Segatrici. saw machine. Smerigliatrici. saw bench grinders. Elettroutensili. Utensili. Fumes aspirators, Aspiratori. Attrezzatura per.

Size: px
Start display at page:

Download "Segatrici. saw machine. Smerigliatrici. saw bench grinders. Elettroutensili. Utensili. Fumes aspirators, Aspiratori. Attrezzatura per."

Transcription

1 POWER MACCHIE, TOOLS, ATTREZZI MACHIERY, E COMPOETI WORKSHOPPER EQUIPMETS OFFICIA Trapani machines Drilling pag page Torni lamps for machine Lathes pag page Segatrici Band saw machine pag page Smerigliatrici Mitre saw bench grinders pag page Elettroutensili Power tools pag page Utensili Drill accessories pag page Fumes aspirators, vacum cleaners Aspiratori pag page Attrezzatura per officina equipments Workshop pag page Elementi per il montaggiotools Clamping 8 8 pag page Prodotti per imballaggio Packaging equipments 9 9 pag page

2 DRILLIG MACHIE PECK 18 ITEM: PECK18 - Spindle travel 90 mm. - Adjustable spindle depth mechanical device - Working surface of the table 240 x 240 mm - Table is raising by rack and pinion - Table and base with T-slots - Tilting table with incorporated sliding vice - Vice width of jaws 80 mm. - Column diameter 80 mm. - Clearance between centre spindle and column 200 mm. - Max. clearance between spindle and table 630 mm. - umber of spindle speeds o Speed range Rpm Motor power capacity Kw Electrical supply 380V 50Hz 3ph ,00 18/20 90 CM MAS , REF , VARI ,00.2

3 DRILLIG MACHIE PECK 25 ITEM: PECK25 - Morse Taper attachment MT 3 - Adjustable spindle depth mechanical device - Table is raising by rack and pinion - Table and base with T-slots - Tilting table with incorporated sliding vice - Vice width of jaws 100 mm - Column diameter 100 mm - Clearance between centre spindle and column 250 mm - Max. clearance between spindle and table 620 mm - Max. clearance between spindle and base 1100 mm - umber of spindle speeds o Speed range Rpm Motor power capacity Kw Eletrical supply 380V 50Hz 3ph ,00 25/ CM MAS , REF , VARI ,00.3

4 DRILLIG MACHIE PECK 30 ITEM: PECK30 - Drilling capacity 30/32 mm - Spindle travel 110 mm - Manual spindle feed - Spindle attachment MT 3 - Spindle motor power kw.1,1 - Distance from spindle center to column surface 280 mm - Distance from spindle to table 50 ~ 600 mm - Distance from spindle to base 1200 mm - Dimensions of the table 300 x 300 mm - Table is tilting and swivelling type with vice width of jaws 100 mm - umber of spindle speeds 14 - Spindle speed variation by V-belts and pulleys - Spindle speeds range rpm 35 ~ Eletrical supply 380V 3ph. 50Hz - Approx. net weight Kg ,00 30/ CM MAS , REF , VARI ,00.4

5 SESITIVE BECH DRILLS WITH 6 SPEEDS ITEM: 0360 Sensitive bench drill with the highest accuracy, mounted on high-speed ball bearings of the best brands. The ground steel bush pulley holder and spindle shaft holder as also the mechanic cast iron column are highly resistant. These features ensure long machine life. 6-speed drill ( ). B10 spindle coupling, three-phase 2-pole motor rpm, 0.25 HP. It is supplied with three B , SAFETY SHIELDS FOR DRILLS ITEM: 1040 Impact-proof transparent plastic shield. Chrome-plated attachment M M ,00 177,00 107,00 186, ATTACHMETS FOR SAFETY SHIELDS ITEM: 1010 Chrome-plated side attachment with lamp holder hole ,20 74,50 With micro-switch. Chrome-plated universal attachment ,00 139,00 SAFETY SHIELDS FOR LATHES ITEM: 1020 Impact-proof transparent plastic , , , , , , , , ITEM: 1025 Polycarbonate shield, steel structure with 30 mm Ø hole for attachment to the lathe ,00 142,00 150,00 155,

6 SAFETY SHIELDS FOR GRIDIG WHEELS ITEM: 1035 Slotted bracket for quick mounting on any grinding wheel, friction joint for perfect positioning. Shield with the optical area made of replaceable impact-proof plastic and of glass ,00 LED LAMPS FOR MACHIES ITEM: x 1 W light emitting diodes. Lamp without power supply feeder with 24 V Voltage, AC/DC. Power consumption of approx. 10 W with IP67 protection, protection class III. Switching system with switch control. Anodised aluminium body, black lamp with glass protector. Painted steel tube arms, deep black colour, joint with clutch. Special features: Flood with 40 emission angle ,00 COECTORS FOR MACH LED LAMPS ITEM: 1553 Connectors suitable for all the MACH LED lamps, box of 1 black piece CO CO 02 26,00 26, V M12 4A.6

7 LED LAMPS FOR MACHIES ITEM: x 5 W light emitting diode. Lamp without power supply feeder with 20-28V Voltage, DC. IP67 protection, protection class III. Switching system without control. Anodised aluminium body, anodised aluminium lamp body black colour with transparent screen. Fixing: Screw STA ,00 22, ITEM: x 5 W light emitting diode. Lamp without power supply feeder with 20-28V Voltage, DC. IP67 protection, protection class III. Switching system without control. Anodised aluminium body, anodised aluminium lamp body black colour with transparent screen cover. Fixing: Screw STA ,00 22, ITEM: x 5 W light emitting diode. Lamp without power supply feeder with 20-28V Voltage, DC. IP67 protection, protection class III. Switching system without control. Anodised aluminium body, anodised aluminium lamp body black colour with transparent screen cover. Fixing: Screw STA ,00 22,

8 LATHE ECOCA TECHICAL CHARACTERISTICS - Height of centres: 230 mm - Swing over bed: 460 mm - Swing over cross slide: 258 mm - Swing over gap: 670 mm - Width of bed: 300 mm - Spindle bore: 58 mm - CAM-LOCK 6" - Taper of spindle bore: MT6 - of speed 12, range of single speed rpm - Cross slide travel 247 mm - Upper slide travel 132 m - Longitudinal feed range 0,05-0,82 mm - Cross feed range 0,02-0,4 mm - Inch threads 4-56 TPI - Metric threads P.0,5-P.7 - Main motor power 7,5 HP - Cooling system motor power 0,125 HP - Quill travel mm - Quill taper CM4 - Overall dimension cm (LxWxH): L216 x W81 x H123 - Weight 1650/2000 Kg ,00 ACCESSORIES (included) - Simple guide self-centering chuck (3+3 jaws for internal/external) - Plateau 4 indipendent jaws (diam. 320 mm) - Drive plate diam Fix rest and removable rest - Cooling system - Alogen Lamp - Lathe carriage safety guard - Tools box. Positioning stands. - ALGRA tool holder (B) DIGITAL READOUT - Layout 1/2-3 axis (n.2 display) - Green umeric and Alphanumeric display height 14 mm - Resolution: 0,01-0,005-0,002-0,001-0,0005 selectable from keyboard - Beam/diameter conversion - bidirectional counting - Dimensions setting through keyboard - Separate axis reset - Automatic research index pulse - Standby ignition test Abs absolute reading - Protected warehouse 200 tools - Incremental reading - Data end work automatic rescue - Data automatic rescue during power failure - Algebraic sum between axis (only 3-axis) - Mm/inch conversion - Linear error compensation - Calculation taper - Power supply: 110Vac-220vac +/-15% 1490VISU ,00.8

9 LEVELIG MOUTS ITEM: 1300 Zinc plated steel base, anti-vibration sole in anti-oil and anti-slip rubber compound, removable threaded shank complete with two hexagonal nuts and two galvanised steel washers, preserves machine tools simple, fast and accurate positioning and levelling of machine tools. 01 D H ,88 80 M , M , M , M20 62 ATI-VIBRATIO STADS ITEM: 1310 Zinc-plated steel base, anti-vibration sole in anti-oil and anti-slip rubber compound, with two stages of different density separated by a metal reinforcement. 01 D H R 37,93 80 M R 43, M R 53, M VIBRATIO-COTROL MOUTS ITEM: 1315 nut and 1 washer. Base and spindle not assembled. 01 D ,00 80 H , , ,

10 ITEM: SIP 130 Suitable for people who frequently move and are particularly careful to quality/price ratio. Aluminium structure, adjustable cutting angle ranging from 0 to 45, continuous cutting speed change, arc-shaped body frame locking device making the structure easy to transport. Overdimensioned piece locking vice made from cast iron and aluminium, with steel inserts, Base with non-scratch feet. IVERTER BADS SAWS MACHIE EASY CUT , Blade width 13 x 0.65 mm ITEM: SIP 140 Suitable for people who frequently move and are particularly careful to quality/price ratio. Aluminium structure, 1010 Watt, adjustable cutting angle ranging from 0 to 60, continuous cutting speed change, arc-shaped body frame locking device making the structure easy to transport. Piece locking vice made from cast iron and aluminium, with steel inserts, base with non-scratch feet. POWERFLEX M42 BLADE - A7012 A05 6/10 8/12 10/ ,83 10 IVERTER BADS SAWS MACHIE EASY CUT , Blade width 13 x 0.65 mm ITEM: SIP 170 Suitable for people who frequently move and are particularly careful to quality/price ratio. Aluminium structure, 2000 Watt, Adjustable cutting angle ranging from 0 to 60, continuous cutting speed change, arc-shaped body frame locking device making the structure easy to transport. Piece locking vice made from cast iron and aluminium, with steel inserts, base with non-scratch feet. POWERFLEX M42 BLADE - A7012 A05 6/10 8/12 10/ ,80 10 IVERTER BADS SAWS MACHIE , POWERFLEX M42 BLADE - A7013 Blade width 13 x 0.9 mm A05 6/10 8/ ,

11 COLUM FOR BADS SAWS MACHIE SIP 170 ITEM: ,00 15 STAD FOR IVERTER BADS SAWS MACHIE SIP ITEM: 2299 Foldable moving stand for portable band saw machines, can be positioned in three different highs. Can be to the operator. Wheels are equipped with brake, for maximum stability , ITEM: 3300 Supply voltage 230 V, single-phase motor with 0.37 kw power, cutting from 0-45 to the right. Sturdy and PORTABLE BAD SAWS , CUT-OFF BECH SAWS FOR PUCHES ITEM: 3310 of stainless steel, aluminium, brass, copper, nylon, etc. It leaves no burrs and does not alter the hardening treatment, 1HP/0.75 kw motor, three-phase supply voltage 380 V, on request available also with singlephase supply voltage 220 V for hobbyists. 150 x mm Ø abrasive disc for high speeds, approximate rotation speed of 6000 rpm, swivel graduated vice for cuts up to 45. Low-voltage start micro-switch in the handle, wraparound casing for total protection of the abrasive disc. 02 Ø ,

12 O-REIFORCED CUTTIG DISCS ITEM: G0405 Organic aluminum oxide binder. Treated and hardened steel. Dry operation on stationary machines. G G G01 8,40 10,50 25 MITRE SAW MACHIE LP 275 ITEM: Movable head 45 right and left - Reduction unit in oil bath - Membrane pump for coolant - Vice complete with anti-burr device - Bar stop - Service tools - Instruction manual and spare parts - 24 V low voltage installation with hold-to-run head control knob - Overall dimensions: 830 x 900 x 1025 mm - Steel pedestal ,00 98 BAD SAW MACHIE SIP 215 ITEM: Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Strong band guides with tight stress-raiser bearings - Vice with a device for quick lock handle - Cutting range 0-45 right - Adjustable stop for cuts of the same size - 24 V low tension plant - Overall dimensions: 1000 x 1155 x 1600 mm - 0,06 kw power-driven pump for band cooling ,

13 BAD SAW MACHIE SIP 280 ITEM: Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear and tempered and ground worm - Strong band guides with tight stress-raiser bearings and adjustable widia tips. - Band stretching is obtained by electro-mechanical blade tensioner with micro switch - Vice with a device for swift locking by excentric means handle, and on the blade - Cutting thickness 1,2 mm - Cutting range 0 to 60 right - Adjustable stop for cuts of the same size - 24 V low tension plant - 0,06 kw power-driven pump for band cooling , BAD SAW MACHIE SIP 280 ID ITEM: Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Strong band guides with tight stress-raiser bearings and adjustable widia tips - Band stretching is obtained by electro-mechanical blade tensioner with microswitch - Vice with a device for swift locking by excentric means handle, and on the blade - Cutting thickness 1,2 mm - Cutting range 0 to 60 right - Adjustable stop for cuts of the same size - 24 V low tension plant - 0,06 kw power-driver pump for band cooling ,

14 BAD SAW MACHIE SIP 330 ID ITEM: Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Strong band guides with tight stress-raiser bearings and adjustable widia tips - Band stretching is obtained by electro-mechanical blade tensioner with microswitch - Wide rotating material support table handle, and on the blade - Cutting thickness 1,2 mm - Cutting range 45 left 60 right - Adjustable stop for cuts of the same size - 24 V low tension plant , CIRCULAR MITRESAWS WITH BLADE Ø300 ITEM: 2270AL Professional machine for alluminium cutting. Powerful induction motor, upper table extra-rigid, shock absorber with pre tempered compression spring, couplings with bearing. On request, with blade for wood AL 718, R1 88,00.14

15 CIRCULAR MITRESAWS WITH BLADE Ø315 ITEM: 2275LG Professional machine for wood cutting. Powerful induction motor, upper table extra-rigid, shock absorber with pre tempered compression spring, couplings with bearing. On request, with blade for alluminium LG 798, R1 82,00 MAUAL CLAMP FOR SIP ITEM: 2276 Manual clamp for SIP 30 and SIP 31 series ,00 PORTABLE FOLDIG TABLE FOR SIP ITEM: 2277 Portable folding table for SIP 30 and SIP ,

16 ITEM: 2280AL Professional machine for alluminium cutting. Powerful induction motor, the double shock absorber it lowers the blade holder head effortlessly, All movements with BEARIGS which give smoothness, rigidity and precision and are free of maintenance. CIRCULAR MITRESAWS FOR ALLUMIIUM WITH BLADE Ø AL 1.975, R1 110,00 COLUM FOR MITRESAWS SIP 35 ITEM: ,00 38 COLUM OF SUCTIO FOR MITRESAWS SIP 35 ITEM: 2283 Column complete of suction for SIP ,00 48 BECH GRIDERS 230V ITEM: 3102 Industrial bench grinder Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel to be ordered separately , ,00 16 A1.16

17 BECH GRIDERS 400V ITEM: 3104 Industrial bench grinder Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel to be ordered separately ,00 11 A ,00 1 A2 ITEM: 3106 Industrial combined bench grinder (GRIDIG WHEEL/BRUSH) Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel and brushes to be ordered separately ,00 COMBIED BECH GRIDERS 230V 2800 COMBIED BECH GRIDERS 400V ITEM: 3108 Industrial combined bench grinder (GRIDIG WHEEL/BRUSH) Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel and brushes to be ordered separately ,00 A ,00 1 A2 COLUM FOR BECH GRIDERS ITEM: A1 140,00 A A2 174,00 A VR 10,34 ECOLOGICAL BECH GRIDERS 400V ITEM: 3116 Industrial bench grinder Made in Italy designed with a view to fully comply with workplace health and safety regulations, complete with column and integrated vacuum system. Grinding wheels to be ordered separately ,

18 COMBIED ECOLOGICAL BECH GRIDERS 400V ITEM: 3118 Industrial combined bench grinder (GRIDIG WHEEL/BRUSH) Made in Italy designed with a view to fully comply with workplace health and safety regulations, complete with column and integrated vacuum system. Grinding wheel and brushes to be ordered separately , GRIDIG WHEELS ITEM: G7200 Grinding wheels suitable for machining steels, ferrous material in general. Grey Colour. G G G G G01 33,00 33,00 47,00 47,00 BUSCHIG FOR GRIDIG ITEM: 3121 Plastic busching for grinding wheel bore ,50 0,50 0,50 0, ,50 0,50 0,52 1,00 PRECISIO GRIDIG WHEELS ITEM: 38A Aluminium oxide. Suitable for machining steels and HSS steels, ferrous material in general and hard bronze. Friable. Cold cutting. White colour. G G G G G01 39,35 39,35 64,38 64,38 4 OTES - Grinding wheels are complete with reducing sleeves where necessary WHEEL BRUSHES ITEM: G4905 High resistant crimped wire. For deburring, etching and polishing. K = multihole reduction kit G01 D E C F G /0 22, G /1 16, G /0 20,

19 BOSCH TOOLS ICOS TABLE/CHART.19

20 CORDLESS REVERSIBLE DRIVERS 10,8V BATTERY ITEM: GSR 10.8-LI PROFESSIOAL Compact and powerful with Bosch Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. Motor brake for fast and accurate screwing, integrated LED for lighting the work area, ergonomic handle with Softgrip coating , ,00 2 1/ / lithium batteries 1.3 Ah Charger AL 1115 CV Case L-BOXX Dimensions: 143 x 178h mm ITEM: GWI 10.8 V-LI CORDLESS AGLED REVERSIBLE DRIVERS 10,8V BATTERY Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. Motor brake for fast and accurate screwing. Electronic setting of the tightening torque, ergonomic handle with Softgrip coating and practical hook ,8AG ,00 2 1/ /5 1 2 lithium batteries 1.3 Ah Charger AL 1130 CV Case L-Box Dimensions: 103 x 295 h mm CORDLESS AGLED DRILL/DRIVERS 10,8V BATTERY ITEM: GWB 10,8-LI AG PROFESSIOAL Very compact tool: adjustable and very compact head (only 11 cm) with 10 mm Auto-Lock chuck. Extremely versatile use, thanks to the 5-position adjustable head: 0 /22.5 /45 /67.5 /90. High rpm, from 0 to 1300 r/ min. for fast work progress - best used for drilling. Motor brake for precise screwing work. Practical 3-LED battery charge level indicator. Exclusive Bosch Premium Lithium technology for a 400% longer battery life and unbeatable operating time. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Bosch Hyper Charge: thanks to rapid charging, the batteries are pre-charged to 75% after half of the total charging time. o memory effect: the battery can be recharged at any time regardless of the charge level without damaging the cells ,8AG , batteries with 1.3 Ah Lithium Charger AL 1130 CV Case L-BOXX Insert for L-BOXX Dimensions: 12 x 29.4 h mm.20

21 CORDLESS DRILL/DRIVERS 10,8V BATTERY ITEM: GSR 10,8-2-LI PROFESSIOAL With its mere 169 mm, it has the most compact design in its class. The 2-speed gears ensures a powerful torque of 30 m for drilling (up to 19 mm) and for driving (up to 7 mm). Bosch Premium Lithium technology provides an 400%.longer battery life Bosch Electronic Cell Protection (ECP) protects the battery against overload, overheating and total discharge. Bosch Hyper Charge: thanks to rapid charging, the batteries are charged to 75% after only half of the total charging time. o memory effect: the battery can be recharged at any time regardless of the charge level without damaging the cells. Motor brake for fast and accurate screwing , ,00 1/ /13 2 Lithium Batteries 1.3 Ah Charger AL 1130 CV Insert for L-BOXX Case L-BOXX Dimensions: 169 x 178 h mm CORDLESS DRILL/DRIVERS 14,4V BATTERY ITEM: GSR 14,4-2-LI PROFESSIOAL Low weight: only 1.3 kg for perfect handling and low-fatigue operation. 2-speed planetary gears redesigned for greater power and versatility of use in driving and drilling work. Exclusive Bosch Premium Lithium technology for 400% longer charge that with Electronic Cell Protection (ECP) protects the battery against overload, overheating and total discharge. Integrated LED for work area lighting even in dark places. The practical belt clip attachment allows one to keep the tool always within reach /LI , /15 2 batteries with 1.5 Ah Lithium Charger AL 1820 CV Case Insert for L-BOXX Dimensions: 196 x 226 h mm.21

22 CORDLESS DRILL/DRIVERS 14,4V BATTERY ITEM: GSR 14,4 V-LI PROFESSIOAL Extremely compact thanks to the smallest design (only 185 mm) in its class; low weight (only 1.7 kg) for perfect handling. Bosch Premium Lithium technology: the only one if its kind ensuring as much as 400% longer battery life and unbeatable battery power. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Integrated LED for work area lighting even in dark places. Motor brake for fast and accurate screwing. Ergonomic handle with reduced size and with Softgrip coating for effortless work , ,00 1/2 60/ x 3.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Insert for L-BOXX Dimensions: 185 x 227 h mm ITEM: GSR 14,4 VE-2-LI PROFESSIOAL ROBUST Powerful for challenging driving and drilling operations, extremely sturdy thanks to the Dura Shield shell, Bosch Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. EMP (Electronic Motor Protection) to protect the motor against overload and to guarantee a long service life tightening torque with progressive increase for an exact setup of all types of screws, metal auto-locking chuck with Auto-Lock for comfortable and simple tightening, integrated LED work area lighting, ergonomic handle with Softgrip coating ,4/ , x 3.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Dimensions: 213 x 253 h mm CORDLESS REVERSIBLE IMPACT DRILL/DRIVERS 14,4V BATTERY ITEM: GSB 14.4 V-LI PROFESSIOAL Powerful and compact, resistant even in heavy work, extremely sturdy thanks to the Dura Shield shell, Bosch Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. High-performance four-pole engine, integrated impact function, motor brake for fast and accurate screwing, auto-locking chuck with Auto-Lock for comfortable and simple tightening, integrated LED work area lighting, ergonomic handle with Softgrip coating and practical hook ,4/3P , / x 4.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Dimensions: 195 x 248 h mm.22

23 ITEM: GSR 18 V-EC CORDLES DRILL WIRELESS 18 V makes them always ready to use and provides better protection against dust and splashing water thanks to the absence of contacts of the new charger. From the compact shape, length of the head very contained (only 179 mm) for perfect handling and equipped with innovative battery technology "Coolpack" which ensure optimum heat dissipation, thus, extend the battery life up to 100%. Equipped with Electronic Cell Protection (ECP) protects the battery against overload, overheating and total discharge, the system "Electronic Motor Protection" (EMP) that protects the motor against overload and ensures a long service life, spindle AutoLock 13 mm for W , /26 2 lithium batteries 2.0 Ah wireless Wireless Charger Charging GAL 1830 W Fixing frame for the charger Case L-BOXX 136 ITEM: GSR 1800-LI CORDLESS REVERSIBLE DRILL/DRIVERS 18V Powerful, compact tool, featuring 25+1 torque adjustment stages for extremely accurate fastening tasks. Twospeed tool: optmised torque for screwdriving tasks and optimal drilling speed. ECP (Electronic Cell Protection) to prevent overload in case of high energy consumption, overheat and deep discharge. Up to 400% longer service life than the average. 10 mm Autolock chuck for perfect fastening of accessories, bit holder, speed controlled by trigger switch and rubberized ergonomically designed grip , /10 29/10 34/18 2 lithium batteries 1.5 Ah Charger AL 1814 CV Case L-BOXX Dimensions: 204 mm ITEM: GSR 18,0 V-LI PROFESSIOAL Extremely compact thanks to the smallest design (only 185 mm) in its class; low weight (only 1.8 kg) for perfect handling. Powerful 67 m torque thanks to the newly designed gears and the new high-performance 4-pole Bosch motor. 13 mm auto-locking chuck. Bosch Premium Lithium technology: the only one if its kind ensuring as much as 400% longer battery life and unbeatable battery power. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Integrated LED for work area lighting even in dark places. Motor brake for fast and accurate screwing. Ergonomic handle with reduced size and with Softgrip coating for effortless work , x 4.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Insert for L-BOXX Dimensions: 185 x 248 h mm.23

24 CORDLESS DRILL/DRIVERS 18V BATTERY ITEM: GSR 18 VE-2-LI PROFESSIOAL ROBUST Extremely powerful cordles drill, 80M for the toughest screwdriving and drilling application. Compared to Profesional version it is characterized by a KickBack Control (KBC) that defects sudden jamming and shuts the tool down, by ergonomic handle with softgrip coating and by a Electronic Motor Protection EMP) that protects the motor against overload and ensures a long lifetime , / x 4.0 Ah Lithium Charger AL 1860 CV Auxiliary handle Case L-BOXX Dimensions: 213 x 253 h mm ITEM: BDF 456 RFE CORDLESS DRILLS 18V BATTERY 4-pole motor with a 20% weight reduction, LED work area lighting. Variable speed and reversibility, electric brake and ergonomic Softgrip / , / x 3 Ah Li-ion Charger Belt clip Case CORDLESS ROTARY HAMMERS 18V BATTERY ITEM: GBH 18 V-LI COMPACT PROFESSIOAL The most compact in its class (total length of only 278 mm, incl. SDS Plus) for small to medium screw-driving and drilling operations on wood and metal. Pneumatic hammer mechanism, optimised for holes from 4 to 8 mm. Screwing: screws up to 6 mm diameter in wood. Bosch Premium Lithium technology: the only one if its kind ensuring as much as 400% longer battery life and unbeatable battery power. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Bosch Hyper Charge: thanks to rapid charging, the batteries are charged to 75% after only half of the total charging time. o memory effect: the battery can be recharged at any time regardless of the charge level without damaging the cells , x 2 Ah Lithium Charger AL 1820 CV Case L-BOXX Dimensions: 285 x 218 h mm.24

25 ITEM: BHR242RFE CORDLESS 18V BRUSHLESS DRILL HAMMERS With easy-action reversing switch, quick-coupling drill bit holder, 40-angle chisel orientation with a rubber battery holder BL/ , Fast charger 2 x 3.0 Ah batteries Lateral handle Rod of depth Dimensions: 328 x 85 x 213mm ITEM: GLI 10,8 V-LI BATTERY FLASHLIGHT 10,8V Powerful and bright 1-Watt LEDs with extremely clear light. All the advantages of lithium technology, handle with Softgrip coating and practical clip for hooking, uses Bosch 10.8 Volts lithium batteries, batteries and charger not included , , Dimensions: 158 x 52 h mm BATTERY FLASHLIGHT 14,4/18V ITEM: GLI VARILED PROFESSIOAL Extremely clear light, high brightness with three innovative and powerful LEDs, variable focused/diffuse light beam and nine adjustable lighting angles. All the advantages of lithium technology, extremely compact thanks to its innovative folding mechanism, clips for attaching, uses all Bosch 14.4 and 18 Volts lithium batteries, batteries and charger not included , , Dimensions: 130 x 80 x 40 h mm.25

26 LITHIUM BATTERIES ,8/2 80, ,4/4 160, /4 199, /4 269,00 36 LITHIUM BATTERIES ,8 85, , /4 227,00 IMH-HD BATTERIES ,4 286,00 WIRELESS BATTERIES 18V ,00 18 LITHIUM CELL BATTERY CHARGERS ,8/A 70, , ,00.26

27 ELECTRIC REVERSIBLE DRILLS ITEM: GBM 10 RE PROFESSIOAL Supply voltage 230 Volts, powerful and compact, electronic control for a precise initial drilling phase. Autolocking metal chuck for high precision and long service life, with anti-loosening safety screw during left-hand rotation, handle with Softgrip coating for a secure and comfortable grip, practical belt clip attachment, 43 mm collar Ø for use on a column support / , Dimensions: 249 x 194 h mm ITEM: GBM 13-2 RE PROFESSIOAL Supply voltage 230 Volts, powerful and accurate, fully equipped with ball and roller bearings for long service life and precise work, pre-set number of revolutions with setting wheel. Auto-locking metal chuck for high precision and long service life, with anti-loosening safety screw during left-hand rotation, 43 mm collar Ø for use on a column support / , /8 20/12 32/20 Auxiliary handle Depth stop 210 mm Dimensions: 332 x 208 h mm ELECTRIC REVERSIBLE AGLED DRILLS ITEM: GWB 10 RE PROFESSIOAL Supply voltage 230 Volts, slender cylindrical body, small angular size (only 23 mm) and very low height thanks to the cashed chuck. Pre-set number of revolutions with speed setting wheel, chuck rack , AG Dimensions: 298 x 76 h mm.27

28 ELECTRIC REVERSIBLE IMPACT DRILLS ITEM: GSB 16 RE PROFESSIOAL Supply voltage 230 Volts, compact and handy with sturdy metal gear housing, pre-set number of revolutions with setting wheel. Auto-locking metal chuck with Auto-Lock for quick one-handed tool changes, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and improve operation, 43 mm collar Ø for use also on a column support P/ , Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 285 x 214 h mm ITEM: HP1631 ELECTRIC REVERSIBLE IMPACT DRILLS Two functions: rotation + impact, rotation. Reversible, equipped with auto-locking chuck. Electric switch and ergonomic handle with Softgrip coating P/ , Lateral handle Auto-locking chuck ELECTRIC REVERSIBLE IMPACT DRILLS ITEM: GSB 19-2 RE PROFESSIOAL Supply voltage 230 Volts, compact and handy with sturdy metal gear housing, pre-set number of revolutions with setting wheel, mechanical anti-rotation and anti-overload-clutch. Auto-locking metal chuck with Auto-Lock for quick one-handed tool changes, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and improve operation, 43 mm collar Ø for use also on a column support P/ , /13 20/15 13/8 40/25 Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 336 x 214 h mm ITEM: GSB 21-2 RCT PROFESSIOAL Supply voltage 230 Volts, powerful and suitable for the most demanding applications, Constant Electronic for constant rpm even when under load, Torque Control for rotation power pre-selection, mechanical anti-rotation and anti-overload clutch. Auto-locking metal chuck with Auto-Lock for quick one-handed tool changes, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and improve operation, 43 mm collar Ø for use also on a column support P/ , /13 24/16 16/10 40/25 Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 355 x 220 h mm.28

29 ELECTRIC SDS PLUS REVERSIBLE ROTARY HAMMERS ITEM: GBH 2-28 DFV PROFESSIOAL Maximum drilling progress and chiselling performance in its class. Operation increased as much as 25% compared to other rotary hammers in its class, provides greater convenience. 27% vibration reduction compared to the previous model thanks to the active cushioning of vibrations. Replaceable chuck for quick passage from impact drilling in concrete to drilling without impact in wood and metal. Adjustable brush holder to guarantee the same power in right and left-hand rotation. Safety clutch for user and tool protection. Reversibility (right and-left hand rotation) for freeing blocked bits M/ , Case Auxiliary handle Depth stop 210 mm Chuck SDS Plus Auto-locking chuck 13 mm Dimensions: 402 x 216 h mm ITEM: GBH 2-20 D PROFESSIOAL Supply voltage 230 Volts, sturdy and compact with great versatility thanks to the chisel function, stepless adjustment of the number of revolutions for a more sensitive drilling start. Safety clutch against overload and for tool and user protection, impact stop for drilling steel and wood, Variolock for positioning the chisel at the desired location, comfortable handle with Softgrip coating M/ , Auxiliary handle Depth rod 210 mm Plastic case Dimensions: 325 x 212 h mm ELECTRIC SDS PLUS REVERSIBLE ROTARY HAMMERS ITEM: GBH 2-24 D PROFESSIOAL Supply voltage 230 Volts, compact and balanced thanks to its "L" shape, system for quick replacement of the SDS Plus coupling with auto-locking chuck. Stepless adjustment of the number of revolutions for a more sensitive drilling start, impact stop for drilling steel and wood and rotation stop for chiselling. Safety clutch against overload, Vibration Control for effective vibration reduction, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and impediments M/ ,00 Auto-locking chuck Quick-change 13mm Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 354 x 233 h mm.29

30 ELECTRIC SDS PLUS REVERSIBLE ROTARY HAMMERS ITEM: GBH 3-28 DFR PROFESSIOAL Supply voltage 230 Volts, compact and balanced thanks to its "L" shape, system for quick replacement of the SDS Plus coupling with auto-locking chuck. Stepless adjustment of the number of revolutions for a more sensitive drilling start, impact stop for drilling steel and wood and rotation stop for chiselling. Safety clutch against overload, Vibration Control for effective vibration reduction, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and impediments M/ , Auto-locking chuck Quick-change 13mm Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 354 x 233 h mm ITEM: GSH 3 E PROFESSIOAL ELECTRIC SDS PLUS DEMOLITIO HAMMERS Supply voltage 230 Volts, high removal capacity, electronic control for supplying adequate power. Extremely sturdy hammer mechanism with oil lubrication for long service life, starter switch with lock, handle with Softgrip coating for a secure and comfortable grip D/ , Flat chisel 40 x 260 mm Pointed chisel 250 mm Auxiliary handle Grease tube Plastic case Dimensions: 376 x 208 h mm ELECTRIC SDS MAX ROTARY HAMMERS ITEM: GBH 5-40 DCE PROFESSIOAL Supply voltage 230 Volts, powerful multi-purpose, variable adjustment of number of revolutions and strokes for optimum power, COSTAT ELECTROIC for constant rpm even under load. TURBO POWER with automatic insertion for increased power and high material removal, safety clutch against overload, VIBRATIO COTROL for effective vibration reduction. Start switch with lock for effortless chipping work, Vibration Control for effective vibration reduction, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and impediments M/ , Auxiliary handle Grease tube Cloth Plastic case Dimensions: 485 x 260 h mm.30

31 ITEM: GWS 750 PROFESSIOAL ELECTRIC AGLE GRIDERS Supply voltage 230 Volts, lightweight and easy to handle, chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, adjustable grinding wheel guard with axial safety lock and extra handle for both right and left-hand use. Equiped with the RESTART PROTECTIO, protection against the restarting in case of power interruption / , RIC 12,99 Protection cap Clamping nut Dual hole wrench Dimensions: 263 x 104 h mm ITEM: GWS PROFESSIOAL Supply voltage 230 Volts, powerful and easy to handle, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use. Equiped with the RESTART PROTECTIO, protection against the restarting in case of power interruption / , RIC1 18,48 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 284 x 102 h mm ITEM: GWS PROFESSIOAL Supply voltage 230 Volts, powerful and compact, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use. Plastic case. Equiped with the RESTART PROTECTIO, protection against the restarting in case of power interruption / , RIC1 18,48 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 336 x 102 h mm.31

32 ELECTRIC AGLE GRIDERS ITEM: GWS CI PROFESSIOAL Supply voltage 230 Volts, powerful, compact, technologically advanced, starting current limiter for a smooth and safe start and Constant Electronic for constant rpm even under load. Kick-Back-Stop for power turn-off in case of wheel lock, protection against accidental restarting, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use / , Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 297x103h mm KICK BACK STOP RIC2 20,91 ITEM: GWS 1400 PROFESSIOAL Supply voltage 230 Volts, powerful, compact, technologically advanced, starting current limiter for a smooth and safe start and Constant Electronic for constant rpm even under load. Kick-Back-Stop for power turn-off in case of wheel lock, protection against accidental restarting, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel / , M14 Protection cap Clamping nut handle Dual hole wrench Dimensions: 297x103h mm KICK BACK STOP RIC4 20,91 ITEM: GWS CI PROFESSIOAL Supply voltage 230 Volts, extra-powerful, compact, technologically advanced, starting current limiter for a smooth and safe start and Constant Electronic for constant rpm even under load. Kick-Back-Stop for power turn-off in case of wheel lock, protection against accidental restarting, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use / , Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 311x103h mm KICK BACK STOP RIC2 20,91.32

33 ITEM: GWS IOX AGLE GRIDERS smooth start and safe, preset speed of six positions. Constant Electronic for constant speed under load, Kick Back Stop to stop the power in case of blocking of the grinding wheel, protection against unexpected restart, direct cooling and dust protection for a high resistance, overload protection for a long lifespan. Large spindle lock button for easy replacement of the grinding wheel, safety switch against accidental switch, head gear rotated by 90, headphone wheel cover with quick positioning positioning, auxiliary handle Vibration Control applicable both right and left. Plastic casing / , M14 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 311x103 mm KICK BACK STOP RIC2 20,91 ITEM: GWS CIH PROFESSIOAL Good handling thanks to the ergonomic handle with Softgrip coating and to its low weight. Ideal for continuous use and overhead work. The most powerful 1500 W Champion motor with protection against accidental restarting. Kick-Back-Stop: detects a block and turns off the tool immediately. Anti-rotation protective guard - quickly and easily adjustable, provides reliable protection. Auxiliary Vibration Control handle with 40% vibration reduction for low-fatigue work (E 60745). Safety switch for immediate shut-off when the tool is released. Constant Electronic for constant rpm under load. Gear head rotatable in 90 steps. Handle for both left and right-hand use , M RIC3 16,56 Protection cap Clamping nut Vibration Control Handle Two-hole key Dimensions: 344 x 103 h mm KICK BACK STOP ITEM: GWS CIEH PROFESSIOAL Good handling thanks to the ergonomic handle with Softgrip coating and to its low weight. Ideal for continuous use and overhead work. The most powerful 1500 W Champion motor with protection against accidental restarting. Kick-Back-Stop: detects a block and turns off the tool immediately. Anti-rotation protective guard - quickly and easily adjustable, provides reliable protection. Auxiliary Vibration Control handle with 40% vibration reduction for low-fatigue work (E 60745). 6-stage revolution number pre-setting based on the different materials. Safety switch for immediate shut-off when the tool is released. Constant Electronic for constant rpm under load. Gear head rotatable in 90 steps. Handle for both left and right-hand use , M RIC3 16,56 Mounting capclamping nutvibration Control HandleTwo-hole key Dimensions: 344 x 103 h mm KICK BACK STOP.33

34 ELECTRIC AGLE GRIDERS ITEM: GWS CIH PROFESSIOAL Good handling thanks to the ergonomic handle with Softgrip coating and to its low weight. Ideal for continuous use and overhead work. The most powerful 1500 W Champion motor with protection against accidental restarting. For 150 mm discs - deeper cutting depth and greater material removal. Kick-Back-Stop: detects a block and turns off the tool immediately. Anti-rotation protective guard - quickly and easily adjustable, provides reliable protection. Auxiliary Vibration Control handle with 40% vibration reduction for low-fatigue work (E 60745). Safety switch for immediate shut-off when the tool is released. Constant Electronic for constant rpm under load. Gear head rotatable in 90 steps. Handle for both left and right-hand use , M RIC3 16,56 Clamping nut Two-hole key Protection cap Vibration Control Handle Case Dimensions: 382 x 102 h mm KICK BACK STOP ITEM: GWS JH PROFESSIOAL Supply voltage 230 Volts, powerful and low-weight, starting current limiter for a smooth and safe start, protection lock against accidental restarting. Chuck lock for easy wheel change, three-control safety switch, anti-rotating quick positioning guard for grinding wheel, auxiliary Vibration Control handle for both right and left-hand use / , RIC4 20,91 Protection cap Clamping nut Dual hole wrench Additional handle Dimensions: 515 x 140 h mm ITEM: GWS LVI PROFESSIOAL Supply voltage 230 Volts, powerful, easy to handle and technologically advanced, starting current limiter for a safe and smooth start. Kick-Back-Stop: turns off the machine immediately if there is a grinding wheel block. Chuck lock for easy wheel change, three-control safety switch, anti-rotating quick positioning guard for grinding wheel, primary Vibration Control handle and auxiliary Vibration Control handle for both right and left-hand use / , RIC4 20,91 Casing Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 500 x 130 h mm KICK BACK STOP DIAMOD CUTTIG DISCS Suitable for use on all ferrous construction materials. Do not use on stone and granite , ,50.34

35 ELECTRIC AXIAL GRIDERS ITEM: GGS 28 C PROFESSIOAL Supply voltage 230 Volts, compact, ergonomic and extremely easy to handle, Constant Electronic for constant rpm even under load, Kick-Back Stop device for immediate shut-down if the tool detects a block, ball bearing with double hermetic seal applied on rubber to minimise vibrations, brushes with automatic release for for stationary use /1A , mm collect chuck Dimensions: 291 x 75 h mm KICK BACK STOP ITEM: GGS 28 LC PROFESSIOAL Powerful 650-Watt motor with soft start for fast work progress. Long and slender sanding spindle - particularly suited for use in hard-to-reach areas. Kick-Back-Stop: immediate tool shut-down when a block of the grinding wheel is detected - for superior user protection. Constant Electronic System for constant rpm even under load. Compact and ergonomic shape for versatile sanding. Brush disengagement for high motor protection. Reduced maintenance thanks to an optimised useful life of the brushes , ITEM: GGS 28 LCE PROFESSIOAL Dimensions: 375 x 75 h mm Powerful 650-Watt motor with soft start for fast work progress. Long and slender sanding spindle - particularly suited for use in hard-to-reach areas. Kick-Back-Stop: immediate tool shut-down when a block of the grinding wheel is detected - for superior user protection. Constant Electronic System for constant rpm even under high load. Compact and ergonomic shape for versatile sanding. Brush disengagement for high motor protection. Reduced maintenance thanks to an optimised useful life of the brushes , Equipment Dimensions: 375 x 75 h mm KICK BACK STOP KICK BACK STOP ITEM: GGS 8 CE PROFESSIOAL Supply voltage 230 Volts, strong and very resistant, suitable for more challenging milling and grinding work, rpm under load. Robust gear housing, protection switch against accidental starting, optimally positioned air intakes for high resistance to overloads and long service life , mm collect chuck Dimensions: 332 x 82 h mm KICK BACK STOP.35

36 ELECTRIC ORBITAL SADERS ITEM: GSS 140 A PROFESSIOAL positions and Softgrip coating for maximum working comfort / , Plate punching 2 paper sandpaper sheets Plastic case Dimensions: 249 x 147 h mm EASY FIT ITEM: GSS 23 AE PROFESSIOAL Supply voltage 230 Volts, lightweight and manoeuvrable with electronic revolution and oscillation adjustment to work each type of material in the most appropriate way, Easy-Fit system with automatic tensioning for a gripping positions and Softgrip coating for maximum working comfort / , Plate punching 2 paper sandpaper sheets Plastic case Dimensions: 317 x 158 h mm EASY FIT ITEM: GSS 280 AE Supply voltage 230 Volts, lightweight and manoeuvrable with electronic revolution and oscillation adjustment to work each type of material in the most appropriate way, sanding pad for innovative and outstanding durability and for optimal surface quality. Sandpaper roll or Velcro connector for perfect suction, handle with palm position and removable front handle for wire sanding without obstacles / , mm L wrench key 2 sandpaper sheets Dimensions: 350 x 195 h mm ELECTRIC ROTO-ORBITAL SADERS ITEM: GEX 150 AC PROFESSIOAL Supply voltage 230 Volts, high removal model with revolution and oscillation adjustment and pre-setting for appropriate work in all types of applications. Constant Electronic for constant rpm even under load, pad brake sanding without obstacles / , mm hexagonal L wrench 120 grain abrasive disc Dimensions: 315 x 190 h mm.36

37 ELECTRIC ROTO-ORBITAL SADERS ITEM: GEX 150 TURBO PROFESSIOAL to raw sanding or to polishing. Constant Electronic for constant rpm even under load providing powerful turbo integrated suction duct for direct connection to the aspirator / , mm hexagonal L wrench 120 grain abrasive disc Plastic case Dimensions: 310 x 147 h mm ELECTRIC BELT SADERS ITEM: GBS 75 AE PROFESSIOAL Supply voltage 230 Volts, sturdy and extremely easy to handle with pre-selection of the number of revolutions for work suited to the material, sturdy toothed belt and related toothed metal wheels for long service life. Sanding pad with graphite coating, aluminium rollers, micro-adjustment of the guide roller for proper belt running and fast/stable tensioning lever for simple belt change. Direct suction connection to the aspirator or to the dust bag, removable front handle for wire sanding without obstacles / ,00 Abrasive belt Dust bag Dimensions: 440 x 130 h mm.37

38 ELECTRIC JIG SAWS ITEM: GST 90 BE PROFESSIOAL Supply voltage 230 Volts, standard model with high comfort, switch with acceleration function for soft-start cutting with all materials. SDS system for tool-free blade change, four-position adjustable blade oscillation, integrated suction duct for direct connection to the aspirator, sawdust blower device that can be switched off, handle with Softgrip-coated grip points for maximum working comfort / , Blade 5 mm hexagonal L wrench Plastic case Dimensions: 393 x 330 h mm ITEM: GST 160 BCE Thanks to its double roller, the extremely precise guide prevents the blade from bending, providing excellent cutting precision. Compact and light structure, reduced handle size, for a maximised cutting control. Its blade replacement system (SDS), which does not require any tools while ensuring no gap, prevents blade vibration therefore also ensuring superior surface quality. A mass compensation system designed to attenuate vibrations, providing excellent rotational uniformity. High-performance LED ensures intense lighting of the cutting area. A powerful 800 watt motor complete with Constant Electronic system, represents a great power source for deep cutting also in case of hard materials Accuracy with a systematic approach: compatible with the new guide rail and with our Extra Clean for Wood blades for splinter-free cutting. Compatible with all Bosch dust aspirator for clean work operations. Sturdy magnesium crankcase and tool-free adjustment / , T 144 DP blade 1 T 244 D blade 2 T 308 B blades 1/1 insert for casing L-BOXX for tool Suction adapter Splinter protection L-BOXX 136 casing Dimensions 251x183h mm ITEM: GST 160 CE Thanks to its patented double roller, the extremely precise guide prevents the blade from bending, providing excellent cutting precision. Its blade replacement system (SDS), which does not require any tools while ensuring no gap, prevents blade vibration therefore also ensuring superior surface quality. A mass compensation system designed to attenuate vibrations, providing excellent rotational uniformity. High-performance LED ensures intense lighting of the cutting area. A powerful 800 watt motor complete with Constant Electronic system, represents a great power source for deep cutting also in case of hard materials Sturdy magnesium crankcase and tool-free adjustment , T 144 DP blade 1 T 244 D blade 2 T 308 B blades 1/1 insert for casing L-BOXX for tool Suction adapter Splinter protection L-BOXX 136 casing Dimensions 251x183h mm.38

39 ELECTRIC CIRCULAR SAW BLADES ITEM: GKS 65 GCE PROFESSIOAL Precise interaction with the new Bosch FS guide system and with guide rails of other suppliers. Execution of angled cuts with the guide without any adapter. High cutting progress thanks to the powerful 1,800-Watt motor and the Constant Electronic system. Base in cast aluminium with a precisely milled groove for the guides , Suction adapter MD blade 190 mm Ø L-BOXX 5 mm hexagon L wrench Dimensions: 320 x 270 h mm ELECTRIC CIRCULAR BLADES WITH TEETH FOR WOOD HM OPTILIE Special steel body with expansion groove to prevent deformation, suitable for fast and accurate cutting of soft and hard wood, pressed and plywood, laminboard and chipboard , B1: Cutting width B2: Blade body thickness ELECTRIC SHEARS ITEM: GSC 160 PROFESSIOAL Supply voltage 230 Volts, short, easy to handle, with an excellent view of the cutting line, tight curving radius, protected safety slide switch / , LR/1 30,50 Upper/lower blade 3 mm hexagon L wrench Dimensions: 232 x 115 h mm ITEM: GSC 2.8 PROFESSIOAL Supply voltage 230 Volts, slim body, slender shape for optimum manoeuvrability, adjustable blades with cutting edges on both sides, tight curving radius and good view of the cutting line. Protected safety slide switch, additional knob handle for optimum stability during cutting / , LR/2 56,00 Template adjustment Pair of blades 2.5 mm allen key 5 mm hexagon L wrench Dimensions: 292 x 205 h mm.39

40 ELECTRIC IBBLERS ITEM: GA 2.0 PROFESSIOAL Supply voltage 230 Volts, slim and compact body with high manoeuvrability, adjustable matrix for better access to corners with locking option for straight cuts. Protected safety slide switch. Work without problems thanks to track templates and cuts from solid / , ELECTRIC HEAT GUS ITEM: GHG 600 CE PROFESSIOAL Punch for curve cut Matrix 2.5 mm allen key Dimensions: 275 x 127 h mm Supply voltage 230 V, universal model suitable for heating, removing paint and welding operations for coating / , Dimensions: 340 x 105 h mm ITEM: GHG 660 LCD PROFESSIOAL temperature and air adjustment in ten positions via the LCD display. Memorisation of the four main applications for proper adjustment of both the air and temperature, automatic shut-down in case of longer overheating time, / , mm protective nozzle Plastic case Dimensions: 255 x 255 h mm ITEM: HG 5012 K ELECTRIC HEAT GUS removal of varnish, welding and hardening applications / ,00 Plastic casing Dimensions: 240x80x200h mm.40

41 ITEM: T 111 C JIG SAW BLADES FOR WOOD , ITEM: T 144 D , ITEM: T 244 D , ITEM: T 344 D , ITEM: T 101 B , ITEM: T 101 D , ITEM: T 301 CD , ITEM: T 345 XF JIG SAW BLADES FOR WOOD WITH METAL including aluminum (3-10 mm) , ITEM: T 118 AF JIG SAW BLADES FOR METAL Two-metal, wavy corrugated, milled, thin sheet metal (1-3 mm) , ITEM: T 118 BF Two-metal, wavy corrugated, milled, medium-thick sheet metal (1-3 mm) , ITEM: T 118 G HCS, wavy corrugated, milled, very thin sheet metal ( mm) ,

42 ITEM: T 118 A JIG SAW BLADES FOR METAL HSS, wavy corrugated, milled, thin sheet metal (1-3 mm) , ITEM: T 218 A HSS, wavy corrugated, milled, thin sheet metal (1-3 mm). Ideal for cutting curved , ITEM: T 318 A , ITEM: T 118 B HSS, wavy corrugated, milled, medium-thick sheet metal (2.5-6 mm) , ITEM: T 318 B JIG SAW BLADES FOR ALUMIIUM AD O-FERROUS METALS mm). Angle and precise cuts , ITEM: T 127 D , ITEM: T 227 D , ITEM: T 118 AHM JIG SAW BLADES FOR STAILESS STEEL , ITEM: T 118 EHM , ITEM: T 102 BF JIG SAW BLADES FOR ACRYLIC MATERIAL ,

43 JIG SAW BLADES FOR FIBRE/CEMET MATERIALS ITEM: T 141 HM , ITEM: T 341 HM , JIG SAW BLADES FOR CERAMIC MATERIALS ITEM: T 130 RIFF , ITEM: S 2345 X BLADES FOR UIVERSAL SAWS - BLADES FOR WOOD mm), wooden walls (< 150 mm). Fine cut and effortlessly A 18, ITEM: S 1111 K B 13, ITEM: S 922 HF BLADES FOR UIVERSAL SAWS - BLADES FOR WOOD WITH AILS/METAL (3-12 mm) C 28, ITEM: S 3456 XF D 40, ITEM: S 922 EF UIVERSAL SAW BLADES FOR METAL G 28, ITEM: S 922 BF F 28,

44 BLADES FOR UIVERSAL SAWS - BLADES FOR METAL ITEM: S 1122 EF E 30, ITEM: S 1122 BF H 30, JIG SAWS BLADES ICOS LEGED.44

45 KEYLESS DRILL CHUCKS ITEM: SUPRA Reliable clamping force even under the most severe operating conditions. S-version recommended for portable drills. * B18 cone shortened by 7 mm , ,75 10 B , , B , ,85 B18* ITEM: SUPRA SK Safety clamping device for maximum reliability even with strong vibrations and reverse rotation, protection against dust and side drain holes with ejecting centrifuge in case of dust intrusion ,70 ITEM: SPIRO-SK Accurate execution, chamfered cap and 0.05 mm concentricity. Recommended for high-speed drills, boring machines and special drilling units , B , ITEM: EXTRA RV Metal cap, ergonomic shape and high concentricity, radial locking and hexagon for assembly and disassembly. Suitable for all types of drills up to 1100 Watts. GR13 carbide jaws. a * - without retaining ring * - with retaining ring , , ,

46 TAPER COUPLIGS FOR DRILL SPIDLES ITEM: 236 Taper shank with tang DI 228 B. Completely hardened and ground. 01 L A C E G H 5210CM1B10 6, B CM1B12 6, B CM1B16 6, B CM1B18 6, B CM2B10 6, B CM2B12 6, B CM2B16 6, B CM2B18 6, B CM2B22 6, B CM3B12 8, B CM3B16 8, B CM3B18 8, B CM3B22 8,40 B CM3B24 8, B CM4B16 17, B CM4B18 20, B CM4B22 17,80 B CM5B16 34, B CM5B18 34,65 32 B18 REDUCTIO SLEEVES FOR DRILLS WITH MORSE TAPER 218 ITEM: 262 Accurate execution DI Fully hardened and ground internally and externally. 01 L 5211CM2/1 9, CM3/2 12, CM4/3 16, CM5/4 33,00 EXTRACTORS/PULLIERS FOR MORSE COES ITEM: 5215 Vanadium chrome zinc chromed steel , , , , SEMI AUTOMATIC DRILL DRIFTS Special hardened burnished steel, thermoplastic handle ,

47 ITEM: 5220 METRIC THREADIG SET M3-M12-22 PCS Supplied in its sturdy rigid plastic box Composition: - 21 Pces taps M3-M4-M5-M6-M8-M10-M12 3 pieces each - 1 Pc Tap wrenches M3M12 138,00 ITEM: 5221 METRIC THREADIG SET M3-M12-16 PZ Provided in foam covered comfortable tray contained in rigid plastic box. Composition: - 7 pces taps M3-M4-M5-M6-M8-M10-M12-1 adjustable tap wrench gr. 1, 1/2 - dies. 7pcs d.25 mm M3-M4-M5-M6-M8-M10-M12-1 die wrench 25 x 9mm M3M12 146,00 ITEM: 5223 METRIC THREADIG SET M3-M12-43 PZ Supplied in its sturdy rigid plastic box Composition: - 21 Pces taps M3-M4-M5-M6-M8-M10-M12 3 each - Dies 7 pcs M3-M4-M5-M6-M8-M10-M12 - Drills 7 pcs DI 338 (2,5-10,2) - Die holder 5 pcs - Tap wrenches 2 pcs - Screw pitch gauge caliper 1 pcs SET43 289,00 COICAL STEP DRILLS ITEM: 5230 HSS steel, suitable for ferrous and non-ferrous metal and plastic ,00 29,00 48,00 78,00 38,00 66, COICAL STEP DRILL BIT SET ITEM: 5231 step drill bit set in rigid plastic box. 5231SET3/ ,

48 COICAL DRILLS FOR SHEET METAL ITEM: 1700 HSS-E steel, suitable for ferrous and non-ferrous metal and plastic , ,00 34,00 65,00 132,00 198,00 242, COICAL DRILL BIT SET FOR SHEET METAL ITEM: 1720 Conical drill bit set in metal case. 5234SET3/ ,00 3 JOBBER DRILLS FOR SMALL PRODUCTIO SERIES Geometry Point angle 118 Surface treatment Vaporized Application General application Roll forged execution TIP DI L , ,5 0, , ,5 1, , ,5 1, , ,5 1, , ,5 2, , ,5 2, , Sold as Indivisible packaged items L ,5 3, , ,5 4, , ,5 5, , ,5 8, , , , , , ,

49 STUB DRILLS FOR SMALL PRODUCTIO SERIES Geometry Standard helix, right hand cutting Point angle 118 Surface treatment Vaporized Application General use Ground execution TIP DI L , ,1 1, ,2 1, ,25 1, ,3 1, ,4 1, ,5 1, ,6 1, ,7 1, ,75 1, ,8 1, , ,1 1, Sold as Indivisible packaged items L ,2 1, ,5 1, ,8 1, ,9 2, , ,1 2, ,2 2, ,3 2, ,5 2, ,6 2, ,7 2, ,8 2, , JOBBER DRILL KIT Geometry Right hand /R type normal helix Point angle 118 Surface treatment Steam tempering Application General application Roll forget SET19 30, SET25 49,00 25 STRAIGHT FLUTE TAPS FOR THROUGH HOLES ISO coarse thread DI 13 Tolerance 6H ISO 2 Surface treatment Bright < 2XD Hole type Through Application General use on low-alloyed steel TAP DI 371 TAP DI L 5250M3 10, M4 10, M5 10, M6 10, MALE DI L M8 12, M10 14, M12 20,

50 SPIRAL FLUTE TAPS FOR BLID HOLES ISO Threading coarse pitch thread DI 13 Tolerance 6H ISO 2 Surface treatment Bright < 2,5XD Hole type Blind Application Generic use on low-alloyed steel TAP DI 371 TAP DI 376 MALE DI L 5252M3 11, M4 11, M5 11, M6 11, L M8 13, M10 15, M12 20, THERMAL FRICTIO DRILLS ITEM: 5260 The DRABUS frictiondrilling process creates the possibility of making holes in thin metal sheets and thin-walled tubes in just a few seconds without chips, while forming a bushing at the same time. This bushing can be used as a soldering or welding connection or as a bearing bushing. By tapping a screw-thread it can also be used as screw connection. The DRABUS frictiondrilling process replaces and eliminates the use of rivet or welding nuts as well as steel insert bushings. It accordingly saves time, work and material. 01 D1 L1 D , , , , , , BI-METAL HOLE SAWS ITEM: 5270 Bi-metal saw ring with HSS M42 (8% Co) cutting edge, sturdy steel body construction, medium hardness 63 HRC, suitable for steel, stainless steel, aluminium, copper, bronze, etc., max. cutting depth 35 mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

51 BI-METAL HOLE SAWS - SHARK ITEM: 5272 Cutting edge made of Bi-metal HSS 8% Cobalt (M42). Progressive variable toothing 4/6 suitable for Steel, Stailess Steel, Aluminium, Copper, Bronze, etc. Maximum cutting depth 48mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , COUPLIG FOR BI-METAL HOLE SAWS ITEM: 5273 Complete with pilot drill bit adjustable through the screw on the side of the chuck , , , , ,50 DRILL BITS FOR BI-METAL HOLE SAWS ,80 8,80.51

52 BI-METAL HOLE SAWS I CASE Kit designed for precision drilling tasks with thickness up to mm Recommended for steel, cast iron, aluminum, copper, wood and plastic cutting works SET6 140,00 ITEM: 5277 kit 9 pcs bi-metal hole saws high speed with progessive variable toothing 4/6, including two attacks and a reduction SET9 127,00 HSS STEEL HOLE CUTTERS WITH CHIP BREAKER ITEM: 5280 Complete with shank drill bit and extraction spring, suitable for steel, stainless steel, cast iron, aluminium, etc., max. cutting depth 5 mm , , , , , , , , , , , , , , , , , , , , , , D , , , , , , , , , , , , , , , , , , , , , ,92 6 D

53 HOLE CUTTERS WITH CARBIDE TIPS ITEM: 5285 Tungsten carbide tipped hole saws, interchangeable drill bit with spring extraction, suitable for stainless steel, aluminium , , , , , , , , , , , , ,60 28 D D , , , , , , , , , , , , ,

54 SCREW EXTRACTORS KIT ITEM: 5290 The tool body is made of tool steel of the highest quality and subjected to various heat treatments to reach a hardness of 64 Rockwell. In this way the tool has the ability to pierce screws whit quality 8.8 or stainless steel. The unique feature is the left hand cutting edge. The reversible power drill must in fact be operated for the entire operation in a counterclockwise direction. designed for drilling rough surfaces. The drilling depth needed for the extraction is very low, this means a drilling time shorter and less odds that the operator drills offset and going to damage the thread. On the release ring are made of seven helical grooves. These optimally distribute the tensions in the hole without causing the expansion of the broken screw, main reason of failures that occur using standard extractors. 5290M3M ,70 ITEM: 5291 The tool body is made of tool steel of the highest quality and subjected to various heat treatments to reach a hardness of 64 Rockwell. In this way the tool has the ability to pierce screws whit quality 8.8 or stainless steel. The unique feature is the left hand cutting edge. The reversible power drill must in fact be operated for the entire operation in a counterclockwise direction. designed for drilling rough surfaces. The drilling depth needed for the extraction is very low, this means a drilling time shorter and less odds that the operator drills offset and going to damage the thread. On the release ring are made of seven helical grooves. These optimally distribute the tensions in the hole without causing the expansion of the broken screw, main reason of failures that occur using standard extractors. 5291M6M ,80 TAP EXTRACTORS FOR BROKE TAPS ITEM: 5293 Remove broken taps and save the threads. Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Model with 3 beam to put into the groove of a broken taps. 01 MA ,70 M3 # ,70 M4 # ,70 M5 # ,00 M , , ,80 M12 Available on request others dimensions. ITEM: 5294 Remove broken taps and save the threads. Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Model with 4 beam to put into the groove of a broken taps. 01 MA ,70 M4 # ,70 M5 # ,00 M , , ,80 M12 Available on request others dimensions..54

55 TWIST DRILLS FOR MASORY/COCRETE ITEM: SILVER PERCUSSIO Head with special geometry for high feed, wide HM cutting edge discharged at the bottom to avoid drill bit breakage and hard steel body with U spiral groove. Suitable for drilling masonry, concrete, natural and 01 D L1 L X70 2, X75 2, X85 2, X100 3, X120 3, X200 7, X400 10, X120 5, X200 8, X400 13, X150 7, X200 10, X400 12, X150 9, X400 15, X160 12, X400 18, Drill bit set in plastic case DRILL BIT SET FOR MASORY/COCRETE 5302SET5/1 5302SET7/ ,40 18,

56 SDS PLUS DRILL BITS FOR MASORY/COCRETE WITH FOUR SPIRALS Head with HM cutting edges and geometry optimised for maximum energy transfer for fast drilling, innovative quadruple spiral for rapid removal of drilling dust and vibration reduction and for increased bit 01 D L1 L X110 5, X110 4, X160 4, X110 4, X160 4, X210 7, X110 5, X160 5, X210 6, X260 8, X460 18, X160 6, X210 7, X260 9, X460 15, X160 7, X210 8, X260 10, X460 18, X160 10, X210 12, X260 13, X460 23, X210 15, X310 18, X450 30, X300 33, X450 34, X300 37, X450 39, X450 62, X450 73,00 25 Drill bit set in plastic case DRILL BITS FOR MASORY/COCRETE WITH FOUR SPIRAL SDS PLUS 5306SET5/ ,

57 Coupling SDS Plus SDS - PLUS POITED CHISELS FOR ROTARY AD DEMOLITIO HAMMERS , Coupling SDS Plus SDS - PLUS FLAT CHISELS FOR ROTARY AD DEMOLITIO HAMMERS , Coupling SDS Max SDS - MAX POITED CHISELS FOR ROTARY AD DEMOLITIO HAMMERS , Coupling SDS Max SDS - MAX FLAT CHISELS FOR ROTARY AD DEMOLITIO HAMMERS , MIXERS FOR LIQUIDS ITEM: 5360 Used for paints, varnishes, primers, plasters light ,

58 TWISTOIL IDUSTRIAL ASPIRATORS/SEPARATORS ITEM: 4500 Supply voltage 220/240 Volts, system designed to suck up them back into the machine tool. Drastically reduces replacement costs for oils and coolants, improving safety and the work environment as well. Trolley transport system with oil-resistant wheels, braking wheel and space for accessories. Elastomer compound conical lance with connection Tank capacity l 130 Solid material container l 37 Power (single-phase) kw/hp 2.4 / 3 Max. depression mm/h2o 2200 Air capacity l/min oise level db(a) 76 Suction mouth mm 50 1" Weight kg , , , , , , , , , , , , ,00.58

59 MII STORM UIVERSAL ASPIRATORS ITEM: 6010 Mini storm is an industrial-use, single-phase aspirator for solid materials. Powerful and reliable vacuum tool, ideal for non-continuous works. Equipped with By-pass motors, separate buttons, hand vertical dust collector shaker. Among the most compact in its category. Mini Storm, great performance and dramatically reduced storage space. - Adapter 70 / 50 mm lance L 350 mm - Antistatic rubber sleeve/nozzle Voltage Volt/Hz 230 / power (mono-phase) kw/hp Max. depression mm/h2o 2160 Air capacity m³/h 340 Filtering surface cm² Protection class IP 44 oise 70 Container 45 Suction inlet mm 70 Dimensions mm 510x520x1240 h Weight Kg , , , , , , , , , , ,00 Alarm device when tank il full - It permits automatic aspiration interruption when the tank is full. Composed of: - container wet and dry KITTP ,00.59

60 IDUSTRIAL ASPIRATORS VACUUM CLEAERS STORM 3600 ITEM: STORM 3600 Supply voltage 220/240 Volts, three independent bypass Cyclone and tangential air inlet with release, quick accessory attachment device. Trolley transport system with braking wheel and convenient storage area for accessories and other related products. Removable container for suctioned materials. 80/50 mm reduction Elastomer compound conical lance with connection Curved extension connection Tank capacity l 100 Power (single-phase) kw/hp Max. depression mm/h2o 2160 Air capacity l/min. 492 oise level db(a) 76 Suction mouth mm 80 Dimensions mm 800x650x1640 Weight kg , , , , , , , , , , , , , ,00 Composed by: - Elastomeric conical lance 6016KITFU ,00 Composed by: - Float valve for liquids - Spherical valve 3/4" (to facilitate emptying). 6017KITP ,00.60

61 VACUUM CLEAERS FOR DUST AD LIQUID ITEM: ASL 10 P Supply voltage 220/240 Volts, plastic tank, light-weight with homes, easily transported in vehicles. Brush Flat lance Rigid pipe 0.5 m (2 pcs.) Floor nozzle for dust Floor nozzle for liquids ,00 Tank/useful capacity l 22-6 Rated power Watt 1000 Air capacity l/sec. 53 oise level db(a) Dimensions mm 410x410x560 Weight kg 9.2 ITEM: AS 27 I Supply voltage 220/240 Volts, stainless steel tank, transported in vehicles. Flat lance S rigid pipe (2 pcs.) Floor nozzle for dust Floor nozzle for liquids ,00 Tank/useful capacity l Rated power Watt 1000 Air capacity l/sec. 53 oise level db(a) Dimensions mm 410x410x760 Weight kg 10 ITEM: AS 400 IK Right balance between power, suction capacity and overall dimensions. Suitable for use in industry, crafts and commerce. Supply voltage 220/240 Volts, stainless steel tank and anti-static kit. 2.5 m Brush Flat lance S rigid pipe Floor nozzle for dust Floor nozzle for liquids ,00 Tank/useful capacity l Rated power Watt 1200 Air capacity l/sec. 58 oise level db(a) Dimensions mm 500x500x840 Weight kg 14 ITEM: AS 60 IK Tank/useful capacity l Powerful, with great suction capacity, suitable for industry Rated power Watt 2900 and crafts where challenging performance is required. Air capacity l/sec. 150 Supply voltage 220/240 Volts, stainless steel tank and antistatic oise level db(a) 66.5 kit. 50 Accessories included: Ref. bristle adjustable brush 40 cm Dimensions mm 610x520x920 Weight kg 25.2 Brush Flat lance S rigid pipe Adjustable liquid brush 40 cm ,00.61

62 SPARE PARTS FOR DUST/LIQUID VACUUM CLEAERS TF2,2 32, TF2,5 28, TF3 52, LP36 3, LP40 5, LP50 7,42 ITAKE WELDIG FUMES ASPIRATOR ITEM: 6050 The model ITAKE is the perfect solution for the welders' needs who normally have a limited space and do not want to lose time to move a suction arm. ITAKE is among the most compact in its class, powerful, The standard version consist of 3 mq cellulose cartridges and a single-phase motor 1000 W. Supplied with: - Cellulose cartridge Tension Volt 230 Power Watt 1000 Depression mbar 250 Air capacity m³/h 180 Filter media Cellulose Filter surface cm² 3000 Motors 1 Sound level db(a) 72 Suction mouth mm 36 Weight Kg ASP 1.198, , , ,00.62

63 CLEA GO WELDIG FUMES ASPIRATORS ITEM: 4600 Designed according to modern technological criteria, designed for industrial and crafts sectors that need easily transportable handling and strength. Machine maintenance is limited to replacing suction capacity ensures good extraction of noxious welding fumes without inhaling gases or cooling the welds, creating dangerous contractions of metals. CLEA GO was designed and built in full compliance with the law proposed by the American Conference of Governmental Industrial Hygienists, which set limits for the TLV values and for the maximum acceptable M.A.C. concentration of various pollutants (for welding fumes = 5 mg/mc). The extraction of toxic fumes from the workplace during winter creates a strong temperature drop in the room. CLEA GO is the solution to the into the room (where allowed by regulations ). OPERATIG PRICIPLE The polluted air is sucked in through the fully articulated and extendable patented arm with 360 rotation and introduced into the decantation chamber in which the heavier particles precipitate. At the same time, the smaller grain-size particles suspended in the air are captured and retained by highly into the work environment. - 2 activated carbon panels 6055ASP ,00 FILTERIG GROUPS FOR FUMES ASPIRATORS ITEM: 4610 structure equipped on the top with a plate holding the connections for the suction piping or for inserting a selfsupporting arm. The hopper and the two pull-out dust collection drawers are located at the bottom. The group is also equipped with: Electric fan with the appropriate power for the size of the group; Soundproof plenum to cover the electric fan and expulsion noise; Hour counter; Swivel wheels for easy moving and handling. The group consists of a pre-chamber where the greater part of the dust is separated and deposited in the the residual dust. The high-performance fan located at the top of the unit provides high suction capacity and low noise levels. HORIZOTAL CARTRIDGES. The horizontal arrangement of the cartridges allows easy - Hopper and dust collection drawer with wheels - Self-supporting arm 150 Ø L = 3000 mm - O/OFF switch Hour counter 6057ASP ,

64 HYDRAULIC PRESSES High performance, sturdy hydraulic press Entirely cut by laser, provides high precision during execution. A two-speed pump, one for rapid approach at low pressure, one for high pressure. The cylinder includes spring return and a manometer mounted off-therack , , , ,

65 MOTORIZED HYDRAULIC PRESSES High performance, sturdy motorized hydraulic presses. Entirely cut by laser, provides high precision during execution. A twospeed pump, one for rapid approach at low pressure, one for high pressure. the cylinder includes spring return and a manometer mounted off-the-rack , ,4 0, , ,7 0, , ,4 0, , ,6 0,3 HAD SHEARS FOR SHEET METAL CUTTIG ITEM: F7015 Pivots and spring in tempered steel Anti-fall rebound spring lever. Lateral lock plate with adjustment threaded screw ,00 212,00 346,00 489,

66 PARALLEL BECH VICES ITEM: 7020 Cast iron. Rear sliding jaw. Oversize screw with covered/sleeved threading. Exchangeable knurled, tempered jaws ,00 100,00 126,00 181, , PARALLEL BECH VICES ITEM: 7022 Forged steel Adjustable, prismatic double guide Exchangeable tempered jaws ,00 171,00 225, ,5 18,5 PARALLEL BECH VICES ITEM: 7025 Forged steel, Sliding rear jaw Exchangeable tempered jaws ,00 164,00 284,

67 PARALLEL BECH VICES Special cast iron body, knurled steel jaws, hardened and ground ,00 109,00 136,00 200, Cast steel body, replaceable steel knurled jaws, hardened and ground ,00 278,00 425, Forged steel body, replaceable steel knurled jaws, hardened and ground ,00 177,00 301, ,00 192, DRILL VICES Special cast iron body, prismatic replaceable steel jaws, hardened and ground ,00 126,00 165,00 218,

68 DRILL VICES - DOUBLE GUIDE Special cast iron body, prismatic replaceable steel jaws, hardened and ground ,00 208, ,5 11 MAGETIC JAWS I PAIRS FOR VICES ,00 35,00 41, Fibre-coated aluminium ,00 39,00 46, ,00 39,00 44, JACK PIPE BEDIG MACHIE ITEM: ATLAS The article is equipped with 5 formers for pipes of 1/4" - 3/8" - 1/2" - 3/4" - 1" and with a sturdy jack. It coldbends gas and water pipes, without welding. UI E10255 (BS UI3824) ,00 PORTABLE TRESTLES FOR HYDRAULIC MAITEACE ITEM: 7052 Professional version with tilting clamp in forged steel, milled and tempered jaws ,00 2" 20, ,00 3" 24, ,00 4" 40.68

69 ELECTRIC MARKIG PES Supply voltage 220 Volts / 50Hz, painted sheet steel body, suitable for engraving all metal electricity conductors, ideal for writing on and marking machine parts. 7060PE 7060CR 7060PR ,00 68,00 15,40 7 VIBRATIG ELECTRIC MARKIG PES Supply voltage 220 Volts, impact-proof with vibration frequency controller, plastic body. Suitable for engraving all ferrous and non-ferrous materials, glass, ceramic, stone, plastic and wood. Ideal for writing on and marking parts already in place PR 02 72,80 12, BECH DEMAGETISERS Supply voltage 220 Volts / 50Hz, painted sheet steel body, suitable for de-magnetising mechanical parts in contact with magnetic surfaces that have retained residual magnetism ,00 345, PORTABLE DEMAGETISERS Supply voltage 220 Volts / 50Hz, suitable for de-magnetising mechanical parts in contact with magnetic surfaces that have retained residual magnetism. Ideal for pieces of considerable size and , Suitable for magnetising/demagnetising screwdrivers and small clamping wrenches ,00.69

70 PORTABLE LAMPS ITEM: 306 E E E Supply voltage 230 Volts, oil, acid and solvent resistant ergonomic plastic grip ,00 20 ITEM: 329 E E E Supply voltage 230 Volts, electronic power circuit built into the handle, oil, acid and solvent resistant ergonomic soft two-component grip, replaceable impact-proof protection bell, adjustable and folding retractable hook, switch in recessed protected compartment, 30-LED lamp with ultra-white light and no heat generation, with low power consumption, long lasting (included), supplied with 10 m cable with plug ,00 55 ITEM: KL 230 cable with plug ,00 55 C-CLAMP MODEL BALLAST LAMPS , * on request available also in black or white. LAMP STADS Suitable for pantograph lamps 7086FP 7086FB 02 14,00 14,00.70

71 C-CLAMP MODEL BALLAST LAMPS WITH MAGIFYIG GLASS E E SB , BA , FLUORESCET LAMP WITH SWIG ARM ITEM: ,00 1,5 20 LAMPS WITH 12 V TRASFORMER E E Complies with the 626 Standard, supply voltage 230 V, toroidal transformer with thermal protection built into the and refrigerant emulsions with light source protection in tempered Pyrex glass, cable placed into the structure, ,

72 LAMPS WITH 12 V TRASFORMER E E coupling (included), black , TECHICAL LAMPS 24 V E E source protection in tempered Pyrex glass, cable placed into the structure, compensated joints with , P Technical features similar to This model is particularly suited for installation in machine rooms (CC lathes and machining centres) , CABLE REELS ITEM: 7100 brake and cable reel knob, safety thermal cut-out. SUPPLY VOLTAGE 230 V A 143, B 146, C 150,00 SUPPLY VOLTAGE 230 V D 233,

73 ITEM: 7103 safety thermal cut-out. SUPPLY VOLTAGE 380 V CABLE REELS , CABLE REELS WITH LAMP ITEM: 7110 E E E E , complies with 626 Standard. Supply voltage 230 Volts, impactresistant plastic body, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals, included) ,00 1 CABLE REELS WITH LAMP AD V TRASFORMER ITEM: 7111 E E E E , complies with 626 Standard. Supply voltage 230 Volts, safety transformer with manually resettable cut-out against short circuits and overloads, impact-resistant plastic body, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals, high-resistance cable ,

74 CABLE REELS WITH LAMP AD V TRASFORMER ITEM: 7112 E E E E , complies with 626 Standard. Supply voltage 230 Volts, safety transformer with manually resettable cut-out against short circuits and overloads, impact-resistant plastic body, cable roll guide Inlet, cable rack stopping device that can be inserted at 50-cm intervals, high-resistance cable ,00 1 IDUSTRIAL CABLE REELS WITH SPRIG ITEM: 7115 E E , complies with 626 Standard. Supply voltage 230 Volts, impact-resistant plastic body, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals and easily removed when constant cable traction is needed, thermal cut-out, double ground contact, high-resistance cable recoil spring, 71154M 71155M ,00 191, ITEM: 4315/GS E E , complies with 626 Standard. Supply voltage 230 Volts, plastic external structure, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals, thermal cut-out, double ground 71167M ,

75 COMPRESSED AIR HOSE REELS ITEM: 7120 E E Standards, complies with 626 Standard. Also suitable for cold water, maximum pressure 15 bars, impact-resistant plastic body, automatic hose-stopping device at the desired length, easily removable if , COMPRESSED AIR HOSE REELS ITEM: 7121 E E Standards, complies with 626 Standard. Also suitable for cold water, maximum pressure 15 bars, impact-resistant plastic body, automatic hose-stopping device at the desired length, easily removable if ,00 236, COMPRESSED AIR HOSE REELS ITEM: 7123 E E Standards, complies with 626 Standard. Also suitable for cold water, maximum pressure 12 bars, impact-resistant plastic body, automatic hose-stopping device at the desired length, easily removable if 71235, ,

76 VIBRATIO-COTROL RUBBER MOUTS WITH 2 THREADED PIS ITEM: 8010 wide application for industrial use, for elastic suspensions and for absorbing machines and mechanical structures vibrations. Those vibration-control mounts are composed by molded rubber inside two M/M version with double threaded pin 01 D M4 1,72 M M5 1,85 M M6 2, M6 2,28 20 M M8 2,05 25 M M6 2,18 30 M M8 2, M8 2, M8 3, M8 4,17 40 M M10 5, M10 5,54 40 M M12 8, M12 13, M M16 26, M16 41 VIBRATIO-COTROL RUBBER MOUTS WITH 1 THREADED HOLE AD 1 THREADED PI ITEM: 8011 mechanical structures vibrations. Those vibration-control mounts are composed by molded rubber M/F version with single threaded pin and threaded blind hole 01 D M4 1, M M6 2, M6 2, M6 2,26 30 M M8 2, M8 2,75 30 M M8 3, M8 3, M10 6,46 50 M M10 5, M12 8,31 60 M

77 VIBRATIO-COTROL RUBBER MOUTS WITH SIGLE THREADED PI ITEM: 8012 mechanical structures vibrations. Those vibration-control mounts are composed by molded rubber P/M version with single threaded pin 01 D M4 1,69 15 M M6 2,03 20 M M8 3, M8 3, M M10 5,16 50 M M5 1, M M6 0, M6 1, M6 2,24 25 M M6 1, M6 2, M8 2,89 30 M M10 3, M10 3, M10 5,25 40 M M12 7, M12 11,60 40 M M12 12, M16 20, M

78 WHEELS TABLE/CHART.78

79 GRAY RUBBER WHEELS - POLYAMIDE CETRE ITEM: 8030 Gray rubber wheel ring, polyamide centre with thread-guards, electrolytically galvanised supports. Dimensions expressed in mm G 4, G 7, F 4, F 5, GFR 8, GFR 11, ITEM: 8032 Dimensions expressed in mm P 4, P 7, PFR 8, PFR 11, SUITABLE For use in wet environments and with medium corrosive chemicals. OT RECOMMEDED For use in environments with organic solvents, chlorinated substances, hydrocarbons and mineral oils

80 BLACK RUBBER WHEELS SHEET METAL DISC ITEM: 8035 Black rubber ring, electrolytically galvanised sheet steel discs. Dimensions expressed in mm R 2, R 2, R 3, R 5, R 8, ITEM: 8040 Black rubber ring, electrolytically galvanised sheet steel discs, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm G 7, G 7, G 11, G 12, G 23, F 5, F 5, F 7, F 9, F 18, GFR 13, GFR 13, GFR 17, GFR 18, GFR 32, SUITABLE For use in wet environments and with medium corrosive chemicals. OT RECOMMEDED For use in environments with organic solvents, chlorinated substances, hydrocarbons and mineral oils

81 POLYURETHAE WHEELS - POLYAMIDE CETRE ITEM: 8045 Injected polyurethane ring, polyamide 6 centre. Dimensions expressed in mm R 2, R 3, R 6, R 8, R 16, ITEM: 8050 Injected polyurethane ring, polyamide 6 centre, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm G 8, G 8, G 13, G 22, G 31, F 6, F 6, F 10, F 17, F 25, GFR 14, GFR 14, GFR 19, GFR 31, GFR 40, SUITABLE For use in environments with weathering agents, alcohol and glycol, organic acids and minerals, water and saturated steam. ote: the 60 series can be supplied with stainless steel supports, particularly recommended for medical and foodstuff environments and for particularly strong substances

82 ITEM: 8055 Solid polyamide 6 wheels. POLYAMIDE WHEELS Dimensions expressed in mm R 2, R 3, R 5, R 8, R 15, ITEM: 8060 Solid polyamide 6 centre, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm G 7, G 8, G 12, G 21, G 29, F 5, F 6, F 9, F 17, F 24, GFR 12, GFR 13, GFR 18, GFR 29, GFR 37, SUITABLE For use in wet environments and with highly aggressive chemicals. OT RECOMMEDED For use in environments with strong organic acids and mineral concentrates ote: the 68 series can be supplied with stainless steel supports, particularly recommended for medical and foodstuff environments and for particularly strong substances..82

83 POLYURETHAE WHEELS - ALUMIIUM CETRE ITEM: 8065 TR polyurethane ring, aluminium centre. Dimensions expressed in mm R 12, R 18, R 20, R 27, R/A* 43, R/B* 44, *dimensions for pallet trucks ITEM: 8070 TR polyurethane ring, aluminium centre, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm G 17, G 23, G 27, G 40, G 57, F 15, F 21, F 24, F 35, F 52, GFR 22, GFR 29, GFR 32, GFR 48, GFR 65, SUITABLE For use in environments with weathering agents, alcohol and glycol. OT RECOMMEDED For use in environments with mineral and organic acids, base solutions and saturated steam

84 POLYURETHAE WHEELS - CAST IRO CETRE ITEM: 8075 TR polyurethane ring, mechanical cast iron centre. Dimensions expressed in mm R 21, R 27, R 36, R 57, ITEM: 8080 TR polyurethane ring, mechanical cast iron centre, galvanised colonial yellow sheet steel heavy supports, rotating parts with double ball bearings lubricated by grease, red polyamide 6 dust guard ring. Dimensions expressed in mm G 38, G 44, G 63, G 88, F 29, F 35, F 48, F 70, GFR 43, GFR 50, GFR 77, GFR 101, SUITABLE For use in environments with weathering agents, alcohol and glycol. OT RECOMMEDED For use in environments with mineral and organic acids, base solutions and saturated steam

85 SIGMA ELASTIC RUBBER WHEELS ALUMIIUM CETRE ITEM: 8082 SIGMA ELASTIC rubber ring, aluminium centre. Dimensions expressed in mm R20* 32, R25* 33, *dimensions for pallet trucks SUITABLE For use in wet environments and with medium corrosive chemicals. OT RECOMMEDED For use in environments with organic solvents, aromatic substances, chlorinated substances, hydrocarbons TR-ROLL POLYURETHAE WHEELS CAST ALUMIIUM CETRE ITEM: 8085 Hardness 75 Shore A. Suitable for use in industrial environments for transport of medium-heavy loads, also for mixed external-internal use. Dimensions expressed in mm R-C 23, R-C 37, R-C 52, SUITABLE Suitable for use in industrial environments for transport of medium-heavy loads, also for mixed external-internal use..85

86 TR-POLYURETHAE ROLLERS CAST ALUMIIUM CETRE ITEM: 8090 Dimensions expressed in mm G 44, G 62, G 71, G 89, F 35, F 49, F 56, F 71, GFR 51, GFR 76, GFR 85, GFR 102, SUITABLE For use at speeds up to 16 km/h and are, therefore, indicated for mechanical and mixed mechanicalmanual handling

87 ALICO ALLOY PERMAET MAGETS ITEM: 8101 Alnico permanent magnets shielded with a brass ring, the shielding ensures increased magnetic coercivity allowing this product to maintain its shape even when inserted in ferrous components, the outer protection provides impact resistance. Heat-resistant up to A B C 81019,5 4, M ,7 4, M ,5 4, ,6 5, , M , , , , M , ITEM: A B C , M ,6 6, M , ITEM: A B C , ,4 9, ITEM: A B C D E F , , ,

88 ALICO ALLOY PERMAET MAGETS ITEM: 8105 Alnico permanent magnets heat-resistant up to A B , , , EODYMIUM PERMAET MAGETS ITEM: 8110 Composed of an iron casing and a neodymium internal magnet, pieces of electric discharging machines. 01 A B C M 8110A 14, B 19, M D 26, FERRITE RUBBER PERMAET MAGETS ITEM: 8111 Magnetic rubber is a very malleable compound that is easily shaped, it does not feature a strong magnetic force, but if suitably applied it can solve major adhesion problems on walls and iron structures, it is easily applied. 01 A B C D X20 1, X30 4, ,

89 QUICK CLAMPS ITEM: 8400 VERTICAL SERIES Galvanised hardened sheet steel clamping lever with plastic cover, supplied without spindle. 01 A B C D E F L M O. Q , , ,5 25, , , , , ,5 M , , , QUICK CLAMPS ITEM: 8410 HORIZOTAL SERIES Galvanised hardened sheet steel clamping lever with plastic cover, supplied without spindle. 01 A B C D E F L M O. Q , , ,2 7 1,2 10 M4 4, , , , , ,5 58 M , , , ,5 41,5 12, M HORIZOTAL SERIES WITH WITH ATI-REALEASE LEVER ITEM: 8410 HORIZOTAL SERIES Some sizes of this series are also made of stainless steel and are shown in red. The main feature of this series is the special anti-release lever with the purpose of avoiding any accidental openings caused by from being crushed by the levers when opening. 01 A B C D E F L M O Q , ,5 5, M5 4, , ,5 56, ,4 28,4 6,3 16 2,5 32 M6 5, , ,5 36, ,5 8, M8 6,

90 QUICK CLAMPS ITEM: 8420 STRAIGHT-LIE ACTIO SERIES Galvanised hardened sheet steel clamping lever with plastic cover, base body of lacquered brass, * painted forged steel body, supplied without spindle. 01 A B C D E F L M O. Q * , M , , * 56, M ,10 164, , , M , CLAMPIG SYSTEM ITEM: 8435 The circular movement of the handle is transformed in linear action ofthe latch. These clamps are mostly used to fasten hinged lids and forcontainers. Holding capacities from 160 to 700 da, and from 1700 to 4000 dafor heavy series. The hook can be set within the adjustment range (D). The mainfeature of different models are as follow. The bearing surface is parallel asto the line of action to the force. 01 A B C D E F L M Q , ,3 25 M , , ,5 48 M , , ,5 58 M8 750 SPRIG PLUGERS WITH SLOT AD BALL, STEEL ITEM: 8440 Material: Sleeve steel grade 5.8. Ball steel. Spring in spring steel class D. Version: Black oxidised. Ball hardened. 01 D D1 L ,84 M3 1,5 7 0,5 0,4 1, ,42 M4 2,5 9 0,8 0, ,42 M ,9 0, ,42 M6 3, ,84 M ,5 1, ,84 M , ,86 M ,

91 ITEM: 8441 Material: Stailess steel Sleeve Ball Spring Version: Bright. Ball, hardened. SPRIG PLUGERS WITH SLOT AD BALL, STAILESS STEEL D D1 L ,48 M3 1,5 7 0,5 0,4 1, ,85 M4 2,5 9 0,8 0, ,85 M ,9 0, ,85 M6 3, ,08 M ,5 1, ,71 M , ,12 M , SPRIG PLUGERS WITH HEXAGO SOCKET AD THRUST PI, STEEL ITEM: 8445 Material: Sleeve in steel grade 5.8; thrust pin in steel. Spring steel spring Grade D. Version: Black oxidised. Thrust pin hardened D D1 L ,06 M ,5 1 0,4 0,7 0,5 3 1, ,25 M4 1,5 15 0,6 0,6 1, ,07 M5 2,4 18 2,3 0,8 0,8 1, ,25 M6 2,7 20 2,5 2, ,66 M8 3,5 3 2, ,4 1, ,28 M10 4 3, ,28 M SPIDLE WITH EOPREE THRUST ITEM: 8430 Galvanised steel screw with two nuts. 01 A D F 8430M5 2,90 45 M M6 3,30 55 M M8 3,90 68 M M10 4,30 80 M

92 DRILL JIG BUSHIGS DI 179 SHORT SERIES ITEM: 179/C Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness HRc , ,1 1, ,2 1, ,3 1, ,4 1, ,5 1, ,6 1, ,7 1, ,8 1, ,9 1, , ,2 1, ,3 1, ,4 1, ,5 1, ,6 1, ,7 1, ,8 1, ,9 1, , ,1 1, ,2 1, ,3 1, ,4 1, ,5 1, ,6 1, ,8 1, ,9 1, , ,1 1, ,5 1, , ,1 1, ,25 1, ,5 1, ,6 1, ,8 1, , ,5 1, , ,25 2, ,5 2, ,75 2, , , ,5 2, , , ,5 2, , ,5 2, , ,5 2, , ,5 3, , ,5 3, , ,5 3, , ,5 4, , ,5 4, , ,5 4, , ,5 4, , ,5 4, , ,5 4, , ,5 4, , ,5 4, , ,5 6, , ,5 6, , ,5 6, , ,5 6, , ,5 8, , ,5 8, , ,5 8, , , , , , , , , , , , , , , , ,

93 DRILL JIG BUSHIGS DI 172 SHORT SERIES ITEM: 172/C Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness HRc , ,1 2, ,2 2, ,3 2, ,4 2, ,5 2, ,6 2, ,7 2, ,8 2, ,9 2, , ,1 2, ,2 2, ,3 2, ,4 2, ,5 2, ,6 2, ,7 2, ,8 2, ,9 2, , ,1 2, ,2 2, ,3 2, ,4 2, ,5 2, ,6 2, ,7 2, ,8 2, ,9 2, , ,1 2, ,5 2, , ,1 2, ,25 2, ,5 2, ,6 2, ,75 2, ,8 2, , ,5 2, , ,25 2, ,5 2, ,75 2, , , ,5 3, , , ,5 3, , ,5 3, , ,5 3, , ,5 4, , ,5 4, , ,5 4, , ,5 5, , ,5 5, , ,5 5, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

94 DRILL JIG BUSHIGS DI 179 LOG SERIES ITEM: 179/L Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness HRc , , ,2 1, ,5 1, , ,3 1, ,5 1, , ,5 2, ,6 2, , ,5 2, , , ,5 2, , , , , , , , , , , , DRILL JIG BUSHIGS DI 172 LOG SERIES ITEM: 172/L Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness HRc , , ,5 2, , ,1 2, ,3 2, ,5 2, , ,5 2, , ,5 2, , , ,5 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

95 THREADED ISERTS SELF-TAPPIG WITH CUTTIG SLOT ITEM: 8600 Material: Steel Version: Steel, case-hardened, galvanized. ote: Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore. 01 D1 L ,60 M ,80 M ,00 M ,10 M ,80 M ,80 M ,50 M ,00 M Price for 100 pcs. THREADED ISERTS SELF-TAPPIG WITH CUTTIG SLOT ITEM: 8601 Material: Stainless Steel Version: Stainless steel bright. ote: Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore. 01 D1 L ,70 M ,00 M ,00 M ,80 M ,60 M ,90 M ,60 M Price for 100 pcs..95

96 WIRE THREAD ISERTS ITEM: 8610 Austenitic stainless steel 18/8 01 A B C 8610M30515D 35,20 4,00 4,50 6, M3051D 33,80 2,50 3,00 5,00 3, M3052D 38,90 5,50 6,00 8, M04071D 28, M040715D 31, M04072D 34, M05081D 34, M050815D 32, M05082D 35, M0611D 35, M06115D 35, M0612D 39, M081251D 37, M D 41, M081252D 48, M D 66,60 18,8 20,00 25,00 8, M101251D 56, M D 83, M101252D 100, M101501D 44, M D 50, M101502D 58, M121251D 80, M D 123, M121252D 165, M121751D 67, M D 80, M121752D 102, M141251D 80, M D 123, M141252D 165, M142001D 139, M D 148, M142002D 205, M162001D 120, M D 150, M162002D 181, M182501D 362, M D 435, M182502D 482, M202501D 244, M D 325, M202502D 479, Price for 100 pcs. TAPS FOR WIRE THREAD ISERTS ITEM: 8630 For hand or machine use M3X0,5 18, M4X0,7 18, M5X0,8 19, M6X1,0 19, M8X1,25 21, M10X1,25 42, M10X1,50 25, M12X1,25 47, M12X1,75 38, M14X1,25 63, M14X2,0 54, M16X2,0 64, M18X2,5 102, M20X2,5 129,00.96

97 MADRELS FOR WIRE THREAD ISERTS ITEM: M3X0,5 58, M4X0,7 47, M5X0,8 44, M6X1,0 44, M8X1,25 44, M10X1,25 49, M10X1,5 46, M12X1,25 49, M12X1,75 46, M14X1,25 87, M14X2,0 87, M16X2,0 87, M18X2,5 118, M20X2,5 118,30 THREAD ISERTS REPAIR KITS ITEM: 8670 Supplied in plastic case. One dimensional KM , KM , KM , KM , KM , KM , KM , KM , KM , KM ,00 THREAD ISERTS REPAIR KITS ITEM: 8690 Supplied in plastic case. Multi dimensional KITMULTI 335,20.97

98 YLO ACHOR SX MODEL, WITH RIM AD SCREW The 4-way expansion provides the optimum force distribution in the material, and offers high load-bearing capacities in solid and hollow building materials. The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster. The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation. hollow building materials, aerated concrete and to bridge plaster Building materials concrete, perforated sand-lime brick, solid sand-lime brick, natural stone with dense structure, aerated concrete, solid panel made from gypsum, solid brick made from lightweight concrete, solid brick , , , , UIVERSAL PLUG FU WITH RIM AD SCREW The universal operating principle (knotting or expanding) allows for use in all solid, hollow and board building materials. Thus the FU is the correct choice for unknown base materials. The FU's angled connection ridges allow for optimum screw guidance. Serrated anti-rotation locks prevent rotation in the drill hole. This guarantees the greatest possible installation safety. Fixing sets with screws, eye screws and hooks provide the right solution for all applications. Building materials , , , ,

99 BRASS FIXIG PO installation safety. Building materials Concrete and natural stone with dense structure. 01 M , , , , HEAVY-DUTY ACHOR TA M-S MODEL WITH TE SCREW The optimized geometry minimise setting energy and allows for use in extremely narrow spaces. This allows for userfriendly installation. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use. The red plastic cap protects against soiling and thus ensures free-running of the thread. Versions zinc-plated steel. Building materials Approved for concrete C20/25 to C50/60, noncracked, also suitable for concrete C12/15 natural stone with dense structure , , , ,

100 HEAVY-DUTY ACHOR SLM WITH SCREW TE 8.8 The optimized geometry minimizes setting energy and allows for use in extremely narrow spaces. This allows for userfriendly installation. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use. The red plastic cap protects against soiling and thus ensures free-running of the thread. Building materials Approved for, concrete C20/25 to C50/60, non-cracked. Also suitable for, concrete C12/15 natural stone with dense structure , , , ,

101 BOLT ACHOR ZIC-PLATED STEEL anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Building materials Approved for concrete C20/25 to C50/60, non cracked Also suitable for concrete C12/15 and natural stone with dense structure 01 M , , , , , , , , , , , , , , , , , , , , , ,

102 BOLT ACHOR FAZ II MODEL smaller anchor plates are required. reinforcement hits. This allows for a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (sismic). Building materials Approved for concrete C20/25 to C50/60, cracked. Concrete C20/25 to C50/60, non-cracked. Also suitable for concrete C12/15, natural stone with dense structure , , , , , , , , , , , ) Approved for sismicperformance category C1 according to ETA-05/

103

104 LOBE KOBS ITEM: 8700 and greases, polished zinc-plated steel stud. 01 D L ,30 10 M , , , ,31 30 M , , , , , , , M , , , , , , ,77 50 M , , , ,48 30 M ,49 40 ITEM: 8710 and greases, brass bushing with threaded hole. h l1 h d1 d2 d d d1 d D 0,3 l l2 L D 0,3 l2 L 01 D L , M ,69 M ,82 M , ,16 13 M , ,63 M , ,49 M

105 FIXED HADLES ITEM: 8720 and greases, polished zinc-plated steel stud. l 0,3 L D d1 d 01 L D , M , M , M , , M ,26 30 REVOLVIG HADLES ITEM: 8730 greases and other chemical agents, polished steel pin with hexagonal socket at the threaded end. h L D d1 d s 01 L D , M , , , M , ,92 M , ,67 M12 20 SMOOTH KOB HADLES ITEM: 8745 oils and greases, brass bushing with threaded blind hole. 01 D L ,94 M , ,99 M ,90 15 M , M ,01 M , M , ,96 M

106 HADLES ITEM: 8750 and greases, threaded blind hole. L D d1 d l1 01 L D , M ,43 M ,43 M , ,74 M12 l SPOKED HADWHEELS ITEM: 8760 Black reinforced, highly resistant Duroplast body with polished uncovered front end, not drilled. D d2 l2 L B l 01 D L B , , , , d1 SPOKED HADWHEELS WITH REVOLVIG HADLE ITEM: 8770 Black reinforced, highly resistant Duroplast body with polished uncovered front end, not drilled. B l2 l HADLES ITEM: 8755 Material phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents. 01 L F B , M D d2 R m L H 01 D L B , M , M , , M10 76 d1.106

107 ADJUSTABLE HADLES ITEM: 8780 element, resistant to solvents, oils, greases and other chemical agents, burnished steel stud, black galvanised steel retaining screw, AISI 302 return spring. 01 L D ,18 16 M , , , , , ,27 M , , , , , , ,60 M , , , , M , , , M12 50 ADJUSTABLE HADLES ITEM: 8790 element, resistant to solvents, oils, greases and other chemical agents, burnished steel bushing with threaded blind hole, AISI 302 return spring. 01 L D ,10 M ,10 M , ,40 M , ,10 M , M

108 POLISHED IRO STRAPS ITEM: 9100 Breaking load 70/75 Kg/mm², rounded edges, oiled surface, individually wrapped roll ,10 3,10 3, Advertised price is per kg. HIGH-RESISTACE BLUE IRO STRAPS ITEM: 9115 Breaking load 80/85 Kg/mm², rounded edges, waxed surface ,10 4, Advertised price is per kg. SEALS FOR STEEL STRAPS ITEM: 9130 Polished steel SM SM SM 01 22,40 23,50 29, Advertised price is for 1000 pcs. PLASTIC STRAPS ITEM: 9150 Breaking load 28/32 Kg/mm², black polypropylene, embossed surface F F F F F F ,60 4,60 3,60 3,80 3,80 5, Advertised price is for 100 m. SEALS FOR PLASTIC STRAPS ITEM: 9160 Chased burnished steel SP SP 01 20,60 25, Advertised price is for 1000 pcs..108

109 COMPOSITE POLYESTER STRAPPIG ITEM: 9285 Manufactured from high tenacity twisted polyester yarns embedded in resin coating. Compact structure to facilitate feeding under pallets and through container hooks, featuring good angle cutting resistance also without angle/edge guards, high retain tension and shape under extreme weather conditions shock absorbent, UV and water protected,will not rust or rot in the event of moist, its operating temperature range may vary from -40 up to +100 C, perfectly adapts to the load shape,will not scratch or mark product surface. strapping, steel threaded buckles, providing the strongest and most reliable join the cargo strapping industry. Compliant with pean Railway Regulation B ,00 150,00 150, BLR = Breaking Load Ribbon BLRB = Breaking Load Ribbon + Buckle MSL = Maximum Safety Load POLYESTER STRAPPIG STEEL THREADED HOOKS ITEM: ,50 101,00 87, pc packaging BATTERY STRAPPIG TOOL ITEM: 9288 Battery strapping tool with brushless motor, tension and vibration sealing. For model it is recommended to use PP-PET straps from mm, thickness 0,5-1,05 mm. For model it is recommended to use PP-PET straps from 16 mm, thickness 0,8-1,05 mm and ET from 19 mm, thickness 0,7-1,27mm.1 battery and e 1 charger included , , % 80% 3,8 3,8 STRAP STRETCHERS FOR METALLIC STRAPS WITH SEAL ITEM: 9200 Simultaneous strap-cutting and seal-closing operation ,00 550,80.109

110 STRAP STRETCHERS FOR METALLIC STRAPS WITHOUT SEALS ITEM: 9210 Interlocking closing system and strap cutting, easy adjustment to the desired size, the resistance of the closure without seal is higher than the one with seal and greatly reduces the execution time ,50 STRAP STRETCHERS FOR PLASTIC STRAPS WITH SEAL ITEM: 9220 Long lever for reduced closing effort ,00 13 ITEM: 9230 Long lever of pressed steel and with anatomic handles, reduced closing effort and excellent grip comfort ,00 16 MAUAL POLYESTER STRAP TESIOER ITEM: 9296 Manualtensioners allow operators to bring polyester strap to desired tension. 9296T ,00 STRAP HOLDERS FOR METALLIC STRAP ITEM: ,10 107,10.110

111 STRAP HOLDERS FOR PLASTIC STRAPS ITEM: F ,20 STRAP HOLDERS FOR PLASTIC STRAPS ITEM: F ,10 POLYESTER STRAPPIG DISPESER ITEM: 9290 Mobile wheeled dispenser to store your strapping tools and accessories together for easy mobility and use, extra sturdy heavy-duty cart, large wheels for easy of rolling over rough ground or gravel. Strapping brake keeps the strapping from unwinding, Tool tray on top to hold your strapping tools and closures hand and in one place , POLYESTER STRAP SHEARS ITEM: 9291 Dual-blade, ergonomically designed, safety strap shears, 2 blades (smooth and serrated), ultra precise, fray free Advanced fulcrum for greater cutting force. Advanced fulcrum for greater cutting force ,00.111

112 MAUAL POLYESTER STRAP TESIOER ITEM: 9295 Manualtensioners allow operators to bring polyester strap to desired tension. 9295T ,00 TRASPARET STRETCH FILMS ITEM: 9300 Four-coil pack each equipped with a plastic distributor and a rubber holding handle. High elastic properties and puncture / , ITEM: 9310 Thirty-coil pack with one plastic distributor and a rubber holding handle / , TRASPARET STRETCH FILMS ITEM: 9320 Six-coil pack, high elastic properties and puncture resistance, suitable for a broad range of packaging needs / , ITEM: 9370 Single coil ,45 23,15 24, HADLES FOR STRETCH FILMS ITEM: 9340 For coils with a 50 mm hole. 9340MA 01 7,20.112

113 COLOURED STRETCH FILMS ITEM: 9350 Four-coil pack, high elastic properties and puncture resistance, suitable for a broad range of packaging needs. 9350BIACO 9350ERO ,20 109, DISTRIBUTORS FOR STRETCH FILM COILS ITEM: 9360 for coils of 500 mm height and with mm hole. 9360DIST 01 75,50 BOX SBALIG TAPES ITEM: 9400 Silent polypropylene suitable for all packing and packaging needs. 9400AV 9400TRASP 9400BIACO 01 1,71 1,71 1, AV TRASP BIACO 01 3,37 3,37 3, ADHESIVE MASKIG TAPES ITEM: 9410 Paper, suitable for covering and marking out areas for painting operations ,14 2,86 3,47 4,23 4,

114 ADHESIVE ISULATIG TAPES ITEM: 9420 Black PVC, suitable for insulating and protecting electric components ,65 3, ADHESIVE FABRIC-REIFORCED TAPES ITEM: 9430 Reinforced, high adherence, waterproof, suitable for packing, repairing, joining and protecting a wide range of materials. Silver / , ADHESIVE FABRIC-REIFORCED TAPES ITEM: 5080 Triple-layer highly tear resistant and waterproof up to four atmospheres, temperature resistant from -10 C to +70 C, suitable for high-sealing emergency repair. Silver / , TAPE STRETCHERS ITEM: 9450 Plastic body, adjustable clutch, suitable for tapes with a height of up to 50 mm. 9450S ,60.114

115 PROTECTIVE TUBULAR ETS ITEM: 9500 Resistant to acids and solvents, suitable for protecting tools and mechanical parts in general ,35 0,37 0,68 0,82 1,01 YELLOW 200 POLYTHEE AIR BUBBLE ROLLS ITEM: 9520 High shock-absorbing quality, resistant to impacts and tearing, suitable for wrapping and protecting objects of any shape and size, odour-free and chemically neutral, can also be used for protecting food products ,00 314, The price refers to the sale of 1kg of product. CARDBOARD SHIPPIG BOXES ITEM: 9520 Double wave ,75 1,85 1,95 2,15 8,65 15,00 * compatible in size with the chipboard pallet WOODE CHIPBOARD PALLETS ITEM: ,60 9,70.115

116

Cordless Tools Lithium-ion Technology

Cordless Tools Lithium-ion Technology 22 Professional Blue Power Tools for Trade & Industry Cordless Tools Lithium-ion Technology 00% drill/driver at half the size Only half the size of a 2-volt standard cordless drill/driver Professional

More information

10.8V KIT. Bosch Power Tools Product Information. Specifications. Part Number: Barcode:

10.8V KIT. Bosch Power Tools Product Information. Specifications. Part Number: Barcode: 10.8V KIT Includes: 1x GDR 10.8Li Impact Driver 1X GOP 10.8V-Li Multi-Cutter 1x GSR 10.8-2Li Drill Driver 2x 1.3Ah 10.8V Li-Ion Batteries 1x 30min Charger Specifications GOP 10.8V-LI No-load speed 5.000

More information

GWS 850 C Professional Angle Grinder

GWS 850 C Professional Angle Grinder Bosch Power Tools tions 2018 GWS 80 C Professional Angle Grinder The lightweight tool with high performance Order the GWS 80 C (1/230 V) to receive special pricing. Powerful 80 watts with Constant Electronics

More information

Slim Grip. Vibration Control Patented vibration damping. Lithium-ion technology No self-discharge. No memory effect.

Slim Grip. Vibration Control Patented vibration damping. Lithium-ion technology No self-discharge. No memory effect. Slim Grip Vibration Control Patented vibration damping system. Lithium-ion technology No self-discharge. No memory effect. Professional Blue Power Tools for Trade & Industry 1 2 Professional Blue Power

More information

Bosch Home Exclusive Line

Bosch Home Exclusive Line Bosch Home Exclusive Line Make it your home with the Bosch Home Exclusive Line. With Bosch s DIY power tools you always have the right tool at hand for your projects at home. Make it your home. All DIYers

More information

Bosch Blue Power Tools & Accessories. July December 2014

Bosch Blue Power Tools & Accessories. July December 2014 BluePrint Bosch Blue Power Tools & Accessories July December 2014 5.0Ah Get more power at the same size with the new Bosch 18V 5.0Ah battery THE OFFICIAL POWER TOOL OF TOUGH MUDDER Customer Service you

More information

SPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm

SPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling

More information

Threaded rod cutters. Trapezoid-sheet pliers TOOLS. Field of application Very simple cutting of threaded rods on site

Threaded rod cutters. Trapezoid-sheet pliers TOOLS. Field of application Very simple cutting of threaded rods on site Threaded rod cutters Very simple cutting of threaded rods on site Cuts galvanised threaded rods in the qualities 4.6 and 5.8 No reworking of the threaded rods necessary Clean cut allows the nuts to be

More information

Bosch Blue Power. The ultimate system for stainless steel: perfect handling for a perfect finish R A8 000 R

Bosch Blue Power. The ultimate system for stainless steel: perfect handling for a perfect finish R A8 000 R Bosch Blue Power Promotion valid from 01/09/2013 to 31/12/2013 The ultimate system for stainless steel: perfect handling for a perfect finish NEW! Professional Powerfile NEW! Pipe Belt Sander GEF 7 E Professional

More information

One battery to run them all! BluePrint July September 2016

One battery to run them all! BluePrint July September 2016 Real Bosch! Real Offers! One battery to run them all! BluePrint July September 2016 Blue Power Tools & Professional Accessories: for trade and industry wwwbosch-professionalcouk We reserve the right to

More information

10.5 gal. Vertical Oil Lubricated Air Compressor

10.5 gal. Vertical Oil Lubricated Air Compressor 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable

More information

Rotary Hammers and Demolition Hammers

Rotary Hammers and Demolition Hammers 50 Professional Blue Power Tools for Trade & Industry Professional Blue Power Tools for Trade & Industry 51 Immense power for the toughest jobs. With the rotary hammers from 2 11 kg and the demolition

More information

Cordless angle grinder ACCUFLEX 18.0 V, 125 mm. L EC/5.0 Set

Cordless angle grinder ACCUFLEX 18.0 V, 125 mm. L EC/5.0 Set Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless angle grinder ACCUFLEX 8.0 V, 25 mm L 25 8.0-EC/5.0 Set Order number 47.947 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah

More information

Bosch Blue Power. Wood Professionals R EC2. Valid from 1st February to 30th April 2013

Bosch Blue Power. Wood Professionals R EC2. Valid from 1st February to 30th April 2013 Bosch Blue Power Valid from 1st February to 30th April 2013 Wood Professionals Industrial Jigsaws + 16 FREE Blades GST 150CE / GST 150BCE Professional The most powerful Jigsaw in its class. } High power

More information

Symbols and their meaning.

Symbols and their meaning. Professional Blue Power Tools For Trade & Industry Range for 2013/2014 Symbols and their meaning. Guide rail For precise cuts. Lithium-ion technology No self-discharge. No memory effect. "Plus-clean" system

More information

G10SR3(H6) 100mm Angle Grinder

G10SR3(H6) 100mm Angle Grinder CORDLESS PNEUMATIC DRILLING ROTARY & Model Wheel Diameter Input Power QUICK REFERENCE GUIDE FOR GRINDERS Spindle Thread Anti Vibe Handle UVP Switch Type Trigger Lock G10SN 100mm 840W 10000 (min-1) M10

More information

Compact, flexible, clever: One 10.8 volt battery for all tools!

Compact, flexible, clever: One 10.8 volt battery for all tools! Compact, flexible, clever: One 10.8 volt battery for all tools! Make it your home with the 10.8 volt cordless system from Bosch. Whether in the house or garden, the tools impress with their compact power

More information

Cordless rotary hammer drill 18,0 V CHE 18.0-EC

Cordless rotary hammer drill 18,0 V CHE 18.0-EC Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless rotary hammer drill 8,0 V CHE 8.0-EC Order number 430.005 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah No load speed 0-400

More information

Sheet metal work 78 Slitting Shears 80 Sheet Metal Shears 83 Nibblers 86

Sheet metal work 78 Slitting Shears 80 Sheet Metal Shears 83 Nibblers 86 FEIN General Catalog 2018/2019 Welcome to FEIN In the new FEIN General Catalog 2018, you ll find our complete range of professional and extremely reliable power tools for trades and industry. Designed

More information

10.8 Volt Cordless Barebones Tools

10.8 Volt Cordless Barebones Tools 10.8 Volt Cordless Barebones Tools GSR 10.8 V-LI BAREBONES Drill Driver t At 178mm, it is designed for optimum handling, includes L-BOXX insert t Quick change ¼" Hex bit holder GSR 10.8 V-LI BB No-load

More information

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32 Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31

More information

Electric Power Tools Created :05 Revised :08 Page 1

Electric Power Tools Created :05 Revised :08 Page 1 2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric

More information

DIY (Personal Use Only)

DIY (Personal Use Only) 1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026

More information

UK RANGE CATALOGUE NEW 2016 RANGE

UK RANGE CATALOGUE NEW 2016 RANGE UK RANGE CATALOGUE 2016-17 NEW 2016 RANGE POWER TOOLS STATIONARY GARDEN TOOLS ACCESSORIES Purchase as a kit...or buy separately OUR ONE BATTERY FITS ALL FAMILY > > SAVE s > > SAVE s + + POWERS 14 POWER

More information

Fein The Metal Industry Specialists

Fein The Metal Industry Specialists www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING

More information

Fein The Metal Industry Specialists

Fein The Metal Industry Specialists www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING

More information

Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption

Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption 3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight

More information

Pneumatic tools and accessories. For trades and businesses.

Pneumatic tools and accessories. For trades and businesses. Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact

More information

CATALOG 2017

CATALOG 2017 www.hpschou.com CATALOG 2017 PRESENTS A RANGE OF TOOLS Introducing the new Probuilder Power-tool concept The new Probuilder concept, one 18 V lithium battery platform for all Power-tools, designed for

More information

SANDERS AND ABRASIVES

SANDERS AND ABRASIVES 22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt

More information

FLEX cordless tools. Sustainable optimum performance

FLEX cordless tools. Sustainable optimum performance FLEX cordless tools Sustainable optimum performance EC technology allows you to work efficiently, at high power, for a longer time and, importantly, without the need for any maintenance work. The brushless

More information

Portable work- and clamping system

Portable work- and clamping system CROC LOCK Portable work- and clamping system An amazing work bench for many applications such as for example holding doors, fences, wood, ceiling boards, bikes, metal, automotive components and many other

More information

The new FEIN cordless drill/drivers. Unbeatable in metal.

The new FEIN cordless drill/drivers. Unbeatable in metal. METAL The new FEIN cordless drill/drivers. Unbeatable in metal. Noticeably improved drilling, tapping and screwdriving applications. 2 FEIN CORDLESS DRILL/DRIVERS FOR METAL Real metalworkers can feel the

More information

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT 128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel

More information

DRILLING AND SCREWDRIVING. Product range. Tools for the toughest demands

DRILLING AND SCREWDRIVING. Product range. Tools for the toughest demands DRILLING AND SCREWDRIVING Product range Tools for the toughest demands Most cordless tools are simple everyday objects. A Festool drill, however, is something unique. A cordless drill has certain basic

More information

CORDLESS RANGE. Polígono Indutrial O Rebullón s/n Mos - España -

CORDLESS RANGE. Polígono Indutrial O Rebullón s/n Mos - España - 29 07 CORDLESS RANGE CORDLESS RANGE INNOVATIVE CORDLESS SOLUTIONS FOR TOUGH CONDITIONS AEG POWERTOOLS offer today s professional user a wide range of innovative, powerful cordless solutions that are capable

More information

HAZET Range of Pneumatic Tools

HAZET Range of Pneumatic Tools Pneumatic Tools HAZET Range of Pneumatic Tools Extensive range of pneumatic tools: Impact Wrenches 2345 Air Ratchets 123E Drill, Angle Drill Die Grinders, straight and angled Chisel Hammer et Orbital ander,

More information

PRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED

PRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING

More information

Professional power in every voltage class The right tool for every job

Professional power in every voltage class The right tool for every job power in every voltage class The right tool for every job Range for 2008 / 2009: blue cordless tools for professionals from professionals www.bosch-pt.com 02 Summary of contents power in every voltage

More information

DH18DSL(HX) Ì4ÇÄ_l0[:"Î. 18V Slide Rotary Hammer Specifications. Also Available Naked DH18DSL(H4)

DH18DSL(HX) Ì4ÇÄ_l0[:Î. 18V Slide Rotary Hammer Specifications. Also Available Naked DH18DSL(H4) DH18DSL(HX) 18V Slide Rotary Hammer 03387921 DH18DSL(H4) 01857564 Ì4ÇÄ_l0[:"Î 4 9 6 6 3 7 6 1 6 5 9 2 6 Impact rate SDS plus 999100 Masonry 16mm 18mm 0 750 / 0 1,500 (min-1) 0 3,100 / 0 6,200 (min-1) SDS

More information

Hollow Spindle Oil Country Lathes

Hollow Spindle Oil Country Lathes Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400

More information

CORDLESS TOOLS GD_PG_$KT-K10-$KP-AKTE-$PG-UMAKK :37:27

CORDLESS TOOLS GD_PG_$KT-K10-$KP-AKTE-$PG-UMAKK :37:27 CORDLESS TOOLS CORDLESS REVERSIBLE RATCHET Cordless reversible ratchet Cordless reversible ratchet With torque control Drive: 1/4" 220 U/min. 33 Nm 5 A - 1,5 Ah Drive: 1/2" 180 U/min. 50 Nm 5 A - 1,5 Ah

More information

FEIN Price Catalogue machines and accessories 2017

FEIN Price Catalogue machines and accessories 2017 FEIN Price Catalogue machines and accessories 2017 Welcome to FEIN your specialist in metal and interiors. FEIN is synonymous with extremely reliable application solutions for manual trades and industry

More information

Cordless Systems. Cordless Systems. Hilti. Outperform. Outlast.

Cordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless Systems Hilti. Outperform. Outlast. 52 Introduction Introduction Page 54-55 Drill drivers Cordless compact drill driver SFC 22-A Page 56 Cordless hammer drill driver SFH 22-A Page 57 Accessories

More information

Can handle more than 1 million screw connections.

Can handle more than 1 million screw connections. INTERIOR Can handle more than 1 million screw connections. FEIN drywall screw gun available as battery- or mains-powered tool. ASCT 18 M: more than 2,300 screw connections with one battery charge! New

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

Cordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless. Systems

Cordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless. Systems Hilti. Outperform. Outlast. 49 Introduction Introduction Page 51-52 Drill drivers compact drill driver SFC 22-A Page 53 hammer drill driver SFH 22-A Page 54 Accessories for drill drivers Page 57 Impact

More information

Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications

Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 2 D Universal lathes with toolmaking precision for industrial applications EMCOMAT 14 S/14 D EMCOMAT 17S/17D/2D The Technology The EMCOMAT 14 S/14

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

WH18DBDL2/JX 207Nm 18V Brushless Impact Driver WR18DBDL2/JX 18V Brushless Impact Wrench 305Nm

WH18DBDL2/JX 207Nm 18V Brushless Impact Driver WR18DBDL2/JX 18V Brushless Impact Wrench 305Nm WH18DBDL2/JX 18V Brushless Impact Driver 2 x 6.0Ah Li-Ion Triple hammer mechanism 207Nm hard torque 4 mode speed selection 38 minute charger with USB output Includes stackable case Driver bit not included

More information

Industrial. Ready when you are. RediPower. Tools

Industrial. Ready when you are. RediPower. Tools RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid

More information

Air Finishing Tools CP778. Heavy Duty Hi-Speed Sander

Air Finishing Tools CP778. Heavy Duty Hi-Speed Sander Air Finishing Tools Finishing work provides a wide range of challenges and we have a complete line of sanders, buffers and polishers for every application from heavy material removal to fine finishing.

More information

Universal. CNC Turning machine TNA500 TNA600

Universal. CNC Turning machine TNA500 TNA600 Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

More information

COMING IN 2006 MOVE TO A HIGHER POWER CORDLESS TOOL SYSTEM COMMENTS FROM FIELD TESTERS

COMING IN 2006 MOVE TO A HIGHER POWER CORDLESS TOOL SYSTEM COMMENTS FROM FIELD TESTERS COMING IN 06 V28 Rotary Hammer TM CORDLESS TOOL SYSTEM V28 Right Angle Drill V28 Job Site Radio COMMENTS FROM FIELD TESTERS This band saw is an awesome tool. They don t have any power on the job when I

More information

Cordless Power Tools. Ergonomic Design Balanced to Perfection

Cordless Power Tools. Ergonomic Design Balanced to Perfection Cordless Power Tools Ergonomic Design Balanced to Perfection 21 Cordless Power Tools: Engineered for Performance and Long Life Robust Housing Made of fibre glass reinforced polyamide for durability. Aluminum

More information

M E T A L W O R K I N G

M E T A L W O R K I N G M E TA LW O R K I N G 2009/2010 JET: 50 years of experience 50 years of high-quality machines 1958 The foundation of JET The flight with the first Boeing jet aeroplane from Seattle (USA) to Japan with

More information

Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)

Model. Reach into areas as small as 3/8. Model. Max. Air Flow SCFM (L/Min) The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and

More information

INNOVATIVE POWER IS OUR QUALITY

INNOVATIVE POWER IS OUR QUALITY INNOVATIVE POWER IS OUR QUALITY P3 MAXXHEAT 3 - in - 1 Multifunctional heater P11 GIRAFFE AIR Telescopic ladder P14 MAXXPACK 18 V 18 V Li-Ion collection Multifunctional: weeder, hot air gun and BBQ lighter

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28

More information

HAND & POWER TOOLS ALSO AVAILABLE FROM

HAND & POWER TOOLS ALSO AVAILABLE FROM HAND & POWER TOOLS ALSO AVAILABLE FROM Page 56 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225 * Maximum initial battery pack voltage (measured without a workload) is

More information

EGH-1880, ELITE 18X80 LARGE SPINDLE BORE CLUTCH LATHE

EGH-1880, ELITE 18X80 LARGE SPINDLE BORE CLUTCH LATHE When precision matters the most. The large spindle bore Elite lathes are the signature machines within the Elite lathe lineup. Engineered to meet world-class tolerances for spindle run out, bed alignment,

More information

More Power. More Brushless. More Advanced.

More Power. More Brushless. More Advanced. HUGE POWER UP 18V PROMO MAY-JULY 2017 HOT DEALS AND BONUSES More Power. More Brushless. More Advanced. INDUSTRY S QUICKEST CHARGER 0-6.0Ah in 38 minutes Rapid Smart Charger UC18YSL3 Features and Benefits

More information

Impressive technology lithium-ion batteries

Impressive technology lithium-ion batteries Cordless Working 400 Cordless Working Overview Bosch Accessories 11/12 Impressive technology lithium-ion batteries No memory effect : Convenient charging regardless of whether the battery is ¾ or ½ empty

More information

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic

More information

With the FastFix elbow adapter, you can also reach concealed screws easily and conveniently.

With the FastFix elbow adapter, you can also reach concealed screws easily and conveniently. With the FastFix elbow adapter, you can also reach concealed screws easily and conveniently. The FastFix depth stop guarantees exact, uniform screw-in depths. Fitted without tools and quickly replaced:

More information

Electric handtools Angle grinder Makita Flex Tools Fein Bosch Powertools. Flex angle grinders 230V 50/60Hz. Number Diameter Watt Type

Electric handtools Angle grinder Makita Flex Tools Fein Bosch Powertools. Flex angle grinders 230V 50/60Hz. Number Diameter Watt Type Electric handtools Angle grinder Makita Flex Tools Fein Bosch Powertools Flex angle grinders 230V 50/60Hz 54FL0576 115mm 800 L8-11 115 High performance angle grinder. Optimizedcooling system. Excellent

More information

Prices Valid While Quantities Last

Prices Valid While Quantities Last MODEL DESCRIPTION PRICE 831325-9 Small LXT Tool Bag $ 20.00 821010-X 14" Tool Bag $ 23.00 821007X 21" Tool Bag $ 28.00 831278-2 Large LXT Tool Bag $ 48.00 831269-3 LXT Tool Bag With Wheels $ 60.00 1 P

More information

Key product features. Other product advantages. Comes complete with

Key product features. Other product advantages. Comes complete with Impact Drill AdvancedImpact 900 The new AdvancedImpact 900 with innovative Bosch Kickback Control and 2-speed gearbox for DIYers with the highest demands on power and control Go to product Key product

More information

aeg POwErTOOLs POwEriNg PrOFEssiONaLs since 1898

aeg POwErTOOLs POwEriNg PrOFEssiONaLs since 1898 aeg POwErTOOLs POwEriNg PrOFEssiONaLs since 1898 aeg POwErTOOLs promises to draw upon its heritage and deliver exciting, high performance, innovative working solutions for the professional tradesmen of

More information

1/4 Cordless Precise Torque Screwdrivers BFT123FZ BFT081FZ BFT040FZ. 3/8 Cordless Precise Torque Angle Wrenches DFL300FZ DFL300FZ

1/4 Cordless Precise Torque Screwdrivers BFT123FZ BFT081FZ BFT040FZ. 3/8 Cordless Precise Torque Angle Wrenches DFL300FZ DFL300FZ 1/4 Precise Torque Screwdrivers DFT022FZ DFT044FZ BFT084FZ DFT126FZ Built in LED to illuminate tight spaces Extremely compact and lightweight for outstanding ergonomics Capacities On board LED and audible

More information

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20

More information

JET FINISHING. Surface Grinders Bench Grinders Accessories

JET FINISHING. Surface Grinders Bench Grinders Accessories Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING

More information

Quality Products for House and Garden. Garden Tools 2010

Quality Products for House and Garden. Garden Tools 2010 Quality Products for House and Garden Garden Tools 2010 Hand Lawn Mowers HRM 300 Item No.: 76001510 kg 15-42 mm 300 mm 7,4 kg Incl. grass bag Infinitely variable height 15 42 mm Simple adjustment of the

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

Injection Logo (Optional) To improve brand and product image. Soft Grip For comfortable use and higher working efficiency

Injection Logo (Optional) To improve brand and product image. Soft Grip For comfortable use and higher working efficiency The range covers full range of portable power tools, including Cordless Screwdriver, Cordless Drills, Impact Drills, Impact Wrench, Rotary Hammers, Demolition Hammer, Angle Grinders, Sanders, Jig Saws,

More information

Product Information G10SQ(H1) 4 (100mm) Angle Grinder

Product Information G10SQ(H1) 4 (100mm) Angle Grinder G10SQ(H1) 4 (100mm) Angle Grinder Two position handle Excellent overload durability 100mm Grinding disc Full length paddle switch Tool-less wheel guard 100mm Input power 840W 10,000 (min-1) 16mm Spindle

More information

KST 16 KST 16V KST 25 KSS 25V KSS

KST 16 KST 16V KST 25 KSS 25V KSS F KST 16V shown KSS 32 shown 186 Industrial Drill Presses KST KSS Rigid table (KST) and column drill presses (KSS) with large work tables Specifications KST 16 KST 16V KST 25 KSS 25V KSS 32 drilling capacity

More information

The new FEIN cordless drill/drivers extremely powerful! With over 115 years of expertise. YEAR. FEIN Plus GUARANTEE

The new FEIN cordless drill/drivers extremely powerful! With over 115 years of expertise. YEAR. FEIN Plus GUARANTEE Interior Construction The new FEIN cordless drill/drivers extremely powerful! With over 115 years of expertise. YEAR FEIN Plus GUARANTEE 3incl. li-ion batteries The most powerful FEIN cordless drill/driver

More information

Belt-and Disc Sanders ST-DS 300 M

Belt-and Disc Sanders ST-DS 300 M Belt-and Disc Sanders ST-DS 300 M Sanders Powerfull Motors Self-adhesive abrasive discs Tiltable cast iron tables ST-DS 300 M ST-DS 300 M Article-no. 66.890.89002.11 230 V 750 W 735 W 1420 RPM Belt size

More information

Profi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1

Profi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1 Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular

More information

M A C H I N E T O O L S CIRCULAR SAWS

M A C H I N E T O O L S CIRCULAR SAWS M A C H I N E T O O L S CIRCULAR SAWS HORIZON BROWN 425 SA SEMIAUTOMATIC CIRCULAR SAW Clamping vice adjustable Pressure Table rotation handwheel for rapid and accurate adjustment of cutting angle. Absorption

More information

COMFOrt, PErFOrManCE and SaFEty: world LEaDInG angle GrInDErS FrOM MEtaBO

COMFOrt, PErFOrManCE and SaFEty: world LEaDInG angle GrInDErS FrOM MEtaBO angle GrInDErS COMFOrt, PErFOrManCE and SaFEty: world LEaDInG angle GrInDErS FrOM MEtaBO For grinding, cutting, polishing or sanding, angle grinders by Metabo are world leaders. If there s one thing we

More information

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27

More information

Can handle more than 1 million screw connections.

Can handle more than 1 million screw connections. INTERIOR Can handle more than 1 million screw connections. FEIN drywall screw gun available as battery- or mains-powered tool. Brushless FEIN PowerDrive motor New from the drywall construction professionals:

More information

AIR TOOLS & ACCESSORIES AIR TOOLS & ACCESSORIES HI-FLO COUPLERS AIR TOOLS & ACCESSORIES ACCESSORIES. Hi-Flo & Couplers

AIR TOOLS & ACCESSORIES AIR TOOLS & ACCESSORIES HI-FLO COUPLERS AIR TOOLS & ACCESSORIES ACCESSORIES. Hi-Flo & Couplers HI-FLO Increased airflow to provide maximum torque and optimal performance Push-To-Connect for easy connect/disconnect Includes (1) Male Coupler, (2) Female Couplers, (3) Female Plugs, and (4) Male Plugs

More information

Fast Clip & Traklok Jaw Options (Quick Change Jaws)

Fast Clip & Traklok Jaw Options (Quick Change Jaws) Fast Clip & Traklok Jaw Options (Quick Change Jaws) Fastclip Clip up Jaws (standard on machine) Part No.: 1640146 28kg to 68kg/m Rail Fastclip Unclip jaw Jaws standard with Fastclip head 47-68 kg/m Rail,

More information

HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1")

HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1) TECHNICAL INFORMATION Model. Description HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1") CONCEPT AND MAIN APPLICATIONS HR2610 series models are 26mm (1") combination hammers adapted for

More information

Price list machines and accessories 2018

Price list machines and accessories 2018 Price list machines and accessories 2018 Welcome to FEIN your specialist in metal and interiors. FEIN is synonymous with extremely reliable application solutions for manual trades and industry when working

More information

Workpiece support can be readjusted without tools.

Workpiece support can be readjusted without tools. ESSENTIAL FOR EVERY WORKSHOP. Good tools are worth their weight in gold and should always be in perfect working order. Rust needs to be removed for example, or the screw driver needs to be ground. Whether

More information

ONE TOOL COMPANY 2018 POWER TOOLS

ONE TOOL COMPANY 2018 POWER TOOLS ONE TOOL COMPANY 2018 POWER TOOLS THE LEGACY DRILLS DRILLS KR5010-10 mm 550 W Single Speed Hammer Drill Power Input Chuck Size Speed Impact Rate 550 W 10 mm 2,800 rpm 47,600 bpm Max Drill Capacity Wood

More information

MetAl. Optimum core drilling with the new FEIN KBB core drilling units and HSS drill bits.

MetAl. Optimum core drilling with the new FEIN KBB core drilling units and HSS drill bits. MetAl Optimum core drilling with the new FEIN KBB core drilling units and HSS drill bits. Introduction New application solutions from FEIN. In 1895, FEIN invented the world s first electric hand drill.

More information

POWER TOOLS. Sawzall Reciprocating Saw. Hole Hawg. Super Sawzall w/360º Rotating Handle. Super HAWG Drill. Electricians R.A.D. Kit Super Sawzall w/cst

POWER TOOLS. Sawzall Reciprocating Saw. Hole Hawg. Super Sawzall w/360º Rotating Handle. Super HAWG Drill. Electricians R.A.D. Kit Super Sawzall w/cst POWER S Hole Hawg Sawzall Reciprocating Saw INCLUDES Pipe Handle & Carrying Case 1675-6: 1/2 HOLE HAWG Drill (Case Not Included) 1670-1: 1/2 HOLE HAWG Drill - 900 RPM Handles up to 4-5/8 in. selfeed bit

More information

BEVELLING MACHINES WELDING CARRIAGES

BEVELLING MACHINES WELDING CARRIAGES BEVELLING MACHINES WELDING CARRIAGES 2013 CATALOGUE www.trademastertools.com 1 BEVELLING MACHINES page 4 BM21 PORTABLE BEVELLER BM21S STAINLESS STEEL BEVELLER Single milling head with 10 indexable inserts

More information

Complex 3D Welding Made Easy

Complex 3D Welding Made Easy 3D 3-D WELDING TABLE SYSTEMS JIGS & FIXTURES AUTOMATION Complex 3D Welding Made Easy Quick and easy clean up Reduce down time Improve quality Call today for a FREE QUOTE 1.866.738.7039 www.forsteramerica.com

More information

1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)

1.1/2 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm

More information

HORIZONTAL PIVOT STYLE BAND SAWS

HORIZONTAL PIVOT STYLE BAND SAWS HORIZONTAL PIVOT STYLE BAND SAWS S-20 CAST IRON SAW HEAD Provides rigidity and less vibration when cutting. Ensures straight cuts and increases blade life! DIGITAL BAND TENSIONING DISPLAY Manual mechanical

More information

E-1236VS, ELITE 12X36 EVS LATHE

E-1236VS, ELITE 12X36 EVS LATHE EVS LATHES COMPACT. POWERFUL. PERFECTION. These lathes pack large lathe features into compact footprints that make them perfect for schools, small shops, and engineering labs. Featuring an Electro-magnetic

More information

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

INDEX. PAGE Adjustment mechanism for radial position of block on rotating INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,

More information

POWER TOOLS 08. designed to do more. Dealer stamp: Ryobi Technologies (UK) Limited Medina House, Fieldhouse Lane, Marlow, Bucks.

POWER TOOLS 08. designed to do more. Dealer stamp: Ryobi Technologies (UK) Limited Medina House, Fieldhouse Lane, Marlow, Bucks. designed to do more POWER TOOLS 08 Ryobi Technologies (UK) Limited Medina House, Fieldhouse Lane, Marlow, Bucks. SL7 1TB Tel: 01628 894 400 Fax: 01628 894 401 Email: sales@ryobipower.co.uk Web: www.ryobipower.co.uk

More information