Skutt Electric Kilns. Skutt KS and KM Skutt KS and KM Skutt KS and KM Skutt Kilns

Transcription

1 Skutt Electric Kilns Skutt Kilns are known for their solid construction, energy efficient features, and reasonable pricing. They are available in a wide range of sizes and electrical configurations. Featured below are some of the most popular Skutt models. All Skutt Kilns are CSA approved and feature a rugged stainless steel jacket. The sectionalized construction gives fast access to to elements and firebricks for repair, and allows one person to transport a kiln and get through narrow doorways. For ease in firing, every KS kiln comes with an installed Kiln Sitter. For automated firing, Skutt offers the KM models with KilnMaster automatic controller. Two year limited warranty. A brochure is available for all models. Skutt KS and KM A good small kiln designed for the home potter or small studio loads, the can be fired to Cone 10. Reliable and long-lasting. Features 3" firebrick for better insulating properties, faster heat build-up, and even heat distribution from top to bottom. Plugs into a standard 240V wall socket, draws 27.8 amps and 6660 watts. A 40 amp breaker is recommended. Skutt KS and KM The offers nearly twice the volume of the It is a low, wide, easy-loading kiln especially designed for convenience and accessibility. Fires to Cone 10. Chamber has a 22.75" opening and is 18" deep, for a capacity of 4.38 cu. ft. Electrical requirements are 240 volts, 39.4 amps, and 9460 watts. A 50 amp.breaker is recommended. Skutt KS and KM The Cone 10 Skutt is the answer for large studio loads, schools, and the serious amateur who wants professional capacity. This model has chamber dimensions of 22.75" opening, 27" depth, and a capacity of 6.57 cu. ft. It draws watts at 240 volts and 48 amps. A 60 amp breaker recommended. Skutt Kilns Kilns & Accessories, Page 1

2 Skutt Electric Kilns Skutt KS and KM If you're looking for a full-size electric kiln, the Skutt will meet your needs. It has a load capacity of 9.9 cubic feet, making it ideal for schools, community centres, and professional studios. This kiln is rated to Cone 8, and has 3" firebrick. The chamber is 27" deep, has an opening of 28", and a capacity of 9.92 cu. ft. The electrical specifications are 240 volts and 48 amps for a power draw of watts. A 60 amp breaker is recommended. Skutt KS Kilns: with kiln sitter and timer Internal Dimensions Maximum Model Price Width Depth Cubic feet Cone Temp. Weight KS $ " 18" F 160 lbs. KS $ " 18" F 275 lbs. KS $ " 27" F 290 lbs. KS $ " 27" F 400 lbs. Phase and Voltage Notes: Voltage: The standard electric kiln will require 240 single... phase voltage. These are the kilns we stock. Some schools and large buildings may require a 208 volt system. This is a special order from the factory, but at no extra cost. We will check your electrical requirements with you before we fill an order. Phase: Some large buildings have a three phase system. In most cases a single phase kiln can be wired into a 3 phase system. Not all Skutt kilns are available in a 3 phase version. 3 Phase mod is an additional charge. The kilns listed above are thickwalled kilns with 3" firebrick for extra insulation. They include a kiln sitter with timer as standard equipment. Note that electrical plugs are NOT included with and kiln models. For these models, Skutt suggests hard-wiring the kiln into your electrical system instead of using a plug/receptacle. Greenbarn does NOT sell the plugs separately. Replacement Skutt Peephole plugs...$7.25 Replacement Softbrick peephole plugs...$ Phase Modification for KS Kilns...$ Note: for Electrical requirements: - see 3rd page following Note: KS and/or KM kiln. When ordered in single phase, 208 volt specification, it will fire ONLY to a max. of cone 5 due to electrical limitations. For a kiln that goes to cone 10, see the PK type kilns on following page. Skutt Kilns: Manual (KS) Version Kilns & Accessories, Page 2

3 Skutt KilnMaster Electric Kilns Since Skutt introduced their KilnMaster controller, we have found them to grow rapidly in popularity amongst all users. With the KilnMaster you get excellent temperature control, flexible firing programs, convenience, and repeatable results. Use the preset firing programs, or customize your own with the ramp/hold mode. With options to display in either Celcius or Farenheit, a programmable audible alarm, and the option to select a delay for the start of your firing, you can finish firing when it's convenient for you. All Skutt 10 and 12 sided kilns come standard with the Lid Lifter feature, and the Easy View touch pad option can be added to any KM kiln. A brochure is available. Sophisticated Cone Firing Mode Kilnmaster calculates when proper heat work has been achieved. You select the desired Cone and one of three firing speeds, depending on your load. Programmable Ramp/Hold Mode Up to 16 firing segments can control temperature change, end temperature, and holding time. Preheat and Cooling Functions Easily enter preheating segments (180*F soaks) to ensure dry ware. Cool down from your desired cone with control, new features allow you to control your rate of cooling to achieve certain glaze effects. Skutt KM1027 with factory installed KilnMaster controller Skutt KM Kilns: with automatic controller Safety & Diagnostic Features Power failture detection, thermocouple failure detection, microprocessor fault detection. New onboard diagnostic tools allow you to determine if an element needs replacing, and monitor your voltage supply. Internal Dimensions Maximum Model Price Width Depth Cubic feet Cone Temp. Weight New ~> Firebox 8x6LT $ " x 8" 6.5" F 58 lbs. (3 button control) KM $ " 18" F 160 lbs. KM $ " 22" F 180 lbs. KM $ " 18" F 275 lbs. KM $ " 22" F 300 lbs. KM $ " 27" F 320 lbs. KM $ " 18" F 330 lbs. KM $ " 22" F 365 lbs. KM $ " 27" F 400 lbs. KM PK $ " 27" F 410 lbs. KM PK $ " 31" F 450 lbs. KM PK $ x30.75" 27" F 535 lbs. Options for KM Kilns: Type "S" thermocouple (per t/c)...$ Phase Mod, KM Kilns...$70.00 Easy View Panel...$48.00 Kiln Venting...$ please see page 17 Note: KS and/or KM kiln. When ordered in single phase, 208 volt specification, it will fire ONLY to a max. of cone 5 due to electrical limitations. For a kiln that goes to cone 10, see the PK type kilns on following page. Skutt Kilns: Computer (KM) Version Kilns & Accessories, Page 3

4 Skutt Kilns - Wall mount controllers - Separate automatic controllers: mount on the wall beside the kiln (pricing does not include CSA) KM-1 controller $ inquire - single phase, 50 amp controller - these controllers are special order items KM-1 controller $ inquire - 3 phase, 40 amp controller - these controllers are special order items Phase,Voltage, and Plug Notes: Voltage: The standard electric kiln will require 240 single... phase voltage. These are the kilns we stock. Some schools and large buildings may require a 208 volt system. This is a special order from the factory, but at no extra cost. We will check your electrical requirements with you before we fill an order. Phase: Some large buildings have a three phase system. In most cases a single phase kiln can be wired into a 3 phase system. Not all Skutt kilns are available in a 3 phase version. 3 Phase mod is an additional charge. Internal note: CLEARANCES: (recommended by U.S. manufacturer: Skutt) - 18" clearance recommended to non-combustible wall and 36" clearance recommended to combustible wall - check with your locall regulations for your local municipal requirements. - note: gyproc is rated as combustible surface. install Duroc cement board (wonderboard) 1/4" on wall to get back to 18" clearance. Note that electrical plugs are NOT included with and kiln models. For these models, Skutt suggests hard-wiring the kiln into your electrical system instead of using a plug/receptacle. We do NOT sell the plugs separately. Electrician will normally supply the plug/receptacle when installing the kiln. Skutt Kilns: Notes Kilns & Accessories, Page 4

5 Skutt Kilns - Electrical Specifications: 3" wall kilns Model Cone Phase Volts Amps Watts Breaker Notes KM models: automatic KM single phase 240v amp 10 single phase 208v amp note: 3 phase not available on KM818-3 model KM single phase 240v amp 10 single phase 208v amp note: 3 phase not available on KM822-3 model KM single phase 240v amp 10 single phase 208v amp note: 3 phase not available on KM model KM single phase 240v amp 10 single phase 208v amp 10 3 phase 240v amp 10 3 phase 208v amp KM single phase 240v amp 10 single phase 208v amp 10 3 phase 240v amp 10 3 phase 208v amp KM single phase 240v amp 10 single phase 208v amp note: 3 phase not available on KM model KM single phase 240v amp 10 single phase 208v amp - single phase, 208 volt is maximum cone 8 only 10 3 phase 240v amp 10 3 phase 208v amp KM single phase 240v amp 5 single phase 208v amp - single phase, 208 volt is maximum cone 5 only 8 3 phase 240v amp 8 3 phase 208v amp PK models: Production kilns KM PK 10 single phase 240v amp 10 single phase 208v amp 10 3 phase 240v amp 10 3 phase 208v amp KM PK 10 single phase 240v amp 10 single phase 208v amp 10 3 phase 240v amp 10 3 phase 208v amp KM1627PK 10 3 phase 240v amp - available 3 phase only at this time 10 3 phase 208v amp - available 3 phase only at this time note: single phase version of this kiln NOT available yet Also available: low fire version of Oval kiln: Rated to cone 1 only KM PK-LF single phase 240v amp - fires to cone 1 only single phase 208v amp - fires to cone 1 only 3 phase 240v amp - fires to cone 1 only 3 phase 208v amp - fires to cone 1 only ZC models: Zone Control Currently available only on KM model. Not available on KM or on PK kilns. Electrical specifications are the same as regular versions indicated above. Note: For Copper wire sizes and NEMA receptacle configurations, please ask us or see the Skutt kiln brochure at Skutt Kilns: Electrical Specifications Kilns & Accessories, Page 5

6 Skutt Glass Kilns - General specifications Model Price Width Depth Cu.ft Temp Weight Notes Glass kiln models: with KM controller GM 10F with door $ "x 9" 9" F 82 lb - with optional bead door GM 814 $ " 13.5" F 150 lb GM 818 $ " 18" F 147 lb GM 1014 $ " 13.5" F 174 lb GM 22CS $...call 23.5"x 24.5" 13.5" F 257 lb - Not CSA approved GM 1018 $ " 18" F 196 lb GM 1414 $ "x 24.5" 13.5" F 241 lb - lid lifter is included with this model GM $ " 27" F 351 lb - lid lifter is included with this model Also available: GM 10F no door $ "x 9" 9" F 82 lb - without bead door Note: for more information, please see Skutt website at Note: glass kilns are not available with kiln sitters. Available with controllers only. Note: glass kilns are rated to maximum 1800 degrees F., which is about cone 06 Note: 208 volt available on some glass kilns only. 3 phase available on some glass kilns only. Skutt Glass Kilns - Electrical Specifications Model Cone Phase Volts Amps Watts Breaker Notes Glass kiln models: with KM controller GM 10F with door 06 single phase 115v amp note: only available 115 volt. GM 10F no door 06 single phase 115v amp note: only available 115 volt. GM single phase 240v amp GM single phase 208v amp note: 3 phase not available on GM 814 model GM single phase 240v amp GM single phase 208v amp note: 3 phase not available on GM 818 model GM single phase 240v amp GM single phase 208v amp note: 3 phase not available on GM 1014 model GM 22CS 06 single phase 240v amp GM 22CS 06 single phase 208v amp GM 22CS 06 3 phase 240v amp GM 22CS 06 3 phase 208v amp GM single phase 240v amp GM single phase 208v amp note: 3 phase not available on GM 1018 model GM single phase 240v amp GM single phase 208v amp GM phase 240v amp GM phase 208v amp GM single phase 240v amp GM single phase 208v amp GM phase 240v amp GM phase 208v amp Skutt Kilns: Electrical Specifications Kilns & Accessories, Page 6