HPS Titan. Encapsulated Transformers for Harsh Environments

Transcription

1 HS Titan Encapsulated Transformers for Harsh Environments

2 HS Titan Encapsulated Transformers for Harsh Environments The HS Titan line of transformers have been designed for installation in harsh environments where efficiency and performance are key. Typical applications include institutional, commercial, industrial, petrochemical, marine, mining, etc. HS Titan designs provide: Superior erformance Compact Efficient Design Easy Installation and Hook-up HS Titan Series transformers are UL Listed for Class 1, Division 2, roups A, B, C, and D Hazardous Locations and also meet ABS Type Approval for Marine Duty Service and Offshore Applications - Electrical Distribution and ropulsion. With a North American Temperature Classification of T3C, the HS Titan Series will remain cool under load. HS TITAN Single hase HS TITAN Three hase ALICATIONS etrochemical Marine Industrial AOVALS ANSI/ISA File No. E (Class 1, Division 2, roups A, B, C, and D Hazardous Locations) - T3C Temperature Classification UL 508 Listed - File No. E UL Certificate No. 04-HS435190/1-DA (Marine Duty Service and Offshore Applications) ABS Type Approval Oil & as Mining Wastewater

3 HS Titan Standard Features Features Single hase Three hase Voltage roups 5 standard voltage groups 5 standard voltage groups s 0.5 to to 150 Frequency 60 Hz (50/60 Hz on units with 380V primary) 60 Hz (50/60 Hz on units with 380V primary) Electrostatic Shield Optional on 0.50 Standard on 0.75 to 37.5 Standard on all units Encapsulated Enclosure All units are encapsulated with electrical grade silica sand and resin compounds Heavy Duty Type 3 Optional Type 4, 4X (stainless steel) and 12 Heavy Duty Type 3 Optional Type 4, 4X (stainless steel) and 12 Optional gasket kit Terminations Front accessible separated high and low voltage lead wires or copper tabs Top accessible separate high and low voltage lead wires or copper tabs Insulation System Mounting Conduit Knockouts Approvals Warranty 130 C (80 C rise) up to C (115 C rise) 1.5 to 37.5 Standard wall mounting with keyhole mounting slots. Lifting provisions standard from 5 to C (80 C rise) up to 5 (Optional on 6 to 150 ) 180 C (115 C rise) 6 to 150 Standard wall mounting with keyhole mounting slots 2 to 15 (Optional wall mounting kit available for 30 and 45 ). Floor Mounted 25 to 150. Lifting provisions standard on 6 to 150. For rear and side entry into an easily accessible and spacious wiring compartment. ANSI/ISA File No. E (Class 1, Division 2, roups A, B, C, and D Hazardous Locations) - T3C Temperature Classification UL 508 Listed - File No. E UL Certificate No. 04-HS435190/1-DA (Marine Duty Service and Offshore Applications) ABS Type Approval All HS standard catalog encapsulated transformers come with a 10 year limited warranty (lease refer to the HS standard Transformer roducts Warranty for full details) Options and Accessories The following options and accessories are available on all standard and custom three phase encapsulated hazardous location transformers. Optional Type 4/12 asket Kits reviously ordered three phase HS Titan encapsulated transformers in standard Type 3 rated NQT enclosures can easily be converted to a Type 4 or 12 rating by ordering and installing the appropriate gasket kit as listed in the table on page 6. Optional Stainless Steel Enclosure Optional Type 4 rated NQT stainless steel enclosures are identical to the standard steel enclosure designs, but are designed using Type 316 stainless steel in accordance with ANSI, NEMA, UL and ABS requirements for indoor, outdoor and marine duty applications. If your application calls for a HS Titan Series unit in a stainless steel enclosure, just add the suffix 7 to the end of the standard HS part number. (e.g. 045KBKF is a standard unit. For stainless steel change the part number to 045KBKF7.)

4 HS Titan Encapsulated Transformers for Harsh Environments Single hase roduct Specifications 208/240/277V rimary, 120/240V Sec. 60 Hz 600V rimary, 120/240V Sec. 60 Hz For shielded unit 0.50, replace the suffix CB with a KB 0.50 QC50YECB NQ QC75YEKB NQ Q1C0YEKF NQ Q1C5YEKF NQ Q002YEKF NQ Q003YEKF NQ Q005YEKF NQ Q007YEKF NQ Q010YEKF NQ Q015YEKF NQ Q025YEKF NQ Q037YEKF NQ8 476 For shielded unit 0.50, replace the suffix CB with a KB 0.50 QC50ECB NQ QC75EKB NQ Q1C0EKF NQ Q1C5EKF NQ Q002EKF NQ Q003EKF NQ Q005EKF NQ Q007EKF NQ Q010EKF NQ Q015EKF NQ Q025EKF NQ Q037EKF NQ /380V rimary, 120/240V Sec. 50/60 Hz Export* rimary, 120/240V Sec. 50/60 Hz For shielded unit 0.50, replace the suffix CB with a KB 240 X 480V rimary, 120/240V Sec. 60 Hz For shielded unit 0.50, replace the suffix CB with a KB 0.50 QC50FECB NQ QC75FEKB NQ Q1C0FEKB NQ Q1C5FEKF NQ Q002FEKF NQ Q003FEKF NQ Q005FEKF NQ Q007FEKF NQ Q010FEKF NQ Q015FEKF NQ Q025FEKF NQ Q037FEKF NQ QC50LECB NQ QC75LEKB NQ Q1C0LEKB NQ Q1C5LEKF NQ Q002LEKF NQ Q003LEKF NQ Q005LEKF NQ Q007LEKF NQ Q010LEKF NQ Q015LEKF NQ Q025LEKF NQ Q037LEKF NQ8 476 For shielded unit 0.50, replace the suffix CB with a KB 0.50 QC50XECB NQ QC75XEKB NQ Q1C0XEKB NQ Q1C5XEKF NQ Q002XEKF NQ Q003XEKF NQ Q005XEKF NQ Q007XEKF NQ Q010XEKF NQ Q015XEKF NQ Q025XEKF CF CF 37.5 Q037XEKF CF CF CF = consult factory *Export = 190/200/208/220/240 1 X 380/400/415/440/480 1 rimary Volts Note 1 : The primary voltage ratio of 240 or 480 is available at 60Hz only with secondary voltage of approximately 130/262V.

5 Single hase Enclosure Drawings and Dimensions A B D ØN.39 Figure 1 C F E A/2 H ØN K (K.O.) K (K.O.) FONT VIEW SIDE VIEW VIEW A ØM B ØN D.34 Figure 2 C F E K (K.O.) K (K.O.) H ØN L FONT VIEW SIDE VIEW VIEW Fig # A B C D E F H K 1 L M N NQ NQ NQ X 1.13 X NQ X 1.13 X NQ X 1.13 X NQ X NQ X NQ X NQ X Knockout (K) sizes are actual diameter of knockout, not conduit sizes Optional stainless steel enclosures are available

6 HS Titan Encapsulated Transformers for Harsh Environments Three hase roduct Specifications 480V rimary, 208Y/120V Sec. 60Hz 600V (Y) rimary, 240V (D) Sec. 60Hz 2 002KBKB NQT KBKB NQT KBKF NQT KBKF NQT KBKF NQT KBKF NQT KBKF NQT KBKF NQT KBKF NQT KBKF NQT DKB NQT DKB NQT DKF NQT DKF NQT DKF NQT DKF NQT DKF NQT DKF NQT9 CF DKF NQT10 CF DKF NQT11 CF CF = consult factory 480V(D) rimary, 240V(D) Sec. 600V rimary, 208Y/120V Sec. 60Hz 2 002KDKB NQT KDKB NQT KDKF NQT KDKF NQT KDKF NQT KDKF NQT KDKF NQT KDKF NQT KDKF NQT KDKF NQT Hz 2 002BKB NQT BKB NQT BKF NQT BKF NQT BKF NQT BKF NQT BKF NQT BKF NQT BKF NQT BKF NQT , 480V rimary, 480Y/277V Sec. 60Hz 2 002QKKB NQT QKKB NQT QKKF NQT QKKF NQT QKKF NQT QKKF NQT QKKF NQT QKKF NQT QKKF NQT10 CF QKKF NQT11 CF CF = consult factory Optional asket Kits Selection Table Enclosure NQT3 NQT4 NQT5 NQT6 NQT7 NQT8 NQT9 NQT10 NQT11 asket Kit /N NQT3K NQT4K NQT5K NQT6K NQT7K NQT8K NQT9K NQT10K NQT11K

7 Three hase Enclosure Drawings and Dimensions A D Lifting Lifting rovision rovision on Lifting NQT4, on rovision NQT4, NQT5 NQT5 and on NQT6. NQT4, and NQT6. NQT5 and NQT6. A A D D H H Figure 1 Easy access to wiring Easy compartment access to Easy wiring access compartment to wiring compartment via (4) HHCS on top via cover. (4) HHCS on via top (4) cover. HHCS on top cover. E E C q 1.0(2) B E C q 1.0(2) B K (K,O)(4) K (K,O)(4) q N(4) q N(4) q N(4) All Dimensions in Inches All Dimensions All in Inches Dimensions in Inches FONT VIEW FONT VIEW FONT VIEW FONT VIEW SIDE VIEW SIDE VIEW SIDE VIEW EA VIEW EA VIEW EA VIEW AA A F L F L H H Typ Typ. Typ. Easy Easy access access Easy to access to wiring wiring to compartment wiring compartment via via via ABS ABS approved ABS approved hardware hardware on on top top cover. on cover. top cover Typ. Typ. K (K,O)(4) K (K,O)(4) Figure 2 The The Lifting Lifting The Lifting rovisions rovisions on on NQT7, on NQT7, NQT8 NQT8 and NQT8 and NQT9 NQT9 and NQT9 enclosures enclosures are are are located located in in the the wiring in wiring the wiring compartment. compartment. C C M M DD D FONT FONT VIEW VIEW θ N(4) θ N(4) E E B B SIDE VIEW SIDE SIDE VIEW VIEW Typ. Typ. All Dimensions in Inches EA VIEW Fig # A B C D E F H K 1 L M N NQT X NQT X NQT X NQT X NQT X NQT X NQT X NQT X NQT X NQT X Knockout (K) sizes are actual diameter of knockout, not conduit sizes Optional stainless steel enclosures are available

8 EUOE CANADA EUOE UNITED INDIA STATES INDIA CANADA HS 595 Southgate Drive uelph, Ontario N1 3W6 Tel: (519) Fax: (519) Toll Free: UNITED STATES HS 1100 Lake Street Baraboo, Wisconsin Tel: (608) Fax: (608) Toll Free: EUOE Hammond ower Solutions Via Angelo Schiatti, Meledo di Sarego (VI) Italy Tel: Fax: INDIA ETE - Hammond ower Solutions vt. Ltd. -9 to 11, Bhavya s Sree Arcade Erragadda, Hyderabad, A Tel: , Fax: marketing@petetransformers.com Distributed by: Scan this Q code with your smartphone to view additional information on the HS Titan. Literature No.: TSETB8 Issue Date: October 2014