MPB040-E Motorized Hand Low Lift Pallet Trucks

Transcription

1 MPB040-E Motorized Hand Low Lift Pallet Trucks ,000 lbs Yale motorized hand trucks combine the latest in state-of-the-art technology and ergonomics making Yale the leader for walkie applications. Controls The ergonomically designed handle minimizes wrist movement and provides a solid grip for additional control while operating the unit. Lift, Lower, and Horn pushbuttons are conveniently located at the operator s fingertips. The butterfly throttle control provides multiple grip positions minimizing operator fatigue while allowing travel direction and speed to be selected by rotating the actuator in the desired direction of travel. Maneuverability and the operating position are optimized for transporting loads by the bottom-mounted control handle. hen positioning loads in confined spaces, the standard Creep Speed Button allows the truck to be operated at limited speeds with the control handle in the full upright, vertical position. The Traction Reversing Switch located on top of the handle simultaneously reverses truck direction and sounds the horn should it come in contact with the operator. The wrap around design provides a large area of contact for the operator. User Selectable Performance Modes The truck has a choice of three pre-programmed performance modes that are selectable through the control handle. These modes alter the acceleration, deceleration and top speed of the truck, enabling the performance of the truck to be optimized for the particular work environment or the work cycle. Mode 1 Economy mode (battery saver) Soft acceleration; reduced top travel speed with auto deceleration Mode 2 Performance with auto deceleration Medium acceleration; reduced top travel speed with auto deceleration Mode 3 Performance without auto deceleration Maximum acceleration; maximum top travel speed without auto deceleration n additional custom performance mode is available and can be configured by your local Yale Dealer. Electrical System The MPB electrical system is designed with uptime and reliability in mind. Industry leading technology, Serial Bus Communications, Hall Effect Sensors, Proximity Switches and Transistor Controllers are incorporated into the design, reducing the number of wires, connectors, switches and contactors. The 150 amp rated MOSFET Transistor motor controller in conjunction with the Separately Excited Motor (SEM) provides enhanced performance and battery efficiency in combination with higher top speeds when loaded and improved acceleration. The controller has onboard diagnostics and comes standard with an LED fault indicator. n optional display gauge is available. Programmable features include, top speed, acceleration rate and auto deceleration. The motor controller also provides an integral transistorized lift pump motor control, eliminating the lift pump contactor. Low battery lift interrupt without display is standard. Traction System The traction system consists of the traction motor, gearbox, and brake. The UL listed traction motor is enclosed to shield it from contamination and comes standard with premium brushes. The proven gearbox design includes greasable steer bearings and heat treated gears that are lubricated in an oil bath to provide long life. The maintenance free electromechanical brake is mounted on the inboard side of the traction motor and is shielded by the gearbox housing protecting it from debris and contamination. Hydraulic Components The lift pump and motor assembly features a 1.0 kw permanent magnet motor and translucent hydraulic tank. The permanent magnet motor provides high efficiency and low noise. The translucent tank provides quick and easy inspection of hydraulic oil level. Soft start of the hydraulic motor is provided through the Transistor controller. (continued on back page) Truck shown with optional equipment

2 o o 48.3 (1226) FORKS RISED 10.6 (269) 31.5 (805) 10 o Y 5.0 LIFT (127) 8.3 (211) RUBBER DRIVE TIRE 9.0 x (89) 6.5 (166) D B C X 3.25 (83) E RIGHT NGLE STCK 40.0 (1016) IDE LOD OTR (h) 1.0 (25) BETEEN LODS b 29.2 (742) a OTR (b) 7.2 (183) FORKS LOERED F EQUL INTERSECTING ISLE 40.0 (1016) IDE LOD Short E 8.6 (218) 5.2 (132) FORKS RISED FORKS LOERED Dimensions displayed in inches. Dimensions in parenthesis represent millimeters.

3 MPB040-E isle Layout Dimensions Dimension Description Fork Position Dimensions - Inches (Millimeters) Standard Fork Tip Short E 1 B Fork Length heel Base Nominal 36 (900) 42 (1050) 48 (1200) 48 (1200) ctual 35.4 (899) 41.3 (1049) 47.2 (1199) 45.2 (1148) Raised 39.7 (1008) 45.6 (1158) 51.5 (1308) 51.5 (1308) Lowered 43.1 (1095) 49.0 (1245) 54.9 (1395) 54.9 (1395) C Overall Length 56.8 (1442) 62.7 (1592) 68.6 (1742) 66.6 (1691) D Chassis Length 21.4 (544) 21.4 (544) 21.4 (544) 21.4 (544) OTR (b) OTR (h) Outside Turning Radius (bumper) Outside Turning Radius (handle) Raised 46.2 (1174) 52.1 (1324) 58.0 (1474) 58.0 (1474) Lowered 49.6 (1261) 55.6 (1411) 61.5 (1561) 61.5 (1561) Raised 47.5 (1206) 53.4 (1356) 59.3 (1506) 59.3 (1506) Lowered 50.9 (1293) 56.8 (1443) 62.7 (1593) 62.7 (1593) E Right ngle Stack (aisle) Raised 61.5 (1562) 66.5 (1689) 71.3 (1810) 69.0 (1753) Right ngle Stack (truck) Raised (2550) 95.0 (2413) F Equal Intersecting isle 52.5 (1334) 54.9 (1394) 57.5 (1460) 56.0 (1422) 67% 67% 67% 67% X % Grade Clearance 2 Raised 40% 34% 30% 30% Y 33% 33% 33% 33% 1 Short Fork Tip fork length for handling 40 x 48 pallets 2 Measured to the bottom of a GM approved pallet on the forks while they are in the raised position Fork Dimensions Dimension Description Dimensions - Inches (Millimeters) a b Fork Spread Over ll idth Fork idth (Each) Nominal 18 (460) 22.0 (560) 27 (670) ctual 18.1 (460) 22.0 (560) 26.4 (670) Nominal 7.0 (170) ctual 6.9 (170) Battery and Compartment Specifications Battery Capacity mp-hours (6 hr rate) KH Battery Connector Dimensions - Inches (Millimeters) X Y Z eight lbs. (kg) Standard Battery Pack with 12 mp Charger amp X Type Red 28.4 (721.4 mm) 7.9 (200.7 mm) 23.9 (607.1 mm) 310 lbs. (140 kg) GNB PalletPro TM Battery Pack with 25 mp Charger amp Red 27.3 (693.4 mm) 7.5 (190.5 mm) 26.4 (670.6 mm) 375 lbs. (171 kg) Notes: 1) Battery well 28.5 (724 mm) x 8.1 (206 mm) x Open. Battery size is limited by rounded corners of battery compartment. Maximum width and length dimensions cannot be used in conjunction with each other. 2) Cable lead position B 3) 16 cable length 4) Maximum cable gauge of 1/0

4 (continued from front page) Forks and Frame Robotically welded steel forks are formed and fabricated for strength and rigidity and include 1.25 x 1.25 push rods. The rugged gearbox is surrounded by a protective steel bumper. ll frame pivot points are equipped with heat treated, nickel plated linkage pins to resist corrosion. High pressure grease fittings are standard. Pallet Entry and Exit Yale fork design provides industry leading pallet entry and exit. The pallet entry/exit system consists of a tapered fork nose and pallet exit roller. heels, Tires, and Casters The standard load wheel configuration is a single load wheel with two roller bearings for long life. knock-out axle provides for quick and easy maintenance. 9 x 5 press-on rubber drive tire is standard. The drive wheel is secured to the drive axle with 5 bolts. Battery Pack and Charger The battery pack consists of four premium 6 volt, deep-cycle flooded cell batteries, an integral 12 amp smart charger and a battery cover with hinged convenience tray. The top batteries swing out to enable easy inspection and maintenance of the two lower batteries. The charger operates from a 110 volt outlet and includes a detachable C power cord with onboard storage com- partment. Battery capacity is 158 H at a 6 hour (185 H at a 20 hour) rate. To charge the batteries, simply attach the power cord to the charger and plug it into the outlet. The battery connector can remain connected to the truck while the batteries are being charged. The charger automatically prevents the truck from being driven. Once the power cord is disconnected from the outlet, the truck is again operational. Battery connector Standard is red, 175 amp X type connector. dditional Features Standard equipment includes key switch, electronic horn, creep speed control, and operator convenience tray. Paint Gold and black. Options Cooler/Freezer Package Operating Temperatures: 0º to +120º F Sealed load wheel bearings Short E 45.2 forks, tapered fork tips, angled bumper for easy maneuverability in tight areas Various fork lengths 36, 42, and 48 Various fork over all widths 18, 22 and 27 Load backrest 48 or 60 bolt-on Combination hour meter, battery discharge indicator, lift interrupt indicator, and fault light display GNB PalletPro maintenance free battery pack with built in charger Lift Specifications 5.0 lift 4,000 lb. capacity Truck eight 850 lb (386 kg) (with battery pack) Power Voltage 24V Travel Speeds mile/h km/h Empty Loaded Load heel Positioning The load wheels will drop in the last opening of the pallet furthest from the operator when the pallet(s) length equals that of the forks. This opening must be at least nine inches in length and begin six inches from the end of the pallet. If the opening is less, the truck s lift height must be reduced depending on the opening width or the wheels will push-off the bottom boards. Contact your Yale Industrial Truck Dealer for details. Truck performance may be affected by the condition of the vehicle, how it is equipped, and the application. Consult your Yale Industrial Truck Dealer if any of the information shown is critical to your application. Specifications are subject to change without notice. This truck meets all design specifications of NSI B56.1 Safety Standard for Powered Industrial Trucks at the time of manufacture. Classified by Underwriters Laboratories, Inc. as to fire hazard only for Type E industrial trucks. Industrial Trucks Manufactured in our own ISO 9001 and ISO Registered Facilities Yale Materials Handling Corporation /05 15 P.O. Box 7367, Greenville, NC Copyright 2005, Yale Materials Handling Corporation Printed in U.S..

5 MP050-E Motorized Hand Low Lift Pallet Trucks ,000 lbs Yale motorized hand trucks combine the latest in state-of-the-art technology and ergonomics making Yale the leader for walkie applications. Controls The ergonomically designed handle minimizes wrist movement and provides a solid grip for additional control while operating the unit. Lift, Lower, and Horn pushbuttons are conveniently located at the operator s fingertips. The butterfly throttle control provides multiple grip positions minimizing operator fatigue while allowing travel direction and speed to be selected by rotating the actuator in the desired direction of travel. Maneuverability and the operating position are optimized for transporting loads by the bottom-mounted control handle. hen positioning loads in confined spaces, the standard Creep Speed Button allows the truck to be operated at limited speeds with the control handle in the full upright, vertical position. The Traction Reversing Switch located on top of the handle simultaneously reverses truck direction and sounds the horn should it come in contact with the operator. The wrap around design provides a large area of contact for the operator. User Selectable Performance Modes The truck has a choice of three pre-programmed performance modes that are selectable through the control handle. These modes alter the acceleration, deceleration and top speed of the truck, enabling the performance of the truck to be optimized for the particular work environment or the work cycle. Mode 1 Economy mode (battery saver) Soft acceleration; reduced top travel speed with auto deceleration Mode 2 Performance with auto deceleration Medium acceleration; reduced top travel speed with auto deceleration Mode 3 Performance without auto deceleration Maximum acceleration; maximum top travel speed without auto deceleration n additional custom performance mode is available and can be configured by your local Yale Dealer. Electrical System The MP electrical system is designed with uptime and reliability in mind. Industry leading technology, Serial Bus Communications, Hall Effect Sensors, Proximity Switches and Transistor Controllers are incorporated into the design, reducing the number of wires, connectors, switches and contactors. The 200 amp rated MOSFET Transistor motor controller in conjunction with the Separately Excited Motor (SEM) provides enhanced performance and battery efficiency in combination with higher top speeds when loaded and improved acceleration. The controller has onboard diagnostics and comes standard with an LED fault indicator. n optional display gauge is available. Programmable features include, top speed, acceleration rate and auto deceleration. The motor controller also provides an integral transistorized lift pump motor control, eliminating the lift pump contactor. Low battery lift interrupt without display is standard. Traction System The traction system consists of the traction motor, gearbox, and brake. The UL listed traction motor is enclosed to shield it from contamination and comes standard with premium brushes. The proven gearbox design includes greasable steer bearings and heat treated gears that are lubricated in an oil bath to provide long life. The maintenance free electromechanical brake is mounted on the inboard side of the traction motor and is shielded by the gearbox housing protecting it from debris and contamination. Hydraulic Components The lift pump and motor assembly features a 1.2 kw permanent magnet motor and translucent hydraulic tank. The permanent magnet motor provides high efficiency and low noise. The translucent tank provides quick and easy inspection of hydraulic oil level. Soft start of the hydraulic motor is provided through the Transistor controller. Forks and Frame Robotically welded steel reinforced forks are formed and fabricated for strength and rigidity and include 1.25 x 1.25 push rods. The rugged gearbox is surrounded by a protective steel bumper. (continued on back page) Truck shown with optional equipment

6 10 o 2.0 (50.8) LOD BCKREST 48.3 (1226) 31.5 (805) 10 o 60 o ITH LOD BCKREST FORKS RISED 10.6 (269) Y 5.0 LIFT (127) 8.3 (211) 3.5 (89) D X 3.25 (83) RUBBER DRIVE TIRE 9.0 x (166) B C Dimensions displayed in inches. Dimensions in parenthesis represent millimeters. Dimension Description Fork Position Dimensions - Inches (Millimeters) B C Fork Length heel Base without Load Backrest heel Base with Load Backrest MP050-E isle Layout Dimensions Standard Construction & Cooler/Freezer Package Nominal 36 (900) 42 (1050) 48 (1200) 60 (1500) ctual 35.4 (899) 41.3 (1049) 47.2 (1199) 59.0 (1499) Raised 41.0 (1040) 46.9 (1190) 52.8 (1340) 64.6 (1640) Lowered 44.1 (1120) 50.0 (1270) 55.9 (1420) 67.7 (1720) Raised 43.0 (1092) 48.9 (1242) 54.8 (1392) 66.6 (1692) Lowered 46.1 (1171) 52.0 (1321) 57.9 (1471) 69.7 (1770) Overall Length without Load Backrest 57.8 (1468) 63.7 (1618) 69.6 (1768) 81.4 (2068) Overall Length with Load Backrest 59.8 (1519) 65.7 (1669) 71.6 (1819) 71.7 (1821) D Chassis Length 22.4 (570) 22.4 (570) 22.4 (570) 22.4 (570) Outside Turning Radius (bumper) Raised 47.5 (1207) 53.4 (1356) 59.3 (1506) 71.2 (1808) OTR (b) without Load Backrest Lowered 50.6 (1285) 56.5 (1435) 62.4 (1585) 74.2 (1885) Outside Turning Radius (bumper) Raised 49.5 (1257) 55.4 (1407) 61.3 (1557) 73.2 (1859) with Load Backrest Lowered 52.6 (1336) 58.5 (1486) 64.4 (1636) 76.2 (1935) Outside Turning Radius (handle) Raised 48.9 (1243) 54.8 (1393) 60.7 (1623) 72.6 (1843) OTR (h) without Load Backrest Lowered 52.1 (1323) 58.0 (1473) 63.9 (1623) 75.7 (1923) Outside Turning Radius (handle) Raised 50.9 (1293) 56.8 (1443) 62.7 (1593) 74.6 (1895) with Load Backrest Lowered 54.1 (1374) 60.0 (1524) 65.9 (1674) 77.7 (1974) E Right ngle Stack w/o Load Backrest Raised 61.5 (1561) 66.3 (1685) 71.4 (1813) 81.8 (2077) Right ngle Stack with Load Backrest Raised 63.2 (1605) 68.0 (1727) 73.0 (1854) 83.5 (2121) F Equal Intersecting isle w/o Load Backrest Raised 52.5 (1334) 55.3 (1405) 58.4 (1484) 64.6 (1641) Equal Intersecting isle with Load Backrest Raised 53.2 (1351) 56.3 (1430) 59.4 (1509) 65.6 (1666) 67% 67% 67% 67% X % Grade Clearance 1 Raised 36% 31% 27% 23% Y 33% 33% 33% 33% 1 Measured to the bottom of a GM approved pallet on the forks while they are in the raised position

7 E RIGHT NGLE STCK 40.0 (1016) IDE LOD OTR (h) 1.0 (25) BETEEN LODS b 29.2 (742) a OTR (b) 7.2 (183) FORKS LOERED F EQUL INTERSECTING ISLE 40.0 (1016) IDE LOD Dimensions displayed in inches. Dimensions in parenthesis represent millimeters. Dimension Description Fork Position Dimensions - Inches (Millimeters) B C MP050-E isle Layout Dimensions SubZero Freezer Package & Heavy Corrosion/ash Down Package Fork Length heel Base without Load Backrest heel Base with Load Backrest Nominal 36 (900) 42 (1050) 48 (1200) 60 (1500) ctual 35.4 (899) 41.3 (1049) 47.2 (1199) 59.0 (1499) Raised 43.0 (1092) 48.9 (1242) 54.8 (1392) 66.6 (1692) Lowered 46.1 (1171) 52.0 (1321) 57.9 (1471) 69.7 (1770) Raised 45.0 (1143) 50.9 (1293) 56.8 (1443) 68.6 (1742) Lowered 48.1 (1222) 54.0 (1372) 59.9 (1521) 71.7 (1821) Overall Length without Load Backrest 59.8 (1519) 65.7 (1669) 71.6 (1819) 83.4 (2118) Overall Length with Load Backrest 61.8 (1570) 67.7 (1720) 73.6 (1869) 85.4 (2169) D Chassis Length 24.4 (620) 24.4 (620) 24.4 (620) 24.4 (620) Outside Turning Radius (bumper) Raised 49.5 (1257) 55.4 (1407) 61.3 (1557) 73.2 (1859) OTR (b) without Load Backrest Lowered 52.6 (1336) 58.5 (1486) 64.4 (1636) 76.2 (1935) Outside Turning Radius (bumper) Raised 51.5 (1308) 57.4 (1458) 63.3 (1608) 75.2 (1910) with Load Backrest Lowered 54.6 (1387) 60.5 (1537) 66.4 (1687) 78.2 (1986) Outside Turning Radius (handle) Raised 50.9 (1293) 56.8 (1443) 62.7 (1593) 74.6 (1895) OTR (h) without Load Backrest Lowered 54.1 (1374) 60.0 (1524) 65.9 (1674) 77.7 (1974) Outside Turning Radius (handle) Raised 52.9 (1344) 58.8 (1494) 64.7 (1643) 76.6 (1946) with Load Backrest Lowered 56.1 (1425) 62.0 (1575) 67.9 (1725) 79.7 (2024) E Right ngle Stack w/o Load Backrest Raised 63.2 (1605) 68.0 (1727) 73.0 (1854) 83.5 (2121) Right ngle Stack with Load Backrest Raised 64.9 (1648) 69.7 (1770) 74.6 (1895) 85.2 (2164) F Equal Intersecting isle w/o Load Backrest Raised 53.2 (1351) 56.3 (1430) 59.4 (1509) 65.6 (1666) Equal Intersecting isle with Load Backrest Raised 54.2 (1377) 57.3 (1455) 60.4 (1534) 66.6 (1692) 67% 67% 67% 67% X % Grade Clearance 1 Raised 35% 30% 26% 21% Y 33% 33% 33% 33% 1 Measured to the bottom of a GM approved pallet on the forks while they are in the raised position

8 (continued from front page) ll frame pivot points are equipped with heat treated, nickel plated linkage pins to resist corrosion. Serviceable pivot bushings and high pressure grease fittings are standard. Pallet Entry and Exit Yale fork design provides industry leading pallet entry and exit. The pallet entry/exit system consists of a tapered fork nose and pallet exit roller. heels, Tires, and Casters The standard load wheel configuration is a single load wheel with two roller bearings for long life. knock-out axle provides for quick and easy maintenance. 9 x 5 press-on rubber drive tire is standard. The drive wheel is secured to the drive axle with 5 bolts. dditional Features Battery connector standard is red, 175 amp connector. Standard equipment includes key switch, electronic horn, and creep speed control. Paint Gold and black. Options Cooler/Freezer Package Operating Temperatures: 0º to +120º F SubZero Freezer Package Operating Temperatures: -40º to +120º F Heavy Corrosion/ash Down Package Operating Temperatures: 0º to +120º F Sealed load wheel bearings Various fork lengths 36, 42, 48 and 60 Various fork over all widths 18, 22 and 27 Load backrest 48 or 60 bolt-on Combination hour meter, battery discharge indicator, lift interrupt indicator, and fault light display GNB PalletPro maintenance free battery pack with built in charger Industrial battery Lift Specifications 5.0 lift 5,000 lb. capacity Truck eight 553 lb (251 kg) (without industrial battery) Power Voltage 24V Travel Speeds mile/h km/h Empty Loaded Load heel Positioning The load wheels will drop in the last opening of the pallet furthest from the operator when the pallet(s) length equals that of the forks. This opening must be at least nine inches in length and begin six inches from the end of the pallet. If the opening is less, the truck s lift height must be reduced depending on the opening width or the wheels will push-off the bottom boards. Contact your Yale Industrial Truck Dealer for details. Truck performance may be affected by the condition of the vehicle, how it is equipped, and the application. Consult your Yale Industrial Truck Dealer if any of the information shown is critical to your application. Specifications are subject to change without notice. Fork Dimensions Dimension Description Dimensions - Inches (Millimeters) a Fork Spread Nominal 18 (460) 22.0 (560) 27 (670) Over ll idth ctual 18.1 (460) 22.0 (560) 26.4 (670) b Fork idth Nominal 7.0 (170) (Each) ctual 6.9 (170) This truck meets all design specifications of NSI B56.1 Safety Standard for Powered Industrial Trucks at the time of manufacture. Classified by Underwriters Laboratories, Inc. as to fire hazard only for Type E industrial trucks. Number of Cells Cell Size Battery and Compartment Specifications Plates per Cell Capacity (6 hr rate) Dimensions - Inches (Millimeters) Nominal t. (lb.) mp-hours KH X Y Z GNB PalletPro TM Battery Pack w/25 mp Charger Notes: 1) Battery well 28.0" (712 mm) x 9.1" (232 mm) x Open. Battery size is limited by rounded corners of battery compartment. Maximum width and length dimensions cannot be used in conjunction with each other. 2) Steel tray cover required for all batteries 3) Battery connector type is red, 175 amp connector 4) Cable lead position B 5) 20 cable length 6) Maximum cable gauge of 1/0 Industrial Trucks Manufactured in our own ISO 9001 and ISO Registered Facilities Yale Materials Handling Corporation /05 15 P.O. Box 7367, Greenville, NC Copyright 2005, Yale Materials Handling Corporation Printed in U.S..