PVC & CPVC Metric Fittings, Unions & Valves

Transcription

1 ount (s): 019 Irrigation Manifolds 080 PVC Schedule 80 Molded Fittings Thru PN16 PVC Metric Fittings 190 Class 10/12 PVC Metric Fittings 191 Metric PVC Molded 280mm & Larger 192 PN16 CPVC Metric Fittings 195 PVC ASTM Schedule 40 Socket x BSP Adapter Fittings (White) 196 PVC ASTM Schedule 40 Socket x BSP Adapter Fittings (Gray) 197 PVC Transition Unions 238 PVC Metric True Union Ball 239 CPVC Metric True Union Ball 228 PVC Metric True Union Ball Check 229 CPVC Metric True Union Ball Check 208 PVC Metric Gate 209 CPVC Metric Gate 274 PVC Metric Diaphragm 276 CPVC Metric Diaphragm 901 Miscellaneous Components Item prices may have changed from those shown in this sheet. See Spears On-line Catalog for most current pricing, updated daily. PVC & CPVC Metric Fittings, Unions & Visit our web site: PRICE SCHEDULE INTL Effective September 26, 2010 Supersedes INTL

2 LIMITED LIFETIME WARRANTY Except as otherwise mandated by law or herein provided, Spears Manufacturing Company ("Company") warrants Standard Catalog Products ("Products") which have been directly manufactured by them to be free from defects in material and workmanship for as long as the original intended end user of the Products ("End User") retains ownership and possession of the Products and complies with this Warranty ("Warranty Period"). other person or entity acquiring or employing the Products, including buyers, contractors and installers ("Buyer") and End Users ("Buyer/End User") agrees that this Warranty shall be effective only during the Warranty Period so long as the Products are used solely for the normal purposes for which they are intended and in conformance with industry established standards, engineering, installation, operating, and maintenance specifications, recommendations and instructions including explicit instructions by the Company; the Products are properly installed, operated and used, and have not been modified; and all the other terms of this Warranty are complied with. Any violation thereof shall void this Warranty and relieve Company from all obligations arising from this Warranty and the Products. Upon receipt or discovery of any Products that appear questionable or defective each Buyer/End User shall promptly inspect and return any such Product to the Company at Olden Street, Sylmar, California 91342, accompanied by a letter stating the nature of any problems. If the Products are determined by Company to be defective in materials or workmanship directly provided by Company, Company, at its sole option, may either repair or replace the defective Products, or reimburse applicable Buyer/End User for the cost of such Products. The applicable Buyer/End User shall bear all applicable shipping costs. THIS SHALL BE BUYERS/END USERS' SOLE REMEDY. EACH BUYER/END USER AGREES THAT COMPANY WILL NOT BE RESPONSIBLE FOR ANY OTHER OBLIGATIONS RELATING TO THE PRODUCTS, INCLUDING ANY OTHER MATERIALS OR LABOR COSTS, LOSS OF USE OR ANY OTHER ITEM OR FOR ANY DELAYS IN COMPLYING WITH THIS WARRANTY BEYOND COMPANY'S REASONABLE CONTROL. COMPANY SHALL NOT BE LIABLE FOR, DOES NOT ASSUME, AND EXPRESSLY DISCLAIMS, ANY LIABILITY, RESPONSIBILITY AND DAMAGES: DUE TO ANY BUYER/END USER'S FAILURE TO COMPLY WITH THIS WARRANTY, INCLUDING IMPROPER INSTALLATION, USE OR OPERATION; USE WITH PRODUCTS FROM OTHER MANUFACTURERS THAT DO NOT MEET ASTM OR OTHER APPLICABLE PRODUCT STANDARDS; IMPROPER CONTROL OF SYSTEM HYDRAULICS, IMPROPER WINTERIZATION PROCEDURES, IMPROPER VOLTAGE SUPPLY, CONTACT WITH INCOMPATIBLE MATERIALS OR CHEMICALS, EXCAVATION/DIGGING, EXCESSIVE WEIGHT, AND VANDALISM; DUE TO REASONABLE WEAR AND TEAR AND DUE TO ANY ACTS OF NATURE, INCLUDING LIGHTNING, EARTHQUAKES, GROUND MOVEMENT, FROST HEAVE, OR FLOODS. COMPANY EXTENDS ONLY THIS WARRANTY AND EXPLICITLY DISCLAIMS ALL OTHER WARRANTIES, WHETHER IMPLIED OR OTHERWISE EXPRESSED, WHETHER ORAL, STATUTORY OR OTHERWISE, INCLUDING ANY IMPLIED WARRANTIES OR AFFIRMATIONS FOR SUITABILITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO AFFIRMATION BY COMPANY OR ANY OF ITS REPRESENTATIVES, BY WORDS, CONDUCT OR OTHERWISE, SHALL CONSTITUTE A WARRANTY. THIS WARRANTY MAY NOT BE TRANSFERRED, EXTENDED, ALTERED OR OTHERWISE MODIFIED IN ANY MANNER, EXCEPT BY WRITTEN AGREEMENT SIGNED BY COMPANY. BY ITS ACCEPTANCE OF THE PRODUCTS, EACH BUYER/END USER EXPRESSLY WAIVES ALL OTHER LIABILITY OR OBLIGATION OF ANY KIND OR CHARACTER OF COMPANY, INCLUDING LIABILITY PREDICATED UPON CONTRACT, TORT, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE GROUNDS, AND ALL, IF ANY, DAMAGES AND LOSSES AS A RESULT THEREOF, INCLUDING ALL, IF ANY, COMPENSATORY, GENERAL, SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGES. WITH RESPECT TO SUCH WAIVERS, EACH BUYER/END USER EXPLICITLY WAIVES CALIFORNIA CIVIL CODE 1542 WHICH STATES "A GENERAL RELEASE DOES NOT EXTEND TO CLAIMS WHICH THE CREDITOR DOES NOT KNOW OR SUSPECT TO EXIST IN HIS FAVOR AT THE TIME OF EXECUTING THIS RELEASE, WHICH IF KNOWN BY HIM MUST HAVE MATERIALLY ADVERSELY AFFECTED HIS SETTLEMENT WITH DEBTOR" AND ALL OTHER SIMILAR STATUTORY, COMMON AND CASE LAW RIGHTS, DEFENSES AND LIMITATIONS. Having previously independently inspected the Products, or a sample, as fully as desired, or having the opportunity to and having not done so, upon acceptance of delivery of the Products, and except as otherwise herein explicitly provided, each Buyer/End User by acceptance or use of the Products accepts them in their "AS IS" and "WITH ALL FAULTS" condition without any other warranty, expressed, implied or otherwise, and accepts and assumes the entire risk and cost of all servicing, remediation and consequences thereof. This Warranty shall be governed by California law and any unenforceable provisions severed without affecting the remaining provisions. As used herein, "including" includes "without limitation." Page 1 Spears Manufacturing Company

3 SPEARS QUALITY POLICY It is the policy and objective of Spears Manufacturing Company to produce a superior quality product suitable for its intended use, with regard to functionality, structural integrity, and conformance to established industry standards and practices. It is the commitment of this Company to do so in a manner which provides consistency of product quality, optimum availability, and superior customer service, while maintaining efficiency of operations and profitability necessary to perpetuate product improvement and customer satisfaction. Furthermore, it is recognized that the attainment of these objectives is the responsibility of all Company operations and personnel according to their respective functions. RECOMMENDATIONS FOR INSTALLERS AND USERS Plastic piping systems should be ENGINEERED, INSTALLED, and OPERATED in accordance with ESTABLISHED DESIGN AND ENGINEERING STANDARDS AND PROCEDURES for plastic piping systems. Suitability for the intended service application should be determined by the installer and/or user prior to installation of a plastic piping system. PRIOR TO ASSEMBLY, all piping system components should be inspected for damage or irregularities. Mating components should be checked to assure that tolerances and engagements are compatible. Do not use any components that appear irregular or do not fit properly. Contact the appropriate manufacturer of the component product in question to determine usability. Consult all applicable codes and regulations for compliance prior to installation. SOLVENT WELD CONNECTIONS Use a quality grade of primer and solvent cement formulated for the type of connection, with the CORRECT SIZE APPLICATOR. Read and follow all of the solvent cement MANUFACTURERS' APPLICATION AND CURE TIME INSTRUCTIONS THOROUGHLY. BEFORE APPLYING PRIMER AND CEMENT, appropriate safety precautions should be taken. Primer and Cement should be stored in the shade between 27 C (40 F) and 43 C (110 F). Eliminate all ignition sources. Avoid breathing of vapors. Use only with adequate ventilation; explosion-proof general mechanical ventilation or local exhaust is recommended to maintain vapor concentrations below recommended exposure limits. In confined or partially enclosed areas, a NIOSH-approved organic vapor cartridge respirator with full face-piece is recommended. Containers should be kept tightly closed when not in use, and covered as much as possible when in use. Avoid frequent contact with skin; wearing PVA coated protective gloves and impervious apron are recommended. Avoid any contact with eyes; splash-proof chemical goggles are recommended. THREADED CONNECTIONS Use a quality grade thread sealant. WARNING: SOME PIPE JOINT COMPOUNDS OR TEFLON PASTES MAY CONTAIN SUBSTANCES THAT COULD CAUSE STRESS CRACKING TO PLASTIC. Spears Manufacturing Company recommends the use of Spears BLUE 75 Thread Sealant which has been tested for compatibility with Spears products. Please follow the sealant manufacturers application/installation instructions. Choice of an appropriate thread sealant other than those listed above is at the discretion of the installer. 1 to 2 turns beyond FINGER TIGHT is generally all that is required to make a sound plastic threaded connection. Unnecessary OVER TIGHTENING will cause DAMAGE TO BOTH PIPE AND FITTING. IMPORTANT WATER HAMMER Spears Manufacturing Company, Inc., recommends that all PVC and CPVC plastic piping systems be designed and constructed to AVOID EXCESSIVE WATER HAMMER. Water hammer can cause damage, and failure to pipe, valves, and fittings within the piping system. PLEASE NOTE When temperatures rise above 23 C (73 F), the tensile strength of thermoplastics decreases, thereby derating the pipe or fitting Maximum Internal Pressure. When temperatures fall below 23 C (73 F), the tensile strength of thermoplastics increases, however, the impact strength decreases. Maximum operating temperatures for PVC piping systems should not exceed 60 C (140 F). Maximum operating temperatures for CPVC piping systems should not exceed 93 C (200 F). CAUTION Spears Manufacturing Company DOES NOT RECOMMEND the use of thermoplastic piping products for systems to transport or store compressed air or gases, or the testing of thermoplastic piping systems with compressed air or gases in above and below ground locations. The use of Spears products in compressed air or gas systems automatically voids Spears warranty for such products, and their use against our recommendation is entirely the responsibility and liability of the installer. Spears Manufacturing Company will not accept responsibility for damage or impairment of its products, or other consequential or incidental damages caused by misapplication, incorrect assembly, and/or exposure to harmful substances or conditions. NOT FOR USE WITH COMPRESSED AIR OR GASES WARNING: DO NOT USE COMPRESSED AIR OR GAS TO TEST ANY PVC OR CPVC THERMOPLASTIC PIPING PRODUCT OR SYSTEM, AND DO NOT USE DEVICES PROPELLED BY COMPRESSED AIR OR GAS TO CLEAR SYSTEMS. THESE PRACTICES MAY RESULT IN EXPLOSIVE FRAGMENTATION OF SYSTEM PIPING AND COMPONENTS CAUSING SERIOUS OR FATAL BODILY INJURY. Made in the U.S.A. Page 2

4 STANDARDS & SPECIFICATIONS ASTM D 2464 Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80. ASTM D 2467 Socket-type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80. ASTM D 1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. ASTM F 1498 Taper Pipe Threads 60 for Thermoplastic Pipe and Fittings. ISO 7/1 Pipe Threads where pressure tight joints are made on the threads - Part 1: Designation, Dimensions and Tolerances. ISO 727 Fittings of Unplasticized Polyvinyl Chloride (PVC-U), Chlorinated Polyvinyl Chloride (PVC-C) with Plain Sockets for pipe under pressure Dimensions of Sockets Metric Series. Fabricated Fittings Certified by NSF International Spears Fabricated Fittings conform to Spears Manufacturing Company Special Engineering Specifications. 150 Series Spears 150 Series conforms to Spears Manufacturing Company Special Engineering Specifications. KEY CODE For your convenience, a DISCOUNT CODE is shown for each part in this price schedule. Please refer to Spears ount Schedule for the corresponding standard discount. ounts are NOT the same for all products. Additional codes are as follows: Packaging s MC = Master Carton (standard master quantity) SP = Standard Pack (standard box quantity) Descriptive s ANSI = American National Standards Institute BAR = 14.5 psi BSP = British Standard Pipe Class 10 = Pressure Rating 10 BAR at 23 C (145 psi at 73 F) Class 12 = Pressure Rating 12 BAR at 23 C (174 psi at 73 F) d = Pipe O.D. in millimeters DN = Diameter Nominal for Metric Fittings Din = Deutsche Industrial Norm (German Standards) IPS = Iron Pipe (ASTM) FIPT = Female Iron Pipe Thread JIS = Japanese Industrial Standard MIPT = Male Iron Pipe Thread NPR = Not Pressure Rated NPT = National Pipe Thread (ANSI) PN7 = Pressure Rating 7 BAR at 23 C (100 psi at 73 F) PN16 = Pressure Rating 16 BAR at 23 C (232 psi at 73 F) Socket = Solvent Weld Socket Spigot = Spigot End (IPS) SRBSP = Special Reinforced BSP Thread FBSP = Female BSP Thread MBSP = Male BSP Thread mm = millimeter ADDITIONAL PUBLICATIONS AVAILABLE Technical Information 40-4 PVC Schedule 40 Fittings Weights & Dimensions 80-4 PVC Schedule 80 Fittings Weights & Dimensions FL-4 Thermoplastic Flanges Technical Weights & Dimensions V-4 Thermoplastic & Engineering Specifications Individual Product Line Data Sheets 40-2 PVC Schedule 40 Fittings 80-2 PVC Schedule 80 Fittings BR-2 PVC & CPVC Transition Fittings SR-2 PVC & CPVC Special Reinforced Female Adapters TU-2 PVC & CPVC True Union Ball CK-2 PVC & CPVC True Union Ball Check DV-2 PVC & CPVC Diaphragm GV-2 PVC & CPVC Gate s subject to change without notice. Possession of this price schedule shall not be construed as an offer to sell the products listed. Product photographs and drawings are representative and may not fully reflect product configurations. Page 3 Spears Manufacturing Company

5 TECHNICAL INFORMATION MATERIALS THERMOPLASTICS UPVC All PVC referenced in this publication is unplasticized PVC, commonly referred to as UPVC. PVC Poly Vinyl Chloride PVC is one of the most specified thermoplastics for piping system components, including valves, fittings, flanges and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters or polar solvents such as ketones. Spears PVC materials conform to ASTM Cell Classification B (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 60 C (140 F). CPVC Chlorinated Poly Vinyl Chloride Chlorinated PVC is used for higher temperature applications than PVC, especially for handling hot corrosive liquids. With similar chemical and corrosion resistance to PVC, increased chlorine content gives CPVC superior thermal resistance. CPVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears CPVC materials conform to ASTM Cell Classification B (formerly designated as Type IV, Grade 1). The maximum recommended service temperature of CPVC products is 93 C (200 F). ELASTOMERS EPR (EPDM) Ethylene propylene rubber Used in O-ring seals, EPR is recommended for water, chlorinated water, dilute acids and alkalines, alcohols, and has excellent resistance to ozone. EPR is not recommended for petroleum oils, di-ester lubricants, strong acids, or strong alkalines. The maximum recommended service temperature of EPR is 149 C (300 F). FPM (Viton ) Fluorocarbon elastomer Viton is a registered trademark of Dupont Dow Elastomers. Used in O-ring seals, FPM exhibits a very broad range of chemical resistance, including petroleum oils, di-ester based lubricants, silicate fluids and greases, halogenated hydrocarbons and mineral acids. FPM is not recommended for ketones, amines, anhydrous ammonia, hot hydrofluoric or chlorosulfonic acids or automotive brake fluids. The maximum recommended service temperature of FPM is 204 C (400 F). NITRILE (Buna-N) Nitrile elastomer Used in O-ring seals, nitrile elastomers are recommended for petroleum oils and fluids, silicone oils and greases, Di-ester based lubricants, ethylene glycol based fluids and cold water. Nitrile is not recommended for phosphate ester hydraulic fluids, halogenated hydrocarbons, strong acids, ketone, ozone or automotive brake fluids. The maximum recommended service temperature of nitrile is 135 C (275 F). IMPORTANT SPECIFICATION STANDARDS ORIGIN Not all metric fitting sizes are the same. Today s global markets have varying standards, norms and interpretations of metric sizing. Identification of the standards origin for which fittings are being specified is essential in assuring that the proper fitting is obtained for each application. METRIC SIZE DIAMETERS: ACTUAL (O.D.) vs. NOMINAL (I.D.) Pipe and fitting sizes are specified according to a diameter. It is important to know if a specification of size is an actual O.D. (d), or a nominal diameter (DN) which is based on pipe I.D. Where applicable, Spears metric socket fittings in this price schedule have size columns to indicate both actual d and nominal DN. It is always best to identify the actual pipe O.D. being used in order to select the proper fitting. THREADS Spears metric thread fittings use BSP (British Standard Pipe) threads designated in inch-sizes, which also conform to ISO 7/1 metric threads. ASTM Iron Pipe (IPS) threads use NPT (National Pipe Thread) threads which are also designated as inch size, conforming to ASTM F BSP threads are not compatible with NPT threads. Made in the U.S.A. Page 4

6 SPEARS METRIC FITTINGS PN16 PVC AND CPVC METRIC FITTINGS (PG 190/192) Injection Molded. Range: 20mm through 63mm socket, actual d 1/2" through 2" threaded Sockets: ISO 727 Threads - BSP: ISO 7/1 Laying Lengths: ISO 264 Pressure Rating: PN16 = 16 BAR at 23 C (232 psi at 73 F) PN10 (CLASS 10/12) PVC METRIC SOCKET FITTINGS (PG 190) Injection Molded. Range: Sockets: Pressure Rating: 160mm and 225mm socket, actual d 73 F) ISO 727 diameters (ASTM D 2467 socket length) 160mm: PN12 = 12 BAR at 23 C (174 psi at 73 F) 225mm: PN10 = 10 BAR at 23 C (145 psi at 73 F) PVC ASTM SCHEDULE 40 SOCKET X BSP ADAPTER FITTINGS (WHITE & GRAY) (PG 195/6) Injection molded. Range: 3/4" through 3" socket x threaded, nominal Sockets: Iron Pipe (IPS) to ASTM D 2466 Threads - BSP: ISO 7/1 Pressure Rating: Designed for use with corresponding size and pressure of ASTM D 1785 Schedule 40 pipe with 50% derating of threaded system. (see ASTM PIPE PRESSURE RATINGS on page 7). Page 5 Spears Manufacturing Company

7 PVC TRANSITION UNIONS (PG 197) Injection molded; specially designed for transitions between ASTM IPS (Iron Pipe ) systems and either ISO (International Standards Organization) metric, or JIS (Japanese Industrial Standards) metric systems. Range: ASTM IPS (inch): 1/2 through 4, nominal connect to ISO Metric (mm): 20mm through 110mm socket, actual d 1/2 through 4 BSP threaded or to JIS Metric (mm): 16mm through 100mm socket, nominal DN Sockets: ASTM IPS (inch): ASTM D 2467 ISO Metric (mm) ISO 727 diameters (ASTM D 2467 socket length) JIS Metric (mm): JIS K6741 diameters (ASTM D 2467 socket length) Threads: NPT: ASTM F 1498 BSP: ISO 7/1 Pressure Rating: 16.2 BAR at 23 C (235 psi at 73 F) PVC & CPVC METRIC VALVES TRUE UNION BALL VALVES & BALL CHECK VALVES (PG 238/239 & 228/229) Range: Sockets: 20mm through 110mm socket, actual d 1/2 through 2 BSP threaded ISO 727 diameters (ASTM D 2467 socket length) Threads - BSP: ISO 7/1 Pressure Rating: 20mm - 62mm 16.2 BAR at 23 C (235 psi at 73 F) 75mm - 110mm 10.3 BAR at 23 C (150 psi at 73 F) GATE VALVES (PG 208/209) Range: Sockets: 20mm through 63mm socket, actual d 1/2 through 2 BSP threaded ISO 727 diameters (ASTM 2467 socket length) Threads - BSP: ISO 7/1 Pressure Rating: 13.8 BAR at 23 C (200 psi at 73 F) Made in the U.S.A. Page 6

8 SCHEDULE 40 & SCHEDULE 80 PIPE DIMENSIONS ASTM STANDARD D 1785 ASTM PIPE PRESSURE RATINGS Nominal Pipe (inch) Mean Outside Diameter (inch) O.D. Tolerance (inch) Minimum Wall Thickness (inch) Schedule 40 Schedule 80 1/ ± / ± ± / ± / ± ± / ± ± ± ± ± ± ± Schedule 40 Schedule 80 Inch mm O.D. psi BAR psi BAR 1/ / / / / Page 7 Spears Manufacturing Company

9 SCHEDULE 40 & SCHEDULE 80 BASIC SOCKET DIMENSIONS ASTM STANDARDS D 2466, D 2467 & F 439 Nominal (inch) Entrance A Diameter Bottom B Tolerance (inch) Socket Length Minimum C 1/ ± / ± ± / ± / ± ± / ± ± ± ± ± ± ± PVC METRIC FABRICATED FITTINGS BASIC SOCKET DIMENSIONS Socket Entrance A Tolerance ± Socket Botttom B Tolerance ± C Socket Depth (Minimum) inch mm inch mm inch mm inch mm inch mm 110mm mm mm mm mm mm mm mm Made in the U.S.A. Page 8

10 AMERICAN NATIONAL STANDARD TAPER PIPE THREADS (NPT) ANSI STANDARD B ASTM STANDARDS D 2464, F 437, F 1498 BSP ISO 7/1 PARALLEL THREADS Nominal (inch) Threads per Inch Effective Thread Length L inches Pitch of Thread P inches Nominal (inch) Threads per Inch Effective Thread Length L mm Pitch of Thread P mm 1/ / / /4 11-1/ /2 11-1/ / / / / / / / STANDARDS COMPARISON JIS K6741 mm DIN 8062 mm Nominal ASTM D 1785 Actual O.D. NPT ANSI B Tapered Thread BSP ISO 7/1 Parallel Thread Nominal Actual O.D. Nominal Actual O.D. inches inches mm Designation Threads per inch Designation Threads per 25.4mm / /2 14 1/ / /4 14 3/ / / /4 11-1/2 1-1/ / /2 11-1/2 1-1/ / Page 9 Spears Manufacturing Company

11 PVC TRANSITION COUPLING JIS Socket (mm) x ASTM Socket (in) CPVC TRANSITION COUPLING (continued) JIS Socket (mm) x ASTM Socket (in) C 50 DN x PN DN x 1/ DN x 3/ DN x DN x 1-1/ DN x 1-1/ DN x PVC UNION VITON Socket PN d d d d d d PVC UNION EPDM Socket PN d d d d d d CPVC TRANSITION COUPLING JIS Socket (mm) x ASTM Socket (in) PN C 16 DN x 1/ C 20 DN x 3/ C 25 DN x C 30 DN x 1-1/ C 40 DN x 1-1/ CPVC UNION VITON Socket PN C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC UNION EPDM Socket PN C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d PVC TEE Socket PN d d d x d PVC 90 ELL Socket PN d d Made in the U.S.A. Page 10

12 PVC 90 ELL (continued) Socket d PVC FLANGE* Van Stone Style ASTM Socket x Multi-bolt Pattern Ring PVC 45 ELL Socket PN d d d PVC REDUCER BUSHING Spigot x Socket PN x 160 d PVC CAP Socket PN d psi M M M * Hubs fit 2", 6" and 8" ASTM IPS pipe. Rings are manufactured to accept bolt patterns in size 2", 6" and 8" in ANSI Class 150, B.S NP10 B.S NP16 (except 8"), B.S. 10 Table D and B.S. 10 Table E. Consult Spears Manufacturing Company Technical Services for additional information. Not for use with wafer valves. PVC FLANGE* Van Stone Style Spigot x Multi-bolt Pattern Ring 150 psi M M M * Spigots fit 2", 6" and 8" ASTM IPS fitting socket. Rings are manufactured to accept bolt patterns in size 2", 6" and 8" in ANSI Class 150, B.S NP10 B.S NP16 (except 8"), B.S. 10 Table D and B.S. 10 Table E. Consult Spears Manufacturing Company Technical Services for additional information. Not for use with wafer valves. CPVC WYE Socket PVC FLANGE* Van Stone Style ASTM Socket x Table D&E Drilling PN C 160 d x 110 d psi DE 3"/80 nom DE 4"/110 nom * Hubs fit 3 or 4 ASTM IPS Pipe. Rings are manufactured to BS 10 Table D & Table E bolt patterns. Page 11 Spears Manufacturing Company

13 PVC FLANGE* Van Stone Style ASTM Spigot x Table D&E Drilling PVC WHITE TEE ASTM Socket x FBSP 150 psi DE 3"/80 nom DE 4"/110 nom * Spigots fit 3 or 4 ASTM IPS fitting sockets. Rings are manufactured to BS 10 Table D & Table E bolt patterns. PVC FLANGE* Van Stone Style ASTM Socket x DIN PN 10/16 Drilling 150 psi DIN 3"/80 nom DIN 4"/110 nom * Hubs fit 3 or 4 ASTM IPS Pipe. Rings are manufactured to DIN PN 10 and PN 16 bolt patterns. PVC FLANGE* Van Stone Style ASTM Spigot x DIN PN 10/16 Drilling 150 psi DIN 3"/80 nom DIN 4"/110 nom * Spigots fit 3 or 4 ASTM IPS fitting sockets. Rings are manufactured to DIN PN 10 and PN 16 bolt patterns. PVC FLANGE* Van Stone Style Metric Socket x Multi Pattern Ring 150 psi d d d d * Hubs are manufactured to fit 160mm - 225mm and 280 mm O.D. Pipe. Rings are manufactured to accept bolt patterns for ANSI Class 150, B.S NP10, B.S NP16 (except 225mm), B.S. 10 Table D (except 280mm) and B.S. 10 Table E. Consult Spears Manufacturing Company Technical Services for additional information. Not for use with wafer valves. SCH / X 3/ /2X X PVC WHITE 90 ELL ASTM Socket x FBSP SCH / X 3/ /2X HDPE BLACK 90 STREET ELL MBSP X FBSP NPR M PVC WHITE RISER EXTENSION MBSP X FBSP SCH / PVC WHITE FEMALE ADAPTER ASTM Socket x FBSP SCH / / Made in the U.S.A. Page 12

14 PVC WHITE FEMALE ADAPTER (continued) ASTM Socket x FBSP PVC WHITE MALE ADAPTER MBSP x ASTM Socket SCH / / / / X3/ PVC GRAY FEMALE ADAPTER (continued) ASTM Socket x FBSP G G 2-1/ PVC GRAY MALE ADAPTER MBSP x ASTM Socket SCH G G 1-1/ G 1-1/ G G 2-1/ G G PVC WHITE FEMALE ADAPTER ASTM Spigot x FBSP PVC GRAY FEMALE ADAPTER ASTM Spigot x FBSP SCH / PVC GRAY TEE Socket SCH G G 1-1/ G 1-1/2X G 2X PVC GRAY FEMALE ADAPTER ASTM Socket x FBSP SCH G G 1-1/ G 1-1/ G G 1-1/ G PVC GRAY TAKE-OFF ADAPTER Spigot x MBSP SCH G 1/ G 3/ G G 1-1/ G 1-1/ G PVC GRAY REDUCING TAKE-OFF ADAPTER Spigot/Socket x MBSP SCH G 1-1/4X1X G 1-1/2X1-1/4X1-1/ Page 13 Spears Manufacturing Company

15 PVC GRAY REDUCING TAKE-OFF ADAPTER (continued) Spigot/Socket x MBSP G 2X1-1/2X1-1/ PVC Transition Union DIN (mm) Soc x ASTM (in.) Fipt with EPDM O-ring Seal PVC Transition Union DIN (mm) Soc x ASTM (in.) Soc with Viton O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) d X 1/ d X 3/ d X d X 1-1/ d X 1-1/ d X d X d X PVC Transition Union DIN (mm) Soc x ASTM (in.) Fipt with Viton O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) d X 1/ d X 3/ d X d X 1-1/ d X 1-1/ d X d X d X PVC Transition Union DIN (mm) Soc x ASTM (in.) Soc with EPDM O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) d X 1/ d X 3/ d X d X 1-1/ d X 1-1/ d X d X d X psi Maximum Internal Pressure 73 F (23 C) d X 1/ d X 3/ d X d X 1-1/ d X 1-1/ d X d X d X PVC Transition Union JIS (mm) Soc x ASTM (in.) Soc with Viton O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) DN X 1/ DN X 3/ DN X DN X 1-1/ DN X 1-1/ DN X DN X DN X PVC Transition Union JIS (mm) Soc x ASTM (in.) Fipt with Viton O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) DN X 1/ DN X 3/ DN X DN X 1-1/ DN X 1-1/ DN X DN X DN X Made in the U.S.A. Page 14

16 PVC Transition Union JIS (mm) Soc x ASTM (in.) Soc with EPDM O-ring Seal PVC Transition Union BSP Thread (in.) x ASTM (in.) Fipt with Viton O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) DN X 1/ DN X 3/ DN X DN X 1-1/ DN X 1-1/ DN X DN X DN X PVC Transition Union JIS (mm) Soc x ASTM (in.) Fipt with EPDM O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) / / / / PVC Transition Union BSP Thread (in.) x ASTM (in.) Soc with EPDM O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) DN X 1/ DN X 3/ DN X DN X 1-1/ DN X 1-1/ DN X DN X DN X PVC Transition Union BSP Thread (in.) x ASTM (in.) Soc with Viton O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) / / / / PVC Transition Union BSP Thread (in.) x ASTM (in.) Fipt with EPDM O-ring Seal 235 psi Maximum Internal Pressure 73 F (23 C) / / / / psi Maximum Internal Pressure 73 F (23 C) / / / / Page 15 Spears Manufacturing Company

17 PVC & CPVC TRUE UNION BALL VALVES (REGULAR STYLE) PVC True Union Ball Valve (Regular Style) DIN SOC EPDM PVC True Union Ball Valve (Regular Style) DIN SOC Viton Pressure 73 F (23 C), Water 2-1/2" - 4" PN 10 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply Rated for Vacuum Service PTFE Seats Not For Use With Compressed Air or Gas PVC True Union Ball Valve (Regular Style) BSP Threaded EPDM / PVC True Union Ball Valve (Regular Style) BSP Threaded Viton / CPVC True Union Ball Valve (Regular Style) DIN SOC EPDM C C C Made in the U.S.A. Page 16

18 CPVC True Union Ball Valve (Regular Style) DIN SOC Viton C C C CPVC True Union Ball Valve (Regular Style) BSP Threaded EPDM C 2 1/ C C CPVC True Union Ball Valve (Regular Style) BSP Threaded Viton C 2 1/ C C Page 17 Spears Manufacturing Company

19 PVC & CPVC TRUE UNION 2000 INDUSTRIAL BALL VALVES Ball DIN SOC EPDM d d d d d d Ball DIN SOC Viton d d d d d d Pressure 73 F (23 C), Water 1/2" - 2" PN 16 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply Rated for Vacuum Service PTFE Seats Locking Handle Not For Use With Compressed Air or Gas Ball BSP Threaded EPDM / / / / Ball BSP Threaded Viton / / / / Made in the U.S.A. Page 18

20 Ball JIS SOC EPDM DN DN DN DN DN DN Ball BSP Threaded EPDM C 1/ C 3/ C C 1-1/ C 1-1/ C Ball JIS SOC Viton DN DN DN DN DN DN Ball BSP Threaded Viton C 1/ C 3/ C C 1-1/ C 1-1/ C Ball DIN SOC EPDM C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d Ball JIS SOC EPDM C 16 DN C 20 DN C 25 DN C 30 DN C 40 DN C 50 DN Ball DIN SOC Viton C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d Ball JIS SOC Viton C 16 DN C 20 DN C 25 DN C 30 DN C 40 DN C 50 DN Page 19 Spears Manufacturing Company

21 PVC & CPVC TRUE UNION 2000 STANDARD BALL VALVES PVC True Union 2000 Standard Ball DIN SOC Viton d d d d d d PVC True Union 2000 Standard Ball BSP Threaded EPDM Pressure 73 F (23 C), Water 1/2" - 2" PN 16 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply PE Seats Not For Use With Compressed Air or Gas PVC True Union 2000 Standard Ball DIN SOC EPDM d d d d d d / / / / PVC True Union 2000 Standard Ball BSP Threaded Viton / / / / PVC True Union 2000 Standard Ball JIS SOC EPDM DN DN DN DN DN DN Made in the U.S.A. Page 20

22 PVC True Union 2000 Standard Ball JIS SOC Viton DN DN DN DN DN DN CPVC True Union 2000 Standard Ball BSP Threaded Viton C 1/ C 3/ C C 1-1/ C 1-1/ C CPVC True Union 2000 Standard Ball DIN SOC EPDM C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC True Union 2000 Standard Ball JIS SOC EPDM C 16 DN C 20 DN C 25 DN C 30 DN C 40 DN C 50 DN CPVC True Union 2000 Standard Ball DIN SOC Viton C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC True Union 2000 Standard Ball JIS SOC Viton C 16 DN C 20 DN C 25 DN C 30 DN C 40 DN C 50 DN CPVC True Union 2000 Standard Ball BSP Threaded EPDM C 1/ C 3/ C C 1-1/ C 1-1/ C Page 21 Spears Manufacturing Company

23 PVC & CPVC TRUE UNION 2000 INDUSTRIAL 3-WAY HORIZONTAL DIVERTER BALL VALVES BALL PORT OPTIONS Pressure 73 F (23 C), Water 1/2" - 2" PN 16 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply Vertical 3-Way or Horizontal Diverter (No Branch Shut-off) All Standard Carton Quantities are one All assembled with Silicone-Free, Water Soluble Lubricant Contact Spears for Pricing on Additional Specialty Available Ball port options viewed from top of valve Not For Use With Compressed Air or Gas 3-Way Horizontal Diverter Ball DIN SOC with L1 Port EPDM 5024L d L d L d L d L d L d Way Horizontal Diverter Ball DIN SOC with L1 Port Viton 5034L d L d L d L d L d L d Made in the U.S.A. Page 22

24 3-Way Horizontal Diverter Ball BSP Threaded with L1 Port EPDM 5025L / L / L L / L / L Way Horizontal Diverter Ball BSP Threaded with L1 Port Viton 5035L / L / L L / L / L Way Horizontal Diverter Ball JIS SOC with L1 Port EPDM 5028L DN L DN L DN L DN L DN L DN Way Horizontal Diverter Ball JIS SOC with L1 Port Viton 5038L DN L DN L DN L DN L DN L DN Way Horizontal Diverter Ball DIN SOC with T1 Port EPDM 5024T d T d T d T d T d T d Way Horizontal Diverter Ball DIN SOC with T1 Port Viton 5034T d T d T d T d T d T d Way Horizontal Diverter Ball BSP Threaded with T1 Port EPDM 5025T / T / T T / T / T Way Horizontal Diverter Ball BSP Threaded with T1 Port Viton 5035T / T / T T / T / T Page 23 Spears Manufacturing Company

25 3-Way Horizontal Diverter Ball JIS SOC with T1 Port EPDM 5028T DN T DN T DN T DN T DN T DN Way Horizontal Diverter Ball JIS SOC with T1 Port Viton 5038T DN T DN T DN T DN T DN T DN Way Horizontal Diverter Ball DIN SOC with L1 Port EPDM 5024L1-005C 20 d L1-007C 25 d L1-010C 32 d L1-012C 40 d L1-015C 50 d L1-020C 63 d Way Horizontal Diverter Ball DIN SOC with L1 Port Viton 5034L1-005C 20 d L1-007C 25 d L1-010C 32 d L1-012C 40 d L1-015C 50 d L1-020C 63 d Way Horizontal Diverter Ball BSP Threaded with L1 Port EPDM 5025L1-005C 1/ L1-007C 3/ L1-010C L1-012C 1-1/ L1-015C 1-1/ L1-020C Way Horizontal Diverter Ball BSP Threaded with L1 Port Viton 5035L1-005C 1/ L1-007C 3/ L1-010C L1-012C 1-1/ L1-015C 1-1/ L1-020C Way Horizontal Diverter Ball JIS SOC with L1 Port EPDM 5028L1-005C 16 DN L1-007C 20 DN L1-010C 25 DN L1-012C 30 DN L1-015C 40 DN L1-020C 50 DN Way Horizontal Diverter Ball JIS SOC with L1 Port Viton 5038L1-005C 16 DN L1-007C 20 DN L1-010C 25 DN L1-012C 32 DN L1-015C 40 DN L1-020C 50 DN Made in the U.S.A. Page 24

26 3-Way Horizontal Diverter Ball DIN SOC with T1 Port EPDM 5024T1-005C 20 d T1-007C 25 d T1-010C 32 d T1-012C 40 d T1-015C 50 d T1-020C 63 d Way Horizontal Diverter Ball DIN SOC with T1 Port Viton 5034T1-005C 20 d T1-007C 25 d T1-010C 32 d T1-012C 40 d T1-015C 50 d T1-020C 63 d Way Horizontal Diverter Ball JIS SOC with T1 Port EPDM 5028T1-005C 16 DN T1-007C 20 DN T1-010C 25 DN T1-012C 30 DN T1-015C 40 DN T1-020C 50 DN Way Horizontal Diverter Ball JIS SOC with T1 Port Viton 5038T1-005C 16 DN T1-007C 20 DN T1-010C 25 DN T1-012C 32 DN T1-015C 40 DN T1-020C 50 DN Way Horizontal Diverter Ball BSP Threaded with T1 Port EPDM 5025T1-005C 1/ T1-007C 3/ T1-010C T1-012C 1-1/ T1-015C 1-1/ T1-020C Way Horizontal Diverter Ball BSP Threaded with T1 Port Viton 5035T1-005C 1/ T1-007C 3/ T1-010C T1-012C 1-1/ T1-015C 1-1/ T1-020C Page 25 Spears Manufacturing Company

27 PVC & CPVC TRUE UNION 2000 INDUSTRIAL 3-WAY VERTICAL BALL VALVES BALL PORT OPTIONS Ball port options viewed from top of valve Pressure 73 F (23 C), Water 1/2" - 2" PN 16 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply Vertical 3-Way or Horizontal Diverter (No Branch Shut-off) All Standard Carton Quantities are one All assembled with Silicone-Free, Water Soluble Lubricant Contact Spears for Pricing on Additional Specialty Available Not For Use With Compressed Air or Gas DIN SOC with L1 Port EPDM 4724L d L d L d L d L d L d DIN SOC with L1 port Viton 4734L d L d L d L d L d L d Made in the U.S.A. Page 26

28 BSP Threaded with L1 Port EPDM 4725L / L / L L / L / L DIN SOC with L2 Port EPDM 4724L d L d L d L d L d L d BSP Threaded with L1 Port Viton 4735L / L / L L / L / L DIN SOC with L2 Port Viton 4734L d L d L d L d L d L d JIS SOC with L1 port EPDM 4728L DN L DN L DN L DN L DN L DN BSP Threaded with L2 Port EPDM 4725L / L / L L / L / L JIS SOC with L1 Port Viton 4738L DN L DN L DN L DN L DN L DN BSP Threaded with L2 Port Viton 4735L / L / L L / L / L Page 27 Spears Manufacturing Company

29 JIS SOC with L2 Port EPDM 4728L DN L DN L DN L DN L DN L DN BSP Threaded with L3 Port EPDM 4725L / L / L L / L / L JIS SOC with L2 Port Viton 4738L DN L DN L DN L DN L DN L DN BSP Threaded with L3 Port Viton 4735L / L / L L / L / L DIN SOC with L3 Port EPDM 4724L d L d L d L d L d L d JIS SOC with L3 Port EPDM 4728L DN L DN L DN L DN L DN L DN DIN SOC with L3 Port Viton 4734L d L d L d L d L d L d JIS SOC with L3 Port Viton 4738L DN L DN L DN L DN L DN L DN Made in the U.S.A. Page 28

30 DIN SOC with T1 Port EPDM 4724T d T d T d T d T d T d JIS SOC with T1 Port EPDM 4728T DN T DN T DN T DN T DN T DN DIN SOC with T1 Port Viton 4734T d T d T d T d T d T d JIS SOC with T1 Port Viton 4738T DN T DN T DN T DN T DN T DN BSP Threaded with T1 Port EPDM 4725T / T / T T / T / T DIN SOC with L1 Port EPDM 4724L1-005C 20 d L1-007C 25 d L1-010C 32 d L1-012C 40 d L1-015C 50 d L1-020C 63 d BSP Threaded with T1 Port Viton 4735T / T / T T / T / T DIN SOC with L1 Port Viton 4734L1-005C 20 d L1-007C 25 d L1-010C 32 d L1-012C 40 d L1-015C 50 d L1-020C 63 d Page 29 Spears Manufacturing Company

31 BSP Threaded with L1 Port EPDM 4725L1-005C 1/ L1-007C 3/ L1-010C 32 d L1-012C 1-1/ L1-015C 1-1/ L1-020C DIN SOC with L2 Port EPDM 4724L2-005C 20 d L2-007C 25 d L2-010C 32 d L2-012C 40 d L2-015C 50 d L2-020C 63 d BSP Threaded with L1 Port Viton 4735L1-005C 1/ L1-007C 3/ L1-010C L1-012C 1-1/ L1-015C 1-1/ L1-020C DIN SOC with L2 Port Viton 4734L2-005C 20 d L2-007C 25 d L2-010C 32 d L2-012C 40 d L2-015C 50 d L2-020C 63 d JIS SOC with L1 Port EPDM 4728L1-005C 16 DN L1-007C 20 DN L1-010C 25 DN L1-012C 32 DN L1-015C 40 DN L1-020C 50 DN BSP Threaded with L2 Port EPDM 4725L2-005C 1/ L2-007C 3/ L2-010C L2-012C 1-1/ L2-015C 1-1/ L2-020C JIS SOC with L1 Port Viton 4738L1-005C 16 DN L1-007C 20 DN L1-010C 25 DN L1-012C 30 DN L1-015C 40 DN L1-020C 50 DN BSP Threaded with L2 Port Viton 4735L2-005C 1/ L2-007C 3/ L2-010C L2-012C 1-1/ L2-015C 1-1/ L2-020C Made in the U.S.A. Page 30

32 JIS SOC with L2 Port EPDM 4728L2-005C 16 DN L2-007C 20 DN L2-010C 25 DN L2-012C 30 DN L2-015C 40 DN L2-020C 50 DN BSP Threaded with L3 Port EPDM 4725L3-005C 1/ L3-007C 3/ L3-010C L3-012C 1-1/ L3-015C 1-1/ L3-020C JIS SOC with L2 Port Viton 4738L2-005C 16 DN L2-007C 20 DN L2-010C 25 DN L2-012C 30 DN L2-015C 40 DN L2-020C 50 DN BSP Threaded with L3 Port Viton 4735L3-005C 1/ L3-007C 3/ L3-010C L3-012C 1-1/ L3-015C 1-1/ L3-020C DIN SOC with L3 Port EPDM 4724L3-005C 20 d L3-007C 25 d L3-010C 32 d L3-012C 40 d L3-015C 50 d L3-020C 63 d JIS SOC with L1 Port EPDM 4728L3-005C 16 DN L3-007C 20 DN L3-010C 25 DN L3-012C 30 DN L3-015C 40 DN L3-020C 50 DN DIN SOC with L3 Port Viton 4734L3-005C 20 d L3-007C 25 d L3-010C 32 d L3-012C 40 d L3-015C 50 d L3-020C 63 d JIS SOC with L3 Port Viton 4738L3-005C 16 DN L3-007C 20 DN L3-010C 25 DN L3-012C 30 DN L3-015C 40 DN L3-020C 50 DN Page 31 Spears Manufacturing Company

33 DIN SOC with T1 Port EPDM 4724T1-005C 20 d T1-007C 25 d T1-010C 32 d T1-012C 40 d T1-015C 50 d T1-020C 63 d JIS SOC with T1 Port EPDM 4728T1-005C 16 DN T1-007C 20 DN T1-010C 25 DN T1-012C 30 DN T1-015C 40 DN T1-020C 50 DN DIN SOC with T1 Port Viton 4734T1-005C 20 d T1-007C 25 d T1-010C 32 d T1-012C 40 d T1-015C 50 d T1-020C 63 d JIS SOC with T1 Port Viton 4738T1-005C 16 DN T1-007C 20 DN T1-010C 25 DN T1-012C 30 DN T1-015C 40 DN T1-020C 50 DN BSP Threaded with T1 Port EPDM 4725T1-005C 1/ T1-007C 3/ T1-010C T1-012C 1-1/ T1-015C 1-1/ T1-020C BSP Threaded with T1 Port Viton 4735T1-005C 1/ T1-007C 3/ T1-010C T1-012C 1-1/ T1-015C 1-1/ T1-020C Made in the U.S.A. Page 32

34 PVC & CPVC TRUE UNION 2000 BALL CHECK VALVES PVC True Union 2000 Ball Check DIN SOC EPDM d d d d d d PVC True Union 2000 Ball Check DIN SOC Viton Pressure 73 F (23 C), Water 1/2" - 2" PN 16 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply Rated for Vacuum Service All assembled with Silicone-Free, Water Soluble Lubricant Contact Spears for Pricing on Additional Specialty Available Not For Use With Compressed Air or Gas d d d d d d PVC True Union 2000 Ball Check BSP Threaded EPDM / / / / PVC True Union 2000 Ball Check BSP Threaded Viton / / / / Page 33 Spears Manufacturing Company

35 PVC True Union 2000 Ball Check JIS SOC EPDM DN DN DN DN DN DN CPVC True Union 2000 Ball Check BSP Threaded EPDM C 1/ C 3/ C C 1-1/ C 1-1/ C PVC True Union 2000 Ball Check JIS SOC Viton DN DN DN DN DN DN CPVC True Union 2000 Ball Check BSP Threaded Viton C 1/ C 3/ C C 1-1/ C 1-1/ C CPVC True Union 2000 Ball Check DIN SOC EPDM C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC True Union 2000 Ball Check JIS SOC EPDM C 16 DN C 20 DN C 25 DN C 30 DN C 40 DN C 50 DN CPVC True Union 2000 Ball Check DIN SOC Viton C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC True Union 2000 Ball Check JIS SOC Viton C 16 DN C 20 DN C 25 DN C 30 DN C 40 DN C 50 DN Made in the U.S.A. Page 34

36 PVC & CPVC GATE VALVES PVC Gate DIN SOC Buna-N d d d d d d PVC Gate DIN SOC EPDM d d d d d d Pressure 73 F (23 C), Water 1/2" - 2" PN 16 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply All assembled with Silicone-Free, Water Soluble Lubricant Not For Use With Compressed Air or Gas PVC Gate DIN SOC Viton d d d d d d PVC Gate BSP Threaded Buna-N / / / / Page 35 Spears Manufacturing Company

37 PVC Gate BSP Threaded EPDM CPVC Gate BSP Threaded EPDM / / / / C 1/ C 3/ C C 1-1/ C 1-1/ C PVC Gate BSP Threaded Viton CPVC Gate BSP Threaded Viton / / / / C 1/ C 3/ C C 1-1/ C 1-1/ C CPVC Gate DIN SOC EPDM C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC Gate DIN SOC Viton C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d Made in the U.S.A. Page 36

38 PVC & CPVC TRUE UNION 2000 DIAPHRAGM VALVES PVC True Union 2000 Diaphragm DIN SOC EPDM d d d d d d PVC True Union 2000 Diaphragm DIN SOC Viton d d d d d d PVC True Union 2000 Diaphragm BSP Threaded EPDM Pressure 73 F (23 C), Water 1/2" - 2" PN 16 Maximum Service Temperature PVC = 140 F (60 C) CPVC = 200 F (93 C) Pressure Deratings Apply No Lubricants in Media Contact Area Not For Use With Compressed Air or Gas / / / / PVC True Union 2000 Diaphragm BSP Threaded Viton / / / / Page 37 Spears Manufacturing Company

39 PVC True Union 2000 Diaphragm JIS SOC EPDM DN DN DN DN DN DN CPVC True Union 2000 Diaphragm BSP Threaded EPDM C 1/ C 3/ C C 1-1/ C 1-1/ C PVC True Union 2000 Diaphragm JIS SOC Viton DN DN DN DN DN DN CPVC True Union 2000 Diaphragm BSP Threaded Viton C 1/ C 3/ C C 1-1/ C 1-1/ C CPVC True Union 2000 Diaphragm DIN SOC EPDM C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC True Union 2000 Diaphragm JIS SOC EPDM C 16 DN C 20 DN C 25 DN C 32 DN C 40 DN C 50 DN CPVC True Union 2000 Diaphragm DIN SOC Viton C 20 d C 25 d C 32 d C 40 d C 50 d C 63 d CPVC True Union 2000 Diaphragm JIS SOC Viton C 16 DN C 20 DN C 25 DN C 32 DN C 40 DN C 50 DN Made in the U.S.A. Page 38

40 PVC IRRIGATION MANIFOLD SYSTEMS Manifold Coupling Swivel x MBSP with O-ring Seal Manifold Tee Swivel x MBSP x Swivel with O-ring Seal MA BT PVC Manifold Tee Soc (Spig) x MBSP x Swivel with O-ring Seal For Solvent Cement Connection MA BT Manifold 90 Street Ell MBSP x Swivel with O-ring Seal MA BT Manifold 90 Ell Swivel x Swivel with O-ring Seal MA Manifold Cross Swivel x MBSP x Swivel x Swivel with O-ring Seal MA BT PVC Manifold Coupling Swivel x Soc (Spig) with O-ring Seal For Solvent Cement Connection MA (1-1/4) Manifold Insert Coupling Swivel x Barbed Insert with O-ring Seal MA Manifold Cap with O-ring Seal MA Manifold Nipple MBSP x MBSP with O-ring Seal MA BT Manifold Replacement O-ring MA BT MA Manifold Coupling Swivel x Swivel with O-ring Seal MA Page 39 Spears Manufacturing Company