESCRIPTION TROUBLE SHOOTING REMOVAL, DISASSEMBLY, REASSEMBLY & INSTALLATION AXLE SHAFTS
AXLE SHAFTS - 2.2L 1994 Toyota Celica 1994 DRIVE AXLES Toyota FWD Axle Shafts Celica 2.2L 4 Cyl DESCRIPTION Axle shafts transfer power from transaxle to the front wheels. Axle shaft consists of axle shaft
More informationStart Up & Troubleshooting Manual. Resfab Equipment Inc. St Jean Sur Richelieu Website: resfab.com
Start Up & Troubleshooting Manual Resfab Equipment Inc. 725 Rossiter St Jean Sur Richelieu 1 450 359 0800 Website: resfab.com Yogurt Blender Service Manual Page SECTION 1: Start Up and Repair... 3 thru
More information*D-1015* D PARTS CHECK F-XX-V & XX-V EXIT DEVICES INSTALLATION INSTRUCTIONS. Customer Service
*D-1015* D-1015 2) TO CHANGE FROM STANDARD LOCKING TRIM TO EITHER NIGHTLATCH FUNCTION OR BLANK ESCUTCHEON, FOLLOW THE PROCEDURE BELOW: A) FOR NIGHTLATCH FUNCTION: 1) REMOVE AXLE SUPPORT ASSEMBLY (WITH
More informationThe steering column is of a modular construction and features easy to service electrical switches.
file://c:\tso\tsocache\vdtom_5368\svk~us~en~file=svkb4a01.htm~gen~ref.htm Page 1 of 3 Section 11-04A: Steering Column, Ranger DESCRIPTION AND OPERATION 1997 Ranger Workshop Manual Steering Column NOTE:
More informationAssembly & Operator s Manual
Assembly & Operator s Manual LiftGator XTR 1200lbs Removable Liftgate TM Visit our website at: www.liftgator.com WARNING: Read the entirety of this manual before using the LiftGator. Failure to do so can
More information2004 Lexus LS430. Submodel: Engine Type: V8 Liters: 4.3 Fuel Delivery: FI Fuel: GAS
2004 Lexus LS430 Submodel: Engine Type: V8 Liters: 4.3 Fuel Delivery: FI Fuel: GAS OVERHAUL If the airbag connector is disconnected with the ignition switch in the ON position, DTCs will be recorded. When
More informationCable Shift Linkage Kit
Cable Shift Linkage Kit INSTALLATION INSTRUCTIONS ididit column to Ford 4R70W/AODE Trans FOR PART NUMBER S: 2801600010, 2802600010 S INCE 1986 www.ididitinc.com 610 S. Maumee St., Tecumseh, MI 49286 PH:
More informationEd Brown Products, Inc Handgun Order Form
Listed below are our standard models. We offer many custom features, and can build a gun to your specifications. Please see the custom option list for popular options and pricing. If an option is not listed,
More informationPARTS TOOLS. Set Screw. Washer (2) Blue Bushing (2) Black Bushing (2) B&M Short Throw Shifter. Jam Nut Grease. Retaining Ring (2) Insert (2)
Installation Instructions SHORT THROW SHIFTER Fits: Porsche Boxter, Boxter S, 911, 996 Cayman & Cayman S models See Application Guide for specific year ranges and engine sizes Catalog # 45135 WORK SAFELY!
More informationFuture infantry squads shall be equipped with lighter, Safer, programmable but more lethal ammunition
Future infantry squads shall be equipped with lighter, Safer, programmable but more lethal ammunition U.S. Army small-arms experts recently laid out a blueprint of future small-arms goals that would equip
More informationInstallation Instructions RD/HD
FISHER ENGINEERING P.O. Box 529 Rockland, Maine 04841 27000 RD/HD 27200 RD/HD August 1, 2001 Lit. No 26916 Installation Instructions 27000 RD/HD Table of Contents Safety Information... 2 Blade, Headgear,
More informationM14 Rifle Item Stock Numbers
M14 Rifle Item Stock Numbers This document is derived from the 02/04/07 draft of the Third Edition of M14 Rifle History and Development by Lee Emerson copyright 2007. Permission is granted to reproduce
More informationInstallation Instructions Z-Gate Shifter
Installation Instructions Z-Gate Shifter Part Number 80681 1998, 2001 by B&M Racing and Performance Products The B&M Z-Gate shifter can be used in vehicles equipped with most popular three speed automatic
More informationActuator Control Manual
Actuator Control Manual Replacement Procedure on a Rotary Vane Actuator with Central Hydraulic System The purpose of this procedure is to guide the replacement of an Actuator Control with standard features.
More informationMICRO WHEN SPEED AND ACCURACY MATTER USER MANUAL
WHEN SPEED AND ACCURACY MATTER USER MANUAL FEATURES AND ADVANTAGES The most cost effective conversion kit. The quickest conversion kit assembly on the market today. Toolless installation and no pistol
More informationREPLACING ROLTEC SPRING ARMS
REPLACING ROLTEC SPRING ARMS NOTICE TO INSTALLER: Even if familiar with hardware, read instructions prior to installation as improvements may be made without notice. Always handle components with care.
More information