LONG BATTERY POWER YOUR LIFE

Transcription

1 ONG POER YOUR IFE Your Best Energy Solution IS O 001 T 000 ISO 001 BUREAU VERITAS Certification ISO 001 BUREAU VERITAS Certification OSAS 1 BUREAU VERITAS Certification

2 ISTORY Our expertise comes from our ample experiences Awarded Gold Award for Customer Satisfaction Awarded It is very well Made Taiwan by Mistry of Economic Affairs Obtaed ISO001 International environmental Certificate Obtaed ISO001 International quality management system Certificate Obtaed the approval to become the listed company Taiwan Kung ong was approved to establish Nan Kang Industrial Park Obtaed U mark for US product safety standards Developed Deep-Cycle SA batteries with Materials Research aboratories of the Industrial Technology Research Institute ISO00 International Quality Certificate was obtaed Obtaed VdS German product Safety approval Became a bonded factory and passed National Defense appraisal Taiwan E ONG Vietnam Plant established 01

3 Obtaed the approval to become the listed company Taiwan Obtaed OSAS 1 International Safety Management System Certificate Obtaed CE Certificate for EU product Safety standard e ong Vietnam Co., obtaed VdS German Approval Kung ong Enterprises USA, Inc founded Established the nd Plant (Duc oa) Vietnam where occupies 0,000 square meters Obtaed T000 Quality Management System Certificate Vietnam. Duc oa Plant Phase- production construction fished Duc oa Plant Phase- production construction fished Developed and accomplished Stationary Batteries, MSK & TPK Series. Company sales achieved USD$. million dollars Duc oa Plant Phase-4 production construction fished BI(Busess Intelligence) systems on-le Developed and accomplished ong ife Batteries, P series Duc oa Plant Phase- expansion construction fished Company sales achieved USD$10 million dollars Applied new automatic equipment to production Duc oa Plant Phase- expansion construction 0

4 COMPANY INTRODUCTION Kung ong Batteries Industrial Co., td., an expert manufacturer of lead acid batteries, established sce 10 that owns a bonded factory and is the first bonded factory and publicly traded lead acid battery manufacture on the Taiwan Stock Exchange. In order to diversify our production and expand our market share, we moved our ternational manufacturg division to Vietnam ong An 1. e were the first % owned foreign-funded enterprise to establish a battery factory Vietnam. In 07, we fished construction on our nd plant Duc oa which occupies 0,000 square meters and contues to expand as we are Phase- production construction now. e have ISO001, ISO001, OSAS1 and T000 certificate. ith factories and our rich experience, we can be your best partner of your energy solutions. Besides R&D novation, strict controls over the production procedures are also required for quality assurance. e set up spection stations every part of the manufacturg process, and established strict spection forms for each production procedure to assure the high quality of each product. Our quality policy has won clients trust. Meanwhile, we have been approved and used by several global companies the UPS, Security Alarm, heelchair, and Medical dustries. Many of our customers are the leaders their dustry. Each of our sealed lead acid batteries has received U Certification approval. In addition, there are many items that have gone through the very strict and long German VdS certification testg process. Also our VRA batteries are compatible with global standards such as JIS C70/704, IEC 10-1, IEC 0-1, etc. 0

5 ONG POER YOUR IFE Today, we are an environment, where the carbon dioxide emissions are beg capped by International organizations. Therefore, we play an important role to make more effective, cost-savg, and safe for the environment energy. hile pursug excellence, we also strive to improve employee health, safety and welfare. e provide employees with comprehensive trags and a superior work environment as well as encouragg employees to engage lifetime learng to ga new knowledge and skills. Our prospects are to provide clean energy for global consumers response to the full-blown awareness of social and environmental responsibilities. e will be dynamic and careful protectg the environment as well as facilitatg improvement technology, lettg Taiwan be proud of its dustry as well of its beautiful scenery and its people! 04

6 VRA BATTERIES Construction Specifications Safety valve Termal PositivePlate Negative Plate Separator Contaer Termal Type size:(ch) F1 F F F4 F 4. x x 0.0. x x 0.0 M B / N M B / N M B / N F F7 F F F10 4 M Bolt M Bolt M Nut Ø. F11 F F1 F F M Bolt Ø17. Ø1 F1 F17 M Bolt Ø1 Ø1 M Bolt 0

7 Termal Position Fig 1 Fig Fig Fig 4 Fig Fig Fig 7 Fig Fig Fig 10 Fig 11 Fig Fig 1 Fig Fig 1 Fig 1 Fig 17 Fig 1 Fig 1 Fig Fig 1 Fig Fig Battery Numberg System P. TR Battery Features R: Negative Termal Position N: Type Of Termal, N: Nut E: igh Rate Type For Electric Vehicle : ire ead Type ith Connector A,S,T : Same Capacity ith Different Dimensions or Purpose I: Inner Termal Position : andle Type B: ight Version NF: Car/Motorcycle Type Battery Voltage Battery Capacity At r Rate Battery Type P: Cyclic Type KP: igh Power Type P U1: Sealed Battery ith Conventional Dimension Battery Capacity St /Cell At 1 M Rate Battery Voltage Battery Features : ong ife Type 0

8 RESERVE POER P1.- P4- P4.- P7- P7-S P-A P10- P-S P1- P- P0.7- P0.7-S P1.- P1.-T P.- P.- P.- P.-T P.-TR P- P4- P4.- P- P-B P-SR P- P7.-A P7.- P-A P1- P1- (N) SR P4- (N) P- (N) B P- (N) B VOTAGE (V) CAPACITY (Ah) R R For General Use T OVER EIGT (APPROX.) lbs kg ASSEMBY POSITION () 1 () 1 () 1 () F1-,F+ F ire/a ire/j F F (F) F (F) F (F) F4 (F) RESERVE POER P7.- P- P1-N P1-I P- (N) P-I P-N P- (N) P0-T P40- (N) P4- (N) P0- (N) P- (N) P- (N) NF0C (N) VOTAGE (V) CAPACITY (Ah) R R (10R) For Cyclic Use T OVER EIGT (APPROX.) lbs kg ASSEMBY POSITION 11 1 () 11 1 () 1 () 1 11 () 11 () 11 () 10 () 1 () 11 () F F F (F) F F (F) F (F) F F4 (F) F4 (F) F4 (F) F1 (F) F4 (F) F1 (F) RESERVE POER P1 P1 P4 P7-() VOTAGE (V) CAPACITY(Ah) (1m) (/cell) R For igh Rate, Standby Use T OVER EIGT (APPROX.) lbs kg ASSEMBY POSITION 4 07

9 RESERVE POER For igh Rate, Standby Use P P1 (T) P CAPACITY(Ah) VOTAGE (V) (1m) (/cell) R T OVER EIGT (APPROX.) lbs kg (4.0) (104) ASSEMBY POSITION 11 (F) F RESERVE POER For ong ife Standby Use P KP-N KP7-N KP-AN (AU) KP110-N KP10-N KP10-N P10-N P10-N P0-N P0-N VOTAGE (V) CAPACITY (Ah) R 10R /1m /cell T OVER EIGT (APPROX.) lbs kg ASSEMBY POSITION (10) F F F (F1) F F F Motive Power P-E P10-SE P-E P-N P-SE P-IE P-NE P0-TNE P40-NE P4-NE P0-NE KP7-NE U1- (N) U1-4 (N) U1-4E U1- U1-NE VOTAGE (V) For EV igh Power,Cyclic use CAPACITY (Ah) R R T OVER EIGT (APPROX.) lbs kg ASSEMBY POSITION 11 () () F F F F F F F F F4 (F) F4 (F) F4 F4 F Special Type P0.- P- P0 PA PA P VOTAGE (V) CAPACITY (Ah) R R T OVER EIGT (APPROX.) lbs kg ASSEMBY POSITION ire F1 F1 F1 ire VdS Approved Model 1.For batteries' capacity below 1Ah, all dimensions given are +/- 1 (0.04ches).For batteries' capacity over 1Ah, all dimensions given are +/-1 (+0.0/-0.04ches).Please refer to all the details of the specification sheet. 0

10 CARACTERISTIC Discharge current and fal discharge voltage Discharge Time VS. Discharge Current ( C) (77 C) (v) FOR V FOR V 1.0. Discharge current (A) Fal discharge Voltage(V/cell).0.0 (A) 0.C C < (A) 0.C CA CA 1CA 0.CA 0.4CA 0.CA 0.1CA 0.0CA 0.C < (A).0C > (A).0C mutes hours Discharge Time Effect of Temperature on Capacity C (77 F) (%) Capacity Retention Characteristic 0 Capacity % CA 0.1CA 0.CA 0.CA 1CA CA Remag Capacity (104 ) 0 ( ) 0 ( ) 10 (0 ) ( ) Temperature Storage Time (months) Trickle (or float) Service ife Cycle Service ife ife (years) SA P KP P Capacity % Discharge: 0.17CA. Charge: CV.4V/cell 1 Imax 0.CA. End of life discharge voltage: 1. Vpc 4. Temper ature: ± C Discharge Depth % Discharge Depth 0% Discharge Depth 0% ( ) ( ) Ambient Temperature Number of Cycles (times) 0

11 CARGING METOD APPICATION STANDBY USE CYCE USE Chargg method Constant voltage Settg voltage (v/cell)( C) Temperature factor Max. charge current (CA).~.0 -.0mV/ C/cell 0..40~.0 -.0mV/ C/cell 0. Charge Time Discharge % Discharge 0% 4h h 1h 10h Temperature ( C) -1 C ~ 40 C igh performance and long service life of ONG battery depend upon correct chargg. Improper chargg modes or adequate chargg equipment result decreased battery life and/or unsatisfactory performance. Any of the conventional chargg techniques may be used, but to obta maximum service life and capacity,along with acceptable recharge time, constant current/constant voltage chargg is recoended. A charge quantity of 10-0% of the previous discharged quantity is needed for fully chargg the battery. The chargg voltage of battery decreases with creasg temperature and creases with decreasg temperature. At a temperature below C(41 F) or above C( F), the temperature compensation for chargg voltage is necessary. At ambient temperature the compensation will not be necessary. Overchargg Should be avoided : As a result of too high a charge voltage. excessive current will flow after reachg full charge, causg decomposition of water the electrolyte and, hence, premature agg. Underchargg Should also be avoided : If too low a charge voltage is applied, the charger current output will essentially stop before the battery is fully charged. This allows some of the lead sulfate to rema on the plates which will eventually reduce capacity. RECOMMENDED RECARGING INTERVA & METOD STORAGE TEMPERATURE Below C( F) C-0 C( F- F) above 0 C( F)(avoid this storage condition) RECARGE INTERVA & METOD months, charge for 1 hrs at.4v/cell months, charge T OVER for 1 hrs at EIGT.4V/cell 1 months, charge for 1 hrs at.4v/cell ASSEMBY ANDING INSTRUCTION Do not short the termals. Do not place the battery near or fires. Do not use the battery a contaer or bag without proper ventilation. Operate at a temperature between 1 C to 0 C. But for cycle use, the C to C temperature range is recoended. To properly store the battery, remove battery from equipment or charge and store a dry and cool place. Iediately recharge after dischargg. If sulfuric acid from the battery is spilled on sk or clothg, wash iediately with water. If acid comes contact with eyes, flush with large amounts of water and iediately see a doctor. To obta maximum life, the ripple current at the r.m.s current of the charger should be regulated to less than 0.1 C(A). Avoid mixed use of batteries. Different capacities, histories, or manufacturers of batteries may cause damage to the batteries or other equipment s. 10

12 MSK SERIES CONSTRUCTION SPECIFICATIONS Termal Positive Plate Negative Plate Separator Contaer T MSK Series V Stationary Batteries Kung ong MSK Series of VRA battery is ong Service ife battery with 1 years floatg design life and all models use V0 material for casg. MSK series battery is suitable for the range of applications cludg telecounications, telephony, emergency lightg, distribution systems, railway, airport and seaport signalg, automation and distribution systems. VOTAGE (V) CAPACITY (Ah) R 10R T OVER EIGT (APPROX.) lbs kg ASSEMBY MSK MSKA MSK MSK MSK MSK MSK For MSK series, all dimensions given are +/- (0.ches).Please refer to all the details of the specification sheet. 11

13 Termal Position & Termal Type MSK7 MSKA MSK0 MSK Unit: (ch) 1. (M Bolt) ( 0.) 7 (. 0.) 1. (M Bolt) ( 0.) 7 (. 0.1 ) ± ( ± 0. ) 10 ± (4.17 ± 0. ) (M Bolt) ± (± 0.) 10 ± (.1 ± 0.) (M Bolt) (.07 0.) (.1 0.) (.07 0.) (.1 0.) ± (1.11 ± 0. ) ± (1.1 ± 0. ) MSK00 MSK400 MSK440 ± ( ± 0. ) 10 ± (.1 ± 0. ) (M Bolt) 17 ± (7.7 ± 0. ) ± ( ± 0. ) (M Bolt) 17 ± (7.7 ± 0. ) ± ( ± 0. ) ± (1.11 ± 0. ) ± (1.1 ± 0. ) ± (1.11 ± 0. ) ( ) ± ± ± (1.11 ± 0. ) ± (1.1 ± 0. ) ± (1.11 ± 0.) ± (1.1 ± 0.) (M Bolt) CARACTERISTIC

14 TPK SERIES CONSTRUCTION SPECIFICATIONS Positive Plate Termal Negative Plate Contaer Separator TPK Series V Front Termal Batteries Kung ong TPK Series of VRA Battery is a front termal type battery with years floatg design life and all models use V0 material for casg. TPK series battery can be stalled any location, and guarantees high security and reliability. VOTAGE (V) CAPACITY (Ah) R 10R T OVER EIGT (APPROX.) lbs kg ASSEMBY POSITION TPKA TPK TPK TPK For TPK series, all dimensions given are +/- (0.ches).Please refer to all the details of the specification sheet. 1

15 Termal Position & Termal Type TPKA TPK TPK10 TPK1 Unit: (ch) 07 (1. 0. ) (M Bolt) 10 ( ) (M Bolt) ± ± ± (4. ± 0. ) 0 (1. ) (M Bolt) ± ± ± (4. ± 0. ) 0 (1. ) (M Bolt) 0 ± (1. ± 0. ) 110 ± (4. ± 0. ) ± (. ± 0. ) ± (11.4 ± 0. ) ± (11.4 ± 0. ) ± (11.4 ± 0. ) CARACTERISTIC (%) Capacity Retention Characteristic 0 ( ) Remag Capacity (104 ) 0 ( ) 10 (0 ) ( ) Storage Time (months)

16 Dubai, UAE UAE ONG MIDDE EAST & AFRICA Dubai, Jebel Ali Free Zone ob 1 nd floor office # TE: http: // sales@long.ae Taiwan No., Tzu-i Rd. Nantou City 407, Taiwan TE: FAX: http: // sales@mail.klb.com.tw Vietnam E ONG VIETNAM CO., TD. TE: http: // 1 U S A 01 est Coast ighway STE 0 Newport Beach, CA 0 TE: / FAX: sales@kunglong.com Copyright 1.01 KUNG ONG BATTERIES IND. CO., TD All rights of the manufacturer and of the owner of recorded work reserved. Unauthorized duplication is violation of applicable laws. Manufactured and prted Taiwan. Contents this data sheet are subject to change for improvement without prior notice to users. For clarifications and updated formation, please contact us.