aks-goliath Operating manual (translation of the original operating manual)

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "aks-goliath Operating manual (translation of the original operating manual)"

Transcription

1 Operating manual (translation of the original operating manual) Date: 03/2007 Dear Customer, thank you for purchasing our hoist. You have acquired a functional hoist with simple handling and the highest safety standard. Please always keep this manual in the vicinity of the hoist. made in troisdorf

2 TABLE OF CONTENTS 1 Introduction 3 2 Intended purpose, application area 3 3 General safety instructions 4 4 Receipt 5 5 Scope of delivery 5 6 Overview aks goliath 6 7 Commissioning 7 8 Operation Parking brake Manual control unit Spreading EMERGENCY STOP button Emergency lowering Wall charging station Rechargeable battery 13 9 Patient sling Accessories / combination Care / cleaning Storage Reuse Warranty Disposal Maintenance Service life Maintenance schedule Technical data Declaration of conformity 22 Page 2 GA_Lifter_goliath_070302_EN

3 1 Introduction Mobility, independence and increased quality of life as a result as well as a high degree of safety are certainly also your requirements. The aks goliath heavy-duty hoist meets these requirements. The mature technology and the convenient configuration ensure safe use. This means more quality of life for the patient and making the work easier for the care personnel. Among other things, the aks goliath is distinguished by the following features: stable construction with plug-in mast removable rechargeable battery pack with separate wall charging station high quality double castors with diameter of 100 mm (2 of these with parking brakes) electrically operated spreading of the chassis Read and observe this operating manual before first use. The present operating manual gives you the necessary information for safe use. In the case of a change of owner, pass on this operating manual. 2 Intended purpose / application area The heavy-duty hoist is intended for short-time use and can be universally used for the complete field of nursing care. The heavy-duty hoist described here is used exclusively for the conveyance / transfer of a single person up to maximum 150 kg in a sling. The heavy-duty hoist is not suitable for transporting over long distances or into other building levels. It is also not designed for misuse as a means of transport for objects. The climatic conditions should be an ambient temperature from +5 C to +40 C, relative humidity from 20% to 90% and air pressure from 700 hpa to 1060 hpa. Page 3

4 3 General safety instructions The operating manual for the aks heavy-duty hoist and the accessories used must be read carefully and completely before start-up to prevent damage due to incorrect operation or hazards. It contains important information and instructions which are necessary for the proper operation of the aks heavy-duty hoist. The aks heavy-duty hoist must only be used by persons who have read and understood the operating manual and have been informed about risks and safety precautions. The user must have been instructed about handling the aks heavy duty hoist. The user must ensure the proper, faultless condition of the aks heavy-duty hoist before every use. It must particularly be ensured that the aks heavy-duty hoist has been mounted in accordance with the operating manual and that it does not show any damage. All parts of the aks heavy-duty hoist and accessories must be attached safely and correctly. Boom and sling must be selected in accordance with the task in relation to model, size and design. Ensure that the sling system has been correctly and securely applied to the patient so that the patient is not injured during lifting. Never leave the patient unsupervised in the sling system. Not even for a short time. This particularly applies if there are persons in the vicinity who have not been instructed in handling the aks heavy-duty hoist (e.g. other patients, children etc.). In certain cases, electrical equipment can be affected by switched on cordless and mobile telephones and WLAN, Bluetooth or other equipment emitting radio waves. These can impair the function of the heavy-duty hoist. Particular caution is also required for strong electrical interference sources. The activation time and the safe working load must not be exceeded, otherwise safe operation can no longer be guaranteed. Ensure that no moisture penetrates into the electrical system. In the event of damage or malfunction, the aks heavy-duty hoist must not continue to be operated. Ensure that the chassis is spread before you turn a person in position at the boom over the bed or bath tub, sitting or lying in the sling. Page 4

5 4 Receipt The aks heavy-duty hoist has already been inspected at the factory for freedom from defects and completeness. Nevertheless, check the product immediately after receipt for possible transport damage. Check whether all parts are present using the delivery note and thus that the delivery is complete. If this is not the case, contact your aks authorised dealer. 5 Scope of delivery The aks heavy-duty hoist is delivered in two cartons: Carton I (Figure 01): mast / cantilever arm, rechargeable battery, wall charging station, mains power cable Carton II (Figure 02): chassis, boom, operating manual After removing all individual parts, check the completeness of the package contents. The standard scope of delivery consists of: 1 x heavy-duty hoist 1 x boom, depending on the order 1 x manual control unit 1 x removable rechargeable battery 1 x wall charging station Figure 01 Figure 02 Page 5

6 6 Overview aks goliath Cantilever arm Boom with padding Mast Drive (height adjustment) Rechargeable battery Chassis Double castors Manual control unit Control unit Drive (spreading) Figure 03 Page 6

7 7 Commissioning 1. Fetch the chassis from the carton and place it on level ground. 2. First lock the brakes of the rear castors and then remove the star handle bolt from the hole. For this, first remove the split pin (Figure 04). 3. Now you can insert the mast in the middle tube on the chassis (Figure 04). In doing so, ensure that the cantilever arm faces in the direction of travel. Lock the mast by inserting the star handle bolt in the hole and secure it afterwards with the split pin (Figure 05). Now tighten the clamping lever on the middle tube of the chassis. Figure 04 Figure Now remove the cable tie which holds the cantilever arm and mast together as transport lock. In order to fix the motor, remove the bolt from the retaining plate on the cantilever arm. Raise the cantilever arm and align the drill hole of the lift tube with that of the cantilever arm. Then insert the bolt again and lock using the locking plate (Figure 06). Figure 06 Page 7

8 5. Remove the retaining bolt with collar at the end of the cantilever arm for the mounting of the boom. Then insert the retaining bolt from below through the mounting hole of the boom. Then mount the retaining bolt with boom on the cantilever arm. Finally, pay attention to the correct application of the locking plate at the bolt (Figure 07). 6. Connect the spreader motor to the control unit. Check the plug connections on the control unit (Figure 08). It contains the following connection sockets: 1 = manual control unit 2 = lift motor 3 = spreader motor 4 = (not assigned) 7. The rechargeable battery must be charged for 18 hours before the first use of the hoist. Proceed according to section 8.6 / 8.7 Rechargeable battery. 8. Attach the charged battery to the control unit from above. Ensure that it engages and is seated firmly. 9. Unlock the EMERGENCY STOP button if it has been pressed by turning anticlockwise. 10. Finally, establish the safe condition of the hoist using the maintenance schedule. Figure 07 Figure 08 Page 8

9 8. Operation 8.1 Parking brake The parking brake is one of the important safety elements of a heavy-duty hoist. Your aks heavy-duty hoist is fitted with pressure brakes which act directly on the wheels. When the locking lever is pressed up to the stop, the brakes are locked and your aks heavy-duty hoist can no longer be moved (see Figure 10). Pull the lever up to release the brakes again (Figure 09). Attention! Always lock both castors. When only one castor is locked on a sloping floor, the unlocked wheel rolls downwards around the braked wheel. Depending on the slope of the floor, sideways tipping over can be expected. released locked Figure 09 Figure 10 Page 9

10 8.2 Manual control unit The drives are controlled using the manual control unit (Figure 11). Press the appropriate button to activate the required function. If a signal tone is heard when pressing any button, this indicates the battery capacity is too low. The rechargeable battery should be charged now. Height adjustment Spread adjustment Figure 11 Attention! If any operation of the control unit is performed despite the charge signal, the rechargeable battery can be destroyed by deep discharge. 8.3 Spreading You should increase the stability of the hoist before you lift any person with the hoist. This is achieved by spreading the chassis with an electric motor by operation of the manual control unit (figures 12 / 13). Figure 12 Figure 13 Page 10

11 8.4 EMERGENCY STOP button The control unit of the aks heavy-duty hoist is equipped with an EMERGENCY STOP button (Figure 14). The power circuit of the drives is interrupted immediately by pressing the red EMERGENCY STOP button on the control unit. This function enables you to avoid damage in emergencies. The button is unlocked again by turning it anticlockwise. EMERGENCY STOP button Electrical emergency lowering Figure Emergency lowering Mechanical emergency lowering: The aks goliath is equipped with mechanical emergency lowering for the case of any electrical defect on the motor or complete discharge of the rechargeable battery. This enables a retracting movement to be performed despite power supply failure. Requirement for this: the drive must be loaded in the compression direction. Pull the red release button in the direction of the piston rod eye for this. The lowering speed is dependent on the pulling intensity and on the static load on the drive. The drive can be prevented from retracting at any time by releasing the release button again. The emergency lowering operates with a load from 100 to 150 kg. The drive is operational when the emergency lowering has been ended. Electrical emergency lowering: Figure 15 Electrical emergency lowering is possible in the event of failure of the manual control unit. For this, use an object similar to a pin to press the Emergency button underneath the EMERGENCY STOP button (Figure 14). Page 11

12 8.6 Wall charging station Together with a second rechargeable battery, the wall charging station allows continuous use of the heavy-duty hoist. The wall charging station must be mounted upright on a wall (figures 16 / 17) before commissioning. The mounting rail is attached to a flat and firm wall for this. The type of fastening is dependent on the wall material. Use plugs and screws in accordance with the condition of the wall. The charger can now be pushed onto the lower part of the mounting rail and fastened using the supplied M5x10 mm screw. Now plug the device connector of the mains cable into the connection socket of the charger. Ensure that the device connector engages and cannot be pulled out. Attach the cable hook to the charger by pushing it onto the plug-in sockets from above. Hang the mains cable on the cable hook if you unplug the mains plug. The mains power cable must not lie on the floor. Mechanical loading of the mains power cable (e.g. driving over the mains power cable) must be avoided. Rechargeable battery Mounting rail Mains power cable with device connector (red) Cable hook Charger Figure 16 Figure 17 Page 12

13 8.7 Rechargeable battery The aks goliath is equipped with a removable rechargeable battery pack. Together with the wall charging station and a second rechargeable battery pack, flexibility, mainly in the stationary area, is guaranteed. Figure 18 General: Some basics should be observed for handling the rechargeable battery pack: It is recommended to charge the rechargeable battery for approx. 18 hours before first use to compensate for possible loss of capacity during storage. The rechargeable battery should be charged with an ambient temperature between 0 C and 40 C. The most effective charging temperature range is between 5 C and 35 C. The rechargeable battery must not be charged at temperatures below 0 C or above 40 C. The rechargeable battery system (control unit) is equipped with an audible signal transmitter. The audible charge signal is emitted when a button on the manual control unit is pressed. The rechargeable battery must be charged now. If any operation of the control unit is performed despite the charge signal, the rechargeable battery can be destroyed by deep discharge. The rechargeable batteries must be replaced after 4 years at the latest, depending on the usage intensity and possibly also even earlier. Frequent and rapid discharge reduces the service life of the rechargeable batteries. The rechargeable batteries should be connected to the mains power supply as often as possible to achieve optimum service life. The rechargeable batteries must be charged at the latest every three months otherwise they will be damaged due to self-discharging. If the rechargeable batteries are stored over a longer time, it is recommended to recharge them at the following time intervals: At a storage temperature of approx. 20 C, the rechargeable battery must be recharged every 5 months. Note: After long storage, all rechargeable batteries have smaller capacity than the rated capacity during the first cycle. In parallel operational readiness, the full capacity during charging is generally achieved within hours. Due to the reduction of the charging current during the charging process, the rechargeable battery is charged approx. 80% 4-5 hours after the charge signal sounds. A charging time of 10 hours is required to reach 100% charge. The rechargeable battery must be completely replaced if defective. Page 13

14 Charging process: Reach into the recessed grip at the top on the rechargeable battery pack to remove the rechargeable battery pack. Press the lever in the recessed grip and then lift the rechargeable battery pack out of the locking mechanism (Figure 19). Place the rechargeable battery pack on the wall charging station from above (Figure 17). In doing so, ensure that the rechargeable battery pack engages in the fixing rail. Connect the wall charging station to the mains power supply to start the charging process. The green LED ( ON ) signals the operational readiness and the yellow LED ( CHARGE ) indicates the charging process. Figure 19 9 Patient sling You need a patient sling to be able to lift a patient with the aks heavy-duty hoist. This should correspond to both the size, weight and condition of the patient as well as the intended action. The following describes attaching a standard patient sling to a lying patient: 1. Turn the patient so that he is facing away from you. 2. Roll up the patient sling in half in the longitudinal direction. 3. Place the patient sling with the rolled up side next to the patient. 4. Now turn the patient back on his back and pull the patient sling straight. 5. Now attach the patient sling loops in the sling eyelets on the boom. ATTENTION! Damaged or severely worn body support systems (patient slings) must not be used. Page 14

15 10 Accessories / combination Only original aks accessory parts should be used as accessories because these are tested by ourselves and thus guarantee faultless and safe functioning. Accessories: Boom Hoist sling Other accessories on request. Combination: You can also use other products from the company aks with the aks heavy-duty hoist. For example, these include our aks antidecubitus systems or our aks homecare beds range. ATTENTION! If accessories not shown are used or the hoist is used in combination with other products, the owner and the user are solely responsible to ensure reliable and safe operation. This combination must not be used if there is a possible recognised hazard. The responsible aks authorised dealer is pleased to help in the case of questions. Page 15

16 11 Care / cleaning The aks heavy-duty hoist is suitable for manual cleaning with a moist cloth. Cleaning and care materials suitable for plastic furniture can be used as cleaning materials. The following points must be noted here: Do not use any abrasive agents or cleaning materials containing ammonium chloride. Only use dermatologically tested materials. Do not use any basic and alkaline cleaning agents. Do not use any aggressive cleaning materials, e.g. solvents and hard brushes etc. Do not dip the electrical components in water. Only clean these with a slightly moist cloth. All hoist slings available from aks are machine-washable up to maximum 60 C. Do not iron! 12 Storage The storage location should preferably be cool, dry and dark. It should not exceed the normal room temperature. Direct sunlight must be avoided. The climatic conditions should be an ambient temperature from +15 C to +40 C, relative humidity from 25% to 85% and air pressure from 700 hpa to 1060 hpa. The aks heavy-duty hoist must be cleaned at the latest when it is used again and must be serviced as described under chapter 17 Maintenance. In the case of longer storage, note the point 8.7 Rechargeable battery. Page 16

17 13 Reuse The hoist must be cleaned at the latest when it is used again and must be serviced as described in chapter Disposal If the hoist has outlived its purpose, ask the local disposal company about the type of disposal. Each local authority has different regulations concerning this which can also change over the course of time. 15 Warranty The aks goliath is distinguished by its long service life and high reliability. Nevertheless, should technical problems arise, do not attempt to rectify the fault yourself. Contact your local authorised dealer. The dealer will provide assistance as quickly as possible and acquire all necessary spare parts if applicable. We guarantee our hoists for faultless condition in the context of our delivery and payment conditions. We make a factory warranty of 24 months from date of purchase. ATTENTION! Non-observance of the operating manual, improperly carried out maintenance work, and technical modifications and additions (attachments) without the permission of the aks company result in voidance of the warranty and general product liability. Page 17

18 16 Service life The service life for hoists in the domestic area is of course dependent on the type of use. Frequent adjustment, transport, installation and washing reduce the service life as do improper handling, irregular maintenance and exceeding the load cycles of the drives or the safe working load. 17 Maintenance General maintenance instructions The service life of the aks heavy-duty hoist is basically affected by the handling. Frequent adjustment and transport reduce the service life as do improper handling, incorrect maintenance and exceeding the load cycle of the drives or the payload. In order to ensure safe operation, a visual inspection and functional check with electrical inspection afterwards should be carried out at least annually. If the aks heavy-duty hoist is not maintained properly, safe use is no longer guaranteed. Wear, damage or also loosening of connecting elements can thus not be detected. In the case of damage and defects, inform your aks authorised dealer who will replace these parts. In the case of damage to load-bearing parts or the electrical system, the aks heavy-duty hoist must no longer be used. The electrical system consists of individual components such as adjustment drives, control unit, rechargeable battery and manual control unit. These closed units are maintenance-free and must not be opened. The modular design of the hoists allows replacement of individual components in the event of defects. Only original aks spare parts must be used, otherwise any warranty is void. You must not make any technical modifications and additions (attachments) without permission from aks. Only use the supplied individual parts for the aks heavy-duty hoist. Improper handling such as knocking, hitting, bumping release us from any warranty claim. Page 18

19 The Medical Products Operator Regulations are binding for the operator / user of medical products. The operator / user of electrically operated patient hoists is obliged according to the applicable accident prevention regulations BGV A3 to inspect these using a qualified electrician. According to VDE , this inspection must contain the following points: Visual inspection Insulation resistance measurement Leakage current measurement Functional check Overall assessment Service: If you have questions or need assistance, please contact your authorised dealer who is instructed in accordance with our guidelines and can provide advice, service and repairs. We have a network of dealers across Europe. This ensures that your requirements can be satisfied optimally. Page 19

20 18 Maintenance schedule The maintenance must be performed at least annually and before each reuse. Note: If the error rate in your company for the electrical measurements (DIN VDE :2001) is <2%, BGV A3 allows you as operator to increase the maintenance intervals to 2 years. The mains power connection cable must be at least visually inspected regularly at short intervals (e.g. monthly and after every occurring mechanical load) with respect to mechanical damage. Check of the basic requirements Appropriate and safe use Permitted accessories or equipment combination Boom used (enter here): Patient sling used (enter here): Rating plate present Presence of operating manual Inspection of the mechanical parts No unauthorised interventions, modifications or improper handling No soiling (in particular the lift tubes) No surface damage or corrosion Castors (undamaged and fastened) Spreading mechanism (undamaged and fastened) Mast (fastening of the clamping lever, locking bolt with split pin, weld seams) Cantilever arm (fastening to mast, weld seams) Chassis (weld seams) Boom (padding, fastening with bolt and locking plate, retaining bolt for signs of wear, e.g. embedding, replace) Patient sling (no damage such as cracks or holes, seams) Drive (fastening to mast and cantilever arm with bolt and locking plate) Control unit (fastening to mast) Inspection of the electrical parts Wall charging station (connector, cable, case, rating plate / lettering, indicators) Case (drive, control unit, manual control unit) Cables (manual control unit cable, connection cables, plug connections with sealing ring) Battery charger connection (green LED indicates the correct connection of the battery charger) Charging indicator (yellow LED shows the charging process) Note service life of the rechargeable batteries (batteries must be replaced every 4 years at the latest) Electrical inspection according to DIN VDE :2001 Insulation resistance measurement (greater than 7 MΩ) Replacement units leakage current measurement (max. 0.2 ma) Functional check A lifting cycle without load (traverse complete adjustment range, easy running, speed, limit switch in both directions, power consumption, no unusual noises) A lifting cycle with maximum load of 250 kg (observe self-locking) Castors (handling, easy running, no unusual noises) Brakes (reliability, locking) Manual control unit (first failure safety: no function of the manual control unit with rotary switch position I or II) EMERGENCY STOP button functions Mechanical emergency lowering functions Overall assessment Hoist OK Date Company Inspector Signature YES NO Page 20

21 19 Technical data Overall height: Attachment height: Chassis width: Chassis length: Ground clearance: Total weight: Individual weight: Individual weight: Load bearing capacity: Castors: Climatic conditions: Input voltage: Duty cycle: Protection type: 132 cm 58 cm to 198 cm 70.5 cm to 116 cm Technical Data 128 cm (including castors) 14 cm 53 kg 24 kg (mast with cantilever arm and rechargeable battery) 28.5 kg (chassis) 250 kg ø 100 mm (2 with and 2 without individual wheel brake) - ambient temperature from +5 C to 40 C - relative humidity from 20% to 90% Electrical data (control unit) 24 V DC (rechargeable battery capacity: 2.9 Ah) 2/18-2 minutes continuous operation followed by 18 minutes pause IP X5 Protection class: Application part: Protection type: Mains voltage: Charging current: Electrical data (wall charging station) II (not suitable for applications in potentially explosive atmosphere) Type B IP X4 100 V to 240 V (50 / 60 Hz) up to 650 ma Explanation of the symbols Protection class II Type B Observe accompanying papers Only suitable for dry indoor areas This product complies with the essential safety requirements which are mentioned in the basic requirements of the EU Council Directive 93/42/EEC about medical products. All parts and data are subject to constant further development and can thus be different from the information shown in this document. Page 21

22 20 Declaration of conformity Page 22

23 Enter the serial number of your patient hoist here: Serial number: Enter the year of manufacture of your patient hoist here: Year of manufacture: Enter the telephone number and name of the contact person of your aks authorised dealer here: Name: Telephone number: Notes: Page 23

24 Published by: aks aktuelle krankenpflege systeme GmbH Antwerpener Straße Troisdorf Tel: / Fax: / website: Reprints whether in whole or in part are only allowed with the previous permission of the publisher. All rights reserved. We reserve the right to make changes.

aks-efw 300 Fastening set with weighing hanger for hoist scales with EC calibration Operating manual (translation of the original operating manual)

aks-efw 300 Fastening set with weighing hanger for hoist scales with EC calibration Operating manual (translation of the original operating manual) Fastening set with weighing hanger for hoist scales with EC calibration Operating manual (translation of the original operating manual) Date: 2012_01 Page 2 TABLE OF CONTENTS 1 Introduction 4 2 Intended

More information

aks-clino II Patient hoist Operating manual

aks-clino II Patient hoist Operating manual Patient hoist Operating manual Date: 2011_12 Page 2 TABLE OF CONTENTS 1 Introduction 4 2 Intended purpose 5 3 General safety instructions 6 4 Scope of delivery 7 5 Product description 8 6 Assembly 10 7

More information

aks-dualo Patient hoist Operating manual

aks-dualo Patient hoist Operating manual Patient hoist Operating manual Date: 2012_12 TABLE OF CONTENTS 1 Introduction 3 2 Intended purpose 4 3 General safety instructions 5 4 Scope of delivery 6 5 Product description 7 6 Assembly 11 7 Commissioning

More information

Assembly and Operating Instructions

Assembly and Operating Instructions A35AE FU...A150AE FU en Assembly and Operating Instructions Plug-in drives Important information for: Fitters / Electricians / Users Please forward accordingly! These instructions must be kept safe for

More information

Installation and operating instructions. Solar charge controller MPPT 10 A / 20 A Z Z

Installation and operating instructions. Solar charge controller MPPT 10 A / 20 A Z Z Installation and operating instructions Solar charge controller MPPT 10 A / 20 A EN 1 Contents 1. About these instructions... 3 1.1 Applicability... 3 1.2 Users... 3 1.3 Description of symbols... 3 2.

More information

c-go 24V/6A 24V/8A 24V/12A

c-go 24V/6A 24V/8A 24V/12A c-go 24V/6A 24V/8A 24V/12A Battery charger GB Instruction manual 1 Index 1. Product description... 2 2. Safety advices... 3 3. Quick start guide... 4 4. Operation... 4 5. Problem solving... 6 6. Specifications...

More information

Adjustable Speaker Mount GRAVIS 12

Adjustable Speaker Mount GRAVIS 12 Adjustable Speaker Mount GRAVIS 12 User's Manual Translation of the original instructions Version 3.3 Released: 19.01.2017 Important Information, Please Read Before Use! KLING & FREITAG GmbH Junkersstraße

More information

Adjustable Speaker Mount GRAVIS 8

Adjustable Speaker Mount GRAVIS 8 Adjustable Speaker Mount GRAVIS 8 User's Manual Translation of the original instructions Important Information, Please Read Before Use! KLING & FREITAG GmbH Junkersstraße 14 D-30179 Hannover TEL +49 (0)

More information

Drive Unit e-drive1. Installation instructions 04/2014. English translation of the original German installation instructions

Drive Unit e-drive1. Installation instructions 04/2014. English translation of the original German installation instructions Drive Unit e-drive1 Installation instructions 04/2014 English translation of the original German installation instructions Contents Foreword... 3 Availability... 3 Structural features in the text... 3

More information

Operating instructions

Operating instructions Operating instructions Type TEKA filtoo TEKA Absaug- und Entsorgungstechnologie GmbH Industriestraße 13 D-46342 Velen Postfach 1137 D-46334 Velen Tel.: +49 (0) 2863 9282-0 Fax: +49 (0) 2863 9282-72 E-Mail:

More information

Installation and operating instructions. Solar charge controller 10 A / 15 A / 0 A / 30 A PHOTOVOLTAIK - PHOTOVOLTAICS - PHOTOVOLTAIQUE - FOTOVOLTAICA

Installation and operating instructions. Solar charge controller 10 A / 15 A / 0 A / 30 A PHOTOVOLTAIK - PHOTOVOLTAICS - PHOTOVOLTAIQUE - FOTOVOLTAICA PHOTOVOLTAIK - PHOTOVOLTAICS - PHOTOVOLTAIQUE - FOTOVOLTAICA Installation and operating instructions Solar charge controller 10 A / 15 A / 0 A / 30 A EN 74.86 08.4 1. About this manual These operating

More information

PURE SINE WAVE DC TO AC POWER INVERTER

PURE SINE WAVE DC TO AC POWER INVERTER PURE SINE WAVE DC TO AC POWER INVERTER 60S-12A / 60S-24A 60S-12E / 60S-24E 100S-12A / 100S-24A 100S-12E / 100S-24E 150S-12A / 150S-24A 150S-12E / 150S-24E Instruction manual SINE WAVE INVERTER Please read

More information

ACROBAT SWING STAND MODEL

ACROBAT SWING STAND MODEL Mounting instructions Directions for use ACROBAT SWING STAND MODEL Dr. Mach GmbH u. Co.KG, Flossmannstrasse 28, D-85560 Ebersberg Tel.: +49 (0)8092 2093 0, Fax +49 (0)8092 2093 50 Internet: www.dr-mach.com,

More information

Installation manual portable distributors

Installation manual portable distributors EN Installation manual portable distributors EN 60003206 Issue 11.2016 15/11/2016 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3 Signal words used 4 2 Intended

More information

Battary powered cutting tool. AS6-S32 Art convincing solutions. Video

Battary powered cutting tool. AS6-S32 Art convincing solutions. Video Hydraulic cutting tool Smart Line Operating instructions Battary powered cutting tool AS6-S32 Art. 216419 Video 216419 convincing solutions 1. Technical data Area of application: Separating copper and

More information

The Future of Homecare Lifting is Here!

The Future of Homecare Lifting is Here! HYDRAULIC OR BATTERY OPERATED MODEL:400H / 400EL / 400LK The Future of Homecare Lifting is Here! Thank you for choosing the BestLift 400 To better serve you, please record the following information: Dealer

More information

L Charger. Instruction manual

L Charger. Instruction manual L 1039-10 Charger Instruction manual Contents Contents Contents... 1 Important safety instructions... 2 Package contents... 3 The L 1039-10 charger... 3 Product overview... 4 Putting the charger into operation...

More information

Pallas/150. Stand-aid lifter. User instruction. Important - information. This user instruction must be read before the Pallas 150 is used.

Pallas/150. Stand-aid lifter. User instruction. Important - information. This user instruction must be read before the Pallas 150 is used. Pallas/150 Stand-aid lifter User instruction Important - information This user instruction must be read before the Pallas 150 is used. This user instruction is intended for technicians, installers, therapists

More information

Installation manual wall-mounted distributor

Installation manual wall-mounted distributor EN Installation manual wall-mounted distributor EN 60003233 Issue 11.2016 2016-14-11 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3 Signal words used 4 2

More information

MANUAL. Single charger

MANUAL. Single charger MANUAL Single charger HST-PR-2830 & HST-PR-2830USA for HS-Technik batteries HST-PR-18xx HST-PR-14xx issue date: November 2016 Table of contents Page 1. Basic information...3 1.1. Purpose of this document...3

More information

Belt Conveyor Pull Rope Switch Types HEN, HEK and SEM OPERATING INSTRUCTIONS

Belt Conveyor Pull Rope Switch Types HEN, HEK and SEM OPERATING INSTRUCTIONS Belt Conveyor Pull Rope Switch Types HEN, HEK and SEM OPERATING INSTRUCTIONS 2 CE-Sign and Conformity The device meets the requirements of the valid European and national regulations. Conformity has been

More information

Operating manual. original operating manual. HDA eco Box 12/24V DC Automatic Dispenser. Translation of the. Item No.:

Operating manual. original operating manual. HDA eco Box 12/24V DC Automatic Dispenser. Translation of the. Item No.: Operating manual HDA eco Box 12/24V DC Automatic Dispenser Item No.: 110 500 900 Translation of the original operating manual Important! Copyright The operating manual is always to be read before commissioning

More information

CORDLESS WORK LIGHT CORDLESS WORK LIGHT. Operation and Safety Notes IAN

CORDLESS WORK LIGHT CORDLESS WORK LIGHT. Operation and Safety Notes IAN CORDLESS WORK LIGHT CORDLESS WORK LIGHT Operation and Safety Notes IAN 288518 GB / IE / NI Operation and Safety Notes Page 5 A HG01386A-BS 5 1 2 6 3 4 7 8 10 9 B C 11 12 13 List of pictograms used...page

More information

IU0U automatic charger Read these instructions carefully before the installation and commissioning and keep them in a safe place. Pass it on to the buyer in case of the further sale of the system. Contents

More information

SGA-440 by Prism Medical

SGA-440 by Prism Medical SGA-440 by Prism Medical Introduction... 2 Overview... 2 Components of the Sit to Stand Lift... 3 Component List... 4 Specifications... 5 Cautions... 6 Assembly Instruction... 7 Operation Charging......12

More information

Katalysator Nr /

Katalysator Nr / Katalysator Nr. 2300-0001 / 2300-3001 Bedienungsanleitung Instruction manual Mode d emploi Istruzioni d uso Instrucciones de servicio Инструкция по эксплуатации 取扱説明書 사용설명서 21-6499 15092017 Made in Germany

More information

Operating instructions

Operating instructions Operating instructions Digital tank contents indicator DTA 10 DTA 10 DTA 10 0 4.0 m fuel oil 0 3.5 m water Read instructions before using device! Observe all safety information! Keep instructions for future

More information

Contamination switch VS

Contamination switch VS Contamination switch VS RE 95148 Issue: 12.2015 Replaces: 09.2015 For detecting metallic impurities in oil Inhalt Ordering code 2 Description 2 Technical data 2 Connection 3 Dimensions 3 Safety instructions

More information

Operating Instructions

Operating Instructions Operating Instructions Ex UPS Combination of > 8265/5 GUBox control panel > 8316 battery box Contents 1 Contents 1 Contents 2 2 General Information 2 3 Safety Instructions 2 4 Conformity to standards 3

More information

CORDLESS WORK LIGHT CORDLESS WORK LIGHT. Operation and Safety Notes IAN

CORDLESS WORK LIGHT CORDLESS WORK LIGHT. Operation and Safety Notes IAN CORDLESS WORK LIGHT CORDLESS WORK LIGHT Operation and Safety Notes IAN 279345 GB / IE / NI Operation and Safety Notes Page 5 A HG01386A-BS HG01386B-BS 1 5 2 6 3 4 7 8 10 9 B C 11 12 13 Introduction...Page

More information

OPERATIONS MANUAL LEVER CHAIN HOIST

OPERATIONS MANUAL LEVER CHAIN HOIST OPERATIONS MANUAL LEVER CHAIN HOIST IMPORTANT SAFETY INFORMATION Please read, understand and follow all safety information contained in these instructions prior to the use of this hoist. Retain these instructions

More information

Lumitester PD-20 Control Kit

Lumitester PD-20 Control Kit 日本語による取扱説明は 17 ページからとなります Lumitester PD-20 Control Kit Operation manual Thank you for purchasing the Lumitester PD-20 Control Kit. To use this kit safely and correctly, read this operation manual carefully

More information

Assembly and Maintenance Manual Type RSBW

Assembly and Maintenance Manual Type RSBW Assembly and Maintenance Manual Type RSBW Hatschekstr. 36 69126 Heidelberg Germany Tel +49(0)6221 30470 Tel +49(0)6221 304731 info@stieber.de www.stieber.de Stieber Clutch Date of issue: 16/03/2017 GB

More information

HYDRAULIC PALLET TRUCKS

HYDRAULIC PALLET TRUCKS HYDRAULIC PALLET TRUCKS HYDRAULIC PALLET TRUCKS MODEL Nos: PT550 GAL & PT685 GAL PART Nos: 7630234 & 7630236 OPERATION & MAINTENANCE INSTRUCTIONS 0204 Please read these instructions carefully before operating

More information

Electro-hydraulic crimping tools SD300-6M / SD400-6M. Art /M / /M. convincing solutions. Video /M Video /M

Electro-hydraulic crimping tools SD300-6M / SD400-6M. Art /M / /M. convincing solutions. Video /M Video /M Electro-hydraulic SMART crimping tools INSTRUCTION MANUAL Electro-hydraulic crimping tools SD300-6M / SD400-6M Art. 216663/M / 216667/M Video 216663/M Video 216667/M convincing solutions 1. Technical data

More information

Operating Instructions. bluesmart Active

Operating Instructions. bluesmart Active Table of contents 1. Overview 3 2. Safety 3 2.1 Symbols in these instructions 3 2.2 Intended use 4 2.3 Responsibility of the operator 4 3. Setup and function 4 3.1 Brief description 4 3.2 Overview 5 3.3

More information

WHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com.

WHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com. WHAT S IN THE BOX METAL CUTTING SHEARS 500W INSTRUCTION MANUAL SPECIFICATIONS Motor: No load speed: Max. Thickness: Tool weight: 500W 0 1,600 rpm 1.2mm 2.2kg Metal Cutting Shears Hex Key ozito.com.au MCS-5000

More information

Operating manual CLEANlift telescopic lifting column

Operating manual CLEANlift telescopic lifting column Operating manual CLEANlift telescopic lifting column Original operating manual Version 1.0. This applies to all lifting columns made since 01.02.2012. Copyright 2011 ASSTEC Assembly Technology GmbH & Co

More information

Translation of the Original operating instructions Lifting device Z 70 /...

Translation of the Original operating instructions Lifting device Z 70 /... Translation of the Original operating instructions Lifting device Z 70 /... Content 1. Lifting device / Correct use according to regulations 2. Basic principles 3. General information 4. Special remarks

More information

Instructions for Use Plain Trolley ULK Geared Trolley UHK

Instructions for Use Plain Trolley ULK Geared Trolley UHK Instructions for Use Plain Trolley Geared Trolley Item no. Load-carrying capacity (payload) Weight Trolley widths *special trolley widths* Device dimensions mm H / W / D Minimum curve radius mm -005 0,5

More information

ACROBAT SWING STAND MODEL

ACROBAT SWING STAND MODEL Mounting instructions Directions for use ACROBAT SWING STAND MODEL Stand lamps: Mach 120... Mach 120F... Mach 130... Mach 130F... Mach LED 120... Mach LED 120F... Mach LED 130... Mach LED 130F... Order

More information

18V CORDLESS DRILL MODEL NO: CON18LiC

18V CORDLESS DRILL MODEL NO: CON18LiC 18V CORDLESS DRILL MODEL NO: CON18LiC PART NO: 6479531 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 - ISS 2 INTRODUCTION Thank you for purchasing this CLARKE Cordless Drill. Before

More information

Heavy Duty Engine Cranes

Heavy Duty Engine Cranes Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number Atd-7484 Atd-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model Atd-7484 Model Atd-7485 Atd Tools Inc. 160 Enterprise Drive, Wentzville,

More information

SI AT A22. English. Printed: Doc-Nr: PUB / / 000 / 03

SI AT A22. English. Printed: Doc-Nr: PUB / / 000 / 03 SI AT A22 English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and

More information

Angle sensor AN2 series 30

Angle sensor AN2 series 30 Angle sensor AN2 series 30 RE 95143 Edition: 09.2016 Replaces: 06.2015 Hall-effect sensor for angular measurement Features Angle sensor element based on the Hall-effect principle Shaft can be turned through

More information

Technical Documentation

Technical Documentation Technical Documentation Product manual Holding brake controller Document: 0198441113316 Edition: V1.00, 03.2006 Important information The drive systems described here are products for general use that

More information

Heavy Duty Four Wheeled Walker

Heavy Duty Four Wheeled Walker Heavy Duty Four Wheeled Walker Weight Capacity: 500 lbs. ITEM # W1802 Made in China 2011 ESSENTIAL MEDICAL SUPPLY, INC. Manufactured for Orlando, FL 32822 -- SAVE THESE INSTRUCTIONS -- Do not attempt to

More information

Installation and Service Instructions (Translation of the Original Instructions) SV120. C _EN 11/2009 Rev.0

Installation and Service Instructions (Translation of the Original Instructions) SV120. C _EN 11/2009 Rev.0 Installation and Service Instructions (Translation of the Original Instructions) SV20 Introduction Carefully read these Installation and Service Instructions prior to the installation and start of operation

More information

Owners Manual Unilift

Owners Manual Unilift Owners Manual Unilift Contents Chapter Page Introduction 2 Safety Advise 3 Warranty 4 Using the Unilift 5 Fitting the Sling 6 Lifting and lowering 7 Emergency Controls 8 Battery and Charging Systems 9

More information

Exchange of rollers from the XTS-Mover

Exchange of rollers from the XTS-Mover Service documentation for AT901-0050-0550 and AT9011-00x0-0550 Version: Date: 1.0 0.10.017 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1. Documentation issue

More information

C3 Operating Instructions

C3 Operating Instructions Version 3.1 Stand 09.2014 Robert Bosch (Australia) Pty. Ltd. 1555 Centre Road Clayton, Victoria 3168 C3 Operating Instructions For further information please contact Bosch at: Australia 1300 30 70 40 www.boschautoparts.com.au

More information

Blec Bar grader Serial number: User manual and parts handbook

Blec Bar grader Serial number: User manual and parts handbook User manual and parts handbook Blec Bar grader 180-240 Serial number: ATTENTION: TO ENSURE SAFE USE OF THIS MACHINE AND TO BE ABLE TO ACHIEVE THE BEST RESULTS, IT IS OF THE UTMOST IMPORTANCE TO READ THIS

More information

Chain wheel rolling door drives DKM 170, 250, 350, 500 and 750 WKM 170

Chain wheel rolling door drives DKM 170, 250, 350, 500 and 750 WKM 170 EN Chain wheel rolling door drives DKM 170, 250, 350, 500 and 750 WKM 170 Assembly instructions (translation) DIN EN ISO 9001: 2008 Certificate 01 100 07001/03 For the safety of persons it is important

More information

Level Measuring Sensor for Diesel Fuel Tanks

Level Measuring Sensor for Diesel Fuel Tanks Installation and Operating Manual Level Measuring Sensor for Diesel Fuel Tanks Executions with switchable output voltage signal: 0-2.3 V and industrial standard signal 0-10 V: Tank Sensor Diesel 010-250

More information

Installation and Connection: Installation and Operating Manual

Installation and Connection: Installation and Operating Manual Installation and Operating Manual LCD Battery Computer 100 S with Measuring Shunt 100 A No. 1262 LCD Battery Computer 200 S with Measuring Shunt 200 A No. 1265 LCD Battery Computer 400 S with Measuring

More information

Aqua Bath Lift Assembly Instructions Rev: January 2017

Aqua Bath Lift Assembly Instructions Rev: January 2017 Aqua Bath Lift MODEL #BLA-8100 Thank you for Choosing Columbia! Your Aqua Bath Lift has been built to the highest standards of quality to ensure years of superior service. Please take the time to read

More information

Instruction Manual PC104/PC105 3-PHASE SOCKET TESTER. Check out what else you can get from Martindale:

Instruction Manual PC104/PC105 3-PHASE SOCKET TESTER. Check out what else you can get from Martindale: Check out what else you can get from Martindale: 17th Edition Testers Accessories Calibration Equipment Continuity Testers Electricians Kits Environmental Products Full Calibration & Repair Service Fuse

More information

seca 954 D GB F I E Instruction manual and guarantee

seca 954 D GB F I E Instruction manual and guarantee seca 954 D GB F I E Instruction manual and guarantee 1. Congratulations! By purchasing the seca 954 electronic chair scale, you have acquired a highly-accurate and sturdy piece of equipment. seca has been

More information

CORDLESS RADIO INSTRUCTION MANUAL

CORDLESS RADIO INSTRUCTION MANUAL WHAT S IN THE BOX CORDLESS RADIO INSTRUCTION MANUAL SPECIFICATIONS Input: AM Frequency: FM Frequency: Auxiliary Jack: Speaker Output: Weight: 18V 522-1620KHz 87.5-108MHz 3.5mm 3W 0.6kg Cordless Radio 400mm

More information

Working Instructions Translation

Working Instructions Translation WIDOS Einsteinstr. 5 Phone +49 (0) 71 52 99 39-0 W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax +49 (0) 71 52 99 39-40 Website: www.widos.de Email: info@widos.de Working Instructions Translation

More information

before serial number 2214

before serial number 2214 before serial number 2214 Contents Page Safety Rules... 3 Pre-operational & Safety Inspection... 4 Operating Instructions... 6 Transport... 12 Maintenance & Routine Service... 12 Specifications... 14 SAFETY

More information

D Dräger Alcotest 3000 Breath Alcohol Measuring Device

D Dräger Alcotest 3000 Breath Alcohol Measuring Device D Dräger Alcotest 3000 Breath Alcohol Measuring Device Instructions for Use ST-14138-2008_sw.eps Table of Contents For Your Safety....................................... 3 Intended Use..........................................

More information

Installation and operating instructions. Solar charge controller Solarix MPPT 1010 and Z Z

Installation and operating instructions. Solar charge controller Solarix MPPT 1010 and Z Z Installation and operating instructions Solar charge controller Solarix MPPT 1010 and 2010 EN 730927 Z04 1440 730927 Z04 1440 1 Contents 1. About these instructions...3 1.1 Applicability...3 1.2 Users...3

More information

OWNER S MANUAL Soco TS1200R Soco TS800R

OWNER S MANUAL Soco TS1200R Soco TS800R OWNER S MANUAL Soco TS1200R Soco TS800R Congratulations on purchasing your Soco electric motorcycle. We wish you an enjoyable and safe riding experience. For your safety and comfort, we recommend that

More information

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC

Automatic Battery Charger Switching mode with Micro-controlled Input: Vac / Output: 12Volt DC Automatic Battery Charger Switching mode with Micro-controlled Input:220-260Vac / Output: 12Volt DC User s Manual and Important Safety Information Model: OC-SW121080 / OC-SW121160 / OC-SW121210 FEATURES

More information

EN Operating manual. Motorised zone valve. Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3

EN Operating manual. Motorised zone valve. Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3 EN Operating manual Motorised zone valve Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3 This manual ensures safe and efficient use of the 3PV2 or 3PV8 force-actuated three-way valve with spring-loaded return

More information

Marlin Bath Lift BLM-8200 WARNING! Read ALL instructions before using this product!

Marlin Bath Lift BLM-8200 WARNING!  Read ALL instructions before using this product! Marlin Bath Lift BLM-8200 www.inspiredbydrive.com WARNING! Read ALL instructions before using this product! PRODUCT DESCRIPTIONS Your Marlin Bath Lift has been built to the highest standards of quality

More information

Blue Air. Commercial Refrigeration Inc. Installation & Operation Manual Chef Bases

Blue Air. Commercial Refrigeration Inc. Installation & Operation Manual Chef Bases Blue Air Commercial Refrigeration Inc. Installation & Operation Manual Chef Bases Please read this manual completely before installing or operating this unit! BACB53 BACB71 BACB74 BACB83 BACB86 BACB96

More information

Porte 300 Users Manual Swing Gate Opener 24V DC for residential use only

Porte 300 Users Manual Swing Gate Opener 24V DC for residential use only Porte 300 Users Manual Swing Gate Opener 24V DC for residential use only Signal Light Push-button Control Box Gate 2 Gate 1 Contents 1. Important Safety Information 2. Product Description and Application

More information

QA4 Surgery Trolley System Manual Function Operating Instructions

QA4 Surgery Trolley System Manual Function Operating Instructions QA4 Surgery Trolley System Manual Function Operating Instructions Catalogue No. 21310 Anetic Aid Ltd. Queensway Guiseley West Yorkshire, LS20 9JE United Kingdom T +44 (0) 1943 878647 F +44 (0) 1943 870455

More information

EX Series User Manual

EX Series User Manual MODELS: EX90L T4 IIB 720 DS, EX90L T4 IIB 1440 SS, EX90L T4 IIC 720 SS EXIN LIGHT EX & INDUSTRIAL LIGHTING EX Series EX90L T4 IIB 720 DS, EX90L T4 IIB 1440 SS, EX90L T4 IIC 720 SS Contents 0. Introduction

More information

INSTRUCTION MANUAL. Battery powered crimping tool SMART-LINE. Battery powered crimping tool SO-6M. Art /M. convincing solutions.

INSTRUCTION MANUAL. Battery powered crimping tool SMART-LINE. Battery powered crimping tool SO-6M. Art /M. convincing solutions. Battery powered crimping tool SMART-LINE INSTRUCTION MANUAL Battery powered crimping tool SO-6M Art. 216801/M Video 216801/M convincing solutions 1. Technical data Area of application: For the creation

More information

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ,

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , ELECTRIC HOIST MODEL NO: CH2500B, CH4000B PART NO: 7630386, 7630391 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0517 - Iss 5 INTRODUCTION Thank you for selecting this Clarke Electric Hoist.

More information

Support legs. Installation and operating instructions

Support legs. Installation and operating instructions Support legs Installation and operating instructions Table of contents 1 Explanation of symbols... 3 2 Assembly... 4 3 Operation... 5 4 Servicing and testing... 8 2 MUB 013 001 M01 (REV--) 11/2016 Support

More information

Operating Instructions for Porsche Junior Seat ISOFIX

Operating Instructions for Porsche Junior Seat ISOFIX Operating Instructions for Porsche Junior Seat ISOFIX 33 Porsche, the Porsche Crest and Tequipment are registered trademarks of Dr. Ing. h.c. F. Porsche AG. Reprinting, even of excerpts, or duplication

More information

User Manual. User Manual IQ338XL

User Manual. User Manual IQ338XL User Manual IQ338XL Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. Please follow the safety and care instructions in

More information

BA EN.=A. Ä.=A.ä. Operating Instructions. Gearbox. Type 12. / 52.

BA EN.=A. Ä.=A.ä. Operating Instructions. Gearbox. Type 12. / 52. BA 12.0028 EN.=A. Ä.=A.ä Operating Instructions Gearbox Type 12. / 52. Product key Gearboxes 1 2... Product group Product family Gearbox size Design Geared motors 1 2... Product group Product family Gearbox

More information

SWING ARM MAGNIFYING LAMP MODEL NO: SAM170

SWING ARM MAGNIFYING LAMP MODEL NO: SAM170 SWING ARM MAGNIFYING LAMP MODEL NO: SAM170 PART NO: 54605338 ASSEMBLY & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0217 INTRODUCTION Thank you for purchasing your CLARKE swing arm magnifying lamp,

More information

essentia audiotoo s User Manual Rev 2.0 September 2015 Mains Multiplier 5 Mains Multiplier 7 Mains Multiplier 8

essentia audiotoo s User Manual Rev 2.0 September 2015 Mains Multiplier 5 Mains Multiplier 7 Mains Multiplier 8 essentia User Manual Rev 2.0 September 2015 Mains Multiplier 5 Mains Multiplier 7 Mains Multiplier 8 Contents essentia Introduction... page 4 Description... page 5 Safety precautions... page 6 Connections...

More information

Rescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference

Rescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference Please dispose of Packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

Instructions for Fitting, Operating and Maintenance Canopy Door RE / (St.: )

Instructions for Fitting, Operating and Maintenance Canopy Door RE / (St.: ) EN Instructions for Fitting, Operating and Maintenance Canopy Door 1 818 012 RE / (St.: 12.2010) 12.2010 ENGLISH Contents 1 Safety Instructions... 3 1.1 Qualified persons... 3 1.2 Symbols and signal words

More information

Mounting instructions Directions for use MAKROLUX. Halogen-spot lamp for consulting room and hospital

Mounting instructions Directions for use MAKROLUX. Halogen-spot lamp for consulting room and hospital Mounting instructions Directions for use MAKROLUX Halogen-spot lamp for consulting room and hospital Stand model with five-feet base, design without heat protection filter 1100 1012 00 Stand model with

More information

Before using the new measuring rod, please take a little time to read the following safety instructions.

Before using the new measuring rod, please take a little time to read the following safety instructions. 1. Congratulations! In the seca 242/seca 245 electronic measuring rod, you have acquired a highly accurate and simultaneously sturdy piece of equipment. seca has been putting its experience at the service

More information

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL MOTORTECH Tools & Test Equipment for Ignition Systems P/N 01.10.019 Rev. 01/2013 Copyright Copyright 2012 MOTORTECH GmbH. All rights reserved. Distribution

More information

Owner s (Operator s) Manual & Safety Instructions Manually Lever Operated Chain Hoist Model LX1B

Owner s (Operator s) Manual & Safety Instructions Manually Lever Operated Chain Hoist Model LX1B Owner s (Operator s) Manual & Safety Instructions Manually Lever Operated Chain Hoist Model LX1B BULLETIN NO. LX-0804-CE-06 WARNING This equipment must not be installed, operated or maintained by any person

More information

Mighty Mack Wheeled Walker

Mighty Mack Wheeled Walker Mighty Mack Wheeled Walker Handle with lever brake Backrest Handle height adjustment knob Brake cable Extra wide padded seat Shopping basket Side brace 7 inch (180 mm) wheels user guide Prior to use please

More information

freedom through lightweight solutions

freedom through lightweight solutions freedom through lightweight solutions Mangar Inc. 3020 Legacy Dr. Suit 100-301 Plano, TX 75023 tel: 1-800-901-5269 www.mangarusa.com Mangar International Presteigne Powys LD8 2UF Wales, UK tel: +44(0)1544

More information

Bedienungsanleitung Schüttler KM. Operating Instructions Shaker KM. Mode d emploi Agitateur KM KM 2 KM 2 AKKU KM CO 2 VERSION 04 / 2016

Bedienungsanleitung Schüttler KM. Operating Instructions Shaker KM. Mode d emploi Agitateur KM KM 2 KM 2 AKKU KM CO 2 VERSION 04 / 2016 Bedienungsanleitung Schüttler KM Operating Instructions Shaker KM Mode d emploi Agitateur KM VERSION 04 / 2016 KM CO 2 KM 2 KM 2 AKKU Order-no. 0091005 Operating Instructions Shaker KM D Thank you for

More information

Operation Manual Flexible Claw couplings according to KWN 22013

Operation Manual Flexible Claw couplings according to KWN 22013 Operation Manual Flexible Claw couplings according to KWN 22013 Author: Dipl.-Ing.. V. Hausdorf 19.02.2007 gez. V. Hausdorf Approved: Dipl.-Ing. H. Neugebauer 19.02.2007 gez. H. Neugebauer Name Date Signature

More information

USER MANUAL. Item: #13246 Stand-Aid Lift. Drive Medical Design and Manufacturing Push Handle. Base Width Adjustment Handle.

USER MANUAL. Item: #13246 Stand-Aid Lift. Drive Medical Design and Manufacturing  Push Handle. Base Width Adjustment Handle. USER MANUAL Item: #13246 Stand-Aid Lift Push Handle Base Width Adjustment Handle Mast Sling Attachment Hook Adjustable Knee Pad Front Caster W/Brake Foot Plate Front Caster W/O Brake Rev1.06.11.14 IMPORTANT

More information

ELECTRIC CAR POLISHER

ELECTRIC CAR POLISHER ELECTRIC CAR POLISHER MODEL NO: CP254 PART NO: 6462108 OPERATION & MAINTENANCE INSTRUCTIONS LS0610 INTRODUCTION Thank you for purchasing this CLARKE electric car polisher. Before attempting to use this

More information

Operation Manual. Easy Sun PARASOL Sunshade. Introduction

Operation Manual. Easy Sun PARASOL Sunshade. Introduction D GB F L Operation Manual Easy Sun PARASOL Sunshade Introduction SUN GARDEN offers you, with the Easy Sun PARASOL Sunshade, a high quality technically advanced and long-lasting product. It is constructed

More information

Quick Guide. brite Advanced Retail scale

Quick Guide. brite Advanced Retail scale Quick Guide brite Advanced Retail scale 2 METTLER TOLEDO Quick Guide brite Advanced Contents 1 Your new retail scale...4 1.1 Safety instructions...4 1.2 Further documents...4 1.3 Maintenance...4 1.4 Intended

More information

Instruction Manual. Revision no.: ENG-0001 FILON FUTUR S FILON FUTUR M

Instruction Manual. Revision no.: ENG-0001 FILON FUTUR S FILON FUTUR M Instruction Manual Revision no.: ENG-0001 FILON FUTUR S FILON FUTUR M Preamble Notes regarding this instruction manual This ORIGINAL INSTRUCTION MANUAL provides the knowledge required for the safe operation

More information

Installation Instructions

Installation Instructions ``````````````````````` Wolf cdn een n en Installation Instructions SDS SPRINGLESS DOOR SYSTEM 230VAC 1PH Date: 23.03.2016 Version: II-SDS-001-01 1 1 1. SAFETY DIRECTIONS Basic Directions This system has

More information

TIC 300 PRO. Users Manual Mode d emploi Bedienungshandbuch Manual d uso Manual de uso. Non Contact AC Voltage Detector. High Energy Tic Tracer

TIC 300 PRO. Users Manual Mode d emploi Bedienungshandbuch Manual d uso Manual de uso. Non Contact AC Voltage Detector. High Energy Tic Tracer TIC 300 PRO High Energy Tic Tracer Non Contact AC Voltage Detector Users Manual Mode d emploi Bedienungshandbuch Manual d uso Manual de uso TIC 300 PRO High Energy Tic Tracer Non Contact AC Voltage Detector

More information

Eva400EE/Eva400EM. Functional inspection. Always read the manual. SystemRoMedic TM. Manual - English

Eva400EE/Eva400EM. Functional inspection. Always read the manual. SystemRoMedic TM. Manual - English DRAWN APPROVED BY STATUS: COMMENTS: NAME DATE TITLE SIZE MATERIAL: SCALE:1:10 DW Eva400EE/Eva400EM SystemRoMedic TM Manual - English 2 3 1 5 4 6 7 REVISION HISTO A REV. DESCRIPTION 3 4 5 6 7 2 B C D 13

More information

H-1465 OR-T 300. Battery-hand tool for plastic strapping. Before using the tool, read the operating instructions carefully. 08/07

H-1465 OR-T 300. Battery-hand tool for plastic strapping. Before using the tool, read the operating instructions carefully. 08/07 H- OR-T 00 Battery-hand tool for plastic strapping Before using the tool, read the operating instructions carefully. 08/0 ORGAPACK OR-T 00 TABLE OF CONTENTS TECHNICAL DATA Technical data General information

More information

Roze Stand Up Patient Lift

Roze Stand Up Patient Lift User Manual Roze Stand Up Patient Lift DEALER: This manual MUST be given to the user of this product. USER: BEFORE using this product, read this manual and save for future reference. For more information

More information

Off-line filter system

Off-line filter system Off-line filter system 30 NFF2, 50 NFF2, 80 NFF2 RE 51433-B/04.10 Replaces: -.- English Operating instructions The data specified above only serve to describe the product. No statements concerning a certain

More information